types

type AcceleratorCount struct {

	// The maximum number of accelerators. If this parameter is not specified, there
	// is no maximum limit.
	Max *int32

	// The minimum number of accelerators. If this parameter is not specified, there
	// is no minimum limit.
	Min *int32
	// contains filtered or unexported fields
}

type AcceleratorCountRequest struct {

	// The maximum number of accelerators. To specify no maximum limit, omit this
	// parameter. To exclude accelerator-enabled instance types, set Max to 0 .
	Max *int32

	// The minimum number of accelerators. To specify no minimum limit, omit this
	// parameter.
	Min *int32
	// contains filtered or unexported fields
}

type AcceleratorManufacturer string

type AcceleratorName string

type AcceleratorTotalMemoryMiB struct {

	// The maximum amount of accelerator memory, in MiB. If this parameter is not
	// specified, there is no maximum limit.
	Max *int32

	// The minimum amount of accelerator memory, in MiB. If this parameter is not
	// specified, there is no minimum limit.
	Min *int32
	// contains filtered or unexported fields
}

type AcceleratorTotalMemoryMiBRequest struct {

	// The maximum amount of accelerator memory, in MiB. To specify no maximum limit,
	// omit this parameter.
	Max *int32

	// The minimum amount of accelerator memory, in MiB. To specify no minimum limit,
	// omit this parameter.
	Min *int32
	// contains filtered or unexported fields
}

type AcceleratorType string

type AccessScopeAnalysisFinding struct {

	// The finding components.
	FindingComponents []PathComponent

	// The ID of the finding.
	FindingId *string

	// The ID of the Network Access Scope analysis.
	NetworkInsightsAccessScopeAnalysisId *string

	// The ID of the Network Access Scope.
	NetworkInsightsAccessScopeId *string
	// contains filtered or unexported fields
}

type AccessScopePath struct {

	// The destination.
	Destination *PathStatement

	// The source.
	Source *PathStatement

	// The through resources.
	ThroughResources []ThroughResourcesStatement
	// contains filtered or unexported fields
}

type AccessScopePathRequest struct {

	// The destination.
	Destination *PathStatementRequest

	// The source.
	Source *PathStatementRequest

	// The through resources.
	ThroughResources []ThroughResourcesStatementRequest
	// contains filtered or unexported fields
}

type AccountAttribute struct {

	// The name of the account attribute.
	AttributeName *string

	// The values for the account attribute.
	AttributeValues []AccountAttributeValue
	// contains filtered or unexported fields
}

type AccountAttributeName string

type AccountAttributeValue struct {

	// The value of the attribute.
	AttributeValue *string
	// contains filtered or unexported fields
}

type ActiveInstance struct {

	// The health status of the instance. If the status of either the instance status
	// check or the system status check is impaired , the health status of the instance
	// is unhealthy . Otherwise, the health status is healthy .
	InstanceHealth InstanceHealthStatus

	// The ID of the instance.
	InstanceId *string

	// The instance type.
	InstanceType *string

	// The ID of the Spot Instance request.
	SpotInstanceRequestId *string
	// contains filtered or unexported fields
}

type ActivityStatus string

type AddIpamOperatingRegion struct {

	// The name of the operating Region.
	RegionName *string
	// contains filtered or unexported fields
}

type AddPrefixListEntry struct {

	// The CIDR block.
	//
	// This member is required.
	Cidr *string

	// A description for the entry. Constraints: Up to 255 characters in length.
	Description *string
	// contains filtered or unexported fields
}

type AddedPrincipal struct {

	// The Amazon Resource Name (ARN) of the principal.
	Principal *string

	// The type of principal.
	PrincipalType PrincipalType

	// The ID of the service.
	ServiceId *string

	// The ID of the service permission.
	ServicePermissionId *string
	// contains filtered or unexported fields
}

type AdditionalDetail struct {

	// The additional detail code.
	AdditionalDetailType *string

	// The path component.
	Component *AnalysisComponent

	// The load balancers.
	LoadBalancers []AnalysisComponent

	// The rule options.
	RuleGroupRuleOptionsPairs []RuleGroupRuleOptionsPair

	// The rule group type.
	RuleGroupTypePairs []RuleGroupTypePair

	// The rule options.
	RuleOptions []RuleOption

	// The name of the VPC endpoint service.
	ServiceName *string

	// The VPC endpoint service.
	VpcEndpointService *AnalysisComponent
	// contains filtered or unexported fields
}

type Address struct {

	// The ID representing the allocation of the address.
	AllocationId *string

	// The ID representing the association of the address with an instance.
	AssociationId *string

	// The carrier IP address associated. This option is only available for network
	// interfaces which reside in a subnet in a Wavelength Zone (for example an EC2
	// instance).
	CarrierIp *string

	// The customer-owned IP address.
	CustomerOwnedIp *string

	// The ID of the customer-owned address pool.
	CustomerOwnedIpv4Pool *string

	// The network ( vpc ).
	Domain DomainType

	// The ID of the instance that the address is associated with (if any).
	InstanceId *string

	// The name of the unique set of Availability Zones, Local Zones, or Wavelength
	// Zones from which Amazon Web Services advertises IP addresses.
	NetworkBorderGroup *string

	// The ID of the network interface.
	NetworkInterfaceId *string

	// The ID of the Amazon Web Services account that owns the network interface.
	NetworkInterfaceOwnerId *string

	// The private IP address associated with the Elastic IP address.
	PrivateIpAddress *string

	// The Elastic IP address.
	PublicIp *string

	// The ID of an address pool.
	PublicIpv4Pool *string

	// Any tags assigned to the Elastic IP address.
	Tags []Tag
	// contains filtered or unexported fields
}

type AddressAttribute struct {

	// [EC2-VPC] The allocation ID.
	AllocationId *string

	// The pointer (PTR) record for the IP address.
	PtrRecord *string

	// The updated PTR record for the IP address.
	PtrRecordUpdate *PtrUpdateStatus

	// The public IP address.
	PublicIp *string
	// contains filtered or unexported fields
}

type AddressAttributeName string

type AddressFamily string

type AddressTransfer struct {

	// The Elastic IP address transfer status.
	AddressTransferStatus AddressTransferStatus

	// The allocation ID of an Elastic IP address.
	AllocationId *string

	// The Elastic IP address being transferred.
	PublicIp *string

	// The ID of the account that you want to transfer the Elastic IP address to.
	TransferAccountId *string

	// The timestamp when the Elastic IP address transfer was accepted.
	TransferOfferAcceptedTimestamp *time.Time

	// The timestamp when the Elastic IP address transfer expired. When the source
	// account starts the transfer, the transfer account has seven hours to allocate
	// the Elastic IP address to complete the transfer, or the Elastic IP address will
	// return to its original owner.
	TransferOfferExpirationTimestamp *time.Time
	// contains filtered or unexported fields
}

type AddressTransferStatus string

type Affinity string

type AllocationState string

type AllocationStrategy string

type AllocationType string

type AllowedPrincipal struct {

	// The Amazon Resource Name (ARN) of the principal.
	Principal *string

	// The type of principal.
	PrincipalType PrincipalType

	// The ID of the service.
	ServiceId *string

	// The ID of the service permission.
	ServicePermissionId *string

	// The tags.
	Tags []Tag
	// contains filtered or unexported fields
}

type AllowsMultipleInstanceTypes string

type AlternatePathHint struct {

	// The Amazon Resource Name (ARN) of the component.
	ComponentArn *string

	// The ID of the component.
	ComponentId *string
	// contains filtered or unexported fields
}

type AmdSevSnpSpecification string

type AnalysisAclRule struct {

	// The IPv4 address range, in CIDR notation.
	Cidr *string

	// Indicates whether the rule is an outbound rule.
	Egress *bool

	// The range of ports.
	PortRange *PortRange

	// The protocol.
	Protocol *string

	// Indicates whether to allow or deny traffic that matches the rule.
	RuleAction *string

	// The rule number.
	RuleNumber *int32
	// contains filtered or unexported fields
}

type AnalysisComponent struct {

	// The Amazon Resource Name (ARN) of the component.
	Arn *string

	// The ID of the component.
	Id *string

	// The name of the analysis component.
	Name *string
	// contains filtered or unexported fields
}

type AnalysisLoadBalancerListener struct {

	// [Classic Load Balancers] The back-end port for the listener.
	InstancePort *int32

	// The port on which the load balancer is listening.
	LoadBalancerPort *int32
	// contains filtered or unexported fields
}

type AnalysisLoadBalancerTarget struct {

	// The IP address.
	Address *string

	// The Availability Zone.
	AvailabilityZone *string

	// Information about the instance.
	Instance *AnalysisComponent

	// The port on which the target is listening.
	Port *int32
	// contains filtered or unexported fields
}

type AnalysisPacketHeader struct {

	// The destination addresses.
	DestinationAddresses []string

	// The destination port ranges.
	DestinationPortRanges []PortRange

	// The protocol.
	Protocol *string

	// The source addresses.
	SourceAddresses []string

	// The source port ranges.
	SourcePortRanges []PortRange
	// contains filtered or unexported fields
}

type AnalysisRouteTableRoute struct {

	// The ID of a carrier gateway.
	CarrierGatewayId *string

	// The Amazon Resource Name (ARN) of a core network.
	CoreNetworkArn *string

	// The destination IPv4 address, in CIDR notation.
	DestinationCidr *string

	// The prefix of the Amazon Web Service.
	DestinationPrefixListId *string

	// The ID of an egress-only internet gateway.
	EgressOnlyInternetGatewayId *string

	// The ID of the gateway, such as an internet gateway or virtual private gateway.
	GatewayId *string

	// The ID of the instance, such as a NAT instance.
	InstanceId *string

	// The ID of a local gateway.
	LocalGatewayId *string

	// The ID of a NAT gateway.
	NatGatewayId *string

	// The ID of a network interface.
	NetworkInterfaceId *string

	// Describes how the route was created. The following are the possible values:
	//   - CreateRouteTable - The route was automatically created when the route table
	//   was created.
	//   - CreateRoute - The route was manually added to the route table.
	//   - EnableVgwRoutePropagation - The route was propagated by route propagation.
	Origin *string

	// The state. The following are the possible values:
	//   - active
	//   - blackhole
	State *string

	// The ID of a transit gateway.
	TransitGatewayId *string

	// The ID of a VPC peering connection.
	VpcPeeringConnectionId *string
	// contains filtered or unexported fields
}

type AnalysisSecurityGroupRule struct {

	// The IPv4 address range, in CIDR notation.
	Cidr *string

	// The direction. The following are the possible values:
	//   - egress
	//   - ingress
	Direction *string

	// The port range.
	PortRange *PortRange

	// The prefix list ID.
	PrefixListId *string

	// The protocol name.
	Protocol *string

	// The security group ID.
	SecurityGroupId *string
	// contains filtered or unexported fields
}

type AnalysisStatus string

type ApplianceModeSupportValue string

type ArchitectureType string

type ArchitectureValues string

type AsnAssociation struct {

	// The association's ASN.
	Asn *string

	// The association's CIDR.
	Cidr *string

	// The association's state.
	State AsnAssociationState

	// The association's status message.
	StatusMessage *string
	// contains filtered or unexported fields
}

type AsnAssociationState string

type AsnAuthorizationContext struct {

	// The authorization context's message.
	//
	// This member is required.
	Message *string

	// The authorization context's signature.
	//
	// This member is required.
	Signature *string
	// contains filtered or unexported fields
}

type AsnState string

type AssignedPrivateIpAddress struct {

	// The private IP address assigned to the network interface.
	PrivateIpAddress *string
	// contains filtered or unexported fields
}

type AssociatedNetworkType string

type AssociatedRole struct {

	// The ARN of the associated IAM role.
	AssociatedRoleArn *string

	// The name of the Amazon S3 bucket in which the Amazon S3 object is stored.
	CertificateS3BucketName *string

	// The key of the Amazon S3 object ey where the certificate, certificate chain,
	// and encrypted private key bundle is stored. The object key is formated as
	// follows: role_arn / certificate_arn .
	CertificateS3ObjectKey *string

	// The ID of the KMS customer master key (CMK) used to encrypt the private key.
	EncryptionKmsKeyId *string
	// contains filtered or unexported fields
}

type AssociatedTargetNetwork struct {

	// The ID of the subnet.
	NetworkId *string

	// The target network type.
	NetworkType AssociatedNetworkType
	// contains filtered or unexported fields
}

type AssociationStatus struct {

	// The state of the target network association.
	Code AssociationStatusCode

	// A message about the status of the target network association, if applicable.
	Message *string
	// contains filtered or unexported fields
}

type AssociationStatusCode string

type AthenaIntegration struct {

	// The location in Amazon S3 to store the generated CloudFormation template.
	//
	// This member is required.
	IntegrationResultS3DestinationArn *string

	// The schedule for adding new partitions to the table.
	//
	// This member is required.
	PartitionLoadFrequency PartitionLoadFrequency

	// The end date for the partition.
	PartitionEndDate *time.Time

	// The start date for the partition.
	PartitionStartDate *time.Time
	// contains filtered or unexported fields
}

type AttachmentEnaSrdSpecification struct {

	// Indicates whether ENA Express is enabled for the network interface.
	EnaSrdEnabled *bool

	// Configures ENA Express for UDP network traffic.
	EnaSrdUdpSpecification *AttachmentEnaSrdUdpSpecification
	// contains filtered or unexported fields
}

type AttachmentEnaSrdUdpSpecification struct {

	// Indicates whether UDP traffic to and from the instance uses ENA Express. To
	// specify this setting, you must first enable ENA Express.
	EnaSrdUdpEnabled *bool
	// contains filtered or unexported fields
}

type AttachmentStatus string

type AttributeBooleanValue struct {

	// The attribute value. The valid values are true or false .
	Value *bool
	// contains filtered or unexported fields
}

type AttributeValue struct {

	// The attribute value. The value is case-sensitive.
	Value *string
	// contains filtered or unexported fields
}

type AuthorizationRule struct {

	// Indicates whether the authorization rule grants access to all clients.
	AccessAll *bool

	// The ID of the Client VPN endpoint with which the authorization rule is
	// associated.
	ClientVpnEndpointId *string

	// A brief description of the authorization rule.
	Description *string

	// The IPv4 address range, in CIDR notation, of the network to which the
	// authorization rule applies.
	DestinationCidr *string

	// The ID of the Active Directory group to which the authorization rule grants
	// access.
	GroupId *string

	// The current state of the authorization rule.
	Status *ClientVpnAuthorizationRuleStatus
	// contains filtered or unexported fields
}

type AutoAcceptSharedAssociationsValue string

type AutoAcceptSharedAttachmentsValue string

type AutoPlacement string

type AvailabilityZone struct {

	// For Availability Zones, this parameter has the same value as the Region name.
	// For Local Zones, the name of the associated group, for example us-west-2-lax-1 .
	// For Wavelength Zones, the name of the associated group, for example
	// us-east-1-wl1-bos-wlz-1 .
	GroupName *string

	// Any messages about the Availability Zone, Local Zone, or Wavelength Zone.
	Messages []AvailabilityZoneMessage

	// The name of the network border group.
	NetworkBorderGroup *string

	// For Availability Zones, this parameter always has the value of
	// opt-in-not-required . For Local Zones and Wavelength Zones, this parameter is
	// the opt-in status. The possible values are opted-in , and not-opted-in .
	OptInStatus AvailabilityZoneOptInStatus

	// The ID of the zone that handles some of the Local Zone or Wavelength Zone
	// control plane operations, such as API calls.
	ParentZoneId *string

	// The name of the zone that handles some of the Local Zone or Wavelength Zone
	// control plane operations, such as API calls.
	ParentZoneName *string

	// The name of the Region.
	RegionName *string

	// The state of the Availability Zone, Local Zone, or Wavelength Zone. This value
	// is always available .
	State AvailabilityZoneState

	// The ID of the Availability Zone, Local Zone, or Wavelength Zone.
	ZoneId *string

	// The name of the Availability Zone, Local Zone, or Wavelength Zone.
	ZoneName *string

	// The type of zone. The valid values are availability-zone , local-zone , and
	// wavelength-zone .
	ZoneType *string
	// contains filtered or unexported fields
}

type AvailabilityZoneMessage struct {

	// The message about the Availability Zone, Local Zone, or Wavelength Zone.
	Message *string
	// contains filtered or unexported fields
}

type AvailabilityZoneOptInStatus string

type AvailabilityZoneState string

type AvailableCapacity struct {

	// The number of instances that can be launched onto the Dedicated Host depending
	// on the host's available capacity. For Dedicated Hosts that support multiple
	// instance types, this parameter represents the number of instances for each
	// instance size that is supported on the host.
	AvailableInstanceCapacity []InstanceCapacity

	// The number of vCPUs available for launching instances onto the Dedicated Host.
	AvailableVCpus *int32
	// contains filtered or unexported fields
}

type BareMetal string

type BaselineEbsBandwidthMbps struct {

	// The maximum baseline bandwidth, in Mbps. If this parameter is not specified,
	// there is no maximum limit.
	Max *int32

	// The minimum baseline bandwidth, in Mbps. If this parameter is not specified,
	// there is no minimum limit.
	Min *int32
	// contains filtered or unexported fields
}

type BaselineEbsBandwidthMbpsRequest struct {

	// The maximum baseline bandwidth, in Mbps. To specify no maximum limit, omit this
	// parameter.
	Max *int32

	// The minimum baseline bandwidth, in Mbps. To specify no minimum limit, omit this
	// parameter.
	Min *int32
	// contains filtered or unexported fields
}

type BatchState string

type BgpStatus string

type BlobAttributeValue struct {
	Value []byte
	// contains filtered or unexported fields
}

type BlockDeviceMapping struct {

	// The device name (for example, /dev/sdh or xvdh ).
	DeviceName *string

	// Parameters used to automatically set up EBS volumes when the instance is
	// launched.
	Ebs *EbsBlockDevice

	// To omit the device from the block device mapping, specify an empty string. When
	// this property is specified, the device is removed from the block device mapping
	// regardless of the assigned value.
	NoDevice *string

	// The virtual device name ( ephemeral N). Instance store volumes are numbered
	// starting from 0. An instance type with 2 available instance store volumes can
	// specify mappings for ephemeral0 and ephemeral1 . The number of available
	// instance store volumes depends on the instance type. After you connect to the
	// instance, you must mount the volume. NVMe instance store volumes are
	// automatically enumerated and assigned a device name. Including them in your
	// block device mapping has no effect. Constraints: For M3 instances, you must
	// specify instance store volumes in the block device mapping for the instance.
	// When you launch an M3 instance, we ignore any instance store volumes specified
	// in the block device mapping for the AMI.
	VirtualName *string
	// contains filtered or unexported fields
}

type BootModeType string

type BootModeValues string

type BundleTask struct {

	// The ID of the bundle task.
	BundleId *string

	// If the task fails, a description of the error.
	BundleTaskError *BundleTaskError

	// The ID of the instance associated with this bundle task.
	InstanceId *string

	// The level of task completion, as a percent (for example, 20%).
	Progress *string

	// The time this task started.
	StartTime *time.Time

	// The state of the task.
	State BundleTaskState

	// The Amazon S3 storage locations.
	Storage *Storage

	// The time of the most recent update for the task.
	UpdateTime *time.Time
	// contains filtered or unexported fields
}

type BundleTaskError struct {

	// The error code.
	Code *string

	// The error message.
	Message *string
	// contains filtered or unexported fields
}

type BundleTaskState string

type BurstablePerformance string

type Byoasn struct {

	// A public 2-byte or 4-byte ASN.
	Asn *string

	// An IPAM ID.
	IpamId *string

	// The provisioning state of the BYOASN.
	State AsnState

	// The status message.
	StatusMessage *string
	// contains filtered or unexported fields
}

type ByoipCidr struct {

	// The BYOIP CIDR associations with ASNs.
	AsnAssociations []AsnAssociation

	// The address range, in CIDR notation.
	Cidr *string

	// The description of the address range.
	Description *string

	// If you have Local Zones (https://docs.aws.amazon.com/local-zones/latest/ug/how-local-zones-work.html)
	// enabled, you can choose a network border group for Local Zones when you
	// provision and advertise a BYOIPv4 CIDR. Choose the network border group
	// carefully as the EIP and the Amazon Web Services resource it is associated with
	// must reside in the same network border group. You can provision BYOIP address
	// ranges to and advertise them in the following Local Zone network border groups:
	//   - us-east-1-dfw-2
	//   - us-west-2-lax-1
	//   - us-west-2-phx-2
	// You cannot provision or advertise BYOIPv6 address ranges in Local Zones at this
	// time.
	NetworkBorderGroup *string

	// The state of the address pool.
	State ByoipCidrState

	// Upon success, contains the ID of the address pool. Otherwise, contains an error
	// message.
	StatusMessage *string
	// contains filtered or unexported fields
}

type ByoipCidrState string

type CancelBatchErrorCode string

type CancelCapacityReservationFleetError struct {

	// The error code.
	Code *string

	// The error message.
	Message *string
	// contains filtered or unexported fields
}

type CancelSpotFleetRequestsError struct {

	// The error code.
	Code CancelBatchErrorCode

	// The description for the error code.
	Message *string
	// contains filtered or unexported fields
}

type CancelSpotFleetRequestsErrorItem struct {

	// The error.
	Error *CancelSpotFleetRequestsError

	// The ID of the Spot Fleet request.
	SpotFleetRequestId *string
	// contains filtered or unexported fields
}

type CancelSpotFleetRequestsSuccessItem struct {

	// The current state of the Spot Fleet request.
	CurrentSpotFleetRequestState BatchState

	// The previous state of the Spot Fleet request.
	PreviousSpotFleetRequestState BatchState

	// The ID of the Spot Fleet request.
	SpotFleetRequestId *string
	// contains filtered or unexported fields
}

type CancelSpotInstanceRequestState string

type CancelledSpotInstanceRequest struct {

	// The ID of the Spot Instance request.
	SpotInstanceRequestId *string

	// The state of the Spot Instance request.
	State CancelSpotInstanceRequestState
	// contains filtered or unexported fields
}

type CapacityAllocation struct {

	// The usage type. used indicates that the instance capacity is in use by
	// instances that are running in the Capacity Reservation.
	AllocationType AllocationType

	// The amount of instance capacity associated with the usage. For example a value
	// of 4 indicates that instance capacity for 4 instances is currently in use.
	Count *int32
	// contains filtered or unexported fields
}

type CapacityBlockOffering struct {

	// The Availability Zone of the Capacity Block offering.
	AvailabilityZone *string

	// The amount of time of the Capacity Block reservation in hours.
	CapacityBlockDurationHours *int32

	// The ID of the Capacity Block offering.
	CapacityBlockOfferingId *string

	// The currency of the payment for the Capacity Block.
	CurrencyCode *string

	// The end date of the Capacity Block offering.
	EndDate *time.Time

	// The number of instances in the Capacity Block offering.
	InstanceCount *int32

	// The instance type of the Capacity Block offering.
	InstanceType *string

	// The start date of the Capacity Block offering.
	StartDate *time.Time

	// The tenancy of the Capacity Block.
	Tenancy CapacityReservationTenancy

	// The total price to be paid up front.
	UpfrontFee *string
	// contains filtered or unexported fields
}

type CapacityReservation struct {

	// The Availability Zone in which the capacity is reserved.
	AvailabilityZone *string

	// The Availability Zone ID of the Capacity Reservation.
	AvailabilityZoneId *string

	// The remaining capacity. Indicates the number of instances that can be launched
	// in the Capacity Reservation.
	AvailableInstanceCount *int32

	// Information about instance capacity usage.
	CapacityAllocations []CapacityAllocation

	// The Amazon Resource Name (ARN) of the Capacity Reservation.
	CapacityReservationArn *string

	// The ID of the Capacity Reservation Fleet to which the Capacity Reservation
	// belongs. Only valid for Capacity Reservations that were created by a Capacity
	// Reservation Fleet.
	CapacityReservationFleetId *string

	// The ID of the Capacity Reservation.
	CapacityReservationId *string

	// The date and time at which the Capacity Reservation was created.
	CreateDate *time.Time

	// Indicates whether the Capacity Reservation supports EBS-optimized instances.
	// This optimization provides dedicated throughput to Amazon EBS and an optimized
	// configuration stack to provide optimal I/O performance. This optimization isn't
	// available with all instance types. Additional usage charges apply when using an
	// EBS- optimized instance.
	EbsOptimized *bool

	// The date and time at which the Capacity Reservation expires. When a Capacity
	// Reservation expires, the reserved capacity is released and you can no longer
	// launch instances into it. The Capacity Reservation's state changes to expired
	// when it reaches its end date and time.
	EndDate *time.Time

	// Indicates the way in which the Capacity Reservation ends. A Capacity
	// Reservation can have one of the following end types:
	//   - unlimited - The Capacity Reservation remains active until you explicitly
	//   cancel it.
	//   - limited - The Capacity Reservation expires automatically at a specified date
	//   and time.
	EndDateType EndDateType

	// Deprecated.
	EphemeralStorage *bool

	// Indicates the type of instance launches that the Capacity Reservation accepts.
	// The options include:
	//   - open - The Capacity Reservation accepts all instances that have matching
	//   attributes (instance type, platform, and Availability Zone). Instances that have
	//   matching attributes launch into the Capacity Reservation automatically without
	//   specifying any additional parameters.
	//   - targeted - The Capacity Reservation only accepts instances that have
	//   matching attributes (instance type, platform, and Availability Zone), and
	//   explicitly target the Capacity Reservation. This ensures that only permitted
	//   instances can use the reserved capacity.
	InstanceMatchCriteria InstanceMatchCriteria

	// The type of operating system for which the Capacity Reservation reserves
	// capacity.
	InstancePlatform CapacityReservationInstancePlatform

	// The type of instance for which the Capacity Reservation reserves capacity.
	InstanceType *string

	// The Amazon Resource Name (ARN) of the Outpost on which the Capacity Reservation
	// was created.
	OutpostArn *string

	// The ID of the Amazon Web Services account that owns the Capacity Reservation.
	OwnerId *string

	// The Amazon Resource Name (ARN) of the cluster placement group in which the
	// Capacity Reservation was created. For more information, see Capacity
	// Reservations for cluster placement groups (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/cr-cpg.html)
	// in the Amazon EC2 User Guide.
	PlacementGroupArn *string

	// The type of Capacity Reservation.
	ReservationType CapacityReservationType

	// The date and time at which the Capacity Reservation was started.
	StartDate *time.Time

	// The current state of the Capacity Reservation. A Capacity Reservation can be in
	// one of the following states:
	//   - active - The Capacity Reservation is active and the capacity is available
	//   for your use.
	//   - expired - The Capacity Reservation expired automatically at the date and
	//   time specified in your request. The reserved capacity is no longer available for
	//   your use.
	//   - cancelled - The Capacity Reservation was cancelled. The reserved capacity is
	//   no longer available for your use.
	//   - pending - The Capacity Reservation request was successful but the capacity
	//   provisioning is still pending.
	//   - failed - The Capacity Reservation request has failed. A request might fail
	//   due to invalid request parameters, capacity constraints, or instance limit
	//   constraints. Failed requests are retained for 60 minutes.
	State CapacityReservationState

	// Any tags assigned to the Capacity Reservation.
	Tags []Tag

	// Indicates the tenancy of the Capacity Reservation. A Capacity Reservation can
	// have one of the following tenancy settings:
	//   - default - The Capacity Reservation is created on hardware that is shared
	//   with other Amazon Web Services accounts.
	//   - dedicated - The Capacity Reservation is created on single-tenant hardware
	//   that is dedicated to a single Amazon Web Services account.
	Tenancy CapacityReservationTenancy

	// The total number of instances for which the Capacity Reservation reserves
	// capacity.
	TotalInstanceCount *int32
	// contains filtered or unexported fields
}

type CapacityReservationFleet struct {

	// The strategy used by the Capacity Reservation Fleet to determine which of the
	// specified instance types to use. For more information, see For more information,
	// see Allocation strategy (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/crfleet-concepts.html#allocation-strategy)
	// in the Amazon EC2 User Guide.
	AllocationStrategy *string

	// The ARN of the Capacity Reservation Fleet.
	CapacityReservationFleetArn *string

	// The ID of the Capacity Reservation Fleet.
	CapacityReservationFleetId *string

	// The date and time at which the Capacity Reservation Fleet was created.
	CreateTime *time.Time

	// The date and time at which the Capacity Reservation Fleet expires.
	EndDate *time.Time

	// Indicates the type of instance launches that the Capacity Reservation Fleet
	// accepts. All Capacity Reservations in the Fleet inherit this instance matching
	// criteria. Currently, Capacity Reservation Fleets support open instance matching
	// criteria only. This means that instances that have matching attributes (instance
	// type, platform, and Availability Zone) run in the Capacity Reservations
	// automatically. Instances do not need to explicitly target a Capacity Reservation
	// Fleet to use its reserved capacity.
	InstanceMatchCriteria FleetInstanceMatchCriteria

	// Information about the instance types for which to reserve the capacity.
	InstanceTypeSpecifications []FleetCapacityReservation

	// The state of the Capacity Reservation Fleet. Possible states include:
	//   - submitted - The Capacity Reservation Fleet request has been submitted and
	//   Amazon Elastic Compute Cloud is preparing to create the Capacity Reservations.
	//   - modifying - The Capacity Reservation Fleet is being modified. The Fleet
	//   remains in this state until the modification is complete.
	//   - active - The Capacity Reservation Fleet has fulfilled its total target
	//   capacity and it is attempting to maintain this capacity. The Fleet remains in
	//   this state until it is modified or deleted.
	//   - partially_fulfilled - The Capacity Reservation Fleet has partially fulfilled
	//   its total target capacity. There is insufficient Amazon EC2 to fulfill the total
	//   target capacity. The Fleet is attempting to asynchronously fulfill its total
	//   target capacity.
	//   - expiring - The Capacity Reservation Fleet has reach its end date and it is
	//   in the process of expiring. One or more of its Capacity reservations might still
	//   be active.
	//   - expired - The Capacity Reservation Fleet has reach its end date. The Fleet
	//   and its Capacity Reservations are expired. The Fleet can't create new Capacity
	//   Reservations.
	//   - cancelling - The Capacity Reservation Fleet is in the process of being
	//   cancelled. One or more of its Capacity reservations might still be active.
	//   - cancelled - The Capacity Reservation Fleet has been manually cancelled. The
	//   Fleet and its Capacity Reservations are cancelled and the Fleet can't create new
	//   Capacity Reservations.
	//   - failed - The Capacity Reservation Fleet failed to reserve capacity for the
	//   specified instance types.
	State CapacityReservationFleetState

	// The tags assigned to the Capacity Reservation Fleet.
	Tags []Tag

	// The tenancy of the Capacity Reservation Fleet. Tenancies include:
	//   - default - The Capacity Reservation Fleet is created on hardware that is
	//   shared with other Amazon Web Services accounts.
	//   - dedicated - The Capacity Reservation Fleet is created on single-tenant
	//   hardware that is dedicated to a single Amazon Web Services account.
	Tenancy FleetCapacityReservationTenancy

	// The capacity units that have been fulfilled.
	TotalFulfilledCapacity *float64

	// The total number of capacity units for which the Capacity Reservation Fleet
	// reserves capacity. For more information, see Total target capacity (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/crfleet-concepts.html#target-capacity)
	// in the Amazon EC2 User Guide.
	TotalTargetCapacity *int32
	// contains filtered or unexported fields
}

type CapacityReservationFleetCancellationState struct {

	// The ID of the Capacity Reservation Fleet that was successfully cancelled.
	CapacityReservationFleetId *string

	// The current state of the Capacity Reservation Fleet.
	CurrentFleetState CapacityReservationFleetState

	// The previous state of the Capacity Reservation Fleet.
	PreviousFleetState CapacityReservationFleetState
	// contains filtered or unexported fields
}

type CapacityReservationFleetState string

type CapacityReservationGroup struct {

	// The ARN of the resource group.
	GroupArn *string

	// The ID of the Amazon Web Services account that owns the resource group.
	OwnerId *string
	// contains filtered or unexported fields
}

type CapacityReservationInstancePlatform string

type CapacityReservationOptions struct {

	// Indicates whether to use unused Capacity Reservations for fulfilling On-Demand
	// capacity. If you specify use-capacity-reservations-first , the fleet uses unused
	// Capacity Reservations to fulfill On-Demand capacity up to the target On-Demand
	// capacity. If multiple instance pools have unused Capacity Reservations, the
	// On-Demand allocation strategy ( lowest-price or prioritized ) is applied. If the
	// number of unused Capacity Reservations is less than the On-Demand target
	// capacity, the remaining On-Demand target capacity is launched according to the
	// On-Demand allocation strategy ( lowest-price or prioritized ). If you do not
	// specify a value, the fleet fulfils the On-Demand capacity according to the
	// chosen On-Demand allocation strategy.
	UsageStrategy FleetCapacityReservationUsageStrategy
	// contains filtered or unexported fields
}

type CapacityReservationOptionsRequest struct {

	// Indicates whether to use unused Capacity Reservations for fulfilling On-Demand
	// capacity. If you specify use-capacity-reservations-first , the fleet uses unused
	// Capacity Reservations to fulfill On-Demand capacity up to the target On-Demand
	// capacity. If multiple instance pools have unused Capacity Reservations, the
	// On-Demand allocation strategy ( lowest-price or prioritized ) is applied. If the
	// number of unused Capacity Reservations is less than the On-Demand target
	// capacity, the remaining On-Demand target capacity is launched according to the
	// On-Demand allocation strategy ( lowest-price or prioritized ). If you do not
	// specify a value, the fleet fulfils the On-Demand capacity according to the
	// chosen On-Demand allocation strategy.
	UsageStrategy FleetCapacityReservationUsageStrategy
	// contains filtered or unexported fields
}

type CapacityReservationPreference string

type CapacityReservationSpecification struct {

	// Indicates the instance's Capacity Reservation preferences. Possible preferences
	// include:
	//   - open - The instance can run in any open Capacity Reservation that has
	//   matching attributes (instance type, platform, Availability Zone).
	//   - none - The instance avoids running in a Capacity Reservation even if one is
	//   available. The instance runs as an On-Demand Instance.
	CapacityReservationPreference CapacityReservationPreference

	// Information about the target Capacity Reservation or Capacity Reservation group.
	CapacityReservationTarget *CapacityReservationTarget
	// contains filtered or unexported fields
}

type CapacityReservationSpecificationResponse struct {

	// Describes the instance's Capacity Reservation preferences. Possible preferences
	// include:
	//   - open - The instance can run in any open Capacity Reservation that has
	//   matching attributes (instance type, platform, Availability Zone).
	//   - none - The instance avoids running in a Capacity Reservation even if one is
	//   available. The instance runs in On-Demand capacity.
	CapacityReservationPreference CapacityReservationPreference

	// Information about the targeted Capacity Reservation or Capacity Reservation
	// group.
	CapacityReservationTarget *CapacityReservationTargetResponse
	// contains filtered or unexported fields
}

type CapacityReservationState string

type CapacityReservationTarget struct {

	// The ID of the Capacity Reservation in which to run the instance.
	CapacityReservationId *string

	// The ARN of the Capacity Reservation resource group in which to run the instance.
	CapacityReservationResourceGroupArn *string
	// contains filtered or unexported fields
}

type CapacityReservationTargetResponse struct {

	// The ID of the targeted Capacity Reservation.
	CapacityReservationId *string

	// The ARN of the targeted Capacity Reservation group.
	CapacityReservationResourceGroupArn *string
	// contains filtered or unexported fields
}

type CapacityReservationTenancy string

type CapacityReservationType string

type CarrierGateway struct {

	// The ID of the carrier gateway.
	CarrierGatewayId *string

	// The Amazon Web Services account ID of the owner of the carrier gateway.
	OwnerId *string

	// The state of the carrier gateway.
	State CarrierGatewayState

	// The tags assigned to the carrier gateway.
	Tags []Tag

	// The ID of the VPC associated with the carrier gateway.
	VpcId *string
	// contains filtered or unexported fields
}

type CarrierGatewayState string

type CertificateAuthentication struct {

	// The ARN of the client certificate.
	ClientRootCertificateChain *string
	// contains filtered or unexported fields
}

type CertificateAuthenticationRequest struct {

	// The ARN of the client certificate. The certificate must be signed by a
	// certificate authority (CA) and it must be provisioned in Certificate Manager
	// (ACM).
	ClientRootCertificateChainArn *string
	// contains filtered or unexported fields
}

type CidrAuthorizationContext struct {

	// The plain-text authorization message for the prefix and account.
	//
	// This member is required.
	Message *string

	// The signed authorization message for the prefix and account.
	//
	// This member is required.
	Signature *string
	// contains filtered or unexported fields
}

type CidrBlock struct {

	// The IPv4 CIDR block.
	CidrBlock *string
	// contains filtered or unexported fields
}

type ClassicLinkDnsSupport struct {

	// Indicates whether ClassicLink DNS support is enabled for the VPC.
	ClassicLinkDnsSupported *bool

	// The ID of the VPC.
	VpcId *string
	// contains filtered or unexported fields
}

type ClassicLinkInstance struct {

	// The security groups.
	Groups []GroupIdentifier

	// The ID of the instance.
	InstanceId *string

	// Any tags assigned to the instance.
	Tags []Tag

	// The ID of the VPC.
	VpcId *string
	// contains filtered or unexported fields
}

type ClassicLoadBalancer struct {

	// The name of the load balancer.
	Name *string
	// contains filtered or unexported fields
}

type ClassicLoadBalancersConfig struct {

	// One or more Classic Load Balancers.
	ClassicLoadBalancers []ClassicLoadBalancer
	// contains filtered or unexported fields
}

type ClientCertificateRevocationListStatus struct {

	// The state of the client certificate revocation list.
	Code ClientCertificateRevocationListStatusCode

	// A message about the status of the client certificate revocation list, if
	// applicable.
	Message *string
	// contains filtered or unexported fields
}

type ClientCertificateRevocationListStatusCode string

type ClientConnectOptions struct {

	// Indicates whether client connect options are enabled. The default is false (not
	// enabled).
	Enabled *bool

	// The Amazon Resource Name (ARN) of the Lambda function used for connection
	// authorization.
	LambdaFunctionArn *string
	// contains filtered or unexported fields
}

type ClientConnectResponseOptions struct {

	// Indicates whether client connect options are enabled.
	Enabled *bool

	// The Amazon Resource Name (ARN) of the Lambda function used for connection
	// authorization.
	LambdaFunctionArn *string

	// The status of any updates to the client connect options.
	Status *ClientVpnEndpointAttributeStatus
	// contains filtered or unexported fields
}

type ClientData struct {

	// A user-defined comment about the disk upload.
	Comment *string

	// The time that the disk upload ends.
	UploadEnd *time.Time

	// The size of the uploaded disk image, in GiB.
	UploadSize *float64

	// The time that the disk upload starts.
	UploadStart *time.Time
	// contains filtered or unexported fields
}

type ClientLoginBannerOptions struct {

	// Customizable text that will be displayed in a banner on Amazon Web Services
	// provided clients when a VPN session is established. UTF-8 encoded characters
	// only. Maximum of 1400 characters.
	BannerText *string

	// Enable or disable a customizable text banner that will be displayed on Amazon
	// Web Services provided clients when a VPN session is established. Valid values:
	// true | false Default value: false
	Enabled *bool
	// contains filtered or unexported fields
}

type ClientLoginBannerResponseOptions struct {

	// Customizable text that will be displayed in a banner on Amazon Web Services
	// provided clients when a VPN session is established. UTF-8 encoded characters
	// only. Maximum of 1400 characters.
	BannerText *string

	// Current state of text banner feature. Valid values: true | false
	Enabled *bool
	// contains filtered or unexported fields
}

type ClientVpnAuthentication struct {

	// Information about the Active Directory, if applicable.
	ActiveDirectory *DirectoryServiceAuthentication

	// Information about the IAM SAML identity provider, if applicable.
	FederatedAuthentication *FederatedAuthentication

	// Information about the authentication certificates, if applicable.
	MutualAuthentication *CertificateAuthentication

	// The authentication type used.
	Type ClientVpnAuthenticationType
	// contains filtered or unexported fields
}

type ClientVpnAuthenticationRequest struct {

	// Information about the Active Directory to be used, if applicable. You must
	// provide this information if Type is directory-service-authentication .
	ActiveDirectory *DirectoryServiceAuthenticationRequest

	// Information about the IAM SAML identity provider to be used, if applicable. You
	// must provide this information if Type is federated-authentication .
	FederatedAuthentication *FederatedAuthenticationRequest

	// Information about the authentication certificates to be used, if applicable.
	// You must provide this information if Type is certificate-authentication .
	MutualAuthentication *CertificateAuthenticationRequest

	// The type of client authentication to be used.
	Type ClientVpnAuthenticationType
	// contains filtered or unexported fields
}

type ClientVpnAuthenticationType string

type ClientVpnAuthorizationRuleStatus struct {

	// The state of the authorization rule.
	Code ClientVpnAuthorizationRuleStatusCode

	// A message about the status of the authorization rule, if applicable.
	Message *string
	// contains filtered or unexported fields
}

type ClientVpnAuthorizationRuleStatusCode string

type ClientVpnConnection struct {

	// The IP address of the client.
	ClientIp *string

	// The ID of the Client VPN endpoint to which the client is connected.
	ClientVpnEndpointId *string

	// The common name associated with the client. This is either the name of the
	// client certificate, or the Active Directory user name.
	CommonName *string

	// The date and time the client connection was terminated.
	ConnectionEndTime *string

	// The date and time the client connection was established.
	ConnectionEstablishedTime *string

	// The ID of the client connection.
	ConnectionId *string

	// The number of bytes received by the client.
	EgressBytes *string

	// The number of packets received by the client.
	EgressPackets *string

	// The number of bytes sent by the client.
	IngressBytes *string

	// The number of packets sent by the client.
	IngressPackets *string

	// The statuses returned by the client connect handler for posture compliance, if
	// applicable.
	PostureComplianceStatuses []string

	// The current state of the client connection.
	Status *ClientVpnConnectionStatus

	// The current date and time.
	Timestamp *string

	// The username of the client who established the client connection. This
	// information is only provided if Active Directory client authentication is used.
	Username *string
	// contains filtered or unexported fields
}

type ClientVpnConnectionStatus struct {

	// The state of the client connection.
	Code ClientVpnConnectionStatusCode

	// A message about the status of the client connection, if applicable.
	Message *string
	// contains filtered or unexported fields
}

type ClientVpnConnectionStatusCode string

type ClientVpnEndpoint struct {

	// Information about the associated target networks. A target network is a subnet
	// in a VPC.
	//
	// Deprecated: This property is deprecated. To view the target networks associated
	// with a Client VPN endpoint, call DescribeClientVpnTargetNetworks and inspect the
	// clientVpnTargetNetworks response element.
	AssociatedTargetNetworks []AssociatedTargetNetwork

	// Information about the authentication method used by the Client VPN endpoint.
	AuthenticationOptions []ClientVpnAuthentication

	// The IPv4 address range, in CIDR notation, from which client IP addresses are
	// assigned.
	ClientCidrBlock *string

	// The options for managing connection authorization for new client connections.
	ClientConnectOptions *ClientConnectResponseOptions

	// Options for enabling a customizable text banner that will be displayed on
	// Amazon Web Services provided clients when a VPN session is established.
	ClientLoginBannerOptions *ClientLoginBannerResponseOptions

	// The ID of the Client VPN endpoint.
	ClientVpnEndpointId *string

	// Information about the client connection logging options for the Client VPN
	// endpoint.
	ConnectionLogOptions *ConnectionLogResponseOptions

	// The date and time the Client VPN endpoint was created.
	CreationTime *string

	// The date and time the Client VPN endpoint was deleted, if applicable.
	DeletionTime *string

	// A brief description of the endpoint.
	Description *string

	// The DNS name to be used by clients when connecting to the Client VPN endpoint.
	DnsName *string

	// Information about the DNS servers to be used for DNS resolution.
	DnsServers []string

	// The IDs of the security groups for the target network.
	SecurityGroupIds []string

	// The URL of the self-service portal.
	SelfServicePortalUrl *string

	// The ARN of the server certificate.
	ServerCertificateArn *string

	// The maximum VPN session duration time in hours. Valid values: 8 | 10 | 12 | 24
	// Default value: 24
	SessionTimeoutHours *int32

	// Indicates whether split-tunnel is enabled in the Client VPN endpoint. For
	// information about split-tunnel VPN endpoints, see Split-Tunnel Client VPN
	// endpoint (https://docs.aws.amazon.com/vpn/latest/clientvpn-admin/split-tunnel-vpn.html)
	// in the Client VPN Administrator Guide.
	SplitTunnel *bool

	// The current state of the Client VPN endpoint.
	Status *ClientVpnEndpointStatus

	// Any tags assigned to the Client VPN endpoint.
	Tags []Tag

	// The transport protocol used by the Client VPN endpoint.
	TransportProtocol TransportProtocol

	// The ID of the VPC.
	VpcId *string

	// The port number for the Client VPN endpoint.
	VpnPort *int32

	// The protocol used by the VPN session.
	VpnProtocol VpnProtocol
	// contains filtered or unexported fields
}

type ClientVpnEndpointAttributeStatus struct {

	// The status code.
	Code ClientVpnEndpointAttributeStatusCode

	// The status message.
	Message *string
	// contains filtered or unexported fields
}

type ClientVpnEndpointAttributeStatusCode string

type ClientVpnEndpointStatus struct {

	// The state of the Client VPN endpoint. Possible states include:
	//   - pending-associate - The Client VPN endpoint has been created but no target
	//   networks have been associated. The Client VPN endpoint cannot accept
	//   connections.
	//   - available - The Client VPN endpoint has been created and a target network
	//   has been associated. The Client VPN endpoint can accept connections.
	//   - deleting - The Client VPN endpoint is being deleted. The Client VPN endpoint
	//   cannot accept connections.
	//   - deleted - The Client VPN endpoint has been deleted. The Client VPN endpoint
	//   cannot accept connections.
	Code ClientVpnEndpointStatusCode

	// A message about the status of the Client VPN endpoint.
	Message *string
	// contains filtered or unexported fields
}

type ClientVpnEndpointStatusCode string

type ClientVpnRoute struct {

	// The ID of the Client VPN endpoint with which the route is associated.
	ClientVpnEndpointId *string

	// A brief description of the route.
	Description *string

	// The IPv4 address range, in CIDR notation, of the route destination.
	DestinationCidr *string

	// Indicates how the route was associated with the Client VPN endpoint. associate
	// indicates that the route was automatically added when the target network was
	// associated with the Client VPN endpoint. add-route indicates that the route was
	// manually added using the CreateClientVpnRoute action.
	Origin *string

	// The current state of the route.
	Status *ClientVpnRouteStatus

	// The ID of the subnet through which traffic is routed.
	TargetSubnet *string

	// The route type.
	Type *string
	// contains filtered or unexported fields
}

type ClientVpnRouteStatus struct {

	// The state of the Client VPN endpoint route.
	Code ClientVpnRouteStatusCode

	// A message about the status of the Client VPN endpoint route, if applicable.
	Message *string
	// contains filtered or unexported fields
}

type ClientVpnRouteStatusCode string

type CloudWatchLogOptions struct {

	// Status of VPN tunnel logging feature. Default value is False . Valid values:
	// True | False
	LogEnabled *bool

	// The Amazon Resource Name (ARN) of the CloudWatch log group to send logs to.
	LogGroupArn *string

	// Configured log format. Default format is json . Valid values: json | text
	LogOutputFormat *string
	// contains filtered or unexported fields
}

type CloudWatchLogOptionsSpecification struct {

	// Enable or disable VPN tunnel logging feature. Default value is False . Valid
	// values: True | False
	LogEnabled *bool

	// The Amazon Resource Name (ARN) of the CloudWatch log group to send logs to.
	LogGroupArn *string

	// Set log format. Default format is json . Valid values: json | text
	LogOutputFormat *string
	// contains filtered or unexported fields
}

type CoipAddressUsage struct {

	// The allocation ID of the address.
	AllocationId *string

	// The Amazon Web Services account ID.
	AwsAccountId *string

	// The Amazon Web Services service.
	AwsService *string

	// The customer-owned IP address.
	CoIp *string
	// contains filtered or unexported fields
}

type CoipCidr struct {

	// An address range in a customer-owned IP address space.
	Cidr *string

	// The ID of the address pool.
	CoipPoolId *string

	// The ID of the local gateway route table.
	LocalGatewayRouteTableId *string
	// contains filtered or unexported fields
}

type CoipPool struct {

	// The ID of the local gateway route table.
	LocalGatewayRouteTableId *string

	// The ARN of the address pool.
	PoolArn *string

	// The address ranges of the address pool.
	PoolCidrs []string

	// The ID of the address pool.
	PoolId *string

	// The tags.
	Tags []Tag
	// contains filtered or unexported fields
}

type ConnectionLogOptions struct {

	// The name of the CloudWatch Logs log group. Required if connection logging is
	// enabled.
	CloudwatchLogGroup *string

	// The name of the CloudWatch Logs log stream to which the connection data is
	// published.
	CloudwatchLogStream *string

	// Indicates whether connection logging is enabled.
	Enabled *bool
	// contains filtered or unexported fields
}

type ConnectionLogResponseOptions struct {

	// The name of the Amazon CloudWatch Logs log group to which connection logging
	// data is published.
	CloudwatchLogGroup *string

	// The name of the Amazon CloudWatch Logs log stream to which connection logging
	// data is published.
	CloudwatchLogStream *string

	// Indicates whether client connection logging is enabled for the Client VPN
	// endpoint.
	Enabled *bool
	// contains filtered or unexported fields
}

type ConnectionNotification struct {

	// The events for the notification. Valid values are Accept , Connect , Delete ,
	// and Reject .
	ConnectionEvents []string

	// The ARN of the SNS topic for the notification.
	ConnectionNotificationArn *string

	// The ID of the notification.
	ConnectionNotificationId *string

	// The state of the notification.
	ConnectionNotificationState ConnectionNotificationState

	// The type of notification.
	ConnectionNotificationType ConnectionNotificationType

	// The ID of the endpoint service.
	ServiceId *string

	// The ID of the VPC endpoint.
	VpcEndpointId *string
	// contains filtered or unexported fields
}

type ConnectionNotificationState string

type ConnectionNotificationType string

type ConnectionTrackingConfiguration struct {

	// Timeout (in seconds) for idle TCP connections in an established state. Min: 60
	// seconds. Max: 432000 seconds (5 days). Default: 432000 seconds. Recommended:
	// Less than 432000 seconds.
	TcpEstablishedTimeout *int32

	// Timeout (in seconds) for idle UDP flows classified as streams which have seen
	// more than one request-response transaction. Min: 60 seconds. Max: 180 seconds (3
	// minutes). Default: 180 seconds.
	UdpStreamTimeout *int32

	// Timeout (in seconds) for idle UDP flows that have seen traffic only in a single
	// direction or a single request-response transaction. Min: 30 seconds. Max: 60
	// seconds. Default: 30 seconds.
	UdpTimeout *int32
	// contains filtered or unexported fields
}

type ConnectionTrackingSpecification struct {

	// Timeout (in seconds) for idle TCP connections in an established state. Min: 60
	// seconds. Max: 432000 seconds (5 days). Default: 432000 seconds. Recommended:
	// Less than 432000 seconds.
	TcpEstablishedTimeout *int32

	// Timeout (in seconds) for idle UDP flows classified as streams which have seen
	// more than one request-response transaction. Min: 60 seconds. Max: 180 seconds (3
	// minutes). Default: 180 seconds.
	UdpStreamTimeout *int32

	// Timeout (in seconds) for idle UDP flows that have seen traffic only in a single
	// direction or a single request-response transaction. Min: 30 seconds. Max: 60
	// seconds. Default: 30 seconds.
	UdpTimeout *int32
	// contains filtered or unexported fields
}

type ConnectionTrackingSpecificationRequest struct {

	// Timeout (in seconds) for idle TCP connections in an established state. Min: 60
	// seconds. Max: 432000 seconds (5 days). Default: 432000 seconds. Recommended:
	// Less than 432000 seconds.
	TcpEstablishedTimeout *int32

	// Timeout (in seconds) for idle UDP flows classified as streams which have seen
	// more than one request-response transaction. Min: 60 seconds. Max: 180 seconds (3
	// minutes). Default: 180 seconds.
	UdpStreamTimeout *int32

	// Timeout (in seconds) for idle UDP flows that have seen traffic only in a single
	// direction or a single request-response transaction. Min: 30 seconds. Max: 60
	// seconds. Default: 30 seconds.
	UdpTimeout *int32
	// contains filtered or unexported fields
}