types

type AccountDetails struct {

	// Additional email addresses where updates are sent about your account review
	// process.
	AdditionalContactEmailAddresses []string

	// The language you would prefer for the case. The contact language can be one of
	// ENGLISH or JAPANESE .
	ContactLanguage ContactLanguage

	// The type of email your account is sending. The mail type can be one of the
	// following:
	//   - MARKETING – Most of your sending traffic is to keep your customers informed
	//   of your latest offering.
	//   - TRANSACTIONAL – Most of your sending traffic is to communicate during a
	//   transaction with a customer.
	MailType MailType

	// Information about the review of the latest details you submitted.
	ReviewDetails *ReviewDetails

	// A description of the types of email that you plan to send.
	UseCaseDescription *string

	// The URL of your website. This information helps us better understand the type
	// of content that you plan to send.
	WebsiteURL *string
	// contains filtered or unexported fields
}

type AccountSuspendedException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type AlreadyExistsException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type BadRequestException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type BatchGetMetricDataQuery struct {

	// Represents the end date for the query interval.
	//
	// This member is required.
	EndDate *time.Time

	// The query identifier.
	//
	// This member is required.
	Id *string

	// The queried metric. This can be one of the following:
	//   - SEND – Emails sent eligible for tracking in the VDM dashboard. This excludes
	//   emails sent to the mailbox simulator and emails addressed to more than one
	//   recipient.
	//   - COMPLAINT – Complaints received for your account. This excludes complaints
	//   from the mailbox simulator, those originating from your account-level
	//   suppression list (if enabled), and those for emails addressed to more than one
	//   recipient
	//   - PERMANENT_BOUNCE – Permanent bounces - i.e. feedback received for emails
	//   sent to non-existent mailboxes. Excludes bounces from the mailbox simulator,
	//   those originating from your account-level suppression list (if enabled), and
	//   those for emails addressed to more than one recipient.
	//   - TRANSIENT_BOUNCE – Transient bounces - i.e. feedback received for delivery
	//   failures excluding issues with non-existent mailboxes. Excludes bounces from the
	//   mailbox simulator, and those for emails addressed to more than one recipient.
	//   - OPEN – Unique open events for emails including open trackers. Excludes opens
	//   for emails addressed to more than one recipient.
	//   - CLICK – Unique click events for emails including wrapped links. Excludes
	//   clicks for emails addressed to more than one recipient.
	//   - DELIVERY – Successful deliveries for email sending attempts. Excludes
	//   deliveries to the mailbox simulator and for emails addressed to more than one
	//   recipient.
	//   - DELIVERY_OPEN – Successful deliveries for email sending attempts. Excludes
	//   deliveries to the mailbox simulator, for emails addressed to more than one
	//   recipient, and emails without open trackers.
	//   - DELIVERY_CLICK – Successful deliveries for email sending attempts. Excludes
	//   deliveries to the mailbox simulator, for emails addressed to more than one
	//   recipient, and emails without click trackers.
	//   - DELIVERY_COMPLAINT – Successful deliveries for email sending attempts.
	//   Excludes deliveries to the mailbox simulator, for emails addressed to more than
	//   one recipient, and emails addressed to recipients hosted by ISPs with which
	//   Amazon SES does not have a feedback loop agreement.
	//
	// This member is required.
	Metric Metric

	// The query namespace - e.g. VDM
	//
	// This member is required.
	Namespace MetricNamespace

	// Represents the start date for the query interval.
	//
	// This member is required.
	StartDate *time.Time

	// An object that contains mapping between MetricDimensionName and
	// MetricDimensionValue to filter metrics by.
	Dimensions map[string]string
	// contains filtered or unexported fields
}

type BehaviorOnMxFailure string

type BlacklistEntry struct {

	// Additional information about the blacklisting event, as provided by the
	// blacklist maintainer.
	Description *string

	// The time when the blacklisting event occurred.
	ListingTime *time.Time

	// The name of the blacklist that the IP address appears on.
	RblName *string
	// contains filtered or unexported fields
}

type Body struct {

	// An object that represents the version of the message that is displayed in email
	// clients that support HTML. HTML messages can include formatted text, hyperlinks,
	// images, and more.
	Html *Content

	// An object that represents the version of the message that is displayed in email
	// clients that don't support HTML, or clients where the recipient has disabled
	// HTML rendering.
	Text *Content
	// contains filtered or unexported fields
}

type Bounce struct {

	// The subtype of the bounce, as determined by SES.
	BounceSubType *string

	// The type of the bounce, as determined by SES. Can be one of UNDETERMINED ,
	// TRANSIENT , or PERMANENT
	BounceType BounceType

	// The status code issued by the reporting Message Transfer Authority (MTA). This
	// field only appears if a delivery status notification (DSN) was attached to the
	// bounce and the Diagnostic-Code was provided in the DSN.
	DiagnosticCode *string
	// contains filtered or unexported fields
}

type BounceType string

type BulkEmailContent struct {

	// The template to use for the bulk email message.
	Template *Template
	// contains filtered or unexported fields
}

type BulkEmailEntry struct {

	// Represents the destination of the message, consisting of To:, CC:, and BCC:
	// fields. Amazon SES does not support the SMTPUTF8 extension, as described in
	// RFC6531 (https://tools.ietf.org/html/rfc6531) . For this reason, the local part
	// of a destination email address (the part of the email address that precedes the
	// @ sign) may only contain 7-bit ASCII characters (https://en.wikipedia.org/wiki/Email_address#Local-part)
	// . If the domain part of an address (the part after the @ sign) contains
	// non-ASCII characters, they must be encoded using Punycode, as described in
	// RFC3492 (https://tools.ietf.org/html/rfc3492.html) .
	//
	// This member is required.
	Destination *Destination

	// The ReplacementEmailContent associated with a BulkEmailEntry .
	ReplacementEmailContent *ReplacementEmailContent

	// A list of tags, in the form of name/value pairs, to apply to an email that you
	// send using the SendBulkTemplatedEmail operation. Tags correspond to
	// characteristics of the email that you define, so that you can publish email
	// sending events.
	ReplacementTags []MessageTag
	// contains filtered or unexported fields
}

type BulkEmailEntryResult struct {

	// A description of an error that prevented a message being sent using the
	// SendBulkTemplatedEmail operation.
	Error *string

	// The unique message identifier returned from the SendBulkTemplatedEmail
	// operation.
	MessageId *string

	// The status of a message sent using the SendBulkTemplatedEmail operation.
	// Possible values for this parameter include:
	//   - SUCCESS: Amazon SES accepted the message, and will attempt to deliver it to
	//   the recipients.
	//   - MESSAGE_REJECTED: The message was rejected because it contained a virus.
	//   - MAIL_FROM_DOMAIN_NOT_VERIFIED: The sender's email address or domain was not
	//   verified.
	//   - CONFIGURATION_SET_DOES_NOT_EXIST: The configuration set you specified does
	//   not exist.
	//   - TEMPLATE_DOES_NOT_EXIST: The template you specified does not exist.
	//   - ACCOUNT_SUSPENDED: Your account has been shut down because of issues
	//   related to your email sending practices.
	//   - ACCOUNT_THROTTLED: The number of emails you can send has been reduced
	//   because your account has exceeded its allocated sending limit.
	//   - ACCOUNT_DAILY_QUOTA_EXCEEDED: You have reached or exceeded the maximum
	//   number of emails you can send from your account in a 24-hour period.
	//   - INVALID_SENDING_POOL_NAME: The configuration set you specified refers to an
	//   IP pool that does not exist.
	//   - ACCOUNT_SENDING_PAUSED: Email sending for the Amazon SES account was
	//   disabled using the UpdateAccountSendingEnabled (https://docs.aws.amazon.com/ses/latest/APIReference/API_UpdateAccountSendingEnabled.html)
	//   operation.
	//   - CONFIGURATION_SET_SENDING_PAUSED: Email sending for this configuration set
	//   was disabled using the UpdateConfigurationSetSendingEnabled (https://docs.aws.amazon.com/ses/latest/APIReference/API_UpdateConfigurationSetSendingEnabled.html)
	//   operation.
	//   - INVALID_PARAMETER_VALUE: One or more of the parameters you specified when
	//   calling this operation was invalid. See the error message for additional
	//   information.
	//   - TRANSIENT_FAILURE: Amazon SES was unable to process your request because of
	//   a temporary issue.
	//   - FAILED: Amazon SES was unable to process your request. See the error
	//   message for additional information.
	Status BulkEmailStatus
	// contains filtered or unexported fields
}

type BulkEmailStatus string

type CloudWatchDestination struct {

	// An array of objects that define the dimensions to use when you send email
	// events to Amazon CloudWatch.
	//
	// This member is required.
	DimensionConfigurations []CloudWatchDimensionConfiguration
	// contains filtered or unexported fields
}

type CloudWatchDimensionConfiguration struct {

	// The default value of the dimension that is published to Amazon CloudWatch if
	// you don't provide the value of the dimension when you send an email. This value
	// has to meet the following criteria:
	//   - Can only contain ASCII letters (a–z, A–Z), numbers (0–9), underscores (_),
	//   or dashes (-), at signs (@), and periods (.).
	//   - It can contain no more than 256 characters.
	//
	// This member is required.
	DefaultDimensionValue *string

	// The name of an Amazon CloudWatch dimension associated with an email sending
	// metric. The name has to meet the following criteria:
	//   - It can only contain ASCII letters (a–z, A–Z), numbers (0–9), underscores
	//   (_), or dashes (-).
	//   - It can contain no more than 256 characters.
	//
	// This member is required.
	DimensionName *string

	// The location where the Amazon SES API v2 finds the value of a dimension to
	// publish to Amazon CloudWatch. To use the message tags that you specify using an
	// X-SES-MESSAGE-TAGS header or a parameter to the SendEmail or SendRawEmail API,
	// choose messageTag . To use your own email headers, choose emailHeader . To use
	// link tags, choose linkTags .
	//
	// This member is required.
	DimensionValueSource DimensionValueSource
	// contains filtered or unexported fields
}

type Complaint struct {

	// The value of the Feedback-Type field from the feedback report received from the
	// ISP.
	ComplaintFeedbackType *string

	// Can either be null or OnAccountSuppressionList . If the value is
	// OnAccountSuppressionList , SES accepted the message, but didn't attempt to send
	// it because it was on the account-level suppression list.
	ComplaintSubType *string
	// contains filtered or unexported fields
}

type ConcurrentModificationException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type ConflictException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type Contact struct {

	// The contact's email address.
	EmailAddress *string

	// A timestamp noting the last time the contact's information was updated.
	LastUpdatedTimestamp *time.Time

	// The default topic preferences applied to the contact.
	TopicDefaultPreferences []TopicPreference

	// The contact's preference for being opted-in to or opted-out of a topic.
	TopicPreferences []TopicPreference

	// A boolean value status noting if the contact is unsubscribed from all contact
	// list topics.
	UnsubscribeAll bool
	// contains filtered or unexported fields
}

type ContactLanguage string

type ContactList struct {

	// The name of the contact list.
	ContactListName *string

	// A timestamp noting the last time the contact list was updated.
	LastUpdatedTimestamp *time.Time
	// contains filtered or unexported fields
}

type ContactListDestination struct {

	// >The type of action to perform on the addresses. The following are the possible
	// values:
	//   - PUT: add the addresses to the contact list. If the record already exists,
	//   it will override it with the new value.
	//   - DELETE: remove the addresses from the contact list.
	//
	// This member is required.
	ContactListImportAction ContactListImportAction

	// The name of the contact list.
	//
	// This member is required.
	ContactListName *string
	// contains filtered or unexported fields
}

type ContactListImportAction string

type Content struct {

	// The content of the message itself.
	//
	// This member is required.
	Data *string

	// The character set for the content. Because of the constraints of the SMTP
	// protocol, Amazon SES uses 7-bit ASCII by default. If the text includes
	// characters outside of the ASCII range, you have to specify a character set. For
	// example, you could specify UTF-8 , ISO-8859-1 , or Shift_JIS .
	Charset *string
	// contains filtered or unexported fields
}

type CustomVerificationEmailTemplateMetadata struct {

	// The URL that the recipient of the verification email is sent to if his or her
	// address is not successfully verified.
	FailureRedirectionURL *string

	// The email address that the custom verification email is sent from.
	FromEmailAddress *string

	// The URL that the recipient of the verification email is sent to if his or her
	// address is successfully verified.
	SuccessRedirectionURL *string

	// The name of the custom verification email template.
	TemplateName *string

	// The subject line of the custom verification email.
	TemplateSubject *string
	// contains filtered or unexported fields
}

type DailyVolume struct {

	// An object that contains inbox placement metrics for a specified day in the
	// analysis period, broken out by the recipient's email provider.
	DomainIspPlacements []DomainIspPlacement

	// The date that the DailyVolume metrics apply to, in Unix time.
	StartDate *time.Time

	// An object that contains inbox placement metrics for a specific day in the
	// analysis period.
	VolumeStatistics *VolumeStatistics
	// contains filtered or unexported fields
}

type DashboardAttributes struct {

	// Specifies the status of your VDM engagement metrics collection. Can be one of
	// the following:
	//   - ENABLED – Amazon SES enables engagement metrics for your account.
	//   - DISABLED – Amazon SES disables engagement metrics for your account.
	EngagementMetrics FeatureStatus
	// contains filtered or unexported fields
}

type DashboardOptions struct {

	// Specifies the status of your VDM engagement metrics collection. Can be one of
	// the following:
	//   - ENABLED – Amazon SES enables engagement metrics for the configuration set.
	//   - DISABLED – Amazon SES disables engagement metrics for the configuration set.
	EngagementMetrics FeatureStatus
	// contains filtered or unexported fields
}

type DataFormat string

type DedicatedIp struct {

	// An IPv4 address.
	//
	// This member is required.
	Ip *string

	// Indicates how complete the dedicated IP warm-up process is. When this value
	// equals 1, the address has completed the warm-up process and is ready for use.
	//
	// This member is required.
	WarmupPercentage *int32

	// The warm-up status of a dedicated IP address. The status can have one of the
	// following values:
	//   - IN_PROGRESS – The IP address isn't ready to use because the dedicated IP
	//   warm-up process is ongoing.
	//   - DONE – The dedicated IP warm-up process is complete, and the IP address is
	//   ready to use.
	//
	// This member is required.
	WarmupStatus WarmupStatus

	// The name of the dedicated IP pool that the IP address is associated with.
	PoolName *string
	// contains filtered or unexported fields
}

type DedicatedIpPool struct {

	// The name of the dedicated IP pool.
	//
	// This member is required.
	PoolName *string

	// The type of the dedicated IP pool.
	//   - STANDARD – A dedicated IP pool where you can control which IPs are part of
	//   the pool.
	//   - MANAGED – A dedicated IP pool where the reputation and number of IPs are
	//   automatically managed by Amazon SES.
	//
	// This member is required.
	ScalingMode ScalingMode
	// contains filtered or unexported fields
}

type DeliverabilityDashboardAccountStatus string

type DeliverabilityTestReport struct {

	// The date and time when the predictive inbox placement test was created.
	CreateDate *time.Time

	// The status of the predictive inbox placement test. If the status is IN_PROGRESS
	// , then the predictive inbox placement test is currently running. Predictive
	// inbox placement tests are usually complete within 24 hours of creating the test.
	// If the status is COMPLETE , then the test is finished, and you can use the
	// GetDeliverabilityTestReport to view the results of the test.
	DeliverabilityTestStatus DeliverabilityTestStatus

	// The sender address that you specified for the predictive inbox placement test.
	FromEmailAddress *string

	// A unique string that identifies the predictive inbox placement test.
	ReportId *string

	// A name that helps you identify a predictive inbox placement test report.
	ReportName *string

	// The subject line for an email that you submitted in a predictive inbox
	// placement test.
	Subject *string
	// contains filtered or unexported fields
}

type DeliverabilityTestStatus string

type DeliveryEventType string

type DeliveryOptions struct {

	// The name of the dedicated IP pool to associate with the configuration set.
	SendingPoolName *string

	// Specifies whether messages that use the configuration set are required to use
	// Transport Layer Security (TLS). If the value is Require , messages are only
	// delivered if a TLS connection can be established. If the value is Optional ,
	// messages can be delivered in plain text if a TLS connection can't be
	// established.
	TlsPolicy TlsPolicy
	// contains filtered or unexported fields
}

type Destination struct {

	// An array that contains the email addresses of the "BCC" (blind carbon copy)
	// recipients for the email.
	BccAddresses []string

	// An array that contains the email addresses of the "CC" (carbon copy) recipients
	// for the email.
	CcAddresses []string

	// An array that contains the email addresses of the "To" recipients for the email.
	ToAddresses []string
	// contains filtered or unexported fields
}

type DimensionValueSource string

type DkimAttributes struct {

	// [Easy DKIM] The key length of the DKIM key pair in use.
	CurrentSigningKeyLength DkimSigningKeyLength

	// [Easy DKIM] The last time a key pair was generated for this identity.
	LastKeyGenerationTimestamp *time.Time

	// [Easy DKIM] The key length of the future DKIM key pair to be generated. This
	// can be changed at most once per day.
	NextSigningKeyLength DkimSigningKeyLength

	// A string that indicates how DKIM was configured for the identity. These are the
	// possible values:
	//   - AWS_SES – Indicates that DKIM was configured for the identity by using Easy
	//   DKIM (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/easy-dkim.html) .
	//   - EXTERNAL – Indicates that DKIM was configured for the identity by using
	//   Bring Your Own DKIM (BYODKIM).
	SigningAttributesOrigin DkimSigningAttributesOrigin

	// If the value is true , then the messages that you send from the identity are
	// signed using DKIM. If the value is false , then the messages that you send from
	// the identity aren't DKIM-signed.
	SigningEnabled bool

	// Describes whether or not Amazon SES has successfully located the DKIM records
	// in the DNS records for the domain. The status can be one of the following:
	//   - PENDING – The verification process was initiated, but Amazon SES hasn't yet
	//   detected the DKIM records in the DNS configuration for the domain.
	//   - SUCCESS – The verification process completed successfully.
	//   - FAILED – The verification process failed. This typically occurs when Amazon
	//   SES fails to find the DKIM records in the DNS configuration of the domain.
	//   - TEMPORARY_FAILURE – A temporary issue is preventing Amazon SES from
	//   determining the DKIM authentication status of the domain.
	//   - NOT_STARTED – The DKIM verification process hasn't been initiated for the
	//   domain.
	Status DkimStatus

	// If you used Easy DKIM (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/easy-dkim.html)
	// to configure DKIM authentication for the domain, then this object contains a set
	// of unique strings that you use to create a set of CNAME records that you add to
	// the DNS configuration for your domain. When Amazon SES detects these records in
	// the DNS configuration for your domain, the DKIM authentication process is
	// complete. If you configured DKIM authentication for the domain by providing your
	// own public-private key pair, then this object contains the selector for the
	// public key. Regardless of the DKIM authentication method you use, Amazon SES
	// searches for the appropriate records in the DNS configuration of the domain for
	// up to 72 hours.
	Tokens []string
	// contains filtered or unexported fields
}

type DkimSigningAttributes struct {

	// [Bring Your Own DKIM] A private key that's used to generate a DKIM signature.
	// The private key must use 1024 or 2048-bit RSA encryption, and must be encoded
	// using base64 encoding.
	DomainSigningPrivateKey *string

	// [Bring Your Own DKIM] A string that's used to identify a public key in the DNS
	// configuration for a domain.
	DomainSigningSelector *string

	// [Easy DKIM] The key length of the future DKIM key pair to be generated. This
	// can be changed at most once per day.
	NextSigningKeyLength DkimSigningKeyLength
	// contains filtered or unexported fields
}

type DkimSigningAttributesOrigin string

type DkimSigningKeyLength string

type DkimStatus string

type DomainDeliverabilityCampaign struct {

	// The unique identifier for the campaign. The Deliverability dashboard
	// automatically generates and assigns this identifier to a campaign.
	CampaignId *string

	// The percentage of email messages that were deleted by recipients, without being
	// opened first. Due to technical limitations, this value only includes recipients
	// who opened the message by using an email client that supports images.
	DeleteRate *float64

	// The major email providers who handled the email message.
	Esps []string

	// The first time when the email message was delivered to any recipient's inbox.
	// This value can help you determine how long it took for a campaign to deliver an
	// email message.
	FirstSeenDateTime *time.Time

	// The verified email address that the email message was sent from.
	FromAddress *string

	// The URL of an image that contains a snapshot of the email message that was sent.
	ImageUrl *string

	// The number of email messages that were delivered to recipients’ inboxes.
	InboxCount *int64

	// The last time when the email message was delivered to any recipient's inbox.
	// This value can help you determine how long it took for a campaign to deliver an
	// email message.
	LastSeenDateTime *time.Time

	// The projected number of recipients that the email message was sent to.
	ProjectedVolume *int64

	// The percentage of email messages that were opened and then deleted by
	// recipients. Due to technical limitations, this value only includes recipients
	// who opened the message by using an email client that supports images.
	ReadDeleteRate *float64

	// The percentage of email messages that were opened by recipients. Due to
	// technical limitations, this value only includes recipients who opened the
	// message by using an email client that supports images.
	ReadRate *float64

	// The IP addresses that were used to send the email message.
	SendingIps []string

	// The number of email messages that were delivered to recipients' spam or junk
	// mail folders.
	SpamCount *int64

	// The subject line, or title, of the email message.
	Subject *string
	// contains filtered or unexported fields
}

type DomainDeliverabilityTrackingOption struct {

	// A verified domain that’s associated with your Amazon Web Services account and
	// currently has an active Deliverability dashboard subscription.
	Domain *string

	// An object that contains information about the inbox placement data settings for
	// the domain.
	InboxPlacementTrackingOption *InboxPlacementTrackingOption

	// The date when you enabled the Deliverability dashboard for the domain.
	SubscriptionStartDate *time.Time
	// contains filtered or unexported fields
}

type DomainIspPlacement struct {

	// The percentage of messages that were sent from the selected domain to the
	// specified email provider that arrived in recipients' inboxes.
	InboxPercentage *float64

	// The total number of messages that were sent from the selected domain to the
	// specified email provider that arrived in recipients' inboxes.
	InboxRawCount *int64

	// The name of the email provider that the inbox placement data applies to.
	IspName *string

	// The percentage of messages that were sent from the selected domain to the
	// specified email provider that arrived in recipients' spam or junk mail folders.
	SpamPercentage *float64

	// The total number of messages that were sent from the selected domain to the
	// specified email provider that arrived in recipients' spam or junk mail folders.
	SpamRawCount *int64
	// contains filtered or unexported fields
}

type EmailContent struct {

	// The raw email message. The message has to meet the following criteria:
	//   - The message has to contain a header and a body, separated by one blank
	//   line.
	//   - All of the required header fields must be present in the message.
	//   - Each part of a multipart MIME message must be formatted properly.
	//   - If you include attachments, they must be in a file format that the Amazon
	//   SES API v2 supports.
	//   - The raw data of the message needs to base64-encoded if you are accessing
	//   Amazon SES directly through the HTTPS interface. If you are accessing Amazon SES
	//   using an Amazon Web Services SDK, the SDK takes care of the base 64-encoding for
	//   you.
	//   - If any of the MIME parts in your message contain content that is outside of
	//   the 7-bit ASCII character range, you should encode that content to ensure that
	//   recipients' email clients render the message properly.
	//   - The length of any single line of text in the message can't exceed 1,000
	//   characters. This restriction is defined in RFC 5321 (https://tools.ietf.org/html/rfc5321)
	//   .
	Raw *RawMessage

	// The simple email message. The message consists of a subject and a message body.
	Simple *Message

	// The template to use for the email message.
	Template *Template
	// contains filtered or unexported fields
}

type EmailInsights struct {

	// The recipient of the email.
	Destination *string

	// A list of events associated with the sent email.
	Events []InsightsEvent

	// The recipient's ISP (e.g., Gmail , Yahoo , etc.).
	Isp *string
	// contains filtered or unexported fields
}

type EmailTemplateContent struct {

	// The HTML body of the email.
	Html *string

	// The subject line of the email.
	Subject *string

	// The email body that will be visible to recipients whose email clients do not
	// display HTML.
	Text *string
	// contains filtered or unexported fields
}

type EmailTemplateMetadata struct {

	// The time and date the template was created.
	CreatedTimestamp *time.Time

	// The name of the template.
	TemplateName *string
	// contains filtered or unexported fields
}

type EngagementEventType string

type EventDestination struct {

	// The types of events that Amazon SES sends to the specified event destinations.
	//   - SEND - The send request was successful and SES will attempt to deliver the
	//   message to the recipient’s mail server. (If account-level or global suppression
	//   is being used, SES will still count it as a send, but delivery is suppressed.)
	//   - REJECT - SES accepted the email, but determined that it contained a virus
	//   and didn’t attempt to deliver it to the recipient’s mail server.
	//   - BOUNCE - (Hard bounce) The recipient's mail server permanently rejected the
	//   email. (Soft bounces are only included when SES fails to deliver the email after
	//   retrying for a period of time.)
	//   - COMPLAINT - The email was successfully delivered to the recipient’s mail
	//   server, but the recipient marked it as spam.
	//   - DELIVERY - SES successfully delivered the email to the recipient's mail
	//   server.
	//   - OPEN - The recipient received the message and opened it in their email
	//   client.
	//   - CLICK - The recipient clicked one or more links in the email.
	//   - RENDERING_FAILURE - The email wasn't sent because of a template rendering
	//   issue. This event type can occur when template data is missing, or when there is
	//   a mismatch between template parameters and data. (This event type only occurs
	//   when you send email using the SendTemplatedEmail (https://docs.aws.amazon.com/ses/latest/APIReference/API_SendTemplatedEmail.html)
	//   or SendBulkTemplatedEmail (https://docs.aws.amazon.com/ses/latest/APIReference/API_SendBulkTemplatedEmail.html)
	//   API operations.)
	//   - DELIVERY_DELAY - The email couldn't be delivered to the recipient’s mail
	//   server because a temporary issue occurred. Delivery delays can occur, for
	//   example, when the recipient's inbox is full, or when the receiving email server
	//   experiences a transient issue.
	//   - SUBSCRIPTION - The email was successfully delivered, but the recipient
	//   updated their subscription preferences by clicking on an unsubscribe link as
	//   part of your subscription management (https://docs.aws.amazon.com/ses/latest/dg/sending-email-subscription-management.html)
	//   .
	//
	// This member is required.
	MatchingEventTypes []EventType

	// A name that identifies the event destination.
	//
	// This member is required.
	Name *string

	// An object that defines an Amazon CloudWatch destination for email events. You
	// can use Amazon CloudWatch to monitor and gain insights on your email sending
	// metrics.
	CloudWatchDestination *CloudWatchDestination

	// If true , the event destination is enabled. When the event destination is
	// enabled, the specified event types are sent to the destinations in this
	// EventDestinationDefinition . If false , the event destination is disabled. When
	// the event destination is disabled, events aren't sent to the specified
	// destinations.
	Enabled bool

	// An object that defines an Amazon Kinesis Data Firehose destination for email
	// events. You can use Amazon Kinesis Data Firehose to stream data to other
	// services, such as Amazon S3 and Amazon Redshift.
	KinesisFirehoseDestination *KinesisFirehoseDestination

	// An object that defines an Amazon Pinpoint project destination for email events.
	// You can send email event data to a Amazon Pinpoint project to view metrics using
	// the Transactional Messaging dashboards that are built in to Amazon Pinpoint. For
	// more information, see Transactional Messaging Charts (https://docs.aws.amazon.com/pinpoint/latest/userguide/analytics-transactional-messages.html)
	// in the Amazon Pinpoint User Guide.
	PinpointDestination *PinpointDestination

	// An object that defines an Amazon SNS destination for email events. You can use
	// Amazon SNS to send notification when certain email events occur.
	SnsDestination *SnsDestination
	// contains filtered or unexported fields
}

type EventDestinationDefinition struct {

	// An object that defines an Amazon CloudWatch destination for email events. You
	// can use Amazon CloudWatch to monitor and gain insights on your email sending
	// metrics.
	CloudWatchDestination *CloudWatchDestination

	// If true , the event destination is enabled. When the event destination is
	// enabled, the specified event types are sent to the destinations in this
	// EventDestinationDefinition . If false , the event destination is disabled. When
	// the event destination is disabled, events aren't sent to the specified
	// destinations.
	Enabled bool

	// An object that defines an Amazon Kinesis Data Firehose destination for email
	// events. You can use Amazon Kinesis Data Firehose to stream data to other
	// services, such as Amazon S3 and Amazon Redshift.
	KinesisFirehoseDestination *KinesisFirehoseDestination

	// An array that specifies which events the Amazon SES API v2 should send to the
	// destinations in this EventDestinationDefinition .
	MatchingEventTypes []EventType

	// An object that defines an Amazon Pinpoint project destination for email events.
	// You can send email event data to a Amazon Pinpoint project to view metrics using
	// the Transactional Messaging dashboards that are built in to Amazon Pinpoint. For
	// more information, see Transactional Messaging Charts (https://docs.aws.amazon.com/pinpoint/latest/userguide/analytics-transactional-messages.html)
	// in the Amazon Pinpoint User Guide.
	PinpointDestination *PinpointDestination

	// An object that defines an Amazon SNS destination for email events. You can use
	// Amazon SNS to send notification when certain email events occur.
	SnsDestination *SnsDestination
	// contains filtered or unexported fields
}

type EventDetails struct {

	// Information about a Bounce event.
	Bounce *Bounce

	// Information about a Complaint event.
	Complaint *Complaint
	// contains filtered or unexported fields
}

type EventType string

type ExportDataSource struct {

	// An object that contains filters applied when performing the Message Insights
	// export.
	MessageInsightsDataSource *MessageInsightsDataSource

	// An object that contains details about the data source for the metrics export.
	MetricsDataSource *MetricsDataSource
	// contains filtered or unexported fields
}

type ExportDestination struct {

	// The data format of the final export job file, can be one of the following:
	//   - CSV - A comma-separated values file.
	//   - JSON - A Json file.
	//
	// This member is required.
	DataFormat DataFormat

	// An Amazon S3 pre-signed URL that points to the generated export file.
	S3Url *string
	// contains filtered or unexported fields
}

type ExportJobSummary struct {

	// The timestamp of when the export job was completed.
	CompletedTimestamp *time.Time

	// The timestamp of when the export job was created.
	CreatedTimestamp *time.Time

	// The source type of the export job.
	ExportSourceType ExportSourceType

	// The export job ID.
	JobId *string

	// The status of the export job.
	JobStatus JobStatus
	// contains filtered or unexported fields
}

type ExportMetric struct {

	// The aggregation to apply to a metric, can be one of the following:
	//   - VOLUME - The volume of events for this metric.
	//   - RATE - The rate for this metric relative to the SEND metric volume.
	Aggregation MetricAggregation

	// The metric to export, can be one of the following:
	//   - SEND - Emails sent eligible for tracking in the VDM dashboard. This excludes
	//   emails sent to the mailbox simulator and emails addressed to more than one
	//   recipient.
	//   - COMPLAINT - Complaints received for your account. This excludes complaints
	//   from the mailbox simulator, those originating from your account-level
	//   suppression list (if enabled), and those for emails addressed to more than one
	//   recipient
	//   - PERMANENT_BOUNCE - Permanent bounces - i.e., feedback received for emails
	//   sent to non-existent mailboxes. Excludes bounces from the mailbox simulator,
	//   those originating from your account-level suppression list (if enabled), and
	//   those for emails addressed to more than one recipient.
	//   - TRANSIENT_BOUNCE - Transient bounces - i.e., feedback received for delivery
	//   failures excluding issues with non-existent mailboxes. Excludes bounces from the
	//   mailbox simulator, and those for emails addressed to more than one recipient.
	//   - OPEN - Unique open events for emails including open trackers. Excludes opens
	//   for emails addressed to more than one recipient.
	//   - CLICK - Unique click events for emails including wrapped links. Excludes
	//   clicks for emails addressed to more than one recipient.
	//   - DELIVERY - Successful deliveries for email sending attempts. Excludes
	//   deliveries to the mailbox simulator and for emails addressed to more than one
	//   recipient.
	//   - DELIVERY_OPEN - Successful deliveries for email sending attempts. Excludes
	//   deliveries to the mailbox simulator, for emails addressed to more than one
	//   recipient, and emails without open trackers.
	//   - DELIVERY_CLICK - Successful deliveries for email sending attempts. Excludes
	//   deliveries to the mailbox simulator, for emails addressed to more than one
	//   recipient, and emails without click trackers.
	//   - DELIVERY_COMPLAINT - Successful deliveries for email sending attempts.
	//   Excludes deliveries to the mailbox simulator, for emails addressed to more than
	//   one recipient, and emails addressed to recipients hosted by ISPs with which
	//   Amazon SES does not have a feedback loop agreement.
	Name Metric
	// contains filtered or unexported fields
}

type ExportSourceType string

type ExportStatistics struct {

	// The number of records that were exported to the final export file. This value
	// might not be available for all export source types
	ExportedRecordsCount *int32

	// The number of records that were processed to generate the final export file.
	ProcessedRecordsCount *int32
	// contains filtered or unexported fields
}

type FailureInfo struct {

	// A message about why the job failed.
	ErrorMessage *string

	// An Amazon S3 pre-signed URL that contains all the failed records and related
	// information.
	FailedRecordsS3Url *string
	// contains filtered or unexported fields
}

type FeatureStatus string

type GuardianAttributes struct {

	// Specifies the status of your VDM optimized shared delivery. Can be one of the
	// following:
	//   - ENABLED – Amazon SES enables optimized shared delivery for your account.
	//   - DISABLED – Amazon SES disables optimized shared delivery for your account.
	OptimizedSharedDelivery FeatureStatus
	// contains filtered or unexported fields
}

type GuardianOptions struct {

	// Specifies the status of your VDM optimized shared delivery. Can be one of the
	// following:
	//   - ENABLED – Amazon SES enables optimized shared delivery for the configuration
	//   set.
	//   - DISABLED – Amazon SES disables optimized shared delivery for the
	//   configuration set.
	OptimizedSharedDelivery FeatureStatus
	// contains filtered or unexported fields
}

type IdentityInfo struct {

	// The address or domain of the identity.
	IdentityName *string

	// The email identity type. Note: the MANAGED_DOMAIN type is not supported for
	// email identity types.
	IdentityType IdentityType

	// Indicates whether or not you can send email from the identity. An identity is
	// an email address or domain that you send email from. Before you can send email
	// from an identity, you have to demostrate that you own the identity, and that you
	// authorize Amazon SES to send email from that identity.
	SendingEnabled bool

	// The verification status of the identity. The status can be one of the
	// following:
	//   - PENDING – The verification process was initiated, but Amazon SES hasn't yet
	//   been able to verify the identity.
	//   - SUCCESS – The verification process completed successfully.
	//   - FAILED – The verification process failed.
	//   - TEMPORARY_FAILURE – A temporary issue is preventing Amazon SES from
	//   determining the verification status of the identity.
	//   - NOT_STARTED – The verification process hasn't been initiated for the
	//   identity.
	VerificationStatus VerificationStatus
	// contains filtered or unexported fields
}

type IdentityType string

type ImportDataSource struct {

	// The data format of the import job's data source.
	//
	// This member is required.
	DataFormat DataFormat

	// An Amazon S3 URL in the format s3:///.
	//
	// This member is required.
	S3Url *string
	// contains filtered or unexported fields
}

type ImportDestination struct {

	// An object that contains the action of the import job towards a contact list.
	ContactListDestination *ContactListDestination

	// An object that contains the action of the import job towards suppression list.
	SuppressionListDestination *SuppressionListDestination
	// contains filtered or unexported fields
}

type ImportDestinationType string

type ImportJobSummary struct {

	// The date and time when the import job was created.
	CreatedTimestamp *time.Time

	// The number of records that failed processing because of invalid input or other
	// reasons.
	FailedRecordsCount *int32

	// An object that contains details about the resource destination the import job
	// is going to target.
	ImportDestination *ImportDestination

	// A string that represents a job ID.
	JobId *string

	// The status of a job.
	//   - CREATED – Job has just been created.
	//   - PROCESSING – Job is processing.
	//   - ERROR – An error occurred during processing.
	//   - COMPLETED – Job has completed processing successfully.
	JobStatus JobStatus

	// The current number of records processed.
	ProcessedRecordsCount *int32
	// contains filtered or unexported fields
}

type InboxPlacementTrackingOption struct {

	// Specifies whether inbox placement data is being tracked for the domain.
	Global bool

	// An array of strings, one for each major email provider that the inbox placement
	// data applies to.
	TrackedIsps []string
	// contains filtered or unexported fields
}

type InsightsEvent struct {

	// Details about bounce or complaint events.
	Details *EventDetails

	// The timestamp of the event.
	Timestamp *time.Time

	// The type of event:
	//   - SEND - The send request was successful and SES will attempt to deliver the
	//   message to the recipient’s mail server. (If account-level or global suppression
	//   is being used, SES will still count it as a send, but delivery is suppressed.)
	//   - DELIVERY - SES successfully delivered the email to the recipient's mail
	//   server. Excludes deliveries to the mailbox simulator, and those from emails
	//   addressed to more than one recipient.
	//   - BOUNCE - Feedback received for delivery failures. Additional details about
	//   the bounce are provided in the Details object. Excludes bounces from the
	//   mailbox simulator, and those from emails addressed to more than one recipient.
	//   - COMPLAINT - Complaint received for the email. Additional details about the
	//   complaint are provided in the Details object. This excludes complaints from
	//   the mailbox simulator, those originating from your account-level suppression
	//   list (if enabled), and those from emails addressed to more than one recipient.
	//   - OPEN - Open event for emails including open trackers. Excludes opens for
	//   emails addressed to more than one recipient.
	//   - CLICK - Click event for emails including wrapped links. Excludes clicks for
	//   emails addressed to more than one recipient.
	Type EventType
	// contains filtered or unexported fields
}

type InternalServiceErrorException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type InvalidNextTokenException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type IspPlacement struct {

	// The name of the email provider that the inbox placement data applies to.
	IspName *string

	// An object that contains inbox placement metrics for a specific email provider.
	PlacementStatistics *PlacementStatistics
	// contains filtered or unexported fields
}

type JobStatus string

type KinesisFirehoseDestination struct {

	// The Amazon Resource Name (ARN) of the Amazon Kinesis Data Firehose stream that
	// the Amazon SES API v2 sends email events to.
	//
	// This member is required.
	DeliveryStreamArn *string

	// The Amazon Resource Name (ARN) of the IAM role that the Amazon SES API v2 uses
	// to send email events to the Amazon Kinesis Data Firehose stream.
	//
	// This member is required.
	IamRoleArn *string
	// contains filtered or unexported fields
}

type LimitExceededException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type ListContactsFilter struct {

	// The status by which you are filtering: OPT_IN or OPT_OUT .
	FilteredStatus SubscriptionStatus

	// Used for filtering by a specific topic preference.
	TopicFilter *TopicFilter
	// contains filtered or unexported fields
}

type ListManagementOptions struct {

	// The name of the contact list.
	//
	// This member is required.
	ContactListName *string

	// The name of the topic.
	TopicName *string
	// contains filtered or unexported fields
}

type ListRecommendationsFilterKey string

type MailFromAttributes struct {

	// The action to take if the required MX record can't be found when you send an
	// email. When you set this value to USE_DEFAULT_VALUE , the mail is sent using
	// amazonses.com as the MAIL FROM domain. When you set this value to REJECT_MESSAGE
	// , the Amazon SES API v2 returns a MailFromDomainNotVerified error, and doesn't
	// attempt to deliver the email. These behaviors are taken when the custom MAIL
	// FROM domain configuration is in the Pending , Failed , and TemporaryFailure
	// states.
	//
	// This member is required.
	BehaviorOnMxFailure BehaviorOnMxFailure

	// The name of a domain that an email identity uses as a custom MAIL FROM domain.
	//
	// This member is required.
	MailFromDomain *string

	// The status of the MAIL FROM domain. This status can have the following values:
	//   - PENDING – Amazon SES hasn't started searching for the MX record yet.
	//   - SUCCESS – Amazon SES detected the required MX record for the MAIL FROM
	//   domain.
	//   - FAILED – Amazon SES can't find the required MX record, or the record no
	//   longer exists.
	//   - TEMPORARY_FAILURE – A temporary issue occurred, which prevented Amazon SES
	//   from determining the status of the MAIL FROM domain.
	//
	// This member is required.
	MailFromDomainStatus MailFromDomainStatus
	// contains filtered or unexported fields
}

type MailFromDomainNotVerifiedException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type MailFromDomainStatus string

type MailType string

type Message struct {

	// The body of the message. You can specify an HTML version of the message, a
	// text-only version of the message, or both.
	//
	// This member is required.
	Body *Body

	// The subject line of the email. The subject line can only contain 7-bit ASCII
	// characters. However, you can specify non-ASCII characters in the subject line by
	// using encoded-word syntax, as described in RFC 2047 (https://tools.ietf.org/html/rfc2047)
	// .
	//
	// This member is required.
	Subject *Content

	// The list of message headers that will be added to the email message.
	Headers []MessageHeader
	// contains filtered or unexported fields
}

type MessageHeader struct {

	// The name of the message header. The message header name has to meet the
	// following criteria:
	//   - Can contain any printable ASCII character (33 - 126) except for colon (:).
	//   - Can contain no more than 126 characters.
	//
	// This member is required.
	Name *string

	// The value of the message header. The message header value has to meet the
	// following criteria:
	//   - Can contain any printable ASCII character.
	//   - Can contain no more than 870 characters.
	//
	// This member is required.
	Value *string
	// contains filtered or unexported fields
}

type MessageInsightsDataSource struct {

	// Represents the end date for the export interval as a timestamp. The end date is
	// inclusive.
	//
	// This member is required.
	EndDate *time.Time

	// Represents the start date for the export interval as a timestamp. The start
	// date is inclusive.
	//
	// This member is required.
	StartDate *time.Time

	// Filters for results to be excluded from the export file.
	Exclude *MessageInsightsFilters

	// Filters for results to be included in the export file.
	Include *MessageInsightsFilters

	// The maximum number of results.
	MaxResults *int32
	// contains filtered or unexported fields
}

type MessageInsightsFilters struct {

	// The recipient's email address.
	Destination []string

	// The from address used to send the message.
	FromEmailAddress []string

	// The recipient's ISP (e.g., Gmail , Yahoo , etc.).
	Isp []string

	// The last delivery-related event for the email, where the ordering is as
	// follows: SEND < BOUNCE < DELIVERY < COMPLAINT .
	LastDeliveryEvent []DeliveryEventType

	// The last engagement-related event for the email, where the ordering is as
	// follows: OPEN < CLICK . Engagement events are only available if Engagement
	// tracking (https://docs.aws.amazon.com/ses/latest/dg/vdm-settings.html) is
	// enabled.
	LastEngagementEvent []EngagementEventType

	// The subject line of the message.
	Subject []string
	// contains filtered or unexported fields
}

type MessageRejected struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type MessageTag struct {

	// The name of the message tag. The message tag name has to meet the following
	// criteria:
	//   - It can only contain ASCII letters (a–z, A–Z), numbers (0–9), underscores
	//   (_), or dashes (-).
	//   - It can contain no more than 256 characters.
	//
	// This member is required.
	Name *string

	// The value of the message tag. The message tag value has to meet the following
	// criteria:
	//   - It can only contain ASCII letters (a–z, A–Z), numbers (0–9), underscores
	//   (_), or dashes (-).
	//   - It can contain no more than 256 characters.
	//
	// This member is required.
	Value *string
	// contains filtered or unexported fields
}

type Metric string

type MetricAggregation string

type MetricDataError struct {

	// The query error code. Can be one of:
	//   - INTERNAL_FAILURE – Amazon SES has failed to process one of the queries.
	//   - ACCESS_DENIED – You have insufficient access to retrieve metrics based on
	//   the given query.
	Code QueryErrorCode

	// The query identifier.
	Id *string

	// The error message associated with the current query error.
	Message *string
	// contains filtered or unexported fields
}

type MetricDataResult struct {

	// The query identifier.
	Id *string

	// A list of timestamps for the metric data results.
	Timestamps []time.Time

	// A list of values (cumulative / sum) for the metric data results.
	Values []int64
	// contains filtered or unexported fields
}

type MetricDimensionName string

type MetricNamespace string

type MetricsDataSource struct {

	// An object that contains a mapping between a MetricDimensionName and
	// MetricDimensionValue to filter metrics by. Must contain a least 1 dimension but
	// no more than 3 unique ones.
	//
	// This member is required.
	Dimensions map[string][]string

	// Represents the end date for the export interval as a timestamp.
	//
	// This member is required.
	EndDate *time.Time

	// A list of ExportMetric objects to export.
	//
	// This member is required.
	Metrics []ExportMetric

	// The metrics namespace - e.g., VDM .
	//
	// This member is required.
	Namespace MetricNamespace

	// Represents the start date for the export interval as a timestamp.
	//
	// This member is required.
	StartDate *time.Time
	// contains filtered or unexported fields
}

type NotFoundException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type OverallVolume struct {

	// An object that contains inbox and junk mail placement metrics for individual
	// email providers.
	DomainIspPlacements []DomainIspPlacement

	// The percentage of emails that were sent from the domain that were read by their
	// recipients.
	ReadRatePercent *float64

	// An object that contains information about the numbers of messages that arrived
	// in recipients' inboxes and junk mail folders.
	VolumeStatistics *VolumeStatistics
	// contains filtered or unexported fields
}

type PinpointDestination struct {

	// The Amazon Resource Name (ARN) of the Amazon Pinpoint project to send email
	// events to.
	ApplicationArn *string
	// contains filtered or unexported fields
}

type PlacementStatistics struct {

	// The percentage of emails that were authenticated by using DomainKeys Identified
	// Mail (DKIM) during the predictive inbox placement test.
	DkimPercentage *float64

	// The percentage of emails that arrived in recipients' inboxes during the
	// predictive inbox placement test.
	InboxPercentage *float64

	// The percentage of emails that didn't arrive in recipients' inboxes at all
	// during the predictive inbox placement test.
	MissingPercentage *float64

	// The percentage of emails that arrived in recipients' spam or junk mail folders
	// during the predictive inbox placement test.
	SpamPercentage *float64

	// The percentage of emails that were authenticated by using Sender Policy
	// Framework (SPF) during the predictive inbox placement test.
	SpfPercentage *float64
	// contains filtered or unexported fields
}

type QueryErrorCode string

type RawMessage struct {

	// The raw email message. The message has to meet the following criteria:
	//   - The message has to contain a header and a body, separated by one blank
	//   line.
	//   - All of the required header fields must be present in the message.
	//   - Each part of a multipart MIME message must be formatted properly.
	//   - Attachments must be in a file format that the Amazon SES supports.
	//   - The raw data of the message needs to base64-encoded if you are accessing
	//   Amazon SES directly through the HTTPS interface. If you are accessing Amazon SES
	//   using an Amazon Web Services SDK, the SDK takes care of the base 64-encoding for
	//   you.
	//   - If any of the MIME parts in your message contain content that is outside of
	//   the 7-bit ASCII character range, you should encode that content to ensure that
	//   recipients' email clients render the message properly.
	//   - The length of any single line of text in the message can't exceed 1,000
	//   characters. This restriction is defined in RFC 5321 (https://tools.ietf.org/html/rfc5321)
	//   .
	//
	// This member is required.
	Data []byte
	// contains filtered or unexported fields
}

type Recommendation struct {

	// The first time this issue was encountered and the recommendation was generated.
	CreatedTimestamp *time.Time

	// The recommendation description / disambiguator - e.g. DKIM1 and DKIM2 are
	// different recommendations about your DKIM setup.
	Description *string

	// The recommendation impact, with values like HIGH or LOW .
	Impact RecommendationImpact

	// The last time the recommendation was updated.
	LastUpdatedTimestamp *time.Time

	// The resource affected by the recommendation, with values like
	// arn:aws:ses:us-east-1:123456789012:identity/example.com .
	ResourceArn *string

	// The recommendation status, with values like OPEN or FIXED .
	Status RecommendationStatus

	// The recommendation type, with values like DKIM , SPF , DMARC or BIMI .
	Type RecommendationType
	// contains filtered or unexported fields
}

type RecommendationImpact string

type RecommendationStatus string

type RecommendationType string

type ReplacementEmailContent struct {

	// The ReplacementTemplate associated with ReplacementEmailContent .
	ReplacementTemplate *ReplacementTemplate
	// contains filtered or unexported fields
}

type ReplacementTemplate struct {

	// A list of replacement values to apply to the template. This parameter is a JSON
	// object, typically consisting of key-value pairs in which the keys correspond to
	// replacement tags in the email template.
	ReplacementTemplateData *string
	// contains filtered or unexported fields
}

type ReputationOptions struct {

	// The date and time (in Unix time) when the reputation metrics were last given a
	// fresh start. When your account is given a fresh start, your reputation metrics
	// are calculated starting from the date of the fresh start.
	LastFreshStart *time.Time

	// If true , tracking of reputation metrics is enabled for the configuration set.
	// If false , tracking of reputation metrics is disabled for the configuration set.
	ReputationMetricsEnabled bool
	// contains filtered or unexported fields
}

type ReviewDetails struct {

	// The associated support center case ID (if any).
	CaseId *string

	// The status of the latest review of your account. The status can be one of the
	// following:
	//   - PENDING – We have received your appeal and are in the process of reviewing
	//   it.
	//   - GRANTED – Your appeal has been reviewed and your production access has been
	//   granted.
	//   - DENIED – Your appeal has been reviewed and your production access has been
	//   denied.
	//   - FAILED – An internal error occurred and we didn't receive your appeal. You
	//   can submit your appeal again.
	Status ReviewStatus
	// contains filtered or unexported fields
}

type ReviewStatus string

type SOARecord struct {

	// Administrative contact email from the SOA record.
	AdminEmail *string

	// Primary name server specified in the SOA record.
	PrimaryNameServer *string

	// Serial number from the SOA record.
	SerialNumber int64
	// contains filtered or unexported fields
}

type ScalingMode string

type SendQuota struct {

	// The maximum number of emails that you can send in the current Amazon Web
	// Services Region over a 24-hour period. A value of -1 signifies an unlimited
	// quota. (This value is also referred to as your sending quota.)
	Max24HourSend float64

	// The maximum number of emails that you can send per second in the current Amazon
	// Web Services Region. This value is also called your maximum sending rate or your
	// maximum TPS (transactions per second) rate.
	MaxSendRate float64

	// The number of emails sent from your Amazon SES account in the current Amazon
	// Web Services Region over the past 24 hours.
	SentLast24Hours float64
	// contains filtered or unexported fields
}

type SendingOptions struct {

	// If true , email sending is enabled for the configuration set. If false , email
	// sending is disabled for the configuration set.
	SendingEnabled bool
	// contains filtered or unexported fields
}

type SendingPausedException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type SnsDestination struct {

	// The Amazon Resource Name (ARN) of the Amazon SNS topic to publish email events
	// to. For more information about Amazon SNS topics, see the Amazon SNS Developer
	// Guide (https://docs.aws.amazon.com/sns/latest/dg/CreateTopic.html) .
	//
	// This member is required.
	TopicArn *string
	// contains filtered or unexported fields
}

type SubscriptionStatus string

type SuppressedDestination struct {

	// The email address that is on the suppression list for your account.
	//
	// This member is required.
	EmailAddress *string

	// The date and time when the suppressed destination was last updated, shown in
	// Unix time format.
	//
	// This member is required.
	LastUpdateTime *time.Time

	// The reason that the address was added to the suppression list for your account.
	//
	// This member is required.
	Reason SuppressionListReason

	// An optional value that can contain additional information about the reasons
	// that the address was added to the suppression list for your account.
	Attributes *SuppressedDestinationAttributes
	// contains filtered or unexported fields
}

type SuppressedDestinationAttributes struct {

	// A unique identifier that's generated when an email address is added to the
	// suppression list for your account.
	FeedbackId *string

	// The unique identifier of the email message that caused the email address to be
	// added to the suppression list for your account.
	MessageId *string
	// contains filtered or unexported fields
}

type SuppressedDestinationSummary struct {

	// The email address that's on the suppression list for your account.
	//
	// This member is required.
	EmailAddress *string

	// The date and time when the suppressed destination was last updated, shown in
	// Unix time format.
	//
	// This member is required.
	LastUpdateTime *time.Time

	// The reason that the address was added to the suppression list for your account.
	//
	// This member is required.
	Reason SuppressionListReason
	// contains filtered or unexported fields
}

type SuppressionAttributes struct {

	// A list that contains the reasons that email addresses will be automatically
	// added to the suppression list for your account. This list can contain any or all
	// of the following:
	//   - COMPLAINT – Amazon SES adds an email address to the suppression list for
	//   your account when a message sent to that address results in a complaint.
	//   - BOUNCE – Amazon SES adds an email address to the suppression list for your
	//   account when a message sent to that address results in a hard bounce.
	SuppressedReasons []SuppressionListReason
	// contains filtered or unexported fields
}

type SuppressionListDestination struct {

	// The type of action to perform on the address. The following are possible
	// values:
	//   - PUT: add the addresses to the suppression list. If the record already
	//   exists, it will override it with the new value.
	//   - DELETE: remove the addresses from the suppression list.
	//
	// This member is required.
	SuppressionListImportAction SuppressionListImportAction
	// contains filtered or unexported fields
}

type SuppressionListImportAction string

type SuppressionListReason string

type SuppressionOptions struct {

	// A list that contains the reasons that email addresses are automatically added
	// to the suppression list for your account. This list can contain any or all of
	// the following:
	//   - COMPLAINT – Amazon SES adds an email address to the suppression list for
	//   your account when a message sent to that address results in a complaint.
	//   - BOUNCE – Amazon SES adds an email address to the suppression list for your
	//   account when a message sent to that address results in a hard bounce.
	SuppressedReasons []SuppressionListReason
	// contains filtered or unexported fields
}

type Tag struct {

	// One part of a key-value pair that defines a tag. The maximum length of a tag
	// key is 128 characters. The minimum length is 1 character.
	//
	// This member is required.
	Key *string

	// The optional part of a key-value pair that defines a tag. The maximum length of
	// a tag value is 256 characters. The minimum length is 0 characters. If you don't
	// want a resource to have a specific tag value, don't specify a value for this
	// parameter. If you don't specify a value, Amazon SES sets the value to an empty
	// string.
	//
	// This member is required.
	Value *string
	// contains filtered or unexported fields
}

type Template struct {

	// The list of message headers that will be added to the email message.
	Headers []MessageHeader

	// The Amazon Resource Name (ARN) of the template.
	TemplateArn *string

	// An object that defines the values to use for message variables in the template.
	// This object is a set of key-value pairs. Each key defines a message variable in
	// the template. The corresponding value defines the value to use for that
	// variable.
	TemplateData *string

	// The name of the template. You will refer to this name when you send email using
	// the SendTemplatedEmail or SendBulkTemplatedEmail operations.
	TemplateName *string
	// contains filtered or unexported fields
}

type TlsPolicy string

type TooManyRequestsException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type Topic struct {

	// The default subscription status to be applied to a contact if the contact has
	// not noted their preference for subscribing to a topic.
	//
	// This member is required.
	DefaultSubscriptionStatus SubscriptionStatus

	// The name of the topic the contact will see.
	//
	// This member is required.
	DisplayName *string

	// The name of the topic.
	//
	// This member is required.
	TopicName *string

	// A description of what the topic is about, which the contact will see.
	Description *string
	// contains filtered or unexported fields
}

type TopicFilter struct {

	// The name of a topic on which you wish to apply the filter.
	TopicName *string

	// Notes that the default subscription status should be applied to a contact
	// because the contact has not noted their preference for subscribing to a topic.
	UseDefaultIfPreferenceUnavailable bool
	// contains filtered or unexported fields
}

type TopicPreference struct {

	// The contact's subscription status to a topic which is either OPT_IN or OPT_OUT .
	//
	// This member is required.
	SubscriptionStatus SubscriptionStatus

	// The name of the topic.
	//
	// This member is required.
	TopicName *string
	// contains filtered or unexported fields
}

type TrackingOptions struct {

	// The domain to use for tracking open and click events.
	//
	// This member is required.
	CustomRedirectDomain *string
	// contains filtered or unexported fields
}

type VdmAttributes struct {

	// Specifies the status of your VDM configuration. Can be one of the following:
	//   - ENABLED – Amazon SES enables VDM for your account.
	//   - DISABLED – Amazon SES disables VDM for your account.
	//
	// This member is required.
	VdmEnabled FeatureStatus

	// Specifies additional settings for your VDM configuration as applicable to the
	// Dashboard.
	DashboardAttributes *DashboardAttributes

	// Specifies additional settings for your VDM configuration as applicable to the
	// Guardian.
	GuardianAttributes *GuardianAttributes
	// contains filtered or unexported fields
}

type VdmOptions struct {

	// Specifies additional settings for your VDM configuration as applicable to the
	// Dashboard.
	DashboardOptions *DashboardOptions

	// Specifies additional settings for your VDM configuration as applicable to the
	// Guardian.
	GuardianOptions *GuardianOptions
	// contains filtered or unexported fields
}

type VerificationError string

type VerificationInfo struct {

	// Provides the reason for the failure describing why Amazon SES was not able to
	// successfully verify the identity. Below are the possible values:
	//   - INVALID_VALUE – Amazon SES was able to find the record, but the value
	//   contained within the record was invalid. Ensure you have published the correct
	//   values for the record.
	//   - TYPE_NOT_FOUND – The queried hostname exists but does not have the requested
	//   type of DNS record. Ensure that you have published the correct type of DNS
	//   record.
	//   - HOST_NOT_FOUND – The queried hostname does not exist or was not reachable at
	//   the time of the request. Ensure that you have published the required DNS
	//   record(s).
	//   - SERVICE_ERROR – A temporary issue is preventing Amazon SES from determining
	//   the verification status of the domain.
	//   - DNS_SERVER_ERROR – The DNS server encountered an issue and was unable to
	//   complete the request.
	ErrorType VerificationError

	// The last time a verification attempt was made for this identity.
	LastCheckedTimestamp *time.Time

	// The last time a successful verification was made for this identity.
	LastSuccessTimestamp *time.Time

	// An object that contains information about the start of authority (SOA) record
	// associated with the identity.
	SOARecord *SOARecord
	// contains filtered or unexported fields
}

type VerificationStatus string

type VolumeStatistics struct {

	// The total number of emails that arrived in recipients' inboxes.
	InboxRawCount *int64

	// An estimate of the percentage of emails sent from the current domain that will
	// arrive in recipients' inboxes.
	ProjectedInbox *int64

	// An estimate of the percentage of emails sent from the current domain that will
	// arrive in recipients' spam or junk mail folders.
	ProjectedSpam *int64

	// The total number of emails that arrived in recipients' spam or junk mail
	// folders.
	SpamRawCount *int64
	// contains filtered or unexported fields
}

type WarmupStatus string