buildbucketpb

type Acl struct {
	// Role denotes a list of actions that an identity can perform.
	Role Acl_Role `protobuf:"varint,1,opt,name=role,proto3,enum=buildbucket.Acl_Role" json:"role,omitempty"`
	// Name of the group defined in the auth service.
	Group string `protobuf:"bytes,2,opt,name=group,proto3" json:"group,omitempty"`
	// An email address or a full identity string "kind:name". See auth service
	// on kinds of identities. Anonymous users are "anonymous:anonymous".
	// Either identity or group must be present, not both.
	Identity             string   `protobuf:"bytes,3,opt,name=identity,proto3" json:"identity,omitempty"`
	XXX_NoUnkeyedLiteral struct{} `json:"-"`
	XXX_unrecognized     []byte   `json:"-"`
	XXX_sizecache        int32    `json:"-"`
}

type AclSet struct {
	// A name of the ACL set. Required. Must match regex '^[a-z0-9_]+$'.
	Name string `protobuf:"bytes,1,opt,name=name,proto3" json:"name,omitempty"`
	// List of access control rules.
	// The order does not matter.
	Acls                 []*Acl   `protobuf:"bytes,2,rep,name=acls,proto3" json:"acls,omitempty"`
	XXX_NoUnkeyedLiteral struct{} `json:"-"`
	XXX_unrecognized     []byte   `json:"-"`
	XXX_sizecache        int32    `json:"-"`
}

type Acl_Role int32

type BatchRequest struct {
	// Requests to execute in a single batch.
	//
	// All requests are executed in their own individual transactions.
	// BatchRequest as a whole is not transactional.
	// Mutations are executed before read-only requests.
	Requests             []*BatchRequest_Request `protobuf:"bytes,1,rep,name=requests,proto3" json:"requests,omitempty"`
	XXX_NoUnkeyedLiteral struct{}                `json:"-"`
	XXX_unrecognized     []byte                  `json:"-"`
	XXX_sizecache        int32                   `json:"-"`
}

type BatchRequest_Request struct {
	// Types that are valid to be assigned to Request:
	//	*BatchRequest_Request_GetBuild
	//	*BatchRequest_Request_SearchBuilds
	//	*BatchRequest_Request_ScheduleBuild
	//	*BatchRequest_Request_CancelBuild
	Request              isBatchRequest_Request_Request `protobuf_oneof:"request"`
	XXX_NoUnkeyedLiteral struct{}                       `json:"-"`
	XXX_unrecognized     []byte                         `json:"-"`
	XXX_sizecache        int32                          `json:"-"`
}

type BatchRequest_Request_CancelBuild struct {
	CancelBuild *CancelBuildRequest `protobuf:"bytes,4,opt,name=cancel_build,json=cancelBuild,proto3,oneof"`
}

type BatchRequest_Request_GetBuild struct {
	GetBuild *GetBuildRequest `protobuf:"bytes,1,opt,name=get_build,json=getBuild,proto3,oneof"`
}

type BatchRequest_Request_ScheduleBuild struct {
	ScheduleBuild *ScheduleBuildRequest `protobuf:"bytes,3,opt,name=schedule_build,json=scheduleBuild,proto3,oneof"`
}

type BatchRequest_Request_SearchBuilds struct {
	SearchBuilds *SearchBuildsRequest `protobuf:"bytes,2,opt,name=search_builds,json=searchBuilds,proto3,oneof"`
}

type BatchResponse struct {
	// Responses in the same order as BatchRequest.requests.
	Responses            []*BatchResponse_Response `protobuf:"bytes,1,rep,name=responses,proto3" json:"responses,omitempty"`
	XXX_NoUnkeyedLiteral struct{}                  `json:"-"`
	XXX_unrecognized     []byte                    `json:"-"`
	XXX_sizecache        int32                     `json:"-"`
}

type BatchResponse_Response struct {
	// Types that are valid to be assigned to Response:
	//	*BatchResponse_Response_GetBuild
	//	*BatchResponse_Response_SearchBuilds
	//	*BatchResponse_Response_ScheduleBuild
	//	*BatchResponse_Response_CancelBuild
	//	*BatchResponse_Response_Error
	Response             isBatchResponse_Response_Response `protobuf_oneof:"response"`
	XXX_NoUnkeyedLiteral struct{}                          `json:"-"`
	XXX_unrecognized     []byte                            `json:"-"`
	XXX_sizecache        int32                             `json:"-"`
}

type BatchResponse_Response_CancelBuild struct {
	CancelBuild *Build `protobuf:"bytes,4,opt,name=cancel_build,json=cancelBuild,proto3,oneof"`
}

type BatchResponse_Response_Error struct {
	Error *status.Status `protobuf:"bytes,100,opt,name=error,proto3,oneof"`
}

type BatchResponse_Response_GetBuild struct {
	GetBuild *Build `protobuf:"bytes,1,opt,name=get_build,json=getBuild,proto3,oneof"`
}

type BatchResponse_Response_ScheduleBuild struct {
	ScheduleBuild *Build `protobuf:"bytes,3,opt,name=schedule_build,json=scheduleBuild,proto3,oneof"`
}

type BatchResponse_Response_SearchBuilds struct {
	SearchBuilds *SearchBuildsResponse `protobuf:"bytes,2,opt,name=search_builds,json=searchBuilds,proto3,oneof"`
}

type Bucket struct {
	// Name of the bucket. Names are unique within one instance of buildbucket.
	// If another project already uses this name, a config will be rejected.
	// Name reservation is first-come first-serve.
	Name string `protobuf:"bytes,1,opt,name=name,proto3" json:"name,omitempty"`
	// List of access control rules for the bucket.
	// The order does not matter.
	Acls []*Acl `protobuf:"bytes,2,rep,name=acls,proto3" json:"acls,omitempty"`
	// A list of ACL set names. Each ACL in each referenced ACL set will be
	// included in this bucket.
	// The order does not matter.
	AclSets []string `protobuf:"bytes,4,rep,name=acl_sets,json=aclSets,proto3" json:"acl_sets,omitempty"`
	// Buildbucket-swarming integration.
	Swarming             *Swarming `protobuf:"bytes,3,opt,name=swarming,proto3" json:"swarming,omitempty"`
	XXX_NoUnkeyedLiteral struct{}  `json:"-"`
	XXX_unrecognized     []byte    `json:"-"`
	XXX_sizecache        int32     `json:"-"`
}

type Build struct {
	// Identifier of the build, unique per LUCI deployment.
	// IDs are monotonically decreasing.
	Id int64 `protobuf:"varint,1,opt,name=id,proto3" json:"id,omitempty"`
	// Required. The builder this build belongs to.
	//
	// Tuple (builder.project, builder.bucket) defines build ACL
	// which may change after build has ended.
	Builder *BuilderID `protobuf:"bytes,2,opt,name=builder,proto3" json:"builder,omitempty"`
	// Human-readable identifier of the build with the following properties:
	// - unique within the builder
	// - a monotonically increasing number
	// - mostly contiguous
	// - much shorter than id
	//
	// Caution: populated (positive number) iff build numbers were enabled
	// in the builder configuration at the time of build creation.
	//
	// Caution: Build numbers are not guaranteed to be contiguous.
	// There may be gaps during outages.
	//
	// Caution: Build numbers, while monotonically increasing, do not
	// necessarily reflect source-code order. For example, force builds
	// or rebuilds can allocate new, higher, numbers, but build an older-
	// than-HEAD version of the source.
	Number int32 `protobuf:"varint,3,opt,name=number,proto3" json:"number,omitempty"`
	// Verified LUCI identity that created this build.
	CreatedBy string `protobuf:"bytes,4,opt,name=created_by,json=createdBy,proto3" json:"created_by,omitempty"`
	// Verified LUCI identity that canceled this build.
	CanceledBy string `protobuf:"bytes,23,opt,name=canceled_by,json=canceledBy,proto3" json:"canceled_by,omitempty"`
	// When the build was created.
	CreateTime *timestamp.Timestamp `protobuf:"bytes,6,opt,name=create_time,json=createTime,proto3" json:"create_time,omitempty"`
	// When the build started.
	// Required iff status is STARTED, SUCCESS or FAILURE.
	StartTime *timestamp.Timestamp `protobuf:"bytes,7,opt,name=start_time,json=startTime,proto3" json:"start_time,omitempty"`
	// When the build ended.
	// Present iff status is terminal.
	// MUST NOT be before start_time.
	EndTime *timestamp.Timestamp `protobuf:"bytes,8,opt,name=end_time,json=endTime,proto3" json:"end_time,omitempty"`
	// When the build was most recently updated.
	//
	// RPC: can be > end_time if, e.g. new tags were attached to a completed
	// build.
	UpdateTime *timestamp.Timestamp `protobuf:"bytes,9,opt,name=update_time,json=updateTime,proto3" json:"update_time,omitempty"`
	// Status of the build.
	// Must be specified, i.e. not STATUS_UNSPECIFIED.
	//
	// RPC: Responses have most current status.
	//
	// BigQuery: Final status of the build. Cannot be SCHEDULED or STARTED.
	Status Status `protobuf:"varint,12,opt,name=status,proto3,enum=buildbucket.v2.Status" json:"status,omitempty"`
	// Human-readable summary of the build in Markdown format
	// (https://spec.commonmark.org/0.28/).
	// Explains status.
	// Up to 4 KB.
	//
	// BigQuery: excluded from rows.
	SummaryMarkdown string `protobuf:"bytes,20,opt,name=summary_markdown,json=summaryMarkdown,proto3" json:"summary_markdown,omitempty"`
	// If NO, then the build status SHOULD NOT be used to assess correctness of
	// the input gitiles_commit or gerrit_changes.
	// For example, if a pre-submit build has failed, CQ MAY still land the CL.
	// For example, if a post-submit build has failed, CLs MAY continue landing.
	Critical Trinary `protobuf:"varint,21,opt,name=critical,proto3,enum=buildbucket.v2.Trinary" json:"critical,omitempty"`
	// Machine-readable details of the current status.
	// Human-readable status reason is available in summary_markdown.
	StatusDetails *StatusDetails `protobuf:"bytes,22,opt,name=status_details,json=statusDetails,proto3" json:"status_details,omitempty"`
	// Input to the build executable.
	Input *Build_Input `protobuf:"bytes,15,opt,name=input,proto3" json:"input,omitempty"`
	// Output of the build executable.
	// SHOULD depend only on input field and NOT other fields.
	// MUST be unset if build status is SCHEDULED.
	//
	// RPC: By default, this field is excluded from responses.
	// Updated while the build is running and finalized when the build ends.
	Output *Build_Output `protobuf:"bytes,16,opt,name=output,proto3" json:"output,omitempty"`
	// Current list of build steps.
	// Updated as build runs.
	//
	// May take up to 1MB after zlib compression.
	// MUST be unset if build status is SCHEDULED.
	//
	// RPC: By default, this field is excluded from responses.
	Steps []*Step `protobuf:"bytes,17,rep,name=steps,proto3" json:"steps,omitempty"`
	// Build infrastructure used by the build.
	//
	// RPC: By default, this field is excluded from responses.
	Infra *BuildInfra `protobuf:"bytes,18,opt,name=infra,proto3" json:"infra,omitempty"`
	// Arbitrary annotations for the build.
	// One key may have multiple values, which is why this is not a map<string,string>.
	// Indexed by the server, see also BuildFilter.tags.
	Tags []*StringPair `protobuf:"bytes,19,rep,name=tags,proto3" json:"tags,omitempty"`
	// What to run when the build is ready to start.
	Exe *Executable `protobuf:"bytes,24,opt,name=exe,proto3" json:"exe,omitempty"`
	// If true, use the canary build infrastructure.
	Canary bool `protobuf:"varint,25,opt,name=canary,proto3" json:"canary,omitempty"`
	// Maximum build pending time.
	// If the timeout is reached, the build is marked as INFRA_FAILURE status
	// and both status_details.{timeout, resource_exhaustion} are set.
	SchedulingTimeout *duration.Duration `protobuf:"bytes,26,opt,name=scheduling_timeout,json=schedulingTimeout,proto3" json:"scheduling_timeout,omitempty"`
	// Maximum build execution time.
	// Not to be confused with scheduling_timeout.
	// If the timeout is reached, the build is marked as INFRA_FAILURE status
	// and status_details.timeout is set.
	ExecutionTimeout     *duration.Duration `protobuf:"bytes,27,opt,name=execution_timeout,json=executionTimeout,proto3" json:"execution_timeout,omitempty"`
	XXX_NoUnkeyedLiteral struct{}           `json:"-"`
	XXX_unrecognized     []byte             `json:"-"`
	XXX_sizecache        int32              `json:"-"`
}

type BuildInfra struct {
	Buildbucket          *BuildInfra_Buildbucket `protobuf:"bytes,1,opt,name=buildbucket,proto3" json:"buildbucket,omitempty"`
	Swarming             *BuildInfra_Swarming    `protobuf:"bytes,2,opt,name=swarming,proto3" json:"swarming,omitempty"`
	Logdog               *BuildInfra_LogDog      `protobuf:"bytes,3,opt,name=logdog,proto3" json:"logdog,omitempty"`
	Recipe               *BuildInfra_Recipe      `protobuf:"bytes,4,opt,name=recipe,proto3" json:"recipe,omitempty"`
	XXX_NoUnkeyedLiteral struct{}                `json:"-"`
	XXX_unrecognized     []byte                  `json:"-"`
	XXX_sizecache        int32                   `json:"-"`
}

type BuildInfra_Buildbucket struct {
	// Version of swarming task template. Defines
	// versions of kitchen, git, git wrapper, python, vpython, etc.
	ServiceConfigRevision string `` /* 126-byte string literal not displayed */
	// Properties that were specified in ScheduleBuildRequest to create this
	// build.
	//
	// In particular, CQ uses this to decide whether the build created by
	// someone else is appropriate for CQ, e.g. it was created with the same
	// properties that CQ would use.
	RequestedProperties *_struct.Struct `protobuf:"bytes,5,opt,name=requested_properties,json=requestedProperties,proto3" json:"requested_properties,omitempty"`
	// Dimensions that were specified in ScheduleBuildRequest to create this
	// build.
	RequestedDimensions  []*RequestedDimension `protobuf:"bytes,6,rep,name=requested_dimensions,json=requestedDimensions,proto3" json:"requested_dimensions,omitempty"`
	XXX_NoUnkeyedLiteral struct{}              `json:"-"`
	XXX_unrecognized     []byte                `json:"-"`
	XXX_sizecache        int32                 `json:"-"`
}

type BuildInfra_LogDog struct {
	// LogDog hostname, e.g. "logs.chromium.org".
	Hostname string `protobuf:"bytes,1,opt,name=hostname,proto3" json:"hostname,omitempty"`
	// LogDog project, e.g. "chromium".
	// Typically matches Build.builder.project.
	Project string `protobuf:"bytes,2,opt,name=project,proto3" json:"project,omitempty"`
	// A slash-separated path prefix shared by all logs and artifacts of this
	// build.
	// No other build can have the same prefix.
	// Can be used to discover logs and/or load log contents.
	//
	// Can be used to construct URL of a page that displays stdout/stderr of all
	// steps of a build. In pseudo-JS:
	//   q_stdout = `${project}/${prefix}/+/**/stdout`;
	//   q_stderr = `${project}/${prefix}/+/**/stderr`;
	//   url = `https://${host}/v/?s=${urlquote(q_stdout)}&s=${urlquote(q_stderr)}`;
	Prefix               string   `protobuf:"bytes,3,opt,name=prefix,proto3" json:"prefix,omitempty"`
	XXX_NoUnkeyedLiteral struct{} `json:"-"`
	XXX_unrecognized     []byte   `json:"-"`
	XXX_sizecache        int32    `json:"-"`
}

type BuildInfra_Recipe struct {
	// CIPD package name containing the recipe used to run this build.
	CipdPackage string `protobuf:"bytes,1,opt,name=cipd_package,json=cipdPackage,proto3" json:"cipd_package,omitempty"`
	// Name of the recipe used to run this build.
	Name                 string   `protobuf:"bytes,2,opt,name=name,proto3" json:"name,omitempty"`
	XXX_NoUnkeyedLiteral struct{} `json:"-"`
	XXX_unrecognized     []byte   `json:"-"`
	XXX_sizecache        int32    `json:"-"`
}

type BuildInfra_Swarming struct {
	// Swarming hostname, e.g. "chromium-swarm.appspot.com".
	// Populated at the build creation time.
	Hostname string `protobuf:"bytes,1,opt,name=hostname,proto3" json:"hostname,omitempty"`
	// Swarming task id.
	// Not guaranteed to be populated at the build creation time.
	TaskId string `protobuf:"bytes,2,opt,name=task_id,json=taskId,proto3" json:"task_id,omitempty"`
	// Task service account email address.
	// This is the service account used for all authenticated requests by the
	// build.
	TaskServiceAccount string `protobuf:"bytes,3,opt,name=task_service_account,json=taskServiceAccount,proto3" json:"task_service_account,omitempty"`
	// Priority of the task. The lower the more important.
	// Valid values are [20..255].
	Priority int32 `protobuf:"varint,4,opt,name=priority,proto3" json:"priority,omitempty"`
	// Swarming dimensions for the task.
	TaskDimensions []*RequestedDimension `protobuf:"bytes,5,rep,name=task_dimensions,json=taskDimensions,proto3" json:"task_dimensions,omitempty"`
	// Swarming dimensions of the bot used for the task.
	BotDimensions []*StringPair `protobuf:"bytes,6,rep,name=bot_dimensions,json=botDimensions,proto3" json:"bot_dimensions,omitempty"`
	// Caches requested by this build.
	Caches []*BuildInfra_Swarming_CacheEntry `protobuf:"bytes,7,rep,name=caches,proto3" json:"caches,omitempty"`
	// Swarming task containment for the task.
	Containment          *api.Containment `protobuf:"bytes,8,opt,name=containment,proto3" json:"containment,omitempty"`
	XXX_NoUnkeyedLiteral struct{}         `json:"-"`
	XXX_unrecognized     []byte           `json:"-"`
	XXX_sizecache        int32            `json:"-"`
}

type BuildInfra_Swarming_CacheEntry struct {
	// Identifier of the cache. Required. Length is limited to 128.
	// Must be unique in the build.
	//
	// If the pool of swarming bots is shared among multiple LUCI projects and
	// projects use same cache name, the cache will be shared across projects.
	// To avoid affecting and being affected by other projects, prefix the
	// cache name with something project-specific, e.g. "v8-".
	Name string `protobuf:"bytes,1,opt,name=name,proto3" json:"name,omitempty"`
	// Relative path where the cache in mapped into. Required.
	//
	// Must use POSIX format (forward slashes).
	// In most cases, it does not need slashes at all.
	//
	// In recipes, use api.path['cache'].join(path) to get absolute path.
	//
	// Must be unique in the build.
	Path string `protobuf:"bytes,2,opt,name=path,proto3" json:"path,omitempty"`
	// Duration to wait for a bot with a warm cache to pick up the
	// task, before falling back to a bot with a cold (non-existent) cache.
	//
	// The default is 0, which means that no preference will be chosen for a
	// bot with this or without this cache, and a bot without this cache may
	// be chosen instead.
	//
	// If no bot has this cache warm, the task will skip this wait and will
	// immediately fallback to a cold cache request.
	//
	// The value must be multiples of 60 seconds.
	WaitForWarmCache *duration.Duration `protobuf:"bytes,3,opt,name=wait_for_warm_cache,json=waitForWarmCache,proto3" json:"wait_for_warm_cache,omitempty"`
	// Environment variable with this name will be set to the path to the cache
	// directory.
	EnvVar               string   `protobuf:"bytes,4,opt,name=env_var,json=envVar,proto3" json:"env_var,omitempty"`
	XXX_NoUnkeyedLiteral struct{} `json:"-"`
	XXX_unrecognized     []byte   `json:"-"`
	XXX_sizecache        int32    `json:"-"`
}

type BuildPredicate struct {
	// A build must be in this builder.
	Builder *BuilderID `protobuf:"bytes,1,opt,name=builder,proto3" json:"builder,omitempty"`
	// A build must have this status.
	Status Status `protobuf:"varint,2,opt,name=status,proto3,enum=buildbucket.v2.Status" json:"status,omitempty"`
	// A build's Build.Input.gerrit_changes must include ALL of these changes.
	GerritChanges []*GerritChange `protobuf:"bytes,3,rep,name=gerrit_changes,json=gerritChanges,proto3" json:"gerrit_changes,omitempty"`
	// A build's Build.Output.gitiles_commit must match this commit.
	// One of the following subfield sets must specified:
	// - host, project, id
	// - host, project, ref
	// - host, project, ref, position
	OutputGitilesCommit *GitilesCommit `protobuf:"bytes,4,opt,name=output_gitiles_commit,json=outputGitilesCommit,proto3" json:"output_gitiles_commit,omitempty"`
	// A build must be created by this identity.
	CreatedBy string `protobuf:"bytes,5,opt,name=created_by,json=createdBy,proto3" json:"created_by,omitempty"`
	// A build must have ALL of these tags.
	// For "ANY of these tags" make separate RPCs.
	Tags []*StringPair `protobuf:"bytes,6,rep,name=tags,proto3" json:"tags,omitempty"`
	// A build must have been created within the specified range.
	// Both boundaries are optional.
	CreateTime *TimeRange `protobuf:"bytes,7,opt,name=create_time,json=createTime,proto3" json:"create_time,omitempty"`
	// If false (default), a build must be non-experimental.
	// Otherwise it may be experimental or non-experimental.
	IncludeExperimental bool `protobuf:"varint,8,opt,name=include_experimental,json=includeExperimental,proto3" json:"include_experimental,omitempty"`
	// A build must be in this build range.
	// A pair of SearchBuildsRequest.predicate.build.start_build_id and
	// SearchBuildsRequest.page_size=1 can be used to find the previous build.
	Build *BuildRange `protobuf:"bytes,9,opt,name=build,proto3" json:"build,omitempty"`
	// A build must have a matching value of Build.infra.buildbucket.canary.
	Canary               Trinary  `protobuf:"varint,10,opt,name=canary,proto3,enum=buildbucket.v2.Trinary" json:"canary,omitempty"`
	XXX_NoUnkeyedLiteral struct{} `json:"-"`
	XXX_unrecognized     []byte   `json:"-"`
	XXX_sizecache        int32    `json:"-"`
}

type BuildRange struct {
	// Inclusive lower boundary. Optional.
	StartBuildId int64 `protobuf:"varint,1,opt,name=start_build_id,json=startBuildId,proto3" json:"start_build_id,omitempty"`
	// Exclusive upper boundary. Optional.
	EndBuildId           int64    `protobuf:"varint,2,opt,name=end_build_id,json=endBuildId,proto3" json:"end_build_id,omitempty"`
	XXX_NoUnkeyedLiteral struct{} `json:"-"`
	XXX_unrecognized     []byte   `json:"-"`
	XXX_sizecache        int32    `json:"-"`
}

type BuildSecrets struct {
	// Token to identify RPCs associated with the same build.
	BuildToken           string   `protobuf:"bytes,1,opt,name=build_token,json=buildToken,proto3" json:"build_token,omitempty"`
	XXX_NoUnkeyedLiteral struct{} `json:"-"`
	XXX_unrecognized     []byte   `json:"-"`
	XXX_sizecache        int32    `json:"-"`
}

type Build_Input struct {
	// Arbitrary JSON object. Available at build run time.
	//
	// RPC: By default, this field is excluded from responses.
	//
	// V1 equivalent: corresponds to "properties" key in "parameters_json".
	Properties *_struct.Struct `protobuf:"bytes,1,opt,name=properties,proto3" json:"properties,omitempty"`
	// The Gitiles commit to run against.
	// Usually present in CI builds, set by LUCI Scheduler.
	// If not present, the build may checkout "refs/heads/master".
	// NOT a blamelist.
	//
	// V1 equivalent: supersedes "revision" property and "buildset"
	// tag that starts with "commit/gitiles/".
	GitilesCommit *GitilesCommit `protobuf:"bytes,2,opt,name=gitiles_commit,json=gitilesCommit,proto3" json:"gitiles_commit,omitempty"`
	// Gerrit patchsets to run against.
	// Usually present in tryjobs, set by CQ, Gerrit, git-cl-try.
	// Applied on top of gitiles_commit if specified, otherwise tip of the tree.
	//
	// V1 equivalent: supersedes patch_* properties and "buildset"
	// tag that starts with "patch/gerrit/".
	GerritChanges []*GerritChange `protobuf:"bytes,3,rep,name=gerrit_changes,json=gerritChanges,proto3" json:"gerrit_changes,omitempty"`
	// If true, the build does not affect prod. In recipe land, runtime.is_experimental will
	// return true and recipes should not make prod-visible side effects.
	// By default, experimental builds are not surfaced in RPCs, PubSub
	// notifications (unless it is callback), and reported in metrics / BigQuery tables
	// under a different name.
	// See also include_experimental fields to in request messages.
	Experimental         bool     `protobuf:"varint,5,opt,name=experimental,proto3" json:"experimental,omitempty"`
	XXX_NoUnkeyedLiteral struct{} `json:"-"`
	XXX_unrecognized     []byte   `json:"-"`
	XXX_sizecache        int32    `json:"-"`
}

type Build_Output struct {
	// Arbitrary JSON object produced by the build.
	//
	// In recipes, use step_result.presentation.properties to set these,
	// for example
	//
	//   step_result = api.step(['echo'])
	//   step_result.presentation.properties['foo'] = 'bar'
	//
	// More docs: https://chromium.googlesource.com/infra/luci/recipes-py/+/HEAD/doc/old_user_guide.md#Setting-properties
	//
	// V1 equivalent: corresponds to "properties" key in
	// "result_details_json".
	// In V1 output properties are not populated until build ends.
	Properties *_struct.Struct `protobuf:"bytes,1,opt,name=properties,proto3" json:"properties,omitempty"`
	// Build checked out and executed on this commit.
	//
	// Should correspond to Build.Input.gitiles_commit.
	// May be present even if Build.Input.gitiles_commit is not set, for example
	// in cron builders.
	//
	// V1 equivalent: this supersedes all got_revision output property.
	GitilesCommit        *GitilesCommit `protobuf:"bytes,3,opt,name=gitiles_commit,json=gitilesCommit,proto3" json:"gitiles_commit,omitempty"`
	XXX_NoUnkeyedLiteral struct{}       `json:"-"`
	XXX_unrecognized     []byte         `json:"-"`
	XXX_sizecache        int32          `json:"-"`
}

type BuildbucketCfg struct {
	// All buckets defined for this project.
	Buckets []*Bucket `protobuf:"bytes,1,rep,name=buckets,proto3" json:"buckets,omitempty"`
	// A list of ACL sets. Names must be unique.
	AclSets []*AclSet `protobuf:"bytes,2,rep,name=acl_sets,json=aclSets,proto3" json:"acl_sets,omitempty"`
	// A list of builder mixin definitions.
	// A mixin can be referenced in any builder defined within the BuildbucketCfg.
	// See also Buider.mixins field.
	BuilderMixins        []*Builder `protobuf:"bytes,3,rep,name=builder_mixins,json=builderMixins,proto3" json:"builder_mixins,omitempty"`
	XXX_NoUnkeyedLiteral struct{}   `json:"-"`
	XXX_unrecognized     []byte     `json:"-"`
	XXX_sizecache        int32      `json:"-"`
}

type Builder struct {
	// Name of the builder or builder mixin.
	//
	// If a builder name, will be propagated to "builder" build tag and
	// "buildername" recipe property.
	Name string `protobuf:"bytes,1,opt,name=name,proto3" json:"name,omitempty"`
	// Hostname of the swarming instance, e.g. "chromium-swarm.appspot.com".
	// Required, but defaults to deprecated Swarming.hostname.
	SwarmingHost string `protobuf:"bytes,21,opt,name=swarming_host,json=swarmingHost,proto3" json:"swarming_host,omitempty"`
	// Names of mixins to apply to this builder definition.
	//
	// FLATTENING
	//
	// Final builder/mixin values are computed as follows:
	// - start with an empty builder definition.
	// - if this is a builder, apply values in a bucket's builder_defaults,
	//   flattened in advance.
	// - apply each mixin, flattened in advance, in the same order.
	// - apply values in this builder/mixin.
	//
	// EXAMPLE
	//
	//   A definition
	//
	//     builder_mixins {
	//       name: "foo"
	//       dimensions: "os:Linux"
	//       dimensions: "cpu:x86"
	//       recipe {
	//         repository: "https://example.com"
	//         name: "x"
	//       }
	//     }
	//     builder_mixins {
	//       name: "bar"
	//       dimensions: "cores:8"
	//       dimensions: "cpu:x86-64"
	//     }
	//     bucket {
	//       name: "luci.x.try"
	//       swarming {
	//         builders {
	//           name: "release"
	//           mixins: "foo"
	//           mixins: "bar"
	//           recipe {
	//             name: "y"
	//           }
	//         }
	//       }
	//     }
	//
	//   is equivalent to
	//
	//     bucket {
	//      name: "luci.x.try"
	//      swarming {
	//         builders {
	//           name: "release"
	//           dimensions: "os:Linux"
	//           dimensions: "cpu:x86-64"
	//           dimensions: "cores:8"
	//           recipe {
	//             repository: "https://example.com"
	//             name: "y"
	//           }
	//         }
	//       }
	//     }
	//
	// A NOTE ON DIAMOND MERGES
	//
	// Given
	//   B mixes in A and overrides some values defined in A
	//   C mixes in A
	//   D mixes in B and C
	// B's overrides won't affect D because D mixes in C after B.
	//
	//   builder_mixins {
	//     name: "A"
	//     dimensions: "dim:a"
	//   }
	//   builder_mixins {
	//     name: "B"
	//     mixins: "A"
	//     dimensions: "dim:b"
	//   }
	//   builder_mixins {
	//     name: "C"
	//     mixins: "A"
	//   }
	//   ...
	//   builders {
	//     name: "D"
	//     mixins: "B"
	//     mixins: "C"
	//   }
	//
	// D's dim will be "a", not "b" because it is "a" in C which is applied after
	// B.
	//
	// OTHER
	//
	// Circular references are prohibited.
	Mixins []string `protobuf:"bytes,10,rep,name=mixins,proto3" json:"mixins,omitempty"`
	// Builder category. Will be used for visual grouping, for example in Code Review.
	Category string `protobuf:"bytes,6,opt,name=category,proto3" json:"category,omitempty"`
	// DEPRECATED.
	// Used only to enable "vpython:native-python-wrapper"
	// Does NOT actually propagate to swarming.
	SwarmingTags []string `protobuf:"bytes,2,rep,name=swarming_tags,json=swarmingTags,proto3" json:"swarming_tags,omitempty"`
	// A requirement for a bot to execute the build.
	//
	// Supports 3 forms:
	// - "<key>:" - exclude the defaults for the key.
	//   Mutually exclusive with other forms.
	// - "<key>:<value>" - require a bot with this dimension.
	//   This is a shortcut for "0:<key>:<value>", see below.
	// - "<expiration_secs>:<key>:<value>" - wait for up to expiration_secs.
	//   for a bot with the dimension.
	//   Supports multiple values for different keys and expiration_secs.
	//   expiration_secs must be a multiple of 60.
	//
	// When merging a set of dimensions S1 into S2, all dimensions in S1 with a
	// key K replace all dimensions in S2 with K. This logic is used when applying
	// builder mixins and dimensions specified in a build request.
	//
	// If this builder is defined in a bucket, dimension "pool" is defaulted
	// to the name of the bucket. See Bucket message below.
	Dimensions []string `protobuf:"bytes,3,rep,name=dimensions,proto3" json:"dimensions,omitempty"`
	// Specifies that a recipe to run.
	// DEPRECATED: use exe.
	Recipe *Builder_Recipe `protobuf:"bytes,4,opt,name=recipe,proto3" json:"recipe,omitempty"`
	// What to run when a build is ready to start.
	Exe *Executable `protobuf:"bytes,23,opt,name=exe,proto3" json:"exe,omitempty"`
	// A JSON object representing Build.input.properties.
	// Individual object properties can be overridden with
	// ScheduleBuildRequest.properties.
	Properties string `protobuf:"bytes,24,opt,name=properties,proto3" json:"properties,omitempty"`
	// Swarming task priority.
	// A value between 20 and 255, inclusive.
	// Lower means more important.
	//
	// The default value is configured in
	// https://chrome-internal.googlesource.com/infradata/config/+/master/configs/cr-buildbucket/swarming_task_template.json
	//
	// See also https://chromium.googlesource.com/infra/luci/luci-py.git/+/master/appengine/swarming/doc/User-Guide.md#request
	Priority uint32 `protobuf:"varint,5,opt,name=priority,proto3" json:"priority,omitempty"`
	// Maximum build execution time. Not to be confused with pending time.
	ExecutionTimeoutSecs uint32 `protobuf:"varint,7,opt,name=execution_timeout_secs,json=executionTimeoutSecs,proto3" json:"execution_timeout_secs,omitempty"`
	// Maximum build pending time.
	ExpirationSecs uint32 `protobuf:"varint,20,opt,name=expiration_secs,json=expirationSecs,proto3" json:"expiration_secs,omitempty"`
	// Caches that should be present on the bot.
	Caches []*Builder_CacheEntry `protobuf:"bytes,9,rep,name=caches,proto3" json:"caches,omitempty"`
	// If YES, generate monotonically increasing contiguous numbers for each
	// build, unique within the builder.
	// Note: this limits the build creation rate in this builder to 5 per second.
	BuildNumbers Toggle `protobuf:"varint,16,opt,name=build_numbers,json=buildNumbers,proto3,enum=buildbucket.Toggle" json:"build_numbers,omitempty"`
	// Email of a service account to run the build as or literal 'bot' string to
	// use Swarming bot's account (if available). Passed directly to Swarming.
	// Subject to Swarming's ACLs.
	ServiceAccount string `protobuf:"bytes,12,opt,name=service_account,json=serviceAccount,proto3" json:"service_account,omitempty"`
	// If YES, each builder will get extra dimension "builder:<builder name>"
	// added. Default is UNSET.
	//
	// For example, this config
	//
	//   builder {
	//     name: "linux-compiler"
	//     dimension: "builder:linux-compiler"
	//   }
	//
	// is equivalent to this:
	//
	//   builders {
	//     name: "linux-compiler"
	//     auto_builder_dimension: YES
	//   }
	//
	// We've considered providing interpolation like this
	//   builder_defaults {
	//     dimensions: "builder:${BUILDER}"
	//   }
	// (see also http://docs.buildbot.net/0.8.9/manual/cfg-properties.html#interpolate)
	// but are currently against complicating config with this.
	AutoBuilderDimension Toggle `` /* 149-byte string literal not displayed */
	// If YES, by default a new build in this builder will be marked as
	// experimental.
	// This is useful for inherently experimental builders that use production
	// recipes.
	// See also luci_migration_host field.
	Experimental Toggle `protobuf:"varint,18,opt,name=experimental,proto3,enum=buildbucket.Toggle" json:"experimental,omitempty"`
	// If not empty and not "-", and a build request is not marked as
	// experimental/prod explicitly and has "mastername" property, buildbucket
	// will contact this instance of luci-migration app to determine whether the
	// builder is experimental.
	// On success, this takes precedence over Builder.experimental proto field
	// (above).
	//
	// Special value "-" means no luci_migration_host specified.
	// Useful in a builder that wants to override luci_migration_host
	// specified in builder_defaults or mixin.
	LuciMigrationHost string `protobuf:"bytes,19,opt,name=luci_migration_host,json=luciMigrationHost,proto3" json:"luci_migration_host,omitempty"`
	// Percentage of builds that should use a canary swarming task template.
	// A value from 0 to 100.
	// If omitted, a global server-defined default percentage is used.
	TaskTemplateCanaryPercentage *wrappers.UInt32Value `` /* 150-byte string literal not displayed */
	XXX_NoUnkeyedLiteral         struct{}              `json:"-"`
	XXX_unrecognized             []byte                `json:"-"`
	XXX_sizecache                int32                 `json:"-"`
}

type BuilderID struct {
	// Project ID, e.g. "chromium". Unique within a LUCI deployment.
	Project string `protobuf:"bytes,1,opt,name=project,proto3" json:"project,omitempty"`
	// Bucket name, e.g. "try". Unique within the project.
	// Together with project, defines an ACL.
	Bucket string `protobuf:"bytes,2,opt,name=bucket,proto3" json:"bucket,omitempty"`
	// Builder name, e.g. "linux-rel". Unique within the bucket.
	Builder              string   `protobuf:"bytes,3,opt,name=builder,proto3" json:"builder,omitempty"`
	XXX_NoUnkeyedLiteral struct{} `json:"-"`
	XXX_unrecognized     []byte   `json:"-"`
	XXX_sizecache        int32    `json:"-"`
}

type BuilderPredicate struct {
	// OR-connected list of regular expressions for a string
	// "{project}/{bucket}/{builder}".
	// Each regex is wrapped in ^ and $ automatically.
	// Examples:
	//
	//   # All builders in "chromium" project
	//   regex: "chromium/.+"
	//   # A specific builder.
	//   regex: "infra/ci/infra-continuous-trusty-64"
	//
	// Defaults to [".*"].
	Regex []string `protobuf:"bytes,1,rep,name=regex,proto3" json:"regex,omitempty"`
	// Like regex field, but negation. Negation always wins.
	RegexExclude         []string `protobuf:"bytes,2,rep,name=regex_exclude,json=regexExclude,proto3" json:"regex_exclude,omitempty"`
	XXX_NoUnkeyedLiteral struct{} `json:"-"`
	XXX_unrecognized     []byte   `json:"-"`
	XXX_sizecache        int32    `json:"-"`
}

type Builder_CacheEntry struct {
	// Identifier of the cache. Length is limited to 128.
	// Defaults to path.
	// See also BuildInfra.Swarming.CacheEntry.name in build.proto.
	Name string `protobuf:"bytes,1,opt,name=name,proto3" json:"name,omitempty"`
	// Relative path where the cache in mapped into. Required.
	// See also BuildInfra.Swarming.CacheEntry.path in build.proto.
	Path string `protobuf:"bytes,2,opt,name=path,proto3" json:"path,omitempty"`
	// Number of seconds to wait for a bot with a warm cache to pick up the
	// task, before falling back to a bot with a cold (non-existent) cache.
	// See also BuildInfra.Swarming.CacheEntry.wait_for_warm_cache in build.proto.
	// The value must be multiples of 60 seconds.
	WaitForWarmCacheSecs int32 `` /* 128-byte string literal not displayed */
	// Environment variable with this name will be set to the path to the cache
	// directory.
	EnvVar               string   `protobuf:"bytes,4,opt,name=env_var,json=envVar,proto3" json:"env_var,omitempty"`
	XXX_NoUnkeyedLiteral struct{} `json:"-"`
	XXX_unrecognized     []byte   `json:"-"`
	XXX_sizecache        int32    `json:"-"`
}

type Builder_Recipe struct {
	// Name of the recipe to run.
	Name string `protobuf:"bytes,2,opt,name=name,proto3" json:"name,omitempty"`
	// The CIPD package to fetch the recipes from.
	//
	// Typically the package will look like:
	//
	//   infra/recipe_bundles/chromium.googlesource.com/chromium/tools/build
	//
	// Recipes bundled from internal repositories are typically under
	// `infra_internal/recipe_bundles/...`.
	//
	// But if you're building your own recipe bundles, they could be located
	// elsewhere.
	CipdPackage string `protobuf:"bytes,6,opt,name=cipd_package,json=cipdPackage,proto3" json:"cipd_package,omitempty"`
	// The CIPD version to fetch. This can be a lower-cased git ref (like
	// `refs/heads/master` or `head`), or it can be a cipd tag (like
	// `git_revision:dead...beef`).
	//
	// The default is `head`, which corresponds to the git repo's HEAD ref. This
	// is typically (but not always) a symbolic ref for `refs/heads/master`.
	CipdVersion string `protobuf:"bytes,5,opt,name=cipd_version,json=cipdVersion,proto3" json:"cipd_version,omitempty"`
	// Colon-separated build properties to set.
	// Ignored if Builder.properties is set.
	//
	// Use this field for string properties and use properties_j for other
	// types.
	Properties []string `protobuf:"bytes,3,rep,name=properties,proto3" json:"properties,omitempty"`
	// Same as properties, but the value must valid JSON. For example
	//   properties_j: "a:1"
	// means property a is a number 1, not string "1".
	//
	// If null, it means no property must be defined. In particular, it removes
	// a default value for the property, if any.
	//
	// Fields properties and properties_j can be used together, but cannot both
	// specify values for same property.
	PropertiesJ          []string `protobuf:"bytes,4,rep,name=properties_j,json=propertiesJ,proto3" json:"properties_j,omitempty"`
	XXX_NoUnkeyedLiteral struct{} `json:"-"`
	XXX_unrecognized     []byte   `json:"-"`
	XXX_sizecache        int32    `json:"-"`
}

type BuildsClient interface {
	// Gets a build.
	//
	// By default the returned build does not include all fields.
	// See GetBuildRequest.fields.
	//
	// Buildbot: if the specified build is a buildbot build, converts it to Build
	// message with the following rules:
	// * bucket names are full, e.g. "master.chromium". Note that LUCI buckets
	//   in v2 are shortened, e.g. "ci".
	// * if a v2 Build field does not make sense in V1, it is unset/empty.
	// * step support is not implemented for Buildbot builds.
	// Note that it does not support getting a buildbot build by build number.
	GetBuild(ctx context.Context, in *GetBuildRequest, opts ...grpc.CallOption) (*Build, error)
	// Searches for builds.
	//
	// Buildbot: can return Buildbot builds, see GetBuild for conversion rules.
	// For example, response may include a mix of LUCI and Buildbot builds if the
	// predicate is a CL.
	// Cannot search in a buildbot bucket or buildbot builder, e.g.
	// {
	//   "predicate": {
	//     "builder": {
	//       "project": "chromium",
	//       "bucket": "master.chromium",
	//       "builder": "linux-rel"
	//     }
	//   }
	// }
	// will look for builds in "master.chromium" LUCI bucket which probably does
	// not exist.
	SearchBuilds(ctx context.Context, in *SearchBuildsRequest, opts ...grpc.CallOption) (*SearchBuildsResponse, error)
	// Updates a build. Returns an empty build.
	//
	// RPC metadata must include "X-Build-Token" key with a token
	// generated by the server when scheduling the build.
	UpdateBuild(ctx context.Context, in *UpdateBuildRequest, opts ...grpc.CallOption) (*Build, error)
	// Schedules a new build.
	// The requester must have at least SCHEDULER role in the destination bucket.
	ScheduleBuild(ctx context.Context, in *ScheduleBuildRequest, opts ...grpc.CallOption) (*Build, error)
	// Cancels a build.
	// The requester must have at least SCHEDULER role in the destination bucket.
	CancelBuild(ctx context.Context, in *CancelBuildRequest, opts ...grpc.CallOption) (*Build, error)
	// Executes multiple requests in a batch.
	// The response code is always OK.
	Batch(ctx context.Context, in *BatchRequest, opts ...grpc.CallOption) (*BatchResponse, error)
}

type BuildsServer interface {
	// Gets a build.
	//
	// By default the returned build does not include all fields.
	// See GetBuildRequest.fields.
	//
	// Buildbot: if the specified build is a buildbot build, converts it to Build
	// message with the following rules:
	// * bucket names are full, e.g. "master.chromium". Note that LUCI buckets
	//   in v2 are shortened, e.g. "ci".
	// * if a v2 Build field does not make sense in V1, it is unset/empty.
	// * step support is not implemented for Buildbot builds.
	// Note that it does not support getting a buildbot build by build number.
	GetBuild(context.Context, *GetBuildRequest) (*Build, error)
	// Searches for builds.
	//
	// Buildbot: can return Buildbot builds, see GetBuild for conversion rules.
	// For example, response may include a mix of LUCI and Buildbot builds if the
	// predicate is a CL.
	// Cannot search in a buildbot bucket or buildbot builder, e.g.
	// {
	//   "predicate": {
	//     "builder": {
	//       "project": "chromium",
	//       "bucket": "master.chromium",
	//       "builder": "linux-rel"
	//     }
	//   }
	// }
	// will look for builds in "master.chromium" LUCI bucket which probably does
	// not exist.
	SearchBuilds(context.Context, *SearchBuildsRequest) (*SearchBuildsResponse, error)
	// Updates a build. Returns an empty build.
	//
	// RPC metadata must include "X-Build-Token" key with a token
	// generated by the server when scheduling the build.
	UpdateBuild(context.Context, *UpdateBuildRequest) (*Build, error)
	// Schedules a new build.
	// The requester must have at least SCHEDULER role in the destination bucket.
	ScheduleBuild(context.Context, *ScheduleBuildRequest) (*Build, error)
	// Cancels a build.
	// The requester must have at least SCHEDULER role in the destination bucket.
	CancelBuild(context.Context, *CancelBuildRequest) (*Build, error)
	// Executes multiple requests in a batch.
	// The response code is always OK.
	Batch(context.Context, *BatchRequest) (*BatchResponse, error)
}

type CancelBuildRequest struct {
	// ID of the build to cancel.
	Id int64 `protobuf:"varint,1,opt,name=id,proto3" json:"id,omitempty"`
	// Required. Value for Build.summary_markdown.
	SummaryMarkdown string `protobuf:"bytes,2,opt,name=summary_markdown,json=summaryMarkdown,proto3" json:"summary_markdown,omitempty"`
	// Fields to include in the response. See also GetBuildRequest.fields.
	Fields               *field_mask.FieldMask `protobuf:"bytes,100,opt,name=fields,proto3" json:"fields,omitempty"`
	XXX_NoUnkeyedLiteral struct{}              `json:"-"`
	XXX_unrecognized     []byte                `json:"-"`
	XXX_sizecache        int32                 `json:"-"`
}

type Executable struct {
	// The CIPD package containing the executable.
	// On Linux/Mac, the executable MUST be named "run_build".
	// On Windows, it MUST be named "run_build.exe" or "run_build.bat",
	// in this order of precedence.
	CipdPackage string `protobuf:"bytes,1,opt,name=cipd_package,json=cipdPackage,proto3" json:"cipd_package,omitempty"`
	// The CIPD version to fetch. Defaults to `latest`.
	CipdVersion          string   `protobuf:"bytes,2,opt,name=cipd_version,json=cipdVersion,proto3" json:"cipd_version,omitempty"`
	XXX_NoUnkeyedLiteral struct{} `json:"-"`
	XXX_unrecognized     []byte   `json:"-"`
	XXX_sizecache        int32    `json:"-"`
}

type GerritChange struct {
	// Gerrit hostname, e.g. "chromium-review.googlesource.com".
	Host string `protobuf:"bytes,1,opt,name=host,proto3" json:"host,omitempty"`
	// Gerrit project, e.g. "chromium/src".
	Project string `protobuf:"bytes,2,opt,name=project,proto3" json:"project,omitempty"`
	// Change number, e.g. 12345.
	Change int64 `protobuf:"varint,3,opt,name=change,proto3" json:"change,omitempty"`
	// Patch set number, e.g. 1.
	Patchset             int64    `protobuf:"varint,4,opt,name=patchset,proto3" json:"patchset,omitempty"`
	XXX_NoUnkeyedLiteral struct{} `json:"-"`
	XXX_unrecognized     []byte   `json:"-"`
	XXX_sizecache        int32    `json:"-"`
}

type GetBuildRequest struct {
	// Build id.
	// Mutually exclusive with builder and number.
	Id int64 `protobuf:"varint,1,opt,name=id,proto3" json:"id,omitempty"`
	// Builder of the build.
	// Requires number. Mutually exclusive with id.
	Builder *BuilderID `protobuf:"bytes,2,opt,name=builder,proto3" json:"builder,omitempty"`
	// Build number.
	// Requires builder. Mutually exclusive with id.
	BuildNumber int32 `protobuf:"varint,3,opt,name=build_number,json=buildNumber,proto3" json:"build_number,omitempty"`
	// Fields to include in the response.
	// If not set, the default mask is used, see Build message comments for the
	// list of fields returned by default.
	//
	// Supports advanced semantics, see
	// https://chromium.googlesource.com/infra/luci/luci-py/+/f9ae69a37c4bdd0e08a8b0f7e123f6e403e774eb/appengine/components/components/protoutil/field_masks.py#7
	// In particular, if the client needs only some output properties, they
	// can be requested with paths "output.properties.fields.foo".
	Fields               *field_mask.FieldMask `protobuf:"bytes,100,opt,name=fields,proto3" json:"fields,omitempty"`
	XXX_NoUnkeyedLiteral struct{}              `json:"-"`
	XXX_unrecognized     []byte                `json:"-"`
	XXX_sizecache        int32                 `json:"-"`
}

type GitilesCommit struct {
	// Gitiles hostname, e.g. "chromium.googlesource.com".
	Host string `protobuf:"bytes,1,opt,name=host,proto3" json:"host,omitempty"`
	// Repository name on the host, e.g. "chromium/src".
	Project string `protobuf:"bytes,2,opt,name=project,proto3" json:"project,omitempty"`
	// Commit HEX SHA1.
	Id string `protobuf:"bytes,3,opt,name=id,proto3" json:"id,omitempty"`
	// Commit ref, e.g. "refs/heads/master".
	// NOT a branch name: if specified, must start with "refs/".
	Ref string `protobuf:"bytes,4,opt,name=ref,proto3" json:"ref,omitempty"`
	// Defines a total order of commits on the ref. Requires ref field.
	// Typically 1-based, monotonically increasing, contiguous integer
	// defined by a Gerrit plugin, goto.google.com/git-numberer.
	// TODO(tandrii): make it a public doc.
	Position             uint32   `protobuf:"varint,5,opt,name=position,proto3" json:"position,omitempty"`
	XXX_NoUnkeyedLiteral struct{} `json:"-"`
	XXX_unrecognized     []byte   `json:"-"`
	XXX_sizecache        int32    `json:"-"`
}

type LogDogSettings struct {
	// Hostname of the LogDog instance to use, e.g. "logs.chromium.org".
	Hostname             string   `protobuf:"bytes,1,opt,name=hostname,proto3" json:"hostname,omitempty"`
	XXX_NoUnkeyedLiteral struct{} `json:"-"`
	XXX_unrecognized     []byte   `json:"-"`
	XXX_sizecache        int32    `json:"-"`
}

type MockBuildsClient struct {
	// contains filtered or unexported fields
}

type MockBuildsClientMockRecorder struct {
	// contains filtered or unexported fields
}