appengine

type APIService struct {
	BasePath  string // API endpoint base URL
	UserAgent string // optional additional User-Agent fragment

	Apps *AppsService

	Projects *ProjectsService
	// contains filtered or unexported fields
}

type AppsAuthorizedCertificatesCreateCall struct {
	// contains filtered or unexported fields
}

type AppsAuthorizedCertificatesDeleteCall struct {
	// contains filtered or unexported fields
}

type AppsAuthorizedCertificatesGetCall struct {
	// contains filtered or unexported fields
}

type AppsAuthorizedCertificatesListCall struct {
	// contains filtered or unexported fields
}

type AppsAuthorizedCertificatesPatchCall struct {
	// contains filtered or unexported fields
}

type AppsAuthorizedCertificatesService struct {
	// contains filtered or unexported fields
}

type AppsAuthorizedDomainsListCall struct {
	// contains filtered or unexported fields
}

type AppsAuthorizedDomainsService struct {
	// contains filtered or unexported fields
}

type AppsDomainMappingsCreateCall struct {
	// contains filtered or unexported fields
}

type AppsDomainMappingsDeleteCall struct {
	// contains filtered or unexported fields
}

type AppsDomainMappingsGetCall struct {
	// contains filtered or unexported fields
}

type AppsDomainMappingsListCall struct {
	// contains filtered or unexported fields
}

type AppsDomainMappingsPatchCall struct {
	// contains filtered or unexported fields
}

type AppsDomainMappingsService struct {
	// contains filtered or unexported fields
}

type AppsLocationsGetCall struct {
	// contains filtered or unexported fields
}

type AppsLocationsListCall struct {
	// contains filtered or unexported fields
}

type AppsLocationsService struct {
	// contains filtered or unexported fields
}

type AppsOperationsGetCall struct {
	// contains filtered or unexported fields
}

type AppsOperationsListCall struct {
	// contains filtered or unexported fields
}

type AppsOperationsService struct {
	// contains filtered or unexported fields
}

type AppsService struct {
	AuthorizedCertificates *AppsAuthorizedCertificatesService

	AuthorizedDomains *AppsAuthorizedDomainsService

	DomainMappings *AppsDomainMappingsService

	Locations *AppsLocationsService

	Operations *AppsOperationsService
	// contains filtered or unexported fields
}

type AuthorizedCertificate struct {
	// CertificateRawData: The SSL certificate serving the
	// AuthorizedCertificate resource. This must be obtained independently
	// from a certificate authority.
	CertificateRawData *CertificateRawData `json:"certificateRawData,omitempty"`

	// DisplayName: The user-specified display name of the certificate. This
	// is not guaranteed to be unique. Example: My Certificate.
	DisplayName string `json:"displayName,omitempty"`

	// DomainMappingsCount: Aggregate count of the domain mappings with this
	// certificate mapped. This count includes domain mappings on
	// applications for which the user does not have VIEWER permissions.Only
	// returned by GET or LIST requests when specifically requested by the
	// view=FULL_CERTIFICATE option.@OutputOnly
	DomainMappingsCount int64 `json:"domainMappingsCount,omitempty"`

	// DomainNames: Topmost applicable domains of this certificate. This
	// certificate applies to these domains and their subdomains. Example:
	// example.com.@OutputOnly
	DomainNames []string `json:"domainNames,omitempty"`

	// ExpireTime: The time when this certificate expires. To update the
	// renewal time on this certificate, upload an SSL certificate with a
	// different expiration time using
	// AuthorizedCertificates.UpdateAuthorizedCertificate.@OutputOnly
	ExpireTime string `json:"expireTime,omitempty"`

	// Id: Relative name of the certificate. This is a unique value
	// autogenerated on AuthorizedCertificate resource creation. Example:
	// 12345.@OutputOnly
	Id string `json:"id,omitempty"`

	// ManagedCertificate: Only applicable if this certificate is managed by
	// App Engine. Managed certificates are tied to the lifecycle of a
	// DomainMapping and cannot be updated or deleted via the
	// AuthorizedCertificates API. If this certificate is manually
	// administered by the user, this field will be empty.@OutputOnly
	ManagedCertificate *ManagedCertificate `json:"managedCertificate,omitempty"`

	// Name: Full path to the AuthorizedCertificate resource in the API.
	// Example: apps/myapp/authorizedCertificates/12345.@OutputOnly
	Name string `json:"name,omitempty"`

	// VisibleDomainMappings: The full paths to user visible Domain Mapping
	// resources that have this certificate mapped. Example:
	// apps/myapp/domainMappings/example.com.This may not represent the full
	// list of mapped domain mappings if the user does not have VIEWER
	// permissions on all of the applications that have this certificate
	// mapped. See domain_mappings_count for a complete count.Only returned
	// by GET or LIST requests when specifically requested by the
	// view=FULL_CERTIFICATE option.@OutputOnly
	VisibleDomainMappings []string `json:"visibleDomainMappings,omitempty"`

	// ServerResponse contains the HTTP response code and headers from the
	// server.
	googleapi.ServerResponse `json:"-"`

	// ForceSendFields is a list of field names (e.g. "CertificateRawData")
	// to unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "CertificateRawData") to
	// include in API requests with the JSON null value. By default, fields
	// with empty values are omitted from API requests. However, any field
	// with an empty value appearing in NullFields will be sent to the
	// server as null. It is an error if a field in this list has a
	// non-empty value. This may be used to include null fields in Patch
	// requests.
	NullFields []string `json:"-"`
}

type AuthorizedDomain struct {
	// Id: Fully qualified domain name of the domain authorized for use.
	// Example: example.com.
	Id string `json:"id,omitempty"`

	// Name: Full path to the AuthorizedDomain resource in the API. Example:
	// apps/myapp/authorizedDomains/example.com.@OutputOnly
	Name string `json:"name,omitempty"`

	// ForceSendFields is a list of field names (e.g. "Id") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Id") to include in API
	// requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type CertificateRawData struct {
	// PrivateKey: Unencrypted PEM encoded RSA private key. This field is
	// set once on certificate creation and then encrypted. The key size
	// must be 2048 bits or fewer. Must include the header and footer.
	// Example: -----BEGIN RSA PRIVATE KEY----- -----END RSA PRIVATE
	// KEY----- @InputOnly
	PrivateKey string `json:"privateKey,omitempty"`

	// PublicCertificate: PEM encoded x.509 public key certificate. This
	// field is set once on certificate creation. Must include the header
	// and footer. Example: -----BEGIN CERTIFICATE----- -----END
	// CERTIFICATE-----
	PublicCertificate string `json:"publicCertificate,omitempty"`

	// ForceSendFields is a list of field names (e.g. "PrivateKey") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "PrivateKey") to include in
	// API requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type ContainerState struct {
	CurrentReasons *Reasons `json:"currentReasons,omitempty"`

	// PreviousReasons: The previous and current reasons for a container
	// state will be sent for a container event. CLHs that need to know the
	// signal that caused the container event to trigger (edges) as opposed
	// to just knowing the state can act upon differences in the previous
	// and current reasons.Reasons will be provided for every system:
	// service management, data governance, abuse, and billing.If this is a
	// CCFE-triggered event used for reconciliation then the current reasons
	// will be set to their *_CONTROL_PLANE_SYNC state. The previous reasons
	// will contain the last known set of non-unknown non-control_plane_sync
	// reasons for the state.
	PreviousReasons *Reasons `json:"previousReasons,omitempty"`

	// State: The current state of the container. This state is the
	// culmination of all of the opinions from external systems that CCFE
	// knows about of the container.
	//
	// Possible values:
	//   "UNKNOWN_STATE" - A container should never be in an unknown state.
	// Receipt of a container with this state is an error.
	//   "ON" - CCFE considers the container to be serving or transitioning
	// into serving.
	//   "OFF" - CCFE considers the container to be in an OFF state. This
	// could occur due to various factors. The state could be triggered by
	// Google-internal audits (ex. abuse suspension, billing closed) or
	// cleanups trigged by compliance systems (ex. data governance hide).
	// User-initiated events such as service management deactivation trigger
	// a container to an OFF state.CLHs might choose to do nothing in this
	// case or to turn off costly resources. CLHs need to consider the
	// customer experience if an ON/OFF/ON sequence of state transitions
	// occurs vs. the cost of deleting resources, keeping metadata about
	// resources, or even keeping resources live for a period of time.CCFE
	// will not send any new customer requests to the CLH when the container
	// is in an OFF state. However, CCFE will allow all previous customer
	// requests relayed to CLH to complete.
	//   "DELETED" - This state indicates that the container has been (or is
	// being) completely removed. This is often due to a data governance
	// purge request and therefore resources should be deleted when this
	// state is reached.
	State string `json:"state,omitempty"`

	// ForceSendFields is a list of field names (e.g. "CurrentReasons") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "CurrentReasons") to
	// include in API requests with the JSON null value. By default, fields
	// with empty values are omitted from API requests. However, any field
	// with an empty value appearing in NullFields will be sent to the
	// server as null. It is an error if a field in this list has a
	// non-empty value. This may be used to include null fields in Patch
	// requests.
	NullFields []string `json:"-"`
}

type CreateVersionMetadataV1 struct {
	// CloudBuildId: The Cloud Build ID if one was created as part of the
	// version create. @OutputOnly
	CloudBuildId string `json:"cloudBuildId,omitempty"`

	// ForceSendFields is a list of field names (e.g. "CloudBuildId") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "CloudBuildId") to include
	// in API requests with the JSON null value. By default, fields with
	// empty values are omitted from API requests. However, any field with
	// an empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type CreateVersionMetadataV1Alpha struct {
	// CloudBuildId: The Cloud Build ID if one was created as part of the
	// version create. @OutputOnly
	CloudBuildId string `json:"cloudBuildId,omitempty"`

	// ForceSendFields is a list of field names (e.g. "CloudBuildId") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "CloudBuildId") to include
	// in API requests with the JSON null value. By default, fields with
	// empty values are omitted from API requests. However, any field with
	// an empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type CreateVersionMetadataV1Beta struct {
	// CloudBuildId: The Cloud Build ID if one was created as part of the
	// version create. @OutputOnly
	CloudBuildId string `json:"cloudBuildId,omitempty"`

	// ForceSendFields is a list of field names (e.g. "CloudBuildId") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "CloudBuildId") to include
	// in API requests with the JSON null value. By default, fields with
	// empty values are omitted from API requests. However, any field with
	// an empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type DomainMapping struct {
	// Id: Relative name of the domain serving the application. Example:
	// example.com.
	Id string `json:"id,omitempty"`

	// Name: Full path to the DomainMapping resource in the API. Example:
	// apps/myapp/domainMapping/example.com.@OutputOnly
	Name string `json:"name,omitempty"`

	// ResourceRecords: The resource records required to configure this
	// domain mapping. These records must be added to the domain's DNS
	// configuration in order to serve the application via this domain
	// mapping.@OutputOnly
	ResourceRecords []*ResourceRecord `json:"resourceRecords,omitempty"`

	// SslSettings: SSL configuration for this domain. If unconfigured, this
	// domain will not serve with SSL.
	SslSettings *SslSettings `json:"sslSettings,omitempty"`

	// ServerResponse contains the HTTP response code and headers from the
	// server.
	googleapi.ServerResponse `json:"-"`

	// ForceSendFields is a list of field names (e.g. "Id") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Id") to include in API
	// requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type Empty struct {
	// ServerResponse contains the HTTP response code and headers from the
	// server.
	googleapi.ServerResponse `json:"-"`
}

type GoogleAppengineV1betaLocationMetadata struct {
	// FlexibleEnvironmentAvailable: App Engine flexible environment is
	// available in the given location.@OutputOnly
	FlexibleEnvironmentAvailable bool `json:"flexibleEnvironmentAvailable,omitempty"`

	// SearchApiAvailable: Output only. Search API
	// (https://cloud.google.com/appengine/docs/standard/python/search) is
	// available in the given location.
	SearchApiAvailable bool `json:"searchApiAvailable,omitempty"`

	// StandardEnvironmentAvailable: App Engine standard environment is
	// available in the given location.@OutputOnly
	StandardEnvironmentAvailable bool `json:"standardEnvironmentAvailable,omitempty"`

	// ForceSendFields is a list of field names (e.g.
	// "FlexibleEnvironmentAvailable") to unconditionally include in API
	// requests. By default, fields with empty or default values are omitted
	// from API requests. However, any non-pointer, non-interface field
	// appearing in ForceSendFields will be sent to the server regardless of
	// whether the field is empty or not. This may be used to include empty
	// fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g.
	// "FlexibleEnvironmentAvailable") to include in API requests with the
	// JSON null value. By default, fields with empty values are omitted
	// from API requests. However, any field with an empty value appearing
	// in NullFields will be sent to the server as null. It is an error if a
	// field in this list has a non-empty value. This may be used to include
	// null fields in Patch requests.
	NullFields []string `json:"-"`
}

type ListAuthorizedCertificatesResponse struct {
	// Certificates: The SSL certificates the user is authorized to
	// administer.
	Certificates []*AuthorizedCertificate `json:"certificates,omitempty"`

	// NextPageToken: Continuation token for fetching the next page of
	// results.
	NextPageToken string `json:"nextPageToken,omitempty"`

	// ServerResponse contains the HTTP response code and headers from the
	// server.
	googleapi.ServerResponse `json:"-"`

	// ForceSendFields is a list of field names (e.g. "Certificates") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Certificates") to include
	// in API requests with the JSON null value. By default, fields with
	// empty values are omitted from API requests. However, any field with
	// an empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type ListAuthorizedDomainsResponse struct {
	// Domains: The authorized domains belonging to the user.
	Domains []*AuthorizedDomain `json:"domains,omitempty"`

	// NextPageToken: Continuation token for fetching the next page of
	// results.
	NextPageToken string `json:"nextPageToken,omitempty"`

	// ServerResponse contains the HTTP response code and headers from the
	// server.
	googleapi.ServerResponse `json:"-"`

	// ForceSendFields is a list of field names (e.g. "Domains") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Domains") to include in
	// API requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type ListDomainMappingsResponse struct {
	// DomainMappings: The domain mappings for the application.
	DomainMappings []*DomainMapping `json:"domainMappings,omitempty"`

	// NextPageToken: Continuation token for fetching the next page of
	// results.
	NextPageToken string `json:"nextPageToken,omitempty"`

	// ServerResponse contains the HTTP response code and headers from the
	// server.
	googleapi.ServerResponse `json:"-"`

	// ForceSendFields is a list of field names (e.g. "DomainMappings") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "DomainMappings") to
	// include in API requests with the JSON null value. By default, fields
	// with empty values are omitted from API requests. However, any field
	// with an empty value appearing in NullFields will be sent to the
	// server as null. It is an error if a field in this list has a
	// non-empty value. This may be used to include null fields in Patch
	// requests.
	NullFields []string `json:"-"`
}

type ListLocationsResponse struct {
	// Locations: A list of locations that matches the specified filter in
	// the request.
	Locations []*Location `json:"locations,omitempty"`

	// NextPageToken: The standard List next-page token.
	NextPageToken string `json:"nextPageToken,omitempty"`

	// ServerResponse contains the HTTP response code and headers from the
	// server.
	googleapi.ServerResponse `json:"-"`

	// ForceSendFields is a list of field names (e.g. "Locations") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Locations") to include in
	// API requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type ListOperationsResponse struct {
	// NextPageToken: The standard List next-page token.
	NextPageToken string `json:"nextPageToken,omitempty"`

	// Operations: A list of operations that matches the specified filter in
	// the request.
	Operations []*Operation `json:"operations,omitempty"`

	// ServerResponse contains the HTTP response code and headers from the
	// server.
	googleapi.ServerResponse `json:"-"`

	// ForceSendFields is a list of field names (e.g. "NextPageToken") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "NextPageToken") to include
	// in API requests with the JSON null value. By default, fields with
	// empty values are omitted from API requests. However, any field with
	// an empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type Location struct {
	// DisplayName: The friendly name for this location, typically a nearby
	// city name. For example, "Tokyo".
	DisplayName string `json:"displayName,omitempty"`

	// Labels: Cross-service attributes for the location. For example
	// {"cloud.googleapis.com/region": "us-east1"}
	Labels map[string]string `json:"labels,omitempty"`

	// LocationId: The canonical id for this location. For example:
	// "us-east1".
	LocationId string `json:"locationId,omitempty"`

	// Metadata: Service-specific metadata. For example the available
	// capacity at the given location.
	Metadata googleapi.RawMessage `json:"metadata,omitempty"`

	// Name: Resource name for the location, which may vary between
	// implementations. For example:
	// "projects/example-project/locations/us-east1"
	Name string `json:"name,omitempty"`

	// ServerResponse contains the HTTP response code and headers from the
	// server.
	googleapi.ServerResponse `json:"-"`

	// ForceSendFields is a list of field names (e.g. "DisplayName") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "DisplayName") to include
	// in API requests with the JSON null value. By default, fields with
	// empty values are omitted from API requests. However, any field with
	// an empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type LocationMetadata struct {
	// FlexibleEnvironmentAvailable: App Engine flexible environment is
	// available in the given location.@OutputOnly
	FlexibleEnvironmentAvailable bool `json:"flexibleEnvironmentAvailable,omitempty"`

	// SearchApiAvailable: Output only. Search API
	// (https://cloud.google.com/appengine/docs/standard/python/search) is
	// available in the given location.
	SearchApiAvailable bool `json:"searchApiAvailable,omitempty"`

	// StandardEnvironmentAvailable: App Engine standard environment is
	// available in the given location.@OutputOnly
	StandardEnvironmentAvailable bool `json:"standardEnvironmentAvailable,omitempty"`

	// ForceSendFields is a list of field names (e.g.
	// "FlexibleEnvironmentAvailable") to unconditionally include in API
	// requests. By default, fields with empty or default values are omitted
	// from API requests. However, any non-pointer, non-interface field
	// appearing in ForceSendFields will be sent to the server regardless of
	// whether the field is empty or not. This may be used to include empty
	// fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g.
	// "FlexibleEnvironmentAvailable") to include in API requests with the
	// JSON null value. By default, fields with empty values are omitted
	// from API requests. However, any field with an empty value appearing
	// in NullFields will be sent to the server as null. It is an error if a
	// field in this list has a non-empty value. This may be used to include
	// null fields in Patch requests.
	NullFields []string `json:"-"`
}

type ManagedCertificate struct {
	// LastRenewalTime: Time at which the certificate was last renewed. The
	// renewal process is fully managed. Certificate renewal will
	// automatically occur before the certificate expires. Renewal errors
	// can be tracked via ManagementStatus.@OutputOnly
	LastRenewalTime string `json:"lastRenewalTime,omitempty"`

	// Status: Status of certificate management. Refers to the most recent
	// certificate acquisition or renewal attempt.@OutputOnly
	//
	// Possible values:
	//   "UNSPECIFIED_STATUS"
	//   "OK" - Certificate was successfully obtained and inserted into the
	// serving system.
	//   "PENDING" - Certificate is under active attempts to acquire or
	// renew.
	//   "FAILED_RETRYING_INTERNAL" - Most recent renewal failed due to a
	// system failure and will be retried. System failure is likely
	// transient, and subsequent renewal attempts may succeed. The last
	// successfully provisioned certificate may still be serving.
	//   "FAILED_RETRYING_NOT_VISIBLE" - Most recent renewal failed due to
	// an invalid DNS setup and will be retried. Renewal attempts will
	// continue to fail until the certificate domain's DNS configuration is
	// fixed. The last successfully provisioned certificate may still be
	// serving.
	//   "FAILED_PERMANENTLY_NOT_VISIBLE" - All renewal attempts have been
	// exhausted. Most recent renewal failed due to an invalid DNS setup and
	// will not be retried. The last successfully provisioned certificate
	// may still be serving.
	//   "FAILED_RETRYING_CAA_FORBIDDEN" - Most recent renewal failed due to
	// an explicit CAA record that does not include one of the in-use CAs
	// (Google CA and Let's Encrypt). Renewals will continue to fail until
	// the CAA is reconfigured. The last successfully provisioned
	// certificate may still be serving.
	//   "FAILED_RETRYING_CAA_CHECKING" - Most recent renewal failed due to
	// a CAA retrieval failure. This means that the domain's DNS provider
	// does not properly handle CAA records, failing requests for CAA
	// records when no CAA records are defined. Renewals will continue to
	// fail until the DNS provider is changed or a CAA record is added for
	// the given domain. The last successfully provisioned certificate may
	// still be serving.
	Status string `json:"status,omitempty"`

	// ForceSendFields is a list of field names (e.g. "LastRenewalTime") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "LastRenewalTime") to
	// include in API requests with the JSON null value. By default, fields
	// with empty values are omitted from API requests. However, any field
	// with an empty value appearing in NullFields will be sent to the
	// server as null. It is an error if a field in this list has a
	// non-empty value. This may be used to include null fields in Patch
	// requests.
	NullFields []string `json:"-"`
}

type Operation struct {
	// Done: If the value is false, it means the operation is still in
	// progress. If true, the operation is completed, and either error or
	// response is available.
	Done bool `json:"done,omitempty"`

	// Error: The error result of the operation in case of failure or
	// cancellation.
	Error *Status `json:"error,omitempty"`

	// Metadata: Service-specific metadata associated with the operation. It
	// typically contains progress information and common metadata such as
	// create time. Some services might not provide such metadata. Any
	// method that returns a long-running operation should document the
	// metadata type, if any.
	Metadata googleapi.RawMessage `json:"metadata,omitempty"`

	// Name: The server-assigned name, which is only unique within the same
	// service that originally returns it. If you use the default HTTP
	// mapping, the name should be a resource name ending with
	// operations/{unique_id}.
	Name string `json:"name,omitempty"`

	// Response: The normal, successful response of the operation. If the
	// original method returns no data on success, such as Delete, the
	// response is google.protobuf.Empty. If the original method is standard
	// Get/Create/Update, the response should be the resource. For other
	// methods, the response should have the type XxxResponse, where Xxx is
	// the original method name. For example, if the original method name is
	// TakeSnapshot(), the inferred response type is TakeSnapshotResponse.
	Response googleapi.RawMessage `json:"response,omitempty"`

	// ServerResponse contains the HTTP response code and headers from the
	// server.
	googleapi.ServerResponse `json:"-"`

	// ForceSendFields is a list of field names (e.g. "Done") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Done") to include in API
	// requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type OperationMetadataV1 struct {
	CreateVersionMetadata *CreateVersionMetadataV1 `json:"createVersionMetadata,omitempty"`

	// EndTime: Time that this operation completed.@OutputOnly
	EndTime string `json:"endTime,omitempty"`

	// EphemeralMessage: Ephemeral message that may change every time the
	// operation is polled. @OutputOnly
	EphemeralMessage string `json:"ephemeralMessage,omitempty"`

	// InsertTime: Time that this operation was created.@OutputOnly
	InsertTime string `json:"insertTime,omitempty"`

	// Method: API method that initiated this operation. Example:
	// google.appengine.v1.Versions.CreateVersion.@OutputOnly
	Method string `json:"method,omitempty"`

	// Target: Name of the resource that this operation is acting on.
	// Example: apps/myapp/services/default.@OutputOnly
	Target string `json:"target,omitempty"`

	// User: User who requested this operation.@OutputOnly
	User string `json:"user,omitempty"`

	// Warning: Durable messages that persist on every operation poll.
	// @OutputOnly
	Warning []string `json:"warning,omitempty"`

	// ForceSendFields is a list of field names (e.g.
	// "CreateVersionMetadata") to unconditionally include in API requests.
	// By default, fields with empty or default values are omitted from API
	// requests. However, any non-pointer, non-interface field appearing in
	// ForceSendFields will be sent to the server regardless of whether the
	// field is empty or not. This may be used to include empty fields in
	// Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "CreateVersionMetadata") to
	// include in API requests with the JSON null value. By default, fields
	// with empty values are omitted from API requests. However, any field
	// with an empty value appearing in NullFields will be sent to the
	// server as null. It is an error if a field in this list has a
	// non-empty value. This may be used to include null fields in Patch
	// requests.
	NullFields []string `json:"-"`
}

type OperationMetadataV1Alpha struct {
	CreateVersionMetadata *CreateVersionMetadataV1Alpha `json:"createVersionMetadata,omitempty"`

	// EndTime: Time that this operation completed.@OutputOnly
	EndTime string `json:"endTime,omitempty"`

	// EphemeralMessage: Ephemeral message that may change every time the
	// operation is polled. @OutputOnly
	EphemeralMessage string `json:"ephemeralMessage,omitempty"`

	// InsertTime: Time that this operation was created.@OutputOnly
	InsertTime string `json:"insertTime,omitempty"`

	// Method: API method that initiated this operation. Example:
	// google.appengine.v1alpha.Versions.CreateVersion.@OutputOnly
	Method string `json:"method,omitempty"`

	// Target: Name of the resource that this operation is acting on.
	// Example: apps/myapp/services/default.@OutputOnly
	Target string `json:"target,omitempty"`

	// User: User who requested this operation.@OutputOnly
	User string `json:"user,omitempty"`

	// Warning: Durable messages that persist on every operation poll.
	// @OutputOnly
	Warning []string `json:"warning,omitempty"`

	// ForceSendFields is a list of field names (e.g.
	// "CreateVersionMetadata") to unconditionally include in API requests.
	// By default, fields with empty or default values are omitted from API
	// requests. However, any non-pointer, non-interface field appearing in
	// ForceSendFields will be sent to the server regardless of whether the
	// field is empty or not. This may be used to include empty fields in
	// Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "CreateVersionMetadata") to
	// include in API requests with the JSON null value. By default, fields
	// with empty values are omitted from API requests. However, any field
	// with an empty value appearing in NullFields will be sent to the
	// server as null. It is an error if a field in this list has a
	// non-empty value. This may be used to include null fields in Patch
	// requests.
	NullFields []string `json:"-"`
}

type OperationMetadataV1Beta struct {
	CreateVersionMetadata *CreateVersionMetadataV1Beta `json:"createVersionMetadata,omitempty"`

	// EndTime: Time that this operation completed.@OutputOnly
	EndTime string `json:"endTime,omitempty"`

	// EphemeralMessage: Ephemeral message that may change every time the
	// operation is polled. @OutputOnly
	EphemeralMessage string `json:"ephemeralMessage,omitempty"`

	// InsertTime: Time that this operation was created.@OutputOnly
	InsertTime string `json:"insertTime,omitempty"`

	// Method: API method that initiated this operation. Example:
	// google.appengine.v1beta.Versions.CreateVersion.@OutputOnly
	Method string `json:"method,omitempty"`

	// Target: Name of the resource that this operation is acting on.
	// Example: apps/myapp/services/default.@OutputOnly
	Target string `json:"target,omitempty"`

	// User: User who requested this operation.@OutputOnly
	User string `json:"user,omitempty"`

	// Warning: Durable messages that persist on every operation poll.
	// @OutputOnly
	Warning []string `json:"warning,omitempty"`

	// ForceSendFields is a list of field names (e.g.
	// "CreateVersionMetadata") to unconditionally include in API requests.
	// By default, fields with empty or default values are omitted from API
	// requests. However, any non-pointer, non-interface field appearing in
	// ForceSendFields will be sent to the server regardless of whether the
	// field is empty or not. This may be used to include empty fields in
	// Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "CreateVersionMetadata") to
	// include in API requests with the JSON null value. By default, fields
	// with empty values are omitted from API requests. However, any field
	// with an empty value appearing in NullFields will be sent to the
	// server as null. It is an error if a field in this list has a
	// non-empty value. This may be used to include null fields in Patch
	// requests.
	NullFields []string `json:"-"`
}

type ProjectEvent struct {
	// EventId: The unique ID for this project event. CLHs can use this
	// value to dedup repeated calls. required
	EventId string `json:"eventId,omitempty"`

	// Possible values:
	//   "UNKNOWN"
	//   "BEFORE_RESOURCE_HANDLING"
	//   "AFTER_RESOURCE_HANDLING"
	Phase string `json:"phase,omitempty"`

	// ProjectMetadata: The projects metadata for this project. required
	ProjectMetadata *ProjectsMetadata `json:"projectMetadata,omitempty"`

	// State: The state of the project that led to this event.
	State *ContainerState `json:"state,omitempty"`

	// ForceSendFields is a list of field names (e.g. "EventId") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "EventId") to include in
	// API requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type ProjectsLocationsApplicationsAuthorizedDomainsListCall struct {
	// contains filtered or unexported fields
}

type ProjectsLocationsApplicationsAuthorizedDomainsService struct {
	// contains filtered or unexported fields
}

type ProjectsLocationsApplicationsService struct {
	AuthorizedDomains *ProjectsLocationsApplicationsAuthorizedDomainsService
	// contains filtered or unexported fields
}

type ProjectsLocationsGetCall struct {
	// contains filtered or unexported fields
}

type ProjectsLocationsListCall struct {
	// contains filtered or unexported fields
}

type ProjectsLocationsOperationsGetCall struct {
	// contains filtered or unexported fields
}

type ProjectsLocationsOperationsListCall struct {
	// contains filtered or unexported fields
}

type ProjectsLocationsOperationsService struct {
	// contains filtered or unexported fields
}

type ProjectsLocationsService struct {
	Applications *ProjectsLocationsApplicationsService

	Operations *ProjectsLocationsOperationsService
	// contains filtered or unexported fields
}

type ProjectsMetadata struct {
	// ConsumerProjectId: The consumer project id.
	ConsumerProjectId string `json:"consumerProjectId,omitempty"`

	// ConsumerProjectNumber: The consumer project number.
	ConsumerProjectNumber int64 `json:"consumerProjectNumber,omitempty,string"`

	// ConsumerProjectState: The CCFE state of the consumer project. It is
	// the same state that is communicated to the CLH during project events.
	// Notice that this field is not set in the DB, it is only set in this
	// proto when communicated to CLH in the side channel.
	//
	// Possible values:
	//   "UNKNOWN_STATE" - A container should never be in an unknown state.
	// Receipt of a container with this state is an error.
	//   "ON" - CCFE considers the container to be serving or transitioning
	// into serving.
	//   "OFF" - CCFE considers the container to be in an OFF state. This
	// could occur due to various factors. The state could be triggered by
	// Google-internal audits (ex. abuse suspension, billing closed) or
	// cleanups trigged by compliance systems (ex. data governance hide).
	// User-initiated events such as service management deactivation trigger
	// a container to an OFF state.CLHs might choose to do nothing in this
	// case or to turn off costly resources. CLHs need to consider the
	// customer experience if an ON/OFF/ON sequence of state transitions
	// occurs vs. the cost of deleting resources, keeping metadata about
	// resources, or even keeping resources live for a period of time.CCFE
	// will not send any new customer requests to the CLH when the container
	// is in an OFF state. However, CCFE will allow all previous customer
	// requests relayed to CLH to complete.
	//   "DELETED" - This state indicates that the container has been (or is
	// being) completely removed. This is often due to a data governance
	// purge request and therefore resources should be deleted when this
	// state is reached.
	ConsumerProjectState string `json:"consumerProjectState,omitempty"`

	// P4ServiceAccount: The service account authorized to operate on the
	// consumer project. Note: CCFE only propagates P4SA with default tag to
	// CLH.
	P4ServiceAccount string `json:"p4ServiceAccount,omitempty"`

	// ProducerProjectId: The producer project id.
	ProducerProjectId string `json:"producerProjectId,omitempty"`

	// ProducerProjectNumber: The producer project number.
	ProducerProjectNumber int64 `json:"producerProjectNumber,omitempty,string"`

	// TenantProjectId: The tenant project id.
	TenantProjectId string `json:"tenantProjectId,omitempty"`

	// TenantProjectNumber: The tenant project number.
	TenantProjectNumber int64 `json:"tenantProjectNumber,omitempty,string"`

	// ForceSendFields is a list of field names (e.g. "ConsumerProjectId")
	// to unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "ConsumerProjectId") to
	// include in API requests with the JSON null value. By default, fields
	// with empty values are omitted from API requests. However, any field
	// with an empty value appearing in NullFields will be sent to the
	// server as null. It is an error if a field in this list has a
	// non-empty value. This may be used to include null fields in Patch
	// requests.
	NullFields []string `json:"-"`
}

type ProjectsService struct {
	Locations *ProjectsLocationsService
	// contains filtered or unexported fields
}

type Reasons struct {
	// Possible values:
	//   "ABUSE_UNKNOWN_REASON" - An unknown reason indicates that the abuse
	// system has not sent a signal for this container.
	//   "ABUSE_CONTROL_PLANE_SYNC" - Due to various reasons CCFE might
	// proactively restate a container state to a CLH to ensure that the CLH
	// and CCFE are both aware of the container state. This reason can be
	// tied to any of the states.
	//   "SUSPEND" - If a container is deemed abusive we receive a suspend
	// signal. Suspend is a reason to put the container into an INTERNAL_OFF
	// state.
	//   "REINSTATE" - Containers that were once considered abusive can
	// later be deemed non-abusive. When this happens we must reinstate the
	// container. Reinstate is a reason to put the container into an ON
	// state.
	Abuse string `json:"abuse,omitempty"`

	// Possible values:
	//   "BILLING_UNKNOWN_REASON" - An unknown reason indicates that the
	// billing system has not sent a signal for this container.
	//   "BILLING_CONTROL_PLANE_SYNC" - Due to various reasons CCFE might
	// proactively restate a container state to a CLH to ensure that the CLH
	// and CCFE are both aware of the container state. This reason can be
	// tied to any of the states.
	//   "PROBATION" - Minor infractions cause a probation signal to be
	// sent. Probation is a reason to put the container into a ON state even
	// though it is a negative signal. CCFE will block mutations for this
	// container while it is on billing probation, but the CLH is expected
	// to serve non-mutation requests.
	//   "CLOSE" - When a billing account is closed, it is a stronger signal
	// about non-payment. Close is a reason to put the container into an
	// INTERNAL_OFF state.
	//   "OPEN" - Consumers can re-open billing accounts and update accounts
	// to pull them out of probation. When this happens, we get a signal
	// that the account is open. Open is a reason to put the container into
	// an ON state.
	Billing string `json:"billing,omitempty"`

	// Possible values:
	//   "DATA_GOVERNANCE_UNKNOWN_REASON" - An unknown reason indicates that
	// data governance has not sent a signal for this container.
	//   "DATA_GOVERNANCE_CONTROL_PLANE_SYNC" - Due to various reasons CCFE
	// might proactively restate a container state to a CLH to ensure that
	// the CLH and CCFE are both aware of the container state. This reason
	// can be tied to any of the states.
	//   "HIDE" - When a container is deleted we retain some data for a
	// period of time to allow the consumer to change their mind. Data
	// governance sends a signal to hide the data when this occurs. Hide is
	// a reason to put the container in an INTERNAL_OFF state.
	//   "UNHIDE" - The decision to un-delete a container can be made. When
	// this happens data governance tells us to unhide any hidden data.
	// Unhide is a reason to put the container in an ON state.
	//   "PURGE" - After a period of time data must be completely removed
	// from our systems. When data governance sends a purge signal we need
	// to remove data. Purge is a reason to put the container in a DELETED
	// state. Purge is the only event that triggers a delete mutation. All
	// other events have update semantics.
	DataGovernance string `json:"dataGovernance,omitempty"`

	// ServiceActivation: Consumer Container denotes if the service is
	// active within a project or not. This information could be used to
	// clean up resources in case service in DISABLED_FULL i.e. Service is
	// inactive > 30 days.
	//
	// Possible values:
	//   "SERVICE_ACTIVATION_STATUS_UNSPECIFIED" - Default Unspecified
	// status
	//   "SERVICE_ACTIVATION_ENABLED" - Service is active in the project.
	//   "SERVICE_ACTIVATION_DISABLED" - Service is disabled in the project
	// recently i.e., within last 24 hours.
	//   "SERVICE_ACTIVATION_DISABLED_FULL" - Service has been disabled for
	// configured grace_period (default 30 days).
	//   "SERVICE_ACTIVATION_UNKNOWN_REASON" - Happens when PSM cannot
	// determine the status of service in a project Could happen due to
	// variety of reasons like PERMISSION_DENIED or Project got deleted etc.
	ServiceActivation string `json:"serviceActivation,omitempty"`

	// Possible values:
	//   "SERVICE_MANAGEMENT_UNKNOWN_REASON" - An unknown reason indicates
	// that we have not received a signal from service management about this
	// container. Since containers are created by request of service
	// management, this reason should never be set.
	//   "SERVICE_MANAGEMENT_CONTROL_PLANE_SYNC" - Due to various reasons
	// CCFE might proactively restate a container state to a CLH to ensure
	// that the CLH and CCFE are both aware of the container state. This
	// reason can be tied to any of the states.
	//   "ACTIVATION" - When a customer activates an API CCFE notifies the
	// CLH and sets the container to the ON state.
	//   "PREPARE_DEACTIVATION" - When a customer deactivates and API
	// service management starts a two-step process to perform the
	// deactivation. The first step is to prepare. Prepare is a reason to
	// put the container in a EXTERNAL_OFF state.
	//   "ABORT_DEACTIVATION" - If the deactivation is cancelled, service
	// managed needs to abort the deactivation. Abort is a reason to put the
	// container in an ON state.
	//   "COMMIT_DEACTIVATION" - If the deactivation is followed through
	// with, service management needs to finish deactivation. Commit is a
	// reason to put the container in a DELETED state.
	ServiceManagement string `json:"serviceManagement,omitempty"`

	// ForceSendFields is a list of field names (e.g. "Abuse") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Abuse") to include in API
	// requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type ResourceRecord struct {
	// Name: Relative name of the object affected by this record. Only
	// applicable for CNAME records. Example: 'www'.
	Name string `json:"name,omitempty"`

	// Rrdata: Data for this record. Values vary by record type, as defined
	// in RFC 1035 (section 5) and RFC 1034 (section 3.6.1).
	Rrdata string `json:"rrdata,omitempty"`

	// Type: Resource record type. Example: AAAA.
	//
	// Possible values:
	//   "A" - An A resource record. Data is an IPv4 address.
	//   "AAAA" - An AAAA resource record. Data is an IPv6 address.
	//   "CNAME" - A CNAME resource record. Data is a domain name to be
	// aliased.
	Type string `json:"type,omitempty"`

	// ForceSendFields is a list of field names (e.g. "Name") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Name") to include in API
	// requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type SslSettings struct {
	// CertificateId: ID of the AuthorizedCertificate resource configuring
	// SSL for the application. Clearing this field will remove SSL
	// support.By default, a managed certificate is automatically created
	// for every domain mapping. To omit SSL support or to configure SSL
	// manually, specify no_managed_certificate on a CREATE or UPDATE
	// request. You must be authorized to administer the
	// AuthorizedCertificate resource to manually map it to a DomainMapping
	// resource. Example: 12345.
	CertificateId string `json:"certificateId,omitempty"`

	// IsManagedCertificate: Whether the mapped certificate is an App Engine
	// managed certificate. Managed certificates are created by default with
	// a domain mapping. To opt out, specify no_managed_certificate on a
	// CREATE or UPDATE request.@OutputOnly
	IsManagedCertificate bool `json:"isManagedCertificate,omitempty"`

	// ForceSendFields is a list of field names (e.g. "CertificateId") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "CertificateId") to include
	// in API requests with the JSON null value. By default, fields with
	// empty values are omitted from API requests. However, any field with
	// an empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type Status struct {
	// Code: The status code, which should be an enum value of
	// google.rpc.Code.
	Code int64 `json:"code,omitempty"`

	// Details: A list of messages that carry the error details. There is a
	// common set of message types for APIs to use.
	Details []googleapi.RawMessage `json:"details,omitempty"`

	// Message: A developer-facing error message, which should be in
	// English. Any user-facing error message should be localized and sent
	// in the google.rpc.Status.details field, or localized by the client.
	Message string `json:"message,omitempty"`

	// ForceSendFields is a list of field names (e.g. "Code") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Code") to include in API
	// requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}