tx

type AuthInfo struct {
	// signer_infos defines the signing modes for the required signers. The number
	// and order of elements must match the required signers from TxBody's messages.
	// The first element is the primary signer and the one which pays the fee.
	SignerInfos []*SignerInfo `protobuf:"bytes,1,rep,name=signer_infos,json=signerInfos,proto3" json:"signer_infos,omitempty"`
	// Fee is the fee and gas limit for the transaction. The first signer is the
	// primary signer and the one which pays the fee. The fee can be calculated
	// based on the cost of evaluating the body and doing signature verification
	// of the signers. This can be estimated via simulation.
	Fee *Fee `protobuf:"bytes,2,opt,name=fee,proto3" json:"fee,omitempty"`
}

type Fee struct {
	// amount is the amount of coins to be paid as a fee
	Amount github_com_cosmos_cosmos_sdk_types.Coins `protobuf:"bytes,1,rep,name=amount,proto3,castrepeated=github.com/cosmos/cosmos-sdk/types.Coins" json:"amount"`
	// gas_limit is the maximum gas that can be used in transaction processing
	// before an out of gas error occurs
	GasLimit uint64 `protobuf:"varint,2,opt,name=gas_limit,json=gasLimit,proto3" json:"gas_limit,omitempty"`
}

type ModeInfo struct {
	// sum is the oneof that specifies whether this represents a single or nested
	// multisig signer
	//
	// Types that are valid to be assigned to Sum:
	//	*ModeInfo_Single_
	//	*ModeInfo_Multi_
	Sum isModeInfo_Sum `protobuf_oneof:"sum"`
}

type ModeInfo_Multi struct {
	// bitarray specifies which keys within the multisig are signing
	Bitarray *types1.CompactBitArray `protobuf:"bytes,1,opt,name=bitarray,proto3" json:"bitarray,omitempty"`
	// mode_infos is the corresponding modes of the signers of the multisig
	// which could include nested multisig public keys
	ModeInfos []*ModeInfo `protobuf:"bytes,2,rep,name=mode_infos,json=modeInfos,proto3" json:"mode_infos,omitempty"`
}

type ModeInfo_Multi_ struct {
	Multi *ModeInfo_Multi `protobuf:"bytes,2,opt,name=multi,proto3,oneof" json:"multi,omitempty"`
}

type ModeInfo_Single struct {
	// mode is the signing mode of the single signer
	Mode signing.SignMode `protobuf:"varint,1,opt,name=mode,proto3,enum=cosmos.tx.signing.SignMode" json:"mode,omitempty"`
}

type ModeInfo_Single_ struct {
	Single *ModeInfo_Single `protobuf:"bytes,1,opt,name=single,proto3,oneof" json:"single,omitempty"`
}

type SignDoc struct {
	// body_bytes is protobuf serialization of a TxBody that matches the representation in TxRaw.
	BodyBytes []byte `protobuf:"bytes,1,opt,name=body_bytes,json=bodyBytes,proto3" json:"body_bytes,omitempty"`
	// auth_info_bytes is a protobuf serialization of an AuthInfo that matches the representation in TxRaw.
	AuthInfoBytes []byte `protobuf:"bytes,2,opt,name=auth_info_bytes,json=authInfoBytes,proto3" json:"auth_info_bytes,omitempty"`
	// chain_id is the unique identifier of the chain this transaction targets.
	// It prevents signed transactions from being used on another chain by an
	// attacker
	ChainId string `protobuf:"bytes,3,opt,name=chain_id,json=chainId,proto3" json:"chain_id,omitempty"`
	// account_number is the account number of the account in state
	AccountNumber uint64 `protobuf:"varint,4,opt,name=account_number,json=accountNumber,proto3" json:"account_number,omitempty"`
	// account_sequence starts at 1 rather than 0 to avoid the case where
	// the default 0 value must be omitted in protobuf serialization
	AccountSequence uint64 `protobuf:"varint,5,opt,name=account_sequence,json=accountSequence,proto3" json:"account_sequence,omitempty"`
}

type SignerInfo struct {
	// public_key is the public key of the signer. It is optional for accounts
	// that already exist in state. If unset, the verifier can use the required \
	// signer address for this position and lookup the public key.
	PublicKey *types1.PublicKey `protobuf:"bytes,1,opt,name=public_key,json=publicKey,proto3" json:"public_key,omitempty"`
	// mode_info describes the signing mode of the signer and is a nested
	// structure to support nested multisig pubkey's
	ModeInfo *ModeInfo `protobuf:"bytes,2,opt,name=mode_info,json=modeInfo,proto3" json:"mode_info,omitempty"`
}

type Tx struct {
	// body is the processable content of the transaction
	Body *TxBody `protobuf:"bytes,1,opt,name=body,proto3" json:"body,omitempty"`
	// auth_info is the authorization related content of the transaction, specifically
	// signers, signer modes and fee
	AuthInfo *AuthInfo `protobuf:"bytes,2,opt,name=auth_info,json=authInfo,proto3" json:"auth_info,omitempty"`
	// signatures is a list of signatures that matches the length and order of AuthInfo's signer_infos to
	// allow connecting signature meta information like public key and signing mode by position.
	Signatures [][]byte `protobuf:"bytes,3,rep,name=signatures,proto3" json:"signatures,omitempty"`
}

type TxBody struct {
	// messages is a list of messages to be executed. The required signers of those messages define
	// the number and order of elements in AuthInfo's signer_infos and Tx's signatures.
	// Each required signer address is added to the list only the first time it occurs.
	//
	// By convention, the first required signer (usually from the first message) is referred
	// to as the primary signer and pays the fee for the whole transaction.
	Messages []*types.Any `protobuf:"bytes,1,rep,name=messages,proto3" json:"messages,omitempty"`
	// memo is any arbitrary memo to be added to the transaction
	Memo string `protobuf:"bytes,2,opt,name=memo,proto3" json:"memo,omitempty"`
	// timeout is the block height after which this transaction will not
	// be processed by the chain
	TimeoutHeight int64 `protobuf:"varint,3,opt,name=timeout_height,json=timeoutHeight,proto3" json:"timeout_height,omitempty"`
	// extension_options are arbitrary options that can be added by chains
	// when the default options are not sufficient. If any of these are present
	// and can't be handled, the transaction will be rejected
	ExtensionOptions []*types.Any `protobuf:"bytes,1023,rep,name=extension_options,json=extensionOptions,proto3" json:"extension_options,omitempty"`
	// extension_options are arbitrary options that can be added by chains
	// when the default options are not sufficient. If any of these are present
	// and can't be handled, they will be ignored
	NonCriticalExtensionOptions []*types.Any `` /* 149-byte string literal not displayed */
}

type TxRaw struct {
	// body_bytes is a protobuf serialization of a TxBody that matches the representation in SignDoc.
	BodyBytes []byte `protobuf:"bytes,1,opt,name=body_bytes,json=bodyBytes,proto3" json:"body_bytes,omitempty"`
	// auth_info_bytes is a protobuf serialization of an AuthInfo that matches the representation in SignDoc.
	AuthInfoBytes []byte `protobuf:"bytes,2,opt,name=auth_info_bytes,json=authInfoBytes,proto3" json:"auth_info_bytes,omitempty"`
	// signatures is a list of signatures that matches the length and order of AuthInfo's signer_infos to
	// allow connecting signature meta information like public key and signing mode by position.
	Signatures [][]byte `protobuf:"bytes,3,rep,name=signatures,proto3" json:"signatures,omitempty"`
}