aqpb

type Sample struct {

	// ---------- Board fields ----------
	Sysid            uint64  `protobuf:"varint,1,opt,name=sysid,proto3" json:"sysid,omitempty"`                                                  // Hardware id
	FirmwareVersion  uint64  `protobuf:"varint,2,opt,name=firmware_version,json=firmwareVersion,proto3" json:"firmware_version,omitempty"`       // Versioning info
	Uptime           int64   `protobuf:"varint,3,opt,name=uptime,proto3" json:"uptime,omitempty"`                                                // Uptime of the system - number of milliseconds since reboot.
	BoardTemp        float32 `protobuf:"fixed32,4,opt,name=board_temp,json=boardTemp,proto3" json:"board_temp,omitempty"`                        // Board temperature in celsius
	BoardRelHumidity float32 `protobuf:"fixed32,5,opt,name=board_rel_humidity,json=boardRelHumidity,proto3" json:"board_rel_humidity,omitempty"` // Board relative humidity in percent
	Status           uint64  `protobuf:"varint,6,opt,name=status,proto3" json:"status,omitempty"`                                                // Generic status bit field (for future use)
	// ---------- GPS fields ----------
	// If the GPS cannot get a fix these fields will all be zeroed.
	GpsTimestamp float32 `protobuf:"fixed32,7,opt,name=gps_timestamp,json=gpsTimestamp,proto3" json:"gps_timestamp,omitempty"` // Timestamp from the GPS
	Lat          float32 `protobuf:"fixed32,8,opt,name=lat,proto3" json:"lat,omitempty"`                                       // Latitude in radians
	Lon          float32 `protobuf:"fixed32,9,opt,name=lon,proto3" json:"lon,omitempty"`                                       // Longitude in radians
	Alt          float32 `protobuf:"fixed32,10,opt,name=alt,proto3" json:"alt,omitempty"`                                      // Altitude in meters
	// ---------- AFE3 fields ----------
	// In order to obtain the measurement in mV the sensor readinggs
	// below have to be multiplied by 0.000000596046.  On the
	// calibration datasheet for each sensor there will be an offset
	// value for each sensor (given in mV).
	//
	Sensor_1Work      uint32 `protobuf:"varint,20,opt,name=sensor_1_work,json=sensor1Work,proto3" json:"sensor_1_work,omitempty"`                     // OP1 ADC reading - NO2 working electrode
	Sensor_1Aux       uint32 `protobuf:"varint,21,opt,name=sensor_1_aux,json=sensor1Aux,proto3" json:"sensor_1_aux,omitempty"`                        // OP2 ADC reading - NO2 auxillary electrode
	Sensor_2Work      uint32 `protobuf:"varint,22,opt,name=sensor_2_work,json=sensor2Work,proto3" json:"sensor_2_work,omitempty"`                     // OP3 ADC reading - O3+NO2 working electrode
	Sensor_2Aux       uint32 `protobuf:"varint,23,opt,name=sensor_2_aux,json=sensor2Aux,proto3" json:"sensor_2_aux,omitempty"`                        // OP4 ADC reading - O3+NO2 auxillary electrode
	Sensor_3Work      uint32 `protobuf:"varint,24,opt,name=sensor_3_work,json=sensor3Work,proto3" json:"sensor_3_work,omitempty"`                     // OP5 ADC reading - NO working electrode
	Sensor_3Aux       uint32 `protobuf:"varint,25,opt,name=sensor_3_aux,json=sensor3Aux,proto3" json:"sensor_3_aux,omitempty"`                        // OP6 ADC reading - NO aux electrode
	Afe3TempRaw       uint32 `protobuf:"varint,26,opt,name=afe3_temp_raw,json=afe3TempRaw,proto3" json:"afe3_temp_raw,omitempty"`                     // Pt1000 ADC reading - AFE-3 ambient temperature
	OpcPmA            uint32 `protobuf:"varint,30,opt,name=opc_pm_a,json=opcPmA,proto3" json:"opc_pm_a,omitempty"`                                    // OPC PM A (default PM1)
	OpcPmB            uint32 `protobuf:"varint,31,opt,name=opc_pm_b,json=opcPmB,proto3" json:"opc_pm_b,omitempty"`                                    // OPC PM B (default PM2.5)
	OpcPmC            uint32 `protobuf:"varint,32,opt,name=opc_pm_c,json=opcPmC,proto3" json:"opc_pm_c,omitempty"`                                    // OPC PM C (default PM10)
	OpcSamplePeriod   uint32 `protobuf:"varint,33,opt,name=opc_sample_period,json=opcSamplePeriod,proto3" json:"opc_sample_period,omitempty"`         // OPC sample period, in ms
	OpcSampleFlowRate uint32 `protobuf:"varint,34,opt,name=opc_sample_flow_rate,json=opcSampleFlowRate,proto3" json:"opc_sample_flow_rate,omitempty"` // OPC sample flow rate, in <UNIT???>
	OpcTemp           uint32 `protobuf:"varint,35,opt,name=opc_temp,json=opcTemp,proto3" json:"opc_temp,omitempty"`                                   // OPC temperature, in <UNIT???>
	OpcHum            uint32 `protobuf:"varint,36,opt,name=opc_hum,json=opcHum,proto3" json:"opc_hum,omitempty"`                                      // OPC temperature, in <UNIT???>
	OpcFanRevcount    uint32 `protobuf:"varint,37,opt,name=opc_fan_revcount,json=opcFanRevcount,proto3" json:"opc_fan_revcount,omitempty"`            // OPC fan rev count
	OpcLaserStatus    uint32 `protobuf:"varint,38,opt,name=opc_laser_status,json=opcLaserStatus,proto3" json:"opc_laser_status,omitempty"`            // OPC laser status, <DOC???>
	OpcSampleValid    uint32 `protobuf:"varint,39,opt,name=opc_sample_valid,json=opcSampleValid,proto3" json:"opc_sample_valid,omitempty"`            // OPC Sample valid
	// OPC PM bin 0 to 23
	OpcBin_0  uint32  `protobuf:"varint,40,opt,name=opc_bin_0,json=opcBin0,proto3" json:"opc_bin_0,omitempty"`    // OPC PM bin 0
	OpcBin_1  uint32  `protobuf:"varint,41,opt,name=opc_bin_1,json=opcBin1,proto3" json:"opc_bin_1,omitempty"`    // OPC PM bin 1
	OpcBin_2  uint32  `protobuf:"varint,42,opt,name=opc_bin_2,json=opcBin2,proto3" json:"opc_bin_2,omitempty"`    // OPC PM bin 2
	OpcBin_3  uint32  `protobuf:"varint,43,opt,name=opc_bin_3,json=opcBin3,proto3" json:"opc_bin_3,omitempty"`    // OPC PM bin 3
	OpcBin_4  uint32  `protobuf:"varint,44,opt,name=opc_bin_4,json=opcBin4,proto3" json:"opc_bin_4,omitempty"`    // OPC PM bin 4
	OpcBin_5  uint32  `protobuf:"varint,45,opt,name=opc_bin_5,json=opcBin5,proto3" json:"opc_bin_5,omitempty"`    // OPC PM bin 5
	OpcBin_6  uint32  `protobuf:"varint,46,opt,name=opc_bin_6,json=opcBin6,proto3" json:"opc_bin_6,omitempty"`    // OPC PM bin 6
	OpcBin_7  uint32  `protobuf:"varint,47,opt,name=opc_bin_7,json=opcBin7,proto3" json:"opc_bin_7,omitempty"`    // OPC PM bin 7
	OpcBin_8  uint32  `protobuf:"varint,48,opt,name=opc_bin_8,json=opcBin8,proto3" json:"opc_bin_8,omitempty"`    // OPC PM bin 8
	OpcBin_9  uint32  `protobuf:"varint,49,opt,name=opc_bin_9,json=opcBin9,proto3" json:"opc_bin_9,omitempty"`    // OPC PM bin 9
	OpcBin_10 uint32  `protobuf:"varint,50,opt,name=opc_bin_10,json=opcBin10,proto3" json:"opc_bin_10,omitempty"` // OPC PM bin 10
	OpcBin_11 uint32  `protobuf:"varint,51,opt,name=opc_bin_11,json=opcBin11,proto3" json:"opc_bin_11,omitempty"` // OPC PM bin 11
	OpcBin_12 uint32  `protobuf:"varint,52,opt,name=opc_bin_12,json=opcBin12,proto3" json:"opc_bin_12,omitempty"` // OPC PM bin 12
	OpcBin_13 uint32  `protobuf:"varint,53,opt,name=opc_bin_13,json=opcBin13,proto3" json:"opc_bin_13,omitempty"` // OPC PM bin 13
	OpcBin_14 uint32  `protobuf:"varint,54,opt,name=opc_bin_14,json=opcBin14,proto3" json:"opc_bin_14,omitempty"` // OPC PM bin 14
	OpcBin_15 uint32  `protobuf:"varint,55,opt,name=opc_bin_15,json=opcBin15,proto3" json:"opc_bin_15,omitempty"` // OPC PM bin 15
	OpcBin_16 uint32  `protobuf:"varint,56,opt,name=opc_bin_16,json=opcBin16,proto3" json:"opc_bin_16,omitempty"` // OPC PM bin 16
	OpcBin_17 uint32  `protobuf:"varint,57,opt,name=opc_bin_17,json=opcBin17,proto3" json:"opc_bin_17,omitempty"` // OPC PM bin 17
	OpcBin_18 uint32  `protobuf:"varint,58,opt,name=opc_bin_18,json=opcBin18,proto3" json:"opc_bin_18,omitempty"` // OPC PM bin 18
	OpcBin_19 uint32  `protobuf:"varint,59,opt,name=opc_bin_19,json=opcBin19,proto3" json:"opc_bin_19,omitempty"` // OPC PM bin 19
	OpcBin_20 uint32  `protobuf:"varint,60,opt,name=opc_bin_20,json=opcBin20,proto3" json:"opc_bin_20,omitempty"` // OPC PM bin 20
	OpcBin_21 uint32  `protobuf:"varint,61,opt,name=opc_bin_21,json=opcBin21,proto3" json:"opc_bin_21,omitempty"` // OPC PM bin 21
	OpcBin_22 uint32  `protobuf:"varint,62,opt,name=opc_bin_22,json=opcBin22,proto3" json:"opc_bin_22,omitempty"` // OPC PM bin 22
	OpcBin_23 uint32  `protobuf:"varint,63,opt,name=opc_bin_23,json=opcBin23,proto3" json:"opc_bin_23,omitempty"` // OPC PM bin 23
	Pm1       float32 `protobuf:"fixed32,64,opt,name=pm1,proto3" json:"pm1,omitempty"`                            // OPC PM A (default PM1)
	Pm25      float32 `protobuf:"fixed32,65,opt,name=pm25,proto3" json:"pm25,omitempty"`                          // OPC PM B (default PM2.5)
	Pm10      float32 `protobuf:"fixed32,66,opt,name=pm10,proto3" json:"pm10,omitempty"`                          // OPC PM C (default PM10)
	// contains filtered or unexported fields
}