types

type EncryptionStatus string

type ErrorCause string

type ExportStatus string

type InvalidParameterException struct {
	Message *string

	ErrorCodeOverride *string

	ParameterName *string
	// contains filtered or unexported fields
}

type JournalKinesisStreamDescription struct {

	// The configuration settings of the Amazon Kinesis Data Streams destination for a
	// QLDB journal stream.
	//
	// This member is required.
	KinesisConfiguration *KinesisConfiguration

	// The name of the ledger.
	//
	// This member is required.
	LedgerName *string

	// The Amazon Resource Name (ARN) of the IAM role that grants QLDB permissions for
	// a journal stream to write data records to a Kinesis Data Streams resource.
	//
	// This member is required.
	RoleArn *string

	// The current state of the QLDB journal stream.
	//
	// This member is required.
	Status StreamStatus

	// The UUID (represented in Base62-encoded text) of the QLDB journal stream.
	//
	// This member is required.
	StreamId *string

	// The user-defined name of the QLDB journal stream.
	//
	// This member is required.
	StreamName *string

	// The Amazon Resource Name (ARN) of the QLDB journal stream.
	Arn *string

	// The date and time, in epoch time format, when the QLDB journal stream was
	// created. (Epoch time format is the number of seconds elapsed since 12:00:00 AM
	// January 1, 1970 UTC.)
	CreationTime *time.Time

	// The error message that describes the reason that a stream has a status of
	// IMPAIRED or FAILED . This is not applicable to streams that have other status
	// values.
	ErrorCause ErrorCause

	// The exclusive date and time that specifies when the stream ends. If this
	// parameter is undefined, the stream runs indefinitely until you cancel it.
	ExclusiveEndTime *time.Time

	// The inclusive start date and time from which to start streaming journal data.
	InclusiveStartTime *time.Time
	// contains filtered or unexported fields
}

type JournalS3ExportDescription struct {

	// The exclusive end date and time for the range of journal contents that was
	// specified in the original export request.
	//
	// This member is required.
	ExclusiveEndTime *time.Time

	// The date and time, in epoch time format, when the export job was created.
	// (Epoch time format is the number of seconds elapsed since 12:00:00 AM January 1,
	// 1970 UTC.)
	//
	// This member is required.
	ExportCreationTime *time.Time

	// The UUID (represented in Base62-encoded text) of the journal export job.
	//
	// This member is required.
	ExportId *string

	// The inclusive start date and time for the range of journal contents that was
	// specified in the original export request.
	//
	// This member is required.
	InclusiveStartTime *time.Time

	// The name of the ledger.
	//
	// This member is required.
	LedgerName *string

	// The Amazon Resource Name (ARN) of the IAM role that grants QLDB permissions for
	// a journal export job to do the following:
	//   - Write objects into your Amazon Simple Storage Service (Amazon S3) bucket.
	//   - (Optional) Use your customer managed key in Key Management Service (KMS)
	//   for server-side encryption of your exported data.
	//
	// This member is required.
	RoleArn *string

	// The Amazon Simple Storage Service (Amazon S3) bucket location in which a
	// journal export job writes the journal contents.
	//
	// This member is required.
	S3ExportConfiguration *S3ExportConfiguration

	// The current state of the journal export job.
	//
	// This member is required.
	Status ExportStatus

	// The output format of the exported journal data.
	OutputFormat OutputFormat
	// contains filtered or unexported fields
}

type KinesisConfiguration struct {

	// The Amazon Resource Name (ARN) of the Kinesis Data Streams resource.
	//
	// This member is required.
	StreamArn *string

	// Enables QLDB to publish multiple data records in a single Kinesis Data Streams
	// record, increasing the number of records sent per API call. Default: True
	// Record aggregation has important implications for processing records and
	// requires de-aggregation in your stream consumer. To learn more, see KPL Key
	// Concepts (https://docs.aws.amazon.com/streams/latest/dev/kinesis-kpl-concepts.html)
	// and Consumer De-aggregation (https://docs.aws.amazon.com/streams/latest/dev/kinesis-kpl-consumer-deaggregation.html)
	// in the Amazon Kinesis Data Streams Developer Guide.
	AggregationEnabled *bool
	// contains filtered or unexported fields
}

type LedgerEncryptionDescription struct {

	// The current state of encryption at rest for the ledger. This can be one of the
	// following values:
	//   - ENABLED : Encryption is fully enabled using the specified key.
	//   - UPDATING : The ledger is actively processing the specified key change. Key
	//   changes in QLDB are asynchronous. The ledger is fully accessible without any
	//   performance impact while the key change is being processed. The amount of time
	//   it takes to update a key varies depending on the ledger size.
	//   - KMS_KEY_INACCESSIBLE : The specified customer managed KMS key is not
	//   accessible, and the ledger is impaired. Either the key was disabled or deleted,
	//   or the grants on the key were revoked. When a ledger is impaired, it is not
	//   accessible and does not accept any read or write requests. An impaired ledger
	//   automatically returns to an active state after you restore the grants on the
	//   key, or re-enable the key that was disabled. However, deleting a customer
	//   managed KMS key is irreversible. After a key is deleted, you can no longer
	//   access the ledgers that are protected with that key, and the data becomes
	//   unrecoverable permanently.
	//
	// This member is required.
	EncryptionStatus EncryptionStatus

	// The Amazon Resource Name (ARN) of the customer managed KMS key that the ledger
	// uses for encryption at rest. If this parameter is undefined, the ledger uses an
	// Amazon Web Services owned KMS key for encryption. It will display
	// AWS_OWNED_KMS_KEY when updating the ledger's encryption configuration to the
	// Amazon Web Services owned KMS key.
	//
	// This member is required.
	KmsKeyArn *string

	// The date and time, in epoch time format, when the KMS key first became
	// inaccessible, in the case of an error. (Epoch time format is the number of
	// seconds that have elapsed since 12:00:00 AM January 1, 1970 UTC.) This parameter
	// is undefined if the KMS key is accessible.
	InaccessibleKmsKeyDateTime *time.Time
	// contains filtered or unexported fields
}

type LedgerState string

type LedgerSummary struct {

	// The date and time, in epoch time format, when the ledger was created. (Epoch
	// time format is the number of seconds elapsed since 12:00:00 AM January 1, 1970
	// UTC.)
	CreationDateTime *time.Time

	// The name of the ledger.
	Name *string

	// The current status of the ledger.
	State LedgerState
	// contains filtered or unexported fields
}

type LimitExceededException struct {
	Message *string

	ErrorCodeOverride *string

	ResourceType *string
	// contains filtered or unexported fields
}

type OutputFormat string

type PermissionsMode string

type ResourceAlreadyExistsException struct {
	Message *string

	ErrorCodeOverride *string

	ResourceType *string
	ResourceName *string
	// contains filtered or unexported fields
}

type ResourceInUseException struct {
	Message *string

	ErrorCodeOverride *string

	ResourceType *string
	ResourceName *string
	// contains filtered or unexported fields
}

type ResourceNotFoundException struct {
	Message *string

	ErrorCodeOverride *string

	ResourceType *string
	ResourceName *string
	// contains filtered or unexported fields
}

type ResourcePreconditionNotMetException struct {
	Message *string

	ErrorCodeOverride *string

	ResourceType *string
	ResourceName *string
	// contains filtered or unexported fields
}

type S3EncryptionConfiguration struct {

	// The Amazon S3 object encryption type. To learn more about server-side
	// encryption options in Amazon S3, see Protecting Data Using Server-Side
	// Encryption (https://docs.aws.amazon.com/AmazonS3/latest/dev/serv-side-encryption.html)
	// in the Amazon S3 Developer Guide.
	//
	// This member is required.
	ObjectEncryptionType S3ObjectEncryptionType

	// The Amazon Resource Name (ARN) of a symmetric encryption key in Key Management
	// Service (KMS). Amazon S3 does not support asymmetric KMS keys. You must provide
	// a KmsKeyArn if you specify SSE_KMS as the ObjectEncryptionType . KmsKeyArn is
	// not required if you specify SSE_S3 as the ObjectEncryptionType .
	KmsKeyArn *string
	// contains filtered or unexported fields
}

type S3ExportConfiguration struct {

	// The Amazon S3 bucket name in which a journal export job writes the journal
	// contents. The bucket name must comply with the Amazon S3 bucket naming
	// conventions. For more information, see Bucket Restrictions and Limitations (https://docs.aws.amazon.com/AmazonS3/latest/dev/BucketRestrictions.html)
	// in the Amazon S3 Developer Guide.
	//
	// This member is required.
	Bucket *string

	// The encryption settings that are used by a journal export job to write data in
	// an Amazon S3 bucket.
	//
	// This member is required.
	EncryptionConfiguration *S3EncryptionConfiguration

	// The prefix for the Amazon S3 bucket in which a journal export job writes the
	// journal contents. The prefix must comply with Amazon S3 key naming rules and
	// restrictions. For more information, see Object Key and Metadata (https://docs.aws.amazon.com/AmazonS3/latest/dev/UsingMetadata.html)
	// in the Amazon S3 Developer Guide. The following are examples of valid Prefix
	// values:
	//   - JournalExports-ForMyLedger/Testing/
	//   - JournalExports
	//   - My:Tests/
	//
	// This member is required.
	Prefix *string
	// contains filtered or unexported fields
}

type S3ObjectEncryptionType string

type StreamStatus string

type ValueHolder struct {

	// An Amazon Ion plaintext value contained in a ValueHolder structure.
	IonText *string
	// contains filtered or unexported fields
}