message

package
v0.0.3 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Feb 7, 2021 License: ISC Imports: 15 Imported by: 1

Documentation

Overview

Copyright (c) 2020-2021 The bitcoinpay developers

Index

Constants

View Source 
const (
	CmdVersion    = "version"
	CmdVerAck     = "verack"
	CmdGetAddr    = "getaddr"
	CmdAddr       = "addr"
	CmdReject     = "reject"
	CmdPing       = "ping"
	CmdPong       = "pong"
	CmdInv        = "inv"
	CmdBlock      = "block"
	CmdGetBlocks  = "getblocks"
	CmdHeaders    = "headers"
	CmdGetHeaders = "getheaders"
	CmdTx         = "tx"
	CmdGetData    = "getdata"
	CmdNotFound   = "notfound"

	CmdMiningState    = "miningstate"
	CmdGetMiningState = "getminings"

	CmdMemPool      = "mempool"
	CmdGraphState   = "graphstate"
	CmdSyncResult   = "syncresult"
	CmdSyncDAG      = "syncdag"
	CmdSyncPoint    = "syncpoint"
	CmdSendHeaders  = "sendheaders"
	CmdFeeFilter    = "feefilter"
	CmdGetCFilter   = "getcfilter"
	CmdGetCFHeaders = "getcfheaders"
	CmdGetCFTypes   = "getcftypes"
	CmdCFilter      = "cfilter"
	CmdCFHeaders    = "cfheaders"
	CmdCFTypes      = "cftypes"
)

Commands used in message headers which describe the type of message.

View Source 
const CommandSize = 12

CommandSize is the fixed size of all commands in the common message header. Shorter commands must be zero padded.

View Source 
const MaxAddrPerMsg = 1000

MaxAddrPerMsg is the maximum number of addresses that can be in a single bitcoin addr message (MsgAddr).

View Source 
const MaxBlockHeadersPerMsg = 2000

MaxBlockHeadersPerMsg is the maximum number of block headers that can be in a single headers message.

View Source 
const MaxBlockLocatorsPerMsg = 500

MaxBlockLocatorsPerMsg is the maximum number of block locator hashes allowed per message.

View Source 
const MaxBlocksPerMsg = 500

MaxBlocksPerMsg is the maximum number of blocks allowed per message.

View Source 
const (
	// MaxInvPerMsg is the maximum number of inventory vectors that can be in a
	// single inv message.
	MaxInvPerMsg = 50000
)
View Source 
const MaxMSBlocksAtHeadPerMsg = 8

MaxMSBlocksAtHeadPerMsg is the maximum number of block hashes allowed per message.

View Source 
const MaxMessagePayload = (1024 * 1024 * 32) // 32MB

MaxMessagePayload is the maximum bytes a message can be regardless of other individual limits imposed by messages themselves.

View Source 
const MaxUserAgentLen = 256

MaxUserAgentLen is the maximum allowed length for the user agent field in a version message (MsgVersion).

View Source 
const MaxVarIntPayload = 9

MaxVarIntPayload is the maximum payload size for a variable length integer.

View Source 
const MessageHeaderSize = 24

MessageHeaderSize is the number of bytes in a message header. bitcoinpay network (magic) 4 bytes + command 12 bytes + payload length 4 bytes + checksum 4 bytes.

Variables

View Source 
var UUID = uuid.NewV4()

UUID for peer

Functions

func Summary 

func Summary(msg Message) string

message.Summary returns a human-readable string which summarizes a message. Not all messages have or need a summary. This is used for debug logging.

func ToHex 

func ToHex(msg Message) (string, error)

func WriteMessage 

func WriteMessage(w io.Writer, msg Message, pver uint32, net protocol.Network) error

WriteMessage writes a Message to w including the necessary header information. This function is the same as WriteMessageN except it doesn't doesn't return the number of bytes written. This function is mainly provided for backwards compatibility with the original API, but it's also useful for callers that don't care about byte counts.

func WriteMessageN 

func WriteMessageN(w io.Writer, msg Message, pver uint32, net protocol.Network) (int, error)

WriteMessageN writes a Message to w including the necessary header information and returns the number of bytes written. This function is the same as WriteMessage except it also returns the number of bytes written.

Types

type InvType 

type InvType uint32

InvType represents the allowed types of inventory vectors. See InvVect. 

const (
	InvTypeError         InvType = 0
	InvTypeTx            InvType = 1
	InvTypeBlock         InvType = 2
	InvTypeFilteredBlock InvType = 3
	InvTypeAiringBlock   InvType = 4
)

These constants define the various supported inventory vector types.

func (InvType) String 

func (invtype InvType) String() string

String returns the InvType in human-readable form.

type InvVect 

type InvVect struct {
	Type InvType   // Type of data
	Hash hash.Hash // Hash of the data
}

InvVect defines a inventory vector which is used to describe data, as specified by the Type field, that a peer wants, has, or does not have to another peer.

func NewInvVect 

func NewInvVect(typ InvType, hash *hash.Hash) *InvVect

NewInvVect returns a new InvVect using the provided type and hash.

type Message 

type Message interface {
	Decode(io.Reader, uint32) error
	Encode(io.Writer, uint32) error
	Command() string
	MaxPayloadLength(uint32) uint32
}

Message is an interface that describes a Bitcoinpay message. A type that implements Message has complete control over the representation of its data and may therefore contain additional or fewer fields than those which are used directly in the protocol encoded message.

func ReadMessage 

func ReadMessage(r io.Reader, pver uint32, net protocol.Network) (Message, []byte, error)

ReadMessage reads, validates, and parses the next Message from r for the provided protocol version and network. It returns the parsed Message and raw bytes which comprise the message. This function only differs from ReadMessageN in that it doesn't return the number of bytes read. This function is mainly provided for backwards compatibility with the original API, but it's also useful for callers that don't care about byte counts.

func ReadMessageN 

func ReadMessageN(r io.Reader, pver uint32, net protocol.Network) (int, Message, []byte, error)

ReadMessageN reads, validates, and parses the next Message from r for the provided protocol version and network. It returns the number of bytes read in addition to the parsed Message and raw bytes which comprise the message. This function is the same as ReadMessage except it also returns the number of bytes read.

type MessageError 

type MessageError struct {
	Func        string // Function name
	Description string // Human readable description of the issue
}

MessageError describes an issue with a message. An example of some potential issues are messages from the wrong network, invalid commands, mismatched checksums, and exceeding max payloads.

This provides a mechanism for the caller to type assert the error to differentiate between general io errors such as io.EOF and issues that resulted from malformed messages.

func (*MessageError) Error 

func (e *MessageError) Error() string

Error satisfies the error interface and prints human-readable errors.

type MsgAddr 

type MsgAddr struct {
	AddrList []*types.NetAddress
}

MsgAddr implements the Message interface and represents a bitcoin addr message. It is used to provide a list of known active peers on the network. An active peer is considered one that has transmitted a message within the last 3 hours. Nodes which have not transmitted in that time frame should be forgotten. Each message is limited to a maximum number of addresses, which is currently 1000. As a result, multiple messages must be used to relay the full list.

Use the AddAddress function to build up the list of known addresses when sending an addr message to another peer.

func NewMsgAddr 

func NewMsgAddr() *MsgAddr

NewMsgAddr returns a new bitcoin addr message that conforms to the Message interface. See MsgAddr for details.

func (*MsgAddr) AddAddress 

func (msg *MsgAddr) AddAddress(na *types.NetAddress) error

AddAddress adds a known active peer to the message.

func (*MsgAddr) AddAddresses 

func (msg *MsgAddr) AddAddresses(netAddrs ...*types.NetAddress) error

AddAddresses adds multiple known active peers to the message.

func (*MsgAddr) ClearAddresses 

func (msg *MsgAddr) ClearAddresses()

ClearAddresses removes all addresses from the message.

func (*MsgAddr) Command 

func (msg *MsgAddr) Command() string

Command returns the protocol command string for the message. This is part of the Message interface implementation.

func (*MsgAddr) Decode 

func (msg *MsgAddr) Decode(r io.Reader, pver uint32) error

Decode decodes r into the receiver. This is part of the Message interface implementation.

func (*MsgAddr) Encode 

func (msg *MsgAddr) Encode(w io.Writer, pver uint32) error

ncode encodes the receiver to w. This is part of the Message interface implementation.

func (*MsgAddr) MaxPayloadLength 

func (msg *MsgAddr) MaxPayloadLength(pver uint32) uint32

MaxPayloadLength returns the maximum length the payload can be for the receiver. This is part of the Message interface implementation.

type MsgBlock 

type MsgBlock struct {
	*types.Block
}

MsgBlock implements the Message interface and represents a block message. It is used to deliver block and transaction information in response to a getdata message (MsgGetData) for a given block hash.

func NewMsgBlock 

func NewMsgBlock(blockHeader *types.BlockHeader) *MsgBlock

NewMsgBlock returns a new block message that conforms to the Message interface. See MsgBlock for details.

func (*MsgBlock) AddTransaction 

func (msg *MsgBlock) AddTransaction(tx *MsgTx) error

AddTransaction adds a transaction to the message.

func (*MsgBlock) Bytes 

func (msg *MsgBlock) Bytes() ([]byte, error)

Bytes returns the serialized form of the block in bytes.

func (*MsgBlock) ClearTransactions 

func (msg *MsgBlock) ClearTransactions()

ClearTransactions removes all transactions from the message.

func (*MsgBlock) Command 

func (msg *MsgBlock) Command() string

Command returns the protocol command string for the message. This is part of the Message interface implementation.

func (*MsgBlock) Decode 

func (msg *MsgBlock) Decode(r io.Reader, pver uint32) error

Decode decodes r using the protocol encoding into the receiver. This is part of the Message interface implementation. See Deserialize for decoding blocks stored to disk, such as in a database, as opposed to decoding blocks from the wire.

func (*MsgBlock) Encode 

func (msg *MsgBlock) Encode(w io.Writer, pver uint32) error

Encode encodes the receiver to w using the protocol encoding. This is part of the Message interface implementation. See Serialize for encoding blocks to be stored to disk, such as in a database, as opposed to encoding blocks for the wire.

func (*MsgBlock) FromBytes 

func (msg *MsgBlock) FromBytes(b []byte) error

FromBytes deserializes a transaction byte slice.

func (*MsgBlock) MaxPayloadLength 

func (msg *MsgBlock) MaxPayloadLength(pver uint32) uint32

MaxPayloadLength returns the maximum length the payload can be for the receiver. This is part of the Message interface implementation.

func (*MsgBlock) SerializeSize 

func (msg *MsgBlock) SerializeSize() int

SerializeSize returns the number of bytes it would take to serialize the the block.

type MsgFeeFilter 

type MsgFeeFilter struct {
	MinFee int64
}

func NewMsgFeeFilter 

func NewMsgFeeFilter(minfee int64) *MsgFeeFilter

func (*MsgFeeFilter) Command 

func (msg *MsgFeeFilter) Command() string

func (*MsgFeeFilter) Decode 

func (msg *MsgFeeFilter) Decode(r io.Reader, pver uint32) error

func (*MsgFeeFilter) Encode 

func (msg *MsgFeeFilter) Encode(w io.Writer, pver uint32) error

func (*MsgFeeFilter) MaxPayloadLength 

func (msg *MsgFeeFilter) MaxPayloadLength(pver uint32) uint32

type MsgGetAddr 

type MsgGetAddr struct{}

MsgGetAddr implements the Message interface and represents a GetAddr message. It is used to request a list of known active peers on the network from a peer to help identify potential nodes. The list is returned via one or more addr messages (MsgAddr).

This message has no payload.

func NewMsgGetAddr 

func NewMsgGetAddr() *MsgGetAddr

NewMsgGetAddr returns a new GetAddr message that conforms to the Message interface. See MsgGetAddr for details.

func (*MsgGetAddr) Command 

func (msg *MsgGetAddr) Command() string

Command returns the protocol command string for the message. This is part of the Message interface implementation.

func (*MsgGetAddr) Decode 

func (msg *MsgGetAddr) Decode(r io.Reader, pver uint32) error

Decode decodes r into the receiver. This is part of the Message interface implementation.

func (*MsgGetAddr) Encode 

func (msg *MsgGetAddr) Encode(w io.Writer, pver uint32) error

Encode encodes the receiver to w. This is part of the Message interface implementation.

func (*MsgGetAddr) MaxPayloadLength 

func (msg *MsgGetAddr) MaxPayloadLength(pver uint32) uint32

MaxPayloadLength returns the maximum length the payload can be for the receiver. This is part of the Message interface implementation.

type MsgGetBlocks 

type MsgGetBlocks struct {
	ProtocolVersion    uint32
	BlockLocatorHashes []*hash.Hash
	GS                 *blockdag.GraphState
}

MsgGetBlocks implements the Message interface and represents a getblocks message. It is used to request a list of blocks starting after the last known hash in the slice of block locator hashes. The list is returned via an inv message (MsgInv) and is limited by a specific hash to stop at or the maximum number of blocks per message.

Set the HashStop field to the hash at which to stop and use AddBlockLocatorHash to build up the list of block locator hashes.

The algorithm for building the block locator hashes should be to add the hashes in reverse order until you reach the genesis block. In order to keep the list of locator hashes to a reasonable number of entries, first add the most recent 10 block hashes, then double the step each loop iteration to exponentially decrease the number of hashes the further away from head and closer to the genesis block you get.

func NewMsgGetBlocks 

func NewMsgGetBlocks(gs *blockdag.GraphState) *MsgGetBlocks

NewMsgGetBlocks returns a new getblocks message that conforms to the Message interface using the passed parameters and defaults for the remaining fields.

func (*MsgGetBlocks) AddBlockLocatorHash 

func (msg *MsgGetBlocks) AddBlockLocatorHash(hash *hash.Hash) error

AddBlockLocatorHash adds a new block locator hash to the message.

func (*MsgGetBlocks) Command 

func (msg *MsgGetBlocks) Command() string

Command returns the protocol command string for the message. This is part of the Message interface implementation.

func (*MsgGetBlocks) Decode 

func (msg *MsgGetBlocks) Decode(r io.Reader, pver uint32) error

Decode decodes r using the protocol encoding into the receiver. This is part of the Message interface implementation.

func (*MsgGetBlocks) Encode 

func (msg *MsgGetBlocks) Encode(w io.Writer, pver uint32) error

Encode encodes the receiver to w using the protocol encoding. This is part of the Message interface implementation.

func (*MsgGetBlocks) MaxPayloadLength 

func (msg *MsgGetBlocks) MaxPayloadLength(pver uint32) uint32

MaxPayloadLength returns the maximum length the payload can be for the receiver. This is part of the Message interface implementation.

type MsgGetData 

type MsgGetData struct {
	InvList []*InvVect
}

MsgGetData implements the Message interface and represents a getdata message. It is used to request data such as blocks and transactions from another peer. It should be used in response to the inv (MsgInv) message to request the actual data referenced by each inventory vector the receiving peer doesn't already have. Each message is limited to a maximum number of inventory vectors, which is currently 50,000. As a result, multiple messages must be used to request larger amounts of data.

Use the AddInvVect function to build up the list of inventory vectors when sending a getdata message to another peer.

func NewMsgGetData 

func NewMsgGetData() *MsgGetData

NewMsgGetData returns a new getdata message that conforms to the Message interface. See MsgGetData for details.

func NewMsgGetDataSizeHint 

func NewMsgGetDataSizeHint(sizeHint uint) *MsgGetData

NewMsgGetDataSizeHint returns a new getdata message that conforms to the Message interface. See MsgGetData for details. This function differs from NewMsgGetData in that it allows a default allocation size for the backing array which houses the inventory vector list. This allows callers who know in advance how large the inventory list will grow to avoid the overhead of growing the internal backing array several times when appending large amounts of inventory vectors with AddInvVect. Note that the specified hint is just that - a hint that is used for the default allocation size. Adding more (or less) inventory vectors will still work properly. The size hint is limited to MaxInvPerMsg.

func (*MsgGetData) AddInvVect 

func (msg *MsgGetData) AddInvVect(iv *InvVect) error

AddInvVect adds an inventory vector to the message.

func (*MsgGetData) Command 

func (msg *MsgGetData) Command() string

Command returns the protocol command string for the message. This is part of the Message interface implementation.

func (*MsgGetData) Decode 

func (msg *MsgGetData) Decode(r io.Reader, pver uint32) error

BtcDecode decodes r using the protocol encoding into the receiver. This is part of the Message interface implementation.

func (*MsgGetData) Encode 

func (msg *MsgGetData) Encode(w io.Writer, pver uint32) error

BtcEncode encodes the receiver to w using the protocol encoding. This is part of the Message interface implementation.

func (*MsgGetData) MaxPayloadLength 

func (msg *MsgGetData) MaxPayloadLength(pver uint32) uint32

MaxPayloadLength returns the maximum length the payload can be for the receiver. This is part of the Message interface implementation.

type MsgGetHeaders 

type MsgGetHeaders struct {
	ProtocolVersion    uint32
	BlockLocatorHashes []*hash.Hash
	GS                 *blockdag.GraphState
}

MsgGetHeaders implements the Message interface and represents a getheaders message. It is used to request a list of block headers for blocks starting after the last known hash in the slice of block locator hashes. The list is returned via a headers message (MsgHeaders) and is limited by a specific hash to stop at or the maximum number of block headers per message,

Set the HashStop field to the hash at which to stop and use AddBlockLocatorHash to build up the list of block locator hashes.

The algorithm for building the block locator hashes should be to add the hashes in reverse order until you reach the genesis block. In order to keep the list of locator hashes to a resonable number of entries, first add the most recent 10 block hashes, then double the step each loop iteration to exponentially decrease the number of hashes the further away from head and closer to the genesis block you get.

func NewMsgGetHeaders 

func NewMsgGetHeaders(gs *blockdag.GraphState) *MsgGetHeaders

NewMsgGetHeaders returns a new getheaders message that conforms to the Message interface. See MsgGetHeaders for details.

func (*MsgGetHeaders) AddBlockLocatorHash 

func (msg *MsgGetHeaders) AddBlockLocatorHash(hash *hash.Hash) error

AddBlockLocatorHash adds a new block locator hash to the message.

func (*MsgGetHeaders) Command 

func (msg *MsgGetHeaders) Command() string

Command returns the protocol command string for the message. This is part of the Message interface implementation.

func (*MsgGetHeaders) Decode 

func (msg *MsgGetHeaders) Decode(r io.Reader, pver uint32) error

Decode decodes r using the protocol encoding into the receiver. This is part of the Message interface implementation.

func (*MsgGetHeaders) Encode 

func (msg *MsgGetHeaders) Encode(w io.Writer, pver uint32) error

Encode encodes the receiver to w using the protocol encoding. This is part of the Message interface implementation.

func (*MsgGetHeaders) MaxPayloadLength 

func (msg *MsgGetHeaders) MaxPayloadLength(pver uint32) uint32

MaxPayloadLength returns the maximum length the payload can be for the receiver. This is part of the Message interface implementation.

func (*MsgGetHeaders) String 

func (msg *MsgGetHeaders) String() string

type MsgGetMiningState 

type MsgGetMiningState struct{}

MsgGetMiningState implements the Message interface and represents a getminingstate message. It is used to request the current mining state from a peer.

func NewMsgGetMiningState 

func NewMsgGetMiningState() *MsgGetMiningState

NewMsgGetMiningState returns a new getminingstate message that conforms to the Message interface. See MsgPong for details.

func (*MsgGetMiningState) Command 

func (msg *MsgGetMiningState) Command() string

Command returns the protocol command string for the message. This is part of the Message interface implementation.

func (*MsgGetMiningState) Decode 

func (msg *MsgGetMiningState) Decode(r io.Reader, pver uint32) error

Decode decodes r using the protocol encoding into the receiver. This is part of the Message interface implementation.

func (*MsgGetMiningState) Encode 

func (msg *MsgGetMiningState) Encode(w io.Writer, pver uint32) error

Encode encodes the receiver to w using the protocol encoding. This is part of the Message interface implementation.

func (*MsgGetMiningState) MaxPayloadLength 

func (msg *MsgGetMiningState) MaxPayloadLength(pver uint32) uint32

MaxPayloadLength returns the maximum length the payload can be for the receiver. This is part of the Message interface implementation.

type MsgGraphState 

type MsgGraphState struct {
	GS *blockdag.GraphState
}

func NewMsgGraphState 

func NewMsgGraphState(gs *blockdag.GraphState) *MsgGraphState

func (*MsgGraphState) Command 

func (msg *MsgGraphState) Command() string

func (*MsgGraphState) Decode 

func (msg *MsgGraphState) Decode(r io.Reader, pver uint32) error

func (*MsgGraphState) Encode 

func (msg *MsgGraphState) Encode(w io.Writer, pver uint32) error

func (*MsgGraphState) MaxPayloadLength 

func (msg *MsgGraphState) MaxPayloadLength(pver uint32) uint32

type MsgHeaders 

type MsgHeaders struct {
	Headers []*types.BlockHeader
	GS      *blockdag.GraphState
}

MsgHeaders implements the Message interface and represents a headers message. It is used to deliver block header information in response to a getheaders message (MsgGetHeaders). The maximum number of block headers per message is currently 2000. See MsgGetHeaders for details on requesting the headers.

func NewMsgHeaders 

func NewMsgHeaders(gs *blockdag.GraphState) *MsgHeaders

NewMsgHeaders returns a new headers message that conforms to the Message interface. See MsgHeaders for details.

func (*MsgHeaders) AddBlockHeader 

func (msg *MsgHeaders) AddBlockHeader(bh *types.BlockHeader) error

AddBlockHeader adds a new block header to the message.

func (*MsgHeaders) Command 

func (msg *MsgHeaders) Command() string

Command returns the protocol command string for the message. This is part of the Message interface implementation.

func (*MsgHeaders) Decode 

func (msg *MsgHeaders) Decode(r io.Reader, pver uint32) error

Decode decodes r using the protocol encoding into the receiver. This is part of the Message interface implementation.

func (*MsgHeaders) Encode 

func (msg *MsgHeaders) Encode(w io.Writer, pver uint32) error

Encode encodes the receiver to w using the protocol encoding. This is part of the Message interface implementation.

func (*MsgHeaders) MaxPayloadLength 

func (msg *MsgHeaders) MaxPayloadLength(pver uint32) uint32

MaxPayloadLength returns the maximum length the payload can be for the receiver. This is part of the Message interface implementation.

func (*MsgHeaders) String 

func (msg *MsgHeaders) String() string

type MsgInv 

type MsgInv struct {
	GS      *blockdag.GraphState
	InvList []*InvVect
}

MsgInv implements the Message interface and represents a inv message. It is used to advertise a peer's known data such as blocks and transactions through inventory vectors. It may be sent unsolicited to inform other peers of the data or in response to a getblocks message (MsgGetBlocks). Each message is limited to a maximum number of inventory vectors, which is currently 50,000.

Use the AddInvVect function to build up the list of inventory vectors when sending an inv message to another peer.

func NewMsgInv 

func NewMsgInv() *MsgInv

NewMsgInv returns a new inv message that conforms to the Message interface. See MsgInv for details.

func NewMsgInvSizeHint 

func NewMsgInvSizeHint(sizeHint uint) *MsgInv

NewMsgInvSizeHint returns a new inv message that conforms to the Message interface. See MsgInv for details. This function differs from NewMsgInv in that it allows a default allocation size for the backing array which houses the inventory vector list. This allows callers who know in advance how large the inventory list will grow to avoid the overhead of growing the internal backing array several times when appending large amounts of inventory vectors with AddInvVect. Note that the specified hint is just that - a hint that is used for the default allocation size. Adding more (or less) inventory vectors will still work properly. The size hint is limited to MaxInvPerMsg.

func (*MsgInv) AddInvVect 

func (msg *MsgInv) AddInvVect(iv *InvVect) error

AddInvVect adds an inventory vector to the message.

func (*MsgInv) Command 

func (msg *MsgInv) Command() string

Command returns the protocol command string for the message. This is part of the Message interface implementation.

func (*MsgInv) Decode 

func (msg *MsgInv) Decode(r io.Reader, pver uint32) error

Decode decodes r using the protocol encoding into the receiver. This is part of the Message interface implementation.

func (*MsgInv) Encode 

func (msg *MsgInv) Encode(w io.Writer, pver uint32) error

Encode encodes the receiver to w using the protocol encoding. This is part of the Message interface implementation.

func (*MsgInv) MaxPayloadLength 

func (msg *MsgInv) MaxPayloadLength(pver uint32) uint32

MaxPayloadLength returns the maximum length the payload can be for the receiver. This is part of the Message interface implementation.

type MsgMemPool 

type MsgMemPool struct{}

func NewMsgMemPool 

func NewMsgMemPool() *MsgMemPool

func (*MsgMemPool) Command 

func (msg *MsgMemPool) Command() string

func (*MsgMemPool) Decode 

func (msg *MsgMemPool) Decode(r io.Reader, pver uint32) error

func (*MsgMemPool) Encode 

func (msg *MsgMemPool) Encode(w io.Writer, pver uint32) error

func (*MsgMemPool) MaxPayloadLength 

func (msg *MsgMemPool) MaxPayloadLength(pver uint32) uint32

type MsgMiningState 

type MsgMiningState struct {
	Version     uint32
	Height      uint32
	BlockHashes []*hash.Hash
}

MsgMiningState implements the Message interface and represents a mining state message. It is used to request a list of blocks located at the chain tip The list is returned is limited by the maximum number of blocks per message message.

func NewMsgMiningState 

func NewMsgMiningState() *MsgMiningState

NewMsgMiningState returns a new miningstate message that conforms to the Message interface using the defaults for the fields.

func (*MsgMiningState) AddBlockHash 

func (msg *MsgMiningState) AddBlockHash(hash *hash.Hash) error

AddBlockHash adds a new block hash to the message.

func (*MsgMiningState) Command 

func (msg *MsgMiningState) Command() string

Command returns the protocol command string for the message. This is part of the Message interface implementation.

func (*MsgMiningState) Decode 

func (msg *MsgMiningState) Decode(r io.Reader, pver uint32) error

Decode decodes r using the protocol encoding into the receiver. This is part of the Message interface implementation.

func (*MsgMiningState) Encode 

func (msg *MsgMiningState) Encode(w io.Writer, pver uint32) error

Encode encodes the receiver to w using the protocol encoding. This is part of the Message interface implementation.

func (*MsgMiningState) MaxPayloadLength 

func (msg *MsgMiningState) MaxPayloadLength(pver uint32) uint32

MaxPayloadLength returns the maximum length the payload can be for the receiver. This is part of the Message interface implementation.

type MsgNotFound 

type MsgNotFound struct {
	InvList []*InvVect
}

MsgNotFound defines a notfound message which is sent in response to a getdata message if any of the requested data in not available on the peer. Each message is limited to a maximum number of inventory vectors, which is currently 50,000.

Use the AddInvVect function to build up the list of inventory vectors when sending a notfound message to another peer.

func NewMsgNotFound 

func NewMsgNotFound() *MsgNotFound

NewMsgNotFound returns a new notfound message that conforms to the Message interface. See MsgNotFound for details.

func (*MsgNotFound) AddInvVect 

func (msg *MsgNotFound) AddInvVect(iv *InvVect) error

AddInvVect adds an inventory vector to the message.

func (*MsgNotFound) Command 

func (msg *MsgNotFound) Command() string

Command returns the protocol command string for the message. This is part of the Message interface implementation.

func (*MsgNotFound) Decode 

func (msg *MsgNotFound) Decode(r io.Reader, pver uint32) error

Decode decodes r using the protocol encoding into the receiver. This is part of the Message interface implementation.

func (*MsgNotFound) Encode 

func (msg *MsgNotFound) Encode(w io.Writer, pver uint32) error

Encode encodes the receiver to w using the protocol encoding. This is part of the Message interface implementation.

func (*MsgNotFound) MaxPayloadLength 

func (msg *MsgNotFound) MaxPayloadLength(pver uint32) uint32

MaxPayloadLength returns the maximum length the payload can be for the receiver. This is part of the Message interface implementation.

type MsgPing 

type MsgPing struct {
	// Unique value associated with message that is used to identify
	// specific ping message.
	Nonce uint64
}

MsgPing implements the Message interface and represents a ping message.

The payload for this message just consists of a nonce used for identifying it later.

func NewMsgPing 

func NewMsgPing(nonce uint64) *MsgPing

NewMsgPing returns a new ping message that conforms to the Message interface. See MsgPing for details.

func (*MsgPing) Command 

func (msg *MsgPing) Command() string

Command returns the protocol command string for the message. This is part of the Message interface implementation.

func (*MsgPing) Decode 

func (msg *MsgPing) Decode(r io.Reader, pver uint32) error

Decode decodes r using the protocol encoding into the receiver. This is part of the Message interface implementation.

func (*MsgPing) Encode 

func (msg *MsgPing) Encode(w io.Writer, pver uint32) error

Encode encodes the receiver to w using the protocol encoding. This is part of the Message interface implementation.

func (*MsgPing) MaxPayloadLength 

func (msg *MsgPing) MaxPayloadLength(pver uint32) uint32

MaxPayloadLength returns the maximum length the payload can be for the receiver. This is part of the Message interface implementation.

type MsgPong 

type MsgPong struct {
	// Unique value associated with message that is used to identify
	// specific ping message.
	Nonce uint64
}

MsgPong implements the Message interface and represents a pong message which is used primarily to confirm that a connection is still valid in response to a ping message (MsgPing).

func NewMsgPong 

func NewMsgPong(nonce uint64) *MsgPong

NewMsgPong returns a new pong message that conforms to the Message interface. See MsgPong for details.

func (*MsgPong) Command 

func (msg *MsgPong) Command() string

Command returns the protocol command string for the message. This is part of the Message interface implementation.

func (*MsgPong) Decode 

func (msg *MsgPong) Decode(r io.Reader, pver uint32) error

BtcDecode decodes r using the protocol encoding into the receiver. This is part of the Message interface implementation.

func (*MsgPong) Encode 

func (msg *MsgPong) Encode(w io.Writer, pver uint32) error

BtcEncode encodes the receiver to w using the protocol encoding. This is part of the Message interface implementation.

func (*MsgPong) MaxPayloadLength 

func (msg *MsgPong) MaxPayloadLength(pver uint32) uint32

MaxPayloadLength returns the maximum length the payload can be for the receiver. This is part of the Message interface implementation.

type MsgReject 

type MsgReject struct {
	// Cmd is the command for the message which was rejected such as
	// as CmdBlock or CmdTx.  This can be obtained from the Command function
	// of a Message.
	Cmd string

	// RejectCode is a code indicating why the command was rejected.  It
	// is encoded as a uint8 on the wire.
	Code RejectCode

	// Reason is a human-readable string with specific details (over and
	// above the reject code) about why the command was rejected.
	Reason string

	// Hash identifies a specific block or transaction that was rejected
	// and therefore only applies the MsgBlock and MsgTx messages.
	Hash hash.Hash
}

MsgReject implements the Message interface and represents an reject message.

This message was not added until protocol version RejectVersion.

func NewMsgReject 

func NewMsgReject(command string, code RejectCode, reason string) *MsgReject

NewMsgReject returns a new reject message that conforms to the Message interface. See MsgReject for details.

func (*MsgReject) Command 

func (msg *MsgReject) Command() string

Command returns the protocol command string for the message. This is part of the Message interface implementation.

func (*MsgReject) Decode 

func (msg *MsgReject) Decode(r io.Reader, pver uint32) error

Decode decodes r encoding into the receiver. This is part of the Message interface implementation.

func (*MsgReject) Encode 

func (msg *MsgReject) Encode(w io.Writer, pver uint32) error

Encode encodes the receiver to w. This is part of the Message interface implementation.

func (*MsgReject) MaxPayloadLength 

func (msg *MsgReject) MaxPayloadLength(pver uint32) uint32

MaxPayloadLength returns the maximum length the payload can be for the receiver. This is part of the Message interface implementation.

type MsgSyncDAG 

type MsgSyncDAG struct {
	MainLocator []*hash.Hash
	GS          *blockdag.GraphState
}

func NewMsgSyncDAG 

func NewMsgSyncDAG(gs *blockdag.GraphState, locator []*hash.Hash) *MsgSyncDAG

func (*MsgSyncDAG) Command 

func (msg *MsgSyncDAG) Command() string

func (*MsgSyncDAG) Decode 

func (msg *MsgSyncDAG) Decode(r io.Reader, pver uint32) error

func (*MsgSyncDAG) Encode 

func (msg *MsgSyncDAG) Encode(w io.Writer, pver uint32) error

func (*MsgSyncDAG) MaxPayloadLength 

func (msg *MsgSyncDAG) MaxPayloadLength(pver uint32) uint32

type MsgSyncPoint 

type MsgSyncPoint struct {
	SyncPoint *hash.Hash
	GS        *blockdag.GraphState
}

func NewMsgSyncPoint 

func NewMsgSyncPoint(gs *blockdag.GraphState, point *hash.Hash) *MsgSyncPoint

func (*MsgSyncPoint) Command 

func (msg *MsgSyncPoint) Command() string

func (*MsgSyncPoint) Decode 

func (msg *MsgSyncPoint) Decode(r io.Reader, pver uint32) error

func (*MsgSyncPoint) Encode 

func (msg *MsgSyncPoint) Encode(w io.Writer, pver uint32) error

func (*MsgSyncPoint) MaxPayloadLength 

func (msg *MsgSyncPoint) MaxPayloadLength(pver uint32) uint32

type MsgSyncResult 

type MsgSyncResult struct {
	GS   *blockdag.GraphState
	Mode blockdag.SyncMode
}

func NewMsgSyncResult 

func NewMsgSyncResult(gs *blockdag.GraphState, mode blockdag.SyncMode) *MsgSyncResult

func (*MsgSyncResult) Command 

func (msg *MsgSyncResult) Command() string

func (*MsgSyncResult) Decode 

func (msg *MsgSyncResult) Decode(r io.Reader, pver uint32) error

func (*MsgSyncResult) Encode 

func (msg *MsgSyncResult) Encode(w io.Writer, pver uint32) error

func (*MsgSyncResult) MaxPayloadLength 

func (msg *MsgSyncResult) MaxPayloadLength(pver uint32) uint32

type MsgTx 

type MsgTx struct {
	Tx *types.Transaction
}

func (*MsgTx) Command 

func (msg *MsgTx) Command() string

Command returns the protocol command string for the message. This is part of the Message interface implementation.

func (*MsgTx) Decode 

func (msg *MsgTx) Decode(r io.Reader, pver uint32) error

Decode decodes r into the receiver. This is part of the Message interface implementation.

See Deserialize for decoding transactions stored to disk, such as in a database, as opposed to decoding transactions from the wire.

func (*MsgTx) Encode 

func (msg *MsgTx) Encode(w io.Writer, pver uint32) error

Encode encodes the receiver to w. This is part of the Message interface implementation.

See Serialize for encoding transactions to be stored to disk, such as in a database, as opposed to encoding transactions for the wire.

func (*MsgTx) MaxPayloadLength 

func (msg *MsgTx) MaxPayloadLength(pver uint32) uint32

MaxPayloadLength returns the maximum length the payload can be for the receiver. This is part of the Message interface implementation.

type MsgVerAck 

type MsgVerAck struct{}

MsgVerAck defines a Verack message which is used for a peer to acknowledge a version message (MsgVersion) after it has used the information to negotiate parameters.

It implements the Message interface. This message has no payload.

func NewMsgVerAck 

func NewMsgVerAck() *MsgVerAck

NewMsgVerAck returns a new VerAck message that conforms to the Message interface.

func (*MsgVerAck) Command 

func (msg *MsgVerAck) Command() string

Command returns the protocol command string for the message. This is part of the Message interface implementation.

func (*MsgVerAck) Decode 

func (msg *MsgVerAck) Decode(r io.Reader, pver uint32) error

Decode decodes r into the receiver. This is part of the Message interface implementation.

func (*MsgVerAck) Encode 

func (msg *MsgVerAck) Encode(w io.Writer, pver uint32) error

Encode encodes the receiver to w. This is part of the Message interface implementation.

func (*MsgVerAck) MaxPayloadLength 

func (msg *MsgVerAck) MaxPayloadLength(pver uint32) uint32

MaxPayloadLength returns the maximum length the payload can be for the receiver. This is part of the Message interface implementation.

type MsgVersion 

type MsgVersion struct {
	// Version of the protocol the node is using.
	ProtocolVersion int32

	// Bitfield which identifies the enabled services.
	Services protocol.ServiceFlag

	// Time the message was generated.  This is encoded as an int64 on the wire.
	Timestamp time.Time

	// Address of the remote peer.
	AddrYou types.NetAddress

	// Address of the local peer.
	AddrMe types.NetAddress

	// Unique value associated with message that is used to detect self
	// connections.
	Nonce uint64

	// The user agent that generated messsage.  This is a encoded as a varString
	// on the wire.  This has a max length of MaxUserAgentLen.
	UserAgent string

	// Last DAG graph state seen by the generator of the version message.
	LastGS *blockdag.GraphState

	// Don't announce transactions to peer.
	DisableRelayTx bool
}

MsgVersion implements the Message interface and represents a version message. It is used for a peer to advertise itself as soon as an outbound connection is made. The remote peer then uses this information along with its own to negotiate. The remote peer must then respond with a version message of its own containing the negotiated values followed by a verack message (MsgVerAck). This exchange must take place before any further communication is allowed to proceed.

func NewMsgVersion 

func NewMsgVersion(me *types.NetAddress, you *types.NetAddress, nonce uint64,
	lastGS *blockdag.GraphState) *MsgVersion

NewMsgVersion returns a new Version message that conforms to the Message interface using the passed parameters and defaults for the remaining fields.

func NewMsgVersionFromConn 

func NewMsgVersionFromConn(conn net.Conn, nonce uint64,
	lastGS *blockdag.GraphState) (*MsgVersion, error)

NewMsgVersionFromConn is a convenience function that extracts the remote and local address from conn and returns a new version message that conforms to the Message interface. See NewMsgVersion.

func (*MsgVersion) AddService 

func (msg *MsgVersion) AddService(service protocol.ServiceFlag)

AddService adds service as a supported service by the peer generating the message.

func (*MsgVersion) AddUserAgent 

func (msg *MsgVersion) AddUserAgent(name string, version string,
	comments ...string) error

AddUserAgent adds a user agent to the user agent string for the version message. The version string is not defined to any strict format, although it is recommended to use the form "major.minor.revision" e.g. "2.6.41".

func (*MsgVersion) Command 

func (msg *MsgVersion) Command() string

Command returns the protocol command string for the message. This is part of the Message interface implementation.

func (*MsgVersion) Decode 

func (msg *MsgVersion) Decode(r io.Reader, pver uint32) error

Decode decodes r encoding into the receiver. The version message is special in that the protocol version hasn't been negotiated yet. As a result, the pver field is ignored and any fields which are added in new versions are optional. This also mean that r must be a *bytes.Buffer so the number of remaining bytes can be ascertained.

This is part of the Message interface implementation.

func (*MsgVersion) Encode 

func (msg *MsgVersion) Encode(w io.Writer, pver uint32) error

Encode encodes the receiver to w This is part of the Message interface implementation.

func (*MsgVersion) HasService 

func (msg *MsgVersion) HasService(service protocol.ServiceFlag) bool

HasService returns whether the specified service is supported by the peer that generated the message.

func (*MsgVersion) MaxPayloadLength 

func (msg *MsgVersion) MaxPayloadLength(pver uint32) uint32

MaxPayloadLength returns the maximum length the payload can be for the receiver. This is part of the Message interface implementation.

type RejectCode 

type RejectCode uint8

RejectCode represents a numeric value by which a remote peer indicates why a message was rejected. 

const (
	RejectMalformed       RejectCode = 0x01
	RejectInvalid         RejectCode = 0x10
	RejectObsolete        RejectCode = 0x11
	RejectDuplicate       RejectCode = 0x12
	RejectNonstandard     RejectCode = 0x40
	RejectDust            RejectCode = 0x41
	RejectInsufficientFee RejectCode = 0x42
	RejectCheckpoint      RejectCode = 0x43
	RejectBan             RejectCode = 0x50
	RejectMaxInbound      RejectCode = 0x51
)

These constants define the various supported reject codes.

func (RejectCode) String 

func (code RejectCode) String() string

String returns the RejectCode in human-readable form.

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.