csi-digitalocean

csi-digitalocean

A Container Storage Interface (CSI) Driver for DigitalOcean Block Storage. The CSI plugin allows you to use DigitalOcean Block Storage with your preferred Container Orchestrator.

The DigitalOcean CSI plugin is mostly tested on Kubernetes. Theoretically it should also work on other Container Orchestrators, such as Mesos or Cloud Foundry. Feel free to test it on other CO's and give us a feedback.

Releases

The DigitalOcean CSI plugin follows semantic versioning. The version will be bumped following the rules below:

• Bug fixes will be released as a PATCH update.
• New features (such as CSI spec bumps with no breaking changes) will be released as a MINOR update.
• Significant breaking changes makes a MAJOR update.

Features

Below is a list of functionality implemented by the plugin. In general, CSI features implementing an aspect of the specification are available on any DigitalOcean Kubernetes version for which beta support for the feature is provided.

See also the project examples for use cases.

Volume Expansion

Volumes can be expanded by updating the storage request value of the corresponding PVC:

apiVersion: v1
kind: PersistentVolumeClaim
metadata:
  name: csi-pvc
  namespace: default
spec:
  [...]
  resources:
    requests:
      # The field below can be increased.
      storage: 10Gi
      [...]

After successful expansion, the status section of the PVC object will reflect the actual volume capacity.

Important notes:

• Volumes can only be increased in size, not decreased; attempts to do so will lead to an error.
• Expanding a volume that is larger than the target size will have no effect. The PVC object status section will continue to represent the actual volume capacity.
• Resizing volumes other than through the PVC object (e.g., the DigitalOcean cloud control panel) is not recommended as this can potentially cause conflicts. Additionally, size updates will not be reflected in the PVC object status section immediately, and the section will eventually show the actual volume capacity.

Raw Block Volume

Volumes can be used in raw block device mode by setting the volumeMode on the corresponding PVC:

apiVersion: v1
kind: PersistentVolumeClaim
metadata:
  name: csi-pvc
  namespace: default
spec:
  [...]
  volumeMode: Block

Important notes:

• If using volume expansion functionality, only expansion of the underlying persistent volume is guaranteed. We do not guarantee to automatically expand the filesystem if you have formatted the device.

Volume Snapshots

Snapshots can be created and restored through VolumeSnapshot objects.

See also the example.

Volume Statistics

Volume statistics are exposed through the CSI-conformant endpoints. Monitoring systems such as Prometheus can scrape metrics and provide insights into volume usage.

Volume Transfer

Volumes can be transferred across clusters. The exact steps are outlined in our example.

Installing to Kubernetes

Kubernetes Compatibility

The following table describes the required DigitalOcean CSI driver version per Kubernetes release.

Kubernetes Release	DigitalOcean CSI Driver Version
1.10 (1.10.5+)	v0.2.x
1.11	v0.2.x
1.12	v0.4.x
1.13	v1.0.x
1.14	v1.2.x
1.15	v1.2.x
1.16	v1.2.x

Note: The DigitalOcean Kubernetes products comes with the CSI driver pre-installed and no further steps are required.

Requirements:

• --allow-privileged flag must be set to true for both the API server and the kubelet
• --feature-gates=VolumeSnapshotDataSource=true,KubeletPluginsWatcher=true,CSINodeInfo=true,CSIDriverRegistry=true feature gate flags must be set to true for both the API server and the kubelet
• Mount Propagation needs to be enabled. If you use Docker, the Docker daemon of the cluster nodes must allow shared mounts.

1. Create a secret with your DigitalOcean API Access Token:

Replace the placeholder string starting with a05... with your own secret and save it as secret.yml:

apiVersion: v1
kind: Secret
metadata:
  name: digitalocean
  namespace: kube-system
stringData:
  access-token: "a05dd2f26b9b9ac2asdas__REPLACE_ME____123cb5d1ec17513e06da"

and create the secret using kubectl:

$ kubectl create -f ./secret.yml
secret "digitalocean" created

You should now see the digitalocean secret in the kube-system namespace along with other secrets

$ kubectl -n kube-system get secrets
NAME                  TYPE                                  DATA      AGE
default-token-jskxx   kubernetes.io/service-account-token   3         18h
digitalocean          Opaque                                1         18h

2. Deploy the CSI plugin and sidecars:

Before you continue, be sure to checkout to a tagged release. Always use the latest version compatible with your Kubernetes release (see the compatibility information).

The releases directory directory holds manifests for all plugin releases. You can deploy a specific version by executing the command

kubectl apply -f https://raw.githubusercontent.com/digitalocean/csi-digitalocean/master/deploy/kubernetes/releases/csi-digitalocean-vX.Y.Z.yaml

where vX.Y.Z is the plugin target version.

If you see any issues during the installation, this could be because the newly created CRDs haven't been established yet. If you call kubectl apply -f again on the same file, the missing resources will be applied again.

3. Test and verify:

Create a PersistentVolumeClaim. This makes sure a volume is created and provisioned on your behalf:

apiVersion: v1
kind: PersistentVolumeClaim
metadata:
  name: csi-pvc
spec:
  accessModes:
  - ReadWriteOnce
  resources:
    requests:
      storage: 5Gi
  storageClassName: do-block-storage

Check that a new PersistentVolume is created based on your claim:

$ kubectl get pv
NAME                                       CAPACITY   ACCESS MODES   RECLAIM POLICY   STATUS    CLAIM             STORAGECLASS       REASON    AGE
pvc-0879b207-9558-11e8-b6b4-5218f75c62b9   5Gi        RWO            Delete           Bound     default/csi-pvc   do-block-storage             3m

The above output means that the CSI plugin successfully created (provisioned) a new Volume on behalf of you. You should be able to see this newly created volume under the Volumes tab in the DigitalOcean UI

The volume is not attached to any node yet. It'll only attached to a node if a workload (i.e: pod) is scheduled to a specific node. Now let us create a Pod that refers to the above volume. When the Pod is created, the volume will be attached, formatted and mounted to the specified Container:

kind: Pod
apiVersion: v1
metadata:
  name: my-csi-app
spec:
  containers:
    - name: my-frontend
      image: busybox
      volumeMounts:
      - mountPath: "/data"
        name: my-do-volume
      command: [ "sleep", "1000000" ]
  volumes:
    - name: my-do-volume
      persistentVolumeClaim:
        claimName: csi-pvc 

Check if the pod is running successfully:

$ kubectl describe pods/my-csi-app

Write inside the app container:

$ kubectl exec -ti my-csi-app /bin/sh
/ # touch /data/hello-world
/ # exit
$ kubectl exec -ti my-csi-app /bin/sh
/ # ls /data
hello-world

Upgrading

When upgrading to a new Kubernetes minor version, you should upgrade the CSI driver to match. See the table above for which driver version is used with each Kubernetes version.

Special consideration is necessary when upgrading from Kubernetes 1.11 or earlier, which uses CSI driver version 0.2 or earlier. In these early releases, the driver name was com.digitalocean.csi.dobs, while in all subsequent releases it is dobs.csi.digitalocean.com. When upgrading, use the commandline flag --driver-name to force the new driver to use the old name. Failing to do so will cause any existing PVs to be unusable since the new driver will not manage them and the old driver is no longer running.

Development

Requirements:

• Go at the version specified in .github/workflows/test.yaml
• Docker (for building via the Makefile, post-unit testing, and publishing)

Dependencies are managed via Go modules.

PRs from the code-hosting repository are automatically unit- and end-to-end-tested in our CI (implemented by Github Actions). See the .github/workflows directory for details.

For every green build of the master branch, the container image digitalocean/do-csi-plugin:master is updated and pushed at the end of the CI run. This allows to test the latest commit easily.

Steps to run the tests manually are outlined below.

Unit Tests

To execute the unit tests locally, run:

make test

End-to-End Tests

To manually run the end-to-end tests, you need to build a container image for your change first and publish it to a registry. Repository owners can publish under digitalocean/do-csi-plugin:dev:

VERSION=dev make publish

If you do not have write permissions to digitalocean/do-csi-plugin on Docker Hub or are worried about conflicting usage of that tag, you can also publish under a different (presumably personal) organization:

DOCKER_REPO=johndoe VERSION=latest-feature make publish

This would yield the published container image johndoe/do-csi-plugin:latest-feature.

Assuming you have your DO API token assigned to the DIGITALOCEAN_ACCESS_TOKEN environment variable, you can then spin up a DOKS cluster on-the-fly and execute the upstream end-to-end tests for a given set of Kubernetes versions like this:

make test-e2e E2E_ARGS="-driver-image johndoe/do-csi-plugin:latest-feature 1.16 1.15 1.14"

See our documentation for an overview on how the end-to-end tests work as well as usage instructions.

Integration Tests

There is a set of custom integration tests which are mostly useful for Kubernetes pre-1.14 installations as these are not covered by the upstream end-to-end tests.

To run the integration tests on a DOKS cluster, follow the instructions.

Releasing

To release a new version vX.Y.Z, first bump the version:

make NEW_VERSION=vX.Y.Z bump-version

This will create the set of files specific to a new release. Make sure everything looks good; in particular, ensure that the change log is up-to-date and is not missing any important, user-facing changes.

Create a new branch with all changes:

git checkout -b prepare-release-vX.Y.Z
git add .
git push origin

After it is merged to master, wait for the master build to go green. (This will entail another run of the entire test suite.)

Finally, check out the master branch again, tag the release, and push it:

git checkout master
git pull
git tag vX.Y.Z
git push origin vX.Y.Z

The CI will publish the container image digitalocean/do-csi-plugin:vX.Y.Z and create a Github Release under the name vX.Y.Z automatically. Nothing else needs to be done.

Contributing

At DigitalOcean we value and love our community! If you have any issues or would like to contribute, feel free to open an issue or PR.