cid

package
v0.1.0 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Dec 19, 2023 License: MIT Imports: 11 Imported by: 0

Documentation

Overview

Package cid implements the Content-IDentifiers specification (https://github.com/ipld/cid) in Go. CIDs are self-describing content-addressed identifiers useful for distributed information systems. CIDs are used in the DeP2P (https://dep2p.io) project ecosystem.

CIDs have two major versions. A CIDv0 corresponds to a multihash of type DagProtobuf, is deprecated and exists for compatibility reasons. Usually, CIDv1 should be used.

A CIDv1 has four parts:

<cidv1> ::= <multibase-prefix><cid-version><multicodec-packed-content-type><multihash-content-address>

As shown above, the CID implementation relies heavily on Multiformats, particularly Multibase (https://github.com/multiformats/go-multibase), Multicodec (https://github.com/multiformats/multicodec) and Multihash implementations (https://github.com/multiformats/go-multihash).

Index

Constants

View Source
const (
	// common ones
	Raw         = 0x55
	DagProtobuf = 0x70   // https://ipld.io/docs/codecs/known/dag-pb/
	DagCBOR     = 0x71   // https://ipld.io/docs/codecs/known/dag-cbor/
	DagJSON     = 0x0129 // https://ipld.io/docs/codecs/known/dag-json/
	DeP2PKey    = 0x72   // https://github.com/dep2p/specs/blob/master/peer-ids/peer-ids.md#peer-ids

	// other
	GitRaw                = 0x78
	DagJOSE               = 0x85 // https://ipld.io/specs/codecs/dag-jose/spec/
	EthBlock              = 0x90
	EthBlockList          = 0x91
	EthTxTrie             = 0x92
	EthTx                 = 0x93
	EthTxReceiptTrie      = 0x94
	EthTxReceipt          = 0x95
	EthStateTrie          = 0x96
	EthAccountSnapshot    = 0x97
	EthStorageTrie        = 0x98
	BitcoinBlock          = 0xb0
	BitcoinTx             = 0xb1
	ZcashBlock            = 0xc0
	ZcashTx               = 0xc1
	DecredBlock           = 0xe0
	DecredTx              = 0xe1
	DashBlock             = 0xf0
	DashTx                = 0xf1
	FilCommitmentUnsealed = 0xf101
	FilCommitmentSealed   = 0xf102
)

Consts below are DEPRECATED and left only for legacy reasons: Modern code should use consts from go-multicodec instead: <https://github.com/multiformats/go-multicodec>

View Source
const UnsupportedVersionString = "<unsupported cid version>"

UnsupportedVersionString just holds an error message

Variables

View Source
var (
	// ErrCidTooShort means that the cid passed to decode was not long
	// enough to be a valid Cid
	ErrCidTooShort = ErrInvalidCid{errors.New("cid too short")}

	// ErrInvalidEncoding means that selected encoding is not supported
	// by this Cid version
	ErrInvalidEncoding = errors.New("invalid base encoding")
)
View Source
var Undef = Cid{}

Undef can be used to represent a nil or undefined Cid, using Cid{} directly is also acceptable.

Functions

func ExtractEncoding

func ExtractEncoding(v string) (mbase.Encoding, error)

Extract the encoding from a Cid. If Decode on the same string did not return an error neither will this function.

Types

type Builder

type Builder interface {
	Sum(data []byte) (Cid, error)
	GetCodec() uint64
	WithCodec(uint64) Builder
}

type Cid

type Cid struct {
	// contains filtered or unexported fields
}

Cid represents a self-describing content addressed identifier. It is formed by a Version, a Codec (which indicates a multicodec-packed content type) and a Multihash.

func Cast

func Cast(data []byte) (Cid, error)

Cast takes a Cid data slice, parses it and returns a Cid. For CidV1, the data buffer is in the form:

<version><codec-type><multihash>

CidV0 are also supported. In particular, data buffers starting with length 34 bytes, which starts with bytes [18,32...] are considered binary multihashes.

Please use decode when parsing a regular Cid string, as Cast does not expect multibase-encoded data. Cast accepts the output of Cid.Bytes().

func CidFromBytes

func CidFromBytes(data []byte) (int, Cid, error)

func CidFromReader

func CidFromReader(r io.Reader) (int, Cid, error)

CidFromReader reads a precise number of bytes for a CID from a given reader. It returns the number of bytes read, the CID, and any error encountered. The number of bytes read is accurate even if a non-nil error is returned.

It's recommended to supply a reader that buffers and implements io.ByteReader, as CidFromReader has to do many single-byte reads to decode varints. If the argument only implements io.Reader, single-byte Read calls are used instead.

If the Reader is found to yield zero bytes, an io.EOF error is returned directly, in all other error cases, an ErrInvalidCid, wrapping the original error, is returned.

func Decode

func Decode(v string) (Cid, error)

Decode parses a Cid-encoded string and returns a Cid object. For CidV1, a Cid-encoded string is primarily a multibase string:

<multibase-type-code><base-encoded-string>

The base-encoded string represents a:

<version><codec-type><multihash>

Decode will also detect and parse CidV0 strings. Strings starting with "Qm" are considered CidV0 and treated directly as B58-encoded multihashes.

func MustParse

func MustParse(v interface{}) Cid

MustParse calls Parse but will panic on error.

func NewCidV0

func NewCidV0(mhash mh.Multihash) Cid

NewCidV0 returns a Cid-wrapped multihash. They exist to allow DeP2P to work with Cids while keeping compatibility with the plain-multihash format used used in DeP2P. NewCidV1 should be used preferentially.

Panics if the multihash isn't sha2-256.

func NewCidV1

func NewCidV1(codecType uint64, mhash mh.Multihash) Cid

NewCidV1 returns a new Cid using the given multicodec-packed content type.

Panics if the multihash is invalid.

func Parse

func Parse(v interface{}) (Cid, error)

Parse is a short-hand function to perform Decode, Cast etc... on a generic interface{} type.

func (Cid) ByteLen

func (c Cid) ByteLen() int

ByteLen returns the length of the CID in bytes. It's equivalent to `len(c.Bytes())`, but works without an allocation, and should therefore be preferred.

(See also the WriteTo method for other important operations that work without allocation.)

func (Cid) Bytes

func (c Cid) Bytes() []byte

Bytes returns the byte representation of a Cid. The output of bytes can be parsed back into a Cid with Cast().

If c.Defined() == false, it return a nil slice and may not be parsable with Cast().

func (Cid) Defined

func (c Cid) Defined() bool

Defined returns true if a Cid is defined Calling any other methods on an undefined Cid will result in undefined behavior.

func (Cid) Encode

func (c Cid) Encode(base mbase.Encoder) string

Encode return the string representation of a Cid in a given base when applicable. Version 0 Cid's are always in Base58 as they do not take a multibase prefix.

func (Cid) Equals

func (c Cid) Equals(o Cid) bool

Equals checks that two Cids are the same. In order for two Cids to be considered equal, the Version, the Codec and the Multihash must match.

func (Cid) Hash

func (c Cid) Hash() mh.Multihash

Hash returns the multihash contained by a Cid.

func (Cid) KeyString

func (c Cid) KeyString() string

KeyString returns the binary representation of the Cid as a string

func (Cid) Loggable

func (c Cid) Loggable() map[string]interface{}

Loggable returns a Loggable (as defined by

func (Cid) MarshalBinary

func (c Cid) MarshalBinary() ([]byte, error)

MarshalBinary is equivalent to Bytes(). It implements the encoding.BinaryMarshaler interface.

func (Cid) MarshalJSON

func (c Cid) MarshalJSON() ([]byte, error)

MarshalJSON procudes a JSON representation of a Cid, which looks as follows:

{ "/": "<cid-string>" }

Note that this formatting comes from the IPLD specification (https://github.com/ipld/specs/tree/master/ipld)

func (Cid) MarshalText

func (c Cid) MarshalText() ([]byte, error)

MarshalText is equivalent to String(). It implements the encoding.TextMarshaler interface.

func (Cid) Prefix

func (c Cid) Prefix() Prefix

Prefix builds and returns a Prefix out of a Cid.

func (Cid) String

func (c Cid) String() string

String returns the default string representation of a Cid. Currently, Base32 is used for CIDV1 as the encoding for the multibase string, Base58 is used for CIDV0.

func (Cid) StringOfBase

func (c Cid) StringOfBase(base mbase.Encoding) (string, error)

String returns the string representation of a Cid encoded is selected base

func (Cid) Type

func (c Cid) Type() uint64

Type returns the multicodec-packed content type of a Cid.

func (*Cid) UnmarshalBinary

func (c *Cid) UnmarshalBinary(data []byte) error

UnmarshalBinary is equivalent to Cast(). It implements the encoding.BinaryUnmarshaler interface.

func (*Cid) UnmarshalJSON

func (c *Cid) UnmarshalJSON(b []byte) error

UnmarshalJSON parses the JSON representation of a Cid.

func (*Cid) UnmarshalText

func (c *Cid) UnmarshalText(text []byte) error

UnmarshalText is equivalent to Decode(). It implements the encoding.TextUnmarshaler interface.

func (Cid) Version

func (c Cid) Version() uint64

Version returns the Cid version.

func (Cid) WriteBytes

func (c Cid) WriteBytes(w io.Writer) (int, error)

WriteBytes writes the CID bytes to the given writer. This method works without incurring any allocation.

(See also the ByteLen method for other important operations that work without allocation.)

type ErrInvalidCid

type ErrInvalidCid struct {
	Err error
}

ErrInvalidCid is an error that indicates that a CID is invalid.

func (ErrInvalidCid) Error

func (e ErrInvalidCid) Error() string

func (ErrInvalidCid) Is

func (e ErrInvalidCid) Is(err error) bool

func (ErrInvalidCid) Unwrap

func (e ErrInvalidCid) Unwrap() error

type Prefix

type Prefix struct {
	Version  uint64
	Codec    uint64
	MhType   uint64
	MhLength int
}

Prefix represents all the metadata of a Cid, that is, the Version, the Codec, the Multihash type and the Multihash length. It does not contains any actual content information. NOTE: The use -1 in MhLength to mean default length is deprecated,

use the V0Builder or V1Builder structures instead

func NewPrefixV0

func NewPrefixV0(mhType uint64) Prefix

NewPrefixV0 returns a CIDv0 prefix with the specified multihash type. DEPRECATED: Use V0Builder

func NewPrefixV1

func NewPrefixV1(codecType uint64, mhType uint64) Prefix

NewPrefixV1 returns a CIDv1 prefix with the specified codec and multihash type. DEPRECATED: Use V1Builder

func PrefixFromBytes

func PrefixFromBytes(buf []byte) (Prefix, error)

PrefixFromBytes parses a Prefix-byte representation onto a Prefix.

func (Prefix) Bytes

func (p Prefix) Bytes() []byte

Bytes returns a byte representation of a Prefix. It looks like:

<version><codec><mh-type><mh-length>

func (Prefix) GetCodec

func (p Prefix) GetCodec() uint64

func (Prefix) Sum

func (p Prefix) Sum(data []byte) (Cid, error)

Sum uses the information in a prefix to perform a multihash.Sum() and return a newly constructed Cid with the resulting multihash.

func (Prefix) WithCodec

func (p Prefix) WithCodec(c uint64) Builder

type Set

type Set struct {
	// contains filtered or unexported fields
}

Set is a implementation of a set of Cids, that is, a structure to which holds a single copy of every Cids that is added to it.

func NewSet

func NewSet() *Set

NewSet initializes and returns a new Set.

func (*Set) Add

func (s *Set) Add(c Cid)

Add puts a Cid in the Set.

func (*Set) ForEach

func (s *Set) ForEach(f func(c Cid) error) error

ForEach allows to run a custom function on each Cid in the set.

func (*Set) Has

func (s *Set) Has(c Cid) bool

Has returns if the Set contains a given Cid.

func (*Set) Keys

func (s *Set) Keys() []Cid

Keys returns the Cids in the set.

func (*Set) Len

func (s *Set) Len() int

Len returns how many elements the Set has.

func (*Set) Remove

func (s *Set) Remove(c Cid)

Remove deletes a Cid from the Set.

func (*Set) Visit

func (s *Set) Visit(c Cid) bool

Visit adds a Cid to the set only if it is not in it already.

type V0Builder

type V0Builder struct{}

func (V0Builder) GetCodec

func (p V0Builder) GetCodec() uint64

func (V0Builder) Sum

func (p V0Builder) Sum(data []byte) (Cid, error)

func (V0Builder) WithCodec

func (p V0Builder) WithCodec(c uint64) Builder

type V1Builder

type V1Builder struct {
	Codec    uint64
	MhType   uint64
	MhLength int // MhLength <= 0 means the default length
}

func (V1Builder) GetCodec

func (p V1Builder) GetCodec() uint64

func (V1Builder) Sum

func (p V1Builder) Sum(data []byte) (Cid, error)

func (V1Builder) WithCodec

func (p V1Builder) WithCodec(c uint64) Builder

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL