modbus_exporter

Modbus exporter

Prometheus exporter which retrieves stats from a modbus tcp system and exports them via HTTP for Prometheus consumption.

Note right of Prometheus: prometheus.yml \n --- \n target: Modbus-TCP-10.0.0.5 \n sub_target: Modbus-Unit-10 \n module: VendorXY
Prometheus->Exporter: http://xxx.de/modbus?target=10.0.0.5&sub_target=10&module=vendorxy
Note right of Exporter: modbus.yml \n --- \n module: VendorXY \n - temperature_a: 400001 \n - temperature_b: 400002

Exporter->Modbus_TCP_10.0.0.5: tcp://10.0.0.5?unit=10&register=400001
Modbus_TCP_10.0.0.5->Modbus_RTU_10: rtu://_?register=400001
Modbus_RTU_10-->Modbus_TCP_10.0.0.5: value=20
Modbus_TCP_10.0.0.5-->Exporter: value=20

Exporter->Modbus_TCP_10.0.0.5: tcp://10.0.0.5?unit=10&register=400002
Modbus_TCP_10.0.0.5->Modbus_RTU_10: rtu://_?register=400002
Modbus_RTU_10-->Modbus_TCP_10.0.0.5: value=19
Modbus_TCP_10.0.0.5-->Exporter: value=19

Exporter-->Prometheus:temperature_a{module="VendorXY",sub_target="10"} 20 \ntemperature_b{module="VendorXY",sub_target="10"} 19

Building

make build

Getting Started

The modbus exporter needs to be passed target (including port), module and sub_module as parameters by Prometheus, this can be done with relabelling (see prometheus.yml).

Once Prometheus is properly configured, run the exporter via:

./modbus_exporter [flags]

Supported flags:

usage: modbus_exporter [<flags>]


Flags:
  -h, --[no-]help                Show context-sensitive help (also try
                                 --help-long and --help-man).
      --config.file="modbus.yml"  
                                 Sets the configuration file.
      --[no-]web.systemd-socket  Use systemd socket activation listeners instead
                                 of port listeners (Linux only).
      --web.listen-address=:9602 ...  
                                 Addresses on which to expose metrics and web
                                 interface. Repeatable for multiple addresses.
      --web.config.file=""       [EXPERIMENTAL] Path to configuration file that
                                 can enable TLS or authentication.
      --log.level=info           Only log messages with the given severity or
                                 above. One of: [debug, info, warn, error]
      --log.format=logfmt        Output format of log messages. One of: [logfmt,
                                 json]
      --[no-]version             Show application version.

Visit http://localhost:9602/modbus?target=1.2.3.4:502&module=fake&sub_target=1 where 1.2.3.4:502 is the IP and port number of the modbus IP device to get metrics from, while module and sub_target parameters specify which module and subtarget to use from the config file. If your device doesn't use sub-targets you can usually just set it to 1.

Visit http://localhost:9602/metrics to get the metrics of the exporter itself.

Configuration File

Check out modbus.yml for more details on the configuration file format.

TODO

• Rework logging.

• Revisit bit parsing.

• Print name, version, ... on exporter startup.

Misc info

ModBus RTU

Support for serial ModBus (RTU) was dropped in git commit d06573828793094fd2bdf3e7c5d072e7a4fd381b. Please send a PR if you need it again. For now, we suggest using a ModBus PLC/bridge/master to bridge from RTU into TCP.

Software provenance

This is forked from https://github.com/lupoDharkael/modbus_exporter which was not maintained any more and did not follow Prometheus best practices. Initially, development happened in https://github.com/mxinden/modbus_exporter which has now been retired in favour of https://github.com/RichiH/modbus_exporter .