types

type ActiveDirectoryStatus string

type AutomaticTapeCreationPolicyInfo struct {

	// An automatic tape creation policy consists of a list of automatic tape creation
	// rules. This returns the rules that determine when and how to automatically
	// create new tapes.
	AutomaticTapeCreationRules []AutomaticTapeCreationRule

	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and Amazon Web Services Region.
	GatewayARN *string
	// contains filtered or unexported fields
}

type AutomaticTapeCreationRule struct {

	// The minimum number of available virtual tapes that the gateway maintains at all
	// times. If the number of tapes on the gateway goes below this value, the gateway
	// creates as many new tapes as are needed to have MinimumNumTapes on the gateway.
	// For more information about automatic tape creation, see Creating Tapes
	// Automatically (https://docs.aws.amazon.com/storagegateway/latest/userguide/GettingStartedCreateTapes.html#CreateTapesAutomatically)
	// .
	//
	// This member is required.
	MinimumNumTapes *int32

	// The ID of the pool that you want to add your tape to for archiving. The tape in
	// this pool is archived in the Amazon S3 storage class that is associated with the
	// pool. When you use your backup application to eject the tape, the tape is
	// archived directly into the storage class (S3 Glacier or S3 Glacier Deep Archive)
	// that corresponds to the pool.
	//
	// This member is required.
	PoolId *string

	// A prefix that you append to the barcode of the virtual tape that you are
	// creating. This prefix makes the barcode unique. The prefix must be 1-4
	// characters in length and must be one of the uppercase letters from A to Z.
	//
	// This member is required.
	TapeBarcodePrefix *string

	// The size, in bytes, of the virtual tape capacity.
	//
	// This member is required.
	TapeSizeInBytes *int64

	// Set to true to indicate that tapes are to be archived as write-once-read-many
	// (WORM). Set to false when WORM is not enabled for tapes.
	Worm bool
	// contains filtered or unexported fields
}

type AvailabilityMonitorTestStatus string

type BandwidthRateLimitInterval struct {

	// The days of the week component of the bandwidth rate limit interval,
	// represented as ordinal numbers from 0 to 6, where 0 represents Sunday and 6
	// represents Saturday.
	//
	// This member is required.
	DaysOfWeek []int32

	// The hour of the day to end the bandwidth rate limit interval.
	//
	// This member is required.
	EndHourOfDay *int32

	// The minute of the hour to end the bandwidth rate limit interval. The bandwidth
	// rate limit interval ends at the end of the minute. To end an interval at the end
	// of an hour, use the value 59 .
	//
	// This member is required.
	EndMinuteOfHour *int32

	// The hour of the day to start the bandwidth rate limit interval.
	//
	// This member is required.
	StartHourOfDay *int32

	// The minute of the hour to start the bandwidth rate limit interval. The interval
	// begins at the start of that minute. To begin an interval exactly at the start of
	// the hour, use the value 0 .
	//
	// This member is required.
	StartMinuteOfHour *int32

	// The average download rate limit component of the bandwidth rate limit interval,
	// in bits per second. This field does not appear in the response if the download
	// rate limit is not set.
	AverageDownloadRateLimitInBitsPerSec *int64

	// The average upload rate limit component of the bandwidth rate limit interval,
	// in bits per second. This field does not appear in the response if the upload
	// rate limit is not set. For Tape Gateway and Volume Gateway, the minimum value is
	// 51200 . For S3 File Gateway and FSx File Gateway, the minimum value is 104857600
	// .
	AverageUploadRateLimitInBitsPerSec *int64
	// contains filtered or unexported fields
}

type CacheAttributes struct {

	// Refreshes a file share's cache by using Time To Live (TTL). TTL is the length
	// of time since the last refresh after which access to the directory would cause
	// the file gateway to first refresh that directory's contents from the Amazon S3
	// bucket or Amazon FSx file system. The TTL duration is in seconds. Valid
	// Values:0, 300 to 2,592,000 seconds (5 minutes to 30 days)
	CacheStaleTimeoutInSeconds *int32
	// contains filtered or unexported fields
}

type CachediSCSIVolume struct {

	// The date the volume was created. Volumes created prior to March 28, 2017 don’t
	// have this timestamp.
	CreatedDate *time.Time

	// The Amazon Resource Name (ARN) of a symmetric customer master key (CMK) used
	// for Amazon S3 server-side encryption. Storage Gateway does not support
	// asymmetric CMKs. This value can only be set when KMSEncrypted is true . Optional.
	KMSKey *string

	// If the cached volume was created from a snapshot, this field contains the
	// snapshot ID used, e.g., snap-78e22663. Otherwise, this field is not included.
	SourceSnapshotId *string

	// The name of the iSCSI target used by an initiator to connect to a volume and
	// used as a suffix for the target ARN. For example, specifying TargetName as
	// myvolume results in the target ARN of
	// arn:aws:storagegateway:us-east-2:111122223333:gateway/sgw-12A3456B/target/iqn.1997-05.com.amazon:myvolume
	// . The target name must be unique across all volumes on a gateway. If you don't
	// specify a value, Storage Gateway uses the value that was previously used for
	// this volume as the new target name.
	TargetName *string

	// The Amazon Resource Name (ARN) of the storage volume.
	VolumeARN *string

	// A value that indicates whether a storage volume is attached to or detached from
	// a gateway. For more information, see Moving your volumes to a different gateway (https://docs.aws.amazon.com/storagegateway/latest/userguide/managing-volumes.html#attach-detach-volume)
	// .
	VolumeAttachmentStatus *string

	// The unique identifier of the volume, e.g., vol-AE4B946D.
	VolumeId *string

	// Represents the percentage complete if the volume is restoring or bootstrapping
	// that represents the percent of data transferred. This field does not appear in
	// the response if the cached volume is not restoring or bootstrapping.
	VolumeProgress *float64

	// The size, in bytes, of the volume capacity.
	VolumeSizeInBytes int64

	// One of the VolumeStatus values that indicates the state of the storage volume.
	VolumeStatus *string

	// One of the VolumeType enumeration values that describes the type of the volume.
	VolumeType *string

	// The size of the data stored on the volume in bytes. This value is calculated
	// based on the number of blocks that are touched, instead of the actual amount of
	// data written. This value can be useful for sequential write patterns but less
	// accurate for random write patterns. VolumeUsedInBytes is different from the
	// compressed size of the volume, which is the value that is used to calculate your
	// bill. This value is not available for volumes created prior to May 13, 2015,
	// until you store data on the volume. If you use a delete tool that overwrites the
	// data on your volume with random data, your usage will not be reduced. This is
	// because the random data is not compressible. If you want to reduce the amount of
	// billed storage on your volume, we recommend overwriting your files with zeros to
	// compress the data to a negligible amount of actual storage.
	VolumeUsedInBytes *int64

	// An VolumeiSCSIAttributes object that represents a collection of iSCSI
	// attributes for one stored volume.
	VolumeiSCSIAttributes *VolumeiSCSIAttributes
	// contains filtered or unexported fields
}

type CaseSensitivity string

type ChapInfo struct {

	// The iSCSI initiator that connects to the target.
	InitiatorName *string

	// The secret key that the initiator (for example, the Windows client) must
	// provide to participate in mutual CHAP with the target.
	SecretToAuthenticateInitiator *string

	// The secret key that the target must provide to participate in mutual CHAP with
	// the initiator (e.g., Windows client).
	SecretToAuthenticateTarget *string

	// The Amazon Resource Name (ARN) of the volume. Valid Values: 50 to 500 lowercase
	// letters, numbers, periods (.), and hyphens (-).
	TargetARN *string
	// contains filtered or unexported fields
}

type DeviceiSCSIAttributes struct {

	// Indicates whether mutual CHAP is enabled for the iSCSI target.
	ChapEnabled bool

	// The network interface identifier of the VTL device.
	NetworkInterfaceId *string

	// The port used to communicate with iSCSI VTL device targets.
	NetworkInterfacePort int32

	// Specifies the unique Amazon Resource Name (ARN) that encodes the iSCSI
	// qualified name(iqn) of a tape drive or media changer target.
	TargetARN *string
	// contains filtered or unexported fields
}

type Disk struct {

	// The iSCSI qualified name (IQN) that is defined for a disk. This field is not
	// included in the response if the local disk is not defined as an iSCSI target.
	// The format of this field is targetIqn::LUNNumber::region-volumeId.
	DiskAllocationResource *string

	// One of the DiskAllocationType enumeration values that identifies how a local
	// disk is used. Valid Values: UPLOAD_BUFFER | CACHE_STORAGE
	DiskAllocationType *string

	// A list of values that represents attributes of a local disk.
	DiskAttributeList []string

	// The unique device ID or other distinguishing data that identifies a local disk.
	DiskId *string

	// The device node of a local disk as assigned by the virtualization environment.
	DiskNode *string

	// The path of a local disk in the gateway virtual machine (VM).
	DiskPath *string

	// The local disk size in bytes.
	DiskSizeInBytes int64

	// A value that represents the status of a local disk.
	DiskStatus *string
	// contains filtered or unexported fields
}

type EndpointNetworkConfiguration struct {

	// A list of gateway IP addresses on which the associated Amazon FSx file system
	// is available. If multiple file systems are associated with this gateway, this
	// field is required.
	IpAddresses []string
	// contains filtered or unexported fields
}

type ErrorCode string

type FileShareInfo struct {

	// The Amazon Resource Name (ARN) of the file share.
	FileShareARN *string

	// The ID of the file share.
	FileShareId *string

	// The status of the file share. Valid Values: CREATING | UPDATING | AVAILABLE |
	// DELETING
	FileShareStatus *string

	// The type of the file share.
	FileShareType FileShareType

	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and Amazon Web Services Region.
	GatewayARN *string
	// contains filtered or unexported fields
}

type FileShareType string

type FileSystemAssociationInfo struct {

	// The Amazon Resource Name (ARN) of the storage used for the audit logs.
	AuditDestinationARN *string

	// The refresh cache information for the file share or FSx file systems.
	CacheAttributes *CacheAttributes

	// Specifies network configuration information for the gateway associated with the
	// Amazon FSx file system. If multiple file systems are associated with this
	// gateway, this parameter's IpAddresses field is required.
	EndpointNetworkConfiguration *EndpointNetworkConfiguration

	// The Amazon Resource Name (ARN) of the file system association.
	FileSystemAssociationARN *string

	// The status of the file system association. Valid Values: AVAILABLE | CREATING |
	// DELETING | FORCE_DELETING | UPDATING | ERROR
	FileSystemAssociationStatus *string

	// An array containing the FileSystemAssociationStatusDetail data type, which
	// provides detailed information on file system association status.
	FileSystemAssociationStatusDetails []FileSystemAssociationStatusDetail

	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and Amazon Web Services Region.
	GatewayARN *string

	// The ARN of the backend Amazon FSx file system used for storing file data. For
	// information, see FileSystem (https://docs.aws.amazon.com/fsx/latest/APIReference/API_FileSystem.html)
	// in the Amazon FSx API Reference.
	LocationARN *string

	// A list of up to 50 tags assigned to the SMB file share, sorted alphabetically
	// by key name. Each tag is a key-value pair.
	Tags []Tag
	// contains filtered or unexported fields
}

type FileSystemAssociationStatusDetail struct {

	// The error code for a given file system association status.
	ErrorCode *string
	// contains filtered or unexported fields
}

type FileSystemAssociationSummary struct {

	// The Amazon Resource Name (ARN) of the file system association.
	FileSystemAssociationARN *string

	// The ID of the file system association.
	FileSystemAssociationId *string

	// The status of the file share. Valid Values: AVAILABLE | CREATING | DELETING |
	// FORCE_DELETING | UPDATING | ERROR
	FileSystemAssociationStatus *string

	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and Amazon Web Services Region.
	GatewayARN *string
	// contains filtered or unexported fields
}

type GatewayCapacity string

type GatewayInfo struct {

	// Date after which this gateway will not receive software updates for new
	// features and bug fixes.
	DeprecationDate *string

	// The ID of the Amazon EC2 instance that was used to launch the gateway.
	Ec2InstanceId *string

	// The Amazon Web Services Region where the Amazon EC2 instance is located.
	Ec2InstanceRegion *string

	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and Amazon Web Services Region.
	GatewayARN *string

	// The unique identifier assigned to your gateway during activation. This ID
	// becomes part of the gateway Amazon Resource Name (ARN), which you use as input
	// for other operations.
	GatewayId *string

	// The name of the gateway.
	GatewayName *string

	// The state of the gateway. Valid Values: DISABLED | ACTIVE
	GatewayOperationalState *string

	// The type of the gateway.
	GatewayType *string

	// The type of hardware or software platform on which the gateway is running.
	HostEnvironment HostEnvironment

	// A unique identifier for the specific instance of the host platform running the
	// gateway. This value is only available for certain host environments, and its
	// format depends on the host environment type.
	HostEnvironmentId *string

	// The version number of the software running on the gateway appliance.
	SoftwareVersion *string
	// contains filtered or unexported fields
}

type HostEnvironment string

type InternalServerError struct {
	Message *string

	ErrorCodeOverride *string

	Error_ *StorageGatewayError
	// contains filtered or unexported fields
}

type InvalidGatewayRequestException struct {
	Message *string

	ErrorCodeOverride *string

	Error_ *StorageGatewayError
	// contains filtered or unexported fields
}

type NFSFileShareDefaults struct {

	// The Unix directory mode in the form "nnnn". For example, 0666 represents the
	// default access mode for all directories inside the file share. The default value
	// is 0777 .
	DirectoryMode *string

	// The Unix file mode in the form "nnnn". For example, 0666 represents the default
	// file mode inside the file share. The default value is 0666 .
	FileMode *string

	// The default group ID for the file share (unless the files have another group ID
	// specified). The default value is nfsnobody .
	GroupId *int64

	// The default owner ID for files in the file share (unless the files have another
	// owner ID specified). The default value is nfsnobody .
	OwnerId *int64
	// contains filtered or unexported fields
}

type NFSFileShareInfo struct {

	// The Amazon Resource Name (ARN) of the storage used for audit logs.
	AuditDestinationARN *string

	// Specifies the Region of the S3 bucket where the NFS file share stores files.
	// This parameter is required for NFS file shares that connect to Amazon S3 through
	// a VPC endpoint, a VPC access point, or an access point alias that points to a
	// VPC access point.
	BucketRegion *string

	// Refresh cache information for the file share.
	CacheAttributes *CacheAttributes

	// The list of clients that are allowed to access the S3 File Gateway. The list
	// must contain either valid IP addresses or valid CIDR blocks.
	ClientList []string

	// The default storage class for objects put into an Amazon S3 bucket by the S3
	// File Gateway. The default value is S3_STANDARD . Optional. Valid Values:
	// S3_STANDARD | S3_INTELLIGENT_TIERING | S3_STANDARD_IA | S3_ONEZONE_IA
	DefaultStorageClass *string

	// The Amazon Resource Name (ARN) of the file share.
	FileShareARN *string

	// The ID of the file share.
	FileShareId *string

	// The name of the file share. Optional. FileShareName must be set if an S3 prefix
	// name is set in LocationARN , or if an access point or access point alias is used.
	FileShareName *string

	// The status of the file share. Valid Values: CREATING | UPDATING | AVAILABLE |
	// DELETING
	FileShareStatus *string

	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and Amazon Web Services Region.
	GatewayARN *string

	// A value that enables guessing of the MIME type for uploaded objects based on
	// file extensions. Set this value to true to enable MIME type guessing, otherwise
	// set to false . The default value is true . Valid Values: true | false
	GuessMIMETypeEnabled *bool

	// Set to true to use Amazon S3 server-side encryption with your own KMS key, or
	// false to use a key managed by Amazon S3. Optional. Valid Values: true | false
	KMSEncrypted bool

	// The Amazon Resource Name (ARN) of a symmetric customer master key (CMK) used
	// for Amazon S3 server-side encryption. Storage Gateway does not support
	// asymmetric CMKs. This value can only be set when KMSEncrypted is true . Optional.
	KMSKey *string

	// A custom ARN for the backend storage used for storing data for file shares. It
	// includes a resource ARN with an optional prefix concatenation. The prefix must
	// end with a forward slash (/). You can specify LocationARN as a bucket ARN,
	// access point ARN or access point alias, as shown in the following examples.
	// Bucket ARN: arn:aws:s3:::my-bucket/prefix/ Access point ARN:
	// arn:aws:s3:region:account-id:accesspoint/access-point-name/prefix/ If you
	// specify an access point, the bucket policy must be configured to delegate access
	// control to the access point. For information, see Delegating access control to
	// access points (https://docs.aws.amazon.com/AmazonS3/latest/userguide/access-points-policies.html#access-points-delegating-control)
	// in the Amazon S3 User Guide. Access point alias:
	// test-ap-ab123cdef4gehijklmn5opqrstuvuse1a-s3alias
	LocationARN *string

	// Describes Network File System (NFS) file share default values. Files and
	// folders stored as Amazon S3 objects in S3 buckets don't, by default, have Unix
	// file permissions assigned to them. Upon discovery in an S3 bucket by Storage
	// Gateway, the S3 objects that represent files and folders are assigned these
	// default Unix permissions. This operation is only supported for S3 File Gateways.
	NFSFileShareDefaults *NFSFileShareDefaults

	// The notification policy of the file share. SettlingTimeInSeconds controls the
	// number of seconds to wait after the last point in time a client wrote to a file
	// before generating an ObjectUploaded notification. Because clients can make many
	// small writes to files, it's best to set this parameter for as long as possible
	// to avoid generating multiple notifications for the same file in a small time
	// period. SettlingTimeInSeconds has no effect on the timing of the object
	// uploading to Amazon S3, only the timing of the notification. The following
	// example sets NotificationPolicy on with SettlingTimeInSeconds set to 60.
	// {\"Upload\": {\"SettlingTimeInSeconds\": 60}} The following example sets
	// NotificationPolicy off. {}
	NotificationPolicy *string

	// A value that sets the access control list (ACL) permission for objects in the
	// S3 bucket that an S3 File Gateway puts objects into. The default value is
	// private .
	ObjectACL ObjectACL

	// The file share path used by the NFS client to identify the mount point.
	Path *string

	// A value that sets the write status of a file share. Set this value to true to
	// set the write status to read-only, otherwise set to false . Valid Values: true
	// | false
	ReadOnly *bool

	// A value that sets who pays the cost of the request and the cost associated with
	// data download from the S3 bucket. If this value is set to true , the requester
	// pays the costs; otherwise, the S3 bucket owner pays. However, the S3 bucket
	// owner always pays the cost of storing data. RequesterPays is a configuration
	// for the S3 bucket that backs the file share, so make sure that the configuration
	// on the file share is the same as the S3 bucket configuration. Valid Values: true
	// | false
	RequesterPays *bool

	// The ARN of the IAM role that an S3 File Gateway assumes when it accesses the
	// underlying storage.
	Role *string

	// The user mapped to anonymous user. Valid options are the following:
	//   - RootSquash : Only root is mapped to anonymous user.
	//   - NoSquash : No one is mapped to anonymous user.
	//   - AllSquash : Everyone is mapped to anonymous user.
	Squash *string

	// A list of up to 50 tags assigned to the NFS file share, sorted alphabetically
	// by key name. Each tag is a key-value pair. For a gateway with more than 10 tags
	// assigned, you can view all tags using the ListTagsForResource API operation.
	Tags []Tag

	// Specifies the DNS name for the VPC endpoint that the NFS file share uses to
	// connect to Amazon S3. This parameter is required for NFS file shares that
	// connect to Amazon S3 through a VPC endpoint, a VPC access point, or an access
	// point alias that points to a VPC access point.
	VPCEndpointDNSName *string
	// contains filtered or unexported fields
}

type NetworkInterface struct {

	// The Internet Protocol version 4 (IPv4) address of the interface.
	Ipv4Address *string

	// The Internet Protocol version 6 (IPv6) address of the interface. Currently not
	// supported.
	Ipv6Address *string

	// The Media Access Control (MAC) address of the interface. This is currently
	// unsupported and will not be returned in output.
	MacAddress *string
	// contains filtered or unexported fields
}

type ObjectACL string

type PoolInfo struct {

	// The Amazon Resource Name (ARN) of the custom tape pool. Use the ListTapePools
	// operation to return a list of custom tape pools for your account and Amazon Web
	// Services Region.
	PoolARN *string

	// The name of the custom tape pool. PoolName can use all ASCII characters, except
	// '/' and '\'.
	PoolName *string

	// Status of the custom tape pool. Pool can be ACTIVE or DELETED .
	PoolStatus PoolStatus

	// Tape retention lock time is set in days. Tape retention lock can be enabled for
	// up to 100 years (36,500 days).
	RetentionLockTimeInDays *int32

	// Tape retention lock type, which can be configured in two modes. When configured
	// in governance mode, Amazon Web Services accounts with specific IAM permissions
	// are authorized to remove the tape retention lock from archived virtual tapes.
	// When configured in compliance mode, the tape retention lock cannot be removed by
	// any user, including the root Amazon Web Services account.
	RetentionLockType RetentionLockType

	// The storage class that is associated with the custom pool. When you use your
	// backup application to eject the tape, the tape is archived directly into the
	// storage class (S3 Glacier or S3 Glacier Deep Archive) that corresponds to the
	// pool.
	StorageClass TapeStorageClass
	// contains filtered or unexported fields
}

type PoolStatus string

type RetentionLockType string

type SMBFileShareInfo struct {

	// Indicates whether AccessBasedEnumeration is enabled.
	AccessBasedEnumeration *bool

	// A list of users or groups in the Active Directory that have administrator
	// rights to the file share. A group must be prefixed with the @ character.
	// Acceptable formats include: DOMAIN\User1 , user1 , @group1 , and @DOMAIN\group1
	// . Can only be set if Authentication is set to ActiveDirectory .
	AdminUserList []string

	// The Amazon Resource Name (ARN) of the storage used for audit logs.
	AuditDestinationARN *string

	// The authentication method of the file share. The default is ActiveDirectory .
	// Valid Values: ActiveDirectory | GuestAccess
	Authentication *string

	// Specifies the Region of the S3 bucket where the SMB file share stores files.
	// This parameter is required for SMB file shares that connect to Amazon S3 through
	// a VPC endpoint, a VPC access point, or an access point alias that points to a
	// VPC access point.
	BucketRegion *string

	// Refresh cache information for the file share.
	CacheAttributes *CacheAttributes

	// The case of an object name in an Amazon S3 bucket. For ClientSpecified , the
	// client determines the case sensitivity. For CaseSensitive , the gateway
	// determines the case sensitivity. The default value is ClientSpecified .
	CaseSensitivity CaseSensitivity

	// The default storage class for objects put into an Amazon S3 bucket by the S3
	// File Gateway. The default value is S3_STANDARD . Optional. Valid Values:
	// S3_STANDARD | S3_INTELLIGENT_TIERING | S3_STANDARD_IA | S3_ONEZONE_IA
	DefaultStorageClass *string

	// The Amazon Resource Name (ARN) of the file share.
	FileShareARN *string

	// The ID of the file share.
	FileShareId *string

	// The name of the file share. Optional. FileShareName must be set if an S3 prefix
	// name is set in LocationARN , or if an access point or access point alias is used.
	FileShareName *string

	// The status of the file share. Valid Values: CREATING | UPDATING | AVAILABLE |
	// DELETING
	FileShareStatus *string

	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and Amazon Web Services Region.
	GatewayARN *string

	// A value that enables guessing of the MIME type for uploaded objects based on
	// file extensions. Set this value to true to enable MIME type guessing, otherwise
	// set to false . The default value is true . Valid Values: true | false
	GuessMIMETypeEnabled *bool

	// A list of users or groups in the Active Directory that are not allowed to
	// access the file share. A group must be prefixed with the @ character. Acceptable
	// formats include: DOMAIN\User1 , user1 , @group1 , and @DOMAIN\group1 . Can only
	// be set if Authentication is set to ActiveDirectory .
	InvalidUserList []string

	// Set to true to use Amazon S3 server-side encryption with your own KMS key, or
	// false to use a key managed by Amazon S3. Optional. Valid Values: true | false
	KMSEncrypted bool

	// The Amazon Resource Name (ARN) of a symmetric customer master key (CMK) used
	// for Amazon S3 server-side encryption. Storage Gateway does not support
	// asymmetric CMKs. This value can only be set when KMSEncrypted is true . Optional.
	KMSKey *string

	// A custom ARN for the backend storage used for storing data for file shares. It
	// includes a resource ARN with an optional prefix concatenation. The prefix must
	// end with a forward slash (/). You can specify LocationARN as a bucket ARN,
	// access point ARN or access point alias, as shown in the following examples.
	// Bucket ARN: arn:aws:s3:::my-bucket/prefix/ Access point ARN:
	// arn:aws:s3:region:account-id:accesspoint/access-point-name/prefix/ If you
	// specify an access point, the bucket policy must be configured to delegate access
	// control to the access point. For information, see Delegating access control to
	// access points (https://docs.aws.amazon.com/AmazonS3/latest/userguide/access-points-policies.html#access-points-delegating-control)
	// in the Amazon S3 User Guide. Access point alias:
	// test-ap-ab123cdef4gehijklmn5opqrstuvuse1a-s3alias
	LocationARN *string

	// The notification policy of the file share. SettlingTimeInSeconds controls the
	// number of seconds to wait after the last point in time a client wrote to a file
	// before generating an ObjectUploaded notification. Because clients can make many
	// small writes to files, it's best to set this parameter for as long as possible
	// to avoid generating multiple notifications for the same file in a small time
	// period. SettlingTimeInSeconds has no effect on the timing of the object
	// uploading to Amazon S3, only the timing of the notification. The following
	// example sets NotificationPolicy on with SettlingTimeInSeconds set to 60.
	// {\"Upload\": {\"SettlingTimeInSeconds\": 60}} The following example sets
	// NotificationPolicy off. {}
	NotificationPolicy *string

	// A value that sets the access control list (ACL) permission for objects in the
	// S3 bucket that an S3 File Gateway puts objects into. The default value is
	// private .
	ObjectACL ObjectACL

	// Specifies whether opportunistic locking is enabled for the SMB file share.
	// Enabling opportunistic locking on case-sensitive shares is not recommended for
	// workloads that involve access to files with the same name in different case.
	// Valid Values: true | false
	OplocksEnabled *bool

	// The file share path used by the SMB client to identify the mount point.
	Path *string

	// A value that sets the write status of a file share. Set this value to true to
	// set the write status to read-only, otherwise set to false . Valid Values: true
	// | false
	ReadOnly *bool

	// A value that sets who pays the cost of the request and the cost associated with
	// data download from the S3 bucket. If this value is set to true , the requester
	// pays the costs; otherwise, the S3 bucket owner pays. However, the S3 bucket
	// owner always pays the cost of storing data. RequesterPays is a configuration
	// for the S3 bucket that backs the file share, so make sure that the configuration
	// on the file share is the same as the S3 bucket configuration. Valid Values: true
	// | false
	RequesterPays *bool

	// The ARN of the IAM role that an S3 File Gateway assumes when it accesses the
	// underlying storage.
	Role *string

	// If this value is set to true , it indicates that access control list (ACL) is
	// enabled on the SMB file share. If it is set to false , it indicates that file
	// and directory permissions are mapped to the POSIX permission. For more
	// information, see Using Microsoft Windows ACLs to control access to an SMB file
	// share (https://docs.aws.amazon.com/storagegateway/latest/userguide/smb-acl.html)
	// in the Storage Gateway User Guide.
	SMBACLEnabled *bool

	// A list of up to 50 tags assigned to the SMB file share, sorted alphabetically
	// by key name. Each tag is a key-value pair. For a gateway with more than 10 tags
	// assigned, you can view all tags using the ListTagsForResource API operation.
	Tags []Tag

	// Specifies the DNS name for the VPC endpoint that the SMB file share uses to
	// connect to Amazon S3. This parameter is required for SMB file shares that
	// connect to Amazon S3 through a VPC endpoint, a VPC access point, or an access
	// point alias that points to a VPC access point.
	VPCEndpointDNSName *string

	// A list of users or groups in the Active Directory that are allowed to access
	// the file share. A group must be prefixed with the @ character. Acceptable
	// formats include: DOMAIN\User1 , user1 , @group1 , and @DOMAIN\group1 . Can only
	// be set if Authentication is set to ActiveDirectory .
	ValidUserList []string
	// contains filtered or unexported fields
}

type SMBLocalGroups struct {

	// A list of Active Directory users and groups that have local Gateway Admin
	// permissions. Acceptable formats include: DOMAIN\User1 , user1 , DOMAIN\group1 ,
	// and group1 . Gateway Admins can use the Shared Folders Microsoft Management
	// Console snap-in to force-close files that are open and locked.
	GatewayAdmins []string
	// contains filtered or unexported fields
}

type SMBSecurityStrategy string

type ServiceUnavailableError struct {
	Message *string

	ErrorCodeOverride *string

	Error_ *StorageGatewayError
	// contains filtered or unexported fields
}

type StorageGatewayError struct {

	// Additional information about the error.
	ErrorCode ErrorCode

	// Human-readable text that provides detail about the error that occurred.
	ErrorDetails map[string]string
	// contains filtered or unexported fields
}

type StorediSCSIVolume struct {

	// The date the volume was created. Volumes created prior to March 28, 2017 don’t
	// have this timestamp.
	CreatedDate *time.Time

	// The Amazon Resource Name (ARN) of a symmetric customer master key (CMK) used
	// for Amazon S3 server-side encryption. Storage Gateway does not support
	// asymmetric CMKs. This value can only be set when KMSEncrypted is true . Optional.
	KMSKey *string

	// Indicates if when the stored volume was created, existing data on the
	// underlying local disk was preserved. Valid Values: true | false
	PreservedExistingData bool

	// If the stored volume was created from a snapshot, this field contains the
	// snapshot ID used, e.g. snap-78e22663. Otherwise, this field is not included.
	SourceSnapshotId *string

	// The name of the iSCSI target used by an initiator to connect to a volume and
	// used as a suffix for the target ARN. For example, specifying TargetName as
	// myvolume results in the target ARN of
	// arn:aws:storagegateway:us-east-2:111122223333:gateway/sgw-12A3456B/target/iqn.1997-05.com.amazon:myvolume
	// . The target name must be unique across all volumes on a gateway. If you don't
	// specify a value, Storage Gateway uses the value that was previously used for
	// this volume as the new target name.
	TargetName *string

	// The Amazon Resource Name (ARN) of the storage volume.
	VolumeARN *string

	// A value that indicates whether a storage volume is attached to, detached from,
	// or is in the process of detaching from a gateway. For more information, see
	// Moving your volumes to a different gateway (https://docs.aws.amazon.com/storagegateway/latest/userguide/managing-volumes.html#attach-detach-volume)
	// .
	VolumeAttachmentStatus *string

	// The ID of the local disk that was specified in the CreateStorediSCSIVolume
	// operation.
	VolumeDiskId *string

	// The unique identifier of the volume, e.g., vol-AE4B946D.
	VolumeId *string

	// Represents the percentage complete if the volume is restoring or bootstrapping
	// that represents the percent of data transferred. This field does not appear in
	// the response if the stored volume is not restoring or bootstrapping.
	VolumeProgress *float64

	// The size of the volume in bytes.
	VolumeSizeInBytes int64

	// One of the VolumeStatus values that indicates the state of the storage volume.
	VolumeStatus *string

	// One of the VolumeType enumeration values describing the type of the volume.
	VolumeType *string

	// The size of the data stored on the volume in bytes. This value is calculated
	// based on the number of blocks that are touched, instead of the actual amount of
	// data written. This value can be useful for sequential write patterns but less
	// accurate for random write patterns. VolumeUsedInBytes is different from the
	// compressed size of the volume, which is the value that is used to calculate your
	// bill. This value is not available for volumes created prior to May 13, 2015,
	// until you store data on the volume.
	VolumeUsedInBytes *int64

	// An VolumeiSCSIAttributes object that represents a collection of iSCSI
	// attributes for one stored volume.
	VolumeiSCSIAttributes *VolumeiSCSIAttributes
	// contains filtered or unexported fields
}

type Tag struct {

	// Tag key. The key can't start with aws:.
	//
	// This member is required.
	Key *string

	// Value of the tag key.
	//
	// This member is required.
	Value *string
	// contains filtered or unexported fields
}

type Tape struct {

	// The Amazon Resource Name (ARN) of a symmetric customer master key (CMK) used
	// for Amazon S3 server-side encryption. Storage Gateway does not support
	// asymmetric CMKs. This value can only be set when KMSEncrypted is true . Optional.
	KMSKey *string

	// The date that the tape enters a custom tape pool.
	PoolEntryDate *time.Time

	// The ID of the pool that contains tapes that will be archived. The tapes in this
	// pool are archived in the S3 storage class that is associated with the pool. When
	// you use your backup application to eject the tape, the tape is archived directly
	// into the storage class (S3 Glacier or S3 Glacier Deep Archive) that corresponds
	// to the pool.
	PoolId *string

	// For archiving virtual tapes, indicates how much data remains to be uploaded
	// before archiving is complete. Range: 0 (not started) to 100 (complete).
	Progress *float64

	// The date that the tape is first archived with tape retention lock enabled.
	RetentionStartDate *time.Time

	// The Amazon Resource Name (ARN) of the virtual tape.
	TapeARN *string

	// The barcode that identifies a specific virtual tape.
	TapeBarcode *string

	// The date the virtual tape was created.
	TapeCreatedDate *time.Time

	// The size, in bytes, of the virtual tape capacity.
	TapeSizeInBytes *int64

	// The current state of the virtual tape.
	TapeStatus *string

	// The size, in bytes, of data stored on the virtual tape. This value is not
	// available for tapes created prior to May 13, 2015.
	TapeUsedInBytes *int64

	// The virtual tape library (VTL) device that the virtual tape is associated with.
	VTLDevice *string

	// If the tape is archived as write-once-read-many (WORM), this value is true .
	Worm bool
	// contains filtered or unexported fields
}

type TapeArchive struct {

	// The time that the archiving of the virtual tape was completed. The default
	// timestamp format is in the ISO8601 extended YYYY-MM-DD'T'HH:MM:SS'Z' format.
	CompletionTime *time.Time

	// The Amazon Resource Name (ARN) of a symmetric customer master key (CMK) used
	// for Amazon S3 server-side encryption. Storage Gateway does not support
	// asymmetric CMKs. This value can only be set when KMSEncrypted is true . Optional.
	KMSKey *string

	// The time that the tape entered the custom tape pool. The default timestamp
	// format is in the ISO8601 extended YYYY-MM-DD'T'HH:MM:SS'Z' format.
	PoolEntryDate *time.Time

	// The ID of the pool that was used to archive the tape. The tapes in this pool
	// are archived in the S3 storage class that is associated with the pool.
	PoolId *string

	// If the archived tape is subject to tape retention lock, the date that the
	// archived tape started being retained.
	RetentionStartDate *time.Time

	// The Amazon Resource Name (ARN) of the tape gateway that the virtual tape is
	// being retrieved to. The virtual tape is retrieved from the virtual tape shelf
	// (VTS).
	RetrievedTo *string

	// The Amazon Resource Name (ARN) of an archived virtual tape.
	TapeARN *string

	// The barcode that identifies the archived virtual tape.
	TapeBarcode *string

	// The date the virtual tape was created.
	TapeCreatedDate *time.Time

	// The size, in bytes, of the archived virtual tape.
	TapeSizeInBytes *int64

	// The current state of the archived virtual tape.
	TapeStatus *string

	// The size, in bytes, of data stored on the virtual tape. This value is not
	// available for tapes created prior to May 13, 2015.
	TapeUsedInBytes *int64

	// Set to true if the archived tape is stored as write-once-read-many (WORM).
	Worm bool
	// contains filtered or unexported fields
}

type TapeInfo struct {

	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and Amazon Web Services Region.
	GatewayARN *string

	// The date that the tape entered the custom tape pool with tape retention lock
	// enabled.
	PoolEntryDate *time.Time

	// The ID of the pool that you want to add your tape to for archiving. The tape in
	// this pool is archived in the S3 storage class that is associated with the pool.
	// When you use your backup application to eject the tape, the tape is archived
	// directly into the storage class (S3 Glacier or S3 Glacier Deep Archive) that
	// corresponds to the pool.
	PoolId *string

	// The date that the tape became subject to tape retention lock.
	RetentionStartDate *time.Time

	// The Amazon Resource Name (ARN) of a virtual tape.
	TapeARN *string

	// The barcode that identifies a specific virtual tape.
	TapeBarcode *string

	// The size, in bytes, of a virtual tape.
	TapeSizeInBytes *int64

	// The status of the tape.
	TapeStatus *string
	// contains filtered or unexported fields
}

type TapeRecoveryPointInfo struct {

	// The Amazon Resource Name (ARN) of the virtual tape.
	TapeARN *string

	// The time when the point-in-time view of the virtual tape was replicated for
	// later recovery. The default timestamp format of the tape recovery point time is
	// in the ISO8601 extended YYYY-MM-DD'T'HH:MM:SS'Z' format.
	TapeRecoveryPointTime *time.Time

	// The size, in bytes, of the virtual tapes to recover.
	TapeSizeInBytes *int64

	// The status of the virtual tapes.
	TapeStatus *string
	// contains filtered or unexported fields
}

type TapeStorageClass string

type VTLDevice struct {

	// A list of iSCSI information about a VTL device.
	DeviceiSCSIAttributes *DeviceiSCSIAttributes

	// Specifies the unique Amazon Resource Name (ARN) of the device (tape drive or
	// media changer).
	VTLDeviceARN *string

	// Specifies the model number of device that the VTL device emulates.
	VTLDeviceProductIdentifier *string

	// Specifies the type of device that the VTL device emulates.
	VTLDeviceType *string

	// Specifies the vendor of the device that the VTL device object emulates.
	VTLDeviceVendor *string
	// contains filtered or unexported fields
}

type VolumeInfo struct {

	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and Amazon Web Services Region.
	GatewayARN *string

	// The unique identifier assigned to your gateway during activation. This ID
	// becomes part of the gateway Amazon Resource Name (ARN), which you use as input
	// for other operations. Valid Values: 50 to 500 lowercase letters, numbers,
	// periods (.), and hyphens (-).
	GatewayId *string

	// The Amazon Resource Name (ARN) for the storage volume. For example, the
	// following is a valid ARN:
	// arn:aws:storagegateway:us-east-2:111122223333:gateway/sgw-12A3456B/volume/vol-1122AABB
	// Valid Values: 50 to 500 lowercase letters, numbers, periods (.), and hyphens
	// (-).
	VolumeARN *string

	// One of the VolumeStatus values that indicates the state of the storage volume.
	VolumeAttachmentStatus *string

	// The unique identifier assigned to the volume. This ID becomes part of the
	// volume Amazon Resource Name (ARN), which you use as input for other operations.
	// Valid Values: 50 to 500 lowercase letters, numbers, periods (.), and hyphens
	// (-).
	VolumeId *string

	// The size of the volume in bytes. Valid Values: 50 to 500 lowercase letters,
	// numbers, periods (.), and hyphens (-).
	VolumeSizeInBytes int64

	// One of the VolumeType enumeration values describing the type of the volume.
	VolumeType *string
	// contains filtered or unexported fields
}

type VolumeRecoveryPointInfo struct {

	// The Amazon Resource Name (ARN) of the volume target.
	VolumeARN *string

	// The time the recovery point was taken.
	VolumeRecoveryPointTime *string

	// The size of the volume in bytes.
	VolumeSizeInBytes int64

	// The size of the data stored on the volume in bytes. This value is not available
	// for volumes created prior to May 13, 2015, until you store data on the volume.
	VolumeUsageInBytes int64
	// contains filtered or unexported fields
}

type VolumeiSCSIAttributes struct {

	// Indicates whether mutual CHAP is enabled for the iSCSI target.
	ChapEnabled bool

	// The logical disk number.
	LunNumber *int32

	// The network interface identifier.
	NetworkInterfaceId *string

	// The port used to communicate with iSCSI targets.
	NetworkInterfacePort int32

	// The Amazon Resource Name (ARN) of the volume target.
	TargetARN *string
	// contains filtered or unexported fields
}