client

type APIClient struct {
	AutomationApi *AutomationApiService

	GeospatialDataApi *GeospatialDataApiService
	// contains filtered or unexported fields
}

type APIKey struct {
	Key    string
	Prefix string
}

type APIResponse struct {
	*http.Response `json:"-"`
	Message        string `json:"message,omitempty"`
	// Operation is the name of the swagger operation.
	Operation string `json:"operation,omitempty"`
	// RequestURL is the request URL. This value is always available, even if the
	// embedded *http.Response is nil.
	RequestURL string `json:"url,omitempty"`
	// Method is the HTTP method used for the request.  This value is always
	// available, even if the embedded *http.Response is nil.
	Method string `json:"method,omitempty"`
	// Payload holds the contents of the response body (which may be nil or empty).
	// This is provided here as the raw response.Body() reader will have already
	// been drained.
	Payload []byte `json:"-"`
}

type AutomationApiService service

type AutomationState struct {
	// Automation type.<br> Automation loop evaluates enabled automation types once every second.<br> <p>Supported Types: <li>MOBILITY - Sends Mobility events to Sanbox Controller when UE changes POA. <li>MOVEMENT - Advances UEs along configured paths using previous position & velocity as inputs. <li>POAS-IN-RANGE - Sends POAS-IN-RANGE events to Sanbox Controller when list of POAs in range changes. <li>NETWORK-CHARACTERISTICS-UPDATE - Sends network characteristics update events to Sanbox Controller when throughput values change.
	Type_ string `json:"type,omitempty"`
	// Automation feature state
	Active bool `json:"active,omitempty"`
}

type AutomationStateList struct {
	States []AutomationState `json:"states,omitempty"`
}

type BasicAuth struct {
	UserName string `json:"userName,omitempty"`
	Password string `json:"password,omitempty"`
}

type Configuration struct {
	BasePath      string            `json:"basePath,omitempty"`
	Host          string            `json:"host,omitempty"`
	Scheme        string            `json:"scheme,omitempty"`
	DefaultHeader map[string]string `json:"defaultHeader,omitempty"`
	UserAgent     string            `json:"userAgent,omitempty"`
	HTTPClient    *http.Client
}

type CoordinatePower struct {
	// Latitude of a second element for query purpose.
	Latitude float32 `json:"latitude"`
	// Longitude of a second element for query purpose.
	Longitude float32 `json:"longitude"`
	// Reference Signal Received Quality as defined in ETSI TS 136 214.
	Rsrq int32 `json:"rsrq"`
	// Reference Signal Received Power as defined in ETSI TS 136 214.
	Rsrp int32 `json:"rsrp"`
	// Name of the POA for which RSRP/RSRQ values are calculated.
	PoaName string `json:"poaName"`
}

type CoordinatePowerList struct {
	CoordinatesPower []CoordinatePower `json:"coordinatesPower,omitempty"`
}

type Distance struct {
	// Distance between two points (in meters)
	Distance float32 `json:"distance"`
	// Source asset latitude
	SrcLatitude float32 `json:"srcLatitude,omitempty"`
	// Source asset longitude
	SrcLongitude float32 `json:"srcLongitude,omitempty"`
	// Destination asset latitude
	DstLatitude float32 `json:"dstLatitude,omitempty"`
	// Destination asset longitude
	DstLongitude float32 `json:"dstLongitude,omitempty"`
}

type GenericSwaggerError struct {
	// contains filtered or unexported fields
}

type GeoCoordinate struct {
	// Latitude of a second element for query purpose.
	Latitude float32 `json:"latitude,omitempty"`
	// Longitude of a second element for query purpose.
	Longitude float32 `json:"longitude,omitempty"`
}

type GeoCoordinateList struct {
	GeoCoordinates []GeoCoordinate `json:"geoCoordinates,omitempty"`
}

type GeoData struct {
	Location *Point `json:"location,omitempty"`
	// Optional - Radius (in meters) around the location
	Radius float32     `json:"radius,omitempty"`
	Path   *LineString `json:"path,omitempty"`
	// End-of-Path mode: <li>LOOP: When path endpoint is reached, start over from the beginning <li>REVERSE: When path endpoint is reached, return on the reverse path
	EopMode string `json:"eopMode,omitempty"`
	// Speed of movement along path in m/s
	Velocity   float32  `json:"velocity,omitempty"`
	D2dInRange []string `json:"d2dInRange,omitempty"`
	PoaInRange []string `json:"poaInRange,omitempty"`
}

type GeoDataAsset struct {
	Location *Point `json:"location,omitempty"`
	// Optional - Radius (in meters) around the location
	Radius float32     `json:"radius,omitempty"`
	Path   *LineString `json:"path,omitempty"`
	// End-of-Path mode: <li>LOOP: When path endpoint is reached, start over from the beginning <li>REVERSE: When path endpoint is reached, return on the reverse path
	EopMode string `json:"eopMode,omitempty"`
	// Speed of movement along path in m/s
	Velocity   float32  `json:"velocity,omitempty"`
	D2dInRange []string `json:"d2dInRange,omitempty"`
	PoaInRange []string `json:"poaInRange,omitempty"`
	// Name of geospatial asset
	AssetName string `json:"assetName"`
	// Asset type
	AssetType string `json:"assetType"`
	// Asset sub-type
	SubType string `json:"subType,omitempty"`
}

type GeoDataAssetList struct {
	GeoDataAssets []GeoDataAsset `json:"geoDataAssets,omitempty"`
}

type GeospatialDataApiService service

type GetAssetDataOpts struct {
	AssetType   optional.String
	SubType     optional.String
	ExcludePath optional.String
}

type GetGeoDataByNameOpts struct {
	ExcludePath optional.String
}

type LineString struct {
	// Must be LineString
	Type_ string `json:"type"`
	// For a LineString, coordinates is an array of two or more positions; a position is an array of two decimal numbers (longitude and latitude precisely in that order)
	Coordinates [][]float32 `json:"coordinates,omitempty"`
}

type Point struct {
	// Must be Point
	Type_ string `json:"type"`
	// For a Point, coordinates MUST be an array of two decimal numbers; longitude and latitude precisely in that order
	Coordinates []float32 `json:"coordinates,omitempty"`
}

type TargetPoint struct {
	// Asset name of a second element for query purpose. If present, latitude and longitude are ignored.
	AssetName string `json:"assetName,omitempty"`
	// Latitude of a second element for query purpose. Taken into account only if AssetName is not present.
	Latitude float32 `json:"latitude,omitempty"`
	// Longitude of a second element for query purpose. Taken into account only if AssetName is not present.
	Longitude float32 `json:"longitude,omitempty"`
}

type TargetRange struct {
	// Asset name of a second element for query purpose. If present, latitude and longitude are ignored.
	AssetName string `json:"assetName,omitempty"`
	// Latitude of a second element for query purpose. Taken into account only if AssetName is not present.
	Latitude float32 `json:"latitude,omitempty"`
	// Longitude of a second element for query purpose. Taken into account only if AssetName is not present.
	Longitude float32 `json:"longitude,omitempty"`
	// Radius (in meters) around the location.
	Radius float32 `json:"radius"`
	// Accuracy of the location (in meters).
	Accuracy float32 `json:"accuracy,omitempty"`
}

type WithinRange struct {
	// Source asset latitude
	SrcLatitude float32 `json:"srcLatitude,omitempty"`
	// Source asset longitude
	SrcLongitude float32 `json:"srcLongitude,omitempty"`
	// Destination asset latitude
	DstLatitude float32 `json:"dstLatitude,omitempty"`
	// Destination asset longitude
	DstLongitude float32 `json:"dstLongitude,omitempty"`
	// Within range result (e.g. true = within range, false = beyond range)
	Within bool `json:"within"`
}