cmd

package
v0.2.7 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Nov 22, 2019 License: GPL-3.0 Imports: 9 Imported by: 0

Documentation

Overview

Package cmd defines the command line flags for the shared utlities.

Index

Constants

This section is empty.

Variables

View Source
var (
	// VerbosityFlag defines the logrus configuration.
	VerbosityFlag = cli.StringFlag{
		Name:  "verbosity",
		Usage: "Logging verbosity (trace, debug, info=default, warn, error, fatal, panic)",
		Value: "info",
	}
	// DataDirFlag defines a path on disk.
	DataDirFlag = DirectoryFlag{
		Name:  "datadir",
		Usage: "Data directory for the databases and keystore",
		Value: DirectoryString{DefaultDataDir()},
	}
	// EnableTracingFlag defines a flag to enable p2p message tracing.
	EnableTracingFlag = cli.BoolFlag{
		Name:  "enable-tracing",
		Usage: "Enable request tracing.",
	}
	// TracingProcessNameFlag defines a flag to specify a process name.
	TracingProcessNameFlag = cli.StringFlag{
		Name:  "tracing-process-name",
		Usage: "The name to apply to tracing tag \"process_name\"",
	}
	// TracingEndpointFlag flag defines the http endpoint for serving traces to Jaeger.
	TracingEndpointFlag = cli.StringFlag{
		Name:  "tracing-endpoint",
		Usage: "Tracing endpoint defines where beacon chain traces are exposed to Jaeger.",
		Value: "http://127.0.0.1:14268",
	}
	// TraceSampleFractionFlag defines a flag to indicate what fraction of p2p
	// messages are sampled for tracing.
	TraceSampleFractionFlag = cli.Float64Flag{
		Name:  "trace-sample-fraction",
		Usage: "Indicate what fraction of p2p messages are sampled for tracing.",
		Value: 0.20,
	}
	// DisableMonitoringFlag defines a flag to disable the metrics collection.
	DisableMonitoringFlag = cli.BoolFlag{
		Name:  "disable-monitoring",
		Usage: "Disable monitoring service.",
	}
	// MonitoringPortFlag defines the http port used to serve prometheus metrics.
	MonitoringPortFlag = cli.Int64Flag{
		Name:  "monitoring-port",
		Usage: "Port used to listening and respond metrics for prometheus.",
		Value: 8080,
	}
	// NoDiscovery specifies whether we are running a local network and have no need for connecting
	// to the bootstrap nodes in the cloud
	NoDiscovery = cli.BoolFlag{
		Name:  "no-discovery",
		Usage: "Enable only local network p2p and do not connect to cloud bootstrap nodes.",
	}
	// StaticPeers specifies a set of peers to connect to explicitly.
	StaticPeers = cli.StringSliceFlag{
		Name:  "peer",
		Usage: "Connect with this peer. This flag may be used multiple times.",
	}
	// BootstrapNode tells the beacon node which bootstrap node to connect to
	BootstrapNode = cli.StringFlag{
		Name:  "bootstrap-node",
		Usage: "The address of bootstrap node. Beacon node will connect for peer discovery via DHT.  Multiple nodes can be separated with a comma",
		Value: "/dns4/prylabs.net/tcp/30001/p2p/16Uiu2HAm7Qwe19vz9WzD2Mxn7fXd1vgHHp4iccuyq7TxwRXoAGfc",
	}
	// RelayNode tells the beacon node which relay node to connect to.
	RelayNode = cli.StringFlag{
		Name: "relay-node",
		Usage: "The address of relay node. The beacon node will connect to the " +
			"relay node and advertise their address via the relay node to other peers",
		Value: "",
	}
	// P2PUDPPort defines the port to be used by discv5.
	P2PUDPPort = cli.IntFlag{
		Name:  "p2p-udp-port",
		Usage: "The port used by discv5.",
		Value: 12000,
	}
	// P2PTCPPort defines the port to be used by libp2p.
	P2PTCPPort = cli.IntFlag{
		Name:  "p2p-tcp-port",
		Usage: "The port used by libp2p.",
		Value: 13000,
	}
	// P2PHost defines the host IP to be used by libp2p.
	P2PHost = cli.StringFlag{
		Name:  "p2p-host-ip",
		Usage: "The IP address advertised by libp2p. This may be used to advertise an external IP.",
		Value: "",
	}
	// P2PPrivKey defines a flag to specify the location of the private key file for libp2p.
	P2PPrivKey = cli.StringFlag{
		Name:  "p2p-priv-key",
		Usage: "The file containing the private key to use in communications with other peers.",
		Value: "",
	}
	// P2PMaxPeers defines a flag to specify the max number of peers in libp2p.
	P2PMaxPeers = cli.Int64Flag{
		Name:  "p2p-max-peers",
		Usage: "The max number of p2p peers to maintain.",
		Value: 30,
	}
	// P2PWhitelist defines a CIDR subnet to exclusively allow connections.
	P2PWhitelist = cli.StringFlag{
		Name: "p2p-whitelist",
		Usage: "The CIDR subnet for whitelisting peer connections. Example: 192.168.0.0/16 " +
			"would whitelist connections to peers on your local network only. The default " +
			"is to accept all connections.",
	}
	// P2PEncoding defines the encoding format for p2p messages.
	P2PEncoding = cli.StringFlag{
		Name:  "p2p-encoding",
		Usage: "The encoding format of messages sent over the wire. The default is 0, which represents ssz",
		Value: "ssz",
	}
	// ForceClearDB removes any previously stored data at the data directory.
	ForceClearDB = cli.BoolFlag{
		Name:  "force-clear-db",
		Usage: "Clear any previously stored data at the data directory",
	}
	// ClearDB prompts user to see if they want to remove any previously stored data at the data directory.
	ClearDB = cli.BoolFlag{
		Name:  "clear-db",
		Usage: "Prompt for clearing any previously stored data at the data directory",
	}
	// LogFormat specifies the log output format.
	LogFormat = cli.StringFlag{
		Name:  "log-format",
		Usage: "Specify log formatting. Supports: text, json, fluentd.",
		Value: "text",
	}
	// MaxGoroutines specifies the maximum amount of goroutines tolerated, before a status check fails.
	MaxGoroutines = cli.Int64Flag{
		Name:  "max-goroutines",
		Usage: "Specifies the upper limit of goroutines running before a status check fails",
		Value: 5000,
	}
	// LogFileName specifies the log output file name.
	LogFileName = cli.StringFlag{
		Name:  "log-file",
		Usage: "Specify log file name, relative or absolute",
	}
	// EnableUPnPFlag specifies if UPnP should be enabled or not. The default value is false.
	EnableUPnPFlag = cli.BoolFlag{
		Name:  "enable-upnp",
		Usage: "Enable the service (Beacon chain or Validator) to use UPnP when possible.",
	}
)

Functions

func DefaultDataDir

func DefaultDataDir() string

DefaultDataDir is the default data directory to use for the databases and other persistence requirements.

Types

type DirectoryFlag

type DirectoryFlag struct {
	Name  string
	Value DirectoryString
	Usage string
}

DirectoryFlag expands the received string to an absolute path. e.g. ~/.ethereum -> /home/username/.ethereum

func (DirectoryFlag) Apply

func (d DirectoryFlag) Apply(set *flag.FlagSet)

Apply is called by cli library, grabs variable from environment (if in env) and adds variable to flag set for parsing.

func (DirectoryFlag) GetName

func (d DirectoryFlag) GetName() string

GetName of directory.

func (*DirectoryFlag) Set

func (d *DirectoryFlag) Set(value string)

Set flag value.

func (DirectoryFlag) String

func (d DirectoryFlag) String() string

type DirectoryString

type DirectoryString struct {
	Value string
}

DirectoryString -- Custom type which is registered in the flags library which cli uses for argument parsing. This allows us to expand Value to an absolute path when the argument is parsed.

func (*DirectoryString) Set

func (d *DirectoryString) Set(value string) error

Set directory string value

func (*DirectoryString) String

func (d *DirectoryString) String() string

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL