v1alpha3

type DiskSetup struct {
	// Partitions specifies the list of the partitions to setup.
	Partitions []Partition `json:"partitions,omitempty"`
	// Filesystems specifies the list of file systems to setup.
	Filesystems []Filesystem `json:"filesystems,omitempty"`
}

type Encoding string

type File struct {
	// Path specifies the full path on disk where to store the file.
	Path string `json:"path"`

	// Owner specifies the ownership of the file, e.g. "root:root".
	// +optional
	Owner string `json:"owner,omitempty"`

	// Permissions specifies the permissions to assign to the file, e.g. "0640".
	// +optional
	Permissions string `json:"permissions,omitempty"`

	// Encoding specifies the encoding of the file contents.
	// +optional
	Encoding Encoding `json:"encoding,omitempty"`

	// Content is the actual content of the file.
	// +optional
	Content string `json:"content,omitempty"`

	// ContentFrom is a referenced source of content to populate the file.
	// +optional
	ContentFrom *FileSource `json:"contentFrom,omitempty"`
}

type FileSource struct {
	// Secret represents a secret that should populate this file.
	Secret SecretFileSource `json:"secret"`
}

type Filesystem struct {
	// Device specifies the device name
	Device string `json:"device"`
	// Filesystem specifies the file system type.
	Filesystem string `json:"filesystem"`
	// Label specifies the file system label to be used. If set to None, no label is used.
	Label string `json:"label"`
	// Partition specifies the partition to use. The valid options are: "auto|any", "auto", "any", "none", and <NUM>, where NUM is the actual partition number.
	// +optional
	Partition *string `json:"partition,omitempty"`
	// Overwrite defines whether or not to overwrite any existing filesystem.
	// If true, any pre-existing file system will be destroyed. Use with Caution.
	// +optional
	Overwrite *bool `json:"overwrite,omitempty"`
	// ReplaceFS is a special directive, used for Microsoft Azure that instructs cloud-init to replace a file system of <FS_TYPE>.
	// NOTE: unless you define a label, this requires the use of the 'any' partition directive.
	// +optional
	ReplaceFS *string `json:"replaceFS,omitempty"`
	// ExtraOpts defined extra options to add to the command for creating the file system.
	// +optional
	ExtraOpts []string `json:"extraOpts,omitempty"`
}

type Format string

type KubeadmConfigSpec struct {
	// ClusterConfiguration along with InitConfiguration are the configurations necessary for the init command
	// +optional
	ClusterConfiguration *upstreamv1beta1.ClusterConfiguration `json:"clusterConfiguration,omitempty"`

	// InitConfiguration along with ClusterConfiguration are the configurations necessary for the init command
	// +optional
	InitConfiguration *upstreamv1beta1.InitConfiguration `json:"initConfiguration,omitempty"`

	// JoinConfiguration is the kubeadm configuration for the join command
	// +optional
	JoinConfiguration *upstreamv1beta1.JoinConfiguration `json:"joinConfiguration,omitempty"`

	// Files specifies extra files to be passed to user_data upon creation.
	// +optional
	Files []File `json:"files,omitempty"`

	// DiskSetup specifies options for the creation of partition tables and file systems on devices.
	// +optional
	DiskSetup *DiskSetup `json:"diskSetup,omitempty"`

	// Mounts specifies a list of mount points to be setup.
	// +optional
	Mounts []MountPoints `json:"mounts,omitempty"`

	// PreKubeadmCommands specifies extra commands to run before kubeadm runs
	// +optional
	PreKubeadmCommands []string `json:"preKubeadmCommands,omitempty"`

	// PostKubeadmCommands specifies extra commands to run after kubeadm runs
	// +optional
	PostKubeadmCommands []string `json:"postKubeadmCommands,omitempty"`

	// Users specifies extra users to add
	// +optional
	Users []User `json:"users,omitempty"`

	// NTP specifies NTP configuration
	// +optional
	NTP *NTP `json:"ntp,omitempty"`

	// Format specifies the output format of the bootstrap data
	// +optional
	Format Format `json:"format,omitempty"`

	// Verbosity is the number for the kubeadm log level verbosity.
	// It overrides the `--v` flag in kubeadm commands.
	// +optional
	Verbosity *int32 `json:"verbosity,omitempty"`

	// UseExperimentalRetryJoin replaces a basic kubeadm command with a shell
	// script with retries for joins.
	//
	// This is meant to be an experimental temporary workaround on some environments
	// where joins fail due to timing (and other issues). The long term goal is to add retries to
	// kubeadm proper and use that functionality.
	//
	// This will add about 40KB to userdata
	//
	// For more information, refer to https://github.com/kubernetes-sigs/cluster-api/pull/2763#discussion_r397306055.
	// +optional
	UseExperimentalRetryJoin bool `json:"useExperimentalRetryJoin,omitempty"`
}

type KubeadmConfigStatus struct {
	// Ready indicates the BootstrapData field is ready to be consumed
	Ready bool `json:"ready,omitempty"`

	// DataSecretName is the name of the secret that stores the bootstrap data script.
	// +optional
	DataSecretName *string `json:"dataSecretName,omitempty"`

	// BootstrapData will be a cloud-init script for now.
	//
	// Deprecated: Switch to DataSecretName.
	//
	// +optional
	BootstrapData []byte `json:"bootstrapData,omitempty"`

	// FailureReason will be set on non-retryable errors
	// +optional
	FailureReason string `json:"failureReason,omitempty"`

	// FailureMessage will be set on non-retryable errors
	// +optional
	FailureMessage string `json:"failureMessage,omitempty"`

	// ObservedGeneration is the latest generation observed by the controller.
	// +optional
	ObservedGeneration int64 `json:"observedGeneration,omitempty"`

	// Conditions defines current service state of the KubeadmConfig.
	// +optional
	Conditions clusterv1alpha3.Conditions `json:"conditions,omitempty"`
}

type KubeadmConfigTemplateResource struct {
	Spec KubeadmConfigSpec `json:"spec,omitempty"`
}

type KubeadmConfigTemplateSpec struct {
	Template KubeadmConfigTemplateResource `json:"template"`
}

type MountPoints []string

type NTP struct {
	// Servers specifies which NTP servers to use
	// +optional
	Servers []string `json:"servers,omitempty"`

	// Enabled specifies whether NTP should be enabled
	// +optional
	Enabled *bool `json:"enabled,omitempty"`
}

type Partition struct {
	// Device is the name of the device.
	Device string `json:"device"`
	// Layout specifies the device layout.
	// If it is true, a single partition will be created for the entire device.
	// When layout is false, it means don't partition or ignore existing partitioning.
	Layout bool `json:"layout"`
	// Overwrite describes whether to skip checks and create the partition if a partition or filesystem is found on the device.
	// Use with caution. Default is 'false'.
	// +optional
	Overwrite *bool `json:"overwrite,omitempty"`
	// TableType specifies the tupe of partition table. The following are supported:
	// 'mbr': default and setups a MS-DOS partition table
	// 'gpt': setups a GPT partition table
	// +optional
	TableType *string `json:"tableType,omitempty"`
}

type SecretFileSource struct {
	// Name of the secret in the KubeadmBootstrapConfig's namespace to use.
	Name string `json:"name"`

	// Key is the key in the secret's data map for this value.
	Key string `json:"key"`
}

type User struct {
	// Name specifies the user name
	Name string `json:"name"`

	// Gecos specifies the gecos to use for the user
	// +optional
	Gecos *string `json:"gecos,omitempty"`

	// Groups specifies the additional groups for the user
	// +optional
	Groups *string `json:"groups,omitempty"`

	// HomeDir specifies the home directory to use for the user
	// +optional
	HomeDir *string `json:"homeDir,omitempty"`

	// Inactive specifies whether to mark the user as inactive
	// +optional
	Inactive *bool `json:"inactive,omitempty"`

	// Shell specifies the user's shell
	// +optional
	Shell *string `json:"shell,omitempty"`

	// Passwd specifies a hashed password for the user
	// +optional
	Passwd *string `json:"passwd,omitempty"`

	// PrimaryGroup specifies the primary group for the user
	// +optional
	PrimaryGroup *string `json:"primaryGroup,omitempty"`

	// LockPassword specifies if password login should be disabled
	// +optional
	LockPassword *bool `json:"lockPassword,omitempty"`

	// Sudo specifies a sudo role for the user
	// +optional
	Sudo *string `json:"sudo,omitempty"`

	// SSHAuthorizedKeys specifies a list of ssh authorized keys for the user
	// +optional
	SSHAuthorizedKeys []string `json:"sshAuthorizedKeys,omitempty"`
}