code

const (
	// Not an error; returned on success.
	//
	// HTTP Mapping: 200 OK
	Code_OK Code = 0
	// The operation was cancelled, typically by the caller.
	//
	// HTTP Mapping: 499 Client Closed Request
	Code_CANCELLED Code = 1
	// Unknown error.  For example, this error may be returned when
	// a `Status` value received from another address space belongs to
	// an error space that is not known in this address space.  Also
	// errors raised by APIs that do not return enough error information
	// may be converted to this error.
	//
	// HTTP Mapping: 500 Internal Server Error
	Code_UNKNOWN Code = 2
	// The client specified an invalid argument.  Note that this differs
	// from `FAILED_PRECONDITION`.  `INVALID_ARGUMENT` indicates arguments
	// that are problematic regardless of the state of the system
	// (e.g., a malformed file name).
	//
	// HTTP Mapping: 400 Bad Request
	Code_INVALID_ARGUMENT Code = 3
	// The deadline expired before the operation could complete. For operations
	// that change the state of the system, this error may be returned
	// even if the operation has completed successfully.  For example, a
	// successful response from a server could have been delayed long
	// enough for the deadline to expire.
	//
	// HTTP Mapping: 504 Gateway Timeout
	Code_DEADLINE_EXCEEDED Code = 4
	// Some requested entity (e.g., file or directory) was not found.
	//
	// Note to server developers: if a request is denied for an entire class
	// of users, such as gradual feature rollout or undocumented allowlist,
	// `NOT_FOUND` may be used. If a request is denied for some users within
	// a class of users, such as user-based access control, `PERMISSION_DENIED`
	// must be used.
	//
	// HTTP Mapping: 404 Not Found
	Code_NOT_FOUND Code = 5
	// The entity that a client attempted to create (e.g., file or directory)
	// already exists.
	//
	// HTTP Mapping: 409 Conflict
	Code_ALREADY_EXISTS Code = 6
	// The caller does not have permission to execute the specified
	// operation. `PERMISSION_DENIED` must not be used for rejections
	// caused by exhausting some resource (use `RESOURCE_EXHAUSTED`
	// instead for those errors). `PERMISSION_DENIED` must not be
	// used if the caller can not be identified (use `UNAUTHENTICATED`
	// instead for those errors). This error code does not imply the
	// request is valid or the requested entity exists or satisfies
	// other pre-conditions.
	//
	// HTTP Mapping: 403 Forbidden
	Code_PERMISSION_DENIED Code = 7
	// The request does not have valid authentication credentials for the
	// operation.
	//
	// HTTP Mapping: 401 Unauthorized
	Code_UNAUTHENTICATED Code = 16
	// Some resource has been exhausted, perhaps a per-user quota, or
	// perhaps the entire file system is out of space.
	//
	// HTTP Mapping: 429 Too Many Requests
	Code_RESOURCE_EXHAUSTED Code = 8
	// The operation was rejected because the system is not in a state
	// required for the operation's execution.  For example, the directory
	// to be deleted is non-empty, an rmdir operation is applied to
	// a non-directory, etc.
	//
	// Service implementors can use the following guidelines to decide
	// between `FAILED_PRECONDITION`, `ABORTED`, and `UNAVAILABLE`:
	//
	//	(a) Use `UNAVAILABLE` if the client can retry just the failing call.
	//	(b) Use `ABORTED` if the client should retry at a higher level. For
	//	    example, when a client-specified test-and-set fails, indicating the
	//	    client should restart a read-modify-write sequence.
	//	(c) Use `FAILED_PRECONDITION` if the client should not retry until
	//	    the system state has been explicitly fixed. For example, if an "rmdir"
	//	    fails because the directory is non-empty, `FAILED_PRECONDITION`
	//	    should be returned since the client should not retry unless
	//	    the files are deleted from the directory.
	//
	// HTTP Mapping: 400 Bad Request
	Code_FAILED_PRECONDITION Code = 9
	// The operation was aborted, typically due to a concurrency issue such as
	// a sequencer check failure or transaction abort.
	//
	// See the guidelines above for deciding between `FAILED_PRECONDITION`,
	// `ABORTED`, and `UNAVAILABLE`.
	//
	// HTTP Mapping: 409 Conflict
	Code_ABORTED Code = 10
	// The operation was attempted past the valid range.  E.g., seeking or
	// reading past end-of-file.
	//
	// Unlike `INVALID_ARGUMENT`, this error indicates a problem that may
	// be fixed if the system state changes. For example, a 32-bit file
	// system will generate `INVALID_ARGUMENT` if asked to read at an
	// offset that is not in the range [0,2^32-1], but it will generate
	// `OUT_OF_RANGE` if asked to read from an offset past the current
	// file size.
	//
	// There is a fair bit of overlap between `FAILED_PRECONDITION` and
	// `OUT_OF_RANGE`.  We recommend using `OUT_OF_RANGE` (the more specific
	// error) when it applies so that callers who are iterating through
	// a space can easily look for an `OUT_OF_RANGE` error to detect when
	// they are done.
	//
	// HTTP Mapping: 400 Bad Request
	Code_OUT_OF_RANGE Code = 11
	// The operation is not implemented or is not supported/enabled in this
	// service.
	//
	// HTTP Mapping: 501 Not Implemented
	Code_UNIMPLEMENTED Code = 12
	// Internal errors.  This means that some invariants expected by the
	// underlying system have been broken.  This error code is reserved
	// for serious errors.
	//
	// HTTP Mapping: 500 Internal Server Error
	Code_INTERNAL Code = 13
	// The service is currently unavailable.  This is most likely a
	// transient condition, which can be corrected by retrying with
	// a backoff. Note that it is not always safe to retry
	// non-idempotent operations.
	//
	// See the guidelines above for deciding between `FAILED_PRECONDITION`,
	// `ABORTED`, and `UNAVAILABLE`.
	//
	// HTTP Mapping: 503 Service Unavailable
	Code_UNAVAILABLE Code = 14
	// Unrecoverable data loss or corruption.
	//
	// HTTP Mapping: 500 Internal Server Error
	Code_DATA_LOSS Code = 15
)