yggdrasil-go: github.com/yggdrasil-network/yggdrasil-go/src/config Index | Files

package config

import "github.com/yggdrasil-network/yggdrasil-go/src/config"

The config package contains structures related to the configuration of an Yggdrasil node.

The configuration contains, amongst other things, encryption keys which are used to derive a node's identity, information about peerings and node information that is shared with the network. There are also some module-specific options related to TUN, multicast and the admin socket.

In order for a node to maintain the same identity across restarts, you should persist the configuration onto the filesystem or into some configuration storage so that the encryption keys (and therefore the node ID) do not change.

Note that Yggdrasil will automatically populate sane defaults for any configuration option that is not provided.

Index

Package Files

config.go

type MTU Uses

type MTU = types.MTU

type NodeConfig Uses

type NodeConfig struct {
    Peers                       []string               `comment:"List of connection strings for outbound peer connections in URI format,\ne.g. tcp://a.b.c.d:e or socks://a.b.c.d:e/f.g.h.i:j. These connections\nwill obey the operating system routing table, therefore you should\nuse this section when you may connect via different interfaces."`
    InterfacePeers              map[string][]string    `comment:"List of connection strings for outbound peer connections in URI format,\narranged by source interface, e.g. { \"eth0\": [ tcp://a.b.c.d:e ] }.\nNote that SOCKS peerings will NOT be affected by this option and should\ngo in the \"Peers\" section instead."`
    Listen                      []string               `comment:"Listen addresses for incoming connections. You will need to add\nlisteners in order to accept incoming peerings from non-local nodes.\nMulticast peer discovery will work regardless of any listeners set\nhere. Each listener should be specified in URI format as above, e.g.\ntcp://0.0.0.0:0 or tcp://[::]:0 to listen on all interfaces."`
    AdminListen                 string                 `comment:"Listen address for admin connections. Default is to listen for local\nconnections either on TCP/9001 or a UNIX socket depending on your\nplatform. Use this value for yggdrasilctl -endpoint=X. To disable\nthe admin socket, use the value \"none\" instead."`
    MulticastInterfaces         []string               `comment:"Regular expressions for which interfaces multicast peer discovery\nshould be enabled on. If none specified, multicast peer discovery is\ndisabled. The default value is .* which uses all interfaces."`
    AllowedEncryptionPublicKeys []string               `comment:"List of peer encryption public keys to allow incoming TCP peering\nconnections from. If left empty/undefined then all connections will\nbe allowed by default. This does not affect outgoing peerings, nor\ndoes it affect link-local peers discovered via multicast."`
    EncryptionPublicKey         string                 `comment:"Your public encryption key. Your peers may ask you for this to put\ninto their AllowedEncryptionPublicKeys configuration."`
    EncryptionPrivateKey        string                 `comment:"Your private encryption key. DO NOT share this with anyone!"`
    SigningPublicKey            string                 `comment:"Your public signing key. You should not ordinarily need to share\nthis with anyone."`
    SigningPrivateKey           string                 `comment:"Your private signing key. DO NOT share this with anyone!"`
    LinkLocalTCPPort            uint16                 `comment:"The port number to be used for the link-local TCP listeners for the\nconfigured MulticastInterfaces. This option does not affect listeners\nspecified in the Listen option. Unless you plan to firewall link-local\ntraffic, it is best to leave this as the default value of 0. This\noption cannot currently be changed by reloading config during runtime."`
    IfName                      string                 `comment:"Local network interface name for TUN adapter, or \"auto\" to select\nan interface automatically, or \"none\" to run without TUN."`
    IfMTU                       MTU                    `comment:"Maximum Transmission Unit (MTU) size for your local TUN interface.\nDefault is the largest supported size for your platform. The lowest\npossible value is 1280."`
    SessionFirewall             SessionFirewall        `comment:"The session firewall controls who can send/receive network traffic\nto/from. This is useful if you want to protect this node without\nresorting to using a real firewall. This does not affect traffic\nbeing routed via this node to somewhere else. Rules are prioritised as\nfollows: blacklist, whitelist, always allow outgoing, direct, remote."`
    TunnelRouting               TunnelRouting          `comment:"Allow tunneling non-Yggdrasil traffic over Yggdrasil. This effectively\nallows you to use Yggdrasil to route to, or to bridge other networks,\nsimilar to a VPN tunnel. Tunnelling works between any two nodes and\ndoes not require them to be directly peered."`
    SwitchOptions               SwitchOptions          `comment:"Advanced options for tuning the switch. Normally you will not need\nto edit these options."`
    NodeInfoPrivacy             bool                   `comment:"By default, nodeinfo contains some defaults including the platform,\narchitecture and Yggdrasil version. These can help when surveying\nthe network and diagnosing network routing problems. Enabling\nnodeinfo privacy prevents this, so that only items specified in\n\"NodeInfo\" are sent back if specified."`
    NodeInfo                    map[string]interface{} `comment:"Optional node info. This must be a { \"key\": \"value\", ... } map\nor set as null. This is entirely optional but, if set, is visible\nto the whole network on request."`
}

NodeConfig is the main configuration structure, containing configuration options that are necessary for an Yggdrasil node to run. You will need to supply one of these structs to the Yggdrasil core when starting a node.

func GenerateConfig Uses

func GenerateConfig() *NodeConfig

Generates default configuration and returns a pointer to the resulting NodeConfig. This is used when outputting the -genconf parameter and also when using -autoconf.

func (*NodeConfig) NewEncryptionKeys Uses

func (cfg *NodeConfig) NewEncryptionKeys()

NewEncryptionKeys replaces the encryption keypair in the NodeConfig with a new encryption keypair. The encryption keys are used by the router to encrypt traffic and to derive the node ID and IPv6 address/subnet of the node, so this is equivalent to discarding the node's identity on the network.

func (*NodeConfig) NewSigningKeys Uses

func (cfg *NodeConfig) NewSigningKeys()

NewSigningKeys replaces the signing keypair in the NodeConfig with a new signing keypair. The signing keys are used by the switch to derive the structure of the spanning tree.

type NodeState Uses

type NodeState struct {
    Current  NodeConfig
    Previous NodeConfig
    Mutex    sync.RWMutex
}

NodeState represents the active and previous configuration of an Yggdrasil node. A NodeState object is returned when starting an Yggdrasil node. Note that this structure and related functions are likely to disappear soon.

func (*NodeState) GetCurrent Uses

func (s *NodeState) GetCurrent() NodeConfig

Current returns the active node configuration.

func (*NodeState) GetPrevious Uses

func (s *NodeState) GetPrevious() NodeConfig

Previous returns the previous node configuration.

func (*NodeState) Replace Uses

func (s *NodeState) Replace(n NodeConfig)

Replace the node configuration with new configuration.

type SessionFirewall Uses

type SessionFirewall struct {
    Enable                        bool     `comment:"Enable or disable the session firewall. If disabled, network traffic\nfrom any node will be allowed. If enabled, the below rules apply."`
    AllowFromDirect               bool     `comment:"Allow network traffic from directly connected peers."`
    AllowFromRemote               bool     `comment:"Allow network traffic from remote nodes on the network that you are\nnot directly peered with."`
    AlwaysAllowOutbound           bool     `comment:"Allow outbound network traffic regardless of AllowFromDirect or\nAllowFromRemote. This does allow a remote node to send unsolicited\ntraffic back to you for the length of the session."`
    WhitelistEncryptionPublicKeys []string `comment:"List of public keys from which network traffic is always accepted,\nregardless of AllowFromDirect or AllowFromRemote."`
    BlacklistEncryptionPublicKeys []string `comment:"List of public keys from which network traffic is always rejected,\nregardless of the whitelist, AllowFromDirect or AllowFromRemote."`
}

SessionFirewall controls the session firewall configuration.

type SwitchOptions Uses

type SwitchOptions struct {
    MaxTotalQueueSize uint64 `comment:"Maximum size of all switch queues combined (in bytes)."`
}

SwitchOptions contains tuning options for the switch. These are advanced options and shouldn't be changed unless necessary.

type TunnelRouting Uses

type TunnelRouting struct {
    Enable            bool              `comment:"Enable or disable tunnel routing."`
    IPv6RemoteSubnets map[string]string `comment:"IPv6 subnets belonging to remote nodes, mapped to the node's public\nkey, e.g. { \"aaaa:bbbb:cccc::/e\": \"boxpubkey\", ... }"`
    IPv6LocalSubnets  []string          `comment:"IPv6 subnets belonging to this node's end of the tunnels. Only traffic\nfrom these ranges (or the Yggdrasil node's IPv6 address/subnet)\nwill be tunnelled."`
    IPv4RemoteSubnets map[string]string `comment:"IPv4 subnets belonging to remote nodes, mapped to the node's public\nkey, e.g. { \"a.b.c.d/e\": \"boxpubkey\", ... }"`
    IPv4LocalSubnets  []string          `comment:"IPv4 subnets belonging to this node's end of the tunnels. Only traffic\nfrom these ranges will be tunnelled."`
}

TunnelRouting contains the crypto-key routing tables for tunneling regular IPv4 or IPv6 subnets across the Yggdrasil network.

Package config imports 5 packages (graph) and is imported by 7 packages. Updated 2020-03-09. Refresh now. Tools for package owners.