cloudbuild

type ApprovalConfig struct {
	// ApprovalRequired: Whether or not approval is needed. If this is set
	// on a build, it will become pending when created, and will need to be
	// explicitly approved to start.
	ApprovalRequired bool `json:"approvalRequired,omitempty"`

	// ForceSendFields is a list of field names (e.g. "ApprovalRequired") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "ApprovalRequired") to
	// include in API requests with the JSON null value. By default, fields
	// with empty values are omitted from API requests. However, any field
	// with an empty value appearing in NullFields will be sent to the
	// server as null. It is an error if a field in this list has a
	// non-empty value. This may be used to include null fields in Patch
	// requests.
	NullFields []string `json:"-"`
}

type ApprovalResult struct {
	// ApprovalTime: Output only. The time when the approval decision was
	// made.
	ApprovalTime string `json:"approvalTime,omitempty"`

	// ApproverAccount: Output only. Email of the user that called the
	// ApproveBuild API to approve or reject a build at the time that the
	// API was called.
	ApproverAccount string `json:"approverAccount,omitempty"`

	// Comment: Optional. An optional comment for this manual approval
	// result.
	Comment string `json:"comment,omitempty"`

	// Decision: Required. The decision of this manual approval.
	//
	// Possible values:
	//   "DECISION_UNSPECIFIED" - Default enum type. This should not be
	// used.
	//   "APPROVED" - Build is approved.
	//   "REJECTED" - Build is rejected.
	Decision string `json:"decision,omitempty"`

	// Url: Optional. An optional URL tied to this manual approval result.
	// This field is essentially the same as comment, except that it will be
	// rendered by the UI differently. An example use case is a link to an
	// external job that approved this Build.
	Url string `json:"url,omitempty"`

	// ForceSendFields is a list of field names (e.g. "ApprovalTime") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "ApprovalTime") to include
	// in API requests with the JSON null value. By default, fields with
	// empty values are omitted from API requests. However, any field with
	// an empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type ApproveBuildRequest struct {
	// ApprovalResult: Approval decision and metadata.
	ApprovalResult *ApprovalResult `json:"approvalResult,omitempty"`

	// ForceSendFields is a list of field names (e.g. "ApprovalResult") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "ApprovalResult") to
	// include in API requests with the JSON null value. By default, fields
	// with empty values are omitted from API requests. However, any field
	// with an empty value appearing in NullFields will be sent to the
	// server as null. It is an error if a field in this list has a
	// non-empty value. This may be used to include null fields in Patch
	// requests.
	NullFields []string `json:"-"`
}

type ArtifactObjects struct {
	// Location: Cloud Storage bucket and optional object path, in the form
	// "gs://bucket/path/to/somewhere/". (see Bucket Name Requirements
	// (https://cloud.google.com/storage/docs/bucket-naming#requirements)).
	// Files in the workspace matching any path pattern will be uploaded to
	// Cloud Storage with this location as a prefix.
	Location string `json:"location,omitempty"`

	// Paths: Path globs used to match files in the build's workspace.
	Paths []string `json:"paths,omitempty"`

	// Timing: Output only. Stores timing information for pushing all
	// artifact objects.
	Timing *TimeSpan `json:"timing,omitempty"`

	// ForceSendFields is a list of field names (e.g. "Location") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Location") to include in
	// API requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type ArtifactResult struct {
	// FileHash: The file hash of the artifact.
	FileHash []*FileHashes `json:"fileHash,omitempty"`

	// Location: The path of an artifact in a Cloud Storage bucket, with the
	// generation number. For example,
	// `gs://mybucket/path/to/output.jar#generation`.
	Location string `json:"location,omitempty"`

	// ForceSendFields is a list of field names (e.g. "FileHash") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "FileHash") to include in
	// API requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type Artifacts struct {
	// Images: A list of images to be pushed upon the successful completion
	// of all build steps. The images will be pushed using the builder
	// service account's credentials. The digests of the pushed images will
	// be stored in the Build resource's results field. If any of the images
	// fail to be pushed, the build is marked FAILURE.
	Images []string `json:"images,omitempty"`

	// MavenArtifacts: A list of Maven artifacts to be uploaded to Artifact
	// Registry upon successful completion of all build steps. Artifacts in
	// the workspace matching specified paths globs will be uploaded to the
	// specified Artifact Registry repository using the builder service
	// account's credentials. If any artifacts fail to be pushed, the build
	// is marked FAILURE.
	MavenArtifacts []*MavenArtifact `json:"mavenArtifacts,omitempty"`

	// NpmPackages: A list of npm packages to be uploaded to Artifact
	// Registry upon successful completion of all build steps. Npm packages
	// in the specified paths will be uploaded to the specified Artifact
	// Registry repository using the builder service account's credentials.
	// If any packages fail to be pushed, the build is marked FAILURE.
	NpmPackages []*NpmPackage `json:"npmPackages,omitempty"`

	// Objects: A list of objects to be uploaded to Cloud Storage upon
	// successful completion of all build steps. Files in the workspace
	// matching specified paths globs will be uploaded to the specified
	// Cloud Storage location using the builder service account's
	// credentials. The location and generation of the uploaded objects will
	// be stored in the Build resource's results field. If any objects fail
	// to be pushed, the build is marked FAILURE.
	Objects *ArtifactObjects `json:"objects,omitempty"`

	// PythonPackages: A list of Python packages to be uploaded to Artifact
	// Registry upon successful completion of all build steps. The build
	// service account credentials will be used to perform the upload. If
	// any objects fail to be pushed, the build is marked FAILURE.
	PythonPackages []*PythonPackage `json:"pythonPackages,omitempty"`

	// ForceSendFields is a list of field names (e.g. "Images") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Images") to include in API
	// requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type BatchCreateBitbucketServerConnectedRepositoriesRequest struct {
	// Requests: Required. Requests to connect Bitbucket Server
	// repositories.
	Requests []*CreateBitbucketServerConnectedRepositoryRequest `json:"requests,omitempty"`

	// ForceSendFields is a list of field names (e.g. "Requests") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Requests") to include in
	// API requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type BatchCreateBitbucketServerConnectedRepositoriesResponse struct {
	// BitbucketServerConnectedRepositories: The connected Bitbucket Server
	// repositories.
	BitbucketServerConnectedRepositories []*BitbucketServerConnectedRepository `json:"bitbucketServerConnectedRepositories,omitempty"`

	// ForceSendFields is a list of field names (e.g.
	// "BitbucketServerConnectedRepositories") to unconditionally include in
	// API requests. By default, fields with empty or default values are
	// omitted from API requests. However, any non-pointer, non-interface
	// field appearing in ForceSendFields will be sent to the server
	// regardless of whether the field is empty or not. This may be used to
	// include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g.
	// "BitbucketServerConnectedRepositories") to include in API requests
	// with the JSON null value. By default, fields with empty values are
	// omitted from API requests. However, any field with an empty value
	// appearing in NullFields will be sent to the server as null. It is an
	// error if a field in this list has a non-empty value. This may be used
	// to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type BatchCreateBitbucketServerConnectedRepositoriesResponseMetadata struct {
	// CompleteTime: Time the operation was completed.
	CompleteTime string `json:"completeTime,omitempty"`

	// Config: The name of the `BitbucketServerConfig` that added connected
	// repositories. Format:
	// `projects/{project}/locations/{location}/bitbucketServerConfigs/{confi
	// g}`
	Config string `json:"config,omitempty"`

	// CreateTime: Time the operation was created.
	CreateTime string `json:"createTime,omitempty"`

	// ForceSendFields is a list of field names (e.g. "CompleteTime") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "CompleteTime") to include
	// in API requests with the JSON null value. By default, fields with
	// empty values are omitted from API requests. However, any field with
	// an empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type BatchCreateGitLabConnectedRepositoriesRequest struct {
	// Requests: Required. Requests to connect GitLab repositories.
	Requests []*CreateGitLabConnectedRepositoryRequest `json:"requests,omitempty"`

	// ForceSendFields is a list of field names (e.g. "Requests") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Requests") to include in
	// API requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type BatchCreateGitLabConnectedRepositoriesResponse struct {
	// GitlabConnectedRepositories: The GitLab connected repository
	// requests' responses.
	GitlabConnectedRepositories []*GitLabConnectedRepository `json:"gitlabConnectedRepositories,omitempty"`

	// ForceSendFields is a list of field names (e.g.
	// "GitlabConnectedRepositories") to unconditionally include in API
	// requests. By default, fields with empty or default values are omitted
	// from API requests. However, any non-pointer, non-interface field
	// appearing in ForceSendFields will be sent to the server regardless of
	// whether the field is empty or not. This may be used to include empty
	// fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g.
	// "GitlabConnectedRepositories") to include in API requests with the
	// JSON null value. By default, fields with empty values are omitted
	// from API requests. However, any field with an empty value appearing
	// in NullFields will be sent to the server as null. It is an error if a
	// field in this list has a non-empty value. This may be used to include
	// null fields in Patch requests.
	NullFields []string `json:"-"`
}

type BatchCreateGitLabConnectedRepositoriesResponseMetadata struct {
	// CompleteTime: Time the operation was completed.
	CompleteTime string `json:"completeTime,omitempty"`

	// Config: The name of the `GitLabConfig` that added connected
	// repositories. Format:
	// `projects/{project}/locations/{location}/gitLabConfigs/{config}`
	Config string `json:"config,omitempty"`

	// CreateTime: Time the operation was created.
	CreateTime string `json:"createTime,omitempty"`

	// ForceSendFields is a list of field names (e.g. "CompleteTime") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "CompleteTime") to include
	// in API requests with the JSON null value. By default, fields with
	// empty values are omitted from API requests. However, any field with
	// an empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type BitbucketServerConfig struct {
	// ApiKey: Required. Immutable. API Key that will be attached to
	// webhook. Once this field has been set, it cannot be changed. If you
	// need to change it, please create another BitbucketServerConfig.
	ApiKey string `json:"apiKey,omitempty"`

	// ConnectedRepositories: Output only. Connected Bitbucket Server
	// repositories for this config.
	ConnectedRepositories []*BitbucketServerRepositoryId `json:"connectedRepositories,omitempty"`

	// CreateTime: Time when the config was created.
	CreateTime string `json:"createTime,omitempty"`

	// HostUri: Required. Immutable. The URI of the Bitbucket Server host.
	// Once this field has been set, it cannot be changed. If you need to
	// change it, please create another BitbucketServerConfig.
	HostUri string `json:"hostUri,omitempty"`

	// Name: The resource name for the config.
	Name string `json:"name,omitempty"`

	// PeeredNetwork: Optional. The network to be used when reaching out to
	// the Bitbucket Server instance. The VPC network must be enabled for
	// private service connection. This should be set if the Bitbucket
	// Server instance is hosted on-premises and not reachable by public
	// internet. If this field is left empty, no network peering will occur
	// and calls to the Bitbucket Server instance will be made over the
	// public internet. Must be in the format
	// `projects/{project}/global/networks/{network}`, where {project} is a
	// project number or id and {network} is the name of a VPC network in
	// the project.
	PeeredNetwork string `json:"peeredNetwork,omitempty"`

	// PeeredNetworkIpRange: Immutable. IP range within the peered network.
	// This is specified in CIDR notation with a slash and the subnet prefix
	// size. You can optionally specify an IP address before the subnet
	// prefix value. e.g. `192.168.0.0/29` would specify an IP range
	// starting at 192.168.0.0 with a 29 bit prefix size. `/16` would
	// specify a prefix size of 16 bits, with an automatically determined IP
	// within the peered VPC. If unspecified, a value of `/24` will be used.
	// The field only has an effect if peered_network is set.
	PeeredNetworkIpRange string `json:"peeredNetworkIpRange,omitempty"`

	// Secrets: Required. Secret Manager secrets needed by the config.
	Secrets *BitbucketServerSecrets `json:"secrets,omitempty"`

	// SslCa: Optional. SSL certificate to use for requests to Bitbucket
	// Server. The format should be PEM format but the extension can be one
	// of .pem, .cer, or .crt.
	SslCa string `json:"sslCa,omitempty"`

	// Username: Username of the account Cloud Build will use on Bitbucket
	// Server.
	Username string `json:"username,omitempty"`

	// WebhookKey: Output only. UUID included in webhook requests. The UUID
	// is used to look up the corresponding config.
	WebhookKey string `json:"webhookKey,omitempty"`

	// ServerResponse contains the HTTP response code and headers from the
	// server.
	googleapi.ServerResponse `json:"-"`

	// ForceSendFields is a list of field names (e.g. "ApiKey") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "ApiKey") to include in API
	// requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type BitbucketServerConnectedRepository struct {
	// Parent: The name of the `BitbucketServerConfig` that added connected
	// repository. Format:
	// `projects/{project}/locations/{location}/bitbucketServerConfigs/{confi
	// g}`
	Parent string `json:"parent,omitempty"`

	// Repo: The Bitbucket Server repositories to connect.
	Repo *BitbucketServerRepositoryId `json:"repo,omitempty"`

	// Status: Output only. The status of the repo connection request.
	Status *Status `json:"status,omitempty"`

	// ForceSendFields is a list of field names (e.g. "Parent") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Parent") to include in API
	// requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type BitbucketServerRepository struct {
	// BrowseUri: Link to the browse repo page on the Bitbucket Server
	// instance.
	BrowseUri string `json:"browseUri,omitempty"`

	// Description: Description of the repository.
	Description string `json:"description,omitempty"`

	// DisplayName: Display name of the repository.
	DisplayName string `json:"displayName,omitempty"`

	// Name: The resource name of the repository.
	Name string `json:"name,omitempty"`

	// RepoId: Identifier for a repository hosted on a Bitbucket Server.
	RepoId *BitbucketServerRepositoryId `json:"repoId,omitempty"`

	// ForceSendFields is a list of field names (e.g. "BrowseUri") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "BrowseUri") to include in
	// API requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type BitbucketServerRepositoryId struct {
	// ProjectKey: Required. Identifier for the project storing the
	// repository.
	ProjectKey string `json:"projectKey,omitempty"`

	// RepoSlug: Required. Identifier for the repository.
	RepoSlug string `json:"repoSlug,omitempty"`

	// WebhookId: Output only. The ID of the webhook that was created for
	// receiving events from this repo. We only create and manage a single
	// webhook for each repo.
	WebhookId int64 `json:"webhookId,omitempty"`

	// ForceSendFields is a list of field names (e.g. "ProjectKey") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "ProjectKey") to include in
	// API requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type BitbucketServerSecrets struct {
	// AdminAccessTokenVersionName: Required. The resource name for the
	// admin access token's secret version.
	AdminAccessTokenVersionName string `json:"adminAccessTokenVersionName,omitempty"`

	// ReadAccessTokenVersionName: Required. The resource name for the read
	// access token's secret version.
	ReadAccessTokenVersionName string `json:"readAccessTokenVersionName,omitempty"`

	// WebhookSecretVersionName: Required. Immutable. The resource name for
	// the webhook secret's secret version. Once this field has been set, it
	// cannot be changed. If you need to change it, please create another
	// BitbucketServerConfig.
	WebhookSecretVersionName string `json:"webhookSecretVersionName,omitempty"`

	// ForceSendFields is a list of field names (e.g.
	// "AdminAccessTokenVersionName") to unconditionally include in API
	// requests. By default, fields with empty or default values are omitted
	// from API requests. However, any non-pointer, non-interface field
	// appearing in ForceSendFields will be sent to the server regardless of
	// whether the field is empty or not. This may be used to include empty
	// fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g.
	// "AdminAccessTokenVersionName") to include in API requests with the
	// JSON null value. By default, fields with empty values are omitted
	// from API requests. However, any field with an empty value appearing
	// in NullFields will be sent to the server as null. It is an error if a
	// field in this list has a non-empty value. This may be used to include
	// null fields in Patch requests.
	NullFields []string `json:"-"`
}

type BitbucketServerTriggerConfig struct {
	// BitbucketServerConfig: Output only. The BitbucketServerConfig
	// specified in the bitbucket_server_config_resource field.
	BitbucketServerConfig *BitbucketServerConfig `json:"bitbucketServerConfig,omitempty"`

	// BitbucketServerConfigResource: Required. The Bitbucket server config
	// resource that this trigger config maps to.
	BitbucketServerConfigResource string `json:"bitbucketServerConfigResource,omitempty"`

	// ProjectKey: Required. Key of the project that the repo is in. For
	// example: The key for
	// https://mybitbucket.server/projects/TEST/repos/test-repo is "TEST".
	ProjectKey string `json:"projectKey,omitempty"`

	// PullRequest: Filter to match changes in pull requests.
	PullRequest *PullRequestFilter `json:"pullRequest,omitempty"`

	// Push: Filter to match changes in refs like branches, tags.
	Push *PushFilter `json:"push,omitempty"`

	// RepoSlug: Required. Slug of the repository. A repository slug is a
	// URL-friendly version of a repository name, automatically generated by
	// Bitbucket for use in the URL. For example, if the repository name is
	// 'test repo', in the URL it would become 'test-repo' as in
	// https://mybitbucket.server/projects/TEST/repos/test-repo.
	RepoSlug string `json:"repoSlug,omitempty"`

	// ForceSendFields is a list of field names (e.g.
	// "BitbucketServerConfig") to unconditionally include in API requests.
	// By default, fields with empty or default values are omitted from API
	// requests. However, any non-pointer, non-interface field appearing in
	// ForceSendFields will be sent to the server regardless of whether the
	// field is empty or not. This may be used to include empty fields in
	// Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "BitbucketServerConfig") to
	// include in API requests with the JSON null value. By default, fields
	// with empty values are omitted from API requests. However, any field
	// with an empty value appearing in NullFields will be sent to the
	// server as null. It is an error if a field in this list has a
	// non-empty value. This may be used to include null fields in Patch
	// requests.
	NullFields []string `json:"-"`
}

type Build struct {
	// Approval: Output only. Describes this build's approval configuration,
	// status, and result.
	Approval *BuildApproval `json:"approval,omitempty"`

	// Artifacts: Artifacts produced by the build that should be uploaded
	// upon successful completion of all build steps.
	Artifacts *Artifacts `json:"artifacts,omitempty"`

	// AvailableSecrets: Secrets and secret environment variables.
	AvailableSecrets *Secrets `json:"availableSecrets,omitempty"`

	// BuildTriggerId: Output only. The ID of the `BuildTrigger` that
	// triggered this build, if it was triggered automatically.
	BuildTriggerId string `json:"buildTriggerId,omitempty"`

	// CreateTime: Output only. Time at which the request to create the
	// build was received.
	CreateTime string `json:"createTime,omitempty"`

	// FailureInfo: Output only. Contains information about the build when
	// status=FAILURE.
	FailureInfo *FailureInfo `json:"failureInfo,omitempty"`

	// FinishTime: Output only. Time at which execution of the build was
	// finished. The difference between finish_time and start_time is the
	// duration of the build's execution.
	FinishTime string `json:"finishTime,omitempty"`

	// Id: Output only. Unique identifier of the build.
	Id string `json:"id,omitempty"`

	// Images: A list of images to be pushed upon the successful completion
	// of all build steps. The images are pushed using the builder service
	// account's credentials. The digests of the pushed images will be
	// stored in the `Build` resource's results field. If any of the images
	// fail to be pushed, the build status is marked `FAILURE`.
	Images []string `json:"images,omitempty"`

	// LogUrl: Output only. URL to logs for this build in Google Cloud
	// Console.
	LogUrl string `json:"logUrl,omitempty"`

	// LogsBucket: Cloud Storage bucket where logs should be written (see
	// Bucket Name Requirements
	// (https://cloud.google.com/storage/docs/bucket-naming#requirements)).
	// Logs file names will be of the format
	// `${logs_bucket}/log-${build_id}.txt`.
	LogsBucket string `json:"logsBucket,omitempty"`

	// Name: Output only. The 'Build' name with format:
	// `projects/{project}/locations/{location}/builds/{build}`, where
	// {build} is a unique identifier generated by the service.
	Name string `json:"name,omitempty"`

	// Options: Special options for this build.
	Options *BuildOptions `json:"options,omitempty"`

	// ProjectId: Output only. ID of the project.
	ProjectId string `json:"projectId,omitempty"`

	// QueueTtl: TTL in queue for this build. If provided and the build is
	// enqueued longer than this value, the build will expire and the build
	// status will be `EXPIRED`. The TTL starts ticking from create_time.
	QueueTtl string `json:"queueTtl,omitempty"`

	// Results: Output only. Results of the build.
	Results *Results `json:"results,omitempty"`

	// Secrets: Secrets to decrypt using Cloud Key Management Service. Note:
	// Secret Manager is the recommended technique for managing sensitive
	// data with Cloud Build. Use `available_secrets` to configure builds to
	// access secrets from Secret Manager. For instructions, see:
	// https://cloud.google.com/cloud-build/docs/securing-builds/use-secrets
	Secrets []*Secret `json:"secrets,omitempty"`

	// ServiceAccount: IAM service account whose credentials will be used at
	// build runtime. Must be of the format
	// `projects/{PROJECT_ID}/serviceAccounts/{ACCOUNT}`. ACCOUNT can be
	// email address or uniqueId of the service account.
	ServiceAccount string `json:"serviceAccount,omitempty"`

	// Source: The location of the source files to build.
	Source *Source `json:"source,omitempty"`

	// SourceProvenance: Output only. A permanent fixed identifier for
	// source.
	SourceProvenance *SourceProvenance `json:"sourceProvenance,omitempty"`

	// StartTime: Output only. Time at which execution of the build was
	// started.
	StartTime string `json:"startTime,omitempty"`

	// Status: Output only. Status of the build.
	//
	// Possible values:
	//   "STATUS_UNKNOWN" - Status of the build is unknown.
	//   "PENDING" - Build has been created and is pending execution and
	// queuing. It has not been queued.
	//   "QUEUED" - Build or step is queued; work has not yet begun.
	//   "WORKING" - Build or step is being executed.
	//   "SUCCESS" - Build or step finished successfully.
	//   "FAILURE" - Build or step failed to complete successfully.
	//   "INTERNAL_ERROR" - Build or step failed due to an internal cause.
	//   "TIMEOUT" - Build or step took longer than was allowed.
	//   "CANCELLED" - Build or step was canceled by a user.
	//   "EXPIRED" - Build was enqueued for longer than the value of
	// `queue_ttl`.
	Status string `json:"status,omitempty"`

	// StatusDetail: Output only. Customer-readable message about the
	// current status.
	StatusDetail string `json:"statusDetail,omitempty"`

	// Steps: Required. The operations to be performed on the workspace.
	Steps []*BuildStep `json:"steps,omitempty"`

	// Substitutions: Substitutions data for `Build` resource.
	Substitutions map[string]string `json:"substitutions,omitempty"`

	// Tags: Tags for annotation of a `Build`. These are not docker tags.
	Tags []string `json:"tags,omitempty"`

	// Timeout: Amount of time that this build should be allowed to run, to
	// second granularity. If this amount of time elapses, work on the build
	// will cease and the build status will be `TIMEOUT`. `timeout` starts
	// ticking from `startTime`. Default time is 60 minutes.
	Timeout string `json:"timeout,omitempty"`

	// Timing: Output only. Stores timing information for phases of the
	// build. Valid keys are: * BUILD: time to execute all build steps. *
	// PUSH: time to push all artifacts including docker images and non
	// docker artifacts. * FETCHSOURCE: time to fetch source. * SETUPBUILD:
	// time to set up build. If the build does not specify source or images,
	// these keys will not be included.
	Timing map[string]TimeSpan `json:"timing,omitempty"`

	// Warnings: Output only. Non-fatal problems encountered during the
	// execution of the build.
	Warnings []*Warning `json:"warnings,omitempty"`

	// ServerResponse contains the HTTP response code and headers from the
	// server.
	googleapi.ServerResponse `json:"-"`

	// ForceSendFields is a list of field names (e.g. "Approval") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Approval") to include in
	// API requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type BuildApproval struct {
	// Config: Output only. Configuration for manual approval of this build.
	Config *ApprovalConfig `json:"config,omitempty"`

	// Result: Output only. Result of manual approval for this Build.
	Result *ApprovalResult `json:"result,omitempty"`

	// State: Output only. The state of this build's approval.
	//
	// Possible values:
	//   "STATE_UNSPECIFIED" - Default enum type. This should not be used.
	//   "PENDING" - Build approval is pending.
	//   "APPROVED" - Build approval has been approved.
	//   "REJECTED" - Build approval has been rejected.
	//   "CANCELLED" - Build was cancelled while it was still pending
	// approval.
	State string `json:"state,omitempty"`

	// ForceSendFields is a list of field names (e.g. "Config") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Config") to include in API
	// requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type BuildOperationMetadata struct {
	// Build: The build that the operation is tracking.
	Build *Build `json:"build,omitempty"`

	// ForceSendFields is a list of field names (e.g. "Build") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Build") to include in API
	// requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type BuildOptions struct {
	// AutomapSubstitutions: Option to include built-in and custom
	// substitutions as env variables for all build steps.
	AutomapSubstitutions bool `json:"automapSubstitutions,omitempty"`

	// DefaultLogsBucketBehavior: Optional. Option to specify how default
	// logs buckets are setup.
	//
	// Possible values:
	//   "DEFAULT_LOGS_BUCKET_BEHAVIOR_UNSPECIFIED" - Unspecified.
	//   "REGIONAL_USER_OWNED_BUCKET" - Bucket is located in user-owned
	// project in the same region as the build. The builder service account
	// must have access to create and write to Cloud Storage buckets in the
	// build project.
	DefaultLogsBucketBehavior string `json:"defaultLogsBucketBehavior,omitempty"`

	// DiskSizeGb: Requested disk size for the VM that runs the build. Note
	// that this is *NOT* "disk free"; some of the space will be used by the
	// operating system and build utilities. Also note that this is the
	// minimum disk size that will be allocated for the build -- the build
	// may run with a larger disk than requested. At present, the maximum
	// disk size is 2000GB; builds that request more than the maximum are
	// rejected with an error.
	DiskSizeGb int64 `json:"diskSizeGb,omitempty,string"`

	// DynamicSubstitutions: Option to specify whether or not to apply bash
	// style string operations to the substitutions. NOTE: this is always
	// enabled for triggered builds and cannot be overridden in the build
	// configuration file.
	DynamicSubstitutions bool `json:"dynamicSubstitutions,omitempty"`

	// Env: A list of global environment variable definitions that will
	// exist for all build steps in this build. If a variable is defined in
	// both globally and in a build step, the variable will use the build
	// step value. The elements are of the form "KEY=VALUE" for the
	// environment variable "KEY" being given the value "VALUE".
	Env []string `json:"env,omitempty"`

	// LogStreamingOption: Option to define build log streaming behavior to
	// Cloud Storage.
	//
	// Possible values:
	//   "STREAM_DEFAULT" - Service may automatically determine build log
	// streaming behavior.
	//   "STREAM_ON" - Build logs should be streamed to Cloud Storage.
	//   "STREAM_OFF" - Build logs should not be streamed to Cloud Storage;
	// they will be written when the build is completed.
	LogStreamingOption string `json:"logStreamingOption,omitempty"`

	// Logging: Option to specify the logging mode, which determines if and
	// where build logs are stored.
	//
	// Possible values:
	//   "LOGGING_UNSPECIFIED" - The service determines the logging mode.
	// The default is `LEGACY`. Do not rely on the default logging behavior
	// as it may change in the future.
	//   "LEGACY" - Build logs are stored in Cloud Logging and Cloud
	// Storage.
	//   "GCS_ONLY" - Build logs are stored in Cloud Storage.
	//   "STACKDRIVER_ONLY" - This option is the same as CLOUD_LOGGING_ONLY.
	//   "CLOUD_LOGGING_ONLY" - Build logs are stored in Cloud Logging.
	// Selecting this option will not allow [logs
	// streaming](https://cloud.google.com/sdk/gcloud/reference/builds/log).
	//   "NONE" - Turn off all logging. No build logs will be captured.
	Logging string `json:"logging,omitempty"`

	// MachineType: Compute Engine machine type on which to run the build.
	//
	// Possible values:
	//   "UNSPECIFIED" - Standard machine type.
	//   "N1_HIGHCPU_8" - Highcpu machine with 8 CPUs.
	//   "N1_HIGHCPU_32" - Highcpu machine with 32 CPUs.
	//   "E2_HIGHCPU_8" - Highcpu e2 machine with 8 CPUs.
	//   "E2_HIGHCPU_32" - Highcpu e2 machine with 32 CPUs.
	//   "E2_MEDIUM" - E2 machine with 1 CPU.
	MachineType string `json:"machineType,omitempty"`

	// Pool: Optional. Specification for execution on a `WorkerPool`. See
	// running builds in a private pool
	// (https://cloud.google.com/build/docs/private-pools/run-builds-in-private-pool)
	// for more information.
	Pool *PoolOption `json:"pool,omitempty"`

	// RequestedVerifyOption: Requested verifiability options.
	//
	// Possible values:
	//   "NOT_VERIFIED" - Not a verifiable build (the default).
	//   "VERIFIED" - Build must be verified.
	RequestedVerifyOption string `json:"requestedVerifyOption,omitempty"`

	// SecretEnv: A list of global environment variables, which are
	// encrypted using a Cloud Key Management Service crypto key. These
	// values must be specified in the build's `Secret`. These variables
	// will be available to all build steps in this build.
	SecretEnv []string `json:"secretEnv,omitempty"`

	// SourceProvenanceHash: Requested hash for SourceProvenance.
	//
	// Possible values:
	//   "NONE" - No hash requested.
	//   "SHA256" - Use a sha256 hash.
	//   "MD5" - Use a md5 hash.
	//   "SHA512" - Use a sha512 hash.
	SourceProvenanceHash []string `json:"sourceProvenanceHash,omitempty"`

	// SubstitutionOption: Option to specify behavior when there is an error
	// in the substitution checks. NOTE: this is always set to ALLOW_LOOSE
	// for triggered builds and cannot be overridden in the build
	// configuration file.
	//
	// Possible values:
	//   "MUST_MATCH" - Fails the build if error in substitutions checks,
	// like missing a substitution in the template or in the map.
	//   "ALLOW_LOOSE" - Do not fail the build if error in substitutions
	// checks.
	SubstitutionOption string `json:"substitutionOption,omitempty"`

	// Volumes: Global list of volumes to mount for ALL build steps Each
	// volume is created as an empty volume prior to starting the build
	// process. Upon completion of the build, volumes and their contents are
	// discarded. Global volume names and paths cannot conflict with the
	// volumes defined a build step. Using a global volume in a build with
	// only one step is not valid as it is indicative of a build request
	// with an incorrect configuration.
	Volumes []*Volume `json:"volumes,omitempty"`

	// WorkerPool: This field deprecated; please use `pool.name` instead.
	WorkerPool string `json:"workerPool,omitempty"`

	// ForceSendFields is a list of field names (e.g.
	// "AutomapSubstitutions") to unconditionally include in API requests.
	// By default, fields with empty or default values are omitted from API
	// requests. However, any non-pointer, non-interface field appearing in
	// ForceSendFields will be sent to the server regardless of whether the
	// field is empty or not. This may be used to include empty fields in
	// Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "AutomapSubstitutions") to
	// include in API requests with the JSON null value. By default, fields
	// with empty values are omitted from API requests. However, any field
	// with an empty value appearing in NullFields will be sent to the
	// server as null. It is an error if a field in this list has a
	// non-empty value. This may be used to include null fields in Patch
	// requests.
	NullFields []string `json:"-"`
}

type BuildStep struct {
	// AllowExitCodes: Allow this build step to fail without failing the
	// entire build if and only if the exit code is one of the specified
	// codes. If allow_failure is also specified, this field will take
	// precedence.
	AllowExitCodes []int64 `json:"allowExitCodes,omitempty"`

	// AllowFailure: Allow this build step to fail without failing the
	// entire build. If false, the entire build will fail if this step
	// fails. Otherwise, the build will succeed, but this step will still
	// have a failure status. Error information will be reported in the
	// failure_detail field.
	AllowFailure bool `json:"allowFailure,omitempty"`

	// Args: A list of arguments that will be presented to the step when it
	// is started. If the image used to run the step's container has an
	// entrypoint, the `args` are used as arguments to that entrypoint. If
	// the image does not define an entrypoint, the first element in args is
	// used as the entrypoint, and the remainder will be used as arguments.
	Args []string `json:"args,omitempty"`

	// AutomapSubstitutions: Option to include built-in and custom
	// substitutions as env variables for this build step. This option will
	// override the global option in BuildOption.
	AutomapSubstitutions bool `json:"automapSubstitutions,omitempty"`

	// Dir: Working directory to use when running this step's container. If
	// this value is a relative path, it is relative to the build's working
	// directory. If this value is absolute, it may be outside the build's
	// working directory, in which case the contents of the path may not be
	// persisted across build step executions, unless a `volume` for that
	// path is specified. If the build specifies a `RepoSource` with `dir`
	// and a step with a `dir`, which specifies an absolute path, the
	// `RepoSource` `dir` is ignored for the step's execution.
	Dir string `json:"dir,omitempty"`

	// Entrypoint: Entrypoint to be used instead of the build step image's
	// default entrypoint. If unset, the image's default entrypoint is used.
	Entrypoint string `json:"entrypoint,omitempty"`

	// Env: A list of environment variable definitions to be used when
	// running a step. The elements are of the form "KEY=VALUE" for the
	// environment variable "KEY" being given the value "VALUE".
	Env []string `json:"env,omitempty"`

	// ExitCode: Output only. Return code from running the step.
	ExitCode int64 `json:"exitCode,omitempty"`

	// Id: Unique identifier for this build step, used in `wait_for` to
	// reference this build step as a dependency.
	Id string `json:"id,omitempty"`

	// Name: Required. The name of the container image that will run this
	// particular build step. If the image is available in the host's Docker
	// daemon's cache, it will be run directly. If not, the host will
	// attempt to pull the image first, using the builder service account's
	// credentials if necessary. The Docker daemon's cache will already have
	// the latest versions of all of the officially supported build steps
	// (https://github.com/GoogleCloudPlatform/cloud-builders
	// (https://github.com/GoogleCloudPlatform/cloud-builders)). The Docker
	// daemon will also have cached many of the layers for some popular
	// images, like "ubuntu", "debian", but they will be refreshed at the
	// time you attempt to use them. If you built an image in a previous
	// build step, it will be stored in the host's Docker daemon's cache and
	// is available to use as the name for a later build step.
	Name string `json:"name,omitempty"`

	// PullTiming: Output only. Stores timing information for pulling this
	// build step's builder image only.
	PullTiming *TimeSpan `json:"pullTiming,omitempty"`

	// Script: A shell script to be executed in the step. When script is
	// provided, the user cannot specify the entrypoint or args.
	Script string `json:"script,omitempty"`

	// SecretEnv: A list of environment variables which are encrypted using
	// a Cloud Key Management Service crypto key. These values must be
	// specified in the build's `Secret`.
	SecretEnv []string `json:"secretEnv,omitempty"`

	// Status: Output only. Status of the build step. At this time, build
	// step status is only updated on build completion; step status is not
	// updated in real-time as the build progresses.
	//
	// Possible values:
	//   "STATUS_UNKNOWN" - Status of the build is unknown.
	//   "PENDING" - Build has been created and is pending execution and
	// queuing. It has not been queued.
	//   "QUEUED" - Build or step is queued; work has not yet begun.
	//   "WORKING" - Build or step is being executed.
	//   "SUCCESS" - Build or step finished successfully.
	//   "FAILURE" - Build or step failed to complete successfully.
	//   "INTERNAL_ERROR" - Build or step failed due to an internal cause.
	//   "TIMEOUT" - Build or step took longer than was allowed.
	//   "CANCELLED" - Build or step was canceled by a user.
	//   "EXPIRED" - Build was enqueued for longer than the value of
	// `queue_ttl`.
	Status string `json:"status,omitempty"`

	// Timeout: Time limit for executing this build step. If not defined,
	// the step has no time limit and will be allowed to continue to run
	// until either it completes or the build itself times out.
	Timeout string `json:"timeout,omitempty"`

	// Timing: Output only. Stores timing information for executing this
	// build step.
	Timing *TimeSpan `json:"timing,omitempty"`

	// Volumes: List of volumes to mount into the build step. Each volume is
	// created as an empty volume prior to execution of the build step. Upon
	// completion of the build, volumes and their contents are discarded.
	// Using a named volume in only one step is not valid as it is
	// indicative of a build request with an incorrect configuration.
	Volumes []*Volume `json:"volumes,omitempty"`

	// WaitFor: The ID(s) of the step(s) that this build step depends on.
	// This build step will not start until all the build steps in
	// `wait_for` have completed successfully. If `wait_for` is empty, this
	// build step will start when all previous build steps in the
	// `Build.Steps` list have completed successfully.
	WaitFor []string `json:"waitFor,omitempty"`

	// ForceSendFields is a list of field names (e.g. "AllowExitCodes") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "AllowExitCodes") to
	// include in API requests with the JSON null value. By default, fields
	// with empty values are omitted from API requests. However, any field
	// with an empty value appearing in NullFields will be sent to the
	// server as null. It is an error if a field in this list has a
	// non-empty value. This may be used to include null fields in Patch
	// requests.
	NullFields []string `json:"-"`
}

type BuildTrigger struct {
	// ApprovalConfig: Configuration for manual approval to start a build
	// invocation of this BuildTrigger.
	ApprovalConfig *ApprovalConfig `json:"approvalConfig,omitempty"`

	// Autodetect: Autodetect build configuration. The following precedence
	// is used (case insensitive): 1. cloudbuild.yaml 2. cloudbuild.yml 3.
	// cloudbuild.json 4. Dockerfile Currently only available for GitHub App
	// Triggers.
	Autodetect bool `json:"autodetect,omitempty"`

	// BitbucketServerTriggerConfig: BitbucketServerTriggerConfig describes
	// the configuration of a trigger that creates a build whenever a
	// Bitbucket Server event is received.
	BitbucketServerTriggerConfig *BitbucketServerTriggerConfig `json:"bitbucketServerTriggerConfig,omitempty"`

	// Build: Contents of the build template.
	Build *Build `json:"build,omitempty"`

	// CreateTime: Output only. Time when the trigger was created.
	CreateTime string `json:"createTime,omitempty"`

	// Description: Human-readable description of this trigger.
	Description string `json:"description,omitempty"`

	// Disabled: If true, the trigger will never automatically execute a
	// build.
	Disabled bool `json:"disabled,omitempty"`

	// EventType: EventType allows the user to explicitly set the type of
	// event to which this BuildTrigger should respond. This field will be
	// validated against the rest of the configuration if it is set.
	//
	// Possible values:
	//   "EVENT_TYPE_UNSPECIFIED" - EVENT_TYPE_UNSPECIFIED event_types are
	// ignored.
	//   "REPO" - REPO corresponds to the supported VCS integrations.
	//   "WEBHOOK" - WEBHOOK corresponds to webhook triggers.
	//   "PUBSUB" - PUBSUB corresponds to pubsub triggers.
	//   "MANUAL" - MANUAL corresponds to manual-only invoked triggers.
	EventType string `json:"eventType,omitempty"`

	// Filename: Path, from the source root, to the build configuration file
	// (i.e. cloudbuild.yaml).
	Filename string `json:"filename,omitempty"`

	// Filter: A Common Expression Language string.
	Filter string `json:"filter,omitempty"`

	// GitFileSource: The file source describing the local or remote Build
	// template.
	GitFileSource *GitFileSource `json:"gitFileSource,omitempty"`

	// Github: GitHubEventsConfig describes the configuration of a trigger
	// that creates a build whenever a GitHub event is received. Mutually
	// exclusive with `trigger_template`.
	Github *GitHubEventsConfig `json:"github,omitempty"`

	// GitlabEnterpriseEventsConfig: GitLabEnterpriseEventsConfig describes
	// the configuration of a trigger that creates a build whenever a GitLab
	// Enterprise event is received.
	GitlabEnterpriseEventsConfig *GitLabEventsConfig `json:"gitlabEnterpriseEventsConfig,omitempty"`

	// Id: Output only. Unique identifier of the trigger.
	Id string `json:"id,omitempty"`

	// IgnoredFiles: ignored_files and included_files are file glob matches
	// using https://golang.org/pkg/path/filepath/#Match extended with
	// support for "**". If ignored_files and changed files are both empty,
	// then they are not used to determine whether or not to trigger a
	// build. If ignored_files is not empty, then we ignore any files that
	// match any of the ignored_file globs. If the change has no files that
	// are outside of the ignored_files globs, then we do not trigger a
	// build.
	IgnoredFiles []string `json:"ignoredFiles,omitempty"`

	// IncludeBuildLogs: If set to INCLUDE_BUILD_LOGS_WITH_STATUS, log url
	// will be shown on GitHub page when build status is final. Setting this
	// field to INCLUDE_BUILD_LOGS_WITH_STATUS for non GitHub triggers
	// results in INVALID_ARGUMENT error.
	//
	// Possible values:
	//   "INCLUDE_BUILD_LOGS_UNSPECIFIED" - Build logs will not be shown on
	// GitHub.
	//   "INCLUDE_BUILD_LOGS_WITH_STATUS" - Build logs will be shown on
	// GitHub.
	IncludeBuildLogs string `json:"includeBuildLogs,omitempty"`

	// IncludedFiles: If any of the files altered in the commit pass the
	// ignored_files filter and included_files is empty, then as far as this
	// filter is concerned, we should trigger the build. If any of the files
	// altered in the commit pass the ignored_files filter and
	// included_files is not empty, then we make sure that at least one of
	// those files matches a included_files glob. If not, then we do not
	// trigger a build.
	IncludedFiles []string `json:"includedFiles,omitempty"`

	// Name: User-assigned name of the trigger. Must be unique within the
	// project. Trigger names must meet the following requirements: + They
	// must contain only alphanumeric characters and dashes. + They can be
	// 1-64 characters long. + They must begin and end with an alphanumeric
	// character.
	Name string `json:"name,omitempty"`

	// PubsubConfig: PubsubConfig describes the configuration of a trigger
	// that creates a build whenever a Pub/Sub message is published.
	PubsubConfig *PubsubConfig `json:"pubsubConfig,omitempty"`

	// RepositoryEventConfig: The configuration of a trigger that creates a
	// build whenever an event from Repo API is received.
	RepositoryEventConfig *RepositoryEventConfig `json:"repositoryEventConfig,omitempty"`

	// ResourceName: The `Trigger` name with format:
	// `projects/{project}/locations/{location}/triggers/{trigger}`, where
	// {trigger} is a unique identifier generated by the service.
	ResourceName string `json:"resourceName,omitempty"`

	// ServiceAccount: The service account used for all user-controlled
	// operations including UpdateBuildTrigger, RunBuildTrigger,
	// CreateBuild, and CancelBuild. If no service account is set, then the
	// standard Cloud Build service account
	// ([PROJECT_NUM]@system.gserviceaccount.com) will be used instead.
	// Format: `projects/{PROJECT_ID}/serviceAccounts/{ACCOUNT_ID_OR_EMAIL}`
	ServiceAccount string `json:"serviceAccount,omitempty"`

	// SourceToBuild: The repo and ref of the repository from which to
	// build. This field is used only for those triggers that do not respond
	// to SCM events. Triggers that respond to such events build source at
	// whatever commit caused the event. This field is currently only used
	// by Webhook, Pub/Sub, Manual, and Cron triggers.
	SourceToBuild *GitRepoSource `json:"sourceToBuild,omitempty"`

	// Substitutions: Substitutions for Build resource. The keys must match
	// the following regular expression: `^_[A-Z0-9_]+$`.
	Substitutions map[string]string `json:"substitutions,omitempty"`

	// Tags: Tags for annotation of a `BuildTrigger`
	Tags []string `json:"tags,omitempty"`

	// TriggerTemplate: Template describing the types of source changes to
	// trigger a build. Branch and tag names in trigger templates are
	// interpreted as regular expressions. Any branch or tag change that
	// matches that regular expression will trigger a build. Mutually
	// exclusive with `github`.
	TriggerTemplate *RepoSource `json:"triggerTemplate,omitempty"`

	// WebhookConfig: WebhookConfig describes the configuration of a trigger
	// that creates a build whenever a webhook is sent to a trigger's
	// webhook URL.
	WebhookConfig *WebhookConfig `json:"webhookConfig,omitempty"`

	// ServerResponse contains the HTTP response code and headers from the
	// server.
	googleapi.ServerResponse `json:"-"`

	// ForceSendFields is a list of field names (e.g. "ApprovalConfig") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "ApprovalConfig") to
	// include in API requests with the JSON null value. By default, fields
	// with empty values are omitted from API requests. However, any field
	// with an empty value appearing in NullFields will be sent to the
	// server as null. It is an error if a field in this list has a
	// non-empty value. This may be used to include null fields in Patch
	// requests.
	NullFields []string `json:"-"`
}

type BuiltImage struct {
	// Digest: Docker Registry 2.0 digest.
	Digest string `json:"digest,omitempty"`

	// Name: Name used to push the container image to Google Container
	// Registry, as presented to `docker push`.
	Name string `json:"name,omitempty"`

	// PushTiming: Output only. Stores timing information for pushing the
	// specified image.
	PushTiming *TimeSpan `json:"pushTiming,omitempty"`

	// ForceSendFields is a list of field names (e.g. "Digest") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Digest") to include in API
	// requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type CancelBuildRequest struct {
	// Id: Required. ID of the build.
	Id string `json:"id,omitempty"`

	// Name: The name of the `Build` to cancel. Format:
	// `projects/{project}/locations/{location}/builds/{build}`
	Name string `json:"name,omitempty"`

	// ProjectId: Required. ID of the project.
	ProjectId string `json:"projectId,omitempty"`

	// ForceSendFields is a list of field names (e.g. "Id") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Id") to include in API
	// requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type CancelOperationRequest struct {
}

type ConnectedRepository struct {
	// Dir: Directory, relative to the source root, in which to run the
	// build.
	Dir string `json:"dir,omitempty"`

	// Repository: Required. Name of the Google Cloud Build repository,
	// formatted as `projects/*/locations/*/connections/*/repositories/*`.
	Repository string `json:"repository,omitempty"`

	// Revision: The revision to fetch from the Git repository such as a
	// branch, a tag, a commit SHA, or any Git ref.
	Revision string `json:"revision,omitempty"`

	// ForceSendFields is a list of field names (e.g. "Dir") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Dir") to include in API
	// requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type CreateBitbucketServerConfigOperationMetadata struct {
	// BitbucketServerConfig: The resource name of the BitbucketServerConfig
	// to be created. Format:
	// `projects/{project}/locations/{location}/bitbucketServerConfigs/{id}`.
	BitbucketServerConfig string `json:"bitbucketServerConfig,omitempty"`

	// CompleteTime: Time the operation was completed.
	CompleteTime string `json:"completeTime,omitempty"`

	// CreateTime: Time the operation was created.
	CreateTime string `json:"createTime,omitempty"`

	// ForceSendFields is a list of field names (e.g.
	// "BitbucketServerConfig") to unconditionally include in API requests.
	// By default, fields with empty or default values are omitted from API
	// requests. However, any non-pointer, non-interface field appearing in
	// ForceSendFields will be sent to the server regardless of whether the
	// field is empty or not. This may be used to include empty fields in
	// Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "BitbucketServerConfig") to
	// include in API requests with the JSON null value. By default, fields
	// with empty values are omitted from API requests. However, any field
	// with an empty value appearing in NullFields will be sent to the
	// server as null. It is an error if a field in this list has a
	// non-empty value. This may be used to include null fields in Patch
	// requests.
	NullFields []string `json:"-"`
}

type CreateBitbucketServerConnectedRepositoryRequest struct {
	// BitbucketServerConnectedRepository: Required. The Bitbucket Server
	// repository to connect.
	BitbucketServerConnectedRepository *BitbucketServerConnectedRepository `json:"bitbucketServerConnectedRepository,omitempty"`

	// Parent: Required. The name of the `BitbucketServerConfig` that added
	// connected repository. Format:
	// `projects/{project}/locations/{location}/bitbucketServerConfigs/{confi
	// g}`
	Parent string `json:"parent,omitempty"`

	// ForceSendFields is a list of field names (e.g.
	// "BitbucketServerConnectedRepository") to unconditionally include in
	// API requests. By default, fields with empty or default values are
	// omitted from API requests. However, any non-pointer, non-interface
	// field appearing in ForceSendFields will be sent to the server
	// regardless of whether the field is empty or not. This may be used to
	// include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g.
	// "BitbucketServerConnectedRepository") to include in API requests with
	// the JSON null value. By default, fields with empty values are omitted
	// from API requests. However, any field with an empty value appearing
	// in NullFields will be sent to the server as null. It is an error if a
	// field in this list has a non-empty value. This may be used to include
	// null fields in Patch requests.
	NullFields []string `json:"-"`
}

type CreateGitHubEnterpriseConfigOperationMetadata struct {
	// CompleteTime: Time the operation was completed.
	CompleteTime string `json:"completeTime,omitempty"`

	// CreateTime: Time the operation was created.
	CreateTime string `json:"createTime,omitempty"`

	// GithubEnterpriseConfig: The resource name of the GitHubEnterprise to
	// be created. Format:
	// `projects/{project}/locations/{location}/githubEnterpriseConfigs/{id}`
	// .
	GithubEnterpriseConfig string `json:"githubEnterpriseConfig,omitempty"`

	// ForceSendFields is a list of field names (e.g. "CompleteTime") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "CompleteTime") to include
	// in API requests with the JSON null value. By default, fields with
	// empty values are omitted from API requests. However, any field with
	// an empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type CreateGitLabConfigOperationMetadata struct {
	// CompleteTime: Time the operation was completed.
	CompleteTime string `json:"completeTime,omitempty"`

	// CreateTime: Time the operation was created.
	CreateTime string `json:"createTime,omitempty"`

	// GitlabConfig: The resource name of the GitLabConfig to be created.
	// Format: `projects/{project}/locations/{location}/gitlabConfigs/{id}`.
	GitlabConfig string `json:"gitlabConfig,omitempty"`

	// ForceSendFields is a list of field names (e.g. "CompleteTime") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "CompleteTime") to include
	// in API requests with the JSON null value. By default, fields with
	// empty values are omitted from API requests. However, any field with
	// an empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type CreateGitLabConnectedRepositoryRequest struct {
	// GitlabConnectedRepository: Required. The GitLab repository to
	// connect.
	GitlabConnectedRepository *GitLabConnectedRepository `json:"gitlabConnectedRepository,omitempty"`

	// Parent: Required. The name of the `GitLabConfig` that adds connected
	// repository. Format:
	// `projects/{project}/locations/{location}/gitLabConfigs/{config}`
	Parent string `json:"parent,omitempty"`

	// ForceSendFields is a list of field names (e.g.
	// "GitlabConnectedRepository") to unconditionally include in API
	// requests. By default, fields with empty or default values are omitted
	// from API requests. However, any non-pointer, non-interface field
	// appearing in ForceSendFields will be sent to the server regardless of
	// whether the field is empty or not. This may be used to include empty
	// fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g.
	// "GitlabConnectedRepository") to include in API requests with the JSON
	// null value. By default, fields with empty values are omitted from API
	// requests. However, any field with an empty value appearing in
	// NullFields will be sent to the server as null. It is an error if a
	// field in this list has a non-empty value. This may be used to include
	// null fields in Patch requests.
	NullFields []string `json:"-"`
}

type CreateWorkerPoolOperationMetadata struct {
	// CompleteTime: Time the operation was completed.
	CompleteTime string `json:"completeTime,omitempty"`

	// CreateTime: Time the operation was created.
	CreateTime string `json:"createTime,omitempty"`

	// WorkerPool: The resource name of the `WorkerPool` to create. Format:
	// `projects/{project}/locations/{location}/workerPools/{worker_pool}`.
	WorkerPool string `json:"workerPool,omitempty"`

	// ForceSendFields is a list of field names (e.g. "CompleteTime") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "CompleteTime") to include
	// in API requests with the JSON null value. By default, fields with
	// empty values are omitted from API requests. However, any field with
	// an empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type DefaultServiceAccount struct {
	// Name: Identifier. Format:
	// `projects/{project}/locations/{location}/defaultServiceAccount
	Name string `json:"name,omitempty"`

	// ServiceAccountEmail: Output only. The email address of the service
	// account identity that will be used for a build by default. This is
	// returned in the format
	// `projects/{project}/serviceAccounts/{service_account}` where
	// `{service_account}` could be the legacy Cloud Build SA, in the format
	// [PROJECT_NUMBER]@cloudbuild.gserviceaccount.com or the Compute SA, in
	// the format [PROJECT_NUMBER]-compute@developer.gserviceaccount.com. If
	// no service account will be used by default, this will be empty.
	ServiceAccountEmail string `json:"serviceAccountEmail,omitempty"`

	// ServerResponse contains the HTTP response code and headers from the
	// server.
	googleapi.ServerResponse `json:"-"`

	// ForceSendFields is a list of field names (e.g. "Name") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Name") to include in API
	// requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type DeleteBitbucketServerConfigOperationMetadata struct {
	// BitbucketServerConfig: The resource name of the BitbucketServerConfig
	// to be deleted. Format:
	// `projects/{project}/locations/{location}/bitbucketServerConfigs/{id}`.
	BitbucketServerConfig string `json:"bitbucketServerConfig,omitempty"`

	// CompleteTime: Time the operation was completed.
	CompleteTime string `json:"completeTime,omitempty"`

	// CreateTime: Time the operation was created.
	CreateTime string `json:"createTime,omitempty"`

	// ForceSendFields is a list of field names (e.g.
	// "BitbucketServerConfig") to unconditionally include in API requests.
	// By default, fields with empty or default values are omitted from API
	// requests. However, any non-pointer, non-interface field appearing in
	// ForceSendFields will be sent to the server regardless of whether the
	// field is empty or not. This may be used to include empty fields in
	// Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "BitbucketServerConfig") to
	// include in API requests with the JSON null value. By default, fields
	// with empty values are omitted from API requests. However, any field
	// with an empty value appearing in NullFields will be sent to the
	// server as null. It is an error if a field in this list has a
	// non-empty value. This may be used to include null fields in Patch
	// requests.
	NullFields []string `json:"-"`
}

type DeleteGitHubEnterpriseConfigOperationMetadata struct {
	// CompleteTime: Time the operation was completed.
	CompleteTime string `json:"completeTime,omitempty"`

	// CreateTime: Time the operation was created.
	CreateTime string `json:"createTime,omitempty"`

	// GithubEnterpriseConfig: The resource name of the GitHubEnterprise to
	// be deleted. Format:
	// `projects/{project}/locations/{location}/githubEnterpriseConfigs/{id}`
	// .
	GithubEnterpriseConfig string `json:"githubEnterpriseConfig,omitempty"`

	// ForceSendFields is a list of field names (e.g. "CompleteTime") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "CompleteTime") to include
	// in API requests with the JSON null value. By default, fields with
	// empty values are omitted from API requests. However, any field with
	// an empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type DeleteGitLabConfigOperationMetadata struct {
	// CompleteTime: Time the operation was completed.
	CompleteTime string `json:"completeTime,omitempty"`

	// CreateTime: Time the operation was created.
	CreateTime string `json:"createTime,omitempty"`

	// GitlabConfig: The resource name of the GitLabConfig to be created.
	// Format: `projects/{project}/locations/{location}/gitlabConfigs/{id}`.
	GitlabConfig string `json:"gitlabConfig,omitempty"`

	// ForceSendFields is a list of field names (e.g. "CompleteTime") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "CompleteTime") to include
	// in API requests with the JSON null value. By default, fields with
	// empty values are omitted from API requests. However, any field with
	// an empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type DeleteWorkerPoolOperationMetadata struct {
	// CompleteTime: Time the operation was completed.
	CompleteTime string `json:"completeTime,omitempty"`

	// CreateTime: Time the operation was created.
	CreateTime string `json:"createTime,omitempty"`

	// WorkerPool: The resource name of the `WorkerPool` being deleted.
	// Format:
	// `projects/{project}/locations/{location}/workerPools/{worker_pool}`.
	WorkerPool string `json:"workerPool,omitempty"`

	// ForceSendFields is a list of field names (e.g. "CompleteTime") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "CompleteTime") to include
	// in API requests with the JSON null value. By default, fields with
	// empty values are omitted from API requests. However, any field with
	// an empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type Empty struct {
	// ServerResponse contains the HTTP response code and headers from the
	// server.
	googleapi.ServerResponse `json:"-"`
}

type FailureInfo struct {
	// Detail: Explains the failure issue in more detail using hard-coded
	// text.
	Detail string `json:"detail,omitempty"`

	// Type: The name of the failure.
	//
	// Possible values:
	//   "FAILURE_TYPE_UNSPECIFIED" - Type unspecified
	//   "PUSH_FAILED" - Unable to push the image to the repository.
	//   "PUSH_IMAGE_NOT_FOUND" - Final image not found.
	//   "PUSH_NOT_AUTHORIZED" - Unauthorized push of the final image.
	//   "LOGGING_FAILURE" - Backend logging failures. Should retry.
	//   "USER_BUILD_STEP" - A build step has failed.
	//   "FETCH_SOURCE_FAILED" - The source fetching has failed.
	Type string `json:"type,omitempty"`

	// ForceSendFields is a list of field names (e.g. "Detail") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Detail") to include in API
	// requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type FileHashes struct {
	// FileHash: Collection of file hashes.
	FileHash []*Hash `json:"fileHash,omitempty"`

	// ForceSendFields is a list of field names (e.g. "FileHash") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "FileHash") to include in
	// API requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type GitFileSource struct {
	// BitbucketServerConfig: The full resource name of the bitbucket server
	// config. Format:
	// `projects/{project}/locations/{location}/bitbucketServerConfigs/{id}`.
	BitbucketServerConfig string `json:"bitbucketServerConfig,omitempty"`

	// GithubEnterpriseConfig: The full resource name of the github
	// enterprise config. Format:
	// `projects/{project}/locations/{location}/githubEnterpriseConfigs/{id}`
	// . `projects/{project}/githubEnterpriseConfigs/{id}`.
	GithubEnterpriseConfig string `json:"githubEnterpriseConfig,omitempty"`

	// Path: The path of the file, with the repo root as the root of the
	// path.
	Path string `json:"path,omitempty"`

	// RepoType: See RepoType above.
	//
	// Possible values:
	//   "UNKNOWN" - The default, unknown repo type. Don't use it, instead
	// use one of the other repo types.
	//   "CLOUD_SOURCE_REPOSITORIES" - A Google Cloud Source
	// Repositories-hosted repo.
	//   "GITHUB" - A GitHub-hosted repo not necessarily on "github.com"
	// (i.e. GitHub Enterprise).
	//   "BITBUCKET_SERVER" - A Bitbucket Server-hosted repo.
	//   "GITLAB" - A GitLab-hosted repo.
	//   "BITBUCKET_CLOUD" - A Bitbucket Cloud-hosted repo.
	RepoType string `json:"repoType,omitempty"`

	// Repository: The fully qualified resource name of the Repos API
	// repository. Either URI or repository can be specified. If
	// unspecified, the repo from which the trigger invocation originated is
	// assumed to be the repo from which to read the specified path.
	Repository string `json:"repository,omitempty"`

	// Revision: The branch, tag, arbitrary ref, or SHA version of the repo
	// to use when resolving the filename (optional). This field respects
	// the same syntax/resolution as described here:
	// https://git-scm.com/docs/gitrevisions If unspecified, the revision
	// from which the trigger invocation originated is assumed to be the
	// revision from which to read the specified path.
	Revision string `json:"revision,omitempty"`

	// Uri: The URI of the repo. Either uri or repository can be specified.
	// If unspecified, the repo from which the trigger invocation originated
	// is assumed to be the repo from which to read the specified path.
	Uri string `json:"uri,omitempty"`

	// ForceSendFields is a list of field names (e.g.
	// "BitbucketServerConfig") to unconditionally include in API requests.
	// By default, fields with empty or default values are omitted from API
	// requests. However, any non-pointer, non-interface field appearing in
	// ForceSendFields will be sent to the server regardless of whether the
	// field is empty or not. This may be used to include empty fields in
	// Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "BitbucketServerConfig") to
	// include in API requests with the JSON null value. By default, fields
	// with empty values are omitted from API requests. However, any field
	// with an empty value appearing in NullFields will be sent to the
	// server as null. It is an error if a field in this list has a
	// non-empty value. This may be used to include null fields in Patch
	// requests.
	NullFields []string `json:"-"`
}

type GitHubEnterpriseConfig struct {
	// AppId: Required. The GitHub app id of the Cloud Build app on the
	// GitHub Enterprise server.
	AppId int64 `json:"appId,omitempty,string"`

	// CreateTime: Output only. Time when the installation was associated
	// with the project.
	CreateTime string `json:"createTime,omitempty"`

	// DisplayName: Name to display for this config.
	DisplayName string `json:"displayName,omitempty"`

	// HostUrl: The URL of the github enterprise host the configuration is
	// for.
	HostUrl string `json:"hostUrl,omitempty"`

	// Name: Optional. The full resource name for the GitHubEnterpriseConfig
	// For example:
	// "projects/{$project_id}/locations/{$location_id}/githubEnterpriseConfi
	// gs/{$config_id}"
	Name string `json:"name,omitempty"`

	// PeeredNetwork: Optional. The network to be used when reaching out to
	// the GitHub Enterprise server. The VPC network must be enabled for
	// private service connection. This should be set if the GitHub
	// Enterprise server is hosted on-premises and not reachable by public
	// internet. If this field is left empty, no network peering will occur
	// and calls to the GitHub Enterprise server will be made over the
	// public internet. Must be in the format
	// `projects/{project}/global/networks/{network}`, where {project} is a
	// project number or id and {network} is the name of a VPC network in
	// the project.
	PeeredNetwork string `json:"peeredNetwork,omitempty"`

	// Secrets: Names of secrets in Secret Manager.
	Secrets *GitHubEnterpriseSecrets `json:"secrets,omitempty"`

	// SslCa: Optional. SSL certificate to use for requests to GitHub
	// Enterprise.
	SslCa string `json:"sslCa,omitempty"`

	// WebhookKey: The key that should be attached to webhook calls to the
	// ReceiveWebhook endpoint.
	WebhookKey string `json:"webhookKey,omitempty"`

	// ServerResponse contains the HTTP response code and headers from the
	// server.
	googleapi.ServerResponse `json:"-"`

	// ForceSendFields is a list of field names (e.g. "AppId") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "AppId") to include in API
	// requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type GitHubEnterpriseSecrets struct {
	// OauthClientIdName: The resource name for the OAuth client ID secret
	// in Secret Manager.
	OauthClientIdName string `json:"oauthClientIdName,omitempty"`

	// OauthClientIdVersionName: The resource name for the OAuth client ID
	// secret version in Secret Manager.
	OauthClientIdVersionName string `json:"oauthClientIdVersionName,omitempty"`

	// OauthSecretName: The resource name for the OAuth secret in Secret
	// Manager.
	OauthSecretName string `json:"oauthSecretName,omitempty"`

	// OauthSecretVersionName: The resource name for the OAuth secret secret
	// version in Secret Manager.
	OauthSecretVersionName string `json:"oauthSecretVersionName,omitempty"`

	// PrivateKeyName: The resource name for the private key secret.
	PrivateKeyName string `json:"privateKeyName,omitempty"`

	// PrivateKeyVersionName: The resource name for the private key secret
	// version.
	PrivateKeyVersionName string `json:"privateKeyVersionName,omitempty"`

	// WebhookSecretName: The resource name for the webhook secret in Secret
	// Manager.
	WebhookSecretName string `json:"webhookSecretName,omitempty"`

	// WebhookSecretVersionName: The resource name for the webhook secret
	// secret version in Secret Manager.
	WebhookSecretVersionName string `json:"webhookSecretVersionName,omitempty"`

	// ForceSendFields is a list of field names (e.g. "OauthClientIdName")
	// to unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "OauthClientIdName") to
	// include in API requests with the JSON null value. By default, fields
	// with empty values are omitted from API requests. However, any field
	// with an empty value appearing in NullFields will be sent to the
	// server as null. It is an error if a field in this list has a
	// non-empty value. This may be used to include null fields in Patch
	// requests.
	NullFields []string `json:"-"`
}

type GitHubEventsConfig struct {
	// EnterpriseConfigResourceName: Optional. The resource name of the
	// github enterprise config that should be applied to this installation.
	// For example:
	// "projects/{$project_id}/locations/{$location_id}/githubEnterpriseConfi
	// gs/{$config_id}"
	EnterpriseConfigResourceName string `json:"enterpriseConfigResourceName,omitempty"`

	// InstallationId: The installationID that emits the GitHub event.
	InstallationId int64 `json:"installationId,omitempty,string"`

	// Name: Name of the repository. For example: The name for
	// https://github.com/googlecloudplatform/cloud-builders is
	// "cloud-builders".
	Name string `json:"name,omitempty"`

	// Owner: Owner of the repository. For example: The owner for
	// https://github.com/googlecloudplatform/cloud-builders is
	// "googlecloudplatform".
	Owner string `json:"owner,omitempty"`

	// PullRequest: filter to match changes in pull requests.
	PullRequest *PullRequestFilter `json:"pullRequest,omitempty"`

	// Push: filter to match changes in refs like branches, tags.
	Push *PushFilter `json:"push,omitempty"`

	// ForceSendFields is a list of field names (e.g.
	// "EnterpriseConfigResourceName") to unconditionally include in API
	// requests. By default, fields with empty or default values are omitted
	// from API requests. However, any non-pointer, non-interface field
	// appearing in ForceSendFields will be sent to the server regardless of
	// whether the field is empty or not. This may be used to include empty
	// fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g.
	// "EnterpriseConfigResourceName") to include in API requests with the
	// JSON null value. By default, fields with empty values are omitted
	// from API requests. However, any field with an empty value appearing
	// in NullFields will be sent to the server as null. It is an error if a
	// field in this list has a non-empty value. This may be used to include
	// null fields in Patch requests.
	NullFields []string `json:"-"`
}

type GitLabConfig struct {
	// ConnectedRepositories: Connected GitLab.com or GitLabEnterprise
	// repositories for this config.
	ConnectedRepositories []*GitLabRepositoryId `json:"connectedRepositories,omitempty"`

	// CreateTime: Output only. Time when the config was created.
	CreateTime string `json:"createTime,omitempty"`

	// EnterpriseConfig: Optional. GitLabEnterprise config.
	EnterpriseConfig *GitLabEnterpriseConfig `json:"enterpriseConfig,omitempty"`

	// Name: The resource name for the config.
	Name string `json:"name,omitempty"`

	// Secrets: Required. Secret Manager secrets needed by the config.
	Secrets *GitLabSecrets `json:"secrets,omitempty"`

	// Username: Username of the GitLab.com or GitLab Enterprise account
	// Cloud Build will use.
	Username string `json:"username,omitempty"`

	// WebhookKey: Output only. UUID included in webhook requests. The UUID
	// is used to look up the corresponding config.
	WebhookKey string `json:"webhookKey,omitempty"`

	// ServerResponse contains the HTTP response code and headers from the
	// server.
	googleapi.ServerResponse `json:"-"`

	// ForceSendFields is a list of field names (e.g.
	// "ConnectedRepositories") to unconditionally include in API requests.
	// By default, fields with empty or default values are omitted from API
	// requests. However, any non-pointer, non-interface field appearing in
	// ForceSendFields will be sent to the server regardless of whether the
	// field is empty or not. This may be used to include empty fields in
	// Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "ConnectedRepositories") to
	// include in API requests with the JSON null value. By default, fields
	// with empty values are omitted from API requests. However, any field
	// with an empty value appearing in NullFields will be sent to the
	// server as null. It is an error if a field in this list has a
	// non-empty value. This may be used to include null fields in Patch
	// requests.
	NullFields []string `json:"-"`
}

type GitLabConnectedRepository struct {
	// Parent: The name of the `GitLabConfig` that added connected
	// repository. Format:
	// `projects/{project}/locations/{location}/gitLabConfigs/{config}`
	Parent string `json:"parent,omitempty"`

	// Repo: The GitLab repositories to connect.
	Repo *GitLabRepositoryId `json:"repo,omitempty"`

	// Status: Output only. The status of the repo connection request.
	Status *Status `json:"status,omitempty"`

	// ForceSendFields is a list of field names (e.g. "Parent") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Parent") to include in API
	// requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type GitLabEnterpriseConfig struct {
	// HostUri: Immutable. The URI of the GitlabEnterprise host.
	HostUri string `json:"hostUri,omitempty"`

	// ServiceDirectoryConfig: The Service Directory configuration to be
	// used when reaching out to the GitLab Enterprise instance.
	ServiceDirectoryConfig *ServiceDirectoryConfig `json:"serviceDirectoryConfig,omitempty"`

	// SslCa: The SSL certificate to use in requests to GitLab Enterprise
	// instances.
	SslCa string `json:"sslCa,omitempty"`

	// ForceSendFields is a list of field names (e.g. "HostUri") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "HostUri") to include in
	// API requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type GitLabEventsConfig struct {
	// GitlabConfig: Output only. The GitLabConfig specified in the
	// gitlab_config_resource field.
	GitlabConfig *GitLabConfig `json:"gitlabConfig,omitempty"`

	// GitlabConfigResource: The GitLab config resource that this trigger
	// config maps to.
	GitlabConfigResource string `json:"gitlabConfigResource,omitempty"`

	// ProjectNamespace: Namespace of the GitLab project.
	ProjectNamespace string `json:"projectNamespace,omitempty"`

	// PullRequest: Filter to match changes in pull requests.
	PullRequest *PullRequestFilter `json:"pullRequest,omitempty"`

	// Push: Filter to match changes in refs like branches, tags.
	Push *PushFilter `json:"push,omitempty"`

	// ForceSendFields is a list of field names (e.g. "GitlabConfig") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "GitlabConfig") to include
	// in API requests with the JSON null value. By default, fields with
	// empty values are omitted from API requests. However, any field with
	// an empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type GitLabRepository struct {
	// BrowseUri: Link to the browse repo page on the GitLab instance
	BrowseUri string `json:"browseUri,omitempty"`

	// Description: Description of the repository
	Description string `json:"description,omitempty"`

	// DisplayName: Display name of the repository
	DisplayName string `json:"displayName,omitempty"`

	// Name: The resource name of the repository
	Name string `json:"name,omitempty"`

	// RepositoryId: Identifier for a repository
	RepositoryId *GitLabRepositoryId `json:"repositoryId,omitempty"`

	// ForceSendFields is a list of field names (e.g. "BrowseUri") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "BrowseUri") to include in
	// API requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type GitLabRepositoryId struct {
	// Id: Required. Identifier for the repository. example:
	// "namespace/project-slug", namespace is usually the username or group
	// ID
	Id string `json:"id,omitempty"`

	// WebhookId: Output only. The ID of the webhook that was created for
	// receiving events from this repo. We only create and manage a single
	// webhook for each repo.
	WebhookId int64 `json:"webhookId,omitempty"`

	// ForceSendFields is a list of field names (e.g. "Id") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Id") to include in API
	// requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type GitLabSecrets struct {
	// ApiAccessTokenVersion: Required. The resource name for the api access
	// token’s secret version
	ApiAccessTokenVersion string `json:"apiAccessTokenVersion,omitempty"`

	// ApiKeyVersion: Required. Immutable. API Key that will be attached to
	// webhook requests from GitLab to Cloud Build.
	ApiKeyVersion string `json:"apiKeyVersion,omitempty"`

	// ReadAccessTokenVersion: Required. The resource name for the read
	// access token’s secret version
	ReadAccessTokenVersion string `json:"readAccessTokenVersion,omitempty"`

	// WebhookSecretVersion: Required. Immutable. The resource name for the
	// webhook secret’s secret version. Once this field has been set, it
	// cannot be changed. If you need to change it, please create another
	// GitLabConfig.
	WebhookSecretVersion string `json:"webhookSecretVersion,omitempty"`

	// ForceSendFields is a list of field names (e.g.
	// "ApiAccessTokenVersion") to unconditionally include in API requests.
	// By default, fields with empty or default values are omitted from API
	// requests. However, any non-pointer, non-interface field appearing in
	// ForceSendFields will be sent to the server regardless of whether the
	// field is empty or not. This may be used to include empty fields in
	// Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "ApiAccessTokenVersion") to
	// include in API requests with the JSON null value. By default, fields
	// with empty values are omitted from API requests. However, any field
	// with an empty value appearing in NullFields will be sent to the
	// server as null. It is an error if a field in this list has a
	// non-empty value. This may be used to include null fields in Patch
	// requests.
	NullFields []string `json:"-"`
}

type GitRepoSource struct {
	// BitbucketServerConfig: The full resource name of the bitbucket server
	// config. Format:
	// `projects/{project}/locations/{location}/bitbucketServerConfigs/{id}`.
	BitbucketServerConfig string `json:"bitbucketServerConfig,omitempty"`

	// GithubEnterpriseConfig: The full resource name of the github
	// enterprise config. Format:
	// `projects/{project}/locations/{location}/githubEnterpriseConfigs/{id}`
	// . `projects/{project}/githubEnterpriseConfigs/{id}`.
	GithubEnterpriseConfig string `json:"githubEnterpriseConfig,omitempty"`

	// Ref: The branch or tag to use. Must start with "refs/" (required).
	Ref string `json:"ref,omitempty"`

	// RepoType: See RepoType below.
	//
	// Possible values:
	//   "UNKNOWN" - The default, unknown repo type. Don't use it, instead
	// use one of the other repo types.
	//   "CLOUD_SOURCE_REPOSITORIES" - A Google Cloud Source
	// Repositories-hosted repo.
	//   "GITHUB" - A GitHub-hosted repo not necessarily on "github.com"
	// (i.e. GitHub Enterprise).
	//   "BITBUCKET_SERVER" - A Bitbucket Server-hosted repo.
	//   "GITLAB" - A GitLab-hosted repo.
	//   "BITBUCKET_CLOUD" - A Bitbucket Cloud-hosted repo.
	RepoType string `json:"repoType,omitempty"`

	// Repository: The connected repository resource name, in the format
	// `projects/*/locations/*/connections/*/repositories/*`. Either `uri`
	// or `repository` can be specified and is required.
	Repository string `json:"repository,omitempty"`

	// Uri: The URI of the repo (e.g. https://github.com/user/repo.git).
	// Either `uri` or `repository` can be specified and is required.
	Uri string `json:"uri,omitempty"`

	// ForceSendFields is a list of field names (e.g.
	// "BitbucketServerConfig") to unconditionally include in API requests.
	// By default, fields with empty or default values are omitted from API
	// requests. However, any non-pointer, non-interface field appearing in
	// ForceSendFields will be sent to the server regardless of whether the
	// field is empty or not. This may be used to include empty fields in
	// Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "BitbucketServerConfig") to
	// include in API requests with the JSON null value. By default, fields
	// with empty values are omitted from API requests. However, any field
	// with an empty value appearing in NullFields will be sent to the
	// server as null. It is an error if a field in this list has a
	// non-empty value. This may be used to include null fields in Patch
	// requests.
	NullFields []string `json:"-"`
}

type GitSource struct {
	// Dir: Directory, relative to the source root, in which to run the
	// build. This must be a relative path. If a step's `dir` is specified
	// and is an absolute path, this value is ignored for that step's
	// execution.
	Dir string `json:"dir,omitempty"`

	// Revision: The revision to fetch from the Git repository such as a
	// branch, a tag, a commit SHA, or any Git ref. Cloud Build uses `git
	// fetch` to fetch the revision from the Git repository; therefore make
	// sure that the string you provide for `revision` is parsable by the
	// command. For information on string values accepted by `git fetch`,
	// see https://git-scm.com/docs/gitrevisions#_specifying_revisions. For
	// information on `git fetch`, see https://git-scm.com/docs/git-fetch.
	Revision string `json:"revision,omitempty"`

	// Url: Location of the Git repo to build. This will be used as a `git
	// remote`, see https://git-scm.com/docs/git-remote.
	Url string `json:"url,omitempty"`

	// ForceSendFields is a list of field names (e.g. "Dir") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Dir") to include in API
	// requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type GithubDotComWebhookReceiveCall struct {
	// contains filtered or unexported fields
}

type GithubDotComWebhookService struct {
	// contains filtered or unexported fields
}

type Hash struct {
	// Type: The type of hash that was performed.
	//
	// Possible values:
	//   "NONE" - No hash requested.
	//   "SHA256" - Use a sha256 hash.
	//   "MD5" - Use a md5 hash.
	//   "SHA512" - Use a sha512 hash.
	Type string `json:"type,omitempty"`

	// Value: The hash value.
	Value string `json:"value,omitempty"`

	// ForceSendFields is a list of field names (e.g. "Type") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Type") to include in API
	// requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type HttpBody struct {
	// ContentType: The HTTP Content-Type header value specifying the
	// content type of the body.
	ContentType string `json:"contentType,omitempty"`

	// Data: The HTTP request/response body as raw binary.
	Data string `json:"data,omitempty"`

	// Extensions: Application specific response metadata. Must be set in
	// the first response for streaming APIs.
	Extensions []googleapi.RawMessage `json:"extensions,omitempty"`

	// ForceSendFields is a list of field names (e.g. "ContentType") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "ContentType") to include
	// in API requests with the JSON null value. By default, fields with
	// empty values are omitted from API requests. However, any field with
	// an empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type InlineSecret struct {
	// EnvMap: Map of environment variable name to its encrypted value.
	// Secret environment variables must be unique across all of a build's
	// secrets, and must be used by at least one build step. Values can be
	// at most 64 KB in size. There can be at most 100 secret values across
	// all of a build's secrets.
	EnvMap map[string]string `json:"envMap,omitempty"`

	// KmsKeyName: Resource name of Cloud KMS crypto key to decrypt the
	// encrypted value. In format:
	// projects/*/locations/*/keyRings/*/cryptoKeys/*
	KmsKeyName string `json:"kmsKeyName,omitempty"`

	// ForceSendFields is a list of field names (e.g. "EnvMap") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "EnvMap") to include in API
	// requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type ListBitbucketServerConfigsResponse struct {
	// BitbucketServerConfigs: A list of BitbucketServerConfigs
	BitbucketServerConfigs []*BitbucketServerConfig `json:"bitbucketServerConfigs,omitempty"`

	// NextPageToken: A token that can be sent as `page_token` to retrieve
	// the next page. If this field is omitted, there are no subsequent
	// pages.
	NextPageToken string `json:"nextPageToken,omitempty"`

	// ServerResponse contains the HTTP response code and headers from the
	// server.
	googleapi.ServerResponse `json:"-"`

	// ForceSendFields is a list of field names (e.g.
	// "BitbucketServerConfigs") to unconditionally include in API requests.
	// By default, fields with empty or default values are omitted from API
	// requests. However, any non-pointer, non-interface field appearing in
	// ForceSendFields will be sent to the server regardless of whether the
	// field is empty or not. This may be used to include empty fields in
	// Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "BitbucketServerConfigs")
	// to include in API requests with the JSON null value. By default,
	// fields with empty values are omitted from API requests. However, any
	// field with an empty value appearing in NullFields will be sent to the
	// server as null. It is an error if a field in this list has a
	// non-empty value. This may be used to include null fields in Patch
	// requests.
	NullFields []string `json:"-"`
}

type ListBitbucketServerRepositoriesResponse struct {
	// BitbucketServerRepositories: List of Bitbucket Server repositories.
	BitbucketServerRepositories []*BitbucketServerRepository `json:"bitbucketServerRepositories,omitempty"`

	// NextPageToken: A token that can be sent as `page_token` to retrieve
	// the next page. If this field is omitted, there are no subsequent
	// pages.
	NextPageToken string `json:"nextPageToken,omitempty"`

	// ServerResponse contains the HTTP response code and headers from the
	// server.
	googleapi.ServerResponse `json:"-"`

	// ForceSendFields is a list of field names (e.g.
	// "BitbucketServerRepositories") to unconditionally include in API
	// requests. By default, fields with empty or default values are omitted
	// from API requests. However, any non-pointer, non-interface field
	// appearing in ForceSendFields will be sent to the server regardless of
	// whether the field is empty or not. This may be used to include empty
	// fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g.
	// "BitbucketServerRepositories") to include in API requests with the
	// JSON null value. By default, fields with empty values are omitted
	// from API requests. However, any field with an empty value appearing
	// in NullFields will be sent to the server as null. It is an error if a
	// field in this list has a non-empty value. This may be used to include
	// null fields in Patch requests.
	NullFields []string `json:"-"`
}

type ListBuildTriggersResponse struct {
	// NextPageToken: Token to receive the next page of results.
	NextPageToken string `json:"nextPageToken,omitempty"`

	// Triggers: `BuildTriggers` for the project, sorted by `create_time`
	// descending.
	Triggers []*BuildTrigger `json:"triggers,omitempty"`

	// ServerResponse contains the HTTP response code and headers from the
	// server.
	googleapi.ServerResponse `json:"-"`

	// ForceSendFields is a list of field names (e.g. "NextPageToken") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "NextPageToken") to include
	// in API requests with the JSON null value. By default, fields with
	// empty values are omitted from API requests. However, any field with
	// an empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type ListBuildsResponse struct {
	// Builds: Builds will be sorted by `create_time`, descending.
	Builds []*Build `json:"builds,omitempty"`

	// NextPageToken: Token to receive the next page of results. This will
	// be absent if the end of the response list has been reached.
	NextPageToken string `json:"nextPageToken,omitempty"`

	// ServerResponse contains the HTTP response code and headers from the
	// server.
	googleapi.ServerResponse `json:"-"`

	// ForceSendFields is a list of field names (e.g. "Builds") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Builds") to include in API
	// requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type ListGitLabConfigsResponse struct {
	// GitlabConfigs: A list of GitLabConfigs
	GitlabConfigs []*GitLabConfig `json:"gitlabConfigs,omitempty"`

	// NextPageToken: A token that can be sent as `page_token` to retrieve
	// the next page If this field is omitted, there are no subsequent
	// pages.
	NextPageToken string `json:"nextPageToken,omitempty"`

	// ServerResponse contains the HTTP response code and headers from the
	// server.
	googleapi.ServerResponse `json:"-"`

	// ForceSendFields is a list of field names (e.g. "GitlabConfigs") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "GitlabConfigs") to include
	// in API requests with the JSON null value. By default, fields with
	// empty values are omitted from API requests. However, any field with
	// an empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type ListGitLabRepositoriesResponse struct {
	// GitlabRepositories: List of GitLab repositories
	GitlabRepositories []*GitLabRepository `json:"gitlabRepositories,omitempty"`

	// NextPageToken: A token that can be sent as `page_token` to retrieve
	// the next page. If this field is omitted, there are no subsequent
	// pages.
	NextPageToken string `json:"nextPageToken,omitempty"`

	// ServerResponse contains the HTTP response code and headers from the
	// server.
	googleapi.ServerResponse `json:"-"`

	// ForceSendFields is a list of field names (e.g. "GitlabRepositories")
	// to unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "GitlabRepositories") to
	// include in API requests with the JSON null value. By default, fields
	// with empty values are omitted from API requests. However, any field
	// with an empty value appearing in NullFields will be sent to the
	// server as null. It is an error if a field in this list has a
	// non-empty value. This may be used to include null fields in Patch
	// requests.
	NullFields []string `json:"-"`
}

type ListGithubEnterpriseConfigsResponse struct {
	// Configs: A list of GitHubEnterpriseConfigs
	Configs []*GitHubEnterpriseConfig `json:"configs,omitempty"`

	// ServerResponse contains the HTTP response code and headers from the
	// server.
	googleapi.ServerResponse `json:"-"`

	// ForceSendFields is a list of field names (e.g. "Configs") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Configs") to include in
	// API requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type ListWorkerPoolsResponse struct {
	// NextPageToken: Continuation token used to page through large result
	// sets. Provide this value in a subsequent ListWorkerPoolsRequest to
	// return the next page of results.
	NextPageToken string `json:"nextPageToken,omitempty"`

	// WorkerPools: `WorkerPools` for the specified project.
	WorkerPools []*WorkerPool `json:"workerPools,omitempty"`

	// ServerResponse contains the HTTP response code and headers from the
	// server.
	googleapi.ServerResponse `json:"-"`

	// ForceSendFields is a list of field names (e.g. "NextPageToken") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "NextPageToken") to include
	// in API requests with the JSON null value. By default, fields with
	// empty values are omitted from API requests. However, any field with
	// an empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type LocationsRegionalWebhookCall struct {
	// contains filtered or unexported fields
}

type LocationsService struct {
	// contains filtered or unexported fields
}

type MavenArtifact struct {
	// ArtifactId: Maven `artifactId` value used when uploading the artifact
	// to Artifact Registry.
	ArtifactId string `json:"artifactId,omitempty"`

	// GroupId: Maven `groupId` value used when uploading the artifact to
	// Artifact Registry.
	GroupId string `json:"groupId,omitempty"`

	// Path: Path to an artifact in the build's workspace to be uploaded to
	// Artifact Registry. This can be either an absolute path, e.g.
	// /workspace/my-app/target/my-app-1.0.SNAPSHOT.jar or a relative path
	// from /workspace, e.g. my-app/target/my-app-1.0.SNAPSHOT.jar.
	Path string `json:"path,omitempty"`

	// Repository: Artifact Registry repository, in the form
	// "https://$REGION-maven.pkg.dev/$PROJECT/$REPOSITORY" Artifact in the
	// workspace specified by path will be uploaded to Artifact Registry
	// with this location as a prefix.
	Repository string `json:"repository,omitempty"`

	// Version: Maven `version` value used when uploading the artifact to
	// Artifact Registry.
	Version string `json:"version,omitempty"`

	// ForceSendFields is a list of field names (e.g. "ArtifactId") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "ArtifactId") to include in
	// API requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type NetworkConfig struct {
	// EgressOption: Option to configure network egress for the workers.
	//
	// Possible values:
	//   "EGRESS_OPTION_UNSPECIFIED" - If set, defaults to PUBLIC_EGRESS.
	//   "NO_PUBLIC_EGRESS" - If set, workers are created without any public
	// address, which prevents network egress to public IPs unless a network
	// proxy is configured.
	//   "PUBLIC_EGRESS" - If set, workers are created with a public address
	// which allows for public internet egress.
	EgressOption string `json:"egressOption,omitempty"`

	// PeeredNetwork: Required. Immutable. The network definition that the
	// workers are peered to. If this section is left empty, the workers
	// will be peered to `WorkerPool.project_id` on the service producer
	// network. Must be in the format
	// `projects/{project}/global/networks/{network}`, where `{project}` is
	// a project number, such as `12345`, and `{network}` is the name of a
	// VPC network in the project. See Understanding network configuration
	// options
	// (https://cloud.google.com/build/docs/private-pools/set-up-private-pool-environment)
	PeeredNetwork string `json:"peeredNetwork,omitempty"`

	// PeeredNetworkIpRange: Immutable. Subnet IP range within the peered
	// network. This is specified in CIDR notation with a slash and the
	// subnet prefix size. You can optionally specify an IP address before
	// the subnet prefix value. e.g. `192.168.0.0/29` would specify an IP
	// range starting at 192.168.0.0 with a prefix size of 29 bits. `/16`
	// would specify a prefix size of 16 bits, with an automatically
	// determined IP within the peered VPC. If unspecified, a value of `/24`
	// will be used.
	PeeredNetworkIpRange string `json:"peeredNetworkIpRange,omitempty"`

	// ForceSendFields is a list of field names (e.g. "EgressOption") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "EgressOption") to include
	// in API requests with the JSON null value. By default, fields with
	// empty values are omitted from API requests. However, any field with
	// an empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type NpmPackage struct {
	// PackagePath: Path to the package.json. e.g. workspace/path/to/package
	PackagePath string `json:"packagePath,omitempty"`

	// Repository: Artifact Registry repository, in the form
	// "https://$REGION-npm.pkg.dev/$PROJECT/$REPOSITORY" Npm package in the
	// workspace specified by path will be zipped and uploaded to Artifact
	// Registry with this location as a prefix.
	Repository string `json:"repository,omitempty"`

	// ForceSendFields is a list of field names (e.g. "PackagePath") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "PackagePath") to include
	// in API requests with the JSON null value. By default, fields with
	// empty values are omitted from API requests. However, any field with
	// an empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type Operation struct {
	// Done: If the value is `false`, it means the operation is still in
	// progress. If `true`, the operation is completed, and either `error`
	// or `response` is available.
	Done bool `json:"done,omitempty"`

	// Error: The error result of the operation in case of failure or
	// cancellation.
	Error *Status `json:"error,omitempty"`

	// Metadata: Service-specific metadata associated with the operation. It
	// typically contains progress information and common metadata such as
	// create time. Some services might not provide such metadata. Any
	// method that returns a long-running operation should document the
	// metadata type, if any.
	Metadata googleapi.RawMessage `json:"metadata,omitempty"`

	// Name: The server-assigned name, which is only unique within the same
	// service that originally returns it. If you use the default HTTP
	// mapping, the `name` should be a resource name ending with
	// `operations/{unique_id}`.
	Name string `json:"name,omitempty"`

	// Response: The normal, successful response of the operation. If the
	// original method returns no data on success, such as `Delete`, the
	// response is `google.protobuf.Empty`. If the original method is
	// standard `Get`/`Create`/`Update`, the response should be the
	// resource. For other methods, the response should have the type
	// `XxxResponse`, where `Xxx` is the original method name. For example,
	// if the original method name is `TakeSnapshot()`, the inferred
	// response type is `TakeSnapshotResponse`.
	Response googleapi.RawMessage `json:"response,omitempty"`

	// ServerResponse contains the HTTP response code and headers from the
	// server.
	googleapi.ServerResponse `json:"-"`

	// ForceSendFields is a list of field names (e.g. "Done") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Done") to include in API
	// requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type OperationMetadata struct {
	// ApiVersion: Output only. API version used to start the operation.
	ApiVersion string `json:"apiVersion,omitempty"`

	// CancelRequested: Output only. Identifies whether the user has
	// requested cancellation of the operation. Operations that have been
	// cancelled successfully have Operation.error value with a
	// google.rpc.Status.code of 1, corresponding to `Code.CANCELLED`.
	CancelRequested bool `json:"cancelRequested,omitempty"`

	// CreateTime: Output only. The time the operation was created.
	CreateTime string `json:"createTime,omitempty"`

	// EndTime: Output only. The time the operation finished running.
	EndTime string `json:"endTime,omitempty"`

	// StatusDetail: Output only. Human-readable status of the operation, if
	// any.
	StatusDetail string `json:"statusDetail,omitempty"`

	// Target: Output only. Server-defined resource path for the target of
	// the operation.
	Target string `json:"target,omitempty"`

	// Verb: Output only. Name of the verb executed by the operation.
	Verb string `json:"verb,omitempty"`

	// ForceSendFields is a list of field names (e.g. "ApiVersion") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "ApiVersion") to include in
	// API requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type OperationsCancelCall struct {
	// contains filtered or unexported fields
}

type OperationsGetCall struct {
	// contains filtered or unexported fields
}

type OperationsService struct {
	// contains filtered or unexported fields
}

type PoolOption struct {
	// Name: The `WorkerPool` resource to execute the build on. You must
	// have `cloudbuild.workerpools.use` on the project hosting the
	// WorkerPool. Format
	// projects/{project}/locations/{location}/workerPools/{workerPoolId}
	Name string `json:"name,omitempty"`

	// ForceSendFields is a list of field names (e.g. "Name") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "Name") to include in API
	// requests with the JSON null value. By default, fields with empty
	// values are omitted from API requests. However, any field with an
	// empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type PrivatePoolV1Config struct {
	// NetworkConfig: Network configuration for the pool.
	NetworkConfig *NetworkConfig `json:"networkConfig,omitempty"`

	// WorkerConfig: Machine configuration for the workers in the pool.
	WorkerConfig *WorkerConfig `json:"workerConfig,omitempty"`

	// ForceSendFields is a list of field names (e.g. "NetworkConfig") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "NetworkConfig") to include
	// in API requests with the JSON null value. By default, fields with
	// empty values are omitted from API requests. However, any field with
	// an empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type ProcessAppManifestCallbackOperationMetadata struct {
	// CompleteTime: Time the operation was completed.
	CompleteTime string `json:"completeTime,omitempty"`

	// CreateTime: Time the operation was created.
	CreateTime string `json:"createTime,omitempty"`

	// GithubEnterpriseConfig: The resource name of the GitHubEnterprise to
	// be created. Format:
	// `projects/{project}/locations/{location}/githubEnterpriseConfigs/{id}`
	// .
	GithubEnterpriseConfig string `json:"githubEnterpriseConfig,omitempty"`

	// ForceSendFields is a list of field names (e.g. "CompleteTime") to
	// unconditionally include in API requests. By default, fields with
	// empty or default values are omitted from API requests. However, any
	// non-pointer, non-interface field appearing in ForceSendFields will be
	// sent to the server regardless of whether the field is empty or not.
	// This may be used to include empty fields in Patch requests.
	ForceSendFields []string `json:"-"`

	// NullFields is a list of field names (e.g. "CompleteTime") to include
	// in API requests with the JSON null value. By default, fields with
	// empty values are omitted from API requests. However, any field with
	// an empty value appearing in NullFields will be sent to the server as
	// null. It is an error if a field in this list has a non-empty value.
	// This may be used to include null fields in Patch requests.
	NullFields []string `json:"-"`
}

type ProjectsBuildsApproveCall struct {
	// contains filtered or unexported fields
}

type ProjectsBuildsCancelCall struct {
	// contains filtered or unexported fields
}

type ProjectsBuildsCreateCall struct {
	// contains filtered or unexported fields
}

type ProjectsBuildsGetCall struct {
	// contains filtered or unexported fields
}

type ProjectsBuildsListCall struct {
	// contains filtered or unexported fields
}

type ProjectsBuildsRetryCall struct {
	// contains filtered or unexported fields
}

type ProjectsBuildsService struct {
	// contains filtered or unexported fields
}

type ProjectsGithubEnterpriseConfigsCreateCall struct {
	// contains filtered or unexported fields
}

type ProjectsGithubEnterpriseConfigsDeleteCall struct {
	// contains filtered or unexported fields
}

type ProjectsGithubEnterpriseConfigsGetCall struct {
	// contains filtered or unexported fields
}

type ProjectsGithubEnterpriseConfigsListCall struct {
	// contains filtered or unexported fields
}