types

type BatchEntryIdsNotDistinct struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type BatchRequestTooLong struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type BatchResultErrorEntry struct {

	// An error code representing why the action failed on this entry.
	//
	// This member is required.
	Code *string

	// The Id of an entry in a batch request.
	//
	// This member is required.
	Id *string

	// Specifies whether the error happened due to the caller of the batch API action.
	//
	// This member is required.
	SenderFault bool

	// A message explaining why the action failed on this entry.
	Message *string
	// contains filtered or unexported fields
}

type ChangeMessageVisibilityBatchRequestEntry struct {

	// An identifier for this particular receipt handle used to communicate the
	// result. The Id s of a batch request need to be unique within a request. This
	// identifier can have up to 80 characters. The following characters are accepted:
	// alphanumeric characters, hyphens(-), and underscores (_).
	//
	// This member is required.
	Id *string

	// A receipt handle.
	//
	// This member is required.
	ReceiptHandle *string

	// The new value (in seconds) for the message's visibility timeout.
	VisibilityTimeout int32
	// contains filtered or unexported fields
}

type ChangeMessageVisibilityBatchResultEntry struct {

	// Represents a message whose visibility timeout has been changed successfully.
	//
	// This member is required.
	Id *string
	// contains filtered or unexported fields
}

type DeleteMessageBatchRequestEntry struct {

	// The identifier for this particular receipt handle. This is used to communicate
	// the result. The Id s of a batch request need to be unique within a request. This
	// identifier can have up to 80 characters. The following characters are accepted:
	// alphanumeric characters, hyphens(-), and underscores (_).
	//
	// This member is required.
	Id *string

	// A receipt handle.
	//
	// This member is required.
	ReceiptHandle *string
	// contains filtered or unexported fields
}

type DeleteMessageBatchResultEntry struct {

	// Represents a successfully deleted message.
	//
	// This member is required.
	Id *string
	// contains filtered or unexported fields
}

type EmptyBatchRequest struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type InvalidAddress struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type InvalidAttributeName struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type InvalidAttributeValue struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type InvalidBatchEntryId struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type InvalidIdFormat struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type InvalidMessageContents struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type InvalidSecurity struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type KmsAccessDenied struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type KmsDisabled struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type KmsInvalidKeyUsage struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type KmsInvalidState struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type KmsNotFound struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type KmsOptInRequired struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type KmsThrottled struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type ListMessageMoveTasksResultEntry struct {

	// The approximate number of messages already moved to the destination queue.
	ApproximateNumberOfMessagesMoved int64

	// The number of messages to be moved from the source queue. This number is
	// obtained at the time of starting the message movement task.
	ApproximateNumberOfMessagesToMove *int64

	// The ARN of the destination queue if it has been specified in the
	// StartMessageMoveTask request. If a DestinationArn has not been specified in the
	// StartMessageMoveTask request, this field value will be NULL.
	DestinationArn *string

	// The task failure reason (only included if the task status is FAILED).
	FailureReason *string

	// The number of messages to be moved per second (the message movement rate), if
	// it has been specified in the StartMessageMoveTask request. If a
	// MaxNumberOfMessagesPerSecond has not been specified in the StartMessageMoveTask
	// request, this field value will be NULL.
	MaxNumberOfMessagesPerSecond *int32

	// The ARN of the queue that contains the messages to be moved to another queue.
	SourceArn *string

	// The timestamp of starting the message movement task.
	StartedTimestamp int64

	// The status of the message movement task. Possible values are: RUNNING,
	// COMPLETED, CANCELLING, CANCELLED, and FAILED.
	Status *string

	// An identifier associated with a message movement task. When this field is
	// returned in the response of the ListMessageMoveTasks action, it is only
	// populated for tasks that are in RUNNING status.
	TaskHandle *string
	// contains filtered or unexported fields
}

type Message struct {

	// A map of the attributes requested in ReceiveMessage to their respective values.
	// Supported attributes:
	//   - ApproximateReceiveCount
	//   - ApproximateFirstReceiveTimestamp
	//   - MessageDeduplicationId
	//   - MessageGroupId
	//   - SenderId
	//   - SentTimestamp
	//   - SequenceNumber
	// ApproximateFirstReceiveTimestamp and SentTimestamp are each returned as an
	// integer representing the epoch time (http://en.wikipedia.org/wiki/Unix_time) in
	// milliseconds.
	Attributes map[string]string

	// The message's contents (not URL-encoded).
	Body *string

	// An MD5 digest of the non-URL-encoded message body string.
	MD5OfBody *string

	// An MD5 digest of the non-URL-encoded message attribute string. You can use this
	// attribute to verify that Amazon SQS received the message correctly. Amazon SQS
	// URL-decodes the message before creating the MD5 digest. For information about
	// MD5, see RFC1321 (https://www.ietf.org/rfc/rfc1321.txt) .
	MD5OfMessageAttributes *string

	// Each message attribute consists of a Name , Type , and Value . For more
	// information, see Amazon SQS message attributes (https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-message-metadata.html#sqs-message-attributes)
	// in the Amazon SQS Developer Guide.
	MessageAttributes map[string]MessageAttributeValue

	// A unique identifier for the message. A MessageId is considered unique across all
	// Amazon Web Services accounts for an extended period of time.
	MessageId *string

	// An identifier associated with the act of receiving the message. A new receipt
	// handle is returned every time you receive a message. When deleting a message,
	// you provide the last received receipt handle to delete the message.
	ReceiptHandle *string
	// contains filtered or unexported fields
}

type MessageAttributeValue struct {

	// Amazon SQS supports the following logical data types: String , Number , and
	// Binary . For the Number data type, you must use StringValue . You can also
	// append custom labels. For more information, see Amazon SQS Message Attributes (https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-message-metadata.html#sqs-message-attributes)
	// in the Amazon SQS Developer Guide.
	//
	// This member is required.
	DataType *string

	// Not implemented. Reserved for future use.
	BinaryListValues [][]byte

	// Binary type attributes can store any binary data, such as compressed data,
	// encrypted data, or images.
	BinaryValue []byte

	// Not implemented. Reserved for future use.
	StringListValues []string

	// Strings are Unicode with UTF-8 binary encoding. For a list of code values, see
	// ASCII Printable Characters (http://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters)
	// .
	StringValue *string
	// contains filtered or unexported fields
}

type MessageNotInflight struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type MessageSystemAttributeName string

type MessageSystemAttributeNameForSends string

type MessageSystemAttributeValue struct {

	// Amazon SQS supports the following logical data types: String , Number , and
	// Binary . For the Number data type, you must use StringValue . You can also
	// append custom labels. For more information, see Amazon SQS Message Attributes (https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-message-metadata.html#sqs-message-attributes)
	// in the Amazon SQS Developer Guide.
	//
	// This member is required.
	DataType *string

	// Not implemented. Reserved for future use.
	BinaryListValues [][]byte

	// Binary type attributes can store any binary data, such as compressed data,
	// encrypted data, or images.
	BinaryValue []byte

	// Not implemented. Reserved for future use.
	StringListValues []string

	// Strings are Unicode with UTF-8 binary encoding. For a list of code values, see
	// ASCII Printable Characters (http://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters)
	// .
	StringValue *string
	// contains filtered or unexported fields
}

type OverLimit struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type PurgeQueueInProgress struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type QueueAttributeName string

type QueueDeletedRecently struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type QueueDoesNotExist struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type QueueNameExists struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type ReceiptHandleIsInvalid struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type RequestThrottled struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type ResourceNotFoundException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type SendMessageBatchRequestEntry struct {

	// An identifier for a message in this batch used to communicate the result. The Id
	// s of a batch request need to be unique within a request. This identifier can
	// have up to 80 characters. The following characters are accepted: alphanumeric
	// characters, hyphens(-), and underscores (_).
	//
	// This member is required.
	Id *string

	// The body of the message.
	//
	// This member is required.
	MessageBody *string

	// The length of time, in seconds, for which a specific message is delayed. Valid
	// values: 0 to 900. Maximum: 15 minutes. Messages with a positive DelaySeconds
	// value become available for processing after the delay period is finished. If you
	// don't specify a value, the default value for the queue is applied. When you set
	// FifoQueue , you can't set DelaySeconds per message. You can set this parameter
	// only on a queue level.
	DelaySeconds int32

	// Each message attribute consists of a Name , Type , and Value . For more
	// information, see Amazon SQS message attributes (https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-message-metadata.html#sqs-message-attributes)
	// in the Amazon SQS Developer Guide.
	MessageAttributes map[string]MessageAttributeValue

	// This parameter applies only to FIFO (first-in-first-out) queues. The token used
	// for deduplication of messages within a 5-minute minimum deduplication interval.
	// If a message with a particular MessageDeduplicationId is sent successfully,
	// subsequent messages with the same MessageDeduplicationId are accepted
	// successfully but aren't delivered. For more information, see Exactly-once
	// processing (https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues-exactly-once-processing.html)
	// in the Amazon SQS Developer Guide.
	//   - Every message must have a unique MessageDeduplicationId ,
	//   - You may provide a MessageDeduplicationId explicitly.
	//   - If you aren't able to provide a MessageDeduplicationId and you enable
	//   ContentBasedDeduplication for your queue, Amazon SQS uses a SHA-256 hash to
	//   generate the MessageDeduplicationId using the body of the message (but not the
	//   attributes of the message).
	//   - If you don't provide a MessageDeduplicationId and the queue doesn't have
	//   ContentBasedDeduplication set, the action fails with an error.
	//   - If the queue has ContentBasedDeduplication set, your MessageDeduplicationId
	//   overrides the generated one.
	//   - When ContentBasedDeduplication is in effect, messages with identical content
	//   sent within the deduplication interval are treated as duplicates and only one
	//   copy of the message is delivered.
	//   - If you send one message with ContentBasedDeduplication enabled and then
	//   another message with a MessageDeduplicationId that is the same as the one
	//   generated for the first MessageDeduplicationId , the two messages are treated
	//   as duplicates and only one copy of the message is delivered.
	// The MessageDeduplicationId is available to the consumer of the message (this
	// can be useful for troubleshooting delivery issues). If a message is sent
	// successfully but the acknowledgement is lost and the message is resent with the
	// same MessageDeduplicationId after the deduplication interval, Amazon SQS can't
	// detect duplicate messages. Amazon SQS continues to keep track of the message
	// deduplication ID even after the message is received and deleted. The length of
	// MessageDeduplicationId is 128 characters. MessageDeduplicationId can contain
	// alphanumeric characters ( a-z , A-Z , 0-9 ) and punctuation (
	// !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~ ). For best practices of using
	// MessageDeduplicationId , see Using the MessageDeduplicationId Property (https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/using-messagededuplicationid-property.html)
	// in the Amazon SQS Developer Guide.
	MessageDeduplicationId *string

	// This parameter applies only to FIFO (first-in-first-out) queues. The tag that
	// specifies that a message belongs to a specific message group. Messages that
	// belong to the same message group are processed in a FIFO manner (however,
	// messages in different message groups might be processed out of order). To
	// interleave multiple ordered streams within a single queue, use MessageGroupId
	// values (for example, session data for multiple users). In this scenario,
	// multiple consumers can process the queue, but the session data of each user is
	// processed in a FIFO fashion.
	//   - You must associate a non-empty MessageGroupId with a message. If you don't
	//   provide a MessageGroupId , the action fails.
	//   - ReceiveMessage might return messages with multiple MessageGroupId values.
	//   For each MessageGroupId , the messages are sorted by time sent. The caller
	//   can't specify a MessageGroupId .
	// The length of MessageGroupId is 128 characters. Valid values: alphanumeric
	// characters and punctuation (!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~) . For best
	// practices of using MessageGroupId , see Using the MessageGroupId Property (https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/using-messagegroupid-property.html)
	// in the Amazon SQS Developer Guide. MessageGroupId is required for FIFO queues.
	// You can't use it for Standard queues.
	MessageGroupId *string

	// The message system attribute to send Each message system attribute consists of
	// a Name , Type , and Value .
	//   - Currently, the only supported message system attribute is AWSTraceHeader .
	//   Its type must be String and its value must be a correctly formatted X-Ray
	//   trace header string.
	//   - The size of a message system attribute doesn't count towards the total size
	//   of a message.
	MessageSystemAttributes map[string]MessageSystemAttributeValue
	// contains filtered or unexported fields
}

type SendMessageBatchResultEntry struct {

	// An identifier for the message in this batch.
	//
	// This member is required.
	Id *string

	// An MD5 digest of the non-URL-encoded message body string. You can use this
	// attribute to verify that Amazon SQS received the message correctly. Amazon SQS
	// URL-decodes the message before creating the MD5 digest. For information about
	// MD5, see RFC1321 (https://www.ietf.org/rfc/rfc1321.txt) .
	//
	// This member is required.
	MD5OfMessageBody *string

	// An identifier for the message.
	//
	// This member is required.
	MessageId *string

	// An MD5 digest of the non-URL-encoded message attribute string. You can use this
	// attribute to verify that Amazon SQS received the message correctly. Amazon SQS
	// URL-decodes the message before creating the MD5 digest. For information about
	// MD5, see RFC1321 (https://www.ietf.org/rfc/rfc1321.txt) .
	MD5OfMessageAttributes *string

	// An MD5 digest of the non-URL-encoded message system attribute string. You can
	// use this attribute to verify that Amazon SQS received the message correctly.
	// Amazon SQS URL-decodes the message before creating the MD5 digest. For
	// information about MD5, see RFC1321 (https://www.ietf.org/rfc/rfc1321.txt) .
	MD5OfMessageSystemAttributes *string

	// This parameter applies only to FIFO (first-in-first-out) queues. The large,
	// non-consecutive number that Amazon SQS assigns to each message. The length of
	// SequenceNumber is 128 bits. As SequenceNumber continues to increase for a
	// particular MessageGroupId .
	SequenceNumber *string
	// contains filtered or unexported fields
}

type TooManyEntriesInBatchRequest struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type UnsupportedOperation struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}