lambda

type AddPermissionInput struct {
	// The AWS Lambda action you want to allow in this statement. Each Lambda action
	// is a string starting with "lambda:" followed by the API name (see Operations).
	// For example, "lambda:CreateFunction". You can use wildcard ("lambda:*") to
	// grant permission for all AWS Lambda actions.
	Action *string `type:"string" required:"true"`

	// Name of the Lambda function whose access policy you are updating by adding
	// a new permission.
	//
	//  You can specify an unqualified function name (for example, "Thumbnail")
	// or you can specify Amazon Resource Name (ARN) of the function (for example,
	// "arn:aws:lambda:us-west-2:account-id:function:ThumbNail"). AWS Lambda also
	// allows you to specify only the account ID qualifier (for example, "account-id:Thumbnail").
	// Note that the length constraint applies only to the ARN. If you specify only
	// the function name, it is limited to 64 character in length.
	FunctionName *string `location:"uri" locationName:"FunctionName" type:"string" required:"true"`

	// The principal who is getting this permission. It can be Amazon S3 service
	// Principal ("s3.amazonaws.com") if you want Amazon S3 to invoke the function,
	// an AWS account ID if you are granting cross-account permission, or any valid
	// AWS service principal such as "sns.amazonaws.com". For example, you might
	// want to allow a custom application in another AWS account to push events
	// to AWS Lambda by invoking your function.
	Principal *string `type:"string" required:"true"`

	// This is optional; however, when granting Amazon S3 permission to invoke your
	// function, you should specify this field with the bucket Amazon Resource Name
	// (ARN) as its value. This ensures that only events generated from the specified
	// bucket can invoke the function.
	//
	// If you add a permission for the Amazon S3 principal without providing the
	// source ARN, any AWS account that creates a mapping to your function ARN can
	// send events to invoke your Lambda function from Amazon S3.
	SourceARN *string `locationName:"SourceArn" type:"string"`

	// The AWS account ID (without a hyphen) of the source owner. If the SourceArn
	// identifies a bucket, then this is the bucket owner's account ID. You can
	// use this additional condition to ensure the bucket you specify is owned by
	// a specific account (it is possible the bucket owner deleted the bucket and
	// some other AWS account created the bucket). You can also use this condition
	// to specify all sources (that is, you don't specify the SourceArn) owned by
	// a specific account.
	SourceAccount *string `type:"string"`

	// A unique statement identifier.
	StatementID *string `locationName:"StatementId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

type AddPermissionOutput struct {
	// The permission statement you specified in the request. The response returns
	// the same as a string using "\" as an escape character in the JSON.
	Statement *string `type:"string"`
	// contains filtered or unexported fields
}

type CreateEventSourceMappingInput struct {
	// The largest number of records that AWS Lambda will retrieve from your event
	// source at the time of invoking your function. Your function receives an event
	// with all the retrieved records. The default is 100 records.
	BatchSize *int64 `type:"integer"`

	// Indicates whether AWS Lambda should begin polling the event source.
	Enabled *bool `type:"boolean"`

	// The Amazon Resource Name (ARN) of the Amazon Kinesis or the Amazon DynamoDB
	// stream that is the event source. Any record added to this stream could cause
	// AWS Lambda to invoke your Lambda function, it depends on the BatchSize. AWS
	// Lambda POSTs the Amazon Kinesis event, containing records, to your Lambda
	// function as JSON.
	EventSourceARN *string `locationName:"EventSourceArn" type:"string" required:"true"`

	// The Lambda function to invoke when AWS Lambda detects an event on the stream.
	//
	//  You can specify an unqualified function name (for example, "Thumbnail")
	// or you can specify Amazon Resource Name (ARN) of the function (for example,
	// "arn:aws:lambda:us-west-2:account-id:function:ThumbNail"). AWS Lambda also
	// allows you to specify only the account ID qualifier (for example, "account-id:Thumbnail").
	// Note that the length constraint applies only to the ARN. If you specify only
	// the function name, it is limited to 64 character in length.
	FunctionName *string `type:"string" required:"true"`

	// The position in the stream where AWS Lambda should start reading. For more
	// information, go to ShardIteratorType (http://docs.aws.amazon.com/kinesis/latest/APIReference/API_GetShardIterator.html#Kinesis-GetShardIterator-request-ShardIteratorType)
	// in the Amazon Kinesis API Reference.
	StartingPosition *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

type CreateFunctionInput struct {
	// The code for the Lambda function.
	Code *FunctionCode `type:"structure" required:"true"`

	// A short, user-defined function description. Lambda does not use this value.
	// Assign a meaningful description as you see fit.
	Description *string `type:"string"`

	// The name you want to assign to the function you are uploading. You can specify
	// an unqualified function name (for example, "Thumbnail") or you can specify
	// Amazon Resource Name (ARN) of the function (for example, "arn:aws:lambda:us-west-2:account-id:function:ThumbNail").
	// AWS Lambda also allows you to specify only the account ID qualifier (for
	// example, "account-id:Thumbnail"). Note that the length constraint applies
	// only to the ARN. If you specify only the function name, it is limited to
	// 64 character in length. The function names appear in the console and are
	// returned in the ListFunctions API. Function names are used to specify functions
	// to other AWS Lambda APIs, such as Invoke.
	FunctionName *string `type:"string" required:"true"`

	// The function within your code that Lambda calls to begin execution. For Node.js,
	// it is the module-name.export value in your function.
	Handler *string `type:"string" required:"true"`

	// The amount of memory, in MB, your Lambda function is given. Lambda uses this
	// memory size to infer the amount of CPU and memory allocated to your function.
	// Your function use-case determines your CPU and memory requirements. For example,
	// a database operation might need less memory compared to an image processing
	// function. The default value is 128 MB. The value must be a multiple of 64
	// MB.
	MemorySize *int64 `type:"integer"`

	// The Amazon Resource Name (ARN) of the IAM role that Lambda assumes when it
	// executes your function to access any other Amazon Web Services (AWS) resources.
	// For more information, see AWS Lambda: How it Works (http://docs.aws.amazon.com/lambda/latest/dg/lambda-introduction.html)
	Role *string `type:"string" required:"true"`

	// The runtime environment for the Lambda function you are uploading. Currently,
	// Lambda supports only "nodejs" as the runtime.
	Runtime *string `type:"string" required:"true"`

	// The function execution time at which Lambda should terminate the function.
	// Because the execution time has cost implications, we recommend you set this
	// value based on your expected execution time. The default is 3 seconds.
	Timeout *int64 `type:"integer"`
	// contains filtered or unexported fields
}

type DeleteEventSourceMappingInput struct {
	// The event source mapping ID.
	UUID *string `location:"uri" locationName:"UUID" type:"string" required:"true"`
	// contains filtered or unexported fields
}

type DeleteFunctionInput struct {
	// The Lambda function to delete.
	//
	//  You can specify an unqualified function name (for example, "Thumbnail")
	// or you can specify Amazon Resource Name (ARN) of the function (for example,
	// "arn:aws:lambda:us-west-2:account-id:function:ThumbNail"). AWS Lambda also
	// allows you to specify only the account ID qualifier (for example, "account-id:Thumbnail").
	// Note that the length constraint applies only to the ARN. If you specify only
	// the function name, it is limited to 64 character in length.
	FunctionName *string `location:"uri" locationName:"FunctionName" type:"string" required:"true"`
	// contains filtered or unexported fields
}

type DeleteFunctionOutput struct {
	// contains filtered or unexported fields
}

type EventSourceMappingConfiguration struct {
	// The largest number of records that AWS Lambda will retrieve from your event
	// source at the time of invoking your function. Your function receives an event
	// with all the retrieved records.
	BatchSize *int64 `type:"integer"`

	// The Amazon Resource Name (ARN) of the Amazon Kinesis stream that is the source
	// of events.
	EventSourceARN *string `locationName:"EventSourceArn" type:"string"`

	// The Lambda function to invoke when AWS Lambda detects an event on the stream.
	FunctionARN *string `locationName:"FunctionArn" type:"string"`

	// The UTC time string indicating the last time the event mapping was updated.
	LastModified *time.Time `type:"timestamp" timestampFormat:"unix"`

	// The result of the last AWS Lambda invocation of your Lambda function.
	LastProcessingResult *string `type:"string"`

	// The state of the event source mapping. It can be "Creating", "Enabled", "Disabled",
	// "Enabling", "Disabling", "Updating", or "Deleting".
	State *string `type:"string"`

	// The reason the event source mapping is in its current state. It is either
	// user-requested or an AWS Lambda-initiated state transition.
	StateTransitionReason *string `type:"string"`

	// The AWS Lambda assigned opaque identifier for the mapping.
	UUID *string `type:"string"`
	// contains filtered or unexported fields
}

type FunctionCode struct {
	// Amazon S3 bucket name where the .zip file containing your deployment package
	// is stored. This bucket must reside in the same AWS region where you are creating
	// the Lambda function.
	S3Bucket *string `type:"string"`

	// The Amazon S3 object (the deployment package) key name you want to upload.
	S3Key *string `type:"string"`

	// The Amazon S3 object (the deployment package) version you want to upload.
	S3ObjectVersion *string `type:"string"`

	// A base64-encoded .zip file containing your deployment package. For more information
	// about creating a .zip file, go to Execution Permissions (http://docs.aws.amazon.com/lambda/latest/dg/intro-permission-model.html#lambda-intro-execution-role.html)
	// in the AWS Lambda Developer Guide.
	ZipFile []byte `type:"blob"`
	// contains filtered or unexported fields
}

type FunctionCodeLocation struct {
	// The presigned URL you can use to download the function's .zip file that you
	// previously uploaded. The URL is valid for up to 10 minutes.
	Location *string `type:"string"`

	// The repository from which you can download the function.
	RepositoryType *string `type:"string"`
	// contains filtered or unexported fields
}

type FunctionConfiguration struct {
	// The size, in bytes, of the function .zip file you uploaded.
	CodeSize *int64 `type:"long"`

	// The user-provided description.
	Description *string `type:"string"`

	// The Amazon Resource Name (ARN) assigned to the function.
	FunctionARN *string `locationName:"FunctionArn" type:"string"`

	// The name of the function.
	FunctionName *string `type:"string"`

	// The function Lambda calls to begin executing your function.
	Handler *string `type:"string"`

	// The timestamp of the last time you updated the function.
	LastModified *string `type:"string"`

	// The memory size, in MB, you configured for the function. Must be a multiple
	// of 64 MB.
	MemorySize *int64 `type:"integer"`

	// The Amazon Resource Name (ARN) of the IAM role that Lambda assumes when it
	// executes your function to access any other Amazon Web Services (AWS) resources.
	Role *string `type:"string"`

	// The runtime environment for the Lambda function.
	Runtime *string `type:"string"`

	// The function execution time at which Lambda should terminate the function.
	// Because the execution time has cost implications, we recommend you set this
	// value based on your expected execution time. The default is 3 seconds.
	Timeout *int64 `type:"integer"`
	// contains filtered or unexported fields
}

type GetEventSourceMappingInput struct {
	// The AWS Lambda assigned ID of the event source mapping.
	UUID *string `location:"uri" locationName:"UUID" type:"string" required:"true"`
	// contains filtered or unexported fields
}

type GetFunctionConfigurationInput struct {
	// The name of the Lambda function for which you want to retrieve the configuration
	// information.
	//
	//  You can specify an unqualified function name (for example, "Thumbnail")
	// or you can specify Amazon Resource Name (ARN) of the function (for example,
	// "arn:aws:lambda:us-west-2:account-id:function:ThumbNail"). AWS Lambda also
	// allows you to specify only the account ID qualifier (for example, "account-id:Thumbnail").
	// Note that the length constraint applies only to the ARN. If you specify only
	// the function name, it is limited to 64 character in length.
	FunctionName *string `location:"uri" locationName:"FunctionName" type:"string" required:"true"`
	// contains filtered or unexported fields
}

type GetFunctionInput struct {
	// The Lambda function name.
	//
	//  You can specify an unqualified function name (for example, "Thumbnail")
	// or you can specify Amazon Resource Name (ARN) of the function (for example,
	// "arn:aws:lambda:us-west-2:account-id:function:ThumbNail"). AWS Lambda also
	// allows you to specify only the account ID qualifier (for example, "account-id:Thumbnail").
	// Note that the length constraint applies only to the ARN. If you specify only
	// the function name, it is limited to 64 character in length.
	FunctionName *string `location:"uri" locationName:"FunctionName" type:"string" required:"true"`
	// contains filtered or unexported fields
}

type GetFunctionOutput struct {
	// The object for the Lambda function location.
	Code *FunctionCodeLocation `type:"structure"`

	// A complex type that describes function metadata.
	Configuration *FunctionConfiguration `type:"structure"`
	// contains filtered or unexported fields
}

type GetPolicyInput struct {
	// Function name whose access policy you want to retrieve.
	//
	//  You can specify an unqualified function name (for example, "Thumbnail")
	// or you can specify Amazon Resource Name (ARN) of the function (for example,
	// "arn:aws:lambda:us-west-2:account-id:function:ThumbNail"). AWS Lambda also
	// allows you to specify only the account ID qualifier (for example, "account-id:Thumbnail").
	// Note that the length constraint applies only to the ARN. If you specify only
	// the function name, it is limited to 64 character in length.
	FunctionName *string `location:"uri" locationName:"FunctionName" type:"string" required:"true"`
	// contains filtered or unexported fields
}

type GetPolicyOutput struct {
	// The access policy associated with the specified function. The response returns
	// the same as a string using "\" as an escape character in the JSON.
	Policy *string `type:"string"`
	// contains filtered or unexported fields
}

type InvokeAsyncInput struct {
	// The Lambda function name.
	FunctionName *string `location:"uri" locationName:"FunctionName" type:"string" required:"true"`

	// JSON that you want to provide to your Lambda function as input.
	InvokeArgs io.ReadSeeker `type:"blob" required:"true"`
	// contains filtered or unexported fields
}

type InvokeAsyncOutput struct {
	// It will be 202 upon success.
	Status *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type InvokeInput struct {
	// Using the ClientContext you can pass client-specific information to the Lambda
	// function you are invoking. You can then process the client information in
	// your Lambda function as you choose through the context variable. For an example
	// of a ClientContext JSON, go to PutEvents (http://docs.aws.amazon.com/mobileanalytics/latest/ug/PutEvents.html)
	// in the Amazon Mobile Analytics API Reference and User Guide.
	//
	// The ClientContext JSON must be base64-encoded.
	ClientContext *string `location:"header" locationName:"X-Amz-Client-Context" type:"string"`

	// The Lambda function name.
	//
	//  You can specify an unqualified function name (for example, "Thumbnail")
	// or you can specify Amazon Resource Name (ARN) of the function (for example,
	// "arn:aws:lambda:us-west-2:account-id:function:ThumbNail"). AWS Lambda also
	// allows you to specify only the account ID qualifier (for example, "account-id:Thumbnail").
	// Note that the length constraint applies only to the ARN. If you specify only
	// the function name, it is limited to 64 character in length.
	FunctionName *string `location:"uri" locationName:"FunctionName" type:"string" required:"true"`

	// By default, the Invoke API assumes "RequestResponse" invocation type. You
	// can optionally request asynchronous execution by specifying "Event" as the
	// InvocationType. You can also use this parameter to request AWS Lambda to
	// not execute the function but do some verification, such as if the caller
	// is authorized to invoke the function and if the inputs are valid. You request
	// this by specifying "DryRun" as the InvocationType. This is useful in a cross-account
	// scenario when you want to verify access to a function without running it.
	InvocationType *string `location:"header" locationName:"X-Amz-Invocation-Type" type:"string"`

	// You can set this optional parameter to "Tail" in the request only if you
	// specify the InvocationType parameter with value "RequestResponse". In this
	// case, AWS Lambda returns the base64-encoded last 4 KB of log data produced
	// by your Lambda function in the x-amz-log-results header.
	LogType *string `location:"header" locationName:"X-Amz-Log-Type" type:"string"`

	// JSON that you want to provide to your Lambda function as input.
	Payload []byte `type:"blob"`
	// contains filtered or unexported fields
}

type InvokeOutput struct {
	// Indicates whether an error occurred while executing the Lambda function.
	// If an error occurred this field will have one of two values; Handled or Unhandled.
	// Handled errors are errors that are reported by the function while the Unhandled
	// errors are those detected and reported by AWS Lambda. Unhandled errors include
	// out of memory errors and function timeouts. For information about how to
	// report an Handled error, see Programming Model (http://docs.aws.amazon.com/lambda/latest/dg/programming-model.html).
	FunctionError *string `location:"header" locationName:"X-Amz-Function-Error" type:"string"`

	// It is the base64-encoded logs for the Lambda function invocation. This is
	// present only if the invocation type is "RequestResponse" and the logs were
	// requested.
	LogResult *string `location:"header" locationName:"X-Amz-Log-Result" type:"string"`

	// It is the JSON representation of the object returned by the Lambda function.
	// In This is present only if the invocation type is "RequestResponse".
	//
	// In the event of a function error this field contains a message describing
	// the error. For the Handled errors the Lambda function will report this message.
	// For Unhandled errors AWS Lambda reports the message.
	Payload []byte `type:"blob"`

	// The HTTP status code will be in the 200 range for successful request. For
	// the "RequestResonse" invocation type this status code will be 200. For the
	// "Event" invocation type this status code will be 202. For the "DryRun" invocation
	// type the status code will be 204.
	StatusCode *int64 `location:"statusCode" type:"integer"`
	// contains filtered or unexported fields
}

type Lambda struct {
	*aws.Service
}

type ListEventSourceMappingsInput struct {
	// The Amazon Resource Name (ARN) of the Amazon Kinesis stream.
	EventSourceARN *string `location:"querystring" locationName:"EventSourceArn" type:"string"`

	// The name of the Lambda function.
	//
	//  You can specify an unqualified function name (for example, "Thumbnail")
	// or you can specify Amazon Resource Name (ARN) of the function (for example,
	// "arn:aws:lambda:us-west-2:account-id:function:ThumbNail"). AWS Lambda also
	// allows you to specify only the account ID qualifier (for example, "account-id:Thumbnail").
	// Note that the length constraint applies only to the ARN. If you specify only
	// the function name, it is limited to 64 character in length.
	FunctionName *string `location:"querystring" locationName:"FunctionName" type:"string"`

	// Optional string. An opaque pagination token returned from a previous ListEventSourceMappings
	// operation. If present, specifies to continue the list from where the returning
	// call left off.
	Marker *string `location:"querystring" locationName:"Marker" type:"string"`

	// Optional integer. Specifies the maximum number of event sources to return
	// in response. This value must be greater than 0.
	MaxItems *int64 `location:"querystring" locationName:"MaxItems" type:"integer"`
	// contains filtered or unexported fields
}

type ListEventSourceMappingsOutput struct {
	// An array of EventSourceMappingConfiguration objects.
	EventSourceMappings []*EventSourceMappingConfiguration `type:"list"`

	// A string, present if there are more event source mappings.
	NextMarker *string `type:"string"`
	// contains filtered or unexported fields
}

type ListFunctionsInput struct {
	// Optional string. An opaque pagination token returned from a previous ListFunctions
	// operation. If present, indicates where to continue the listing.
	Marker *string `location:"querystring" locationName:"Marker" type:"string"`

	// Optional integer. Specifies the maximum number of AWS Lambda functions to
	// return in response. This parameter value must be greater than 0.
	MaxItems *int64 `location:"querystring" locationName:"MaxItems" type:"integer"`
	// contains filtered or unexported fields
}

type ListFunctionsOutput struct {
	// A list of Lambda functions.
	Functions []*FunctionConfiguration `type:"list"`

	// A string, present if there are more functions.
	NextMarker *string `type:"string"`
	// contains filtered or unexported fields
}

type RemovePermissionInput struct {
	// Lambda function whose access policy you want to remove a permission from.
	//
	//  You can specify an unqualified function name (for example, "Thumbnail")
	// or you can specify Amazon Resource Name (ARN) of the function (for example,
	// "arn:aws:lambda:us-west-2:account-id:function:ThumbNail"). AWS Lambda also
	// allows you to specify only the account ID qualifier (for example, "account-id:Thumbnail").
	// Note that the length constraint applies only to the ARN. If you specify only
	// the function name, it is limited to 64 character in length.
	FunctionName *string `location:"uri" locationName:"FunctionName" type:"string" required:"true"`

	// Statement ID of the permission to remove.
	StatementID *string `location:"uri" locationName:"StatementId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

type RemovePermissionOutput struct {
	// contains filtered or unexported fields
}

type UpdateEventSourceMappingInput struct {
	// The maximum number of stream records that can be sent to your Lambda function
	// for a single invocation.
	BatchSize *int64 `type:"integer"`

	// Specifies whether AWS Lambda should actively poll the stream or not. If disabled,
	// AWS Lambda will not poll the stream.
	Enabled *bool `type:"boolean"`

	// The Lambda function to which you want the stream records sent.
	//
	//  You can specify an unqualified function name (for example, "Thumbnail")
	// or you can specify Amazon Resource Name (ARN) of the function (for example,
	// "arn:aws:lambda:us-west-2:account-id:function:ThumbNail"). AWS Lambda also
	// allows you to specify only the account ID qualifier (for example, "account-id:Thumbnail").
	// Note that the length constraint applies only to the ARN. If you specify only
	// the function name, it is limited to 64 character in length.
	FunctionName *string `type:"string"`

	// The event source mapping identifier.
	UUID *string `location:"uri" locationName:"UUID" type:"string" required:"true"`
	// contains filtered or unexported fields
}

type UpdateFunctionCodeInput struct {
	// The existing Lambda function name whose code you want to replace.
	//
	//  You can specify an unqualified function name (for example, "Thumbnail")
	// or you can specify Amazon Resource Name (ARN) of the function (for example,
	// "arn:aws:lambda:us-west-2:account-id:function:ThumbNail"). AWS Lambda also
	// allows you to specify only the account ID qualifier (for example, "account-id:Thumbnail").
	// Note that the length constraint applies only to the ARN. If you specify only
	// the function name, it is limited to 64 character in length.
	FunctionName *string `location:"uri" locationName:"FunctionName" type:"string" required:"true"`

	// Amazon S3 bucket name where the .zip file containing your deployment package
	// is stored. This bucket must reside in the same AWS region where you are creating
	// the Lambda function.
	S3Bucket *string `type:"string"`

	// The Amazon S3 object (the deployment package) key name you want to upload.
	S3Key *string `type:"string"`

	// The Amazon S3 object (the deployment package) version you want to upload.
	S3ObjectVersion *string `type:"string"`

	// Based64-encoded .zip file containing your packaged source code.
	ZipFile []byte `type:"blob"`
	// contains filtered or unexported fields
}

type UpdateFunctionConfigurationInput struct {
	// A short user-defined function description. AWS Lambda does not use this value.
	// Assign a meaningful description as you see fit.
	Description *string `type:"string"`

	// The name of the Lambda function.
	//
	//  You can specify an unqualified function name (for example, "Thumbnail")
	// or you can specify Amazon Resource Name (ARN) of the function (for example,
	// "arn:aws:lambda:us-west-2:account-id:function:ThumbNail"). AWS Lambda also
	// allows you to specify only the account ID qualifier (for example, "account-id:Thumbnail").
	// Note that the length constraint applies only to the ARN. If you specify only
	// the function name, it is limited to 64 character in length.
	FunctionName *string `location:"uri" locationName:"FunctionName" type:"string" required:"true"`

	// The function that Lambda calls to begin executing your function. For Node.js,
	// it is the module-name.export value in your function.
	Handler *string `type:"string"`

	// The amount of memory, in MB, your Lambda function is given. AWS Lambda uses
	// this memory size to infer the amount of CPU allocated to your function. Your
	// function use-case determines your CPU and memory requirements. For example,
	// a database operation might need less memory compared to an image processing
	// function. The default value is 128 MB. The value must be a multiple of 64
	// MB.
	MemorySize *int64 `type:"integer"`

	// The Amazon Resource Name (ARN) of the IAM role that Lambda will assume when
	// it executes your function.
	Role *string `type:"string"`

	// The function execution time at which AWS Lambda should terminate the function.
	// Because the execution time has cost implications, we recommend you set this
	// value based on your expected execution time. The default is 3 seconds.
	Timeout *int64 `type:"integer"`
	// contains filtered or unexported fields
}