enums

const (
	// Could not determine Build Type
	BuildType_UNKNOWN_BUILD_TYPE BuildType = 0
	// Cluster Build
	BuildType_CLUSTER BuildType = 1
	// GCB Build
	BuildType_GCB BuildType = 2
	// Local Build
	BuildType_LOCAL BuildType = 3
)

const (
	// Could not determine builder type
	BuilderType_UNKNOWN_BUILDER_TYPE BuilderType = 0
	// JIB Builder
	BuilderType_JIB BuilderType = 1
	// Bazel Builder
	BuilderType_BAZEL BuilderType = 2
	// Buildpacks Builder
	BuilderType_BUILDPACKS BuilderType = 3
	// Custom Builder
	BuilderType_CUSTOM BuilderType = 4
	// Kaniko Builder
	BuilderType_KANIKO BuilderType = 5
	// Docker Builder
	BuilderType_DOCKER BuilderType = 6
	// Ko Builder
	BuilderType_KO BuilderType = 7
)

const (
	// Could not determine Cluster Type
	ClusterType_UNKNOWN_CLUSTER_TYPE ClusterType = 0
	// Minikube Cluster
	ClusterType_MINIKUBE ClusterType = 1
	// GKE cluster
	ClusterType_GKE ClusterType = 2
	// All Cluster except Minikube and GKE
	ClusterType_OTHER ClusterType = 3
)

const (
	// Could not determine Deployer Type
	DeployerType_UNKNOWN_DEPLOYER_TYPE DeployerType = 0
	// Helm Deployer
	DeployerType_HELM DeployerType = 1
	// Kustomize Deployer
	DeployerType_KUSTOMIZE DeployerType = 2
	// Kubectl Deployer
	DeployerType_KUBECTL DeployerType = 3
	// kpt Deployer
	DeployerType_KPT DeployerType = 4
)

const (
	// Debug Level
	LogLevel_DEBUG LogLevel = 0
	// Info Level
	LogLevel_INFO LogLevel = 1
	// Warn Level
	LogLevel_WARN LogLevel = 2
	// Error Level
	LogLevel_ERROR LogLevel = 3
	// Fatal Level
	LogLevel_FATAL LogLevel = 4
	// Panic Level
	LogLevel_PANIC LogLevel = 5
	// Trace Level
	LogLevel_TRACE LogLevel = 6
	// User-visible output level
	LogLevel_STANDARD LogLevel = 7
)

const (
	// Could not determine Render Type
	RenderType_UNKNOWN_RENDER_TYPE RenderType = 0
	// Raw Manifests
	RenderType_RAWK8S RenderType = 1
	// kustomize manifests
	RenderType_KUSTOMIZE_MANIFEST RenderType = 2
	// helm charts
	RenderType_HELM_CHART RenderType = 3
	// kpt manifests
	RenderType_KPT_MANIFEST RenderType = 4
)

const (
	// A default status code for events that do not have an associated phase.
	// Typically seen with the DevEndEvent event on success.
	StatusCode_OK StatusCode = 0
	// Status Check Success
	StatusCode_STATUSCHECK_SUCCESS StatusCode = 200
	// Build Success
	StatusCode_BUILD_SUCCESS StatusCode = 201
	// Render Success
	StatusCode_RENDER_SUCCESS StatusCode = 204
	// Deploy Success
	StatusCode_DEPLOY_SUCCESS StatusCode = 202
	// Test Success
	StatusCode_TEST_SUCCESS StatusCode = 203
	// Build error due to push access denied
	StatusCode_BUILD_PUSH_ACCESS_DENIED StatusCode = 101
	// Build error due to GCP project not found.
	StatusCode_BUILD_PROJECT_NOT_FOUND StatusCode = 102
	// Docker build error due to docker daemon not running
	StatusCode_BUILD_DOCKER_DAEMON_NOT_RUNNING StatusCode = 103
	// Build error due to user application code, e.g. compilation error, dockerfile error etc
	StatusCode_BUILD_USER_ERROR StatusCode = 104
	// Build error due to docker not available
	StatusCode_BUILD_DOCKER_UNAVAILABLE StatusCode = 105
	// Docker build error due to user not authorized to perform the action
	StatusCode_BUILD_DOCKER_UNAUTHORIZED StatusCode = 106
	// Docker system build error
	StatusCode_BUILD_DOCKER_SYSTEM_ERR StatusCode = 107
	// Docker build error due to Docker build container is already in the desired state
	StatusCode_BUILD_DOCKER_NOT_MODIFIED_ERR StatusCode = 108
	// Docker build error indicating a feature not supported
	StatusCode_BUILD_DOCKER_NOT_IMPLEMENTED_ERR StatusCode = 109
	// Docker build error indicates that for given build, data was lost or there is data corruption
	StatusCode_BUILD_DOCKER_DATA_LOSS_ERR StatusCode = 110
	// Docker build error indicates user is forbidden to perform the build or step/action.
	StatusCode_BUILD_DOCKER_FORBIDDEN_ERR StatusCode = 111
	// Docker build error due to some internal error and docker container state conflicts with the requested action and can't be performed
	StatusCode_BUILD_DOCKER_CONFLICT_ERR StatusCode = 112
	// Docker build error indicates the requested object does not exist
	StatusCode_BUILD_DOCKER_ERROR_NOT_FOUND StatusCode = 113
	// Docker build error indication invalid parameter sent to docker command
	StatusCode_BUILD_DOCKER_INVALID_PARAM_ERR StatusCode = 114
	// Docker build failed due to dockerfile not found
	StatusCode_BUILD_DOCKERFILE_NOT_FOUND StatusCode = 115
	// Docker build failed due `cacheFrom` user config error
	StatusCode_BUILD_DOCKER_CACHE_FROM_PULL_ERR StatusCode = 116
	// Build error due to digest for built artifact could not be retrieved from docker daemon.
	StatusCode_BUILD_DOCKER_GET_DIGEST_ERR StatusCode = 117
	// Build error due no space left in docker.
	StatusCode_BUILD_DOCKER_NO_SPACE_ERR StatusCode = 127
	// Build error due to digest for built artifact could not be retrieved from registry.
	StatusCode_BUILD_REGISTRY_GET_DIGEST_ERR StatusCode = 118
	// Build error indicating unknown Jib plugin type. Should be one of [maven, gradle]
	StatusCode_BUILD_UNKNOWN_JIB_PLUGIN_TYPE StatusCode = 119
	// Build error determining dependency for jib gradle project.
	StatusCode_BUILD_JIB_GRADLE_DEP_ERR StatusCode = 120
	// Build error determining dependency for jib gradle project.
	StatusCode_BUILD_JIB_MAVEN_DEP_ERR StatusCode = 121
	// Docker build error when listing containers.
	StatusCode_INIT_DOCKER_NETWORK_LISTING_CONTAINERS StatusCode = 122
	// Docker build error indicating an invalid container name (or id).
	StatusCode_INIT_DOCKER_NETWORK_INVALID_CONTAINER_NAME StatusCode = 123
	// Docker build error indicating the container referenced does not exists in the docker context used.
	StatusCode_INIT_DOCKER_NETWORK_CONTAINER_DOES_NOT_EXIST StatusCode = 124
	// Docker Network invalid mode
	StatusCode_INIT_DOCKER_NETWORK_INVALID_MODE StatusCode = 125
	// Error parsing Docker Network mode
	StatusCode_INIT_DOCKER_NETWORK_PARSE_ERR StatusCode = 126
	// GCB Create Build Error
	StatusCode_BUILD_GCB_CREATE_BUILD_ERR StatusCode = 128
	// GCB error indicating an error to fetch build id.
	StatusCode_BUILD_GCB_GET_BUILD_ID_ERR StatusCode = 129
	// GCB error indicating an error to fetch build status.
	StatusCode_BUILD_GCB_GET_BUILD_STATUS_ERR StatusCode = 130
	// GCB error indicating an error to fetch build logs.
	StatusCode_BUILD_GCB_GET_BUILD_LOG_ERR StatusCode = 131
	// GCB error indicating an error to fetch build status.
	StatusCode_BUILD_GCB_COPY_BUILD_LOG_ERR StatusCode = 132
	// GCB error indicating an error retrieving the built image id.
	StatusCode_BUILD_GCB_GET_BUILT_IMAGE_ERR StatusCode = 133
	// GCB error indicating build failure.
	StatusCode_BUILD_GCB_BUILD_FAILED StatusCode = 134
	// GCB error indicating build failure due to internal errror.
	StatusCode_BUILD_GCB_BUILD_INTERNAL_ERR StatusCode = 135
	// GCB error indicating build failure due to timeout.
	StatusCode_BUILD_GCB_BUILD_TIMEOUT StatusCode = 136
	// GCB error to generate the build descriptor.
	StatusCode_BUILD_GCB_GENERATE_BUILD_DESCRIPTOR_ERR StatusCode = 137
	// GCB error to upload to GCS.
	StatusCode_BUILD_GCB_UPLOAD_TO_GCS_ERR StatusCode = 138
	// GCB error to fetch jib artifact dependency.
	StatusCode_BUILD_GCB_JIB_DEPENDENCY_ERR StatusCode = 139
	// GCB error to fetch artifact dependency.
	StatusCode_BUILD_GCB_GET_DEPENDENCY_ERR StatusCode = 140
	// GCB error to get GCS bucket.
	StatusCode_BUILD_GCB_GET_GCS_BUCKET_ERR StatusCode = 141
	// GCB error to create a GCS bucket.
	StatusCode_BUILD_GCB_CREATE_BUCKET_ERR StatusCode = 142
	// GCB error to extract Project ID.
	StatusCode_BUILD_GCB_EXTRACT_PROJECT_ID StatusCode = 143
	// GCB error to get cloud storage client to perform GCS operation.
	StatusCode_BUILD_GET_CLOUD_STORAGE_CLIENT_ERR StatusCode = 144
	// GCB error to get cloud build client to perform GCB operations.
	StatusCode_BUILD_GET_CLOUD_BUILD_CLIENT_ERR StatusCode = 145
	// Value provided to --platform flag cannot be parsed
	StatusCode_BUILD_UNKNOWN_PLATFORM_FLAG StatusCode = 150
	// Container image pull error
	StatusCode_STATUSCHECK_IMAGE_PULL_ERR StatusCode = 300
	// Container creating error
	StatusCode_STATUSCHECK_CONTAINER_CREATING StatusCode = 301
	// Container run error
	StatusCode_STATUSCHECK_RUN_CONTAINER_ERR StatusCode = 302
	// Container is already terminated
	StatusCode_STATUSCHECK_CONTAINER_TERMINATED StatusCode = 303
	// Deployment waiting for rollout
	StatusCode_STATUSCHECK_DEPLOYMENT_ROLLOUT_PENDING StatusCode = 304
	// Standalone pods pending to stabilize
	StatusCode_STATUSCHECK_STANDALONE_PODS_PENDING StatusCode = 305
	// Container restarting error
	StatusCode_STATUSCHECK_CONTAINER_RESTARTING StatusCode = 356
	// Readiness probe failed
	StatusCode_STATUSCHECK_UNHEALTHY StatusCode = 357
	// Executable binary format error
	StatusCode_STATUSCHECK_CONTAINER_EXEC_ERROR StatusCode = 358
	// Node memory pressure error
	StatusCode_STATUSCHECK_NODE_MEMORY_PRESSURE StatusCode = 400
	// Node disk pressure error
	StatusCode_STATUSCHECK_NODE_DISK_PRESSURE StatusCode = 401
	// Node network unavailable error
	StatusCode_STATUSCHECK_NODE_NETWORK_UNAVAILABLE StatusCode = 402
	// Node PID pressure error
	StatusCode_STATUSCHECK_NODE_PID_PRESSURE StatusCode = 403
	// Node unschedulable error
	StatusCode_STATUSCHECK_NODE_UNSCHEDULABLE StatusCode = 404
	// Node unreachable error
	StatusCode_STATUSCHECK_NODE_UNREACHABLE StatusCode = 405
	// Node not ready error
	StatusCode_STATUSCHECK_NODE_NOT_READY StatusCode = 406
	// Scheduler failure error
	StatusCode_STATUSCHECK_FAILED_SCHEDULING StatusCode = 407
	// Kubectl connection error
	StatusCode_STATUSCHECK_KUBECTL_CONNECTION_ERR StatusCode = 409
	// Kubectl process killed error
	StatusCode_STATUSCHECK_KUBECTL_PID_KILLED StatusCode = 410
	// Kubectl client fetch err
	StatusCode_STATUSCHECK_KUBECTL_CLIENT_FETCH_ERR             StatusCode = 411
	StatusCode_STATUSCHECK_DEPLOYMENT_FETCH_ERR                 StatusCode = 412
	StatusCode_STATUSCHECK_STANDALONE_PODS_FETCH_ERR            StatusCode = 413
	StatusCode_STATUSCHECK_CONFIG_CONNECTOR_RESOURCES_FETCH_ERR StatusCode = 414
	StatusCode_STATUSCHECK_STATEFULSET_FETCH_ERR                StatusCode = 415
	// Pod Initializing
	StatusCode_STATUSCHECK_POD_INITIALIZING StatusCode = 451
	// The actual state of the resource has not yet reached the desired state
	StatusCode_STATUSCHECK_CONFIG_CONNECTOR_IN_PROGRESS StatusCode = 452
	// The process of reconciling the actual state with the desired state has encountered an error
	StatusCode_STATUSCHECK_CONFIG_CONNECTOR_FAILED StatusCode = 453
	// The resource is in the process of being deleted
	StatusCode_STATUSCHECK_CONFIG_CONNECTOR_TERMINATING StatusCode = 454
	// The resource does not exist
	StatusCode_STATUSCHECK_CONFIG_CONNECTOR_NOT_FOUND StatusCode = 455
	// Could not determine error and phase
	StatusCode_UNKNOWN_ERROR StatusCode = 500
	// Status Check error unknown
	StatusCode_STATUSCHECK_UNKNOWN StatusCode = 501
	// Container is unschedulable due to unknown reasons
	StatusCode_STATUSCHECK_UNKNOWN_UNSCHEDULABLE StatusCode = 502
	// Container is waiting due to unknown reason
	StatusCode_STATUSCHECK_CONTAINER_WAITING_UNKNOWN StatusCode = 503
	// Container event reason unknown
	StatusCode_STATUSCHECK_UNKNOWN_EVENT StatusCode = 509
	// Status Check internal error
	StatusCode_STATUSCHECK_INTERNAL_ERROR StatusCode = 514
	// Deploy failed due to unknown reason
	StatusCode_DEPLOY_UNKNOWN StatusCode = 504
	// SYNC failed due to known reason
	StatusCode_SYNC_UNKNOWN StatusCode = 505
	// Build failed due to unknown reason
	StatusCode_BUILD_UNKNOWN StatusCode = 506
	// Dev Init failed due to unknown reason
	StatusCode_DEVINIT_UNKNOWN StatusCode = 507
	// Cleanup failed due to unknown reason
	StatusCode_CLEANUP_UNKNOWN StatusCode = 508
	// Initialization of the Skaffold session failed due to unknown reason(s)
	StatusCode_INIT_UNKNOWN StatusCode = 510
	// Build failed due to docker unknown error
	StatusCode_BUILD_DOCKER_UNKNOWN StatusCode = 511
	// Test failed due to unknown reason
	StatusCode_TEST_UNKNOWN StatusCode = 512
	// GCB error indicating build failed due to unknown status.
	StatusCode_BUILD_GCB_BUILD_UNKNOWN_STATUS StatusCode = 513
	// File Sync Initialize failure
	StatusCode_SYNC_INIT_ERROR StatusCode = 601
	// Failed to configure watcher for build dependencies in dev loop
	StatusCode_DEVINIT_REGISTER_BUILD_DEPS StatusCode = 701
	// Failed to configure watcher for test dependencies in dev loop
	StatusCode_DEVINIT_REGISTER_TEST_DEPS StatusCode = 702
	// Failed to configure watcher for deploy dependencies in dev loop
	StatusCode_DEVINIT_REGISTER_DEPLOY_DEPS StatusCode = 703
	// Failed to configure watcher for Skaffold configuration file.
	StatusCode_DEVINIT_REGISTER_CONFIG_DEP StatusCode = 704
	// Failed to configure watcher for build dependencies for a base image with v1 manifest.
	StatusCode_DEVINIT_UNSUPPORTED_V1_MANIFEST StatusCode = 705
	// User cancelled the skaffold dev run
	StatusCode_STATUSCHECK_USER_CANCELLED StatusCode = 800
	// Deadline for status check exceeded
	StatusCode_STATUSCHECK_DEADLINE_EXCEEDED StatusCode = 801
	// Build Cancelled
	StatusCode_BUILD_CANCELLED StatusCode = 802
	// Deploy cancelled due to user cancellation or one or more deployers failed.
	StatusCode_DEPLOY_CANCELLED StatusCode = 803
	// Docker build cancelled.
	StatusCode_BUILD_DOCKER_CANCELLED StatusCode = 804
	// Build error due to docker deadline was reached before the docker action completed
	StatusCode_BUILD_DOCKER_DEADLINE StatusCode = 805
	// GCB Build cancelled.
	StatusCode_BUILD_GCB_BUILD_CANCELLED StatusCode = 806
	// Skaffold was unable to create the configured tagger
	StatusCode_INIT_CREATE_TAGGER_ERROR StatusCode = 901
	// Skaffold was unable to start as Minikube appears to be paused
	StatusCode_INIT_MINIKUBE_PAUSED_ERROR StatusCode = 902
	// Skaffold was unable to start as Minikube appears to be stopped
	StatusCode_INIT_MINIKUBE_NOT_RUNNING_ERROR StatusCode = 903
	// Skaffold was unable to create a configured image builder
	StatusCode_INIT_CREATE_BUILDER_ERROR StatusCode = 904
	// Skaffold was unable to create a configured deployer
	StatusCode_INIT_CREATE_DEPLOYER_ERROR StatusCode = 905
	// Skaffold was unable to create a configured test
	StatusCode_INIT_CREATE_TEST_DEP_ERROR StatusCode = 906
	// Skaffold encountered an error validating the artifact cache
	StatusCode_INIT_CACHE_ERROR StatusCode = 907
	// Skaffold encountered an error when configuring file watching
	StatusCode_INIT_CREATE_WATCH_TRIGGER_ERROR StatusCode = 908
	// Skaffold encountered an error when evaluating artifact dependencies
	StatusCode_INIT_CREATE_ARTIFACT_DEP_ERROR StatusCode = 909
	// Unable to connect to cluster
	StatusCode_DEPLOY_CLUSTER_CONNECTION_ERR StatusCode = 1001
	// Could not retrieve debug helpers.
	StatusCode_DEPLOY_DEBUG_HELPER_RETRIEVE_ERR StatusCode = 1002
	// Deploy clean up error
	StatusCode_DEPLOY_CLEANUP_ERR StatusCode = 1003
	// Unable to apply helm labels.
	StatusCode_DEPLOY_HELM_APPLY_LABELS StatusCode = 1004
	// Deploy error due to user deploy config for helm deployer
	StatusCode_DEPLOY_HELM_USER_ERR StatusCode = 1005
	// Helm error when no build result is found of value  specified in helm `artifactOverrides`
	StatusCode_DEPLOY_NO_MATCHING_BUILD StatusCode = 1006
	// Unable to get helm client version
	StatusCode_DEPLOY_HELM_VERSION_ERR StatusCode = 1007
	// Helm version not supported.
	StatusCode_DEPLOY_HELM_MIN_VERSION_ERR StatusCode = 1008
	// Unable to retrieve kubectl version
	StatusCode_DEPLOY_KUBECTL_VERSION_ERR StatusCode = 1109
	// User specified offline mode for rendering but remote manifests presents.
	StatusCode_DEPLOY_KUBECTL_OFFLINE_MODE_ERR StatusCode = 1010
	// Error waiting for previous version deletion before next version is active.
	StatusCode_DEPLOY_ERR_WAITING_FOR_DELETION StatusCode = 1011
	// Error reading manifests
	StatusCode_DEPLOY_READ_MANIFEST_ERR StatusCode = 1012
	// Error reading remote manifests
	StatusCode_DEPLOY_READ_REMOTE_MANIFEST_ERR StatusCode = 1013
	// Errors listing manifests
	StatusCode_DEPLOY_LIST_MANIFEST_ERR StatusCode = 1014
	// Deploy error due to user deploy config for kubectl deployer
	StatusCode_DEPLOY_KUBECTL_USER_ERR StatusCode = 1015
	// Deploy error due to user deploy config for kustomize deployer
	StatusCode_DEPLOY_KUSTOMIZE_USER_ERR StatusCode = 1016
	// Error replacing a built artifact in the manifests
	StatusCode_DEPLOY_REPLACE_IMAGE_ERR StatusCode = 1017
	// Error transforming a manifest during skaffold debug
	StatusCode_DEPLOY_TRANSFORM_MANIFEST_ERR StatusCode = 1018
	// Error setting user specified additional labels.
	StatusCode_DEPLOY_SET_LABEL_ERR StatusCode = 1019
	// Error writing hydrated kubernetes manifests.
	StatusCode_DEPLOY_MANIFEST_WRITE_ERR StatusCode = 1020
	// Error getting images from a kubernetes manifest.
	StatusCode_DEPLOY_PARSE_MANIFEST_IMAGES_ERR StatusCode = 1021
	// Helm config `createNamespace` not available
	StatusCode_DEPLOY_HELM_CREATE_NS_NOT_AVAILABLE StatusCode = 1022
	// Kubernetes cluster reported an internal system error
	StatusCode_DEPLOY_CLUSTER_INTERNAL_SYSTEM_ERR StatusCode = 1023
	// The Kptfile cannot be created via `kpt live init`.
	StatusCode_DEPLOY_KPTFILE_INIT_ERR StatusCode = 1024
	// Error expanding paths
	StatusCode_TEST_USER_CONFIG_ERR StatusCode = 1101
	// Error running container-structure-test
	StatusCode_TEST_CST_USER_ERR StatusCode = 1102
	// Unable to docker pull image
	StatusCode_TEST_IMG_PULL_ERR StatusCode = 1103
	// Unable to parse test command
	StatusCode_TEST_CUSTOM_CMD_PARSE_ERR StatusCode = 1104
	// Command returned non-zero exit code
	StatusCode_TEST_CUSTOM_CMD_RUN_NON_ZERO_EXIT_ERR StatusCode = 1105
	// command cancelled or timed out
	StatusCode_TEST_CUSTOM_CMD_RUN_TIMEDOUT_ERR StatusCode = 1106
	// command cancelled or timed out
	StatusCode_TEST_CUSTOM_CMD_RUN_CANCELLED_ERR StatusCode = 1107
	// command context error
	StatusCode_TEST_CUSTOM_CMD_RUN_EXECUTION_ERR StatusCode = 1108
	// command exited
	StatusCode_TEST_CUSTOM_CMD_RUN_EXITED_ERR StatusCode = 1110
	// error running cmd
	StatusCode_TEST_CUSTOM_CMD_RUN_ERR StatusCode = 1111
	// Error getting dependencies from command
	StatusCode_TEST_CUSTOM_DEPENDENCIES_CMD_ERR StatusCode = 1112
	// Unmarshalling dependency output error
	StatusCode_TEST_CUSTOM_DEPENDENCIES_UNMARSHALL_ERR StatusCode = 1113
	// Error retrieving the command
	StatusCode_TEST_CUSTOM_CMD_RETRIEVE_ERR StatusCode = 1114
	// Render errors
	// The Kptfile cannot be created via `kpt pkg init`.
	StatusCode_RENDER_KPTFILE_INIT_ERR StatusCode = 1501
	// The Kptfile is not a valid yaml file
	StatusCode_RENDER_KPTFILE_INVALID_YAML_ERR StatusCode = 1401
	// The Kptfile is not a valid API schema
	StatusCode_RENDER_KPTFILE_INVALID_SCHEMA_ERR StatusCode = 1402
	// Catch-all configuration file parsing error
	StatusCode_CONFIG_FILE_PARSING_ERR StatusCode = 1201
	// Main configuration file not found
	StatusCode_CONFIG_FILE_NOT_FOUND_ERR StatusCode = 1202
	// Dependency configuration file not found
	StatusCode_CONFIG_DEPENDENCY_NOT_FOUND_ERR StatusCode = 1203
	// Duplicate config names in the same configuration file
	StatusCode_CONFIG_DUPLICATE_NAMES_SAME_FILE_ERR StatusCode = 1204
	// Duplicate config names in two configuration files
	StatusCode_CONFIG_DUPLICATE_NAMES_ACROSS_FILES_ERR StatusCode = 1205
	// No configs matching configs filter
	StatusCode_CONFIG_BAD_FILTER_ERR StatusCode = 1206
	// No configs parsed from current file
	StatusCode_CONFIG_ZERO_FOUND_ERR StatusCode = 1207
	// Failed to apply profiles to config
	StatusCode_CONFIG_APPLY_PROFILES_ERR StatusCode = 1208
	// Failed to set default config values
	StatusCode_CONFIG_DEFAULT_VALUES_ERR StatusCode = 1209
	// Failed to substitute absolute file paths in config
	StatusCode_CONFIG_FILE_PATHS_SUBSTITUTION_ERR StatusCode = 1210
	// Same config imported at least twice with different set of profiles
	StatusCode_CONFIG_MULTI_IMPORT_PROFILE_CONFLICT_ERR StatusCode = 1211
	// Profile selection did not match known profile names
	StatusCode_CONFIG_PROFILES_NOT_FOUND_ERR StatusCode = 1212
	// Config API version not found
	StatusCode_CONFIG_UNKNOWN_API_VERSION_ERR StatusCode = 1213
	// The validator is not allowed in skaffold-managed mode.
	StatusCode_CONFIG_UNKNOWN_VALIDATOR StatusCode = 1214
	// The transformer is not allowed in skaffold-managed mode.
	StatusCode_CONFIG_UNKNOWN_TRANSFORMER StatusCode = 1215
	// Manifest file not found
	StatusCode_CONFIG_MISSING_MANIFEST_FILE_ERR StatusCode = 1216
	// Remote config repository cache not found and sync disabled
	StatusCode_CONFIG_REMOTE_REPO_CACHE_NOT_FOUND_ERR StatusCode = 1217
	// Catch-all `skaffold inspect` command error
	StatusCode_INSPECT_UNKNOWN_ERR StatusCode = 1301
	// Trying to add new build environment that already exists
	StatusCode_INSPECT_BUILD_ENV_ALREADY_EXISTS_ERR StatusCode = 1302
	// Trying to modify build environment that doesn't exist
	StatusCode_INSPECT_BUILD_ENV_INCORRECT_TYPE_ERR StatusCode = 1303
	// Trying to modify a profile that doesn't exist
	StatusCode_INSPECT_PROFILE_NOT_FOUND_ERR StatusCode = 1304
)

const (
	// default nil suggestion.
	// This is usually set when no error happens.
	SuggestionCode_NIL SuggestionCode = 0
	// Add Default Repo
	SuggestionCode_ADD_DEFAULT_REPO SuggestionCode = 100
	// Verify Default Repo
	SuggestionCode_CHECK_DEFAULT_REPO SuggestionCode = 101
	// Verify default repo in the global config
	SuggestionCode_CHECK_DEFAULT_REPO_GLOBAL_CONFIG SuggestionCode = 102
	// run gcloud docker auth configure
	SuggestionCode_GCLOUD_DOCKER_AUTH_CONFIGURE SuggestionCode = 103
	// Run docker auth configure
	SuggestionCode_DOCKER_AUTH_CONFIGURE SuggestionCode = 104
	// Verify Gcloud Project
	SuggestionCode_CHECK_GCLOUD_PROJECT SuggestionCode = 105
	// Check if docker is running
	SuggestionCode_CHECK_DOCKER_RUNNING SuggestionCode = 106
	// Fix User Build Error
	SuggestionCode_FIX_USER_BUILD_ERR SuggestionCode = 107
	// Docker build internal error, try again
	SuggestionCode_DOCKER_BUILD_RETRY SuggestionCode = 108
	// Fix `cacheFrom` config for given artifact and try again
	SuggestionCode_FIX_CACHE_FROM_ARTIFACT_CONFIG SuggestionCode = 109
	// Fix `dockerfile` config for a given artifact and try again.
	SuggestionCode_FIX_SKAFFOLD_CONFIG_DOCKERFILE SuggestionCode = 110
	// Use a supported Jib plugin type
	SuggestionCode_FIX_JIB_PLUGIN_CONFIGURATION SuggestionCode = 111
	// Docker build network invalid docker container name (or id).
	SuggestionCode_FIX_DOCKER_NETWORK_CONTAINER_NAME SuggestionCode = 112
	// Docker build network container not existing in the current context.
	SuggestionCode_CHECK_DOCKER_NETWORK_CONTAINER_RUNNING SuggestionCode = 113
	// Executing extractContainerNameFromNetworkMode with a non valid mode (only container mode allowed)
	SuggestionCode_FIX_DOCKER_NETWORK_MODE_WHEN_EXTRACTING_CONTAINER_NAME SuggestionCode = 114
	// Prune Docker image
	SuggestionCode_RUN_DOCKER_PRUNE SuggestionCode = 115
	// Set Cleanup flag for skaffold command.
	SuggestionCode_SET_CLEANUP_FLAG SuggestionCode = 116
	// Build platform error suggestion codes
	SuggestionCode_BUILD_FIX_UNKNOWN_PLATFORM_FLAG SuggestionCode = 117
	// Check cluster connection
	SuggestionCode_CHECK_CLUSTER_CONNECTION SuggestionCode = 201
	// Check minikube status
	SuggestionCode_CHECK_MINIKUBE_STATUS SuggestionCode = 202
	// Install helm tool
	SuggestionCode_INSTALL_HELM SuggestionCode = 203
	// Upgrade helm tool
	SuggestionCode_UPGRADE_HELM SuggestionCode = 204
	// Fix helm `releases.artifactOverrides` config to match with `build.artiofacts`
	SuggestionCode_FIX_SKAFFOLD_CONFIG_HELM_ARTIFACT_OVERRIDES SuggestionCode = 205
	// Upgrade helm version to v3.2.0 and higher.
	SuggestionCode_UPGRADE_HELM32 SuggestionCode = 206
	// Set `releases.createNamespace` to false.
	SuggestionCode_FIX_SKAFFOLD_CONFIG_HELM_CREATE_NAMESPACE SuggestionCode = 207
	// Install kubectl tool
	SuggestionCode_INSTALL_KUBECTL SuggestionCode = 220
	// Container run error
	SuggestionCode_CHECK_CONTAINER_LOGS SuggestionCode = 301
	// Pod Health check error
	SuggestionCode_CHECK_READINESS_PROBE SuggestionCode = 302
	// Check Container image
	SuggestionCode_CHECK_CONTAINER_IMAGE SuggestionCode = 303
	// Node pressure error
	SuggestionCode_ADDRESS_NODE_MEMORY_PRESSURE SuggestionCode = 400
	// Node disk pressure error
	SuggestionCode_ADDRESS_NODE_DISK_PRESSURE SuggestionCode = 401
	// Node network unavailable error
	SuggestionCode_ADDRESS_NODE_NETWORK_UNAVAILABLE SuggestionCode = 402
	// Node PID pressure error
	SuggestionCode_ADDRESS_NODE_PID_PRESSURE SuggestionCode = 403
	// Node unschedulable error
	SuggestionCode_ADDRESS_NODE_UNSCHEDULABLE SuggestionCode = 404
	// Node unreachable error
	SuggestionCode_ADDRESS_NODE_UNREACHABLE SuggestionCode = 405
	// Node not ready error
	SuggestionCode_ADDRESS_NODE_NOT_READY SuggestionCode = 406
	// Scheduler failure error
	SuggestionCode_ADDRESS_FAILED_SCHEDULING SuggestionCode = 407
	// Cluster Connectivity error
	SuggestionCode_CHECK_HOST_CONNECTION SuggestionCode = 408
	// Minikube is stopped: use `minikube start`
	SuggestionCode_START_MINIKUBE SuggestionCode = 501
	// Minikube is paused: use `minikube unpause`
	SuggestionCode_UNPAUSE_MINIKUBE SuggestionCode = 502
	// Run Docker pull for the image with v1 manifest and try again.
	SuggestionCode_RUN_DOCKER_PULL SuggestionCode = 551
	// Rerun with correct offline flag value.
	SuggestionCode_SET_RENDER_FLAG_OFFLINE_FALSE SuggestionCode = 600
	// Manually run `kpt pkg init` or `kpt live init`
	SuggestionCode_KPTFILE_MANUAL_INIT SuggestionCode = 601
	// Check if the Kptfile is correct.
	SuggestionCode_KPTFILE_CHECK_YAML SuggestionCode = 602
	// Check configuration file path
	SuggestionCode_CONFIG_CHECK_FILE_PATH SuggestionCode = 700
	// Check dependency config definition
	SuggestionCode_CONFIG_CHECK_DEPENDENCY_DEFINITION SuggestionCode = 701
	// Change config name to avoid duplicates
	SuggestionCode_CONFIG_CHANGE_NAMES SuggestionCode = 702
	// Check config filter
	SuggestionCode_CONFIG_CHECK_FILTER SuggestionCode = 703
	// Check profile definition in current config
	SuggestionCode_CONFIG_CHECK_PROFILE_DEFINITION SuggestionCode = 704
	// Check active profile selection for dependency config
	SuggestionCode_CONFIG_CHECK_DEPENDENCY_PROFILES_SELECTION SuggestionCode = 705
	// Check profile selection flag
	SuggestionCode_CONFIG_CHECK_PROFILE_SELECTION SuggestionCode = 706
	// Fix config API version or upgrade the skaffold binary
	SuggestionCode_CONFIG_FIX_API_VERSION SuggestionCode = 707
	// Only the allow listed validators are acceptable in skaffold-managed mode.
	SuggestionCode_CONFIG_ALLOWLIST_VALIDATORS SuggestionCode = 708
	// Only the allow listed transformers are acceptable in skaffold-managed mode.
	SuggestionCode_CONFIG_ALLOWLIST_transformers SuggestionCode = 709
	// Check mising manifest file section of config and fix as needed.
	SuggestionCode_CONFIG_FIX_MISSING_MANIFEST_FILE SuggestionCode = 710
	// Enable remote repo sync, or clone manually
	SuggestionCode_CONFIG_ENABLE_REMOTE_REPO_SYNC SuggestionCode = 711
	// Create new build env in a profile instead, or use the 'modify' command
	SuggestionCode_INSPECT_USE_MODIFY_OR_NEW_PROFILE SuggestionCode = 800
	// Check profile selection, or use the 'add' command instead
	SuggestionCode_INSPECT_USE_ADD_BUILD_ENV SuggestionCode = 801
	// Check profile flag value
	SuggestionCode_INSPECT_CHECK_INPUT_PROFILE SuggestionCode = 802
	// Open an issue so this situation can be diagnosed
	SuggestionCode_OPEN_ISSUE SuggestionCode = 900
	// Test error suggestion codes
	SuggestionCode_CHECK_CUSTOM_COMMAND                    SuggestionCode = 1000
	SuggestionCode_FIX_CUSTOM_COMMAND_TIMEOUT              SuggestionCode = 1001
	SuggestionCode_CHECK_CUSTOM_COMMAND_DEPENDENCIES_CMD   SuggestionCode = 1002
	SuggestionCode_CHECK_CUSTOM_COMMAND_DEPENDENCIES_PATHS SuggestionCode = 1003
	SuggestionCode_CHECK_TEST_COMMAND_AND_IMAGE_NAME       SuggestionCode = 1004
)

const (
	// Could not determine Test Type
	TesterType_UNKNOWN_TEST_TYPE TesterType = 0
	// Unit tests
	TesterType_UNIT TesterType = 1
	// Container Structure tests
	TesterType_CONTAINER_STRUCTURE_TEST TesterType = 2
)