appintegrationsservice

func (*AccessDeniedException) Code ¶

func (s *AccessDeniedException) Code() string

Code returns the exception type name.

func (*AccessDeniedException) Error ¶

func (s *AccessDeniedException) Error() string

func (AccessDeniedException) GoString ¶

func (s AccessDeniedException) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*AccessDeniedException) Message ¶

func (s *AccessDeniedException) Message() string

Message returns the exception's message.

func (*AccessDeniedException) OrigErr ¶

func (s *AccessDeniedException) OrigErr() error

OrigErr always returns nil, satisfies awserr.Error interface.

func (*AccessDeniedException) RequestID ¶

func (s *AccessDeniedException) RequestID() string

RequestID returns the service's response RequestID for request.

func (*AccessDeniedException) StatusCode ¶

func (s *AccessDeniedException) StatusCode() int

Status code returns the HTTP status code for the request's response error.

func (AccessDeniedException) String ¶

func (s AccessDeniedException) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*AppIntegrationsService) CreateApplication ¶ added in v1.45.17

func (c *AppIntegrationsService) CreateApplication(input *CreateApplicationInput) (*CreateApplicationOutput, error)

CreateApplication API operation for Amazon AppIntegrations Service.

This API is in preview release and subject to change.

Creates and persists an Application resource.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon AppIntegrations Service's API operation CreateApplication for usage and error information.

Returned Error Types:

• InternalServiceError Request processing failed due to an error or failure with the service.

• ResourceQuotaExceededException The allowed quota for the resource has been exceeded.

• DuplicateResourceException A resource with the specified name already exists.

• ThrottlingException The throttling limit has been exceeded.

• InvalidRequestException The request is not valid.

• AccessDeniedException You do not have sufficient access to perform this action.

• UnsupportedOperationException The operation is not supported.

See also, https://docs.aws.amazon.com/goto/WebAPI/appintegrations-2020-07-29/CreateApplication

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/appintegrationsservice"
)

func main() {
	svc := appintegrationsservice.New(session.New())
	input := &appintegrationsservice.CreateApplicationInput{
		ApplicationSourceConfig: &appintegrationsservice.ApplicationSourceConfig{
			ExternalUrlConfig: &appintegrationsservice.ExternalUrlConfig{
				AccessUrl: aws.String("https://example.com"),
			},
		},
		Description: aws.String("My first application."),
		Name:        aws.String("My Application"),
		Namespace:   aws.String("myapplication"),
	}

	result, err := svc.CreateApplication(input)
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case appintegrationsservice.ErrCodeInternalServiceError:
				fmt.Println(appintegrationsservice.ErrCodeInternalServiceError, aerr.Error())
			case appintegrationsservice.ErrCodeResourceQuotaExceededException:
				fmt.Println(appintegrationsservice.ErrCodeResourceQuotaExceededException, aerr.Error())
			case appintegrationsservice.ErrCodeDuplicateResourceException:
				fmt.Println(appintegrationsservice.ErrCodeDuplicateResourceException, aerr.Error())
			case appintegrationsservice.ErrCodeThrottlingException:
				fmt.Println(appintegrationsservice.ErrCodeThrottlingException, aerr.Error())
			case appintegrationsservice.ErrCodeInvalidRequestException:
				fmt.Println(appintegrationsservice.ErrCodeInvalidRequestException, aerr.Error())
			case appintegrationsservice.ErrCodeAccessDeniedException:
				fmt.Println(appintegrationsservice.ErrCodeAccessDeniedException, aerr.Error())
			case appintegrationsservice.ErrCodeUnsupportedOperationException:
				fmt.Println(appintegrationsservice.ErrCodeUnsupportedOperationException, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}

Output:

func (*AppIntegrationsService) CreateApplicationRequest ¶ added in v1.45.17

func (c *AppIntegrationsService) CreateApplicationRequest(input *CreateApplicationInput) (req *request.Request, output *CreateApplicationOutput)

CreateApplicationRequest generates a "aws/request.Request" representing the client's request for the CreateApplication operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See CreateApplication for more information on using the CreateApplication API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the CreateApplicationRequest method.
req, resp := client.CreateApplicationRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/appintegrations-2020-07-29/CreateApplication

func (*AppIntegrationsService) CreateApplicationWithContext ¶ added in v1.45.17

func (c *AppIntegrationsService) CreateApplicationWithContext(ctx aws.Context, input *CreateApplicationInput, opts ...request.Option) (*CreateApplicationOutput, error)

CreateApplicationWithContext is the same as CreateApplication with the addition of the ability to pass a context and additional request options.

See CreateApplication for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*AppIntegrationsService) CreateDataIntegration ¶ added in v1.40.50

func (c *AppIntegrationsService) CreateDataIntegration(input *CreateDataIntegrationInput) (*CreateDataIntegrationOutput, error)

CreateDataIntegration API operation for Amazon AppIntegrations Service.

Creates and persists a DataIntegration resource.

You cannot create a DataIntegration association for a DataIntegration that has been previously associated. Use a different DataIntegration, or recreate the DataIntegration using the CreateDataIntegration API.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon AppIntegrations Service's API operation CreateDataIntegration for usage and error information.

Returned Error Types:

• InternalServiceError Request processing failed due to an error or failure with the service.

• ResourceQuotaExceededException The allowed quota for the resource has been exceeded.

• DuplicateResourceException A resource with the specified name already exists.

• ThrottlingException The throttling limit has been exceeded.

• InvalidRequestException The request is not valid.

• AccessDeniedException You do not have sufficient access to perform this action.

See also, https://docs.aws.amazon.com/goto/WebAPI/appintegrations-2020-07-29/CreateDataIntegration

func (*AppIntegrationsService) CreateDataIntegrationRequest ¶ added in v1.40.50

func (c *AppIntegrationsService) CreateDataIntegrationRequest(input *CreateDataIntegrationInput) (req *request.Request, output *CreateDataIntegrationOutput)

CreateDataIntegrationRequest generates a "aws/request.Request" representing the client's request for the CreateDataIntegration operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See CreateDataIntegration for more information on using the CreateDataIntegration API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the CreateDataIntegrationRequest method.
req, resp := client.CreateDataIntegrationRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/appintegrations-2020-07-29/CreateDataIntegration

func (*AppIntegrationsService) CreateDataIntegrationWithContext ¶ added in v1.40.50

func (c *AppIntegrationsService) CreateDataIntegrationWithContext(ctx aws.Context, input *CreateDataIntegrationInput, opts ...request.Option) (*CreateDataIntegrationOutput, error)

CreateDataIntegrationWithContext is the same as CreateDataIntegration with the addition of the ability to pass a context and additional request options.

See CreateDataIntegration for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*AppIntegrationsService) CreateEventIntegration ¶

func (c *AppIntegrationsService) CreateEventIntegration(input *CreateEventIntegrationInput) (*CreateEventIntegrationOutput, error)

CreateEventIntegration API operation for Amazon AppIntegrations Service.

Creates an EventIntegration, given a specified name, description, and a reference to an Amazon EventBridge bus in your account and a partner event source that pushes events to that bus. No objects are created in the your account, only metadata that is persisted on the EventIntegration control plane.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon AppIntegrations Service's API operation CreateEventIntegration for usage and error information.

Returned Error Types:

• InternalServiceError Request processing failed due to an error or failure with the service.

• ResourceQuotaExceededException The allowed quota for the resource has been exceeded.

• DuplicateResourceException A resource with the specified name already exists.

• ThrottlingException The throttling limit has been exceeded.

• InvalidRequestException The request is not valid.

• AccessDeniedException You do not have sufficient access to perform this action.

See also, https://docs.aws.amazon.com/goto/WebAPI/appintegrations-2020-07-29/CreateEventIntegration

func (*AppIntegrationsService) CreateEventIntegrationRequest ¶

func (c *AppIntegrationsService) CreateEventIntegrationRequest(input *CreateEventIntegrationInput) (req *request.Request, output *CreateEventIntegrationOutput)

CreateEventIntegrationRequest generates a "aws/request.Request" representing the client's request for the CreateEventIntegration operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See CreateEventIntegration for more information on using the CreateEventIntegration API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the CreateEventIntegrationRequest method.
req, resp := client.CreateEventIntegrationRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/appintegrations-2020-07-29/CreateEventIntegration

func (*AppIntegrationsService) CreateEventIntegrationWithContext ¶

func (c *AppIntegrationsService) CreateEventIntegrationWithContext(ctx aws.Context, input *CreateEventIntegrationInput, opts ...request.Option) (*CreateEventIntegrationOutput, error)

CreateEventIntegrationWithContext is the same as CreateEventIntegration with the addition of the ability to pass a context and additional request options.

See CreateEventIntegration for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*AppIntegrationsService) DeleteApplication ¶ added in v1.49.8

func (c *AppIntegrationsService) DeleteApplication(input *DeleteApplicationInput) (*DeleteApplicationOutput, error)

DeleteApplication API operation for Amazon AppIntegrations Service.

Deletes the Application. Only Applications that don't have any Application Associations can be deleted.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon AppIntegrations Service's API operation DeleteApplication for usage and error information.

Returned Error Types:

• InternalServiceError Request processing failed due to an error or failure with the service.

• ThrottlingException The throttling limit has been exceeded.

• ResourceNotFoundException The specified resource was not found.

• InvalidRequestException The request is not valid.

• AccessDeniedException You do not have sufficient access to perform this action.

See also, https://docs.aws.amazon.com/goto/WebAPI/appintegrations-2020-07-29/DeleteApplication

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/appintegrationsservice"
)

func main() {
	svc := appintegrationsservice.New(session.New())
	input := &appintegrationsservice.DeleteApplicationInput{
		Arn: aws.String("arn:aws:app-integrations:us-west-2:0123456789012:application/98542c53-e8ac-4570-9c85-c6552c8d9c5e"),
	}

	result, err := svc.DeleteApplication(input)
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case appintegrationsservice.ErrCodeInternalServiceError:
				fmt.Println(appintegrationsservice.ErrCodeInternalServiceError, aerr.Error())
			case appintegrationsservice.ErrCodeThrottlingException:
				fmt.Println(appintegrationsservice.ErrCodeThrottlingException, aerr.Error())
			case appintegrationsservice.ErrCodeResourceNotFoundException:
				fmt.Println(appintegrationsservice.ErrCodeResourceNotFoundException, aerr.Error())
			case appintegrationsservice.ErrCodeInvalidRequestException:
				fmt.Println(appintegrationsservice.ErrCodeInvalidRequestException, aerr.Error())
			case appintegrationsservice.ErrCodeAccessDeniedException:
				fmt.Println(appintegrationsservice.ErrCodeAccessDeniedException, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}

Output:

func (*AppIntegrationsService) DeleteApplicationRequest ¶ added in v1.49.8

func (c *AppIntegrationsService) DeleteApplicationRequest(input *DeleteApplicationInput) (req *request.Request, output *DeleteApplicationOutput)

DeleteApplicationRequest generates a "aws/request.Request" representing the client's request for the DeleteApplication operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DeleteApplication for more information on using the DeleteApplication API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DeleteApplicationRequest method.
req, resp := client.DeleteApplicationRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/appintegrations-2020-07-29/DeleteApplication

func (*AppIntegrationsService) DeleteApplicationWithContext ¶ added in v1.49.8

func (c *AppIntegrationsService) DeleteApplicationWithContext(ctx aws.Context, input *DeleteApplicationInput, opts ...request.Option) (*DeleteApplicationOutput, error)

DeleteApplicationWithContext is the same as DeleteApplication with the addition of the ability to pass a context and additional request options.

See DeleteApplication for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*AppIntegrationsService) DeleteDataIntegration ¶ added in v1.40.50

func (c *AppIntegrationsService) DeleteDataIntegration(input *DeleteDataIntegrationInput) (*DeleteDataIntegrationOutput, error)

DeleteDataIntegration API operation for Amazon AppIntegrations Service.

Deletes the DataIntegration. Only DataIntegrations that don't have any DataIntegrationAssociations can be deleted. Deleting a DataIntegration also deletes the underlying Amazon AppFlow flow and service linked role.

You cannot create a DataIntegration association for a DataIntegration that has been previously associated. Use a different DataIntegration, or recreate the DataIntegration using the CreateDataIntegration (https://docs.aws.amazon.com/appintegrations/latest/APIReference/API_CreateDataIntegration.html) API.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon AppIntegrations Service's API operation DeleteDataIntegration for usage and error information.

Returned Error Types:

• InternalServiceError Request processing failed due to an error or failure with the service.

• ThrottlingException The throttling limit has been exceeded.

• ResourceNotFoundException The specified resource was not found.

• InvalidRequestException The request is not valid.

• AccessDeniedException You do not have sufficient access to perform this action.

See also, https://docs.aws.amazon.com/goto/WebAPI/appintegrations-2020-07-29/DeleteDataIntegration

func (*AppIntegrationsService) DeleteDataIntegrationRequest ¶ added in v1.40.50

func (c *AppIntegrationsService) DeleteDataIntegrationRequest(input *DeleteDataIntegrationInput) (req *request.Request, output *DeleteDataIntegrationOutput)

DeleteDataIntegrationRequest generates a "aws/request.Request" representing the client's request for the DeleteDataIntegration operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DeleteDataIntegration for more information on using the DeleteDataIntegration API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DeleteDataIntegrationRequest method.
req, resp := client.DeleteDataIntegrationRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/appintegrations-2020-07-29/DeleteDataIntegration

func (*AppIntegrationsService) DeleteDataIntegrationWithContext ¶ added in v1.40.50

func (c *AppIntegrationsService) DeleteDataIntegrationWithContext(ctx aws.Context, input *DeleteDataIntegrationInput, opts ...request.Option) (*DeleteDataIntegrationOutput, error)

DeleteDataIntegrationWithContext is the same as DeleteDataIntegration with the addition of the ability to pass a context and additional request options.

See DeleteDataIntegration for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*AppIntegrationsService) DeleteEventIntegration ¶

func (c *AppIntegrationsService) DeleteEventIntegration(input *DeleteEventIntegrationInput) (*DeleteEventIntegrationOutput, error)

DeleteEventIntegration API operation for Amazon AppIntegrations Service.

Deletes the specified existing event integration. If the event integration is associated with clients, the request is rejected.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon AppIntegrations Service's API operation DeleteEventIntegration for usage and error information.

Returned Error Types:

• InternalServiceError Request processing failed due to an error or failure with the service.

• ThrottlingException The throttling limit has been exceeded.

• ResourceNotFoundException The specified resource was not found.

• InvalidRequestException The request is not valid.

• AccessDeniedException You do not have sufficient access to perform this action.

See also, https://docs.aws.amazon.com/goto/WebAPI/appintegrations-2020-07-29/DeleteEventIntegration

func (*AppIntegrationsService) DeleteEventIntegrationRequest ¶

func (c *AppIntegrationsService) DeleteEventIntegrationRequest(input *DeleteEventIntegrationInput) (req *request.Request, output *DeleteEventIntegrationOutput)

DeleteEventIntegrationRequest generates a "aws/request.Request" representing the client's request for the DeleteEventIntegration operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DeleteEventIntegration for more information on using the DeleteEventIntegration API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DeleteEventIntegrationRequest method.
req, resp := client.DeleteEventIntegrationRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/appintegrations-2020-07-29/DeleteEventIntegration

func (*AppIntegrationsService) DeleteEventIntegrationWithContext ¶

func (c *AppIntegrationsService) DeleteEventIntegrationWithContext(ctx aws.Context, input *DeleteEventIntegrationInput, opts ...request.Option) (*DeleteEventIntegrationOutput, error)

DeleteEventIntegrationWithContext is the same as DeleteEventIntegration with the addition of the ability to pass a context and additional request options.

See DeleteEventIntegration for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*AppIntegrationsService) GetApplication ¶ added in v1.45.17

func (c *AppIntegrationsService) GetApplication(input *GetApplicationInput) (*GetApplicationOutput, error)

GetApplication API operation for Amazon AppIntegrations Service.

This API is in preview release and subject to change.

Get an Application resource.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon AppIntegrations Service's API operation GetApplication for usage and error information.

Returned Error Types:

• InternalServiceError Request processing failed due to an error or failure with the service.

• ThrottlingException The throttling limit has been exceeded.

• ResourceNotFoundException The specified resource was not found.

• InvalidRequestException The request is not valid.

• AccessDeniedException You do not have sufficient access to perform this action.

See also, https://docs.aws.amazon.com/goto/WebAPI/appintegrations-2020-07-29/GetApplication

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/appintegrationsservice"
)

func main() {
	svc := appintegrationsservice.New(session.New())
	input := &appintegrationsservice.GetApplicationInput{
		Arn: aws.String("arn:aws:app-integrations:us-west-2:0123456789012:application/98542c53-e8ac-4570-9c85-c6552c8d9c5e"),
	}

	result, err := svc.GetApplication(input)
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case appintegrationsservice.ErrCodeInternalServiceError:
				fmt.Println(appintegrationsservice.ErrCodeInternalServiceError, aerr.Error())
			case appintegrationsservice.ErrCodeThrottlingException:
				fmt.Println(appintegrationsservice.ErrCodeThrottlingException, aerr.Error())
			case appintegrationsservice.ErrCodeResourceNotFoundException:
				fmt.Println(appintegrationsservice.ErrCodeResourceNotFoundException, aerr.Error())
			case appintegrationsservice.ErrCodeInvalidRequestException:
				fmt.Println(appintegrationsservice.ErrCodeInvalidRequestException, aerr.Error())
			case appintegrationsservice.ErrCodeAccessDeniedException:
				fmt.Println(appintegrationsservice.ErrCodeAccessDeniedException, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}

Output:

func (*AppIntegrationsService) GetApplicationRequest ¶ added in v1.45.17

func (c *AppIntegrationsService) GetApplicationRequest(input *GetApplicationInput) (req *request.Request, output *GetApplicationOutput)

GetApplicationRequest generates a "aws/request.Request" representing the client's request for the GetApplication operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See GetApplication for more information on using the GetApplication API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the GetApplicationRequest method.
req, resp := client.GetApplicationRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/appintegrations-2020-07-29/GetApplication

func (*AppIntegrationsService) GetApplicationWithContext ¶ added in v1.45.17

func (c *AppIntegrationsService) GetApplicationWithContext(ctx aws.Context, input *GetApplicationInput, opts ...request.Option) (*GetApplicationOutput, error)

GetApplicationWithContext is the same as GetApplication with the addition of the ability to pass a context and additional request options.

See GetApplication for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*AppIntegrationsService) GetDataIntegration ¶ added in v1.40.50

func (c *AppIntegrationsService) GetDataIntegration(input *GetDataIntegrationInput) (*GetDataIntegrationOutput, error)

GetDataIntegration API operation for Amazon AppIntegrations Service.

Returns information about the DataIntegration.

You cannot create a DataIntegration association for a DataIntegration that has been previously associated. Use a different DataIntegration, or recreate the DataIntegration using the CreateDataIntegration (https://docs.aws.amazon.com/appintegrations/latest/APIReference/API_CreateDataIntegration.html) API.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon AppIntegrations Service's API operation GetDataIntegration for usage and error information.

Returned Error Types:

• InternalServiceError Request processing failed due to an error or failure with the service.

• ThrottlingException The throttling limit has been exceeded.

• ResourceNotFoundException The specified resource was not found.

• InvalidRequestException The request is not valid.

• AccessDeniedException You do not have sufficient access to perform this action.

See also, https://docs.aws.amazon.com/goto/WebAPI/appintegrations-2020-07-29/GetDataIntegration

func (*AppIntegrationsService) GetDataIntegrationRequest ¶ added in v1.40.50

func (c *AppIntegrationsService) GetDataIntegrationRequest(input *GetDataIntegrationInput) (req *request.Request, output *GetDataIntegrationOutput)

GetDataIntegrationRequest generates a "aws/request.Request" representing the client's request for the GetDataIntegration operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See GetDataIntegration for more information on using the GetDataIntegration API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the GetDataIntegrationRequest method.
req, resp := client.GetDataIntegrationRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/appintegrations-2020-07-29/GetDataIntegration

func (*AppIntegrationsService) GetDataIntegrationWithContext ¶ added in v1.40.50

func (c *AppIntegrationsService) GetDataIntegrationWithContext(ctx aws.Context, input *GetDataIntegrationInput, opts ...request.Option) (*GetDataIntegrationOutput, error)

GetDataIntegrationWithContext is the same as GetDataIntegration with the addition of the ability to pass a context and additional request options.

See GetDataIntegration for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*AppIntegrationsService) GetEventIntegration ¶

func (c *AppIntegrationsService) GetEventIntegration(input *GetEventIntegrationInput) (*GetEventIntegrationOutput, error)

GetEventIntegration API operation for Amazon AppIntegrations Service.

Returns information about the event integration.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon AppIntegrations Service's API operation GetEventIntegration for usage and error information.

Returned Error Types:

• InternalServiceError Request processing failed due to an error or failure with the service.

• ThrottlingException The throttling limit has been exceeded.

• ResourceNotFoundException The specified resource was not found.

• InvalidRequestException The request is not valid.

• AccessDeniedException You do not have sufficient access to perform this action.

See also, https://docs.aws.amazon.com/goto/WebAPI/appintegrations-2020-07-29/GetEventIntegration

func (*AppIntegrationsService) GetEventIntegrationRequest ¶

func (c *AppIntegrationsService) GetEventIntegrationRequest(input *GetEventIntegrationInput) (req *request.Request, output *GetEventIntegrationOutput)

GetEventIntegrationRequest generates a "aws/request.Request" representing the client's request for the GetEventIntegration operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See GetEventIntegration for more information on using the GetEventIntegration API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the GetEventIntegrationRequest method.
req, resp := client.GetEventIntegrationRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/appintegrations-2020-07-29/GetEventIntegration

func (*AppIntegrationsService) GetEventIntegrationWithContext ¶

func (c *AppIntegrationsService) GetEventIntegrationWithContext(ctx aws.Context, input *GetEventIntegrationInput, opts ...request.Option) (*GetEventIntegrationOutput, error)

GetEventIntegrationWithContext is the same as GetEventIntegration with the addition of the ability to pass a context and additional request options.

See GetEventIntegration for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*AppIntegrationsService) ListApplicationAssociations ¶ added in v1.49.8

func (c *AppIntegrationsService) ListApplicationAssociations(input *ListApplicationAssociationsInput) (*ListApplicationAssociationsOutput, error)

ListApplicationAssociations API operation for Amazon AppIntegrations Service.

Returns a paginated list of application associations for an application.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon AppIntegrations Service's API operation ListApplicationAssociations for usage and error information.

Returned Error Types:

• InternalServiceError Request processing failed due to an error or failure with the service.

• ThrottlingException The throttling limit has been exceeded.

• ResourceNotFoundException The specified resource was not found.

• InvalidRequestException The request is not valid.

• AccessDeniedException You do not have sufficient access to perform this action.

See also, https://docs.aws.amazon.com/goto/WebAPI/appintegrations-2020-07-29/ListApplicationAssociations

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/appintegrationsservice"
)

func main() {
	svc := appintegrationsservice.New(session.New())
	input := &appintegrationsservice.ListApplicationAssociationsInput{
		ApplicationId: aws.String("98542c53-e8ac-4570-9c85-c6552c8d9c5e"),
	}

	result, err := svc.ListApplicationAssociations(input)
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case appintegrationsservice.ErrCodeInternalServiceError:
				fmt.Println(appintegrationsservice.ErrCodeInternalServiceError, aerr.Error())
			case appintegrationsservice.ErrCodeThrottlingException:
				fmt.Println(appintegrationsservice.ErrCodeThrottlingException, aerr.Error())
			case appintegrationsservice.ErrCodeResourceNotFoundException:
				fmt.Println(appintegrationsservice.ErrCodeResourceNotFoundException, aerr.Error())
			case appintegrationsservice.ErrCodeInvalidRequestException:
				fmt.Println(appintegrationsservice.ErrCodeInvalidRequestException, aerr.Error())
			case appintegrationsservice.ErrCodeAccessDeniedException:
				fmt.Println(appintegrationsservice.ErrCodeAccessDeniedException, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}

Output:

func (*AppIntegrationsService) ListApplicationAssociationsPages ¶ added in v1.49.8

func (c *AppIntegrationsService) ListApplicationAssociationsPages(input *ListApplicationAssociationsInput, fn func(*ListApplicationAssociationsOutput, bool) bool) error

ListApplicationAssociationsPages iterates over the pages of a ListApplicationAssociations operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See ListApplicationAssociations method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service.

// Example iterating over at most 3 pages of a ListApplicationAssociations operation.
pageNum := 0
err := client.ListApplicationAssociationsPages(params,
    func(page *appintegrationsservice.ListApplicationAssociationsOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*AppIntegrationsService) ListApplicationAssociationsPagesWithContext ¶ added in v1.49.8

func (c *AppIntegrationsService) ListApplicationAssociationsPagesWithContext(ctx aws.Context, input *ListApplicationAssociationsInput, fn func(*ListApplicationAssociationsOutput, bool) bool, opts ...request.Option) error

ListApplicationAssociationsPagesWithContext same as ListApplicationAssociationsPages except it takes a Context and allows setting request options on the pages.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*AppIntegrationsService) ListApplicationAssociationsRequest ¶ added in v1.49.8

func (c *AppIntegrationsService) ListApplicationAssociationsRequest(input *ListApplicationAssociationsInput) (req *request.Request, output *ListApplicationAssociationsOutput)

ListApplicationAssociationsRequest generates a "aws/request.Request" representing the client's request for the ListApplicationAssociations operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See ListApplicationAssociations for more information on using the ListApplicationAssociations API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the ListApplicationAssociationsRequest method.
req, resp := client.ListApplicationAssociationsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/appintegrations-2020-07-29/ListApplicationAssociations

func (*AppIntegrationsService) ListApplicationAssociationsWithContext ¶ added in v1.49.8

func (c *AppIntegrationsService) ListApplicationAssociationsWithContext(ctx aws.Context, input *ListApplicationAssociationsInput, opts ...request.Option) (*ListApplicationAssociationsOutput, error)

ListApplicationAssociationsWithContext is the same as ListApplicationAssociations with the addition of the ability to pass a context and additional request options.

See ListApplicationAssociations for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*AppIntegrationsService) ListApplications ¶ added in v1.45.17

func (c *AppIntegrationsService) ListApplications(input *ListApplicationsInput) (*ListApplicationsOutput, error)

ListApplications API operation for Amazon AppIntegrations Service.

This API is in preview release and subject to change.

Lists applications in the account.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon AppIntegrations Service's API operation ListApplications for usage and error information.

Returned Error Types:

• InternalServiceError Request processing failed due to an error or failure with the service.

• ThrottlingException The throttling limit has been exceeded.

• InvalidRequestException The request is not valid.

• AccessDeniedException You do not have sufficient access to perform this action.

See also, https://docs.aws.amazon.com/goto/WebAPI/appintegrations-2020-07-29/ListApplications

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/appintegrationsservice"
)

func main() {
	svc := appintegrationsservice.New(session.New())
	input := &appintegrationsservice.ListApplicationsInput{
		MaxResults: aws.Int64(1),
	}

	result, err := svc.ListApplications(input)
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case appintegrationsservice.ErrCodeInternalServiceError:
				fmt.Println(appintegrationsservice.ErrCodeInternalServiceError, aerr.Error())
			case appintegrationsservice.ErrCodeThrottlingException:
				fmt.Println(appintegrationsservice.ErrCodeThrottlingException, aerr.Error())
			case appintegrationsservice.ErrCodeInvalidRequestException:
				fmt.Println(appintegrationsservice.ErrCodeInvalidRequestException, aerr.Error())
			case appintegrationsservice.ErrCodeAccessDeniedException:
				fmt.Println(appintegrationsservice.ErrCodeAccessDeniedException, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}

Output:

func (*AppIntegrationsService) ListApplicationsPages ¶ added in v1.45.17

func (c *AppIntegrationsService) ListApplicationsPages(input *ListApplicationsInput, fn func(*ListApplicationsOutput, bool) bool) error

ListApplicationsPages iterates over the pages of a ListApplications operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See ListApplications method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service.

// Example iterating over at most 3 pages of a ListApplications operation.
pageNum := 0
err := client.ListApplicationsPages(params,
    func(page *appintegrationsservice.ListApplicationsOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*AppIntegrationsService) ListApplicationsPagesWithContext ¶ added in v1.45.17

func (c *AppIntegrationsService) ListApplicationsPagesWithContext(ctx aws.Context, input *ListApplicationsInput, fn func(*ListApplicationsOutput, bool) bool, opts ...request.Option) error

ListApplicationsPagesWithContext same as ListApplicationsPages except it takes a Context and allows setting request options on the pages.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*AppIntegrationsService) ListApplicationsRequest ¶ added in v1.45.17

func (c *AppIntegrationsService) ListApplicationsRequest(input *ListApplicationsInput) (req *request.Request, output *ListApplicationsOutput)

ListApplicationsRequest generates a "aws/request.Request" representing the client's request for the ListApplications operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See ListApplications for more information on using the ListApplications API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the ListApplicationsRequest method.
req, resp := client.ListApplicationsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/appintegrations-2020-07-29/ListApplications

func (*AppIntegrationsService) ListApplicationsWithContext ¶ added in v1.45.17

func (c *AppIntegrationsService) ListApplicationsWithContext(ctx aws.Context, input *ListApplicationsInput, opts ...request.Option) (*ListApplicationsOutput, error)

ListApplicationsWithContext is the same as ListApplications with the addition of the ability to pass a context and additional request options.

See ListApplications for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*AppIntegrationsService) ListDataIntegrationAssociations ¶ added in v1.40.50

func (c *AppIntegrationsService) ListDataIntegrationAssociations(input *ListDataIntegrationAssociationsInput) (*ListDataIntegrationAssociationsOutput, error)

ListDataIntegrationAssociations API operation for Amazon AppIntegrations Service.

Returns a paginated list of DataIntegration associations in the account.

You cannot create a DataIntegration association for a DataIntegration that has been previously associated. Use a different DataIntegration, or recreate the DataIntegration using the CreateDataIntegration (https://docs.aws.amazon.com/appintegrations/latest/APIReference/API_CreateDataIntegration.html) API.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon AppIntegrations Service's API operation ListDataIntegrationAssociations for usage and error information.

Returned Error Types:

• InternalServiceError Request processing failed due to an error or failure with the service.

• ThrottlingException The throttling limit has been exceeded.

• ResourceNotFoundException The specified resource was not found.

• InvalidRequestException The request is not valid.

• AccessDeniedException You do not have sufficient access to perform this action.

See also, https://docs.aws.amazon.com/goto/WebAPI/appintegrations-2020-07-29/ListDataIntegrationAssociations

func (*AppIntegrationsService) ListDataIntegrationAssociationsPages ¶ added in v1.45.17

func (c *AppIntegrationsService) ListDataIntegrationAssociationsPages(input *ListDataIntegrationAssociationsInput, fn func(*ListDataIntegrationAssociationsOutput, bool) bool) error

ListDataIntegrationAssociationsPages iterates over the pages of a ListDataIntegrationAssociations operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See ListDataIntegrationAssociations method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service.

// Example iterating over at most 3 pages of a ListDataIntegrationAssociations operation.
pageNum := 0
err := client.ListDataIntegrationAssociationsPages(params,
    func(page *appintegrationsservice.ListDataIntegrationAssociationsOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*AppIntegrationsService) ListDataIntegrationAssociationsPagesWithContext ¶ added in v1.45.17

func (c *AppIntegrationsService) ListDataIntegrationAssociationsPagesWithContext(ctx aws.Context, input *ListDataIntegrationAssociationsInput, fn func(*ListDataIntegrationAssociationsOutput, bool) bool, opts ...request.Option) error

ListDataIntegrationAssociationsPagesWithContext same as ListDataIntegrationAssociationsPages except it takes a Context and allows setting request options on the pages.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*AppIntegrationsService) ListDataIntegrationAssociationsRequest ¶ added in v1.40.50

func (c *AppIntegrationsService) ListDataIntegrationAssociationsRequest(input *ListDataIntegrationAssociationsInput) (req *request.Request, output *ListDataIntegrationAssociationsOutput)

ListDataIntegrationAssociationsRequest generates a "aws/request.Request" representing the client's request for the ListDataIntegrationAssociations operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See ListDataIntegrationAssociations for more information on using the ListDataIntegrationAssociations API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the ListDataIntegrationAssociationsRequest method.
req, resp := client.ListDataIntegrationAssociationsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/appintegrations-2020-07-29/ListDataIntegrationAssociations

func (*AppIntegrationsService) ListDataIntegrationAssociationsWithContext ¶ added in v1.40.50

func (c *AppIntegrationsService) ListDataIntegrationAssociationsWithContext(ctx aws.Context, input *ListDataIntegrationAssociationsInput, opts ...request.Option) (*ListDataIntegrationAssociationsOutput, error)

ListDataIntegrationAssociationsWithContext is the same as ListDataIntegrationAssociations with the addition of the ability to pass a context and additional request options.

See ListDataIntegrationAssociations for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*AppIntegrationsService) ListDataIntegrations ¶ added in v1.40.50

func (c *AppIntegrationsService) ListDataIntegrations(input *ListDataIntegrationsInput) (*ListDataIntegrationsOutput, error)

ListDataIntegrations API operation for Amazon AppIntegrations Service.

Returns a paginated list of DataIntegrations in the account.

You cannot create a DataIntegration association for a DataIntegration that has been previously associated. Use a different DataIntegration, or recreate the DataIntegration using the CreateDataIntegration (https://docs.aws.amazon.com/appintegrations/latest/APIReference/API_CreateDataIntegration.html) API.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon AppIntegrations Service's API operation ListDataIntegrations for usage and error information.

Returned Error Types:

• InternalServiceError Request processing failed due to an error or failure with the service.

• ThrottlingException The throttling limit has been exceeded.

• InvalidRequestException The request is not valid.

• AccessDeniedException You do not have sufficient access to perform this action.

See also, https://docs.aws.amazon.com/goto/WebAPI/appintegrations-2020-07-29/ListDataIntegrations

func (*AppIntegrationsService) ListDataIntegrationsPages ¶ added in v1.45.17

func (c *AppIntegrationsService) ListDataIntegrationsPages(input *ListDataIntegrationsInput, fn func(*ListDataIntegrationsOutput, bool) bool) error

ListDataIntegrationsPages iterates over the pages of a ListDataIntegrations operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See ListDataIntegrations method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service.

// Example iterating over at most 3 pages of a ListDataIntegrations operation.
pageNum := 0
err := client.ListDataIntegrationsPages(params,
    func(page *appintegrationsservice.ListDataIntegrationsOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*AppIntegrationsService) ListDataIntegrationsPagesWithContext ¶ added in v1.45.17

func (c *AppIntegrationsService) ListDataIntegrationsPagesWithContext(ctx aws.Context, input *ListDataIntegrationsInput, fn func(*ListDataIntegrationsOutput, bool) bool, opts ...request.Option) error

ListDataIntegrationsPagesWithContext same as ListDataIntegrationsPages except it takes a Context and allows setting request options on the pages.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*AppIntegrationsService) ListDataIntegrationsRequest ¶ added in v1.40.50

func (c *AppIntegrationsService) ListDataIntegrationsRequest(input *ListDataIntegrationsInput) (req *request.Request, output *ListDataIntegrationsOutput)

ListDataIntegrationsRequest generates a "aws/request.Request" representing the client's request for the ListDataIntegrations operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See ListDataIntegrations for more information on using the ListDataIntegrations API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the ListDataIntegrationsRequest method.
req, resp := client.ListDataIntegrationsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/appintegrations-2020-07-29/ListDataIntegrations

func (*AppIntegrationsService) ListDataIntegrationsWithContext ¶ added in v1.40.50

func (c *AppIntegrationsService) ListDataIntegrationsWithContext(ctx aws.Context, input *ListDataIntegrationsInput, opts ...request.Option) (*ListDataIntegrationsOutput, error)

ListDataIntegrationsWithContext is the same as ListDataIntegrations with the addition of the ability to pass a context and additional request options.

See ListDataIntegrations for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*AppIntegrationsService) ListEventIntegrationAssociations ¶

func (c *AppIntegrationsService) ListEventIntegrationAssociations(input *ListEventIntegrationAssociationsInput) (*ListEventIntegrationAssociationsOutput, error)

ListEventIntegrationAssociations API operation for Amazon AppIntegrations Service.

Returns a paginated list of event integration associations in the account.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon AppIntegrations Service's API operation ListEventIntegrationAssociations for usage and error information.

Returned Error Types:

• InternalServiceError Request processing failed due to an error or failure with the service.

• ThrottlingException The throttling limit has been exceeded.

• ResourceNotFoundException The specified resource was not found.

• InvalidRequestException The request is not valid.

• AccessDeniedException You do not have sufficient access to perform this action.

See also, https://docs.aws.amazon.com/goto/WebAPI/appintegrations-2020-07-29/ListEventIntegrationAssociations

func (*AppIntegrationsService) ListEventIntegrationAssociationsPages ¶ added in v1.45.17

func (c *AppIntegrationsService) ListEventIntegrationAssociationsPages(input *ListEventIntegrationAssociationsInput, fn func(*ListEventIntegrationAssociationsOutput, bool) bool) error

ListEventIntegrationAssociationsPages iterates over the pages of a ListEventIntegrationAssociations operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See ListEventIntegrationAssociations method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service.

// Example iterating over at most 3 pages of a ListEventIntegrationAssociations operation.
pageNum := 0
err := client.ListEventIntegrationAssociationsPages(params,
    func(page *appintegrationsservice.ListEventIntegrationAssociationsOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*AppIntegrationsService) ListEventIntegrationAssociationsPagesWithContext ¶ added in v1.45.17

func (c *AppIntegrationsService) ListEventIntegrationAssociationsPagesWithContext(ctx aws.Context, input *ListEventIntegrationAssociationsInput, fn func(*ListEventIntegrationAssociationsOutput, bool) bool, opts ...request.Option) error

ListEventIntegrationAssociationsPagesWithContext same as ListEventIntegrationAssociationsPages except it takes a Context and allows setting request options on the pages.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*AppIntegrationsService) ListEventIntegrationAssociationsRequest ¶

func (c *AppIntegrationsService) ListEventIntegrationAssociationsRequest(input *ListEventIntegrationAssociationsInput) (req *request.Request, output *ListEventIntegrationAssociationsOutput)

ListEventIntegrationAssociationsRequest generates a "aws/request.Request" representing the client's request for the ListEventIntegrationAssociations operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See ListEventIntegrationAssociations for more information on using the ListEventIntegrationAssociations API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the ListEventIntegrationAssociationsRequest method.
req, resp := client.ListEventIntegrationAssociationsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/appintegrations-2020-07-29/ListEventIntegrationAssociations

func (*AppIntegrationsService) ListEventIntegrationAssociationsWithContext ¶

func (c *AppIntegrationsService) ListEventIntegrationAssociationsWithContext(ctx aws.Context, input *ListEventIntegrationAssociationsInput, opts ...request.Option) (*ListEventIntegrationAssociationsOutput, error)

ListEventIntegrationAssociationsWithContext is the same as ListEventIntegrationAssociations with the addition of the ability to pass a context and additional request options.

See ListEventIntegrationAssociations for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*AppIntegrationsService) ListEventIntegrations ¶

func (c *AppIntegrationsService) ListEventIntegrations(input *ListEventIntegrationsInput) (*ListEventIntegrationsOutput, error)

ListEventIntegrations API operation for Amazon AppIntegrations Service.

Returns a paginated list of event integrations in the account.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon AppIntegrations Service's API operation ListEventIntegrations for usage and error information.

Returned Error Types:

• InternalServiceError Request processing failed due to an error or failure with the service.

• ThrottlingException The throttling limit has been exceeded.

• InvalidRequestException The request is not valid.

• AccessDeniedException You do not have sufficient access to perform this action.

See also, https://docs.aws.amazon.com/goto/WebAPI/appintegrations-2020-07-29/ListEventIntegrations

func (*AppIntegrationsService) ListEventIntegrationsPages ¶ added in v1.45.17

func (c *AppIntegrationsService) ListEventIntegrationsPages(input *ListEventIntegrationsInput, fn func(*ListEventIntegrationsOutput, bool) bool) error

ListEventIntegrationsPages iterates over the pages of a ListEventIntegrations operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See ListEventIntegrations method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service.

// Example iterating over at most 3 pages of a ListEventIntegrations operation.
pageNum := 0
err := client.ListEventIntegrationsPages(params,
    func(page *appintegrationsservice.ListEventIntegrationsOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*AppIntegrationsService) ListEventIntegrationsPagesWithContext ¶ added in v1.45.17

func (c *AppIntegrationsService) ListEventIntegrationsPagesWithContext(ctx aws.Context, input *ListEventIntegrationsInput, fn func(*ListEventIntegrationsOutput, bool) bool, opts ...request.Option) error

ListEventIntegrationsPagesWithContext same as ListEventIntegrationsPages except it takes a Context and allows setting request options on the pages.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*AppIntegrationsService) ListEventIntegrationsRequest ¶

func (c *AppIntegrationsService) ListEventIntegrationsRequest(input *ListEventIntegrationsInput) (req *request.Request, output *ListEventIntegrationsOutput)

ListEventIntegrationsRequest generates a "aws/request.Request" representing the client's request for the ListEventIntegrations operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See ListEventIntegrations for more information on using the ListEventIntegrations API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the ListEventIntegrationsRequest method.
req, resp := client.ListEventIntegrationsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/appintegrations-2020-07-29/ListEventIntegrations

func (*AppIntegrationsService) ListEventIntegrationsWithContext ¶

func (c *AppIntegrationsService) ListEventIntegrationsWithContext(ctx aws.Context, input *ListEventIntegrationsInput, opts ...request.Option) (*ListEventIntegrationsOutput, error)

ListEventIntegrationsWithContext is the same as ListEventIntegrations with the addition of the ability to pass a context and additional request options.

See ListEventIntegrations for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*AppIntegrationsService) ListTagsForResource ¶

func (c *AppIntegrationsService) ListTagsForResource(input *ListTagsForResourceInput) (*ListTagsForResourceOutput, error)

ListTagsForResource API operation for Amazon AppIntegrations Service.

Lists the tags for the specified resource.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon AppIntegrations Service's API operation ListTagsForResource for usage and error information.

Returned Error Types:

• InvalidRequestException The request is not valid.

• InternalServiceError Request processing failed due to an error or failure with the service.

• ResourceNotFoundException The specified resource was not found.

• ThrottlingException The throttling limit has been exceeded.

See also, https://docs.aws.amazon.com/goto/WebAPI/appintegrations-2020-07-29/ListTagsForResource

func (*AppIntegrationsService) ListTagsForResourceRequest ¶

func (c *AppIntegrationsService) ListTagsForResourceRequest(input *ListTagsForResourceInput) (req *request.Request, output *ListTagsForResourceOutput)

ListTagsForResourceRequest generates a "aws/request.Request" representing the client's request for the ListTagsForResource operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See ListTagsForResource for more information on using the ListTagsForResource API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the ListTagsForResourceRequest method.
req, resp := client.ListTagsForResourceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/appintegrations-2020-07-29/ListTagsForResource

func (*AppIntegrationsService) ListTagsForResourceWithContext ¶

func (c *AppIntegrationsService) ListTagsForResourceWithContext(ctx aws.Context, input *ListTagsForResourceInput, opts ...request.Option) (*ListTagsForResourceOutput, error)

ListTagsForResourceWithContext is the same as ListTagsForResource with the addition of the ability to pass a context and additional request options.

See ListTagsForResource for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*AppIntegrationsService) TagResource ¶

func (c *AppIntegrationsService) TagResource(input *TagResourceInput) (*TagResourceOutput, error)

TagResource API operation for Amazon AppIntegrations Service.

Adds the specified tags to the specified resource.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon AppIntegrations Service's API operation TagResource for usage and error information.

Returned Error Types:

• InvalidRequestException The request is not valid.

• InternalServiceError Request processing failed due to an error or failure with the service.

• ResourceNotFoundException The specified resource was not found.

• ThrottlingException The throttling limit has been exceeded.

See also, https://docs.aws.amazon.com/goto/WebAPI/appintegrations-2020-07-29/TagResource

func (*AppIntegrationsService) TagResourceRequest ¶

func (c *AppIntegrationsService) TagResourceRequest(input *TagResourceInput) (req *request.Request, output *TagResourceOutput)

TagResourceRequest generates a "aws/request.Request" representing the client's request for the TagResource operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See TagResource for more information on using the TagResource API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the TagResourceRequest method.
req, resp := client.TagResourceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/appintegrations-2020-07-29/TagResource

func (*AppIntegrationsService) TagResourceWithContext ¶

func (c *AppIntegrationsService) TagResourceWithContext(ctx aws.Context, input *TagResourceInput, opts ...request.Option) (*TagResourceOutput, error)

TagResourceWithContext is the same as TagResource with the addition of the ability to pass a context and additional request options.

See TagResource for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*AppIntegrationsService) UntagResource ¶

func (c *AppIntegrationsService) UntagResource(input *UntagResourceInput) (*UntagResourceOutput, error)

UntagResource API operation for Amazon AppIntegrations Service.

Removes the specified tags from the specified resource.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon AppIntegrations Service's API operation UntagResource for usage and error information.

Returned Error Types:

• InvalidRequestException The request is not valid.

• InternalServiceError Request processing failed due to an error or failure with the service.

• ResourceNotFoundException The specified resource was not found.

• ThrottlingException The throttling limit has been exceeded.

See also, https://docs.aws.amazon.com/goto/WebAPI/appintegrations-2020-07-29/UntagResource

func (*AppIntegrationsService) UntagResourceRequest ¶

func (c *AppIntegrationsService) UntagResourceRequest(input *UntagResourceInput) (req *request.Request, output *UntagResourceOutput)

UntagResourceRequest generates a "aws/request.Request" representing the client's request for the UntagResource operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See UntagResource for more information on using the UntagResource API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the UntagResourceRequest method.
req, resp := client.UntagResourceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/appintegrations-2020-07-29/UntagResource

func (*AppIntegrationsService) UntagResourceWithContext ¶

func (c *AppIntegrationsService) UntagResourceWithContext(ctx aws.Context, input *UntagResourceInput, opts ...request.Option) (*UntagResourceOutput, error)

UntagResourceWithContext is the same as UntagResource with the addition of the ability to pass a context and additional request options.

See UntagResource for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*AppIntegrationsService) UpdateApplication ¶ added in v1.45.17

func (c *AppIntegrationsService) UpdateApplication(input *UpdateApplicationInput) (*UpdateApplicationOutput, error)

UpdateApplication API operation for Amazon AppIntegrations Service.

This API is in preview release and subject to change.

Updates and persists an Application resource.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon AppIntegrations Service's API operation UpdateApplication for usage and error information.

Returned Error Types:

• InternalServiceError Request processing failed due to an error or failure with the service.

• ThrottlingException The throttling limit has been exceeded.

• ResourceNotFoundException The specified resource was not found.

• InvalidRequestException The request is not valid.

• AccessDeniedException You do not have sufficient access to perform this action.

• UnsupportedOperationException The operation is not supported.

See also, https://docs.aws.amazon.com/goto/WebAPI/appintegrations-2020-07-29/UpdateApplication

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/appintegrationsservice"
)

func main() {
	svc := appintegrationsservice.New(session.New())
	input := &appintegrationsservice.UpdateApplicationInput{
		Arn:  aws.String("arn:aws:app-integrations:us-west-2:0123456789012:application/98542c53-e8ac-4570-9c85-c6552c8d9c5e"),
		Name: aws.String("My New Application Name"),
	}

	result, err := svc.UpdateApplication(input)
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case appintegrationsservice.ErrCodeInternalServiceError:
				fmt.Println(appintegrationsservice.ErrCodeInternalServiceError, aerr.Error())
			case appintegrationsservice.ErrCodeThrottlingException:
				fmt.Println(appintegrationsservice.ErrCodeThrottlingException, aerr.Error())
			case appintegrationsservice.ErrCodeResourceNotFoundException:
				fmt.Println(appintegrationsservice.ErrCodeResourceNotFoundException, aerr.Error())
			case appintegrationsservice.ErrCodeInvalidRequestException:
				fmt.Println(appintegrationsservice.ErrCodeInvalidRequestException, aerr.Error())
			case appintegrationsservice.ErrCodeAccessDeniedException:
				fmt.Println(appintegrationsservice.ErrCodeAccessDeniedException, aerr.Error())
			case appintegrationsservice.ErrCodeUnsupportedOperationException:
				fmt.Println(appintegrationsservice.ErrCodeUnsupportedOperationException, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}

Output:

func (*AppIntegrationsService) UpdateApplicationRequest ¶ added in v1.45.17

func (c *AppIntegrationsService) UpdateApplicationRequest(input *UpdateApplicationInput) (req *request.Request, output *UpdateApplicationOutput)

UpdateApplicationRequest generates a "aws/request.Request" representing the client's request for the UpdateApplication operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See UpdateApplication for more information on using the UpdateApplication API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the UpdateApplicationRequest method.
req, resp := client.UpdateApplicationRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/appintegrations-2020-07-29/UpdateApplication

func (*AppIntegrationsService) UpdateApplicationWithContext ¶ added in v1.45.17

func (c *AppIntegrationsService) UpdateApplicationWithContext(ctx aws.Context, input *UpdateApplicationInput, opts ...request.Option) (*UpdateApplicationOutput, error)

UpdateApplicationWithContext is the same as UpdateApplication with the addition of the ability to pass a context and additional request options.

See UpdateApplication for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*AppIntegrationsService) UpdateDataIntegration ¶ added in v1.40.50

func (c *AppIntegrationsService) UpdateDataIntegration(input *UpdateDataIntegrationInput) (*UpdateDataIntegrationOutput, error)

UpdateDataIntegration API operation for Amazon AppIntegrations Service.

Updates the description of a DataIntegration.

You cannot create a DataIntegration association for a DataIntegration that has been previously associated. Use a different DataIntegration, or recreate the DataIntegration using the CreateDataIntegration (https://docs.aws.amazon.com/appintegrations/latest/APIReference/API_CreateDataIntegration.html) API.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon AppIntegrations Service's API operation UpdateDataIntegration for usage and error information.

Returned Error Types:

• InternalServiceError Request processing failed due to an error or failure with the service.

• ThrottlingException The throttling limit has been exceeded.

• ResourceNotFoundException The specified resource was not found.

• InvalidRequestException The request is not valid.

• AccessDeniedException You do not have sufficient access to perform this action.

See also, https://docs.aws.amazon.com/goto/WebAPI/appintegrations-2020-07-29/UpdateDataIntegration

func (*AppIntegrationsService) UpdateDataIntegrationRequest ¶ added in v1.40.50

func (c *AppIntegrationsService) UpdateDataIntegrationRequest(input *UpdateDataIntegrationInput) (req *request.Request, output *UpdateDataIntegrationOutput)

UpdateDataIntegrationRequest generates a "aws/request.Request" representing the client's request for the UpdateDataIntegration operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See UpdateDataIntegration for more information on using the UpdateDataIntegration API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the UpdateDataIntegrationRequest method.
req, resp := client.UpdateDataIntegrationRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/appintegrations-2020-07-29/UpdateDataIntegration

func (*AppIntegrationsService) UpdateDataIntegrationWithContext ¶ added in v1.40.50

func (c *AppIntegrationsService) UpdateDataIntegrationWithContext(ctx aws.Context, input *UpdateDataIntegrationInput, opts ...request.Option) (*UpdateDataIntegrationOutput, error)

UpdateDataIntegrationWithContext is the same as UpdateDataIntegration with the addition of the ability to pass a context and additional request options.

See UpdateDataIntegration for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*AppIntegrationsService) UpdateEventIntegration ¶

func (c *AppIntegrationsService) UpdateEventIntegration(input *UpdateEventIntegrationInput) (*UpdateEventIntegrationOutput, error)

UpdateEventIntegration API operation for Amazon AppIntegrations Service.

Updates the description of an event integration.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon AppIntegrations Service's API operation UpdateEventIntegration for usage and error information.

Returned Error Types:

• InternalServiceError Request processing failed due to an error or failure with the service.

• ThrottlingException The throttling limit has been exceeded.

• ResourceNotFoundException The specified resource was not found.

• InvalidRequestException The request is not valid.

• AccessDeniedException You do not have sufficient access to perform this action.

See also, https://docs.aws.amazon.com/goto/WebAPI/appintegrations-2020-07-29/UpdateEventIntegration

func (*AppIntegrationsService) UpdateEventIntegrationRequest ¶

func (c *AppIntegrationsService) UpdateEventIntegrationRequest(input *UpdateEventIntegrationInput) (req *request.Request, output *UpdateEventIntegrationOutput)

UpdateEventIntegrationRequest generates a "aws/request.Request" representing the client's request for the UpdateEventIntegration operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See UpdateEventIntegration for more information on using the UpdateEventIntegration API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the UpdateEventIntegrationRequest method.
req, resp := client.UpdateEventIntegrationRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/appintegrations-2020-07-29/UpdateEventIntegration

func (*AppIntegrationsService) UpdateEventIntegrationWithContext ¶

func (c *AppIntegrationsService) UpdateEventIntegrationWithContext(ctx aws.Context, input *UpdateEventIntegrationInput, opts ...request.Option) (*UpdateEventIntegrationOutput, error)

UpdateEventIntegrationWithContext is the same as UpdateEventIntegration with the addition of the ability to pass a context and additional request options.

See UpdateEventIntegration for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (ApplicationAssociationSummary) GoString ¶ added in v1.49.8

func (s ApplicationAssociationSummary) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ApplicationAssociationSummary) SetApplicationArn ¶ added in v1.49.8

func (s *ApplicationAssociationSummary) SetApplicationArn(v string) *ApplicationAssociationSummary

SetApplicationArn sets the ApplicationArn field's value.

func (*ApplicationAssociationSummary) SetApplicationAssociationArn ¶ added in v1.49.8

func (s *ApplicationAssociationSummary) SetApplicationAssociationArn(v string) *ApplicationAssociationSummary

SetApplicationAssociationArn sets the ApplicationAssociationArn field's value.

func (*ApplicationAssociationSummary) SetClientId ¶ added in v1.49.8

func (s *ApplicationAssociationSummary) SetClientId(v string) *ApplicationAssociationSummary

SetClientId sets the ClientId field's value.

func (ApplicationAssociationSummary) String ¶ added in v1.49.8

func (s ApplicationAssociationSummary) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (ApplicationSourceConfig) GoString ¶ added in v1.45.17

func (s ApplicationSourceConfig) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ApplicationSourceConfig) SetExternalUrlConfig ¶ added in v1.45.17

func (s *ApplicationSourceConfig) SetExternalUrlConfig(v *ExternalUrlConfig) *ApplicationSourceConfig

SetExternalUrlConfig sets the ExternalUrlConfig field's value.

func (ApplicationSourceConfig) String ¶ added in v1.45.17

func (s ApplicationSourceConfig) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ApplicationSourceConfig) Validate ¶ added in v1.45.17

func (s *ApplicationSourceConfig) Validate() error

Validate inspects the fields of the type to determine if they are valid.

func (ApplicationSummary) GoString ¶ added in v1.45.17

func (s ApplicationSummary) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ApplicationSummary) SetArn ¶ added in v1.45.17

func (s *ApplicationSummary) SetArn(v string) *ApplicationSummary

SetArn sets the Arn field's value.

func (*ApplicationSummary) SetCreatedTime ¶ added in v1.45.17

func (s *ApplicationSummary) SetCreatedTime(v time.Time) *ApplicationSummary

SetCreatedTime sets the CreatedTime field's value.

func (*ApplicationSummary) SetId ¶ added in v1.45.17

func (s *ApplicationSummary) SetId(v string) *ApplicationSummary

SetId sets the Id field's value.

func (*ApplicationSummary) SetLastModifiedTime ¶ added in v1.45.17

func (s *ApplicationSummary) SetLastModifiedTime(v time.Time) *ApplicationSummary

SetLastModifiedTime sets the LastModifiedTime field's value.

func (*ApplicationSummary) SetName ¶ added in v1.45.17

func (s *ApplicationSummary) SetName(v string) *ApplicationSummary

SetName sets the Name field's value.

func (*ApplicationSummary) SetNamespace ¶ added in v1.45.17

func (s *ApplicationSummary) SetNamespace(v string) *ApplicationSummary

SetNamespace sets the Namespace field's value.

func (ApplicationSummary) String ¶ added in v1.45.17

func (s ApplicationSummary) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (CreateApplicationInput) GoString ¶ added in v1.45.17

func (s CreateApplicationInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateApplicationInput) SetApplicationSourceConfig ¶ added in v1.45.17

func (s *CreateApplicationInput) SetApplicationSourceConfig(v *ApplicationSourceConfig) *CreateApplicationInput

SetApplicationSourceConfig sets the ApplicationSourceConfig field's value.

func (*CreateApplicationInput) SetClientToken ¶ added in v1.45.17

func (s *CreateApplicationInput) SetClientToken(v string) *CreateApplicationInput

SetClientToken sets the ClientToken field's value.

func (*CreateApplicationInput) SetDescription ¶ added in v1.45.17

func (s *CreateApplicationInput) SetDescription(v string) *CreateApplicationInput

SetDescription sets the Description field's value.

func (*CreateApplicationInput) SetName ¶ added in v1.45.17

func (s *CreateApplicationInput) SetName(v string) *CreateApplicationInput

SetName sets the Name field's value.

func (*CreateApplicationInput) SetNamespace ¶ added in v1.45.17

func (s *CreateApplicationInput) SetNamespace(v string) *CreateApplicationInput

SetNamespace sets the Namespace field's value.

func (*CreateApplicationInput) SetPermissions ¶ added in v1.49.8

func (s *CreateApplicationInput) SetPermissions(v []*string) *CreateApplicationInput

SetPermissions sets the Permissions field's value.

func (*CreateApplicationInput) SetPublications ¶ added in v1.45.17

func (s *CreateApplicationInput) SetPublications(v []*Publication) *CreateApplicationInput

SetPublications sets the Publications field's value.

func (*CreateApplicationInput) SetSubscriptions ¶ added in v1.45.17

func (s *CreateApplicationInput) SetSubscriptions(v []*Subscription) *CreateApplicationInput

SetSubscriptions sets the Subscriptions field's value.

func (*CreateApplicationInput) SetTags ¶ added in v1.45.17

func (s *CreateApplicationInput) SetTags(v map[string]*string) *CreateApplicationInput

SetTags sets the Tags field's value.

func (CreateApplicationInput) String ¶ added in v1.45.17

func (s CreateApplicationInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateApplicationInput) Validate ¶ added in v1.45.17

func (s *CreateApplicationInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

func (CreateApplicationOutput) GoString ¶ added in v1.45.17

func (s CreateApplicationOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateApplicationOutput) SetArn ¶ added in v1.45.17

func (s *CreateApplicationOutput) SetArn(v string) *CreateApplicationOutput

SetArn sets the Arn field's value.

func (*CreateApplicationOutput) SetId ¶ added in v1.45.17

func (s *CreateApplicationOutput) SetId(v string) *CreateApplicationOutput

SetId sets the Id field's value.

func (CreateApplicationOutput) String ¶ added in v1.45.17

func (s CreateApplicationOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (CreateDataIntegrationInput) GoString ¶ added in v1.40.50

func (s CreateDataIntegrationInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateDataIntegrationInput) SetClientToken ¶ added in v1.40.50

func (s *CreateDataIntegrationInput) SetClientToken(v string) *CreateDataIntegrationInput

SetClientToken sets the ClientToken field's value.

func (*CreateDataIntegrationInput) SetDescription ¶ added in v1.40.50

func (s *CreateDataIntegrationInput) SetDescription(v string) *CreateDataIntegrationInput

SetDescription sets the Description field's value.

func (*CreateDataIntegrationInput) SetFileConfiguration ¶ added in v1.44.220

func (s *CreateDataIntegrationInput) SetFileConfiguration(v *FileConfiguration) *CreateDataIntegrationInput

SetFileConfiguration sets the FileConfiguration field's value.

func (*CreateDataIntegrationInput) SetKmsKey ¶ added in v1.40.50

func (s *CreateDataIntegrationInput) SetKmsKey(v string) *CreateDataIntegrationInput

SetKmsKey sets the KmsKey field's value.

func (*CreateDataIntegrationInput) SetName ¶ added in v1.40.50

func (s *CreateDataIntegrationInput) SetName(v string) *CreateDataIntegrationInput

SetName sets the Name field's value.

func (*CreateDataIntegrationInput) SetObjectConfiguration ¶ added in v1.44.220

func (s *CreateDataIntegrationInput) SetObjectConfiguration(v map[string]map[string][]*string) *CreateDataIntegrationInput

SetObjectConfiguration sets the ObjectConfiguration field's value.

func (*CreateDataIntegrationInput) SetScheduleConfig ¶ added in v1.40.50

func (s *CreateDataIntegrationInput) SetScheduleConfig(v *ScheduleConfiguration) *CreateDataIntegrationInput

SetScheduleConfig sets the ScheduleConfig field's value.

func (*CreateDataIntegrationInput) SetSourceURI ¶ added in v1.40.50

func (s *CreateDataIntegrationInput) SetSourceURI(v string) *CreateDataIntegrationInput

SetSourceURI sets the SourceURI field's value.

func (*CreateDataIntegrationInput) SetTags ¶ added in v1.40.50

func (s *CreateDataIntegrationInput) SetTags(v map[string]*string) *CreateDataIntegrationInput

SetTags sets the Tags field's value.

func (CreateDataIntegrationInput) String ¶ added in v1.40.50

func (s CreateDataIntegrationInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateDataIntegrationInput) Validate ¶ added in v1.40.50

func (s *CreateDataIntegrationInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

func (CreateDataIntegrationOutput) GoString ¶ added in v1.40.50

func (s CreateDataIntegrationOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateDataIntegrationOutput) SetArn ¶ added in v1.40.50

func (s *CreateDataIntegrationOutput) SetArn(v string) *CreateDataIntegrationOutput

SetArn sets the Arn field's value.

func (*CreateDataIntegrationOutput) SetClientToken ¶ added in v1.40.50

func (s *CreateDataIntegrationOutput) SetClientToken(v string) *CreateDataIntegrationOutput

SetClientToken sets the ClientToken field's value.

func (*CreateDataIntegrationOutput) SetDescription ¶ added in v1.40.50

func (s *CreateDataIntegrationOutput) SetDescription(v string) *CreateDataIntegrationOutput

SetDescription sets the Description field's value.

func (*CreateDataIntegrationOutput) SetFileConfiguration ¶ added in v1.44.220

func (s *CreateDataIntegrationOutput) SetFileConfiguration(v *FileConfiguration) *CreateDataIntegrationOutput

SetFileConfiguration sets the FileConfiguration field's value.

func (*CreateDataIntegrationOutput) SetId ¶ added in v1.40.50

func (s *CreateDataIntegrationOutput) SetId(v string) *CreateDataIntegrationOutput

SetId sets the Id field's value.

func (*CreateDataIntegrationOutput) SetKmsKey ¶ added in v1.40.50

func (s *CreateDataIntegrationOutput) SetKmsKey(v string) *CreateDataIntegrationOutput

SetKmsKey sets the KmsKey field's value.

func (*CreateDataIntegrationOutput) SetName ¶ added in v1.40.50

func (s *CreateDataIntegrationOutput) SetName(v string) *CreateDataIntegrationOutput

SetName sets the Name field's value.

func (*CreateDataIntegrationOutput) SetObjectConfiguration ¶ added in v1.44.220

func (s *CreateDataIntegrationOutput) SetObjectConfiguration(v map[string]map[string][]*string) *CreateDataIntegrationOutput

SetObjectConfiguration sets the ObjectConfiguration field's value.

func (*CreateDataIntegrationOutput) SetScheduleConfiguration ¶ added in v1.40.50

func (s *CreateDataIntegrationOutput) SetScheduleConfiguration(v *ScheduleConfiguration) *CreateDataIntegrationOutput

SetScheduleConfiguration sets the ScheduleConfiguration field's value.

func (*CreateDataIntegrationOutput) SetSourceURI ¶ added in v1.40.50

func (s *CreateDataIntegrationOutput) SetSourceURI(v string) *CreateDataIntegrationOutput

SetSourceURI sets the SourceURI field's value.

func (*CreateDataIntegrationOutput) SetTags ¶ added in v1.40.50

func (s *CreateDataIntegrationOutput) SetTags(v map[string]*string) *CreateDataIntegrationOutput

SetTags sets the Tags field's value.

func (CreateDataIntegrationOutput) String ¶ added in v1.40.50

func (s CreateDataIntegrationOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (CreateEventIntegrationInput) GoString ¶

func (s CreateEventIntegrationInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateEventIntegrationInput) SetClientToken ¶

func (s *CreateEventIntegrationInput) SetClientToken(v string) *CreateEventIntegrationInput

SetClientToken sets the ClientToken field's value.

func (*CreateEventIntegrationInput) SetDescription ¶

func (s *CreateEventIntegrationInput) SetDescription(v string) *CreateEventIntegrationInput

SetDescription sets the Description field's value.

func (*CreateEventIntegrationInput) SetEventBridgeBus ¶

func (s *CreateEventIntegrationInput) SetEventBridgeBus(v string) *CreateEventIntegrationInput

SetEventBridgeBus sets the EventBridgeBus field's value.

func (*CreateEventIntegrationInput) SetEventFilter ¶

func (s *CreateEventIntegrationInput) SetEventFilter(v *EventFilter) *CreateEventIntegrationInput

SetEventFilter sets the EventFilter field's value.

func (*CreateEventIntegrationInput) SetName ¶

func (s *CreateEventIntegrationInput) SetName(v string) *CreateEventIntegrationInput

SetName sets the Name field's value.

func (*CreateEventIntegrationInput) SetTags ¶

func (s *CreateEventIntegrationInput) SetTags(v map[string]*string) *CreateEventIntegrationInput

SetTags sets the Tags field's value.

func (CreateEventIntegrationInput) String ¶

func (s CreateEventIntegrationInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateEventIntegrationInput) Validate ¶

func (s *CreateEventIntegrationInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

func (CreateEventIntegrationOutput) GoString ¶

func (s CreateEventIntegrationOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*CreateEventIntegrationOutput) SetEventIntegrationArn ¶

func (s *CreateEventIntegrationOutput) SetEventIntegrationArn(v string) *CreateEventIntegrationOutput

SetEventIntegrationArn sets the EventIntegrationArn field's value.

func (CreateEventIntegrationOutput) String ¶

func (s CreateEventIntegrationOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (DataIntegrationAssociationSummary) GoString ¶ added in v1.40.50

func (s DataIntegrationAssociationSummary) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DataIntegrationAssociationSummary) SetClientId ¶ added in v1.40.50

func (s *DataIntegrationAssociationSummary) SetClientId(v string) *DataIntegrationAssociationSummary

SetClientId sets the ClientId field's value.

func (*DataIntegrationAssociationSummary) SetDataIntegrationArn ¶ added in v1.40.50

func (s *DataIntegrationAssociationSummary) SetDataIntegrationArn(v string) *DataIntegrationAssociationSummary

SetDataIntegrationArn sets the DataIntegrationArn field's value.

func (*DataIntegrationAssociationSummary) SetDataIntegrationAssociationArn ¶ added in v1.40.50

func (s *DataIntegrationAssociationSummary) SetDataIntegrationAssociationArn(v string) *DataIntegrationAssociationSummary

SetDataIntegrationAssociationArn sets the DataIntegrationAssociationArn field's value.

func (DataIntegrationAssociationSummary) String ¶ added in v1.40.50

func (s DataIntegrationAssociationSummary) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (DataIntegrationSummary) GoString ¶ added in v1.40.50

func (s DataIntegrationSummary) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DataIntegrationSummary) SetArn ¶ added in v1.40.50

func (s *DataIntegrationSummary) SetArn(v string) *DataIntegrationSummary

SetArn sets the Arn field's value.

func (*DataIntegrationSummary) SetName ¶ added in v1.40.50

func (s *DataIntegrationSummary) SetName(v string) *DataIntegrationSummary

SetName sets the Name field's value.

func (*DataIntegrationSummary) SetSourceURI ¶ added in v1.40.50

func (s *DataIntegrationSummary) SetSourceURI(v string) *DataIntegrationSummary

SetSourceURI sets the SourceURI field's value.

func (DataIntegrationSummary) String ¶ added in v1.40.50

func (s DataIntegrationSummary) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (DeleteApplicationInput) GoString ¶ added in v1.49.8

func (s DeleteApplicationInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteApplicationInput) SetArn ¶ added in v1.49.8

func (s *DeleteApplicationInput) SetArn(v string) *DeleteApplicationInput

SetArn sets the Arn field's value.

func (DeleteApplicationInput) String ¶ added in v1.49.8

func (s DeleteApplicationInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteApplicationInput) Validate ¶ added in v1.49.8

func (s *DeleteApplicationInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

func (DeleteApplicationOutput) GoString ¶ added in v1.49.8

func (s DeleteApplicationOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (DeleteApplicationOutput) String ¶ added in v1.49.8

func (s DeleteApplicationOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (DeleteDataIntegrationInput) GoString ¶ added in v1.40.50

func (s DeleteDataIntegrationInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteDataIntegrationInput) SetDataIntegrationIdentifier ¶ added in v1.40.50

func (s *DeleteDataIntegrationInput) SetDataIntegrationIdentifier(v string) *DeleteDataIntegrationInput

SetDataIntegrationIdentifier sets the DataIntegrationIdentifier field's value.

func (DeleteDataIntegrationInput) String ¶ added in v1.40.50

func (s DeleteDataIntegrationInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteDataIntegrationInput) Validate ¶ added in v1.40.50

func (s *DeleteDataIntegrationInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

func (DeleteDataIntegrationOutput) GoString ¶ added in v1.40.50

func (s DeleteDataIntegrationOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (DeleteDataIntegrationOutput) String ¶ added in v1.40.50

func (s DeleteDataIntegrationOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (DeleteEventIntegrationInput) GoString ¶

func (s DeleteEventIntegrationInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteEventIntegrationInput) SetName ¶

func (s *DeleteEventIntegrationInput) SetName(v string) *DeleteEventIntegrationInput

SetName sets the Name field's value.

func (DeleteEventIntegrationInput) String ¶

func (s DeleteEventIntegrationInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DeleteEventIntegrationInput) Validate ¶

func (s *DeleteEventIntegrationInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

func (DeleteEventIntegrationOutput) GoString ¶

func (s DeleteEventIntegrationOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (DeleteEventIntegrationOutput) String ¶

func (s DeleteEventIntegrationOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DuplicateResourceException) Code ¶

func (s *DuplicateResourceException) Code() string

Code returns the exception type name.

func (*DuplicateResourceException) Error ¶

func (s *DuplicateResourceException) Error() string

func (DuplicateResourceException) GoString ¶

func (s DuplicateResourceException) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*DuplicateResourceException) Message ¶

func (s *DuplicateResourceException) Message() string

Message returns the exception's message.

func (*DuplicateResourceException) OrigErr ¶

func (s *DuplicateResourceException) OrigErr() error

OrigErr always returns nil, satisfies awserr.Error interface.

func (*DuplicateResourceException) RequestID ¶

func (s *DuplicateResourceException) RequestID() string

RequestID returns the service's response RequestID for request.

func (*DuplicateResourceException) StatusCode ¶

func (s *DuplicateResourceException) StatusCode() int

Status code returns the HTTP status code for the request's response error.

func (DuplicateResourceException) String ¶

func (s DuplicateResourceException) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (EventFilter) GoString ¶

func (s EventFilter) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*EventFilter) SetSource ¶

func (s *EventFilter) SetSource(v string) *EventFilter

SetSource sets the Source field's value.

func (EventFilter) String ¶

func (s EventFilter) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*EventFilter) Validate ¶

func (s *EventFilter) Validate() error

Validate inspects the fields of the type to determine if they are valid.

func (EventIntegration) GoString ¶

func (s EventIntegration) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*EventIntegration) SetDescription ¶

func (s *EventIntegration) SetDescription(v string) *EventIntegration

SetDescription sets the Description field's value.

func (*EventIntegration) SetEventBridgeBus ¶

func (s *EventIntegration) SetEventBridgeBus(v string) *EventIntegration

SetEventBridgeBus sets the EventBridgeBus field's value.

func (*EventIntegration) SetEventFilter ¶

func (s *EventIntegration) SetEventFilter(v *EventFilter) *EventIntegration

SetEventFilter sets the EventFilter field's value.

func (*EventIntegration) SetEventIntegrationArn ¶

func (s *EventIntegration) SetEventIntegrationArn(v string) *EventIntegration

SetEventIntegrationArn sets the EventIntegrationArn field's value.

func (*EventIntegration) SetName ¶

func (s *EventIntegration) SetName(v string) *EventIntegration

SetName sets the Name field's value.

func (*EventIntegration) SetTags ¶

func (s *EventIntegration) SetTags(v map[string]*string) *EventIntegration

SetTags sets the Tags field's value.

func (EventIntegration) String ¶

func (s EventIntegration) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (EventIntegrationAssociation) GoString ¶

func (s EventIntegrationAssociation) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*EventIntegrationAssociation) SetClientAssociationMetadata ¶

func (s *EventIntegrationAssociation) SetClientAssociationMetadata(v map[string]*string) *EventIntegrationAssociation

SetClientAssociationMetadata sets the ClientAssociationMetadata field's value.

func (*EventIntegrationAssociation) SetClientId ¶

func (s *EventIntegrationAssociation) SetClientId(v string) *EventIntegrationAssociation

SetClientId sets the ClientId field's value.

func (*EventIntegrationAssociation) SetEventBridgeRuleName ¶

func (s *EventIntegrationAssociation) SetEventBridgeRuleName(v string) *EventIntegrationAssociation

SetEventBridgeRuleName sets the EventBridgeRuleName field's value.

func (*EventIntegrationAssociation) SetEventIntegrationAssociationArn ¶

func (s *EventIntegrationAssociation) SetEventIntegrationAssociationArn(v string) *EventIntegrationAssociation

SetEventIntegrationAssociationArn sets the EventIntegrationAssociationArn field's value.

func (*EventIntegrationAssociation) SetEventIntegrationAssociationId ¶

func (s *EventIntegrationAssociation) SetEventIntegrationAssociationId(v string) *EventIntegrationAssociation

SetEventIntegrationAssociationId sets the EventIntegrationAssociationId field's value.

func (*EventIntegrationAssociation) SetEventIntegrationName ¶

func (s *EventIntegrationAssociation) SetEventIntegrationName(v string) *EventIntegrationAssociation

SetEventIntegrationName sets the EventIntegrationName field's value.

func (EventIntegrationAssociation) String ¶

func (s EventIntegrationAssociation) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (ExternalUrlConfig) GoString ¶ added in v1.45.17

func (s ExternalUrlConfig) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ExternalUrlConfig) SetAccessUrl ¶ added in v1.45.17

func (s *ExternalUrlConfig) SetAccessUrl(v string) *ExternalUrlConfig

SetAccessUrl sets the AccessUrl field's value.

func (*ExternalUrlConfig) SetApprovedOrigins ¶ added in v1.45.17

func (s *ExternalUrlConfig) SetApprovedOrigins(v []*string) *ExternalUrlConfig

SetApprovedOrigins sets the ApprovedOrigins field's value.

func (ExternalUrlConfig) String ¶ added in v1.45.17

func (s ExternalUrlConfig) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ExternalUrlConfig) Validate ¶ added in v1.45.17

func (s *ExternalUrlConfig) Validate() error

Validate inspects the fields of the type to determine if they are valid.

func (FileConfiguration) GoString ¶ added in v1.44.220

func (s FileConfiguration) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*FileConfiguration) SetFilters ¶ added in v1.44.220

func (s *FileConfiguration) SetFilters(v map[string][]*string) *FileConfiguration

SetFilters sets the Filters field's value.

func (*FileConfiguration) SetFolders ¶ added in v1.44.220

func (s *FileConfiguration) SetFolders(v []*string) *FileConfiguration

SetFolders sets the Folders field's value.

func (FileConfiguration) String ¶ added in v1.44.220

func (s FileConfiguration) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*FileConfiguration) Validate ¶ added in v1.44.220

func (s *FileConfiguration) Validate() error

Validate inspects the fields of the type to determine if they are valid.

func (GetApplicationInput) GoString ¶ added in v1.45.17

func (s GetApplicationInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*GetApplicationInput) SetArn ¶ added in v1.45.17

func (s *GetApplicationInput) SetArn(v string) *GetApplicationInput

SetArn sets the Arn field's value.

func (GetApplicationInput) String ¶ added in v1.45.17

func (s GetApplicationInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*GetApplicationInput) Validate ¶ added in v1.45.17

func (s *GetApplicationInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

func (GetApplicationOutput) GoString ¶ added in v1.45.17

func (s GetApplicationOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*GetApplicationOutput) SetApplicationSourceConfig ¶ added in v1.45.17

func (s *GetApplicationOutput) SetApplicationSourceConfig(v *ApplicationSourceConfig) *GetApplicationOutput

SetApplicationSourceConfig sets the ApplicationSourceConfig field's value.

func (*GetApplicationOutput) SetArn ¶ added in v1.45.17

func (s *GetApplicationOutput) SetArn(v string) *GetApplicationOutput

SetArn sets the Arn field's value.

func (*GetApplicationOutput) SetCreatedTime ¶ added in v1.45.17

func (s *GetApplicationOutput) SetCreatedTime(v time.Time) *GetApplicationOutput

SetCreatedTime sets the CreatedTime field's value.

func (*GetApplicationOutput) SetDescription ¶ added in v1.45.17

func (s *GetApplicationOutput) SetDescription(v string) *GetApplicationOutput

SetDescription sets the Description field's value.

func (*GetApplicationOutput) SetId ¶ added in v1.45.17

func (s *GetApplicationOutput) SetId(v string) *GetApplicationOutput

SetId sets the Id field's value.

func (*GetApplicationOutput) SetLastModifiedTime ¶ added in v1.45.17

func (s *GetApplicationOutput) SetLastModifiedTime(v time.Time) *GetApplicationOutput

SetLastModifiedTime sets the LastModifiedTime field's value.

func (*GetApplicationOutput) SetName ¶ added in v1.45.17

func (s *GetApplicationOutput) SetName(v string) *GetApplicationOutput

SetName sets the Name field's value.

func (*GetApplicationOutput) SetNamespace ¶ added in v1.45.17

func (s *GetApplicationOutput) SetNamespace(v string) *GetApplicationOutput

SetNamespace sets the Namespace field's value.

func (*GetApplicationOutput) SetPermissions ¶ added in v1.49.8

func (s *GetApplicationOutput) SetPermissions(v []*string) *GetApplicationOutput

SetPermissions sets the Permissions field's value.

func (*GetApplicationOutput) SetPublications ¶ added in v1.45.17

func (s *GetApplicationOutput) SetPublications(v []*Publication) *GetApplicationOutput

SetPublications sets the Publications field's value.

func (*GetApplicationOutput) SetSubscriptions ¶ added in v1.45.17

func (s *GetApplicationOutput) SetSubscriptions(v []*Subscription) *GetApplicationOutput

SetSubscriptions sets the Subscriptions field's value.

func (*GetApplicationOutput) SetTags ¶ added in v1.45.17

func (s *GetApplicationOutput) SetTags(v map[string]*string) *GetApplicationOutput

SetTags sets the Tags field's value.

func (GetApplicationOutput) String ¶ added in v1.45.17

func (s GetApplicationOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (GetDataIntegrationInput) GoString ¶ added in v1.40.50

func (s GetDataIntegrationInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*GetDataIntegrationInput) SetIdentifier ¶ added in v1.40.50

func (s *GetDataIntegrationInput) SetIdentifier(v string) *GetDataIntegrationInput

SetIdentifier sets the Identifier field's value.

func (GetDataIntegrationInput) String ¶ added in v1.40.50

func (s GetDataIntegrationInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*GetDataIntegrationInput) Validate ¶ added in v1.40.50

func (s *GetDataIntegrationInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

func (GetDataIntegrationOutput) GoString ¶ added in v1.40.50

func (s GetDataIntegrationOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*GetDataIntegrationOutput) SetArn ¶ added in v1.40.50

func (s *GetDataIntegrationOutput) SetArn(v string) *GetDataIntegrationOutput

SetArn sets the Arn field's value.

func (*GetDataIntegrationOutput) SetDescription ¶ added in v1.40.50

func (s *GetDataIntegrationOutput) SetDescription(v string) *GetDataIntegrationOutput

SetDescription sets the Description field's value.

func (*GetDataIntegrationOutput) SetFileConfiguration ¶ added in v1.44.220

func (s *GetDataIntegrationOutput) SetFileConfiguration(v *FileConfiguration) *GetDataIntegrationOutput

SetFileConfiguration sets the FileConfiguration field's value.

func (*GetDataIntegrationOutput) SetId ¶ added in v1.40.50

func (s *GetDataIntegrationOutput) SetId(v string) *GetDataIntegrationOutput

SetId sets the Id field's value.

func (*GetDataIntegrationOutput) SetKmsKey ¶ added in v1.40.50

func (s *GetDataIntegrationOutput) SetKmsKey(v string) *GetDataIntegrationOutput

SetKmsKey sets the KmsKey field's value.

func (*GetDataIntegrationOutput) SetName ¶ added in v1.40.50

func (s *GetDataIntegrationOutput) SetName(v string) *GetDataIntegrationOutput

SetName sets the Name field's value.

func (*GetDataIntegrationOutput) SetObjectConfiguration ¶ added in v1.44.220

func (s *GetDataIntegrationOutput) SetObjectConfiguration(v map[string]map[string][]*string) *GetDataIntegrationOutput

SetObjectConfiguration sets the ObjectConfiguration field's value.

func (*GetDataIntegrationOutput) SetScheduleConfiguration ¶ added in v1.40.50

func (s *GetDataIntegrationOutput) SetScheduleConfiguration(v *ScheduleConfiguration) *GetDataIntegrationOutput

SetScheduleConfiguration sets the ScheduleConfiguration field's value.

func (*GetDataIntegrationOutput) SetSourceURI ¶ added in v1.40.50

func (s *GetDataIntegrationOutput) SetSourceURI(v string) *GetDataIntegrationOutput

SetSourceURI sets the SourceURI field's value.

func (*GetDataIntegrationOutput) SetTags ¶ added in v1.40.50

func (s *GetDataIntegrationOutput) SetTags(v map[string]*string) *GetDataIntegrationOutput

SetTags sets the Tags field's value.

func (GetDataIntegrationOutput) String ¶ added in v1.40.50

func (s GetDataIntegrationOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (GetEventIntegrationInput) GoString ¶

func (s GetEventIntegrationInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*GetEventIntegrationInput) SetName ¶

func (s *GetEventIntegrationInput) SetName(v string) *GetEventIntegrationInput

SetName sets the Name field's value.

func (GetEventIntegrationInput) String ¶

func (s GetEventIntegrationInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*GetEventIntegrationInput) Validate ¶

func (s *GetEventIntegrationInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

func (GetEventIntegrationOutput) GoString ¶

func (s GetEventIntegrationOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*GetEventIntegrationOutput) SetDescription ¶

func (s *GetEventIntegrationOutput) SetDescription(v string) *GetEventIntegrationOutput

SetDescription sets the Description field's value.

func (*GetEventIntegrationOutput) SetEventBridgeBus ¶

func (s *GetEventIntegrationOutput) SetEventBridgeBus(v string) *GetEventIntegrationOutput

SetEventBridgeBus sets the EventBridgeBus field's value.

func (*GetEventIntegrationOutput) SetEventFilter ¶

func (s *GetEventIntegrationOutput) SetEventFilter(v *EventFilter) *GetEventIntegrationOutput

SetEventFilter sets the EventFilter field's value.

func (*GetEventIntegrationOutput) SetEventIntegrationArn ¶

func (s *GetEventIntegrationOutput) SetEventIntegrationArn(v string) *GetEventIntegrationOutput

SetEventIntegrationArn sets the EventIntegrationArn field's value.

func (*GetEventIntegrationOutput) SetName ¶

func (s *GetEventIntegrationOutput) SetName(v string) *GetEventIntegrationOutput

SetName sets the Name field's value.

func (*GetEventIntegrationOutput) SetTags ¶

func (s *GetEventIntegrationOutput) SetTags(v map[string]*string) *GetEventIntegrationOutput

SetTags sets the Tags field's value.

func (GetEventIntegrationOutput) String ¶

func (s GetEventIntegrationOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*InternalServiceError) Code ¶

func (s *InternalServiceError) Code() string

Code returns the exception type name.

func (*InternalServiceError) Error ¶

func (s *InternalServiceError) Error() string

func (InternalServiceError) GoString ¶

func (s InternalServiceError) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*InternalServiceError) Message ¶

func (s *InternalServiceError) Message() string

Message returns the exception's message.

func (*InternalServiceError) OrigErr ¶

func (s *InternalServiceError) OrigErr() error

OrigErr always returns nil, satisfies awserr.Error interface.

func (*InternalServiceError) RequestID ¶

func (s *InternalServiceError) RequestID() string

RequestID returns the service's response RequestID for request.

func (*InternalServiceError) StatusCode ¶

func (s *InternalServiceError) StatusCode() int

Status code returns the HTTP status code for the request's response error.

func (InternalServiceError) String ¶

func (s InternalServiceError) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*InvalidRequestException) Code ¶

func (s *InvalidRequestException) Code() string

Code returns the exception type name.

func (*InvalidRequestException) Error ¶

func (s *InvalidRequestException) Error() string

func (InvalidRequestException) GoString ¶

func (s InvalidRequestException) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*InvalidRequestException) Message ¶

func (s *InvalidRequestException) Message() string

Message returns the exception's message.

func (*InvalidRequestException) OrigErr ¶

func (s *InvalidRequestException) OrigErr() error

OrigErr always returns nil, satisfies awserr.Error interface.

func (*InvalidRequestException) RequestID ¶

func (s *InvalidRequestException) RequestID() string

RequestID returns the service's response RequestID for request.

func (*InvalidRequestException) StatusCode ¶

func (s *InvalidRequestException) StatusCode() int

Status code returns the HTTP status code for the request's response error.

func (InvalidRequestException) String ¶

func (s InvalidRequestException) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (ListApplicationAssociationsInput) GoString ¶ added in v1.49.8

func (s ListApplicationAssociationsInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ListApplicationAssociationsInput) SetApplicationId ¶ added in v1.49.8

func (s *ListApplicationAssociationsInput) SetApplicationId(v string) *ListApplicationAssociationsInput

SetApplicationId sets the ApplicationId field's value.

func (*ListApplicationAssociationsInput) SetMaxResults ¶ added in v1.49.8

func (s *ListApplicationAssociationsInput) SetMaxResults(v int64) *ListApplicationAssociationsInput

SetMaxResults sets the MaxResults field's value.

func (*ListApplicationAssociationsInput) SetNextToken ¶ added in v1.49.8

func (s *ListApplicationAssociationsInput) SetNextToken(v string) *ListApplicationAssociationsInput

SetNextToken sets the NextToken field's value.

func (ListApplicationAssociationsInput) String ¶ added in v1.49.8

func (s ListApplicationAssociationsInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ListApplicationAssociationsInput) Validate ¶ added in v1.49.8

func (s *ListApplicationAssociationsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

func (ListApplicationAssociationsOutput) GoString ¶ added in v1.49.8

func (s ListApplicationAssociationsOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ListApplicationAssociationsOutput) SetApplicationAssociations ¶ added in v1.49.8

func (s *ListApplicationAssociationsOutput) SetApplicationAssociations(v []*ApplicationAssociationSummary) *ListApplicationAssociationsOutput

SetApplicationAssociations sets the ApplicationAssociations field's value.

func (*ListApplicationAssociationsOutput) SetNextToken ¶ added in v1.49.8

func (s *ListApplicationAssociationsOutput) SetNextToken(v string) *ListApplicationAssociationsOutput

SetNextToken sets the NextToken field's value.

func (ListApplicationAssociationsOutput) String ¶ added in v1.49.8

func (s ListApplicationAssociationsOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (ListApplicationsInput) GoString ¶ added in v1.45.17

func (s ListApplicationsInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ListApplicationsInput) SetMaxResults ¶ added in v1.45.17

func (s *ListApplicationsInput) SetMaxResults(v int64) *ListApplicationsInput

SetMaxResults sets the MaxResults field's value.

func (*ListApplicationsInput) SetNextToken ¶ added in v1.45.17

func (s *ListApplicationsInput) SetNextToken(v string) *ListApplicationsInput

SetNextToken sets the NextToken field's value.

func (ListApplicationsInput) String ¶ added in v1.45.17

func (s ListApplicationsInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ListApplicationsInput) Validate ¶ added in v1.45.17

func (s *ListApplicationsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

func (ListApplicationsOutput) GoString ¶ added in v1.45.17

func (s ListApplicationsOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ListApplicationsOutput) SetApplications ¶ added in v1.45.17

func (s *ListApplicationsOutput) SetApplications(v []*ApplicationSummary) *ListApplicationsOutput

SetApplications sets the Applications field's value.

func (*ListApplicationsOutput) SetNextToken ¶ added in v1.45.17

func (s *ListApplicationsOutput) SetNextToken(v string) *ListApplicationsOutput

SetNextToken sets the NextToken field's value.

func (ListApplicationsOutput) String ¶ added in v1.45.17

func (s ListApplicationsOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (ListDataIntegrationAssociationsInput) GoString ¶ added in v1.40.50

func (s ListDataIntegrationAssociationsInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ListDataIntegrationAssociationsInput) SetDataIntegrationIdentifier ¶ added in v1.40.50

func (s *ListDataIntegrationAssociationsInput) SetDataIntegrationIdentifier(v string) *ListDataIntegrationAssociationsInput

SetDataIntegrationIdentifier sets the DataIntegrationIdentifier field's value.

func (*ListDataIntegrationAssociationsInput) SetMaxResults ¶ added in v1.40.50

func (s *ListDataIntegrationAssociationsInput) SetMaxResults(v int64) *ListDataIntegrationAssociationsInput

SetMaxResults sets the MaxResults field's value.

func (*ListDataIntegrationAssociationsInput) SetNextToken ¶ added in v1.40.50

func (s *ListDataIntegrationAssociationsInput) SetNextToken(v string) *ListDataIntegrationAssociationsInput

SetNextToken sets the NextToken field's value.

func (ListDataIntegrationAssociationsInput) String ¶ added in v1.40.50

func (s ListDataIntegrationAssociationsInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ListDataIntegrationAssociationsInput) Validate ¶ added in v1.40.50

func (s *ListDataIntegrationAssociationsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

func (ListDataIntegrationAssociationsOutput) GoString ¶ added in v1.40.50

func (s ListDataIntegrationAssociationsOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ListDataIntegrationAssociationsOutput) SetDataIntegrationAssociations ¶ added in v1.40.50

func (s *ListDataIntegrationAssociationsOutput) SetDataIntegrationAssociations(v []*DataIntegrationAssociationSummary) *ListDataIntegrationAssociationsOutput

SetDataIntegrationAssociations sets the DataIntegrationAssociations field's value.

func (*ListDataIntegrationAssociationsOutput) SetNextToken ¶ added in v1.40.50

func (s *ListDataIntegrationAssociationsOutput) SetNextToken(v string) *ListDataIntegrationAssociationsOutput

SetNextToken sets the NextToken field's value.

func (ListDataIntegrationAssociationsOutput) String ¶ added in v1.40.50

func (s ListDataIntegrationAssociationsOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (ListDataIntegrationsInput) GoString ¶ added in v1.40.50

func (s ListDataIntegrationsInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ListDataIntegrationsInput) SetMaxResults ¶ added in v1.40.50

func (s *ListDataIntegrationsInput) SetMaxResults(v int64) *ListDataIntegrationsInput

SetMaxResults sets the MaxResults field's value.

func (*ListDataIntegrationsInput) SetNextToken ¶ added in v1.40.50

func (s *ListDataIntegrationsInput) SetNextToken(v string) *ListDataIntegrationsInput

SetNextToken sets the NextToken field's value.

func (ListDataIntegrationsInput) String ¶ added in v1.40.50

func (s ListDataIntegrationsInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ListDataIntegrationsInput) Validate ¶ added in v1.40.50

func (s *ListDataIntegrationsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

func (ListDataIntegrationsOutput) GoString ¶ added in v1.40.50

func (s ListDataIntegrationsOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ListDataIntegrationsOutput) SetDataIntegrations ¶ added in v1.40.50

func (s *ListDataIntegrationsOutput) SetDataIntegrations(v []*DataIntegrationSummary) *ListDataIntegrationsOutput

SetDataIntegrations sets the DataIntegrations field's value.

func (*ListDataIntegrationsOutput) SetNextToken ¶ added in v1.40.50

func (s *ListDataIntegrationsOutput) SetNextToken(v string) *ListDataIntegrationsOutput

SetNextToken sets the NextToken field's value.

func (ListDataIntegrationsOutput) String ¶ added in v1.40.50

func (s ListDataIntegrationsOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (ListEventIntegrationAssociationsInput) GoString ¶

func (s ListEventIntegrationAssociationsInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ListEventIntegrationAssociationsInput) SetEventIntegrationName ¶

func (s *ListEventIntegrationAssociationsInput) SetEventIntegrationName(v string) *ListEventIntegrationAssociationsInput

SetEventIntegrationName sets the EventIntegrationName field's value.

func (*ListEventIntegrationAssociationsInput) SetMaxResults ¶

func (s *ListEventIntegrationAssociationsInput) SetMaxResults(v int64) *ListEventIntegrationAssociationsInput

SetMaxResults sets the MaxResults field's value.

func (*ListEventIntegrationAssociationsInput) SetNextToken ¶

func (s *ListEventIntegrationAssociationsInput) SetNextToken(v string) *ListEventIntegrationAssociationsInput

SetNextToken sets the NextToken field's value.

func (ListEventIntegrationAssociationsInput) String ¶

func (s ListEventIntegrationAssociationsInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ListEventIntegrationAssociationsInput) Validate ¶

func (s *ListEventIntegrationAssociationsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

func (ListEventIntegrationAssociationsOutput) GoString ¶

func (s ListEventIntegrationAssociationsOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ListEventIntegrationAssociationsOutput) SetEventIntegrationAssociations ¶

func (s *ListEventIntegrationAssociationsOutput) SetEventIntegrationAssociations(v []*EventIntegrationAssociation) *ListEventIntegrationAssociationsOutput

SetEventIntegrationAssociations sets the EventIntegrationAssociations field's value.

func (*ListEventIntegrationAssociationsOutput) SetNextToken ¶

func (s *ListEventIntegrationAssociationsOutput) SetNextToken(v string) *ListEventIntegrationAssociationsOutput

SetNextToken sets the NextToken field's value.

func (ListEventIntegrationAssociationsOutput) String ¶

func (s ListEventIntegrationAssociationsOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (ListEventIntegrationsInput) GoString ¶

func (s ListEventIntegrationsInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ListEventIntegrationsInput) SetMaxResults ¶

func (s *ListEventIntegrationsInput) SetMaxResults(v int64) *ListEventIntegrationsInput

SetMaxResults sets the MaxResults field's value.

func (*ListEventIntegrationsInput) SetNextToken ¶

func (s *ListEventIntegrationsInput) SetNextToken(v string) *ListEventIntegrationsInput

SetNextToken sets the NextToken field's value.

func (ListEventIntegrationsInput) String ¶

func (s ListEventIntegrationsInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ListEventIntegrationsInput) Validate ¶

func (s *ListEventIntegrationsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

func (ListEventIntegrationsOutput) GoString ¶

func (s ListEventIntegrationsOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ListEventIntegrationsOutput) SetEventIntegrations ¶

func (s *ListEventIntegrationsOutput) SetEventIntegrations(v []*EventIntegration) *ListEventIntegrationsOutput

SetEventIntegrations sets the EventIntegrations field's value.

func (*ListEventIntegrationsOutput) SetNextToken ¶

func (s *ListEventIntegrationsOutput) SetNextToken(v string) *ListEventIntegrationsOutput

SetNextToken sets the NextToken field's value.

func (ListEventIntegrationsOutput) String ¶

func (s ListEventIntegrationsOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (ListTagsForResourceInput) GoString ¶

func (s ListTagsForResourceInput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ListTagsForResourceInput) SetResourceArn ¶

func (s *ListTagsForResourceInput) SetResourceArn(v string) *ListTagsForResourceInput

SetResourceArn sets the ResourceArn field's value.

func (ListTagsForResourceInput) String ¶

func (s ListTagsForResourceInput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ListTagsForResourceInput) Validate ¶

func (s *ListTagsForResourceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

func (ListTagsForResourceOutput) GoString ¶

func (s ListTagsForResourceOutput) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ListTagsForResourceOutput) SetTags ¶

func (s *ListTagsForResourceOutput) SetTags(v map[string]*string) *ListTagsForResourceOutput

SetTags sets the Tags field's value.

func (ListTagsForResourceOutput) String ¶

func (s ListTagsForResourceOutput) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (Publication) GoString ¶ added in v1.45.17

func (s Publication) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*Publication) SetDescription ¶ added in v1.45.17

func (s *Publication) SetDescription(v string) *Publication

SetDescription sets the Description field's value.

func (*Publication) SetEvent ¶ added in v1.45.17

func (s *Publication) SetEvent(v string) *Publication

SetEvent sets the Event field's value.

func (*Publication) SetSchema ¶ added in v1.45.17

func (s *Publication) SetSchema(v string) *Publication

SetSchema sets the Schema field's value.

func (Publication) String ¶ added in v1.45.17

func (s Publication) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*Publication) Validate ¶ added in v1.45.17

func (s *Publication) Validate() error

Validate inspects the fields of the type to determine if they are valid.

func (*ResourceNotFoundException) Code ¶

func (s *ResourceNotFoundException) Code() string

Code returns the exception type name.

func (*ResourceNotFoundException) Error ¶

func (s *ResourceNotFoundException) Error() string

func (ResourceNotFoundException) GoString ¶

func (s ResourceNotFoundException) GoString() string

GoString returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ResourceNotFoundException) Message ¶

func (s *ResourceNotFoundException) Message() string

Message returns the exception's message.

func (*ResourceNotFoundException) OrigErr ¶

func (s *ResourceNotFoundException) OrigErr() error

OrigErr always returns nil, satisfies awserr.Error interface.

func (*ResourceNotFoundException) RequestID ¶

func (s *ResourceNotFoundException) RequestID() string

RequestID returns the service's response RequestID for request.

func (*ResourceNotFoundException) StatusCode ¶

func (s *ResourceNotFoundException) StatusCode() int

Status code returns the HTTP status code for the request's response error.

func (ResourceNotFoundException) String ¶

func (s ResourceNotFoundException) String() string

String returns the string representation.

API parameter values that are decorated as "sensitive" in the API will not be included in the string output. The member name will be present, but the value will be replaced with "sensitive".

func (*ResourceQuotaExceededException) Code ¶