types

type ALPNPolicyNotSupportedException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type Action struct {

	// The type of action.
	//
	// This member is required.
	Type ActionTypeEnum

	// [HTTPS listeners] Information for using Amazon Cognito to authenticate users.
	// Specify only when Type is authenticate-cognito .
	AuthenticateCognitoConfig *AuthenticateCognitoActionConfig

	// [HTTPS listeners] Information about an identity provider that is compliant with
	// OpenID Connect (OIDC). Specify only when Type is authenticate-oidc .
	AuthenticateOidcConfig *AuthenticateOidcActionConfig

	// [Application Load Balancer] Information for creating an action that returns a
	// custom HTTP response. Specify only when Type is fixed-response .
	FixedResponseConfig *FixedResponseActionConfig

	// Information for creating an action that distributes requests among one or more
	// target groups. For Network Load Balancers, you can specify a single target
	// group. Specify only when Type is forward . If you specify both ForwardConfig
	// and TargetGroupArn , you can specify only one target group using ForwardConfig
	// and it must be the same target group specified in TargetGroupArn .
	ForwardConfig *ForwardActionConfig

	// The order for the action. This value is required for rules with multiple
	// actions. The action with the lowest value for order is performed first.
	Order *int32

	// [Application Load Balancer] Information for creating a redirect action. Specify
	// only when Type is redirect .
	RedirectConfig *RedirectActionConfig

	// The Amazon Resource Name (ARN) of the target group. Specify only when Type is
	// forward and you want to route to a single target group. To route to one or more
	// target groups, use ForwardConfig instead.
	TargetGroupArn *string
	// contains filtered or unexported fields
}

type ActionTypeEnum string

type AllocationIdNotFoundException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type AnomalyDetection struct {

	// Indicates whether anomaly mitigation is in progress.
	MitigationInEffect MitigationInEffectEnum

	// The latest anomaly detection result.
	Result AnomalyResultEnum
	// contains filtered or unexported fields
}

type AnomalyResultEnum string

type AuthenticateCognitoActionConditionalBehaviorEnum string

type AuthenticateCognitoActionConfig struct {

	// The Amazon Resource Name (ARN) of the Amazon Cognito user pool.
	//
	// This member is required.
	UserPoolArn *string

	// The ID of the Amazon Cognito user pool client.
	//
	// This member is required.
	UserPoolClientId *string

	// The domain prefix or fully-qualified domain name of the Amazon Cognito user
	// pool.
	//
	// This member is required.
	UserPoolDomain *string

	// The query parameters (up to 10) to include in the redirect request to the
	// authorization endpoint.
	AuthenticationRequestExtraParams map[string]string

	// The behavior if the user is not authenticated. The following are possible
	// values:
	//   - deny - Return an HTTP 401 Unauthorized error.
	//   - allow - Allow the request to be forwarded to the target.
	//   - authenticate - Redirect the request to the IdP authorization endpoint. This
	//   is the default value.
	OnUnauthenticatedRequest AuthenticateCognitoActionConditionalBehaviorEnum

	// The set of user claims to be requested from the IdP. The default is openid . To
	// verify which scope values your IdP supports and how to separate multiple values,
	// see the documentation for your IdP.
	Scope *string

	// The name of the cookie used to maintain session information. The default is
	// AWSELBAuthSessionCookie.
	SessionCookieName *string

	// The maximum duration of the authentication session, in seconds. The default is
	// 604800 seconds (7 days).
	SessionTimeout *int64
	// contains filtered or unexported fields
}

type AuthenticateOidcActionConditionalBehaviorEnum string

type AuthenticateOidcActionConfig struct {

	// The authorization endpoint of the IdP. This must be a full URL, including the
	// HTTPS protocol, the domain, and the path.
	//
	// This member is required.
	AuthorizationEndpoint *string

	// The OAuth 2.0 client identifier.
	//
	// This member is required.
	ClientId *string

	// The OIDC issuer identifier of the IdP. This must be a full URL, including the
	// HTTPS protocol, the domain, and the path.
	//
	// This member is required.
	Issuer *string

	// The token endpoint of the IdP. This must be a full URL, including the HTTPS
	// protocol, the domain, and the path.
	//
	// This member is required.
	TokenEndpoint *string

	// The user info endpoint of the IdP. This must be a full URL, including the HTTPS
	// protocol, the domain, and the path.
	//
	// This member is required.
	UserInfoEndpoint *string

	// The query parameters (up to 10) to include in the redirect request to the
	// authorization endpoint.
	AuthenticationRequestExtraParams map[string]string

	// The OAuth 2.0 client secret. This parameter is required if you are creating a
	// rule. If you are modifying a rule, you can omit this parameter if you set
	// UseExistingClientSecret to true.
	ClientSecret *string

	// The behavior if the user is not authenticated. The following are possible
	// values:
	//   - deny - Return an HTTP 401 Unauthorized error.
	//   - allow - Allow the request to be forwarded to the target.
	//   - authenticate - Redirect the request to the IdP authorization endpoint. This
	//   is the default value.
	OnUnauthenticatedRequest AuthenticateOidcActionConditionalBehaviorEnum

	// The set of user claims to be requested from the IdP. The default is openid . To
	// verify which scope values your IdP supports and how to separate multiple values,
	// see the documentation for your IdP.
	Scope *string

	// The name of the cookie used to maintain session information. The default is
	// AWSELBAuthSessionCookie.
	SessionCookieName *string

	// The maximum duration of the authentication session, in seconds. The default is
	// 604800 seconds (7 days).
	SessionTimeout *int64

	// Indicates whether to use the existing client secret when modifying a rule. If
	// you are creating a rule, you can omit this parameter or set it to false.
	UseExistingClientSecret *bool
	// contains filtered or unexported fields
}

type AvailabilityZone struct {

	// [Network Load Balancers] If you need static IP addresses for your load
	// balancer, you can specify one Elastic IP address per Availability Zone when you
	// create an internal-facing load balancer. For internal load balancers, you can
	// specify a private IP address from the IPv4 range of the subnet.
	LoadBalancerAddresses []LoadBalancerAddress

	// [Application Load Balancers on Outposts] The ID of the Outpost.
	OutpostId *string

	// The ID of the subnet. You can specify one subnet per Availability Zone.
	SubnetId *string

	// The name of the Availability Zone.
	ZoneName *string
	// contains filtered or unexported fields
}

type AvailabilityZoneNotSupportedException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type CaCertificatesBundleNotFoundException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type Certificate struct {

	// The Amazon Resource Name (ARN) of the certificate.
	CertificateArn *string

	// Indicates whether the certificate is the default certificate. Do not set this
	// value when specifying a certificate as an input. This value is not included in
	// the output when describing a listener, but is included when describing listener
	// certificates.
	IsDefault *bool
	// contains filtered or unexported fields
}

type CertificateNotFoundException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type Cipher struct {

	// The name of the cipher.
	Name *string

	// The priority of the cipher.
	Priority *int32
	// contains filtered or unexported fields
}

type DescribeTargetHealthInputIncludeEnum string

type DescribeTrustStoreRevocation struct {

	// The number of revoked certificates.
	NumberOfRevokedEntries *int64

	// The revocation ID of a revocation file in use.
	RevocationId *int64

	// The type of revocation file.
	RevocationType RevocationType

	// The Amazon Resource Name (ARN) of the trust store.
	TrustStoreArn *string
	// contains filtered or unexported fields
}

type DuplicateListenerException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type DuplicateLoadBalancerNameException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type DuplicateTagKeysException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type DuplicateTargetGroupNameException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type DuplicateTrustStoreNameException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type EnforceSecurityGroupInboundRulesOnPrivateLinkTrafficEnum string

type FixedResponseActionConfig struct {

	// The HTTP response code (2XX, 4XX, or 5XX).
	//
	// This member is required.
	StatusCode *string

	// The content type. Valid Values: text/plain | text/css | text/html |
	// application/javascript | application/json
	ContentType *string

	// The message.
	MessageBody *string
	// contains filtered or unexported fields
}

type ForwardActionConfig struct {

	// The target group stickiness for the rule.
	TargetGroupStickinessConfig *TargetGroupStickinessConfig

	// The target groups. For Network Load Balancers, you can specify a single target
	// group.
	TargetGroups []TargetGroupTuple
	// contains filtered or unexported fields
}

type HealthUnavailableException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type HostHeaderConditionConfig struct {

	// The host names. The maximum size of each name is 128 characters. The comparison
	// is case insensitive. The following wildcard characters are supported: * (matches
	// 0 or more characters) and ? (matches exactly 1 character). If you specify
	// multiple strings, the condition is satisfied if one of the strings matches the
	// host name.
	Values []string
	// contains filtered or unexported fields
}

type HttpHeaderConditionConfig struct {

	// The name of the HTTP header field. The maximum size is 40 characters. The
	// header name is case insensitive. The allowed characters are specified by RFC
	// 7230. Wildcards are not supported. You can't use an HTTP header condition to
	// specify the host header. Use HostHeaderConditionConfig to specify a host header
	// condition.
	HttpHeaderName *string

	// The strings to compare against the value of the HTTP header. The maximum size
	// of each string is 128 characters. The comparison strings are case insensitive.
	// The following wildcard characters are supported: * (matches 0 or more
	// characters) and ? (matches exactly 1 character). If the same header appears
	// multiple times in the request, we search them in order until a match is found.
	// If you specify multiple strings, the condition is satisfied if one of the
	// strings matches the value of the HTTP header. To require that all of the strings
	// are a match, create one condition per string.
	Values []string
	// contains filtered or unexported fields
}

type HttpRequestMethodConditionConfig struct {

	// The name of the request method. The maximum size is 40 characters. The allowed
	// characters are A-Z, hyphen (-), and underscore (_). The comparison is case
	// sensitive. Wildcards are not supported; therefore, the method name must be an
	// exact match. If you specify multiple strings, the condition is satisfied if one
	// of the strings matches the HTTP request method. We recommend that you route GET
	// and HEAD requests in the same way, because the response to a HEAD request may be
	// cached.
	Values []string
	// contains filtered or unexported fields
}

type IncompatibleProtocolsException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type InvalidCaCertificatesBundleException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type InvalidConfigurationRequestException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type InvalidLoadBalancerActionException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type InvalidRevocationContentException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type InvalidSchemeException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type InvalidSecurityGroupException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type InvalidSubnetException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type InvalidTargetException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type IpAddressType string

type Limit struct {

	// The maximum value of the limit.
	Max *string

	// The name of the limit. The possible values are:
	//   - application-load-balancers
	//   - condition-values-per-alb-rule
	//   - condition-wildcards-per-alb-rule
	//   - gateway-load-balancers
	//   - gateway-load-balancers-per-vpc
	//   - geneve-target-groups
	//   - listeners-per-application-load-balancer
	//   - listeners-per-network-load-balancer
	//   - network-load-balancers
	//   - rules-per-application-load-balancer
	//   - target-groups
	//   - target-groups-per-action-on-application-load-balancer
	//   - target-groups-per-action-on-network-load-balancer
	//   - target-groups-per-application-load-balancer
	//   - targets-per-application-load-balancer
	//   - targets-per-availability-zone-per-gateway-load-balancer
	//   - targets-per-availability-zone-per-network-load-balancer
	//   - targets-per-network-load-balancer
	Name *string
	// contains filtered or unexported fields
}

type Listener struct {

	// [TLS listener] The name of the Application-Layer Protocol Negotiation (ALPN)
	// policy.
	AlpnPolicy []string

	// [HTTPS or TLS listener] The default certificate for the listener.
	Certificates []Certificate

	// The default actions for the listener.
	DefaultActions []Action

	// The Amazon Resource Name (ARN) of the listener.
	ListenerArn *string

	// The Amazon Resource Name (ARN) of the load balancer.
	LoadBalancerArn *string

	// The mutual authentication configuration information.
	MutualAuthentication *MutualAuthenticationAttributes

	// The port on which the load balancer is listening.
	Port *int32

	// The protocol for connections from clients to the load balancer.
	Protocol ProtocolEnum

	// [HTTPS or TLS listener] The security policy that defines which protocols and
	// ciphers are supported.
	SslPolicy *string
	// contains filtered or unexported fields
}

type ListenerNotFoundException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type LoadBalancer struct {

	// The subnets for the load balancer.
	AvailabilityZones []AvailabilityZone

	// The ID of the Amazon Route 53 hosted zone associated with the load balancer.
	CanonicalHostedZoneId *string

	// The date and time the load balancer was created.
	CreatedTime *time.Time

	// [Application Load Balancers on Outposts] The ID of the customer-owned address
	// pool.
	CustomerOwnedIpv4Pool *string

	// The public DNS name of the load balancer.
	DNSName *string

	// Indicates whether to evaluate inbound security group rules for traffic sent to
	// a Network Load Balancer through Amazon Web Services PrivateLink.
	EnforceSecurityGroupInboundRulesOnPrivateLinkTraffic *string

	// The type of IP addresses used by the subnets for your load balancer. The
	// possible values are ipv4 (for IPv4 addresses) and dualstack (for IPv4 and IPv6
	// addresses).
	IpAddressType IpAddressType

	// The Amazon Resource Name (ARN) of the load balancer.
	LoadBalancerArn *string

	// The name of the load balancer.
	LoadBalancerName *string

	// The nodes of an Internet-facing load balancer have public IP addresses. The DNS
	// name of an Internet-facing load balancer is publicly resolvable to the public IP
	// addresses of the nodes. Therefore, Internet-facing load balancers can route
	// requests from clients over the internet. The nodes of an internal load balancer
	// have only private IP addresses. The DNS name of an internal load balancer is
	// publicly resolvable to the private IP addresses of the nodes. Therefore,
	// internal load balancers can route requests only from clients with access to the
	// VPC for the load balancer.
	Scheme LoadBalancerSchemeEnum

	// The IDs of the security groups for the load balancer.
	SecurityGroups []string

	// The state of the load balancer.
	State *LoadBalancerState

	// The type of load balancer.
	Type LoadBalancerTypeEnum

	// The ID of the VPC for the load balancer.
	VpcId *string
	// contains filtered or unexported fields
}

type LoadBalancerAddress struct {

	// [Network Load Balancers] The allocation ID of the Elastic IP address for an
	// internal-facing load balancer.
	AllocationId *string

	// [Network Load Balancers] The IPv6 address.
	IPv6Address *string

	// The static IP address.
	IpAddress *string

	// [Network Load Balancers] The private IPv4 address for an internal load balancer.
	PrivateIPv4Address *string
	// contains filtered or unexported fields
}

type LoadBalancerAttribute struct {

	// The name of the attribute. The following attributes are supported by all load
	// balancers:
	//   - deletion_protection.enabled - Indicates whether deletion protection is
	//   enabled. The value is true or false . The default is false .
	//   - load_balancing.cross_zone.enabled - Indicates whether cross-zone load
	//   balancing is enabled. The possible values are true and false . The default for
	//   Network Load Balancers and Gateway Load Balancers is false . The default for
	//   Application Load Balancers is true , and cannot be changed.
	// The following attributes are supported by both Application Load Balancers and
	// Network Load Balancers:
	//   - access_logs.s3.enabled - Indicates whether access logs are enabled. The
	//   value is true or false . The default is false .
	//   - access_logs.s3.bucket - The name of the S3 bucket for the access logs. This
	//   attribute is required if access logs are enabled. The bucket must exist in the
	//   same region as the load balancer and have a bucket policy that grants Elastic
	//   Load Balancing permissions to write to the bucket.
	//   - access_logs.s3.prefix - The prefix for the location in the S3 bucket for the
	//   access logs.
	//   - ipv6.deny_all_igw_traffic - Blocks internet gateway (IGW) access to the load
	//   balancer. It is set to false for internet-facing load balancers and true for
	//   internal load balancers, preventing unintended access to your internal load
	//   balancer through an internet gateway.
	// The following attributes are supported by only Application Load Balancers:
	//   - idle_timeout.timeout_seconds - The idle timeout value, in seconds. The valid
	//   range is 1-4000 seconds. The default is 60 seconds.
	//   - client_keep_alive.seconds - The client keep alive value, in seconds. The
	//   valid range is 60-604800 seconds. The default is 3600 seconds.
	//   - connection_logs.s3.enabled - Indicates whether connection logs are enabled.
	//   The value is true or false . The default is false .
	//   - connection_logs.s3.bucket - The name of the S3 bucket for the connection
	//   logs. This attribute is required if connection logs are enabled. The bucket must
	//   exist in the same region as the load balancer and have a bucket policy that
	//   grants Elastic Load Balancing permissions to write to the bucket.
	//   - connection_logs.s3.prefix - The prefix for the location in the S3 bucket for
	//   the connection logs.
	//   - routing.http.desync_mitigation_mode - Determines how the load balancer
	//   handles requests that might pose a security risk to your application. The
	//   possible values are monitor , defensive , and strictest . The default is
	//   defensive .
	//   - routing.http.drop_invalid_header_fields.enabled - Indicates whether HTTP
	//   headers with invalid header fields are removed by the load balancer ( true )
	//   or routed to targets ( false ). The default is false .
	//   - routing.http.preserve_host_header.enabled - Indicates whether the
	//   Application Load Balancer should preserve the Host header in the HTTP request
	//   and send it to the target without any change. The possible values are true and
	//   false . The default is false .
	//   - routing.http.x_amzn_tls_version_and_cipher_suite.enabled - Indicates whether
	//   the two headers ( x-amzn-tls-version and x-amzn-tls-cipher-suite ), which
	//   contain information about the negotiated TLS version and cipher suite, are added
	//   to the client request before sending it to the target. The x-amzn-tls-version
	//   header has information about the TLS protocol version negotiated with the
	//   client, and the x-amzn-tls-cipher-suite header has information about the
	//   cipher suite negotiated with the client. Both headers are in OpenSSL format. The
	//   possible values for the attribute are true and false . The default is false .
	//   - routing.http.xff_client_port.enabled - Indicates whether the X-Forwarded-For
	//   header should preserve the source port that the client used to connect to the
	//   load balancer. The possible values are true and false . The default is false .
	//   - routing.http.xff_header_processing.mode - Enables you to modify, preserve,
	//   or remove the X-Forwarded-For header in the HTTP request before the
	//   Application Load Balancer sends the request to the target. The possible values
	//   are append , preserve , and remove . The default is append .
	//   - If the value is append , the Application Load Balancer adds the client IP
	//   address (of the last hop) to the X-Forwarded-For header in the HTTP request
	//   before it sends it to targets.
	//   - If the value is preserve the Application Load Balancer preserves the
	//   X-Forwarded-For header in the HTTP request, and sends it to targets without
	//   any change.
	//   - If the value is remove , the Application Load Balancer removes the
	//   X-Forwarded-For header in the HTTP request before it sends it to targets.
	//   - routing.http2.enabled - Indicates whether HTTP/2 is enabled. The possible
	//   values are true and false . The default is true . Elastic Load Balancing
	//   requires that message header names contain only alphanumeric characters and
	//   hyphens.
	//   - waf.fail_open.enabled - Indicates whether to allow a WAF-enabled load
	//   balancer to route requests to targets if it is unable to forward the request to
	//   Amazon Web Services WAF. The possible values are true and false . The default
	//   is false .
	// The following attributes are supported by only Network Load Balancers:
	//   - dns_record.client_routing_policy - Indicates how traffic is distributed
	//   among the load balancer Availability Zones. The possible values are
	//   availability_zone_affinity with 100 percent zonal affinity,
	//   partial_availability_zone_affinity with 85 percent zonal affinity, and
	//   any_availability_zone with 0 percent zonal affinity.
	Key *string

	// The value of the attribute.
	Value *string
	// contains filtered or unexported fields
}

type LoadBalancerNotFoundException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type LoadBalancerSchemeEnum string

type LoadBalancerState struct {

	// The state code. The initial state of the load balancer is provisioning . After
	// the load balancer is fully set up and ready to route traffic, its state is
	// active . If load balancer is routing traffic but does not have the resources it
	// needs to scale, its state is active_impaired . If the load balancer could not be
	// set up, its state is failed .
	Code LoadBalancerStateEnum

	// A description of the state.
	Reason *string
	// contains filtered or unexported fields
}

type LoadBalancerStateEnum string

type LoadBalancerTypeEnum string

type Matcher struct {

	// You can specify values between 0 and 99. You can specify multiple values (for
	// example, "0,1") or a range of values (for example, "0-5"). The default value is
	// 12.
	GrpcCode *string

	// For Application Load Balancers, you can specify values between 200 and 499,
	// with the default value being 200. You can specify multiple values (for example,
	// "200,202") or a range of values (for example, "200-299"). For Network Load
	// Balancers, you can specify values between 200 and 599, with the default value
	// being 200-399. You can specify multiple values (for example, "200,202") or a
	// range of values (for example, "200-299"). For Gateway Load Balancers, this must
	// be "200–399". Note that when using shorthand syntax, some values such as commas
	// need to be escaped.
	HttpCode *string
	// contains filtered or unexported fields
}

type MitigationInEffectEnum string

type MutualAuthenticationAttributes struct {

	// Indicates whether expired client certificates are ignored.
	IgnoreClientCertificateExpiry *bool

	// The client certificate handling method. Options are off , passthrough or verify
	// . The default value is off .
	Mode *string

	// The Amazon Resource Name (ARN) of the trust store.
	TrustStoreArn *string
	// contains filtered or unexported fields
}

type OperationNotPermittedException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type PathPatternConditionConfig struct {

	// The path patterns to compare against the request URL. The maximum size of each
	// string is 128 characters. The comparison is case sensitive. The following
	// wildcard characters are supported: * (matches 0 or more characters) and ?
	// (matches exactly 1 character). If you specify multiple strings, the condition is
	// satisfied if one of them matches the request URL. The path pattern is compared
	// only to the path of the URL, not to its query string. To compare against the
	// query string, use QueryStringConditionConfig .
	Values []string
	// contains filtered or unexported fields
}

type PriorityInUseException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type ProtocolEnum string

type QueryStringConditionConfig struct {

	// The key/value pairs or values to find in the query string. The maximum size of
	// each string is 128 characters. The comparison is case insensitive. The following
	// wildcard characters are supported: * (matches 0 or more characters) and ?
	// (matches exactly 1 character). To search for a literal '*' or '?' character in a
	// query string, you must escape these characters in Values using a '\' character.
	// If you specify multiple key/value pairs or values, the condition is satisfied if
	// one of them is found in the query string.
	Values []QueryStringKeyValuePair
	// contains filtered or unexported fields
}

type QueryStringKeyValuePair struct {

	// The key. You can omit the key.
	Key *string

	// The value.
	Value *string
	// contains filtered or unexported fields
}

type RedirectActionConfig struct {

	// The HTTP redirect code. The redirect is either permanent (HTTP 301) or
	// temporary (HTTP 302).
	//
	// This member is required.
	StatusCode RedirectActionStatusCodeEnum

	// The hostname. This component is not percent-encoded. The hostname can contain
	// #{host}.
	Host *string

	// The absolute path, starting with the leading "/". This component is not
	// percent-encoded. The path can contain #{host}, #{path}, and #{port}.
	Path *string

	// The port. You can specify a value from 1 to 65535 or #{port}.
	Port *string

	// The protocol. You can specify HTTP, HTTPS, or #{protocol}. You can redirect
	// HTTP to HTTP, HTTP to HTTPS, and HTTPS to HTTPS. You cannot redirect HTTPS to
	// HTTP.
	Protocol *string

	// The query parameters, URL-encoded when necessary, but not percent-encoded. Do
	// not include the leading "?", as it is automatically added. You can specify any
	// of the reserved keywords.
	Query *string
	// contains filtered or unexported fields
}

type RedirectActionStatusCodeEnum string

type ResourceInUseException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type RevocationContent struct {

	// The type of revocation file.
	RevocationType RevocationType

	// The Amazon S3 bucket for the revocation file.
	S3Bucket *string

	// The Amazon S3 path for the revocation file.
	S3Key *string

	// The Amazon S3 object version of the revocation file.
	S3ObjectVersion *string
	// contains filtered or unexported fields
}

type RevocationContentNotFoundException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type RevocationIdNotFoundException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type RevocationType string

type Rule struct {

	// The actions. Each rule must include exactly one of the following types of
	// actions: forward , redirect , or fixed-response , and it must be the last action
	// to be performed.
	Actions []Action

	// The conditions. Each rule can include zero or one of the following conditions:
	// http-request-method , host-header , path-pattern , and source-ip , and zero or
	// more of the following conditions: http-header and query-string .
	Conditions []RuleCondition

	// Indicates whether this is the default rule.
	IsDefault *bool

	// The priority.
	Priority *string

	// The Amazon Resource Name (ARN) of the rule.
	RuleArn *string
	// contains filtered or unexported fields
}

type RuleCondition struct {

	// The field in the HTTP request. The following are the possible values:
	//   - http-header
	//   - http-request-method
	//   - host-header
	//   - path-pattern
	//   - query-string
	//   - source-ip
	Field *string

	// Information for a host header condition. Specify only when Field is host-header .
	HostHeaderConfig *HostHeaderConditionConfig

	// Information for an HTTP header condition. Specify only when Field is http-header
	// .
	HttpHeaderConfig *HttpHeaderConditionConfig

	// Information for an HTTP method condition. Specify only when Field is
	// http-request-method .
	HttpRequestMethodConfig *HttpRequestMethodConditionConfig

	// Information for a path pattern condition. Specify only when Field is
	// path-pattern .
	PathPatternConfig *PathPatternConditionConfig

	// Information for a query string condition. Specify only when Field is
	// query-string .
	QueryStringConfig *QueryStringConditionConfig

	// Information for a source IP condition. Specify only when Field is source-ip .
	SourceIpConfig *SourceIpConditionConfig

	// The condition value. Specify only when Field is host-header or path-pattern .
	// Alternatively, to specify multiple host names or multiple path patterns, use
	// HostHeaderConfig or PathPatternConfig . If Field is host-header and you are not
	// using HostHeaderConfig , you can specify a single host name (for example,
	// my.example.com) in Values . A host name is case insensitive, can be up to 128
	// characters in length, and can contain any of the following characters.
	//   - A-Z, a-z, 0-9
	//   - - .
	//   - * (matches 0 or more characters)
	//   - ? (matches exactly 1 character)
	// If Field is path-pattern and you are not using PathPatternConfig , you can
	// specify a single path pattern (for example, /img/*) in Values . A path pattern
	// is case-sensitive, can be up to 128 characters in length, and can contain any of
	// the following characters.
	//   - A-Z, a-z, 0-9
	//   - _ - . $ / ~ " ' @ : +
	//   - & (using &)
	//   - * (matches 0 or more characters)
	//   - ? (matches exactly 1 character)
	Values []string
	// contains filtered or unexported fields
}

type RuleNotFoundException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type RulePriorityPair struct {

	// The rule priority.
	Priority *int32

	// The Amazon Resource Name (ARN) of the rule.
	RuleArn *string
	// contains filtered or unexported fields
}

type SSLPolicyNotFoundException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type SourceIpConditionConfig struct {

	// The source IP addresses, in CIDR format. You can use both IPv4 and IPv6
	// addresses. Wildcards are not supported. If you specify multiple addresses, the
	// condition is satisfied if the source IP address of the request matches one of
	// the CIDR blocks. This condition is not satisfied by the addresses in the
	// X-Forwarded-For header. To search for addresses in the X-Forwarded-For header,
	// use HttpHeaderConditionConfig . The total number of values must be less than, or
	// equal to five.
	Values []string
	// contains filtered or unexported fields
}

type SslPolicy struct {

	// The ciphers.
	Ciphers []Cipher

	// The name of the policy.
	Name *string

	// The protocols.
	SslProtocols []string

	// The supported load balancers.
	SupportedLoadBalancerTypes []string
	// contains filtered or unexported fields
}

type SubnetMapping struct {

	// [Network Load Balancers] The allocation ID of the Elastic IP address for an
	// internet-facing load balancer.
	AllocationId *string

	// [Network Load Balancers] The IPv6 address.
	IPv6Address *string

	// [Network Load Balancers] The private IPv4 address for an internal load balancer.
	PrivateIPv4Address *string

	// The ID of the subnet.
	SubnetId *string
	// contains filtered or unexported fields
}

type SubnetNotFoundException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type Tag struct {

	// The key of the tag.
	//
	// This member is required.
	Key *string

	// The value of the tag.
	Value *string
	// contains filtered or unexported fields
}

type TagDescription struct {

	// The Amazon Resource Name (ARN) of the resource.
	ResourceArn *string

	// Information about the tags.
	Tags []Tag
	// contains filtered or unexported fields
}

type TargetDescription struct {

	// The ID of the target. If the target type of the target group is instance ,
	// specify an instance ID. If the target type is ip , specify an IP address. If the
	// target type is lambda , specify the ARN of the Lambda function. If the target
	// type is alb , specify the ARN of the Application Load Balancer target.
	//
	// This member is required.
	Id *string

	// An Availability Zone or all . This determines whether the target receives
	// traffic from the load balancer nodes in the specified Availability Zone or from
	// all enabled Availability Zones for the load balancer. For Application Load
	// Balancer target groups, the specified Availability Zone value is only applicable
	// when cross-zone load balancing is off. Otherwise the parameter is ignored and
	// treated as all . This parameter is not supported if the target type of the
	// target group is instance or alb . If the target type is ip and the IP address
	// is in a subnet of the VPC for the target group, the Availability Zone is
	// automatically detected and this parameter is optional. If the IP address is
	// outside the VPC, this parameter is required. For Application Load Balancer
	// target groups with cross-zone load balancing off, if the target type is ip and
	// the IP address is outside of the VPC for the target group, this should be an
	// Availability Zone inside the VPC for the target group. If the target type is
	// lambda , this parameter is optional and the only supported value is all .
	AvailabilityZone *string

	// The port on which the target is listening. If the target group protocol is
	// GENEVE, the supported port is 6081. If the target type is alb , the targeted
	// Application Load Balancer must have at least one listener whose port matches the
	// target group port. This parameter is not used if the target is a Lambda
	// function.
	Port *int32
	// contains filtered or unexported fields
}

type TargetGroup struct {

	// Indicates whether health checks are enabled.
	HealthCheckEnabled *bool

	// The approximate amount of time, in seconds, between health checks of an
	// individual target.
	HealthCheckIntervalSeconds *int32

	// The destination for health checks on the targets.
	HealthCheckPath *string

	// The port to use to connect with the target.
	HealthCheckPort *string

	// The protocol to use to connect with the target. The GENEVE, TLS, UDP, and
	// TCP_UDP protocols are not supported for health checks.
	HealthCheckProtocol ProtocolEnum

	// The amount of time, in seconds, during which no response means a failed health
	// check.
	HealthCheckTimeoutSeconds *int32

	// The number of consecutive health checks successes required before considering
	// an unhealthy target healthy.
	HealthyThresholdCount *int32

	// The type of IP address used for this target group. The possible values are ipv4
	// and ipv6 . This is an optional parameter. If not specified, the IP address type
	// defaults to ipv4 .
	IpAddressType TargetGroupIpAddressTypeEnum

	// The Amazon Resource Name (ARN) of the load balancer that routes traffic to this
	// target group. You can use each target group with only one load balancer.
	LoadBalancerArns []string

	// The HTTP or gRPC codes to use when checking for a successful response from a
	// target.
	Matcher *Matcher

	// The port on which the targets are listening. This parameter is not used if the
	// target is a Lambda function.
	Port *int32

	// The protocol to use for routing traffic to the targets.
	Protocol ProtocolEnum

	// [HTTP/HTTPS protocol] The protocol version. The possible values are GRPC , HTTP1
	// , and HTTP2 .
	ProtocolVersion *string

	// The Amazon Resource Name (ARN) of the target group.
	TargetGroupArn *string

	// The name of the target group.
	TargetGroupName *string

	// The type of target that you must specify when registering targets with this
	// target group. The possible values are instance (register targets by instance
	// ID), ip (register targets by IP address), lambda (register a single Lambda
	// function as a target), or alb (register a single Application Load Balancer as a
	// target).
	TargetType TargetTypeEnum

	// The number of consecutive health check failures required before considering the
	// target unhealthy.
	UnhealthyThresholdCount *int32

	// The ID of the VPC for the targets.
	VpcId *string
	// contains filtered or unexported fields
}

type TargetGroupAssociationLimitException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type TargetGroupAttribute struct {

	// The name of the attribute. The following attributes are supported by all load
	// balancers:
	//   - deregistration_delay.timeout_seconds - The amount of time, in seconds, for
	//   Elastic Load Balancing to wait before changing the state of a deregistering
	//   target from draining to unused . The range is 0-3600 seconds. The default
	//   value is 300 seconds. If the target is a Lambda function, this attribute is not
	//   supported.
	//   - stickiness.enabled - Indicates whether target stickiness is enabled. The
	//   value is true or false . The default is false .
	//   - stickiness.type - Indicates the type of stickiness. The possible values are:
	//   - lb_cookie and app_cookie for Application Load Balancers.
	//   - source_ip for Network Load Balancers.
	//   - source_ip_dest_ip and source_ip_dest_ip_proto for Gateway Load Balancers.
	// The following attributes are supported by Application Load Balancers and
	// Network Load Balancers:
	//   - load_balancing.cross_zone.enabled - Indicates whether cross zone load
	//   balancing is enabled. The value is true , false or
	//   use_load_balancer_configuration . The default is
	//   use_load_balancer_configuration .
	//   - target_group_health.dns_failover.minimum_healthy_targets.count - The minimum
	//   number of targets that must be healthy. If the number of healthy targets is
	//   below this value, mark the zone as unhealthy in DNS, so that traffic is routed
	//   only to healthy zones. The possible values are off or an integer from 1 to the
	//   maximum number of targets. The default is off .
	//   - target_group_health.dns_failover.minimum_healthy_targets.percentage - The
	//   minimum percentage of targets that must be healthy. If the percentage of healthy
	//   targets is below this value, mark the zone as unhealthy in DNS, so that traffic
	//   is routed only to healthy zones. The possible values are off or an integer
	//   from 1 to 100. The default is off .
	//   - target_group_health.unhealthy_state_routing.minimum_healthy_targets.count -
	//   The minimum number of targets that must be healthy. If the number of healthy
	//   targets is below this value, send traffic to all targets, including unhealthy
	//   targets. The possible values are 1 to the maximum number of targets. The default
	//   is 1.
	//   -
	//   target_group_health.unhealthy_state_routing.minimum_healthy_targets.percentage
	//   - The minimum percentage of targets that must be healthy. If the percentage of
	//   healthy targets is below this value, send traffic to all targets, including
	//   unhealthy targets. The possible values are off or an integer from 1 to 100.
	//   The default is off .
	// The following attributes are supported only if the load balancer is an
	// Application Load Balancer and the target is an instance or an IP address:
	//   - load_balancing.algorithm.type - The load balancing algorithm determines how
	//   the load balancer selects targets when routing requests. The value is
	//   round_robin , least_outstanding_requests , or weighted_random . The default is
	//   round_robin .
	//   - load_balancing.algorithm.anomaly_mitigation - Only available when
	//   load_balancing.algorithm.type is weighted_random . Indicates whether anomaly
	//   mitigation is enabled. The value is on or off . The default is off .
	//   - slow_start.duration_seconds - The time period, in seconds, during which a
	//   newly registered target receives an increasing share of the traffic to the
	//   target group. After this time period ends, the target receives its full share of
	//   traffic. The range is 30-900 seconds (15 minutes). The default is 0 seconds
	//   (disabled).
	//   - stickiness.app_cookie.cookie_name - Indicates the name of the
	//   application-based cookie. Names that start with the following prefixes are not
	//   allowed: AWSALB , AWSALBAPP , and AWSALBTG ; they're reserved for use by the
	//   load balancer.
	//   - stickiness.app_cookie.duration_seconds - The time period, in seconds, during
	//   which requests from a client should be routed to the same target. After this
	//   time period expires, the application-based cookie is considered stale. The range
	//   is 1 second to 1 week (604800 seconds). The default value is 1 day (86400
	//   seconds).
	//   - stickiness.lb_cookie.duration_seconds - The time period, in seconds, during
	//   which requests from a client should be routed to the same target. After this
	//   time period expires, the load balancer-generated cookie is considered stale. The
	//   range is 1 second to 1 week (604800 seconds). The default value is 1 day (86400
	//   seconds).
	// The following attribute is supported only if the load balancer is an
	// Application Load Balancer and the target is a Lambda function:
	//   - lambda.multi_value_headers.enabled - Indicates whether the request and
	//   response headers that are exchanged between the load balancer and the Lambda
	//   function include arrays of values or strings. The value is true or false . The
	//   default is false . If the value is false and the request contains a duplicate
	//   header field name or query parameter key, the load balancer uses the last value
	//   sent by the client.
	// The following attributes are supported only by Network Load Balancers:
	//   - deregistration_delay.connection_termination.enabled - Indicates whether the
	//   load balancer terminates connections at the end of the deregistration timeout.
	//   The value is true or false . For new UDP/TCP_UDP target groups the default is
	//   true . Otherwise, the default is false .
	//   - preserve_client_ip.enabled - Indicates whether client IP preservation is
	//   enabled. The value is true or false . The default is disabled if the target
	//   group type is IP address and the target group protocol is TCP or TLS. Otherwise,
	//   the default is enabled. Client IP preservation cannot be disabled for UDP and
	//   TCP_UDP target groups.
	//   - proxy_protocol_v2.enabled - Indicates whether Proxy Protocol version 2 is
	//   enabled. The value is true or false . The default is false .
	//   - target_health_state.unhealthy.connection_termination.enabled - Indicates
	//   whether the load balancer terminates connections to unhealthy targets. The value
	//   is true or false . The default is true .
	//   - target_health_state.unhealthy.draining_interval_seconds - The amount of time
	//   for Elastic Load Balancing to wait before changing the state of an unhealthy
	//   target from unhealthy.draining to unhealthy . The range is 0-360000 seconds.
	//   The default value is 0 seconds. Note: This attribute can only be configured when
	//   target_health_state.unhealthy.connection_termination.enabled is false .
	// The following attributes are supported only by Gateway Load Balancers:
	//   - target_failover.on_deregistration - Indicates how the Gateway Load Balancer
	//   handles existing flows when a target is deregistered. The possible values are
	//   rebalance and no_rebalance . The default is no_rebalance . The two attributes (
	//   target_failover.on_deregistration and target_failover.on_unhealthy ) can't be
	//   set independently. The value you set for both attributes must be the same.
	//   - target_failover.on_unhealthy - Indicates how the Gateway Load Balancer
	//   handles existing flows when a target is unhealthy. The possible values are
	//   rebalance and no_rebalance . The default is no_rebalance . The two attributes (
	//   target_failover.on_deregistration and target_failover.on_unhealthy ) cannot be
	//   set independently. The value you set for both attributes must be the same.
	Key *string

	// The value of the attribute.
	Value *string
	// contains filtered or unexported fields
}

type TargetGroupIpAddressTypeEnum string

type TargetGroupNotFoundException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type TargetGroupStickinessConfig struct {

	// The time period, in seconds, during which requests from a client should be
	// routed to the same target group. The range is 1-604800 seconds (7 days).
	DurationSeconds *int32

	// Indicates whether target group stickiness is enabled.
	Enabled *bool
	// contains filtered or unexported fields
}

type TargetGroupTuple struct {

	// The Amazon Resource Name (ARN) of the target group.
	TargetGroupArn *string

	// The weight. The range is 0 to 999.
	Weight *int32
	// contains filtered or unexported fields
}

type TargetHealth struct {

	// A description of the target health that provides additional details. If the
	// state is healthy , a description is not provided.
	Description *string

	// The reason code. If the target state is healthy , a reason code is not provided.
	// If the target state is initial , the reason code can be one of the following
	// values:
	//   - Elb.RegistrationInProgress - The target is in the process of being
	//   registered with the load balancer.
	//   - Elb.InitialHealthChecking - The load balancer is still sending the target
	//   the minimum number of health checks required to determine its health status.
	// If the target state is unhealthy , the reason code can be one of the following
	// values:
	//   - Target.ResponseCodeMismatch - The health checks did not return an expected
	//   HTTP code. Applies only to Application Load Balancers and Gateway Load
	//   Balancers.
	//   - Target.Timeout - The health check requests timed out. Applies only to
	//   Application Load Balancers and Gateway Load Balancers.
	//   - Target.FailedHealthChecks - The load balancer received an error while
	//   establishing a connection to the target or the target response was malformed.
	//   - Elb.InternalError - The health checks failed due to an internal error.
	//   Applies only to Application Load Balancers.
	// If the target state is unused , the reason code can be one of the following
	// values:
	//   - Target.NotRegistered - The target is not registered with the target group.
	//   - Target.NotInUse - The target group is not used by any load balancer or the
	//   target is in an Availability Zone that is not enabled for its load balancer.
	//   - Target.InvalidState - The target is in the stopped or terminated state.
	//   - Target.IpUnusable - The target IP address is reserved for use by a load
	//   balancer.
	// If the target state is draining , the reason code can be the following value:
	//   - Target.DeregistrationInProgress - The target is in the process of being
	//   deregistered and the deregistration delay period has not expired.
	// If the target state is unavailable , the reason code can be the following value:
	//   - Target.HealthCheckDisabled - Health checks are disabled for the target
	//   group. Applies only to Application Load Balancers.
	//   - Elb.InternalError - Target health is unavailable due to an internal error.
	//   Applies only to Network Load Balancers.
	Reason TargetHealthReasonEnum

	// The state of the target.
	State TargetHealthStateEnum
	// contains filtered or unexported fields
}

type TargetHealthDescription struct {

	// The anomaly detection result for the target. If no anomalies were detected, the
	// result is normal . If anomalies were detected, the result is anomalous .
	AnomalyDetection *AnomalyDetection

	// The port to use to connect with the target.
	HealthCheckPort *string

	// The description of the target.
	Target *TargetDescription

	// The health information for the target.
	TargetHealth *TargetHealth
	// contains filtered or unexported fields
}

type TargetHealthReasonEnum string

type TargetHealthStateEnum string

type TargetTypeEnum string

type TooManyActionsException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type TooManyCertificatesException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type TooManyListenersException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type TooManyLoadBalancersException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type TooManyRegistrationsForTargetIdException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type TooManyRulesException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type TooManyTagsException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type TooManyTargetGroupsException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type TooManyTargetsException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type TooManyTrustStoreRevocationEntriesException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type TooManyTrustStoresException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type TooManyUniqueTargetGroupsPerLoadBalancerException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type TrustStore struct {

	// The name of the trust store.
	Name *string

	// The number of ca certificates in the trust store.
	NumberOfCaCertificates *int32

	// The current status of the trust store.
	Status TrustStoreStatus

	// The number of revoked certificates in the trust store.
	TotalRevokedEntries *int64

	// The Amazon Resource Name (ARN) of the trust store.
	TrustStoreArn *string
	// contains filtered or unexported fields
}

type TrustStoreAssociation struct {

	// The Amazon Resource Name (ARN) of the resource.
	ResourceArn *string
	// contains filtered or unexported fields
}

type TrustStoreInUseException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type TrustStoreNotFoundException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type TrustStoreNotReadyException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

type TrustStoreRevocation struct {

	// The number of revoked certificates.
	NumberOfRevokedEntries *int64

	// The revocation ID of the revocation file.
	RevocationId *int64

	// The type of revocation file.
	RevocationType RevocationType

	// The Amazon Resource Name (ARN) of the trust store.
	TrustStoreArn *string
	// contains filtered or unexported fields
}

type TrustStoreStatus string

type UnsupportedProtocolException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}