Documentation
¶
Overview ¶
Package devices is a container for device drivers.
Is it now superseded by https://periph.io/x/devices/v3 (or later).
See https://periph.io/news/2020/a_new_start/ for more details.
Source Files
Directories
¶
| Path | Synopsis |
|---|---|
|
Package apa102 drives a strip of APA102 LEDs connected on a SPI port.
|
Package apa102 drives a strip of APA102 LEDs connected on a SPI port. |
|
Package bmxx80 controls a Bosch BMP180/BME280/BMP280 device over I²C, or SPI for the BMx280.
|
Package bmxx80 controls a Bosch BMP180/BME280/BMP280 device over I²C, or SPI for the BMx280. |
|
bmx280smoketest
Package bmx280smoketest is leveraged by periph-smoketest to verify that two BME280/BMP280, one over I²C, one over SPI, read roughly the same temperature, humidity and pressure.
|
Package bmx280smoketest is leveraged by periph-smoketest to verify that two BME280/BMP280, one over I²C, one over SPI, read roughly the same temperature, humidity and pressure. |
|
Package cap1xxx controls a Microchip cap1105/cap1106/cap1114/cap1133/cap1126/cap1128/cap1166/cap1188 device over I²C. The cap1xxx devices are a 3/5/6/8/14 channel capacitive touch sensor with 2/3/6/8/11 LED drivers.
|
Package cap1xxx controls a Microchip cap1105/cap1106/cap1114/cap1133/cap1126/cap1128/cap1166/cap1188 device over I²C. The cap1xxx devices are a 3/5/6/8/14 channel capacitive touch sensor with 2/3/6/8/11 LED drivers. |
|
Package ds18b20 interfaces to Dallas Semi / Maxim DS18B20 and MAX31820 1-wire temperature sensors.
|
Package ds18b20 interfaces to Dallas Semi / Maxim DS18B20 and MAX31820 1-wire temperature sensors. |
|
Package ds248x controls a Maxim DS2483 or DS2482-100 1-wire interface chip over I²C. More details See https://periph.io/device/ds248x/ for more details about the device.
|
Package ds248x controls a Maxim DS2483 or DS2482-100 1-wire interface chip over I²C. More details See https://periph.io/device/ds248x/ for more details about the device. |
|
Package lepton drives a FLIR Lepton Infra Red (IR) camera.
|
Package lepton drives a FLIR Lepton Infra Red (IR) camera. |
|
cci
Package cci declares the Camera Command Interface to interact with a FLIR Lepton over I²C. This protocol controls and queries the camera but is not used to read the images.
|
Package cci declares the Camera Command Interface to interact with a FLIR Lepton over I²C. This protocol controls and queries the camera but is not used to read the images. |
|
image14bit
Package image14bit implements 14-bit per pixel images.
|
Package image14bit implements 14-bit per pixel images. |
|
internal
Package internal contains code shared between cci and lepton.
|
Package internal contains code shared between cci and lepton. |
|
Package lirc implements InfraRed receiver support through native linux app lirc.
|
Package lirc implements InfraRed receiver support through native linux app lirc. |
|
Package ssd1306 controls a 128x64 monochrome OLED display via a SSD1306 controller.
|
Package ssd1306 controls a 128x64 monochrome OLED display via a SSD1306 controller. |
|
image1bit
Package image1bit implements black and white (1 bit per pixel) 2D graphics.
|
Package image1bit implements black and white (1 bit per pixel) 2D graphics. |
|
ssd1306smoketest
Package ssd1306smoketest is leveraged by periph-smoketest to verify that two SSD1306, one over I²C, one over SPI, can display the same output.
|
Package ssd1306smoketest is leveraged by periph-smoketest to verify that two SSD1306, one over I²C, one over SPI, can display the same output. |
|
Package tm1637 controls a TM1637 device over GPIO pins.
|
Package tm1637 controls a TM1637 device over GPIO pins. |
Click to show internal directories.
Click to hide internal directories.