go-api-bindings: github.com/Tinkerforge/go-api-bindings/industrial_digital_in_4_bricklet Index | Files

package industrial_digital_in_4_bricklet

import "github.com/Tinkerforge/go-api-bindings/industrial_digital_in_4_bricklet"

4 galvanically isolated digital inputs.

See also the documentation here: https://www.tinkerforge.com/en/doc/Software/Bricklets/IndustrialDigitalIn4_Bricklet_Go.html.

Index

Package Files

industrial_digital_in_4_bricklet.go

Constants

const DeviceDisplayName = "Industrial Digital In 4 Bricklet"
const DeviceIdentifier = 223

type EdgeType Uses

type EdgeType = uint8
const (
    EdgeTypeRising  EdgeType = 0
    EdgeTypeFalling EdgeType = 1
    EdgeTypeBoth    EdgeType = 2
)

type Function Uses

type Function = uint8
const (
    FunctionGetValue             Function = 1
    FunctionSetGroup             Function = 2
    FunctionGetGroup             Function = 3
    FunctionGetAvailableForGroup Function = 4
    FunctionSetDebouncePeriod    Function = 5
    FunctionGetDebouncePeriod    Function = 6
    FunctionSetInterrupt         Function = 7
    FunctionGetInterrupt         Function = 8
    FunctionGetEdgeCount         Function = 10
    FunctionSetEdgeCountConfig   Function = 11
    FunctionGetEdgeCountConfig   Function = 12
    FunctionGetIdentity          Function = 255
    FunctionCallbackInterrupt    Function = 9
)

type IndustrialDigitalIn4Bricklet Uses

type IndustrialDigitalIn4Bricklet struct {
    // contains filtered or unexported fields
}

func New Uses

func New(uid string, ipcon *ipconnection.IPConnection) (IndustrialDigitalIn4Bricklet, error)

Creates an object with the unique device ID `uid`. This object can then be used after the IP Connection `ipcon` is connected.

func (*IndustrialDigitalIn4Bricklet) DeregisterInterruptCallback Uses

func (device *IndustrialDigitalIn4Bricklet) DeregisterInterruptCallback(registrationId uint64)

Remove a registered Interrupt callback.

func (*IndustrialDigitalIn4Bricklet) GetAPIVersion Uses

func (device *IndustrialDigitalIn4Bricklet) GetAPIVersion() [3]uint8

Returns the version of the API definition (major, minor, revision) implemented by this API bindings. This is neither the release version of this API bindings nor does it tell you anything about the represented Brick or Bricklet.

func (*IndustrialDigitalIn4Bricklet) GetAvailableForGroup Uses

func (device *IndustrialDigitalIn4Bricklet) GetAvailableForGroup() (available uint8, err error)

Returns a bitmask of ports that are available for grouping. For example the value 5 or 0b0101 means: Port A and port C are connected to Bricklets that can be grouped together.

func (*IndustrialDigitalIn4Bricklet) GetDebouncePeriod Uses

func (device *IndustrialDigitalIn4Bricklet) GetDebouncePeriod() (debounce uint32, err error)

Returns the debounce period as set by SetDebouncePeriod.

func (*IndustrialDigitalIn4Bricklet) GetEdgeCount Uses

func (device *IndustrialDigitalIn4Bricklet) GetEdgeCount(pin uint8, resetCounter bool) (count uint32, err error)

Returns the current value of the edge counter for the selected pin. You can configure the edges that are counted with SetEdgeCountConfig.

If you set the reset counter to *true*, the count is set back to 0 directly after it is read.

The edge counters use the grouping as set by SetGroup.

.. versionadded:: 2.0.1$nbsp;(Plugin)

func (*IndustrialDigitalIn4Bricklet) GetEdgeCountConfig Uses

func (device *IndustrialDigitalIn4Bricklet) GetEdgeCountConfig(pin uint8) (edgeType EdgeType, debounce uint8, err error)

Returns the edge type and debounce time for the selected pin as set by SetEdgeCountConfig.

.. versionadded:: 2.0.1$nbsp;(Plugin)

Associated constants:

* EdgeTypeRising
* EdgeTypeFalling
* EdgeTypeBoth

func (*IndustrialDigitalIn4Bricklet) GetGroup Uses

func (device *IndustrialDigitalIn4Bricklet) GetGroup() (group [4]rune, err error)

Returns the group as set by SetGroup

func (*IndustrialDigitalIn4Bricklet) GetIdentity Uses

func (device *IndustrialDigitalIn4Bricklet) GetIdentity() (uid string, connectedUid string, position rune, hardwareVersion [3]uint8, firmwareVersion [3]uint8, deviceIdentifier uint16, err error)

Returns the UID, the UID where the Bricklet is connected to, the position, the hardware and firmware version as well as the device identifier.

The position can be 'a', 'b', 'c', 'd', 'e', 'f', 'g' or 'h' (Bricklet Port). The Raspberry Pi HAT (Zero) Brick is always at position 'i' and the Bricklet connected to an `Isolator Bricklet <isolator_bricklet>` is always as position 'z'.

The device identifier numbers can be found `here <device_identifier>`. |device_identifier_constant|

func (*IndustrialDigitalIn4Bricklet) GetInterrupt Uses

func (device *IndustrialDigitalIn4Bricklet) GetInterrupt() (interruptMask uint16, err error)

Returns the interrupt bitmask as set by SetInterrupt.

func (*IndustrialDigitalIn4Bricklet) GetResponseExpected Uses

func (device *IndustrialDigitalIn4Bricklet) GetResponseExpected(functionID Function) (bool, error)

Returns the response expected flag for the function specified by the function ID parameter. It is true if the function is expected to send a response, false otherwise.

For getter functions this is enabled by default and cannot be disabled, because those functions will always send a response. For callback configuration functions it is enabled by default too, but can be disabled by SetResponseExpected. For setter functions it is disabled by default and can be enabled.

Enabling the response expected flag for a setter function allows to detect timeouts and other error conditions calls of this setter as well. The device will then send a response for this purpose. If this flag is disabled for a setter function then no response is sent and errors are silently ignored, because they cannot be detected.

See SetResponseExpected for the list of function ID constants available for this function.

func (*IndustrialDigitalIn4Bricklet) GetValue Uses

func (device *IndustrialDigitalIn4Bricklet) GetValue() (valueMask uint16, err error)

Returns the input value with a bitmask. The bitmask is 16bit long, *true* refers to high and *false* refers to low.

For example: The value 3 or 0b0011 means that pins 0-1 are high and the other pins are low.

If no groups are used (see SetGroup), the pins correspond to the markings on the IndustrialDigital In 4 Bricklet.

If groups are used, the pins correspond to the element in the group. Element 1 in the group will get pins 0-3, element 2 pins 4-7, element 3 pins 8-11 and element 4 pins 12-15.

func (*IndustrialDigitalIn4Bricklet) RegisterInterruptCallback Uses

func (device *IndustrialDigitalIn4Bricklet) RegisterInterruptCallback(fn func(uint16, uint16)) uint64

This callback is triggered whenever a change of the voltage level is detected on pins where the interrupt was activated with SetInterrupt.

The values are a bitmask that specifies which interrupts occurred and the current value bitmask.

For example:

* (1, 1) or (0b0001, 0b0001) means that an interrupt on pin 0 occurred and

currently pin 0 is high and pins 1-3 are low.

* (9, 14) or (0b1001, 0b1110) means that interrupts on pins 0 and 3

occurred and currently pin 0 is low and pins 1-3 are high.

The interrupts use the grouping as set by SetGroup.

func (*IndustrialDigitalIn4Bricklet) SetDebouncePeriod Uses

func (device *IndustrialDigitalIn4Bricklet) SetDebouncePeriod(debounce uint32) (err error)

Sets the debounce period of the RegisterInterruptCallback callback.

For example: If you set this value to 100, you will get the interrupt maximal every 100ms. This is necessary if something that bounces is connected to the Digital In 4 Bricklet, such as a button.

func (*IndustrialDigitalIn4Bricklet) SetEdgeCountConfig Uses

func (device *IndustrialDigitalIn4Bricklet) SetEdgeCountConfig(selectionMask uint16, edgeType EdgeType, debounce uint8) (err error)

Configures the edge counter for the selected pins. A bitmask of 9 or 0b1001 will enable the edge counter for pins 0 and 3.

The edge type parameter configures if rising edges, falling edges or both are counted if the pin is configured for input. Possible edge types are:

* 0 = rising * 1 = falling * 2 = both

Configuring an edge counter resets its value to 0.

If you don't know what any of this means, just leave it at default. The default configuration is very likely OK for you.

The edge counters use the grouping as set by SetGroup.

.. versionadded:: 2.0.1$nbsp;(Plugin)

Associated constants:

* EdgeTypeRising
* EdgeTypeFalling
* EdgeTypeBoth

func (*IndustrialDigitalIn4Bricklet) SetGroup Uses

func (device *IndustrialDigitalIn4Bricklet) SetGroup(group [4]rune) (err error)

Sets a group of Digital In 4 Bricklets that should work together. You can find Bricklets that can be grouped together with GetAvailableForGroup.

The group consists of 4 elements. Element 1 in the group will get pins 0-3, element 2 pins 4-7, element 3 pins 8-11 and element 4 pins 12-15.

Each element can either be one of the ports ('a' to 'd') or 'n' if it should not be used.

For example: If you have two Digital In 4 Bricklets connected to port A and port B respectively, you could call with “['a', 'b', 'n', 'n']“.

Now the pins on the Digital In 4 on port A are assigned to 0-3 and the pins on the Digital In 4 on port B are assigned to 4-7. It is now possible to call GetValue and read out two Bricklets at the same time.

Changing the group configuration resets all edge counter configurations and values.

func (*IndustrialDigitalIn4Bricklet) SetInterrupt Uses

func (device *IndustrialDigitalIn4Bricklet) SetInterrupt(interruptMask uint16) (err error)

Sets the pins on which an interrupt is activated with a bitmask. Interrupts are triggered on changes of the voltage level of the pin, i.e. changes from high to low and low to high.

For example: An interrupt bitmask of 9 or 0b1001 will enable the interrupt for pins 0 and 3.

The interrupts use the grouping as set by SetGroup.

The interrupt is delivered with the RegisterInterruptCallback callback.

func (*IndustrialDigitalIn4Bricklet) SetResponseExpected Uses

func (device *IndustrialDigitalIn4Bricklet) SetResponseExpected(functionID Function, responseExpected bool) error

Changes the response expected flag of the function specified by the function ID parameter. This flag can only be changed for setter (default value: false) and callback configuration functions (default value: true). For getter functions it is always enabled.

Enabling the response expected flag for a setter function allows to detect timeouts and other error conditions calls of this setter as well. The device will then send a response for this purpose. If this flag is disabled for a setter function then no response is sent and errors are silently ignored, because they cannot be detected.

func (*IndustrialDigitalIn4Bricklet) SetResponseExpectedAll Uses

func (device *IndustrialDigitalIn4Bricklet) SetResponseExpectedAll(responseExpected bool)

Changes the response expected flag for all setter and callback configuration functions of this device at once.

Package industrial_digital_in_4_bricklet imports 5 packages (graph). Updated 2020-05-26. Refresh now. Tools for package owners.