cosmosdb

type Account struct {
	pulumi.CustomResourceState

	// The capabilities which should be enabled for this Cosmos DB account. Possible values are `EnableAggregationPipeline`, `EnableCassandra`, `EnableGremlin`, `EnableTable`, `MongoDBv3.4`, and `mongoEnableDocLevelTTL`.
	Capabilities AccountCapabilityArrayOutput `pulumi:"capabilities"`
	// A list of connection strings available for this CosmosDB account. If the kind is `GlobalDocumentDB`, this will be empty.
	ConnectionStrings pulumi.StringArrayOutput `pulumi:"connectionStrings"`
	// Specifies a `consistencyPolicy` resource, used to define the consistency policy for this CosmosDB account.
	ConsistencyPolicy AccountConsistencyPolicyOutput `pulumi:"consistencyPolicy"`
	// Enable automatic fail over for this Cosmos DB account.
	EnableAutomaticFailover pulumi.BoolPtrOutput `pulumi:"enableAutomaticFailover"`
	// Enable multi-master support for this Cosmos DB account.
	EnableMultipleWriteLocations pulumi.BoolPtrOutput `pulumi:"enableMultipleWriteLocations"`
	// The endpoint used to connect to the CosmosDB account.
	Endpoint pulumi.StringOutput `pulumi:"endpoint"`
	// Specifies a `geoLocation` resource, used to define where data should be replicated with the `failoverPriority` 0 specifying the primary location.
	GeoLocations AccountGeoLocationArrayOutput `pulumi:"geoLocations"`
	// CosmosDB Firewall Support: This value specifies the set of IP addresses or IP address ranges in CIDR form to be included as the allowed list of client IP's for a given database account. IP addresses/ranges must be comma separated and must not contain any spaces.
	IpRangeFilter pulumi.StringPtrOutput `pulumi:"ipRangeFilter"`
	// Enables virtual network filtering for this Cosmos DB account.
	IsVirtualNetworkFilterEnabled pulumi.BoolPtrOutput `pulumi:"isVirtualNetworkFilterEnabled"`
	// Specifies the Kind of CosmosDB to create - possible values are `GlobalDocumentDB` and `MongoDB`. Defaults to `GlobalDocumentDB`. Changing this forces a new resource to be created.
	Kind pulumi.StringPtrOutput `pulumi:"kind"`
	// Specifies the supported Azure location where the resource exists. Changing this forces a new resource to be created.
	Location pulumi.StringOutput `pulumi:"location"`
	// Specifies the name of the CosmosDB Account. Changing this forces a new resource to be created.
	Name pulumi.StringOutput `pulumi:"name"`
	// Specifies the Offer Type to use for this CosmosDB Account - currently this can only be set to `Standard`.
	OfferType pulumi.StringOutput `pulumi:"offerType"`
	// The Primary master key for the CosmosDB Account.
	PrimaryMasterKey pulumi.StringOutput `pulumi:"primaryMasterKey"`
	// The Primary read-only master Key for the CosmosDB Account.
	PrimaryReadonlyMasterKey pulumi.StringOutput `pulumi:"primaryReadonlyMasterKey"`
	// A list of read endpoints available for this CosmosDB account.
	ReadEndpoints pulumi.StringArrayOutput `pulumi:"readEndpoints"`
	// The name of the resource group in which the CosmosDB Account is created. Changing this forces a new resource to be created.
	ResourceGroupName pulumi.StringOutput `pulumi:"resourceGroupName"`
	// The Secondary master key for the CosmosDB Account.
	SecondaryMasterKey pulumi.StringOutput `pulumi:"secondaryMasterKey"`
	// The Secondary read-only master key for the CosmosDB Account.
	SecondaryReadonlyMasterKey pulumi.StringOutput `pulumi:"secondaryReadonlyMasterKey"`
	// A mapping of tags to assign to the resource.
	Tags pulumi.StringMapOutput `pulumi:"tags"`
	// Specifies a `virtualNetworkRules` resource, used to define which subnets are allowed to access this CosmosDB account.
	VirtualNetworkRules AccountVirtualNetworkRuleArrayOutput `pulumi:"virtualNetworkRules"`
	// A list of write endpoints available for this CosmosDB account.
	WriteEndpoints pulumi.StringArrayOutput `pulumi:"writeEndpoints"`
}

type AccountArgs struct {
	// The capabilities which should be enabled for this Cosmos DB account. Possible values are `EnableAggregationPipeline`, `EnableCassandra`, `EnableGremlin`, `EnableTable`, `MongoDBv3.4`, and `mongoEnableDocLevelTTL`.
	Capabilities AccountCapabilityArrayInput
	// Specifies a `consistencyPolicy` resource, used to define the consistency policy for this CosmosDB account.
	ConsistencyPolicy AccountConsistencyPolicyInput
	// Enable automatic fail over for this Cosmos DB account.
	EnableAutomaticFailover pulumi.BoolPtrInput
	// Enable multi-master support for this Cosmos DB account.
	EnableMultipleWriteLocations pulumi.BoolPtrInput
	// Specifies a `geoLocation` resource, used to define where data should be replicated with the `failoverPriority` 0 specifying the primary location.
	GeoLocations AccountGeoLocationArrayInput
	// CosmosDB Firewall Support: This value specifies the set of IP addresses or IP address ranges in CIDR form to be included as the allowed list of client IP's for a given database account. IP addresses/ranges must be comma separated and must not contain any spaces.
	IpRangeFilter pulumi.StringPtrInput
	// Enables virtual network filtering for this Cosmos DB account.
	IsVirtualNetworkFilterEnabled pulumi.BoolPtrInput
	// Specifies the Kind of CosmosDB to create - possible values are `GlobalDocumentDB` and `MongoDB`. Defaults to `GlobalDocumentDB`. Changing this forces a new resource to be created.
	Kind pulumi.StringPtrInput
	// Specifies the supported Azure location where the resource exists. Changing this forces a new resource to be created.
	Location pulumi.StringPtrInput
	// Specifies the name of the CosmosDB Account. Changing this forces a new resource to be created.
	Name pulumi.StringPtrInput
	// Specifies the Offer Type to use for this CosmosDB Account - currently this can only be set to `Standard`.
	OfferType pulumi.StringInput
	// The name of the resource group in which the CosmosDB Account is created. Changing this forces a new resource to be created.
	ResourceGroupName pulumi.StringInput
	// A mapping of tags to assign to the resource.
	Tags pulumi.StringMapInput
	// Specifies a `virtualNetworkRules` resource, used to define which subnets are allowed to access this CosmosDB account.
	VirtualNetworkRules AccountVirtualNetworkRuleArrayInput
}

type AccountCapability struct {
	// Specifies the name of the CosmosDB Account. Changing this forces a new resource to be created.
	Name string `pulumi:"name"`
}

type AccountCapabilityArgs struct {
	// Specifies the name of the CosmosDB Account. Changing this forces a new resource to be created.
	Name pulumi.StringInput `pulumi:"name"`
}

type AccountCapabilityArray []AccountCapabilityInput

type AccountCapabilityArrayInput interface {
	pulumi.Input

	ToAccountCapabilityArrayOutput() AccountCapabilityArrayOutput
	ToAccountCapabilityArrayOutputWithContext(context.Context) AccountCapabilityArrayOutput
}

type AccountCapabilityArrayOutput struct{ *pulumi.OutputState }

type AccountCapabilityInput interface {
	pulumi.Input

	ToAccountCapabilityOutput() AccountCapabilityOutput
	ToAccountCapabilityOutputWithContext(context.Context) AccountCapabilityOutput
}

type AccountCapabilityOutput struct{ *pulumi.OutputState }

type AccountConsistencyPolicy struct {
	// The Consistency Level to use for this CosmosDB Account - can be either `BoundedStaleness`, `Eventual`, `Session`, `Strong` or `ConsistentPrefix`.
	ConsistencyLevel string `pulumi:"consistencyLevel"`
	// When used with the Bounded Staleness consistency level, this value represents the time amount of staleness (in seconds) tolerated. Accepted range for this value is `5` - `86400` (1 day). Defaults to `5`. Required when `consistencyLevel` is set to `BoundedStaleness`.
	MaxIntervalInSeconds *int `pulumi:"maxIntervalInSeconds"`
	// When used with the Bounded Staleness consistency level, this value represents the number of stale requests tolerated. Accepted range for this value is `10` – `2147483647`. Defaults to `100`. Required when `consistencyLevel` is set to `BoundedStaleness`.
	MaxStalenessPrefix *int `pulumi:"maxStalenessPrefix"`
}

type AccountConsistencyPolicyArgs struct {
	// The Consistency Level to use for this CosmosDB Account - can be either `BoundedStaleness`, `Eventual`, `Session`, `Strong` or `ConsistentPrefix`.
	ConsistencyLevel pulumi.StringInput `pulumi:"consistencyLevel"`
	// When used with the Bounded Staleness consistency level, this value represents the time amount of staleness (in seconds) tolerated. Accepted range for this value is `5` - `86400` (1 day). Defaults to `5`. Required when `consistencyLevel` is set to `BoundedStaleness`.
	MaxIntervalInSeconds pulumi.IntPtrInput `pulumi:"maxIntervalInSeconds"`
	// When used with the Bounded Staleness consistency level, this value represents the number of stale requests tolerated. Accepted range for this value is `10` – `2147483647`. Defaults to `100`. Required when `consistencyLevel` is set to `BoundedStaleness`.
	MaxStalenessPrefix pulumi.IntPtrInput `pulumi:"maxStalenessPrefix"`
}

type AccountConsistencyPolicyInput interface {
	pulumi.Input

	ToAccountConsistencyPolicyOutput() AccountConsistencyPolicyOutput
	ToAccountConsistencyPolicyOutputWithContext(context.Context) AccountConsistencyPolicyOutput
}

type AccountConsistencyPolicyOutput struct{ *pulumi.OutputState }

type AccountConsistencyPolicyPtrInput interface {
	pulumi.Input

	ToAccountConsistencyPolicyPtrOutput() AccountConsistencyPolicyPtrOutput
	ToAccountConsistencyPolicyPtrOutputWithContext(context.Context) AccountConsistencyPolicyPtrOutput
}

type AccountConsistencyPolicyPtrOutput struct{ *pulumi.OutputState }

type AccountGeoLocation struct {
	// The failover priority of the region. A failover priority of `0` indicates a write region. The maximum value for a failover priority = (total number of regions - 1). Failover priority values must be unique for each of the regions in which the database account exists. Changing this causes the location to be re-provisioned and cannot be changed for the location with failover priority `0`.
	FailoverPriority int `pulumi:"failoverPriority"`
	// The ID of the virtual network subnet.
	Id *string `pulumi:"id"`
	// The name of the Azure region to host replicated data.
	Location string `pulumi:"location"`
	// The string used to generate the document endpoints for this region. If not specified it defaults to `${cosmosdb_account.name}-${location}`. Changing this causes the location to be deleted and re-provisioned and cannot be changed for the location with failover priority `0`.
	Prefix *string `pulumi:"prefix"`
}

type AccountGeoLocationArgs struct {
	// The failover priority of the region. A failover priority of `0` indicates a write region. The maximum value for a failover priority = (total number of regions - 1). Failover priority values must be unique for each of the regions in which the database account exists. Changing this causes the location to be re-provisioned and cannot be changed for the location with failover priority `0`.
	FailoverPriority pulumi.IntInput `pulumi:"failoverPriority"`
	// The ID of the virtual network subnet.
	Id pulumi.StringPtrInput `pulumi:"id"`
	// The name of the Azure region to host replicated data.
	Location pulumi.StringInput `pulumi:"location"`
	// The string used to generate the document endpoints for this region. If not specified it defaults to `${cosmosdb_account.name}-${location}`. Changing this causes the location to be deleted and re-provisioned and cannot be changed for the location with failover priority `0`.
	Prefix pulumi.StringPtrInput `pulumi:"prefix"`
}

type AccountGeoLocationArray []AccountGeoLocationInput

type AccountGeoLocationArrayInput interface {
	pulumi.Input

	ToAccountGeoLocationArrayOutput() AccountGeoLocationArrayOutput
	ToAccountGeoLocationArrayOutputWithContext(context.Context) AccountGeoLocationArrayOutput
}

type AccountGeoLocationArrayOutput struct{ *pulumi.OutputState }

type AccountGeoLocationInput interface {
	pulumi.Input

	ToAccountGeoLocationOutput() AccountGeoLocationOutput
	ToAccountGeoLocationOutputWithContext(context.Context) AccountGeoLocationOutput
}

type AccountGeoLocationOutput struct{ *pulumi.OutputState }

type AccountState struct {
	// The capabilities which should be enabled for this Cosmos DB account. Possible values are `EnableAggregationPipeline`, `EnableCassandra`, `EnableGremlin`, `EnableTable`, `MongoDBv3.4`, and `mongoEnableDocLevelTTL`.
	Capabilities AccountCapabilityArrayInput
	// A list of connection strings available for this CosmosDB account. If the kind is `GlobalDocumentDB`, this will be empty.
	ConnectionStrings pulumi.StringArrayInput
	// Specifies a `consistencyPolicy` resource, used to define the consistency policy for this CosmosDB account.
	ConsistencyPolicy AccountConsistencyPolicyPtrInput
	// Enable automatic fail over for this Cosmos DB account.
	EnableAutomaticFailover pulumi.BoolPtrInput
	// Enable multi-master support for this Cosmos DB account.
	EnableMultipleWriteLocations pulumi.BoolPtrInput
	// The endpoint used to connect to the CosmosDB account.
	Endpoint pulumi.StringPtrInput
	// Specifies a `geoLocation` resource, used to define where data should be replicated with the `failoverPriority` 0 specifying the primary location.
	GeoLocations AccountGeoLocationArrayInput
	// CosmosDB Firewall Support: This value specifies the set of IP addresses or IP address ranges in CIDR form to be included as the allowed list of client IP's for a given database account. IP addresses/ranges must be comma separated and must not contain any spaces.
	IpRangeFilter pulumi.StringPtrInput
	// Enables virtual network filtering for this Cosmos DB account.
	IsVirtualNetworkFilterEnabled pulumi.BoolPtrInput
	// Specifies the Kind of CosmosDB to create - possible values are `GlobalDocumentDB` and `MongoDB`. Defaults to `GlobalDocumentDB`. Changing this forces a new resource to be created.
	Kind pulumi.StringPtrInput
	// Specifies the supported Azure location where the resource exists. Changing this forces a new resource to be created.
	Location pulumi.StringPtrInput
	// Specifies the name of the CosmosDB Account. Changing this forces a new resource to be created.
	Name pulumi.StringPtrInput
	// Specifies the Offer Type to use for this CosmosDB Account - currently this can only be set to `Standard`.
	OfferType pulumi.StringPtrInput
	// The Primary master key for the CosmosDB Account.
	PrimaryMasterKey pulumi.StringPtrInput
	// The Primary read-only master Key for the CosmosDB Account.
	PrimaryReadonlyMasterKey pulumi.StringPtrInput
	// A list of read endpoints available for this CosmosDB account.
	ReadEndpoints pulumi.StringArrayInput
	// The name of the resource group in which the CosmosDB Account is created. Changing this forces a new resource to be created.
	ResourceGroupName pulumi.StringPtrInput
	// The Secondary master key for the CosmosDB Account.
	SecondaryMasterKey pulumi.StringPtrInput
	// The Secondary read-only master key for the CosmosDB Account.
	SecondaryReadonlyMasterKey pulumi.StringPtrInput
	// A mapping of tags to assign to the resource.
	Tags pulumi.StringMapInput
	// Specifies a `virtualNetworkRules` resource, used to define which subnets are allowed to access this CosmosDB account.
	VirtualNetworkRules AccountVirtualNetworkRuleArrayInput
	// A list of write endpoints available for this CosmosDB account.
	WriteEndpoints pulumi.StringArrayInput
}

type AccountVirtualNetworkRule struct {
	// The ID of the virtual network subnet.
	Id string `pulumi:"id"`
}

type AccountVirtualNetworkRuleArgs struct {
	// The ID of the virtual network subnet.
	Id pulumi.StringInput `pulumi:"id"`
}

type AccountVirtualNetworkRuleArray []AccountVirtualNetworkRuleInput

type AccountVirtualNetworkRuleArrayInput interface {
	pulumi.Input

	ToAccountVirtualNetworkRuleArrayOutput() AccountVirtualNetworkRuleArrayOutput
	ToAccountVirtualNetworkRuleArrayOutputWithContext(context.Context) AccountVirtualNetworkRuleArrayOutput
}

type AccountVirtualNetworkRuleArrayOutput struct{ *pulumi.OutputState }

type AccountVirtualNetworkRuleInput interface {
	pulumi.Input

	ToAccountVirtualNetworkRuleOutput() AccountVirtualNetworkRuleOutput
	ToAccountVirtualNetworkRuleOutputWithContext(context.Context) AccountVirtualNetworkRuleOutput
}

type AccountVirtualNetworkRuleOutput struct{ *pulumi.OutputState }

type CassandraKeyspace struct {
	pulumi.CustomResourceState

	// The name of the Cosmos DB Cassandra KeySpace to create the table within. Changing this forces a new resource to be created.
	AccountName pulumi.StringOutput `pulumi:"accountName"`
	// Specifies the name of the Cosmos DB Cassandra KeySpace. Changing this forces a new resource to be created.
	Name pulumi.StringOutput `pulumi:"name"`
	// The name of the resource group in which the Cosmos DB Cassandra KeySpace is created. Changing this forces a new resource to be created.
	ResourceGroupName pulumi.StringOutput `pulumi:"resourceGroupName"`
	// The throughput of Cassandra keyspace (RU/s). Must be set in increments of `100`. The minimum value is `400`. This must be set upon database creation otherwise it cannot be updated without a manual resource destroy-apply.
	Throughput pulumi.IntOutput `pulumi:"throughput"`
}

type CassandraKeyspaceArgs struct {
	// The name of the Cosmos DB Cassandra KeySpace to create the table within. Changing this forces a new resource to be created.
	AccountName pulumi.StringInput
	// Specifies the name of the Cosmos DB Cassandra KeySpace. Changing this forces a new resource to be created.
	Name pulumi.StringPtrInput
	// The name of the resource group in which the Cosmos DB Cassandra KeySpace is created. Changing this forces a new resource to be created.
	ResourceGroupName pulumi.StringInput
	// The throughput of Cassandra keyspace (RU/s). Must be set in increments of `100`. The minimum value is `400`. This must be set upon database creation otherwise it cannot be updated without a manual resource destroy-apply.
	Throughput pulumi.IntPtrInput
}

type CassandraKeyspaceState struct {
	// The name of the Cosmos DB Cassandra KeySpace to create the table within. Changing this forces a new resource to be created.
	AccountName pulumi.StringPtrInput
	// Specifies the name of the Cosmos DB Cassandra KeySpace. Changing this forces a new resource to be created.
	Name pulumi.StringPtrInput
	// The name of the resource group in which the Cosmos DB Cassandra KeySpace is created. Changing this forces a new resource to be created.
	ResourceGroupName pulumi.StringPtrInput
	// The throughput of Cassandra keyspace (RU/s). Must be set in increments of `100`. The minimum value is `400`. This must be set upon database creation otherwise it cannot be updated without a manual resource destroy-apply.
	Throughput pulumi.IntPtrInput
}

type GetAccountCapability struct {
	// Specifies the name of the CosmosDB Account.
	Name string `pulumi:"name"`
}

type GetAccountCapabilityArgs struct {
	// Specifies the name of the CosmosDB Account.
	Name pulumi.StringInput `pulumi:"name"`
}

type GetAccountCapabilityArray []GetAccountCapabilityInput

type GetAccountCapabilityArrayInput interface {
	pulumi.Input

	ToGetAccountCapabilityArrayOutput() GetAccountCapabilityArrayOutput
	ToGetAccountCapabilityArrayOutputWithContext(context.Context) GetAccountCapabilityArrayOutput
}

type GetAccountCapabilityArrayOutput struct{ *pulumi.OutputState }

type GetAccountCapabilityInput interface {
	pulumi.Input

	ToGetAccountCapabilityOutput() GetAccountCapabilityOutput
	ToGetAccountCapabilityOutputWithContext(context.Context) GetAccountCapabilityOutput
}

type GetAccountCapabilityOutput struct{ *pulumi.OutputState }

type GetAccountConsistencyPolicy struct {
	// The Consistency Level used by this CosmosDB Account.
	ConsistencyLevel string `pulumi:"consistencyLevel"`
	// The amount of staleness (in seconds) tolerated when the consistency level is Bounded Staleness.
	MaxIntervalInSeconds int `pulumi:"maxIntervalInSeconds"`
	// The number of stale requests tolerated when the consistency level is Bounded Staleness.
	MaxStalenessPrefix int `pulumi:"maxStalenessPrefix"`
}

type GetAccountConsistencyPolicyArgs struct {
	// The Consistency Level used by this CosmosDB Account.
	ConsistencyLevel pulumi.StringInput `pulumi:"consistencyLevel"`
	// The amount of staleness (in seconds) tolerated when the consistency level is Bounded Staleness.
	MaxIntervalInSeconds pulumi.IntInput `pulumi:"maxIntervalInSeconds"`
	// The number of stale requests tolerated when the consistency level is Bounded Staleness.
	MaxStalenessPrefix pulumi.IntInput `pulumi:"maxStalenessPrefix"`
}

type GetAccountConsistencyPolicyArray []GetAccountConsistencyPolicyInput

type GetAccountConsistencyPolicyArrayInput interface {
	pulumi.Input

	ToGetAccountConsistencyPolicyArrayOutput() GetAccountConsistencyPolicyArrayOutput
	ToGetAccountConsistencyPolicyArrayOutputWithContext(context.Context) GetAccountConsistencyPolicyArrayOutput
}

type GetAccountConsistencyPolicyArrayOutput struct{ *pulumi.OutputState }

type GetAccountConsistencyPolicyInput interface {
	pulumi.Input

	ToGetAccountConsistencyPolicyOutput() GetAccountConsistencyPolicyOutput
	ToGetAccountConsistencyPolicyOutputWithContext(context.Context) GetAccountConsistencyPolicyOutput
}

type GetAccountConsistencyPolicyOutput struct{ *pulumi.OutputState }

type GetAccountGeoLocation struct {
	FailoverPriority int `pulumi:"failoverPriority"`
	// The ID of the virtual network subnet.
	Id string `pulumi:"id"`
	// The name of the Azure region hosting replicated data.
	Location string `pulumi:"location"`
}

type GetAccountGeoLocationArgs struct {
	FailoverPriority pulumi.IntInput `pulumi:"failoverPriority"`
	// The ID of the virtual network subnet.
	Id pulumi.StringInput `pulumi:"id"`
	// The name of the Azure region hosting replicated data.
	Location pulumi.StringInput `pulumi:"location"`
}

type GetAccountGeoLocationArray []GetAccountGeoLocationInput

type GetAccountGeoLocationArrayInput interface {
	pulumi.Input

	ToGetAccountGeoLocationArrayOutput() GetAccountGeoLocationArrayOutput
	ToGetAccountGeoLocationArrayOutputWithContext(context.Context) GetAccountGeoLocationArrayOutput
}

type GetAccountGeoLocationArrayOutput struct{ *pulumi.OutputState }

type GetAccountGeoLocationInput interface {
	pulumi.Input

	ToGetAccountGeoLocationOutput() GetAccountGeoLocationOutput
	ToGetAccountGeoLocationOutputWithContext(context.Context) GetAccountGeoLocationOutput
}

type GetAccountGeoLocationOutput struct{ *pulumi.OutputState }

type GetAccountVirtualNetworkRule struct {
	// The ID of the virtual network subnet.
	Id string `pulumi:"id"`
}

type GetAccountVirtualNetworkRuleArgs struct {
	// The ID of the virtual network subnet.
	Id pulumi.StringInput `pulumi:"id"`
}

type GetAccountVirtualNetworkRuleArray []GetAccountVirtualNetworkRuleInput

type GetAccountVirtualNetworkRuleArrayInput interface {
	pulumi.Input

	ToGetAccountVirtualNetworkRuleArrayOutput() GetAccountVirtualNetworkRuleArrayOutput
	ToGetAccountVirtualNetworkRuleArrayOutputWithContext(context.Context) GetAccountVirtualNetworkRuleArrayOutput
}

type GetAccountVirtualNetworkRuleArrayOutput struct{ *pulumi.OutputState }

type GetAccountVirtualNetworkRuleInput interface {
	pulumi.Input

	ToGetAccountVirtualNetworkRuleOutput() GetAccountVirtualNetworkRuleOutput
	ToGetAccountVirtualNetworkRuleOutputWithContext(context.Context) GetAccountVirtualNetworkRuleOutput
}

type GetAccountVirtualNetworkRuleOutput struct{ *pulumi.OutputState }

type GremlinDatabase struct {
	pulumi.CustomResourceState

	// The name of the CosmosDB Account to create the Gremlin Database within. Changing this forces a new resource to be created.
	AccountName pulumi.StringOutput `pulumi:"accountName"`
	// Specifies the name of the Cosmos DB Gremlin Database. Changing this forces a new resource to be created.
	Name pulumi.StringOutput `pulumi:"name"`
	// The name of the resource group in which the Cosmos DB Gremlin Database is created. Changing this forces a new resource to be created.
	ResourceGroupName pulumi.StringOutput `pulumi:"resourceGroupName"`
	// The throughput of the Gremlin database (RU/s). Must be set in increments of `100`. The minimum value is `400`. This must be set upon database creation otherwise it cannot be updated without a manual resource destroy-apply.
	Throughput pulumi.IntOutput `pulumi:"throughput"`
}

type GremlinDatabaseArgs struct {
	// The name of the CosmosDB Account to create the Gremlin Database within. Changing this forces a new resource to be created.
	AccountName pulumi.StringInput
	// Specifies the name of the Cosmos DB Gremlin Database. Changing this forces a new resource to be created.
	Name pulumi.StringPtrInput
	// The name of the resource group in which the Cosmos DB Gremlin Database is created. Changing this forces a new resource to be created.
	ResourceGroupName pulumi.StringInput
	// The throughput of the Gremlin database (RU/s). Must be set in increments of `100`. The minimum value is `400`. This must be set upon database creation otherwise it cannot be updated without a manual resource destroy-apply.
	Throughput pulumi.IntPtrInput
}

type GremlinDatabaseState struct {
	// The name of the CosmosDB Account to create the Gremlin Database within. Changing this forces a new resource to be created.
	AccountName pulumi.StringPtrInput
	// Specifies the name of the Cosmos DB Gremlin Database. Changing this forces a new resource to be created.
	Name pulumi.StringPtrInput
	// The name of the resource group in which the Cosmos DB Gremlin Database is created. Changing this forces a new resource to be created.
	ResourceGroupName pulumi.StringPtrInput
	// The throughput of the Gremlin database (RU/s). Must be set in increments of `100`. The minimum value is `400`. This must be set upon database creation otherwise it cannot be updated without a manual resource destroy-apply.
	Throughput pulumi.IntPtrInput
}

type GremlinGraph struct {
	pulumi.CustomResourceState

	// The name of the CosmosDB Account to create the Gremlin Graph within. Changing this forces a new resource to be created.
	AccountName pulumi.StringOutput `pulumi:"accountName"`
	// The conflict resolution policy for the graph. One or more `conflictResolutionPolicy` blocks as defined below. Changing this forces a new resource to be created.
	ConflictResolutionPolicies GremlinGraphConflictResolutionPolicyArrayOutput `pulumi:"conflictResolutionPolicies"`
	// The name of the Cosmos DB Graph Database in which the Cosmos DB Gremlin Graph is created. Changing this forces a new resource to be created.
	DatabaseName pulumi.StringOutput `pulumi:"databaseName"`
	// The configuration of the indexing policy. One or more `indexPolicy` blocks as defined below. Changing this forces a new resource to be created.
	IndexPolicies GremlinGraphIndexPolicyArrayOutput `pulumi:"indexPolicies"`
	// Specifies the name of the Cosmos DB Gremlin Graph. Changing this forces a new resource to be created.
	Name pulumi.StringOutput `pulumi:"name"`
	// Define a partition key. Changing this forces a new resource to be created.
	PartitionKeyPath pulumi.StringPtrOutput `pulumi:"partitionKeyPath"`
	// The name of the resource group in which the Cosmos DB Gremlin Graph is created. Changing this forces a new resource to be created.
	ResourceGroupName pulumi.StringOutput `pulumi:"resourceGroupName"`
	// The throughput of the Gremlin database (RU/s). Must be set in increments of `100`. The minimum value is `400`. This must be set upon database creation otherwise it cannot be updated without a manual resource destroy-apply.
	Throughput pulumi.IntOutput `pulumi:"throughput"`
	// One or more `uniqueKey` blocks as defined below. Changing this forces a new resource to be created.
	UniqueKeys GremlinGraphUniqueKeyArrayOutput `pulumi:"uniqueKeys"`
}

type GremlinGraphArgs struct {
	// The name of the CosmosDB Account to create the Gremlin Graph within. Changing this forces a new resource to be created.
	AccountName pulumi.StringInput
	// The conflict resolution policy for the graph. One or more `conflictResolutionPolicy` blocks as defined below. Changing this forces a new resource to be created.
	ConflictResolutionPolicies GremlinGraphConflictResolutionPolicyArrayInput
	// The name of the Cosmos DB Graph Database in which the Cosmos DB Gremlin Graph is created. Changing this forces a new resource to be created.
	DatabaseName pulumi.StringInput
	// The configuration of the indexing policy. One or more `indexPolicy` blocks as defined below. Changing this forces a new resource to be created.
	IndexPolicies GremlinGraphIndexPolicyArrayInput
	// Specifies the name of the Cosmos DB Gremlin Graph. Changing this forces a new resource to be created.
	Name pulumi.StringPtrInput
	// Define a partition key. Changing this forces a new resource to be created.
	PartitionKeyPath pulumi.StringPtrInput
	// The name of the resource group in which the Cosmos DB Gremlin Graph is created. Changing this forces a new resource to be created.
	ResourceGroupName pulumi.StringInput
	// The throughput of the Gremlin database (RU/s). Must be set in increments of `100`. The minimum value is `400`. This must be set upon database creation otherwise it cannot be updated without a manual resource destroy-apply.
	Throughput pulumi.IntPtrInput
	// One or more `uniqueKey` blocks as defined below. Changing this forces a new resource to be created.
	UniqueKeys GremlinGraphUniqueKeyArrayInput
}

type GremlinGraphConflictResolutionPolicy struct {
	// The conflict resolution path in the case of LastWriterWins mode.
	ConflictResolutionPath *string `pulumi:"conflictResolutionPath"`
	// The procedure to resolve conflicts in the case of custom mode.
	ConflictResolutionProcedure *string `pulumi:"conflictResolutionProcedure"`
	// Indicates the conflict resolution mode. Possible values include: `LastWriterWins`, `Custom`.
	Mode string `pulumi:"mode"`
}

type GremlinGraphConflictResolutionPolicyArgs struct {
	// The conflict resolution path in the case of LastWriterWins mode.
	ConflictResolutionPath pulumi.StringPtrInput `pulumi:"conflictResolutionPath"`
	// The procedure to resolve conflicts in the case of custom mode.
	ConflictResolutionProcedure pulumi.StringPtrInput `pulumi:"conflictResolutionProcedure"`
	// Indicates the conflict resolution mode. Possible values include: `LastWriterWins`, `Custom`.
	Mode pulumi.StringInput `pulumi:"mode"`
}

type GremlinGraphConflictResolutionPolicyArray []GremlinGraphConflictResolutionPolicyInput

type GremlinGraphConflictResolutionPolicyArrayInput interface {
	pulumi.Input

	ToGremlinGraphConflictResolutionPolicyArrayOutput() GremlinGraphConflictResolutionPolicyArrayOutput
	ToGremlinGraphConflictResolutionPolicyArrayOutputWithContext(context.Context) GremlinGraphConflictResolutionPolicyArrayOutput
}

type GremlinGraphConflictResolutionPolicyArrayOutput struct{ *pulumi.OutputState }

type GremlinGraphConflictResolutionPolicyInput interface {
	pulumi.Input

	ToGremlinGraphConflictResolutionPolicyOutput() GremlinGraphConflictResolutionPolicyOutput
	ToGremlinGraphConflictResolutionPolicyOutputWithContext(context.Context) GremlinGraphConflictResolutionPolicyOutput
}

type GremlinGraphConflictResolutionPolicyOutput struct{ *pulumi.OutputState }

type GremlinGraphIndexPolicy struct {
	// Indicates if the indexing policy is automatic. Defaults to `true`.
	Automatic *bool `pulumi:"automatic"`
	// List of paths to exclude from indexing. Required if `indexingMode` is `Consistent` or `Lazy`.
	ExcludedPaths []string `pulumi:"excludedPaths"`
	// List of paths to include in the indexing. Required if `indexingMode` is `Consistent` or `Lazy`.
	IncludedPaths []string `pulumi:"includedPaths"`
	// Indicates the indexing mode. Possible values include: `Consistent`, `Lazy`, `None`.
	IndexingMode string `pulumi:"indexingMode"`
}

type GremlinGraphIndexPolicyArgs struct {
	// Indicates if the indexing policy is automatic. Defaults to `true`.
	Automatic pulumi.BoolPtrInput `pulumi:"automatic"`
	// List of paths to exclude from indexing. Required if `indexingMode` is `Consistent` or `Lazy`.
	ExcludedPaths pulumi.StringArrayInput `pulumi:"excludedPaths"`
	// List of paths to include in the indexing. Required if `indexingMode` is `Consistent` or `Lazy`.
	IncludedPaths pulumi.StringArrayInput `pulumi:"includedPaths"`
	// Indicates the indexing mode. Possible values include: `Consistent`, `Lazy`, `None`.
	IndexingMode pulumi.StringInput `pulumi:"indexingMode"`
}

type GremlinGraphIndexPolicyArray []GremlinGraphIndexPolicyInput

type GremlinGraphIndexPolicyArrayInput interface {
	pulumi.Input

	ToGremlinGraphIndexPolicyArrayOutput() GremlinGraphIndexPolicyArrayOutput
	ToGremlinGraphIndexPolicyArrayOutputWithContext(context.Context) GremlinGraphIndexPolicyArrayOutput
}

type GremlinGraphIndexPolicyArrayOutput struct{ *pulumi.OutputState }

type GremlinGraphIndexPolicyInput interface {
	pulumi.Input

	ToGremlinGraphIndexPolicyOutput() GremlinGraphIndexPolicyOutput
	ToGremlinGraphIndexPolicyOutputWithContext(context.Context) GremlinGraphIndexPolicyOutput
}

type GremlinGraphIndexPolicyOutput struct{ *pulumi.OutputState }

type GremlinGraphState struct {
	// The name of the CosmosDB Account to create the Gremlin Graph within. Changing this forces a new resource to be created.
	AccountName pulumi.StringPtrInput
	// The conflict resolution policy for the graph. One or more `conflictResolutionPolicy` blocks as defined below. Changing this forces a new resource to be created.
	ConflictResolutionPolicies GremlinGraphConflictResolutionPolicyArrayInput
	// The name of the Cosmos DB Graph Database in which the Cosmos DB Gremlin Graph is created. Changing this forces a new resource to be created.
	DatabaseName pulumi.StringPtrInput
	// The configuration of the indexing policy. One or more `indexPolicy` blocks as defined below. Changing this forces a new resource to be created.
	IndexPolicies GremlinGraphIndexPolicyArrayInput
	// Specifies the name of the Cosmos DB Gremlin Graph. Changing this forces a new resource to be created.
	Name pulumi.StringPtrInput
	// Define a partition key. Changing this forces a new resource to be created.
	PartitionKeyPath pulumi.StringPtrInput
	// The name of the resource group in which the Cosmos DB Gremlin Graph is created. Changing this forces a new resource to be created.
	ResourceGroupName pulumi.StringPtrInput
	// The throughput of the Gremlin database (RU/s). Must be set in increments of `100`. The minimum value is `400`. This must be set upon database creation otherwise it cannot be updated without a manual resource destroy-apply.
	Throughput pulumi.IntPtrInput
	// One or more `uniqueKey` blocks as defined below. Changing this forces a new resource to be created.
	UniqueKeys GremlinGraphUniqueKeyArrayInput
}

type GremlinGraphUniqueKey struct {
	// A list of paths to use for this unique key.
	Paths []string `pulumi:"paths"`
}

type GremlinGraphUniqueKeyArgs struct {
	// A list of paths to use for this unique key.
	Paths pulumi.StringArrayInput `pulumi:"paths"`
}

type GremlinGraphUniqueKeyArray []GremlinGraphUniqueKeyInput

type GremlinGraphUniqueKeyArrayInput interface {
	pulumi.Input

	ToGremlinGraphUniqueKeyArrayOutput() GremlinGraphUniqueKeyArrayOutput
	ToGremlinGraphUniqueKeyArrayOutputWithContext(context.Context) GremlinGraphUniqueKeyArrayOutput
}

type GremlinGraphUniqueKeyArrayOutput struct{ *pulumi.OutputState }

type GremlinGraphUniqueKeyInput interface {
	pulumi.Input

	ToGremlinGraphUniqueKeyOutput() GremlinGraphUniqueKeyOutput
	ToGremlinGraphUniqueKeyOutputWithContext(context.Context) GremlinGraphUniqueKeyOutput
}

type GremlinGraphUniqueKeyOutput struct{ *pulumi.OutputState }

type LookupAccountArgs struct {
	// Specifies the name of the CosmosDB Account.
	Name string `pulumi:"name"`
	// Specifies the name of the resource group in which the CosmosDB Account resides.
	ResourceGroupName string `pulumi:"resourceGroupName"`
}

type LookupAccountResult struct {
	// Capabilities enabled on this Cosmos DB account.
	Capabilities        []GetAccountCapability        `pulumi:"capabilities"`
	ConsistencyPolicies []GetAccountConsistencyPolicy `pulumi:"consistencyPolicies"`
	// If automatic failover is enabled for this CosmosDB Account.
	EnableAutomaticFailover bool `pulumi:"enableAutomaticFailover"`
	// If multi-master is enabled for this Cosmos DB account.
	EnableMultipleWriteLocations bool `pulumi:"enableMultipleWriteLocations"`
	// The endpoint used to connect to the CosmosDB account.
	Endpoint     string                  `pulumi:"endpoint"`
	GeoLocations []GetAccountGeoLocation `pulumi:"geoLocations"`
	// id is the provider-assigned unique ID for this managed resource.
	Id string `pulumi:"id"`
	// The current IP Filter for this CosmosDB account
	IpRangeFilter string `pulumi:"ipRangeFilter"`
	// If virtual network filtering is enabled for this Cosmos DB account.
	IsVirtualNetworkFilterEnabled bool `pulumi:"isVirtualNetworkFilterEnabled"`
	// The Kind of the CosmosDB account.
	Kind string `pulumi:"kind"`
	// The name of the Azure region hosting replicated data.
	Location string `pulumi:"location"`
	Name     string `pulumi:"name"`
	// The Offer Type to used by this CosmosDB Account.
	OfferType string `pulumi:"offerType"`
	// The Primary master key for the CosmosDB Account.
	PrimaryMasterKey string `pulumi:"primaryMasterKey"`
	// The Primary read-only master Key for the CosmosDB Account.
	PrimaryReadonlyMasterKey string `pulumi:"primaryReadonlyMasterKey"`
	// A list of read endpoints available for this CosmosDB account.
	ReadEndpoints     []string `pulumi:"readEndpoints"`
	ResourceGroupName string   `pulumi:"resourceGroupName"`
	// The Secondary master key for the CosmosDB Account.
	SecondaryMasterKey string `pulumi:"secondaryMasterKey"`
	// The Secondary read-only master key for the CosmosDB Account.
	SecondaryReadonlyMasterKey string `pulumi:"secondaryReadonlyMasterKey"`
	// A mapping of tags assigned to the resource.
	Tags map[string]string `pulumi:"tags"`
	// Subnets that are allowed to access this CosmosDB account.
	VirtualNetworkRules []GetAccountVirtualNetworkRule `pulumi:"virtualNetworkRules"`
	// A list of write endpoints available for this CosmosDB account.
	WriteEndpoints []string `pulumi:"writeEndpoints"`
}

type MongoCollection struct {
	pulumi.CustomResourceState

	AccountName pulumi.StringOutput `pulumi:"accountName"`
	// The name of the Cosmos DB Mongo Database in which the Cosmos DB Mongo Collection is created. Changing this forces a new resource to be created.
	DatabaseName pulumi.StringOutput `pulumi:"databaseName"`
	// The default Time To Live in seconds. If the value is `0` items are not automatically expired.
	DefaultTtlSeconds pulumi.IntPtrOutput `pulumi:"defaultTtlSeconds"`
	// Specifies the name of the Cosmos DB Mongo Collection. Changing this forces a new resource to be created.
	Name pulumi.StringOutput `pulumi:"name"`
	// The name of the resource group in which the Cosmos DB Mongo Collection is created. Changing this forces a new resource to be created.
	ResourceGroupName pulumi.StringOutput `pulumi:"resourceGroupName"`
	// The name of the key to partition on for sharding. There must not be any other unique index keys.
	ShardKey pulumi.StringPtrOutput `pulumi:"shardKey"`
	// The throughput of the MongoDB collection (RU/s). Must be set in increments of `100`. The minimum value is `400`. This must be set upon database creation otherwise it cannot be updated without a manual resource destroy-apply.
	Throughput pulumi.IntOutput `pulumi:"throughput"`
}

type MongoCollectionArgs struct {
	AccountName pulumi.StringInput
	// The name of the Cosmos DB Mongo Database in which the Cosmos DB Mongo Collection is created. Changing this forces a new resource to be created.
	DatabaseName pulumi.StringInput
	// The default Time To Live in seconds. If the value is `0` items are not automatically expired.
	DefaultTtlSeconds pulumi.IntPtrInput
	// Specifies the name of the Cosmos DB Mongo Collection. Changing this forces a new resource to be created.
	Name pulumi.StringPtrInput
	// The name of the resource group in which the Cosmos DB Mongo Collection is created. Changing this forces a new resource to be created.
	ResourceGroupName pulumi.StringInput
	// The name of the key to partition on for sharding. There must not be any other unique index keys.
	ShardKey pulumi.StringPtrInput
	// The throughput of the MongoDB collection (RU/s). Must be set in increments of `100`. The minimum value is `400`. This must be set upon database creation otherwise it cannot be updated without a manual resource destroy-apply.
	Throughput pulumi.IntPtrInput
}

type MongoCollectionState struct {
	AccountName pulumi.StringPtrInput
	// The name of the Cosmos DB Mongo Database in which the Cosmos DB Mongo Collection is created. Changing this forces a new resource to be created.
	DatabaseName pulumi.StringPtrInput
	// The default Time To Live in seconds. If the value is `0` items are not automatically expired.
	DefaultTtlSeconds pulumi.IntPtrInput
	// Specifies the name of the Cosmos DB Mongo Collection. Changing this forces a new resource to be created.
	Name pulumi.StringPtrInput
	// The name of the resource group in which the Cosmos DB Mongo Collection is created. Changing this forces a new resource to be created.
	ResourceGroupName pulumi.StringPtrInput
	// The name of the key to partition on for sharding. There must not be any other unique index keys.
	ShardKey pulumi.StringPtrInput
	// The throughput of the MongoDB collection (RU/s). Must be set in increments of `100`. The minimum value is `400`. This must be set upon database creation otherwise it cannot be updated without a manual resource destroy-apply.
	Throughput pulumi.IntPtrInput
}

type MongoDatabase struct {
	pulumi.CustomResourceState

	// The name of the Cosmos DB Mongo Database to create the table within. Changing this forces a new resource to be created.
	AccountName pulumi.StringOutput `pulumi:"accountName"`
	// Specifies the name of the Cosmos DB Mongo Database. Changing this forces a new resource to be created.
	Name pulumi.StringOutput `pulumi:"name"`
	// The name of the resource group in which the Cosmos DB Mongo Database is created. Changing this forces a new resource to be created.
	ResourceGroupName pulumi.StringOutput `pulumi:"resourceGroupName"`
	// The throughput of the MongoDB collection (RU/s). Must be set in increments of `100`. The minimum value is `400`. This must be set upon database creation otherwise it cannot be updated without a manual resource destroy-apply.
	Throughput pulumi.IntOutput `pulumi:"throughput"`
}

type MongoDatabaseArgs struct {
	// The name of the Cosmos DB Mongo Database to create the table within. Changing this forces a new resource to be created.
	AccountName pulumi.StringInput
	// Specifies the name of the Cosmos DB Mongo Database. Changing this forces a new resource to be created.
	Name pulumi.StringPtrInput
	// The name of the resource group in which the Cosmos DB Mongo Database is created. Changing this forces a new resource to be created.
	ResourceGroupName pulumi.StringInput
	// The throughput of the MongoDB collection (RU/s). Must be set in increments of `100`. The minimum value is `400`. This must be set upon database creation otherwise it cannot be updated without a manual resource destroy-apply.
	Throughput pulumi.IntPtrInput
}

type MongoDatabaseState struct {
	// The name of the Cosmos DB Mongo Database to create the table within. Changing this forces a new resource to be created.
	AccountName pulumi.StringPtrInput
	// Specifies the name of the Cosmos DB Mongo Database. Changing this forces a new resource to be created.
	Name pulumi.StringPtrInput
	// The name of the resource group in which the Cosmos DB Mongo Database is created. Changing this forces a new resource to be created.
	ResourceGroupName pulumi.StringPtrInput
	// The throughput of the MongoDB collection (RU/s). Must be set in increments of `100`. The minimum value is `400`. This must be set upon database creation otherwise it cannot be updated without a manual resource destroy-apply.
	Throughput pulumi.IntPtrInput
}

type SqlContainer struct {
	pulumi.CustomResourceState

	// The name of the Cosmos DB Account to create the container within. Changing this forces a new resource to be created.
	AccountName pulumi.StringOutput `pulumi:"accountName"`
	// The name of the Cosmos DB SQL Database to create the container within. Changing this forces a new resource to be created.
	DatabaseName pulumi.StringOutput `pulumi:"databaseName"`
	// The default time to live of SQL container. If missing, items are not expired automatically. If present and the value is set to `-1`, it is equal to infinity, and items don’t expire by default. If present and the value is set to some number `n` – items will expire `n` seconds after their last modified time.
	DefaultTtl pulumi.IntOutput `pulumi:"defaultTtl"`
	// Specifies the name of the Cosmos DB SQL Database. Changing this forces a new resource to be created.
	Name pulumi.StringOutput `pulumi:"name"`
	// Define a partition key. Changing this forces a new resource to be created.
	PartitionKeyPath pulumi.StringPtrOutput `pulumi:"partitionKeyPath"`
	// The name of the resource group in which the Cosmos DB SQL Database is created. Changing this forces a new resource to be created.
	ResourceGroupName pulumi.StringOutput `pulumi:"resourceGroupName"`
	// The throughput of SQL container (RU/s). Must be set in increments of `100`. The minimum value is `400`. This must be set upon container creation otherwise it cannot be updated without a manual resource destroy-apply.
	Throughput pulumi.IntOutput `pulumi:"throughput"`
	// One or more `uniqueKey` blocks as defined below. Changing this forces a new resource to be created.
	UniqueKeys SqlContainerUniqueKeyArrayOutput `pulumi:"uniqueKeys"`
}

type SqlContainerArgs struct {
	// The name of the Cosmos DB Account to create the container within. Changing this forces a new resource to be created.
	AccountName pulumi.StringInput
	// The name of the Cosmos DB SQL Database to create the container within. Changing this forces a new resource to be created.
	DatabaseName pulumi.StringInput
	// The default time to live of SQL container. If missing, items are not expired automatically. If present and the value is set to `-1`, it is equal to infinity, and items don’t expire by default. If present and the value is set to some number `n` – items will expire `n` seconds after their last modified time.
	DefaultTtl pulumi.IntPtrInput
	// Specifies the name of the Cosmos DB SQL Database. Changing this forces a new resource to be created.
	Name pulumi.StringPtrInput
	// Define a partition key. Changing this forces a new resource to be created.
	PartitionKeyPath pulumi.StringPtrInput
	// The name of the resource group in which the Cosmos DB SQL Database is created. Changing this forces a new resource to be created.
	ResourceGroupName pulumi.StringInput
	// The throughput of SQL container (RU/s). Must be set in increments of `100`. The minimum value is `400`. This must be set upon container creation otherwise it cannot be updated without a manual resource destroy-apply.
	Throughput pulumi.IntPtrInput
	// One or more `uniqueKey` blocks as defined below. Changing this forces a new resource to be created.
	UniqueKeys SqlContainerUniqueKeyArrayInput
}

type SqlContainerState struct {
	// The name of the Cosmos DB Account to create the container within. Changing this forces a new resource to be created.
	AccountName pulumi.StringPtrInput
	// The name of the Cosmos DB SQL Database to create the container within. Changing this forces a new resource to be created.
	DatabaseName pulumi.StringPtrInput
	// The default time to live of SQL container. If missing, items are not expired automatically. If present and the value is set to `-1`, it is equal to infinity, and items don’t expire by default. If present and the value is set to some number `n` – items will expire `n` seconds after their last modified time.
	DefaultTtl pulumi.IntPtrInput
	// Specifies the name of the Cosmos DB SQL Database. Changing this forces a new resource to be created.
	Name pulumi.StringPtrInput
	// Define a partition key. Changing this forces a new resource to be created.
	PartitionKeyPath pulumi.StringPtrInput
	// The name of the resource group in which the Cosmos DB SQL Database is created. Changing this forces a new resource to be created.
	ResourceGroupName pulumi.StringPtrInput
	// The throughput of SQL container (RU/s). Must be set in increments of `100`. The minimum value is `400`. This must be set upon container creation otherwise it cannot be updated without a manual resource destroy-apply.
	Throughput pulumi.IntPtrInput
	// One or more `uniqueKey` blocks as defined below. Changing this forces a new resource to be created.
	UniqueKeys SqlContainerUniqueKeyArrayInput
}

type SqlContainerUniqueKey struct {
	// A list of paths to use for this unique key.
	Paths []string `pulumi:"paths"`
}

type SqlContainerUniqueKeyArgs struct {
	// A list of paths to use for this unique key.
	Paths pulumi.StringArrayInput `pulumi:"paths"`
}

type SqlContainerUniqueKeyArray []SqlContainerUniqueKeyInput

type SqlContainerUniqueKeyArrayInput interface {
	pulumi.Input

	ToSqlContainerUniqueKeyArrayOutput() SqlContainerUniqueKeyArrayOutput
	ToSqlContainerUniqueKeyArrayOutputWithContext(context.Context) SqlContainerUniqueKeyArrayOutput
}

type SqlContainerUniqueKeyArrayOutput struct{ *pulumi.OutputState }

type SqlContainerUniqueKeyInput interface {
	pulumi.Input

	ToSqlContainerUniqueKeyOutput() SqlContainerUniqueKeyOutput
	ToSqlContainerUniqueKeyOutputWithContext(context.Context) SqlContainerUniqueKeyOutput
}

type SqlContainerUniqueKeyOutput struct{ *pulumi.OutputState }

type SqlDatabase struct {
	pulumi.CustomResourceState

	// The name of the Cosmos DB SQL Database to create the table within. Changing this forces a new resource to be created.
	AccountName pulumi.StringOutput `pulumi:"accountName"`
	// Specifies the name of the Cosmos DB SQL Database. Changing this forces a new resource to be created.
	Name pulumi.StringOutput `pulumi:"name"`
	// The name of the resource group in which the Cosmos DB SQL Database is created. Changing this forces a new resource to be created.
	ResourceGroupName pulumi.StringOutput `pulumi:"resourceGroupName"`
	// The throughput of SQL database (RU/s). Must be set in increments of `100`. The minimum value is `400`. This must be set upon database creation otherwise it cannot be updated without a manual resource destroy-apply.
	Throughput pulumi.IntOutput `pulumi:"throughput"`
}

type SqlDatabaseArgs struct {
	// The name of the Cosmos DB SQL Database to create the table within. Changing this forces a new resource to be created.
	AccountName pulumi.StringInput
	// Specifies the name of the Cosmos DB SQL Database. Changing this forces a new resource to be created.
	Name pulumi.StringPtrInput
	// The name of the resource group in which the Cosmos DB SQL Database is created. Changing this forces a new resource to be created.
	ResourceGroupName pulumi.StringInput
	// The throughput of SQL database (RU/s). Must be set in increments of `100`. The minimum value is `400`. This must be set upon database creation otherwise it cannot be updated without a manual resource destroy-apply.
	Throughput pulumi.IntPtrInput
}

type SqlDatabaseState struct {
	// The name of the Cosmos DB SQL Database to create the table within. Changing this forces a new resource to be created.
	AccountName pulumi.StringPtrInput
	// Specifies the name of the Cosmos DB SQL Database. Changing this forces a new resource to be created.
	Name pulumi.StringPtrInput
	// The name of the resource group in which the Cosmos DB SQL Database is created. Changing this forces a new resource to be created.
	ResourceGroupName pulumi.StringPtrInput
	// The throughput of SQL database (RU/s). Must be set in increments of `100`. The minimum value is `400`. This must be set upon database creation otherwise it cannot be updated without a manual resource destroy-apply.
	Throughput pulumi.IntPtrInput
}

type Table struct {
	pulumi.CustomResourceState

	// The name of the Cosmos DB Table to create the table within. Changing this forces a new resource to be created.
	AccountName pulumi.StringOutput `pulumi:"accountName"`
	// Specifies the name of the Cosmos DB Table. Changing this forces a new resource to be created.
	Name pulumi.StringOutput `pulumi:"name"`
	// The name of the resource group in which the Cosmos DB Table is created. Changing this forces a new resource to be created.
	ResourceGroupName pulumi.StringOutput `pulumi:"resourceGroupName"`
	// The throughput of Table (RU/s). Must be set in increments of `100`. The minimum value is `400`. This must be set upon database creation otherwise it cannot be updated without a manual resource destroy-apply.
	Throughput pulumi.IntOutput `pulumi:"throughput"`
}

type TableArgs struct {
	// The name of the Cosmos DB Table to create the table within. Changing this forces a new resource to be created.
	AccountName pulumi.StringInput
	// Specifies the name of the Cosmos DB Table. Changing this forces a new resource to be created.
	Name pulumi.StringPtrInput
	// The name of the resource group in which the Cosmos DB Table is created. Changing this forces a new resource to be created.
	ResourceGroupName pulumi.StringInput
	// The throughput of Table (RU/s). Must be set in increments of `100`. The minimum value is `400`. This must be set upon database creation otherwise it cannot be updated without a manual resource destroy-apply.
	Throughput pulumi.IntPtrInput
}

type TableState struct {
	// The name of the Cosmos DB Table to create the table within. Changing this forces a new resource to be created.
	AccountName pulumi.StringPtrInput
	// Specifies the name of the Cosmos DB Table. Changing this forces a new resource to be created.
	Name pulumi.StringPtrInput
	// The name of the resource group in which the Cosmos DB Table is created. Changing this forces a new resource to be created.
	ResourceGroupName pulumi.StringPtrInput
	// The throughput of Table (RU/s). Must be set in increments of `100`. The minimum value is `400`. This must be set upon database creation otherwise it cannot be updated without a manual resource destroy-apply.
	Throughput pulumi.IntPtrInput
}