Documentation
¶
Overview ¶
Package patchfile implements a robust patchfile format for directory trees.
Patchfile format ¶
A Codechain patchfile is a UTF-8 encoded file split into newline separated lines. It starts with the following line which defines the patchfile version:
codechain patchfile version 1
The second line gives the tree hash (see tree package) of the directory tree the patchfile applies to (example):
treehash 5998c63aca42e471297c0fa353538a93d4d4cfafe9a672df6989e694188b4a92
The main body of the patch file encodes file deletions, file additions, and file diffs. A file deletion is encoded as follows (example):
- f 927d2cae58bb53cdd087bb7178afeff9dab8ec1691cbd01aeccae62559da2791 gopher.png
The '-' denotes a deletion. The other three entries are the same as file entries of tree lists (see tree package).
A file addition is encoded as follows (example):
- f ad125cc5c1fb680be130908a0838ca2235db04285bcdd29e8e25087927e7dd0d hello.go
The '+' denotes an addition. The other three entries are the same as file entries of tree lists (see tree package).
After an addition the actual patch must follow, either in "dmppatch" (for UTF-8 files) or in "ascii85" format (for binary files). The "dmppatch" file format looks like the following (example):
dmppatch 2 @@ -0,0 +1,78 @@ +package main%0A%0Aimport (%0A%09%22fmt%22%0A)%0A%0Afunc main() %7B%0A%09fmt.Println(%22hello world!%22)%0A%7D%0A
The number after "dmppatch" denotes the number of lines following containing the actual UTF-8 patch.
The "ascii85" file format looks like the following (example):
ascii85 2 +,^C)8Mp-E!!DW60b/e#'ElcGar]O1ZH.;>ZnWJO:iLd/`5G7uXPR`iQmq0B\]npD=)8AK4gPQFI-+W_ >oidmeIj`.fgNufo<4MB5*&XfkqnCOo9\::*WQ0?z!!*#^!R=9-%KImW!!
The number after "ascii85" denotes the number of lines following containing the actual binary encoding. "ascii85" patches are not real patches, but always encode the entire binary file.
A file diff is encoded as follows (example):
- f ad125cc5c1fb680be130908a0838ca2235db04285bcdd29e8e25087927e7dd0d hello.go
- f 1b239e494fa201667627de82f0e4dc27b7b00b6ec06146e4d062730bf3762141 hello.go
As with file additions, after a file diff the actual patch must follow, either in "dmppatch" or "ascii85" format (see above), if the file hash changed. That is, if just the file mode changed and the file hash stayed the same no patch must follow.
File diffs are only used if the file names ("hello.go" in the example above) are the same. File moves are implemented as a file deletion and a file addition.
The last line in a patchfile must be the tree hash of the directory tree after the patchfile has been applied (example):
treehash e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855
Patchfiles are optimized for robustness, not for compactness or human readability (although the human readability is reasonable). A complete example containing a single UTF-8 file addition:
codechain patchfile version 1 treehash e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855 + f ad125cc5c1fb680be130908a0838ca2235db04285bcdd29e8e25087927e7dd0d hello.go dmppatch 2 @@ -0,0 +1,78 @@ +package main%0A%0Aimport (%0A%09%22fmt%22%0A)%0A%0Afunc main() %7B%0A%09fmt.Println(%22hello world!%22)%0A%7D%0A treehash 5998c63aca42e471297c0fa353538a93d4d4cfafe9a672df6989e694188b4a92
Diff function specification ¶
Given the patchfile format described above, a Diff function that computes a patch file for two directory trees rooted at A and B is straightforward to implement:
Calculate tree lists LIST_A and LIST_B (in lexical order) for A and B.
Compare the file names NAME_A and NAME_B (lexicographically) of the first two entries in LIST_A and LIST_B:
- If NAME_A < NAME_B: File delete NAME_A, remove it from LIST_A, goto 2. - If NAME_A > NAME_B: File add NAME_B, remove it from LIST_B, goto 2. - If NAME_A == NAME_B: - If file mode or file hash of files NAME_A and NAME_B differ: file diff. - Remove NAME_A from LIST_A, NAME_B from LIST_B, and goto 2.
If LIST_A still contains entries while LIST_B is empty, add file deletions for all entries in LIST_A.
If LIST_B still contains entries while LIST_A is empty, add file additions for all entries in LIST_B.
Apply function specification ¶
To apply a patchfile PATCH to a directory DIR we use the following algorithm:
Read first line of of PATCH and make sure it contains a codechain patchfile version we understand.
Read the second line of PATCH, make sure it is a treehash, and compare it with the treehash of DIR (before any patches have been applied).
Read next line of PATCH:
- If it starts with '+': Add file encoded in the following patch. - If it starts with '-': - If the next line starts with '+': - If the file name differ: Delete first file, add second file (with the following patch, which must be either ascii85 or dmppatch). - Otherwise (file names are the same): - If hashes are the same (only file modes differ): Adjust mode. - Otherwise (hashes differ): Apply the following patch, which must be either ascii85 or dmppatch (and adjust mode, if necessary). - Otherwise: Delete file. - If it starts with 'treehash': Goto 4. - Goto 3.
Read the last line of PATCH, make sure it is a treehash, and compare it with the treehash of DIR (after all patches have been applied).
Index ¶
Constants ¶
const Version = 2
Version is the Codechain patchfile version this package produces with Diff and the maximum version it can parse with Apply.
Version 1 was the initial Codechain patchfile version.
Version 2 introduced "utf8file" sections.
Variables ¶
var ErrAddTargetFileExists = errors.New("patchfile: add target file exists already")
ErrAddTargetFileExists is returned if an add target file exists already.
var ErrDiffLinesNegative = errors.New("patchfile: number of lines < 0")
ErrDiffLinesNegative is returned if the number of diff lines is negative.
var ErrDiffLinesNonPositive = errors.New("patchfile: number of lines < 1")
ErrDiffLinesNonPositive is returned if the number of diff lines is non-positive.
var ErrDiffLinesParse = errors.New("patchfile: cannot parse number of diff lines")
ErrDiffLinesParse is returned if the number of diff lines cannot be parsed.
var ErrDiffModeUnknown = errors.New("patchfile: unknown diff modes")
ErrDiffModeUnknown if returned if the diff mode is unknown.
var ErrDiffNotClean = errors.New("patchfile: computed diff is not clean (use patchfile version 2)")
ErrDiffNotClean is returned if no clean diff could be computed.
var ErrFileField0 = errors.New("patchfile: file diff line does not start with '-' or '+'")
ErrFileField0 is returned if the file diff line does not start with '-' or '+'.
var ErrFileField1 = errors.New("patchfile: file diff line does not have mode 'f' or 'x'")
ErrFileField1 is returned if the file diff line does have mode 'f' or 'x'.
var ErrFileFieldsNum = errors.New("patchfile: file diff line does not have 4 space separated fields")
ErrFileFieldsNum is returned if a file diff line does not have 4 space separated fields.
var ErrFileHashMismatchAfter = errors.New("patchfile: file hash does not match after apply")
ErrFileHashMismatchAfter is returned if file hash does not match after apply.
var ErrFileHashMismatchBefore = errors.New("patchfile: file hash does not match before apply")
ErrFileHashMismatchBefore is returned if file hash does not match before apply.
var ErrHeaderFieldsNum = errors.New("patchfile: header does not have 4 space separated fields")
ErrHeaderFieldsNum is returned if the header does not have 4 space separated fields.
var ErrHeaderFieldsText = errors.New("patchfile: header does not start with 'codechain patchfile version'")
ErrHeaderFieldsText is returned if the header does not start with 'codechain patchfile version'.
var ErrHeaderVersion = errors.New("patchfile: version not supported")
ErrHeaderVersion is returned if if the patchfile version is not supported.
var ErrMoveTargetFileExists = errors.New("patchfile: move target file exists already")
ErrMoveTargetFileExists is returned if a move target file exists already.
var ErrNoDifference = errors.New("patchfile: directory trees do not differ")
ErrNoDifference is returned if the two directory trees Apply has been called have the same tree hash.
var ErrNotTerminal = errors.New("patchfile: more input read after terminal state")
ErrNotTerminal is returned if more input is read after terminal state.
var ErrPrematureDiffEnd = errors.New("patchfile: diff ends prematurely")
ErrPrematureDiffEnd is returned if a diff ends prematurely.
var ErrPrematurePatchfileEnd = errors.New("patchfile: ends prematurely")
ErrPrematurePatchfileEnd is returned if a patchfile ends prematurely.
var ErrTreeHashFieldsNum = errors.New("patchfile: treehash does not have 2 space separated fields")
ErrTreeHashFieldsNum is returned if the tree hash does not have 2 space separated fields.
var ErrTreeHashFieldsText = errors.New("patchfile: treehash line does not start with 'treehash'")
ErrTreeHashFieldsText is returned if the tree hash does not start with 'codechain patchfile version'.
var ErrTreeHashFinishMismatch = errors.New("patchfile: directory tree hash does not match treehash finish line")
ErrTreeHashFinishMismatch is returned if directory tree hash does not match the one given in the treehash finish line.
var ErrTreeHashStartMismatch = errors.New("patchfile: directory tree hash does not match treehash start line")
ErrTreeHashStartMismatch is returned if directory tree hash does not match the one given in the treehash start line.
Functions ¶
func Apply ¶
Apply applies the patch read from r to the directory tree dir. The paths given in excludePaths are excluded from all tree hash calculations.
func Diff ¶
Diff computes a patch between the directory trees rooted at a and b and writes it to w. If a and b have the same tree hash ErrNoDifference is returned. In case of error, some data might have been written to w already. The paths given in excludePaths are excluded from all tree hash calculations.
Types ¶
This section is empty.
Source Files