v1alpha1

type AccessLogPolicy struct {
	metav1.TypeMeta   `json:",inline"`
	metav1.ObjectMeta `json:"metadata,omitempty"`

	Spec AccessLogPolicySpec `json:"spec"`

	// Status defines the current state of AccessLogPolicy.
	//
	// +kubebuilder:default={conditions: {{type: "Accepted", status: "Unknown", reason:"NotReconciled", message:"Waiting for controller", lastTransitionTime: "1970-01-01T00:00:00Z"}}}
	Status AccessLogPolicyStatus `json:"status,omitempty"`
}

type AccessLogPolicyList struct {
	metav1.TypeMeta `json:",inline"`
	metav1.ListMeta `json:"metadata,omitempty"`
	Items           []AccessLogPolicy `json:"items"`
}

type AccessLogPolicySpec struct {
	// The Amazon Resource Name (ARN) of the destination that will store access logs.
	// Supported values are S3 Bucket, CloudWatch Log Group, and Firehose Delivery Stream ARNs.
	//
	// Changes to this value results in replacement of the VPC Lattice Access Log Subscription.
	// +kubebuilder:validation:Pattern=`^arn(:[a-z0-9]+([.-][a-z0-9]+)*){2}(:([a-z0-9]+([.-][a-z0-9]+)*)?){2}:([^/].*)?`
	DestinationArn *string `json:"destinationArn"`

	// TargetRef points to the Kubernetes Gateway, HTTPRoute, or GRPCRoute resource that will have this policy attached.
	//
	// This field is following the guidelines of Kubernetes Gateway API policy attachment.
	TargetRef *v1alpha2.PolicyTargetReference `json:"targetRef"`
}

type AccessLogPolicyStatus struct {
	// Conditions describe the current conditions of the AccessLogPolicy.
	//
	// Implementations should prefer to express Policy conditions
	// using the `PolicyConditionType` and `PolicyConditionReason`
	// constants so that operators and tools can converge on a common
	// vocabulary to describe AccessLogPolicy state.
	//
	// Known condition types are:
	//
	// * "Accepted"
	// * "Ready"
	//
	// +optional
	// +listType=map
	// +listMapKey=type
	// +kubebuilder:validation:MaxItems=8
	// +kubebuilder:default={{type: "Accepted", status: "Unknown", reason:"Pending", message:"Waiting for controller", lastTransitionTime: "1970-01-01T00:00:00Z"},{type: "Programmed", status: "Unknown", reason:"Pending", message:"Waiting for controller", lastTransitionTime: "1970-01-01T00:00:00Z"}}
	Conditions []metav1.Condition `json:"conditions,omitempty"`
}

type ClusterStatus struct {
	// cluster is the name of the exporting cluster. Must be a valid RFC-1123 DNS
	// label.
	Cluster string `json:"cluster"`
}

type HealthCheckConfig struct {
	// Indicates whether health checking is enabled.
	// +optional
	Enabled *bool `json:"enabled,omitempty"`

	// The approximate amount of time, in seconds, between health checks of an individual target.
	// +optional
	// +kubebuilder:validation:Minimum=5
	// +kubebuilder:validation:Maximum=300
	IntervalSeconds *int64 `json:"intervalSeconds,omitempty"`

	// The amount of time, in seconds, to wait before reporting a target as unhealthy.
	// +optional
	// +kubebuilder:validation:Minimum=1
	// +kubebuilder:validation:Maximum=120
	TimeoutSeconds *int64 `json:"timeoutSeconds,omitempty"`

	// The number of consecutive successful health checks required before considering an unhealthy target healthy.
	// +optional
	// +kubebuilder:validation:Minimum=2
	// +kubebuilder:validation:Maximum=10
	HealthyThresholdCount *int64 `json:"healthyThresholdCount,omitempty"`

	// The number of consecutive failed health checks required before considering a target unhealthy.
	// +optional
	// +kubebuilder:validation:Minimum=2
	// +kubebuilder:validation:Maximum=10
	UnhealthyThresholdCount *int64 `json:"unhealthyThresholdCount,omitempty"`

	// A regular expression to match HTTP status codes when checking for successful response from a target.
	// +optional
	StatusMatch *string `json:"statusMatch,omitempty"`

	// The destination for health checks on the targets.
	// +optional
	Path *string `json:"path,omitempty"`

	// The port used when performing health checks on targets. If not specified, health check defaults to the
	// port that a target receives traffic on.
	// +kubebuilder:validation:Minimum=1
	// +kubebuilder:validation:Maximum=65535
	Port *int64 `json:"port,omitempty"`

	// The protocol used when performing health checks on targets.
	// +optional
	Protocol *HealthCheckProtocol `json:"protocol,omitempty"`

	// The protocol version used when performing health checks on targets. Defaults to HTTP/1.
	// +optional
	ProtocolVersion *HealthCheckProtocolVersion `json:"protocolVersion,omitempty"`
}

type HealthCheckProtocol string

type HealthCheckProtocolVersion string

type IAMAuthPolicy struct {
	metav1.TypeMeta   `json:",inline"`
	metav1.ObjectMeta `json:"metadata,omitempty"`

	Spec IAMAuthPolicySpec `json:"spec"`

	// Status defines the current state of IAMAuthPolicy.
	//
	// +kubebuilder:default={conditions: {{type: "Accepted", status: "Unknown", reason:"NotReconciled", message:"Waiting for controller", lastTransitionTime: "1970-01-01T00:00:00Z"}}}
	Status IAMAuthPolicyStatus `json:"status,omitempty"`
}

type IAMAuthPolicyList struct {
	metav1.TypeMeta `json:",inline"`
	metav1.ListMeta `json:"metadata,omitempty"`
	Items           []IAMAuthPolicy `json:"items"`
}

type IAMAuthPolicySpec struct {

	// IAM auth policy content. It is a JSON string that uses the same syntax as AWS IAM policies. Please check the VPC Lattice documentation to get [the common elements in an auth policy](https://docs.aws.amazon.com/vpc-lattice/latest/ug/auth-policies.html#auth-policies-common-elements)
	Policy string `json:"policy"`

	// TargetRef points to the Kubernetes Gateway, HTTPRoute, or GRPCRoute resource that will have this policy attached.
	//
	// This field is following the guidelines of Kubernetes Gateway API policy attachment.
	TargetRef *v1alpha2.PolicyTargetReference `json:"targetRef"`
}

type IAMAuthPolicyStatus struct {
	// Conditions describe the current conditions of the IAMAuthPolicy.
	//
	// Implementations should prefer to express Policy conditions
	// using the `PolicyConditionType` and `PolicyConditionReason`
	// constants so that operators and tools can converge on a common
	// vocabulary to describe IAMAuthPolicy state.
	//
	// Known condition types are:
	//
	// * "Accepted"
	// * "Ready"
	//
	// +optional
	// +listType=map
	// +listMapKey=type
	// +kubebuilder:validation:MaxItems=8
	// +kubebuilder:default={{type: "Accepted", status: "Unknown", reason:"Pending", message:"Waiting for controller", lastTransitionTime: "1970-01-01T00:00:00Z"},{type: "Programmed", status: "Unknown", reason:"Pending", message:"Waiting for controller", lastTransitionTime: "1970-01-01T00:00:00Z"}}
	Conditions []metav1.Condition `json:"conditions,omitempty"`
}

type SecurityGroupId string

type ServiceExport struct {
	apimachineryv1.TypeMeta `json:",inline"`
	// +optional
	apimachineryv1.ObjectMeta `json:"metadata,omitempty"`
	// status describes the current state of an exported service.
	// Service configuration comes from the Service that had the same
	// name and namespace as this ServiceExport.
	// Populated by the multi-cluster service implementation's controller.
	// +optional
	Status ServiceExportStatus `json:"status,omitempty"`
}

type ServiceExportCondition struct {
	Type ServiceExportConditionType `json:"type"`
	// Status is one of {"True", "False", "Unknown"}
	// +kubebuilder:validation:Enum=True;False;Unknown
	Status corev1.ConditionStatus `json:"status"`
	// +optional
	LastTransitionTime *apimachineryv1.Time `json:"lastTransitionTime,omitempty"`
	// +optional
	Reason *string `json:"reason,omitempty"`
	// +optional
	Message *string `json:"message,omitempty"`
}

type ServiceExportConditionType string

type ServiceExportList struct {
	apimachineryv1.TypeMeta `json:",inline"`
	// Standard list metadata.
	// +optional
	apimachineryv1.ListMeta `json:"metadata,omitempty"`
	// List of endpoint slices
	// +listType=set
	Items []ServiceExport `json:"items"`
}

type ServiceExportStatus struct {
	// +optional
	// +patchStrategy=merge
	// +patchMergeKey=type
	// +listType=map
	// +listMapKey=type
	Conditions []ServiceExportCondition `json:"conditions,omitempty" patchStrategy:"merge" patchMergeKey:"type"`
}

type ServiceImport struct {
	apimachineryv1.TypeMeta `json:",inline"`
	// +optional
	apimachineryv1.ObjectMeta `json:"metadata,omitempty"`
	// spec defines the behavior of a ServiceImport.
	// +optional
	Spec ServiceImportSpec `json:"spec,omitempty"`
	// status contains information about the exported services that form
	// the multi-cluster service referenced by this ServiceImport.
	// +optional
	Status ServiceImportStatus `json:"status,omitempty"`
}

type ServiceImportList struct {
	apimachineryv1.TypeMeta `json:",inline"`
	// Standard list metadata.
	// +optional
	apimachineryv1.ListMeta `json:"metadata,omitempty"`
	// List of endpoint slices
	// +listType=set
	Items []ServiceImport `json:"items"`
}

type ServiceImportSpec struct {
	// +listType=atomic
	Ports []ServicePort `json:"ports"`
	// ip will be used as the VIP for this service when type is ClusterSetIP.
	// +kubebuilder:validation:MaxItems:=1
	// +optional
	IPs []string `json:"ips,omitempty"`
	// type defines the type of this service.
	// Must be ClusterSetIP or Headless.
	// +kubebuilder:validation:Enum=ClusterSetIP;Headless
	Type ServiceImportType `json:"type"`
	// Supports "ClientIP" and "None". Used to maintain session affinity.
	// Enable client IP based session affinity.
	// Must be ClientIP or None.
	// Defaults to None.
	// Ignored when type is Headless
	// More info: https://kubernetes.io/docs/concepts/services-networking/service/#virtual-ips-and-service-proxies
	// +optional
	SessionAffinity corev1.ServiceAffinity `json:"sessionAffinity,omitempty"`
	// sessionAffinityConfig contains session affinity configuration.
	// +optional
	SessionAffinityConfig *corev1.SessionAffinityConfig `json:"sessionAffinityConfig,omitempty"`
}

type ServiceImportStatus struct {
	// clusters is the list of exporting clusters from which this service
	// was derived.
	// +optional
	// +patchStrategy=merge
	// +patchMergeKey=cluster
	// +listType=map
	// +listMapKey=cluster
	Clusters []ClusterStatus `json:"clusters,omitempty"`
}

type ServiceImportType string

type ServicePort struct {
	// The name of this port within the service. This must be a DNS_LABEL.
	// All ports within a ServiceSpec must have unique names. When considering
	// the endpoints for a Service, this must match the 'name' field in the
	// EndpointPort.
	// Optional if only one ServicePort is defined on this service.
	// +optional
	Name string `json:"name,omitempty"`

	// The IP protocol for this port. Supports "TCP", "UDP", and "SCTP".
	// Default is TCP.
	// +optional
	Protocol corev1.Protocol `json:"protocol,omitempty"`

	// The application protocol for this port.
	// This field follows standard Kubernetes label syntax.
	// Un-prefixed names are reserved for IANA standard service names (as per
	// RFC-6335 and http://www.iana.org/assignments/service-names).
	// Non-standard protocols should use prefixed names such as
	// mycompany.com/my-custom-protocol.
	// Field can be enabled with ServiceAppProtocol feature gate.
	// +optional
	AppProtocol *string `json:"appProtocol,omitempty"`

	// The port that will be exposed by this service.
	Port int32 `json:"port"`
}

type TargetGroupPolicy struct {
	metav1.TypeMeta   `json:",inline"`
	metav1.ObjectMeta `json:"metadata,omitempty"`

	Spec TargetGroupPolicySpec `json:"spec"`

	// Status defines the current state of TargetGroupPolicy.
	//
	// +kubebuilder:default={conditions: {{type: "Accepted", status: "Unknown", reason:"NotReconciled", message:"Waiting for controller", lastTransitionTime: "1970-01-01T00:00:00Z"}}}
	Status TargetGroupPolicyStatus `json:"status,omitempty"`
}

type TargetGroupPolicyList struct {
	metav1.TypeMeta `json:",inline"`
	metav1.ListMeta `json:"metadata,omitempty"`
	Items           []TargetGroupPolicy `json:"items"`
}

type TargetGroupPolicySpec struct {
	// The protocol to use for routing traffic to the targets. Supported values are HTTP (default) and HTTPS.
	//
	// Changes to this value results in a replacement of VPC Lattice target group.
	// +optional
	Protocol *string `json:"protocol,omitempty"`

	// The protocol version to use. Supported values are HTTP1 (default) and HTTP2. When a policy is behind GRPCRoute,
	// this field value will be ignored as GRPC is only supported through HTTP/2.
	//
	// Changes to this value results in a replacement of VPC Lattice target group.
	// +optional
	ProtocolVersion *string `json:"protocolVersion,omitempty"`

	// TargetRef points to the kubernetes Service resource that will have this policy attached.
	//
	// This field is following the guidelines of Kubernetes Gateway API policy attachment.
	TargetRef *v1alpha2.PolicyTargetReference `json:"targetRef"`

	// The health check configuration.
	//
	// Changes to this value will update VPC Lattice resource in place.
	// +optional
	HealthCheck *HealthCheckConfig `json:"healthCheck,omitempty"`
}

type TargetGroupPolicyStatus struct {
	// Conditions describe the current conditions of the TargetGroup.
	//
	// Implementations should prefer to express Policy conditions
	// using the `PolicyConditionType` and `PolicyConditionReason`
	// constants so that operators and tools can converge on a common
	// vocabulary to describe TargetGroup state.
	//
	// Known condition types are:
	//
	// * "Accepted"
	// * "Ready"
	//
	// +optional
	// +listType=map
	// +listMapKey=type
	// +kubebuilder:validation:MaxItems=8
	// +kubebuilder:default={{type: "Accepted", status: "Unknown", reason:"Pending", message:"Waiting for controller", lastTransitionTime: "1970-01-01T00:00:00Z"},{type: "Programmed", status: "Unknown", reason:"Pending", message:"Waiting for controller", lastTransitionTime: "1970-01-01T00:00:00Z"}}
	Conditions []metav1.Condition `json:"conditions,omitempty"`
}

type VpcAssociationPolicy struct {
	metav1.TypeMeta   `json:",inline"`
	metav1.ObjectMeta `json:"metadata,omitempty"`

	Spec VpcAssociationPolicySpec `json:"spec"`

	Status VpcAssociationPolicyStatus `json:"status,omitempty"`
}

type VpcAssociationPolicyList struct {
	metav1.TypeMeta `json:",inline"`
	metav1.ListMeta `json:"metadata,omitempty"`
	Items           []VpcAssociationPolicy `json:"items"`
}

type VpcAssociationPolicySpec struct {

	// SecurityGroupIds defines the security groups enforced on the VpcServiceNetworkAssociation.
	// Security groups does not take effect if AssociateWithVpc is set to false.
	//
	// For more details, please check the VPC Lattice documentation https://docs.aws.amazon.com/vpc-lattice/latest/ug/security-groups.html
	//
	// +optional
	// +kubebuilder:validation:MinItems=1
	SecurityGroupIds []SecurityGroupId `json:"securityGroupIds,omitempty"`

	// AssociateWithVpc indicates whether the VpcServiceNetworkAssociation should be created for the current VPC of k8s cluster.
	//
	// This value will be considered true by default.
	// +optional
	AssociateWithVpc *bool `json:"associateWithVpc,omitempty"`

	// TargetRef points to the kubernetes Gateway resource that will have this policy attached.
	//
	// This field is following the guidelines of Kubernetes Gateway API policy attachment.
	TargetRef *v1alpha2.PolicyTargetReference `json:"targetRef"`
}

type VpcAssociationPolicyStatus struct {
	// Conditions describe the current conditions of the VpcAssociationPolicy.
	//
	// Implementations should prefer to express Policy conditions
	// using the `PolicyConditionType` and `PolicyConditionReason`
	// constants so that operators and tools can converge on a common
	// vocabulary to describe VpcAssociationPolicy state.
	//
	// Known condition types are:
	//
	// * "Accepted"
	//
	// +optional
	// +listType=map
	// +listMapKey=type
	// +kubebuilder:validation:MaxItems=8
	// +kubebuilder:default={{type: "Accepted", status: "Unknown", reason:"Pending", message:"Waiting for controller", lastTransitionTime: "1970-01-01T00:00:00Z"}}
	Conditions []metav1.Condition `json:"conditions,omitempty"`
}