cluster-registry-controller

Cluster registry controller

The cluster registry controller helps to form a group of Kubernetes clusters and synchronize any K8s resources across those clusters arbitrarily.

Cluster Registry API

The api directory defines a lightweight Kubernetes Custom Resource Definition API for defining a list of clusters and associated metadata in a K8s environment.

Defined CRDs

1. Cluster: defines a Kubernetes cluster.
2. ResourceSyncRule: defines a sync rule based on which Kubernetes resources are synced across clusters.
3. ClusterFeature: defines a feature name, which can be used by a ResourceSyncRule resource to define which clusters to sync from a given Kubernetes resource.

Overview

The Cluster resource represents a Kubernetes cluster. The cluster registry controller fills the status with cluster related metadata for the Cluster CR.

The controller is mostly useful in multi-cluster scenarios. In this scenario, the cluster registry controller is deployed to all Kubernetes clusters. The same Cluster CRs should be placed on all participating Kubernetes clusters as well. Also, the credentials for all clusters should be distributed to all clusters (these are usually stored in k8s secrets).

The cluster registry controller syncs the Cluster CR and related secret resources across clusters to help bootstrap the cluster group itself.

You can define your own ResourceSyncRule resources to sync k8s resources between these clusters.

In such a multi-cluster setup, here is how the cluster registry controller works:

• The controller only writes to the local cluster where it is deployed to
• The controller only reads from peer clusters

By default, the required resources are kept in sync between all clusters. It can be further adjusted, from which clusters and to which clusters certain resource should be synced.

The cluster registry controller works in a fully-distributed topology, there is no leader or single point of failure in the system.

Networking requirements

The cluster registry controller instances running on the clusters must be able to reach the API server of every other cluster in the cluster group, so every cluster can read the relevant resources from the other clusters.

The cluster registry controller pod connects directly to Kubernetes API server of the peer clusters. This works automatically, if the API servers are publicly available. Otherwise, configure a reachable endpoint for them in the Cluster CR spec. (For security reasons, we recommend making the API server addresses available only from the IP ranges of the peer clusters.)

Quickstart

Form cluster group with two clusters

1. Install cluster registry controller on the first cluster. The following command installs the cluster registry controller on your cluster, creates a Cluster CR with the name FIRST-CLUSTER-NAME, and it also creates a secret that holds a Kubeconfig with read access to this cluster.

   helm install --namespace=cluster-registry --create-namespace cluster-registry-controller deploy/charts/cluster-registry --set localCluster.name=<FIRST-CLUSTER-NAME> --kube-context <FIRST-CLUSTER-CONTEXT>
   

   Tip: Use the --set controller.apiServerEndpointAddress=<PUBLIC-API-SERVER-ADDRESS> flag, if your Kubernetes cluster API returns private ip for the api server.

2. Install cluster registry controller on the second cluster. This command installs the cluster registry controller on your cluster, creates a Cluster CR with the name SECOND-CLUSTER-NAME, and it also creates a secret that holds a Kubeconfig with read access to this cluster.

   helm install --namespace=cluster-registry --create-namespace cluster-registry-controller deploy/charts/cluster-registry --set localCluster.name=<SECOND-CLUSTER-NAME> --kube-context <SECOND-CLUSTER-CONTEXT>
   

3. Copy/paste Cluster and secret resources from first->second and second->first cluster. The secret is needed so that the cluster registry controller of one cluster can read from the other cluster.

   From first cluster to second cluster:

   kubectl get cluster <FIRST-CLUSTER-NAME> --context <FIRST-CLUSTER-CONTEXT> -o yaml | pbcopy && pbpaste | kubectl apply --context <SECOND-CLUSTER-CONTEXT> -f -
   
   kubectl get secret -n cluster-registry <FIRST-CLUSTER-NAME> --context <FIRST-CLUSTER-CONTEXT> -o yaml | pbcopy && pbpaste | kubectl apply --context <SECOND-CLUSTER-CONTEXT> -f -
   

   From second cluster to first cluster:

   kubectl get cluster <SECOND-CLUSTER-NAME> --context <SECOND-CLUSTER-CONTEXT> -o yaml | pbcopy && pbpaste | kubectl apply --context <FIRST-CLUSTER-CONTEXT> -f -
   
   kubectl get secret -n cluster-registry <SECOND-CLUSTER-NAME> --context <SECOND-CLUSTER-CONTEXT> -o yaml | pbcopy && pbpaste | kubectl apply --context <FIRST-CLUSTER-CONTEXT> -f -
   

4. Check the status of the Cluster CRs. Note the following points:

   • Both Cluster CRs should show Synced state.
   • On the first cluster, the <FIRST-CLUSTER-NAME> Cluster CR should be type local in the status, the <SECOND-CLUSTER-NAME> should be peer.
   • On the second cluster, the <SECOND-CLUSTER-NAME> Cluster CR should be type local in the status, the <FIRST-CLUSTER-NAME> should be peer.

   The type in the Cluster status is determined by the clusterID field in the Cluster spec and by the kube-system namespace uid. If they match, the cluster is local, otherwise it is a peer cluster.

The cluster group is successfully formed at this point.

Attach additional clusters to the group

1. Install the cluster registry controller on the new cluster as shown above.

2. Choose one cluster from the existing cluster group and perform the Cluster and secret resource swap with the new cluster:

   From first cluster to third cluster:

   kubectl get cluster <FIRST-CLUSTER-NAME> --context <FIRST-CLUSTER-CONTEXT> -o yaml | pbcopy && pbpaste | kubectl apply --context <THIRD-CLUSTER-CONTEXT> -f -
   
   kubectl get secret -n cluster-registry <FIRST-CLUSTER-NAME> --context <FIRST-CLUSTER-CONTEXT> -o yaml | pbcopy && pbpaste | kubectl apply --context <THIRD-CLUSTER-CONTEXT> -f -
   

   From third cluster to first cluster:

   kubectl get cluster <THIRD-CLUSTER-NAME> --context <THIRD-CLUSTER-CONTEXT> -o yaml | pbcopy && pbpaste | kubectl apply --context <FIRST-CLUSTER-CONTEXT> -f -
   
   kubectl get secret -n cluster-registry <THIRD-CLUSTER-NAME> --context <THIRD-CLUSTER-CONTEXT> -o yaml | pbcopy && pbpaste | kubectl apply --context <FIRST-CLUSTER-CONTEXT> -f -
   

   You don't need to do the Cluster and secret resource swap between the new cluster and any other cluster in the cluster group. The cluster registry controller automatically syncs these Cluster and secret resources between the clusters in the cluster group and once a new cluster is added to the cluster group in any of the clusters, then it will be synced between the other clusters automatically.

   So, if you have 10 clusters in a cluster group, you'll still only need to do the Cluster and secret resource swap once with one cluster from the cluster group, the rest should synchronize automatically.

3. Check the status of the Cluster CRs:

   All Cluster CRs should show Synced state. If so, then the cluster group is successfully expanded.

ResourceSyncRule example usage

Sync everywhere

1. Create a sample secret on the third cluster, which will be copied around:

   apiVersion: v1
   kind: Secret
   metadata:
     name: test-secret
     namespace: cluster-registry
   data: {}
   

2. Create a ResourceSyncRule on the first cluster to synchronize the secret to all clusters:

   apiVersion: clusterregistry.k8s.cisco.com/v1alpha1
   kind: ResourceSyncRule
   metadata:
     name: test-secret-sink
   spec:
     groupVersionKind:
       kind: Secret
       version: v1
     rules:
     - match:
       - objectKey:
           name: test-secret
           namespace: cluster-registry
   

   This ResourceSyncRule resource itself and the secret resource as well should appear shortly on all clusters of the cluster group.

   At this point, if a secret from any of the clusters (except from the one where it originates from) is deleted or modified, it will be synced back immediately by the cluster registry controller.

Sync to a set of clusters

Cluster registry controller can be configured to sync only to specific clusters in the cluster group (instead of all of them). To do that, you must add an annotation to the cluster where you don't want to sync to.

1. Add the following annotation to the ResourceSyncRule on the first cluster:

   annotations:
     cluster-registry.k8s.cisco.com/resource-sync-disabled: "true"
   

2. Delete the ResourceSyncRule from the second cluster.

   The ResourceSyncRule resource will not be recreated because of the annotation, which was just added.

   If the annotation is not added as described in the previous step, then the ResourceSyncRule will be recreated.

3. Delete the test-secret from the second cluster.

   The secret will not be recreated because the ResourceSyncRule resource does not exist on the second cluster.

Sync from a set of clusters

Cluster registry controller can be configured, to only sync from specific clusters in the cluster group (instead of all of them). To do that, you must create a ClusterFeature resource on the clusters where you want to sync from and add a clusterFeatureMatch field to the ResourceSyncRule resources on the clusters where you want to sync to.

1. Add the following field to the ResourceSyncRule spec on the first cluster:

   clusterFeatureMatch:
   - featureName: test-secret-feature
   

   This causes that the secret will only be synced from clusters where there are ClusterFeature resources defined.

   At this point, there is no ClusterFeature present on any cluster, so if the secret would be deleted now from the first cluster, it would not be recreated.

2. Apply the following ClusterFeature to the third cluster:

   apiVersion: clusterregistry.k8s.cisco.com/v1alpha1
   kind: ClusterFeature
   metadata:
     name: test-secret-source
   spec:
     featureName: test-secret-feature
   

3. Delete the test-secret from the first cluster.

   It should be recreated now, because it can sync the secret from the third cluster.

RBAC considerations

The cluster registry controller only writes to local clusters and only reads from peer clusters. By default, it has access to read namespace, node and secret resources. The quickstart example worked, because the controller was allowed to read the secret from the remote cluster.

If other resources should be synced, then the RBAC rules of the operator should be expanded. The ClusterRole aggregation feature is used to achieve this conveniently.

• On the cluster, where the resources are read from (usually where ClusterFeature resources are present) a ClusterRole should be defined with the correct read roles and the following label should be added:

  labels:
    cluster-registry.k8s.cisco.com/reader-aggregated: "true"
  

• On the cluster, where the resources are written to (usually where ResourceSyncRule resources are present) a ClusterRole should be defined with the correct write roles and the following label should be added:

  labels:
    cluster-registry.k8s.cisco.com/controller-aggregated: "true"
  

Contributing

If you find this project useful, help us:

• Support the development of this project and star this repo! ⭐
• If you use Cluster registry controller, add yourself to the list of adopters.🤘
  
• Help new users with issues they may encounter 💪
• Send a pull request with your new features and bug fixes 🚀 Check out the developer docs for that.