ecr

package
v1.7.8 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Mar 10, 2017 License: Apache-2.0 Imports: 7 Imported by: 0

Documentation

Overview

Package ecr provides a client for Amazon EC2 Container Registry.

Index

Examples

Constants

View Source
const (
	// ImageFailureCodeInvalidImageDigest is a ImageFailureCode enum value
	ImageFailureCodeInvalidImageDigest = "InvalidImageDigest"

	// ImageFailureCodeInvalidImageTag is a ImageFailureCode enum value
	ImageFailureCodeInvalidImageTag = "InvalidImageTag"

	// ImageFailureCodeImageTagDoesNotMatchDigest is a ImageFailureCode enum value
	ImageFailureCodeImageTagDoesNotMatchDigest = "ImageTagDoesNotMatchDigest"

	// ImageFailureCodeImageNotFound is a ImageFailureCode enum value
	ImageFailureCodeImageNotFound = "ImageNotFound"

	// ImageFailureCodeMissingDigestAndTag is a ImageFailureCode enum value
	ImageFailureCodeMissingDigestAndTag = "MissingDigestAndTag"
)
View Source
const (
	// LayerAvailabilityAvailable is a LayerAvailability enum value
	LayerAvailabilityAvailable = "AVAILABLE"

	// LayerAvailabilityUnavailable is a LayerAvailability enum value
	LayerAvailabilityUnavailable = "UNAVAILABLE"
)
View Source
const (
	// LayerFailureCodeInvalidLayerDigest is a LayerFailureCode enum value
	LayerFailureCodeInvalidLayerDigest = "InvalidLayerDigest"

	// LayerFailureCodeMissingLayerDigest is a LayerFailureCode enum value
	LayerFailureCodeMissingLayerDigest = "MissingLayerDigest"
)
View Source
const (
	// TagStatusTagged is a TagStatus enum value
	TagStatusTagged = "TAGGED"

	// TagStatusUntagged is a TagStatus enum value
	TagStatusUntagged = "UNTAGGED"
)
View Source
const (

	// ErrCodeEmptyUploadException for service response error code
	// "EmptyUploadException".
	//
	// The specified layer upload does not contain any layer parts.
	ErrCodeEmptyUploadException = "EmptyUploadException"

	// ErrCodeImageAlreadyExistsException for service response error code
	// "ImageAlreadyExistsException".
	//
	// The specified image has already been pushed, and there are no changes to
	// the manifest or image tag since the last push.
	ErrCodeImageAlreadyExistsException = "ImageAlreadyExistsException"

	// ErrCodeImageNotFoundException for service response error code
	// "ImageNotFoundException".
	//
	// The image requested does not exist in the specified repository.
	ErrCodeImageNotFoundException = "ImageNotFoundException"

	// ErrCodeInvalidLayerException for service response error code
	// "InvalidLayerException".
	//
	// The layer digest calculation performed by Amazon ECR upon receipt of the
	// image layer does not match the digest specified.
	ErrCodeInvalidLayerException = "InvalidLayerException"

	// ErrCodeInvalidLayerPartException for service response error code
	// "InvalidLayerPartException".
	//
	// The layer part size is not valid, or the first byte specified is not consecutive
	// to the last byte of a previous layer part upload.
	ErrCodeInvalidLayerPartException = "InvalidLayerPartException"

	// ErrCodeInvalidParameterException for service response error code
	// "InvalidParameterException".
	//
	// The specified parameter is invalid. Review the available parameters for the
	// API request.
	ErrCodeInvalidParameterException = "InvalidParameterException"

	// ErrCodeLayerAlreadyExistsException for service response error code
	// "LayerAlreadyExistsException".
	//
	// The image layer already exists in the associated repository.
	ErrCodeLayerAlreadyExistsException = "LayerAlreadyExistsException"

	// ErrCodeLayerInaccessibleException for service response error code
	// "LayerInaccessibleException".
	//
	// The specified layer is not available because it is not associated with an
	// image. Unassociated image layers may be cleaned up at any time.
	ErrCodeLayerInaccessibleException = "LayerInaccessibleException"

	// ErrCodeLayerPartTooSmallException for service response error code
	// "LayerPartTooSmallException".
	//
	// Layer parts must be at least 5 MiB in size.
	ErrCodeLayerPartTooSmallException = "LayerPartTooSmallException"

	// ErrCodeLayersNotFoundException for service response error code
	// "LayersNotFoundException".
	//
	// The specified layers could not be found, or the specified layer is not valid
	// for this repository.
	ErrCodeLayersNotFoundException = "LayersNotFoundException"

	// ErrCodeLimitExceededException for service response error code
	// "LimitExceededException".
	//
	// The operation did not succeed because it would have exceeded a service limit
	// for your account. For more information, see Amazon ECR Default Service Limits
	// (http://docs.aws.amazon.com/AmazonECR/latest/userguide/service_limits.html)
	// in the Amazon EC2 Container Registry User Guide.
	ErrCodeLimitExceededException = "LimitExceededException"

	// ErrCodeRepositoryAlreadyExistsException for service response error code
	// "RepositoryAlreadyExistsException".
	//
	// The specified repository already exists in the specified registry.
	ErrCodeRepositoryAlreadyExistsException = "RepositoryAlreadyExistsException"

	// ErrCodeRepositoryNotEmptyException for service response error code
	// "RepositoryNotEmptyException".
	//
	// The specified repository contains images. To delete a repository that contains
	// images, you must force the deletion with the force parameter.
	ErrCodeRepositoryNotEmptyException = "RepositoryNotEmptyException"

	// ErrCodeRepositoryNotFoundException for service response error code
	// "RepositoryNotFoundException".
	//
	// The specified repository could not be found. Check the spelling of the specified
	// repository and ensure that you are performing operations on the correct registry.
	ErrCodeRepositoryNotFoundException = "RepositoryNotFoundException"

	// ErrCodeRepositoryPolicyNotFoundException for service response error code
	// "RepositoryPolicyNotFoundException".
	//
	// The specified repository and registry combination does not have an associated
	// repository policy.
	ErrCodeRepositoryPolicyNotFoundException = "RepositoryPolicyNotFoundException"

	// ErrCodeServerException for service response error code
	// "ServerException".
	//
	// These errors are usually caused by a server-side issue.
	ErrCodeServerException = "ServerException"

	// ErrCodeUploadNotFoundException for service response error code
	// "UploadNotFoundException".
	//
	// The upload could not be found, or the specified upload id is not valid for
	// this repository.
	ErrCodeUploadNotFoundException = "UploadNotFoundException"
)
View Source
const (
	ServiceName = "ecr"       // Service endpoint prefix API calls made to.
	EndpointsID = ServiceName // Service ID for Regions and Endpoints metadata.
)

Service information constants

Variables

This section is empty.

Functions

This section is empty.

Types

type AuthorizationData

type AuthorizationData struct {

	// A base64-encoded string that contains authorization data for the specified
	// Amazon ECR registry. When the string is decoded, it is presented in the format
	// user:password for private registry authentication using docker login.
	AuthorizationToken *string `locationName:"authorizationToken" type:"string"`

	// The Unix time in seconds and milliseconds when the authorization token expires.
	// Authorization tokens are valid for 12 hours.
	ExpiresAt *time.Time `locationName:"expiresAt" type:"timestamp" timestampFormat:"unix"`

	// The registry URL to use for this authorization token in a docker login command.
	// The Amazon ECR registry URL format is https://aws_account_id.dkr.ecr.region.amazonaws.com.
	// For example, https://012345678910.dkr.ecr.us-east-1.amazonaws.com..
	ProxyEndpoint *string `locationName:"proxyEndpoint" type:"string"`
	// contains filtered or unexported fields
}

An object representing authorization data for an Amazon ECR registry. Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/AuthorizationData

func (AuthorizationData) GoString

func (s AuthorizationData) GoString() string

GoString returns the string representation

func (*AuthorizationData) SetAuthorizationToken added in v1.5.0

func (s *AuthorizationData) SetAuthorizationToken(v string) *AuthorizationData

SetAuthorizationToken sets the AuthorizationToken field's value.

func (*AuthorizationData) SetExpiresAt added in v1.5.0

func (s *AuthorizationData) SetExpiresAt(v time.Time) *AuthorizationData

SetExpiresAt sets the ExpiresAt field's value.

func (*AuthorizationData) SetProxyEndpoint added in v1.5.0

func (s *AuthorizationData) SetProxyEndpoint(v string) *AuthorizationData

SetProxyEndpoint sets the ProxyEndpoint field's value.

func (AuthorizationData) String

func (s AuthorizationData) String() string

String returns the string representation

type BatchCheckLayerAvailabilityInput

type BatchCheckLayerAvailabilityInput struct {

	// The digests of the image layers to check.
	//
	// LayerDigests is a required field
	LayerDigests []*string `locationName:"layerDigests" min:"1" type:"list" required:"true"`

	// The AWS account ID associated with the registry that contains the image layers
	// to check. If you do not specify a registry, the default registry is assumed.
	RegistryId *string `locationName:"registryId" type:"string"`

	// The name of the repository that is associated with the image layers to check.
	//
	// RepositoryName is a required field
	RepositoryName *string `locationName:"repositoryName" min:"2" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/BatchCheckLayerAvailabilityRequest

func (BatchCheckLayerAvailabilityInput) GoString

GoString returns the string representation

func (*BatchCheckLayerAvailabilityInput) SetLayerDigests added in v1.5.0

SetLayerDigests sets the LayerDigests field's value.

func (*BatchCheckLayerAvailabilityInput) SetRegistryId added in v1.5.0

SetRegistryId sets the RegistryId field's value.

func (*BatchCheckLayerAvailabilityInput) SetRepositoryName added in v1.5.0

SetRepositoryName sets the RepositoryName field's value.

func (BatchCheckLayerAvailabilityInput) String

String returns the string representation

func (*BatchCheckLayerAvailabilityInput) Validate added in v1.1.22

Validate inspects the fields of the type to determine if they are valid.

type BatchCheckLayerAvailabilityOutput

type BatchCheckLayerAvailabilityOutput struct {

	// Any failures associated with the call.
	Failures []*LayerFailure `locationName:"failures" type:"list"`

	// A list of image layer objects corresponding to the image layer references
	// in the request.
	Layers []*Layer `locationName:"layers" type:"list"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/BatchCheckLayerAvailabilityResponse

func (BatchCheckLayerAvailabilityOutput) GoString

GoString returns the string representation

func (*BatchCheckLayerAvailabilityOutput) SetFailures added in v1.5.0

SetFailures sets the Failures field's value.

func (*BatchCheckLayerAvailabilityOutput) SetLayers added in v1.5.0

SetLayers sets the Layers field's value.

func (BatchCheckLayerAvailabilityOutput) String

String returns the string representation

type BatchDeleteImageInput

type BatchDeleteImageInput struct {

	// A list of image ID references that correspond to images to delete. The format
	// of the imageIds reference is imageTag=tag or imageDigest=digest.
	//
	// ImageIds is a required field
	ImageIds []*ImageIdentifier `locationName:"imageIds" min:"1" type:"list" required:"true"`

	// The AWS account ID associated with the registry that contains the image to
	// delete. If you do not specify a registry, the default registry is assumed.
	RegistryId *string `locationName:"registryId" type:"string"`

	// The repository that contains the image to delete.
	//
	// RepositoryName is a required field
	RepositoryName *string `locationName:"repositoryName" min:"2" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Deletes specified images within a specified repository. Images are specified with either the imageTag or imageDigest. Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/BatchDeleteImageRequest

func (BatchDeleteImageInput) GoString

func (s BatchDeleteImageInput) GoString() string

GoString returns the string representation

func (*BatchDeleteImageInput) SetImageIds added in v1.5.0

SetImageIds sets the ImageIds field's value.

func (*BatchDeleteImageInput) SetRegistryId added in v1.5.0

func (s *BatchDeleteImageInput) SetRegistryId(v string) *BatchDeleteImageInput

SetRegistryId sets the RegistryId field's value.

func (*BatchDeleteImageInput) SetRepositoryName added in v1.5.0

func (s *BatchDeleteImageInput) SetRepositoryName(v string) *BatchDeleteImageInput

SetRepositoryName sets the RepositoryName field's value.

func (BatchDeleteImageInput) String

func (s BatchDeleteImageInput) String() string

String returns the string representation

func (*BatchDeleteImageInput) Validate added in v1.1.22

func (s *BatchDeleteImageInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type BatchDeleteImageOutput

type BatchDeleteImageOutput struct {

	// Any failures associated with the call.
	Failures []*ImageFailure `locationName:"failures" type:"list"`

	// The image IDs of the deleted images.
	ImageIds []*ImageIdentifier `locationName:"imageIds" min:"1" type:"list"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/BatchDeleteImageResponse

func (BatchDeleteImageOutput) GoString

func (s BatchDeleteImageOutput) GoString() string

GoString returns the string representation

func (*BatchDeleteImageOutput) SetFailures added in v1.5.0

SetFailures sets the Failures field's value.

func (*BatchDeleteImageOutput) SetImageIds added in v1.5.0

SetImageIds sets the ImageIds field's value.

func (BatchDeleteImageOutput) String

func (s BatchDeleteImageOutput) String() string

String returns the string representation

type BatchGetImageInput

type BatchGetImageInput struct {

	// The accepted media types for the request.
	//
	// Valid values: application/vnd.docker.distribution.manifest.v1+json | application/vnd.docker.distribution.manifest.v2+json
	// | application/vnd.oci.image.manifest.v1+json
	AcceptedMediaTypes []*string `locationName:"acceptedMediaTypes" min:"1" type:"list"`

	// A list of image ID references that correspond to images to describe. The
	// format of the imageIds reference is imageTag=tag or imageDigest=digest.
	//
	// ImageIds is a required field
	ImageIds []*ImageIdentifier `locationName:"imageIds" min:"1" type:"list" required:"true"`

	// The AWS account ID associated with the registry that contains the images
	// to describe. If you do not specify a registry, the default registry is assumed.
	RegistryId *string `locationName:"registryId" type:"string"`

	// The repository that contains the images to describe.
	//
	// RepositoryName is a required field
	RepositoryName *string `locationName:"repositoryName" min:"2" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/BatchGetImageRequest

func (BatchGetImageInput) GoString

func (s BatchGetImageInput) GoString() string

GoString returns the string representation

func (*BatchGetImageInput) SetAcceptedMediaTypes added in v1.6.8

func (s *BatchGetImageInput) SetAcceptedMediaTypes(v []*string) *BatchGetImageInput

SetAcceptedMediaTypes sets the AcceptedMediaTypes field's value.

func (*BatchGetImageInput) SetImageIds added in v1.5.0

SetImageIds sets the ImageIds field's value.

func (*BatchGetImageInput) SetRegistryId added in v1.5.0

func (s *BatchGetImageInput) SetRegistryId(v string) *BatchGetImageInput

SetRegistryId sets the RegistryId field's value.

func (*BatchGetImageInput) SetRepositoryName added in v1.5.0

func (s *BatchGetImageInput) SetRepositoryName(v string) *BatchGetImageInput

SetRepositoryName sets the RepositoryName field's value.

func (BatchGetImageInput) String

func (s BatchGetImageInput) String() string

String returns the string representation

func (*BatchGetImageInput) Validate added in v1.1.22

func (s *BatchGetImageInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type BatchGetImageOutput

type BatchGetImageOutput struct {

	// Any failures associated with the call.
	Failures []*ImageFailure `locationName:"failures" type:"list"`

	// A list of image objects corresponding to the image references in the request.
	Images []*Image `locationName:"images" type:"list"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/BatchGetImageResponse

func (BatchGetImageOutput) GoString

func (s BatchGetImageOutput) GoString() string

GoString returns the string representation

func (*BatchGetImageOutput) SetFailures added in v1.5.0

SetFailures sets the Failures field's value.

func (*BatchGetImageOutput) SetImages added in v1.5.0

func (s *BatchGetImageOutput) SetImages(v []*Image) *BatchGetImageOutput

SetImages sets the Images field's value.

func (BatchGetImageOutput) String

func (s BatchGetImageOutput) String() string

String returns the string representation

type CompleteLayerUploadInput

type CompleteLayerUploadInput struct {

	// The sha256 digest of the image layer.
	//
	// LayerDigests is a required field
	LayerDigests []*string `locationName:"layerDigests" min:"1" type:"list" required:"true"`

	// The AWS account ID associated with the registry to which to upload layers.
	// If you do not specify a registry, the default registry is assumed.
	RegistryId *string `locationName:"registryId" type:"string"`

	// The name of the repository to associate with the image layer.
	//
	// RepositoryName is a required field
	RepositoryName *string `locationName:"repositoryName" min:"2" type:"string" required:"true"`

	// The upload ID from a previous InitiateLayerUpload operation to associate
	// with the image layer.
	//
	// UploadId is a required field
	UploadId *string `locationName:"uploadId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/CompleteLayerUploadRequest

func (CompleteLayerUploadInput) GoString

func (s CompleteLayerUploadInput) GoString() string

GoString returns the string representation

func (*CompleteLayerUploadInput) SetLayerDigests added in v1.5.0

func (s *CompleteLayerUploadInput) SetLayerDigests(v []*string) *CompleteLayerUploadInput

SetLayerDigests sets the LayerDigests field's value.

func (*CompleteLayerUploadInput) SetRegistryId added in v1.5.0

SetRegistryId sets the RegistryId field's value.

func (*CompleteLayerUploadInput) SetRepositoryName added in v1.5.0

func (s *CompleteLayerUploadInput) SetRepositoryName(v string) *CompleteLayerUploadInput

SetRepositoryName sets the RepositoryName field's value.

func (*CompleteLayerUploadInput) SetUploadId added in v1.5.0

SetUploadId sets the UploadId field's value.

func (CompleteLayerUploadInput) String

func (s CompleteLayerUploadInput) String() string

String returns the string representation

func (*CompleteLayerUploadInput) Validate added in v1.1.22

func (s *CompleteLayerUploadInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CompleteLayerUploadOutput

type CompleteLayerUploadOutput struct {

	// The sha256 digest of the image layer.
	LayerDigest *string `locationName:"layerDigest" type:"string"`

	// The registry ID associated with the request.
	RegistryId *string `locationName:"registryId" type:"string"`

	// The repository name associated with the request.
	RepositoryName *string `locationName:"repositoryName" min:"2" type:"string"`

	// The upload ID associated with the layer.
	UploadId *string `locationName:"uploadId" type:"string"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/CompleteLayerUploadResponse

func (CompleteLayerUploadOutput) GoString

func (s CompleteLayerUploadOutput) GoString() string

GoString returns the string representation

func (*CompleteLayerUploadOutput) SetLayerDigest added in v1.5.0

SetLayerDigest sets the LayerDigest field's value.

func (*CompleteLayerUploadOutput) SetRegistryId added in v1.5.0

SetRegistryId sets the RegistryId field's value.

func (*CompleteLayerUploadOutput) SetRepositoryName added in v1.5.0

SetRepositoryName sets the RepositoryName field's value.

func (*CompleteLayerUploadOutput) SetUploadId added in v1.5.0

SetUploadId sets the UploadId field's value.

func (CompleteLayerUploadOutput) String

func (s CompleteLayerUploadOutput) String() string

String returns the string representation

type CreateRepositoryInput

type CreateRepositoryInput struct {

	// The name to use for the repository. The repository name may be specified
	// on its own (such as nginx-web-app) or it can be prepended with a namespace
	// to group the repository into a category (such as project-a/nginx-web-app).
	//
	// RepositoryName is a required field
	RepositoryName *string `locationName:"repositoryName" min:"2" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/CreateRepositoryRequest

func (CreateRepositoryInput) GoString

func (s CreateRepositoryInput) GoString() string

GoString returns the string representation

func (*CreateRepositoryInput) SetRepositoryName added in v1.5.0

func (s *CreateRepositoryInput) SetRepositoryName(v string) *CreateRepositoryInput

SetRepositoryName sets the RepositoryName field's value.

func (CreateRepositoryInput) String

func (s CreateRepositoryInput) String() string

String returns the string representation

func (*CreateRepositoryInput) Validate added in v1.1.22

func (s *CreateRepositoryInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateRepositoryOutput

type CreateRepositoryOutput struct {

	// The repository that was created.
	Repository *Repository `locationName:"repository" type:"structure"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/CreateRepositoryResponse

func (CreateRepositoryOutput) GoString

func (s CreateRepositoryOutput) GoString() string

GoString returns the string representation

func (*CreateRepositoryOutput) SetRepository added in v1.5.0

SetRepository sets the Repository field's value.

func (CreateRepositoryOutput) String

func (s CreateRepositoryOutput) String() string

String returns the string representation

type DeleteRepositoryInput

type DeleteRepositoryInput struct {

	// Force the deletion of the repository if it contains images.
	Force *bool `locationName:"force" type:"boolean"`

	// The AWS account ID associated with the registry that contains the repository
	// to delete. If you do not specify a registry, the default registry is assumed.
	RegistryId *string `locationName:"registryId" type:"string"`

	// The name of the repository to delete.
	//
	// RepositoryName is a required field
	RepositoryName *string `locationName:"repositoryName" min:"2" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/DeleteRepositoryRequest

func (DeleteRepositoryInput) GoString

func (s DeleteRepositoryInput) GoString() string

GoString returns the string representation

func (*DeleteRepositoryInput) SetForce added in v1.5.0

SetForce sets the Force field's value.

func (*DeleteRepositoryInput) SetRegistryId added in v1.5.0

func (s *DeleteRepositoryInput) SetRegistryId(v string) *DeleteRepositoryInput

SetRegistryId sets the RegistryId field's value.

func (*DeleteRepositoryInput) SetRepositoryName added in v1.5.0

func (s *DeleteRepositoryInput) SetRepositoryName(v string) *DeleteRepositoryInput

SetRepositoryName sets the RepositoryName field's value.

func (DeleteRepositoryInput) String

func (s DeleteRepositoryInput) String() string

String returns the string representation

func (*DeleteRepositoryInput) Validate added in v1.1.22

func (s *DeleteRepositoryInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteRepositoryOutput

type DeleteRepositoryOutput struct {

	// The repository that was deleted.
	Repository *Repository `locationName:"repository" type:"structure"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/DeleteRepositoryResponse

func (DeleteRepositoryOutput) GoString

func (s DeleteRepositoryOutput) GoString() string

GoString returns the string representation

func (*DeleteRepositoryOutput) SetRepository added in v1.5.0

SetRepository sets the Repository field's value.

func (DeleteRepositoryOutput) String

func (s DeleteRepositoryOutput) String() string

String returns the string representation

type DeleteRepositoryPolicyInput

type DeleteRepositoryPolicyInput struct {

	// The AWS account ID associated with the registry that contains the repository
	// policy to delete. If you do not specify a registry, the default registry
	// is assumed.
	RegistryId *string `locationName:"registryId" type:"string"`

	// The name of the repository that is associated with the repository policy
	// to delete.
	//
	// RepositoryName is a required field
	RepositoryName *string `locationName:"repositoryName" min:"2" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/DeleteRepositoryPolicyRequest

func (DeleteRepositoryPolicyInput) GoString

func (s DeleteRepositoryPolicyInput) GoString() string

GoString returns the string representation

func (*DeleteRepositoryPolicyInput) SetRegistryId added in v1.5.0

SetRegistryId sets the RegistryId field's value.

func (*DeleteRepositoryPolicyInput) SetRepositoryName added in v1.5.0

SetRepositoryName sets the RepositoryName field's value.

func (DeleteRepositoryPolicyInput) String

String returns the string representation

func (*DeleteRepositoryPolicyInput) Validate added in v1.1.22

func (s *DeleteRepositoryPolicyInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteRepositoryPolicyOutput

type DeleteRepositoryPolicyOutput struct {

	// The JSON repository policy that was deleted from the repository.
	PolicyText *string `locationName:"policyText" type:"string"`

	// The registry ID associated with the request.
	RegistryId *string `locationName:"registryId" type:"string"`

	// The repository name associated with the request.
	RepositoryName *string `locationName:"repositoryName" min:"2" type:"string"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/DeleteRepositoryPolicyResponse

func (DeleteRepositoryPolicyOutput) GoString

func (s DeleteRepositoryPolicyOutput) GoString() string

GoString returns the string representation

func (*DeleteRepositoryPolicyOutput) SetPolicyText added in v1.5.0

SetPolicyText sets the PolicyText field's value.

func (*DeleteRepositoryPolicyOutput) SetRegistryId added in v1.5.0

SetRegistryId sets the RegistryId field's value.

func (*DeleteRepositoryPolicyOutput) SetRepositoryName added in v1.5.0

SetRepositoryName sets the RepositoryName field's value.

func (DeleteRepositoryPolicyOutput) String

String returns the string representation

type DescribeImagesFilter added in v1.4.16

type DescribeImagesFilter struct {

	// The tag status with which to filter your DescribeImages results. You can
	// filter results based on whether they are TAGGED or UNTAGGED.
	TagStatus *string `locationName:"tagStatus" type:"string" enum:"TagStatus"`
	// contains filtered or unexported fields
}

An object representing a filter on a DescribeImages operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/DescribeImagesFilter

func (DescribeImagesFilter) GoString added in v1.4.16

func (s DescribeImagesFilter) GoString() string

GoString returns the string representation

func (*DescribeImagesFilter) SetTagStatus added in v1.5.0

func (s *DescribeImagesFilter) SetTagStatus(v string) *DescribeImagesFilter

SetTagStatus sets the TagStatus field's value.

func (DescribeImagesFilter) String added in v1.4.16

func (s DescribeImagesFilter) String() string

String returns the string representation

type DescribeImagesInput added in v1.4.16

type DescribeImagesInput struct {

	// The filter key and value with which to filter your DescribeImages results.
	Filter *DescribeImagesFilter `locationName:"filter" type:"structure"`

	// The list of image IDs for the requested repository.
	ImageIds []*ImageIdentifier `locationName:"imageIds" min:"1" type:"list"`

	// The maximum number of repository results returned by DescribeImages in paginated
	// output. When this parameter is used, DescribeImages only returns maxResults
	// results in a single page along with a nextToken response element. The remaining
	// results of the initial request can be seen by sending another DescribeImages
	// request with the returned nextToken value. This value can be between 1 and
	// 100. If this parameter is not used, then DescribeImages returns up to 100
	// results and a nextToken value, if applicable.
	MaxResults *int64 `locationName:"maxResults" min:"1" type:"integer"`

	// The nextToken value returned from a previous paginated DescribeImages request
	// where maxResults was used and the results exceeded the value of that parameter.
	// Pagination continues from the end of the previous results that returned the
	// nextToken value. This value is null when there are no more results to return.
	NextToken *string `locationName:"nextToken" type:"string"`

	// The AWS account ID associated with the registry that contains the repository
	// in which to describe images. If you do not specify a registry, the default
	// registry is assumed.
	RegistryId *string `locationName:"registryId" type:"string"`

	// A list of repositories to describe. If this parameter is omitted, then all
	// repositories in a registry are described.
	//
	// RepositoryName is a required field
	RepositoryName *string `locationName:"repositoryName" min:"2" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/DescribeImagesRequest

func (DescribeImagesInput) GoString added in v1.4.16

func (s DescribeImagesInput) GoString() string

GoString returns the string representation

func (*DescribeImagesInput) SetFilter added in v1.5.0

SetFilter sets the Filter field's value.

func (*DescribeImagesInput) SetImageIds added in v1.5.0

SetImageIds sets the ImageIds field's value.

func (*DescribeImagesInput) SetMaxResults added in v1.5.0

func (s *DescribeImagesInput) SetMaxResults(v int64) *DescribeImagesInput

SetMaxResults sets the MaxResults field's value.

func (*DescribeImagesInput) SetNextToken added in v1.5.0

func (s *DescribeImagesInput) SetNextToken(v string) *DescribeImagesInput

SetNextToken sets the NextToken field's value.

func (*DescribeImagesInput) SetRegistryId added in v1.5.0

func (s *DescribeImagesInput) SetRegistryId(v string) *DescribeImagesInput

SetRegistryId sets the RegistryId field's value.

func (*DescribeImagesInput) SetRepositoryName added in v1.5.0

func (s *DescribeImagesInput) SetRepositoryName(v string) *DescribeImagesInput

SetRepositoryName sets the RepositoryName field's value.

func (DescribeImagesInput) String added in v1.4.16

func (s DescribeImagesInput) String() string

String returns the string representation

func (*DescribeImagesInput) Validate added in v1.4.16

func (s *DescribeImagesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeImagesOutput added in v1.4.16

type DescribeImagesOutput struct {

	// A list of ImageDetail objects that contain data about the image.
	ImageDetails []*ImageDetail `locationName:"imageDetails" type:"list"`

	// The nextToken value to include in a future DescribeImages request. When the
	// results of a DescribeImages request exceed maxResults, this value can be
	// used to retrieve the next page of results. This value is null when there
	// are no more results to return.
	NextToken *string `locationName:"nextToken" type:"string"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/DescribeImagesResponse

func (DescribeImagesOutput) GoString added in v1.4.16

func (s DescribeImagesOutput) GoString() string

GoString returns the string representation

func (*DescribeImagesOutput) SetImageDetails added in v1.5.0

func (s *DescribeImagesOutput) SetImageDetails(v []*ImageDetail) *DescribeImagesOutput

SetImageDetails sets the ImageDetails field's value.

func (*DescribeImagesOutput) SetNextToken added in v1.5.0

func (s *DescribeImagesOutput) SetNextToken(v string) *DescribeImagesOutput

SetNextToken sets the NextToken field's value.

func (DescribeImagesOutput) String added in v1.4.16

func (s DescribeImagesOutput) String() string

String returns the string representation

type DescribeRepositoriesInput

type DescribeRepositoriesInput struct {

	// The maximum number of repository results returned by DescribeRepositories
	// in paginated output. When this parameter is used, DescribeRepositories only
	// returns maxResults results in a single page along with a nextToken response
	// element. The remaining results of the initial request can be seen by sending
	// another DescribeRepositories request with the returned nextToken value. This
	// value can be between 1 and 100. If this parameter is not used, then DescribeRepositories
	// returns up to 100 results and a nextToken value, if applicable.
	MaxResults *int64 `locationName:"maxResults" min:"1" type:"integer"`

	// The nextToken value returned from a previous paginated DescribeRepositories
	// request where maxResults was used and the results exceeded the value of that
	// parameter. Pagination continues from the end of the previous results that
	// returned the nextToken value. This value is null when there are no more results
	// to return.
	//
	// This token should be treated as an opaque identifier that is only used to
	// retrieve the next items in a list and not for other programmatic purposes.
	NextToken *string `locationName:"nextToken" type:"string"`

	// The AWS account ID associated with the registry that contains the repositories
	// to be described. If you do not specify a registry, the default registry is
	// assumed.
	RegistryId *string `locationName:"registryId" type:"string"`

	// A list of repositories to describe. If this parameter is omitted, then all
	// repositories in a registry are described.
	RepositoryNames []*string `locationName:"repositoryNames" min:"1" type:"list"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/DescribeRepositoriesRequest

func (DescribeRepositoriesInput) GoString

func (s DescribeRepositoriesInput) GoString() string

GoString returns the string representation

func (*DescribeRepositoriesInput) SetMaxResults added in v1.5.0

SetMaxResults sets the MaxResults field's value.

func (*DescribeRepositoriesInput) SetNextToken added in v1.5.0

SetNextToken sets the NextToken field's value.

func (*DescribeRepositoriesInput) SetRegistryId added in v1.5.0

SetRegistryId sets the RegistryId field's value.

func (*DescribeRepositoriesInput) SetRepositoryNames added in v1.5.0

func (s *DescribeRepositoriesInput) SetRepositoryNames(v []*string) *DescribeRepositoriesInput

SetRepositoryNames sets the RepositoryNames field's value.

func (DescribeRepositoriesInput) String

func (s DescribeRepositoriesInput) String() string

String returns the string representation

func (*DescribeRepositoriesInput) Validate added in v1.1.22

func (s *DescribeRepositoriesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeRepositoriesOutput

type DescribeRepositoriesOutput struct {

	// The nextToken value to include in a future DescribeRepositories request.
	// When the results of a DescribeRepositories request exceed maxResults, this
	// value can be used to retrieve the next page of results. This value is null
	// when there are no more results to return.
	NextToken *string `locationName:"nextToken" type:"string"`

	// A list of repository objects corresponding to valid repositories.
	Repositories []*Repository `locationName:"repositories" type:"list"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/DescribeRepositoriesResponse

func (DescribeRepositoriesOutput) GoString

func (s DescribeRepositoriesOutput) GoString() string

GoString returns the string representation

func (*DescribeRepositoriesOutput) SetNextToken added in v1.5.0

SetNextToken sets the NextToken field's value.

func (*DescribeRepositoriesOutput) SetRepositories added in v1.5.0

SetRepositories sets the Repositories field's value.

func (DescribeRepositoriesOutput) String

String returns the string representation

type ECR

type ECR struct {
	*client.Client
}

Amazon EC2 Container Registry (Amazon ECR) is a managed AWS Docker registry service. Customers can use the familiar Docker CLI to push, pull, and manage images. Amazon ECR provides a secure, scalable, and reliable registry. Amazon ECR supports private Docker repositories with resource-based permissions using AWS IAM so that specific users or Amazon EC2 instances can access repositories and images. Developers can use the Docker CLI to author and manage images. The service client's operations are safe to be used concurrently. It is not safe to mutate any of the client's properties though. Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21

func New

func New(p client.ConfigProvider, cfgs ...*aws.Config) *ECR

New creates a new instance of the ECR client with a session. If additional configuration is needed for the client instance use the optional aws.Config parameter to add your extra config.

Example:

// Create a ECR client from just a session.
svc := ecr.New(mySession)

// Create a ECR client with additional configuration
svc := ecr.New(mySession, aws.NewConfig().WithRegion("us-west-2"))

func (*ECR) BatchCheckLayerAvailability

func (c *ECR) BatchCheckLayerAvailability(input *BatchCheckLayerAvailabilityInput) (*BatchCheckLayerAvailabilityOutput, error)

BatchCheckLayerAvailability API operation for Amazon EC2 Container Registry.

Check the availability of multiple image layers in a specified registry and repository.

This operation is used by the Amazon ECR proxy, and it is not intended for general use by customers for pulling and pushing images. In most cases, you should use the docker CLI to pull, tag, and push images.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Registry's API operation BatchCheckLayerAvailability for usage and error information.

Returned Error Codes:

  • ErrCodeRepositoryNotFoundException "RepositoryNotFoundException" The specified repository could not be found. Check the spelling of the specified repository and ensure that you are performing operations on the correct registry.

  • ErrCodeInvalidParameterException "InvalidParameterException" The specified parameter is invalid. Review the available parameters for the API request.

  • ErrCodeServerException "ServerException" These errors are usually caused by a server-side issue.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/BatchCheckLayerAvailability

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ecr"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := ecr.New(sess)

	params := &ecr.BatchCheckLayerAvailabilityInput{
		LayerDigests: []*string{ // Required
			aws.String("BatchedOperationLayerDigest"), // Required
			// More values...
		},
		RepositoryName: aws.String("RepositoryName"), // Required
		RegistryId:     aws.String("RegistryId"),
	}
	resp, err := svc.BatchCheckLayerAvailability(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*ECR) BatchCheckLayerAvailabilityRequest

func (c *ECR) BatchCheckLayerAvailabilityRequest(input *BatchCheckLayerAvailabilityInput) (req *request.Request, output *BatchCheckLayerAvailabilityOutput)

BatchCheckLayerAvailabilityRequest generates a "aws/request.Request" representing the client's request for the BatchCheckLayerAvailability operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See BatchCheckLayerAvailability for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the BatchCheckLayerAvailability method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the BatchCheckLayerAvailabilityRequest method.
req, resp := client.BatchCheckLayerAvailabilityRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/BatchCheckLayerAvailability

func (*ECR) BatchDeleteImage

func (c *ECR) BatchDeleteImage(input *BatchDeleteImageInput) (*BatchDeleteImageOutput, error)

BatchDeleteImage API operation for Amazon EC2 Container Registry.

Deletes a list of specified images within a specified repository. Images are specified with either imageTag or imageDigest.

You can remove a tag from an image by specifying the image's tag in your request. When you remove the last tag from an image, the image is deleted from your repository.

You can completely delete an image (and all of its tags) by specifying the image's digest in your request.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Registry's API operation BatchDeleteImage for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" These errors are usually caused by a server-side issue.

  • ErrCodeInvalidParameterException "InvalidParameterException" The specified parameter is invalid. Review the available parameters for the API request.

  • ErrCodeRepositoryNotFoundException "RepositoryNotFoundException" The specified repository could not be found. Check the spelling of the specified repository and ensure that you are performing operations on the correct registry.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/BatchDeleteImage

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ecr"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := ecr.New(sess)

	params := &ecr.BatchDeleteImageInput{
		ImageIds: []*ecr.ImageIdentifier{ // Required
			{ // Required
				ImageDigest: aws.String("ImageDigest"),
				ImageTag:    aws.String("ImageTag"),
			},
			// More values...
		},
		RepositoryName: aws.String("RepositoryName"), // Required
		RegistryId:     aws.String("RegistryId"),
	}
	resp, err := svc.BatchDeleteImage(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*ECR) BatchDeleteImageRequest

func (c *ECR) BatchDeleteImageRequest(input *BatchDeleteImageInput) (req *request.Request, output *BatchDeleteImageOutput)

BatchDeleteImageRequest generates a "aws/request.Request" representing the client's request for the BatchDeleteImage operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See BatchDeleteImage for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the BatchDeleteImage method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the BatchDeleteImageRequest method.
req, resp := client.BatchDeleteImageRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/BatchDeleteImage

func (*ECR) BatchGetImage

func (c *ECR) BatchGetImage(input *BatchGetImageInput) (*BatchGetImageOutput, error)

BatchGetImage API operation for Amazon EC2 Container Registry.

Gets detailed information for specified images within a specified repository. Images are specified with either imageTag or imageDigest.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Registry's API operation BatchGetImage for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" These errors are usually caused by a server-side issue.

  • ErrCodeInvalidParameterException "InvalidParameterException" The specified parameter is invalid. Review the available parameters for the API request.

  • ErrCodeRepositoryNotFoundException "RepositoryNotFoundException" The specified repository could not be found. Check the spelling of the specified repository and ensure that you are performing operations on the correct registry.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/BatchGetImage

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ecr"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := ecr.New(sess)

	params := &ecr.BatchGetImageInput{
		ImageIds: []*ecr.ImageIdentifier{ // Required
			{ // Required
				ImageDigest: aws.String("ImageDigest"),
				ImageTag:    aws.String("ImageTag"),
			},
			// More values...
		},
		RepositoryName: aws.String("RepositoryName"), // Required
		AcceptedMediaTypes: []*string{
			aws.String("MediaType"), // Required
			// More values...
		},
		RegistryId: aws.String("RegistryId"),
	}
	resp, err := svc.BatchGetImage(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*ECR) BatchGetImageRequest

func (c *ECR) BatchGetImageRequest(input *BatchGetImageInput) (req *request.Request, output *BatchGetImageOutput)

BatchGetImageRequest generates a "aws/request.Request" representing the client's request for the BatchGetImage operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See BatchGetImage for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the BatchGetImage method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the BatchGetImageRequest method.
req, resp := client.BatchGetImageRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/BatchGetImage

func (*ECR) CompleteLayerUpload

func (c *ECR) CompleteLayerUpload(input *CompleteLayerUploadInput) (*CompleteLayerUploadOutput, error)

CompleteLayerUpload API operation for Amazon EC2 Container Registry.

Inform Amazon ECR that the image layer upload for a specified registry, repository name, and upload ID, has completed. You can optionally provide a sha256 digest of the image layer for data validation purposes.

This operation is used by the Amazon ECR proxy, and it is not intended for general use by customers for pulling and pushing images. In most cases, you should use the docker CLI to pull, tag, and push images.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Registry's API operation CompleteLayerUpload for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" These errors are usually caused by a server-side issue.

  • ErrCodeInvalidParameterException "InvalidParameterException" The specified parameter is invalid. Review the available parameters for the API request.

  • ErrCodeRepositoryNotFoundException "RepositoryNotFoundException" The specified repository could not be found. Check the spelling of the specified repository and ensure that you are performing operations on the correct registry.

  • ErrCodeUploadNotFoundException "UploadNotFoundException" The upload could not be found, or the specified upload id is not valid for this repository.

  • ErrCodeInvalidLayerException "InvalidLayerException" The layer digest calculation performed by Amazon ECR upon receipt of the image layer does not match the digest specified.

  • ErrCodeLayerPartTooSmallException "LayerPartTooSmallException" Layer parts must be at least 5 MiB in size.

  • ErrCodeLayerAlreadyExistsException "LayerAlreadyExistsException" The image layer already exists in the associated repository.

  • ErrCodeEmptyUploadException "EmptyUploadException" The specified layer upload does not contain any layer parts.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/CompleteLayerUpload

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ecr"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := ecr.New(sess)

	params := &ecr.CompleteLayerUploadInput{
		LayerDigests: []*string{ // Required
			aws.String("LayerDigest"), // Required
			// More values...
		},
		RepositoryName: aws.String("RepositoryName"), // Required
		UploadId:       aws.String("UploadId"),       // Required
		RegistryId:     aws.String("RegistryId"),
	}
	resp, err := svc.CompleteLayerUpload(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*ECR) CompleteLayerUploadRequest

func (c *ECR) CompleteLayerUploadRequest(input *CompleteLayerUploadInput) (req *request.Request, output *CompleteLayerUploadOutput)

CompleteLayerUploadRequest generates a "aws/request.Request" representing the client's request for the CompleteLayerUpload operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See CompleteLayerUpload for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CompleteLayerUpload method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the CompleteLayerUploadRequest method.
req, resp := client.CompleteLayerUploadRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/CompleteLayerUpload

func (*ECR) CreateRepository

func (c *ECR) CreateRepository(input *CreateRepositoryInput) (*CreateRepositoryOutput, error)

CreateRepository API operation for Amazon EC2 Container Registry.

Creates an image repository.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Registry's API operation CreateRepository for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" These errors are usually caused by a server-side issue.

  • ErrCodeInvalidParameterException "InvalidParameterException" The specified parameter is invalid. Review the available parameters for the API request.

  • ErrCodeRepositoryAlreadyExistsException "RepositoryAlreadyExistsException" The specified repository already exists in the specified registry.

  • ErrCodeLimitExceededException "LimitExceededException" The operation did not succeed because it would have exceeded a service limit for your account. For more information, see Amazon ECR Default Service Limits (http://docs.aws.amazon.com/AmazonECR/latest/userguide/service_limits.html) in the Amazon EC2 Container Registry User Guide.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/CreateRepository

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ecr"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := ecr.New(sess)

	params := &ecr.CreateRepositoryInput{
		RepositoryName: aws.String("RepositoryName"), // Required
	}
	resp, err := svc.CreateRepository(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*ECR) CreateRepositoryRequest

func (c *ECR) CreateRepositoryRequest(input *CreateRepositoryInput) (req *request.Request, output *CreateRepositoryOutput)

CreateRepositoryRequest generates a "aws/request.Request" representing the client's request for the CreateRepository operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See CreateRepository for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateRepository method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the CreateRepositoryRequest method.
req, resp := client.CreateRepositoryRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/CreateRepository

func (*ECR) DeleteRepository

func (c *ECR) DeleteRepository(input *DeleteRepositoryInput) (*DeleteRepositoryOutput, error)

DeleteRepository API operation for Amazon EC2 Container Registry.

Deletes an existing image repository. If a repository contains images, you must use the force option to delete it.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Registry's API operation DeleteRepository for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" These errors are usually caused by a server-side issue.

  • ErrCodeInvalidParameterException "InvalidParameterException" The specified parameter is invalid. Review the available parameters for the API request.

  • ErrCodeRepositoryNotFoundException "RepositoryNotFoundException" The specified repository could not be found. Check the spelling of the specified repository and ensure that you are performing operations on the correct registry.

  • ErrCodeRepositoryNotEmptyException "RepositoryNotEmptyException" The specified repository contains images. To delete a repository that contains images, you must force the deletion with the force parameter.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/DeleteRepository

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ecr"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := ecr.New(sess)

	params := &ecr.DeleteRepositoryInput{
		RepositoryName: aws.String("RepositoryName"), // Required
		Force:          aws.Bool(true),
		RegistryId:     aws.String("RegistryId"),
	}
	resp, err := svc.DeleteRepository(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*ECR) DeleteRepositoryPolicy

func (c *ECR) DeleteRepositoryPolicy(input *DeleteRepositoryPolicyInput) (*DeleteRepositoryPolicyOutput, error)

DeleteRepositoryPolicy API operation for Amazon EC2 Container Registry.

Deletes the repository policy from a specified repository.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Registry's API operation DeleteRepositoryPolicy for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" These errors are usually caused by a server-side issue.

  • ErrCodeInvalidParameterException "InvalidParameterException" The specified parameter is invalid. Review the available parameters for the API request.

  • ErrCodeRepositoryNotFoundException "RepositoryNotFoundException" The specified repository could not be found. Check the spelling of the specified repository and ensure that you are performing operations on the correct registry.

  • ErrCodeRepositoryPolicyNotFoundException "RepositoryPolicyNotFoundException" The specified repository and registry combination does not have an associated repository policy.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/DeleteRepositoryPolicy

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ecr"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := ecr.New(sess)

	params := &ecr.DeleteRepositoryPolicyInput{
		RepositoryName: aws.String("RepositoryName"), // Required
		RegistryId:     aws.String("RegistryId"),
	}
	resp, err := svc.DeleteRepositoryPolicy(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*ECR) DeleteRepositoryPolicyRequest

func (c *ECR) DeleteRepositoryPolicyRequest(input *DeleteRepositoryPolicyInput) (req *request.Request, output *DeleteRepositoryPolicyOutput)

DeleteRepositoryPolicyRequest generates a "aws/request.Request" representing the client's request for the DeleteRepositoryPolicy operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DeleteRepositoryPolicy for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteRepositoryPolicy method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DeleteRepositoryPolicyRequest method.
req, resp := client.DeleteRepositoryPolicyRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/DeleteRepositoryPolicy

func (*ECR) DeleteRepositoryRequest

func (c *ECR) DeleteRepositoryRequest(input *DeleteRepositoryInput) (req *request.Request, output *DeleteRepositoryOutput)

DeleteRepositoryRequest generates a "aws/request.Request" representing the client's request for the DeleteRepository operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DeleteRepository for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteRepository method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DeleteRepositoryRequest method.
req, resp := client.DeleteRepositoryRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/DeleteRepository

func (*ECR) DescribeImages added in v1.4.16

func (c *ECR) DescribeImages(input *DescribeImagesInput) (*DescribeImagesOutput, error)

DescribeImages API operation for Amazon EC2 Container Registry.

Returns metadata about the images in a repository, including image size, image tags, and creation date.

Beginning with Docker version 1.9, the Docker client compresses image layers before pushing them to a V2 Docker registry. The output of the docker images command shows the uncompressed image size, so it may return a larger image size than the image sizes returned by DescribeImages.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Registry's API operation DescribeImages for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" These errors are usually caused by a server-side issue.

  • ErrCodeInvalidParameterException "InvalidParameterException" The specified parameter is invalid. Review the available parameters for the API request.

  • ErrCodeRepositoryNotFoundException "RepositoryNotFoundException" The specified repository could not be found. Check the spelling of the specified repository and ensure that you are performing operations on the correct registry.

  • ErrCodeImageNotFoundException "ImageNotFoundException" The image requested does not exist in the specified repository.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/DescribeImages

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ecr"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := ecr.New(sess)

	params := &ecr.DescribeImagesInput{
		RepositoryName: aws.String("RepositoryName"), // Required
		Filter: &ecr.DescribeImagesFilter{
			TagStatus: aws.String("TagStatus"),
		},
		ImageIds: []*ecr.ImageIdentifier{
			{ // Required
				ImageDigest: aws.String("ImageDigest"),
				ImageTag:    aws.String("ImageTag"),
			},
			// More values...
		},
		MaxResults: aws.Int64(1),
		NextToken:  aws.String("NextToken"),
		RegistryId: aws.String("RegistryId"),
	}
	resp, err := svc.DescribeImages(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*ECR) DescribeImagesPages added in v1.5.0

func (c *ECR) DescribeImagesPages(input *DescribeImagesInput, fn func(p *DescribeImagesOutput, lastPage bool) (shouldContinue bool)) error

DescribeImagesPages iterates over the pages of a DescribeImages operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See DescribeImages method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service.

// Example iterating over at most 3 pages of a DescribeImages operation.
pageNum := 0
err := client.DescribeImagesPages(params,
    func(page *DescribeImagesOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*ECR) DescribeImagesRequest added in v1.4.16

func (c *ECR) DescribeImagesRequest(input *DescribeImagesInput) (req *request.Request, output *DescribeImagesOutput)

DescribeImagesRequest generates a "aws/request.Request" representing the client's request for the DescribeImages operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeImages for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeImages method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeImagesRequest method.
req, resp := client.DescribeImagesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/DescribeImages

func (*ECR) DescribeRepositories

func (c *ECR) DescribeRepositories(input *DescribeRepositoriesInput) (*DescribeRepositoriesOutput, error)

DescribeRepositories API operation for Amazon EC2 Container Registry.

Describes image repositories in a registry.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Registry's API operation DescribeRepositories for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" These errors are usually caused by a server-side issue.

  • ErrCodeInvalidParameterException "InvalidParameterException" The specified parameter is invalid. Review the available parameters for the API request.

  • ErrCodeRepositoryNotFoundException "RepositoryNotFoundException" The specified repository could not be found. Check the spelling of the specified repository and ensure that you are performing operations on the correct registry.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/DescribeRepositories

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ecr"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := ecr.New(sess)

	params := &ecr.DescribeRepositoriesInput{
		MaxResults: aws.Int64(1),
		NextToken:  aws.String("NextToken"),
		RegistryId: aws.String("RegistryId"),
		RepositoryNames: []*string{
			aws.String("RepositoryName"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeRepositories(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*ECR) DescribeRepositoriesPages added in v1.5.0

func (c *ECR) DescribeRepositoriesPages(input *DescribeRepositoriesInput, fn func(p *DescribeRepositoriesOutput, lastPage bool) (shouldContinue bool)) error

DescribeRepositoriesPages iterates over the pages of a DescribeRepositories operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See DescribeRepositories method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service.

// Example iterating over at most 3 pages of a DescribeRepositories operation.
pageNum := 0
err := client.DescribeRepositoriesPages(params,
    func(page *DescribeRepositoriesOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*ECR) DescribeRepositoriesRequest

func (c *ECR) DescribeRepositoriesRequest(input *DescribeRepositoriesInput) (req *request.Request, output *DescribeRepositoriesOutput)

DescribeRepositoriesRequest generates a "aws/request.Request" representing the client's request for the DescribeRepositories operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeRepositories for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeRepositories method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeRepositoriesRequest method.
req, resp := client.DescribeRepositoriesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/DescribeRepositories

func (*ECR) GetAuthorizationToken

func (c *ECR) GetAuthorizationToken(input *GetAuthorizationTokenInput) (*GetAuthorizationTokenOutput, error)

GetAuthorizationToken API operation for Amazon EC2 Container Registry.

Retrieves a token that is valid for a specified registry for 12 hours. This command allows you to use the docker CLI to push and pull images with Amazon ECR. If you do not specify a registry, the default registry is assumed.

The authorizationToken returned for each registry specified is a base64 encoded string that can be decoded and used in a docker login command to authenticate to a registry. The AWS CLI offers an aws ecr get-login command that simplifies the login process.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Registry's API operation GetAuthorizationToken for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" These errors are usually caused by a server-side issue.

  • ErrCodeInvalidParameterException "InvalidParameterException" The specified parameter is invalid. Review the available parameters for the API request.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/GetAuthorizationToken

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ecr"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := ecr.New(sess)

	params := &ecr.GetAuthorizationTokenInput{
		RegistryIds: []*string{
			aws.String("RegistryId"), // Required
			// More values...
		},
	}
	resp, err := svc.GetAuthorizationToken(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*ECR) GetAuthorizationTokenRequest

func (c *ECR) GetAuthorizationTokenRequest(input *GetAuthorizationTokenInput) (req *request.Request, output *GetAuthorizationTokenOutput)

GetAuthorizationTokenRequest generates a "aws/request.Request" representing the client's request for the GetAuthorizationToken operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See GetAuthorizationToken for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetAuthorizationToken method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the GetAuthorizationTokenRequest method.
req, resp := client.GetAuthorizationTokenRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/GetAuthorizationToken

func (*ECR) GetDownloadUrlForLayer

func (c *ECR) GetDownloadUrlForLayer(input *GetDownloadUrlForLayerInput) (*GetDownloadUrlForLayerOutput, error)

GetDownloadUrlForLayer API operation for Amazon EC2 Container Registry.

Retrieves the pre-signed Amazon S3 download URL corresponding to an image layer. You can only get URLs for image layers that are referenced in an image.

This operation is used by the Amazon ECR proxy, and it is not intended for general use by customers for pulling and pushing images. In most cases, you should use the docker CLI to pull, tag, and push images.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Registry's API operation GetDownloadUrlForLayer for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" These errors are usually caused by a server-side issue.

  • ErrCodeInvalidParameterException "InvalidParameterException" The specified parameter is invalid. Review the available parameters for the API request.

  • ErrCodeLayersNotFoundException "LayersNotFoundException" The specified layers could not be found, or the specified layer is not valid for this repository.

  • ErrCodeLayerInaccessibleException "LayerInaccessibleException" The specified layer is not available because it is not associated with an image. Unassociated image layers may be cleaned up at any time.

  • ErrCodeRepositoryNotFoundException "RepositoryNotFoundException" The specified repository could not be found. Check the spelling of the specified repository and ensure that you are performing operations on the correct registry.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/GetDownloadUrlForLayer

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ecr"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := ecr.New(sess)

	params := &ecr.GetDownloadUrlForLayerInput{
		LayerDigest:    aws.String("LayerDigest"),    // Required
		RepositoryName: aws.String("RepositoryName"), // Required
		RegistryId:     aws.String("RegistryId"),
	}
	resp, err := svc.GetDownloadUrlForLayer(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*ECR) GetDownloadUrlForLayerRequest

func (c *ECR) GetDownloadUrlForLayerRequest(input *GetDownloadUrlForLayerInput) (req *request.Request, output *GetDownloadUrlForLayerOutput)

GetDownloadUrlForLayerRequest generates a "aws/request.Request" representing the client's request for the GetDownloadUrlForLayer operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See GetDownloadUrlForLayer for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetDownloadUrlForLayer method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the GetDownloadUrlForLayerRequest method.
req, resp := client.GetDownloadUrlForLayerRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/GetDownloadUrlForLayer

func (*ECR) GetRepositoryPolicy

func (c *ECR) GetRepositoryPolicy(input *GetRepositoryPolicyInput) (*GetRepositoryPolicyOutput, error)

GetRepositoryPolicy API operation for Amazon EC2 Container Registry.

Retrieves the repository policy for a specified repository.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Registry's API operation GetRepositoryPolicy for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" These errors are usually caused by a server-side issue.

  • ErrCodeInvalidParameterException "InvalidParameterException" The specified parameter is invalid. Review the available parameters for the API request.

  • ErrCodeRepositoryNotFoundException "RepositoryNotFoundException" The specified repository could not be found. Check the spelling of the specified repository and ensure that you are performing operations on the correct registry.

  • ErrCodeRepositoryPolicyNotFoundException "RepositoryPolicyNotFoundException" The specified repository and registry combination does not have an associated repository policy.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/GetRepositoryPolicy

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ecr"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := ecr.New(sess)

	params := &ecr.GetRepositoryPolicyInput{
		RepositoryName: aws.String("RepositoryName"), // Required
		RegistryId:     aws.String("RegistryId"),
	}
	resp, err := svc.GetRepositoryPolicy(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*ECR) GetRepositoryPolicyRequest

func (c *ECR) GetRepositoryPolicyRequest(input *GetRepositoryPolicyInput) (req *request.Request, output *GetRepositoryPolicyOutput)

GetRepositoryPolicyRequest generates a "aws/request.Request" representing the client's request for the GetRepositoryPolicy operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See GetRepositoryPolicy for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetRepositoryPolicy method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the GetRepositoryPolicyRequest method.
req, resp := client.GetRepositoryPolicyRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/GetRepositoryPolicy

func (*ECR) InitiateLayerUpload

func (c *ECR) InitiateLayerUpload(input *InitiateLayerUploadInput) (*InitiateLayerUploadOutput, error)

InitiateLayerUpload API operation for Amazon EC2 Container Registry.

Notify Amazon ECR that you intend to upload an image layer.

This operation is used by the Amazon ECR proxy, and it is not intended for general use by customers for pulling and pushing images. In most cases, you should use the docker CLI to pull, tag, and push images.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Registry's API operation InitiateLayerUpload for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" These errors are usually caused by a server-side issue.

  • ErrCodeInvalidParameterException "InvalidParameterException" The specified parameter is invalid. Review the available parameters for the API request.

  • ErrCodeRepositoryNotFoundException "RepositoryNotFoundException" The specified repository could not be found. Check the spelling of the specified repository and ensure that you are performing operations on the correct registry.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/InitiateLayerUpload

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ecr"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := ecr.New(sess)

	params := &ecr.InitiateLayerUploadInput{
		RepositoryName: aws.String("RepositoryName"), // Required
		RegistryId:     aws.String("RegistryId"),
	}
	resp, err := svc.InitiateLayerUpload(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*ECR) InitiateLayerUploadRequest

func (c *ECR) InitiateLayerUploadRequest(input *InitiateLayerUploadInput) (req *request.Request, output *InitiateLayerUploadOutput)

InitiateLayerUploadRequest generates a "aws/request.Request" representing the client's request for the InitiateLayerUpload operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See InitiateLayerUpload for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the InitiateLayerUpload method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the InitiateLayerUploadRequest method.
req, resp := client.InitiateLayerUploadRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/InitiateLayerUpload

func (*ECR) ListImages

func (c *ECR) ListImages(input *ListImagesInput) (*ListImagesOutput, error)

ListImages API operation for Amazon EC2 Container Registry.

Lists all the image IDs for a given repository.

You can filter images based on whether or not they are tagged by setting the tagStatus parameter to TAGGED or UNTAGGED. For example, you can filter your results to return only UNTAGGED images and then pipe that result to a BatchDeleteImage operation to delete them. Or, you can filter your results to return only TAGGED images to list all of the tags in your repository.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Registry's API operation ListImages for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" These errors are usually caused by a server-side issue.

  • ErrCodeInvalidParameterException "InvalidParameterException" The specified parameter is invalid. Review the available parameters for the API request.

  • ErrCodeRepositoryNotFoundException "RepositoryNotFoundException" The specified repository could not be found. Check the spelling of the specified repository and ensure that you are performing operations on the correct registry.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/ListImages

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ecr"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := ecr.New(sess)

	params := &ecr.ListImagesInput{
		RepositoryName: aws.String("RepositoryName"), // Required
		Filter: &ecr.ListImagesFilter{
			TagStatus: aws.String("TagStatus"),
		},
		MaxResults: aws.Int64(1),
		NextToken:  aws.String("NextToken"),
		RegistryId: aws.String("RegistryId"),
	}
	resp, err := svc.ListImages(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*ECR) ListImagesPages added in v1.5.0

func (c *ECR) ListImagesPages(input *ListImagesInput, fn func(p *ListImagesOutput, lastPage bool) (shouldContinue bool)) error

ListImagesPages iterates over the pages of a ListImages operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See ListImages method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service.

// Example iterating over at most 3 pages of a ListImages operation.
pageNum := 0
err := client.ListImagesPages(params,
    func(page *ListImagesOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*ECR) ListImagesRequest

func (c *ECR) ListImagesRequest(input *ListImagesInput) (req *request.Request, output *ListImagesOutput)

ListImagesRequest generates a "aws/request.Request" representing the client's request for the ListImages operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See ListImages for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListImages method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the ListImagesRequest method.
req, resp := client.ListImagesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/ListImages

func (*ECR) PutImage

func (c *ECR) PutImage(input *PutImageInput) (*PutImageOutput, error)

PutImage API operation for Amazon EC2 Container Registry.

Creates or updates the image manifest and tags associated with an image.

This operation is used by the Amazon ECR proxy, and it is not intended for general use by customers for pulling and pushing images. In most cases, you should use the docker CLI to pull, tag, and push images.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Registry's API operation PutImage for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" These errors are usually caused by a server-side issue.

  • ErrCodeInvalidParameterException "InvalidParameterException" The specified parameter is invalid. Review the available parameters for the API request.

  • ErrCodeRepositoryNotFoundException "RepositoryNotFoundException" The specified repository could not be found. Check the spelling of the specified repository and ensure that you are performing operations on the correct registry.

  • ErrCodeImageAlreadyExistsException "ImageAlreadyExistsException" The specified image has already been pushed, and there are no changes to the manifest or image tag since the last push.

  • ErrCodeLayersNotFoundException "LayersNotFoundException" The specified layers could not be found, or the specified layer is not valid for this repository.

  • ErrCodeLimitExceededException "LimitExceededException" The operation did not succeed because it would have exceeded a service limit for your account. For more information, see Amazon ECR Default Service Limits (http://docs.aws.amazon.com/AmazonECR/latest/userguide/service_limits.html) in the Amazon EC2 Container Registry User Guide.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/PutImage

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ecr"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := ecr.New(sess)

	params := &ecr.PutImageInput{
		ImageManifest:  aws.String("ImageManifest"),  // Required
		RepositoryName: aws.String("RepositoryName"), // Required
		ImageTag:       aws.String("ImageTag"),
		RegistryId:     aws.String("RegistryId"),
	}
	resp, err := svc.PutImage(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*ECR) PutImageRequest

func (c *ECR) PutImageRequest(input *PutImageInput) (req *request.Request, output *PutImageOutput)

PutImageRequest generates a "aws/request.Request" representing the client's request for the PutImage operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See PutImage for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the PutImage method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the PutImageRequest method.
req, resp := client.PutImageRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/PutImage

func (*ECR) SetRepositoryPolicy

func (c *ECR) SetRepositoryPolicy(input *SetRepositoryPolicyInput) (*SetRepositoryPolicyOutput, error)

SetRepositoryPolicy API operation for Amazon EC2 Container Registry.

Applies a repository policy on a specified repository to control access permissions.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Registry's API operation SetRepositoryPolicy for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" These errors are usually caused by a server-side issue.

  • ErrCodeInvalidParameterException "InvalidParameterException" The specified parameter is invalid. Review the available parameters for the API request.

  • ErrCodeRepositoryNotFoundException "RepositoryNotFoundException" The specified repository could not be found. Check the spelling of the specified repository and ensure that you are performing operations on the correct registry.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/SetRepositoryPolicy

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ecr"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := ecr.New(sess)

	params := &ecr.SetRepositoryPolicyInput{
		PolicyText:     aws.String("RepositoryPolicyText"), // Required
		RepositoryName: aws.String("RepositoryName"),       // Required
		Force:          aws.Bool(true),
		RegistryId:     aws.String("RegistryId"),
	}
	resp, err := svc.SetRepositoryPolicy(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*ECR) SetRepositoryPolicyRequest

func (c *ECR) SetRepositoryPolicyRequest(input *SetRepositoryPolicyInput) (req *request.Request, output *SetRepositoryPolicyOutput)

SetRepositoryPolicyRequest generates a "aws/request.Request" representing the client's request for the SetRepositoryPolicy operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See SetRepositoryPolicy for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the SetRepositoryPolicy method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the SetRepositoryPolicyRequest method.
req, resp := client.SetRepositoryPolicyRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/SetRepositoryPolicy

func (*ECR) UploadLayerPart

func (c *ECR) UploadLayerPart(input *UploadLayerPartInput) (*UploadLayerPartOutput, error)

UploadLayerPart API operation for Amazon EC2 Container Registry.

Uploads an image layer part to Amazon ECR.

This operation is used by the Amazon ECR proxy, and it is not intended for general use by customers for pulling and pushing images. In most cases, you should use the docker CLI to pull, tag, and push images.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Registry's API operation UploadLayerPart for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" These errors are usually caused by a server-side issue.

  • ErrCodeInvalidParameterException "InvalidParameterException" The specified parameter is invalid. Review the available parameters for the API request.

  • ErrCodeInvalidLayerPartException "InvalidLayerPartException" The layer part size is not valid, or the first byte specified is not consecutive to the last byte of a previous layer part upload.

  • ErrCodeRepositoryNotFoundException "RepositoryNotFoundException" The specified repository could not be found. Check the spelling of the specified repository and ensure that you are performing operations on the correct registry.

  • ErrCodeUploadNotFoundException "UploadNotFoundException" The upload could not be found, or the specified upload id is not valid for this repository.

  • ErrCodeLimitExceededException "LimitExceededException" The operation did not succeed because it would have exceeded a service limit for your account. For more information, see Amazon ECR Default Service Limits (http://docs.aws.amazon.com/AmazonECR/latest/userguide/service_limits.html) in the Amazon EC2 Container Registry User Guide.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/UploadLayerPart

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ecr"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := ecr.New(sess)

	params := &ecr.UploadLayerPartInput{
		LayerPartBlob:  []byte("PAYLOAD"),            // Required
		PartFirstByte:  aws.Int64(1),                 // Required
		PartLastByte:   aws.Int64(1),                 // Required
		RepositoryName: aws.String("RepositoryName"), // Required
		UploadId:       aws.String("UploadId"),       // Required
		RegistryId:     aws.String("RegistryId"),
	}
	resp, err := svc.UploadLayerPart(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*ECR) UploadLayerPartRequest

func (c *ECR) UploadLayerPartRequest(input *UploadLayerPartInput) (req *request.Request, output *UploadLayerPartOutput)

UploadLayerPartRequest generates a "aws/request.Request" representing the client's request for the UploadLayerPart operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See UploadLayerPart for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the UploadLayerPart method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the UploadLayerPartRequest method.
req, resp := client.UploadLayerPartRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/UploadLayerPart

type GetAuthorizationTokenInput

type GetAuthorizationTokenInput struct {

	// A list of AWS account IDs that are associated with the registries for which
	// to get authorization tokens. If you do not specify a registry, the default
	// registry is assumed.
	RegistryIds []*string `locationName:"registryIds" min:"1" type:"list"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/GetAuthorizationTokenRequest

func (GetAuthorizationTokenInput) GoString

func (s GetAuthorizationTokenInput) GoString() string

GoString returns the string representation

func (*GetAuthorizationTokenInput) SetRegistryIds added in v1.5.0

SetRegistryIds sets the RegistryIds field's value.

func (GetAuthorizationTokenInput) String

String returns the string representation

func (*GetAuthorizationTokenInput) Validate added in v1.1.22

func (s *GetAuthorizationTokenInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetAuthorizationTokenOutput

type GetAuthorizationTokenOutput struct {

	// A list of authorization token data objects that correspond to the registryIds
	// values in the request.
	AuthorizationData []*AuthorizationData `locationName:"authorizationData" type:"list"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/GetAuthorizationTokenResponse

func (GetAuthorizationTokenOutput) GoString

func (s GetAuthorizationTokenOutput) GoString() string

GoString returns the string representation

func (*GetAuthorizationTokenOutput) SetAuthorizationData added in v1.5.0

SetAuthorizationData sets the AuthorizationData field's value.

func (GetAuthorizationTokenOutput) String

String returns the string representation

type GetDownloadUrlForLayerInput

type GetDownloadUrlForLayerInput struct {

	// The digest of the image layer to download.
	//
	// LayerDigest is a required field
	LayerDigest *string `locationName:"layerDigest" type:"string" required:"true"`

	// The AWS account ID associated with the registry that contains the image layer
	// to download. If you do not specify a registry, the default registry is assumed.
	RegistryId *string `locationName:"registryId" type:"string"`

	// The name of the repository that is associated with the image layer to download.
	//
	// RepositoryName is a required field
	RepositoryName *string `locationName:"repositoryName" min:"2" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/GetDownloadUrlForLayerRequest

func (GetDownloadUrlForLayerInput) GoString

func (s GetDownloadUrlForLayerInput) GoString() string

GoString returns the string representation

func (*GetDownloadUrlForLayerInput) SetLayerDigest added in v1.5.0

SetLayerDigest sets the LayerDigest field's value.

func (*GetDownloadUrlForLayerInput) SetRegistryId added in v1.5.0

SetRegistryId sets the RegistryId field's value.

func (*GetDownloadUrlForLayerInput) SetRepositoryName added in v1.5.0

SetRepositoryName sets the RepositoryName field's value.

func (GetDownloadUrlForLayerInput) String

String returns the string representation

func (*GetDownloadUrlForLayerInput) Validate added in v1.1.22

func (s *GetDownloadUrlForLayerInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetDownloadUrlForLayerOutput

type GetDownloadUrlForLayerOutput struct {

	// The pre-signed Amazon S3 download URL for the requested layer.
	DownloadUrl *string `locationName:"downloadUrl" type:"string"`

	// The digest of the image layer to download.
	LayerDigest *string `locationName:"layerDigest" type:"string"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/GetDownloadUrlForLayerResponse

func (GetDownloadUrlForLayerOutput) GoString

func (s GetDownloadUrlForLayerOutput) GoString() string

GoString returns the string representation

func (*GetDownloadUrlForLayerOutput) SetDownloadUrl added in v1.5.0

SetDownloadUrl sets the DownloadUrl field's value.

func (*GetDownloadUrlForLayerOutput) SetLayerDigest added in v1.5.0

SetLayerDigest sets the LayerDigest field's value.

func (GetDownloadUrlForLayerOutput) String

String returns the string representation

type GetRepositoryPolicyInput

type GetRepositoryPolicyInput struct {

	// The AWS account ID associated with the registry that contains the repository.
	// If you do not specify a registry, the default registry is assumed.
	RegistryId *string `locationName:"registryId" type:"string"`

	// The name of the repository whose policy you want to retrieve.
	//
	// RepositoryName is a required field
	RepositoryName *string `locationName:"repositoryName" min:"2" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/GetRepositoryPolicyRequest

func (GetRepositoryPolicyInput) GoString

func (s GetRepositoryPolicyInput) GoString() string

GoString returns the string representation

func (*GetRepositoryPolicyInput) SetRegistryId added in v1.5.0

SetRegistryId sets the RegistryId field's value.

func (*GetRepositoryPolicyInput) SetRepositoryName added in v1.5.0

func (s *GetRepositoryPolicyInput) SetRepositoryName(v string) *GetRepositoryPolicyInput

SetRepositoryName sets the RepositoryName field's value.

func (GetRepositoryPolicyInput) String

func (s GetRepositoryPolicyInput) String() string

String returns the string representation

func (*GetRepositoryPolicyInput) Validate added in v1.1.22

func (s *GetRepositoryPolicyInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetRepositoryPolicyOutput

type GetRepositoryPolicyOutput struct {

	// The JSON repository policy text associated with the repository.
	PolicyText *string `locationName:"policyText" type:"string"`

	// The registry ID associated with the request.
	RegistryId *string `locationName:"registryId" type:"string"`

	// The repository name associated with the request.
	RepositoryName *string `locationName:"repositoryName" min:"2" type:"string"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/GetRepositoryPolicyResponse

func (GetRepositoryPolicyOutput) GoString

func (s GetRepositoryPolicyOutput) GoString() string

GoString returns the string representation

func (*GetRepositoryPolicyOutput) SetPolicyText added in v1.5.0

SetPolicyText sets the PolicyText field's value.

func (*GetRepositoryPolicyOutput) SetRegistryId added in v1.5.0

SetRegistryId sets the RegistryId field's value.

func (*GetRepositoryPolicyOutput) SetRepositoryName added in v1.5.0

SetRepositoryName sets the RepositoryName field's value.

func (GetRepositoryPolicyOutput) String

func (s GetRepositoryPolicyOutput) String() string

String returns the string representation

type Image

type Image struct {

	// An object containing the image tag and image digest associated with an image.
	ImageId *ImageIdentifier `locationName:"imageId" type:"structure"`

	// The image manifest associated with the image.
	ImageManifest *string `locationName:"imageManifest" type:"string"`

	// The AWS account ID associated with the registry containing the image.
	RegistryId *string `locationName:"registryId" type:"string"`

	// The name of the repository associated with the image.
	RepositoryName *string `locationName:"repositoryName" min:"2" type:"string"`
	// contains filtered or unexported fields
}

An object representing an Amazon ECR image. Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/Image

func (Image) GoString

func (s Image) GoString() string

GoString returns the string representation

func (*Image) SetImageId added in v1.5.0

func (s *Image) SetImageId(v *ImageIdentifier) *Image

SetImageId sets the ImageId field's value.

func (*Image) SetImageManifest added in v1.5.0

func (s *Image) SetImageManifest(v string) *Image

SetImageManifest sets the ImageManifest field's value.

func (*Image) SetRegistryId added in v1.5.0

func (s *Image) SetRegistryId(v string) *Image

SetRegistryId sets the RegistryId field's value.

func (*Image) SetRepositoryName added in v1.5.0

func (s *Image) SetRepositoryName(v string) *Image

SetRepositoryName sets the RepositoryName field's value.

func (Image) String

func (s Image) String() string

String returns the string representation

type ImageDetail added in v1.4.16

type ImageDetail struct {

	// The sha256 digest of the image manifest.
	ImageDigest *string `locationName:"imageDigest" type:"string"`

	// The date and time, expressed in standard JavaScript date format, at which
	// the current image was pushed to the repository.
	ImagePushedAt *time.Time `locationName:"imagePushedAt" type:"timestamp" timestampFormat:"unix"`

	// The size, in bytes, of the image in the repository.
	//
	// Beginning with Docker version 1.9, the Docker client compresses image layers
	// before pushing them to a V2 Docker registry. The output of the docker images
	// command shows the uncompressed image size, so it may return a larger image
	// size than the image sizes returned by DescribeImages.
	ImageSizeInBytes *int64 `locationName:"imageSizeInBytes" type:"long"`

	// The list of tags associated with this image.
	ImageTags []*string `locationName:"imageTags" type:"list"`

	// The AWS account ID associated with the registry to which this image belongs.
	RegistryId *string `locationName:"registryId" type:"string"`

	// The name of the repository to which this image belongs.
	RepositoryName *string `locationName:"repositoryName" min:"2" type:"string"`
	// contains filtered or unexported fields
}

An object that describes an image returned by a DescribeImages operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/ImageDetail

func (ImageDetail) GoString added in v1.4.16

func (s ImageDetail) GoString() string

GoString returns the string representation

func (*ImageDetail) SetImageDigest added in v1.5.0

func (s *ImageDetail) SetImageDigest(v string) *ImageDetail

SetImageDigest sets the ImageDigest field's value.

func (*ImageDetail) SetImagePushedAt added in v1.5.0

func (s *ImageDetail) SetImagePushedAt(v time.Time) *ImageDetail

SetImagePushedAt sets the ImagePushedAt field's value.

func (*ImageDetail) SetImageSizeInBytes added in v1.5.0

func (s *ImageDetail) SetImageSizeInBytes(v int64) *ImageDetail

SetImageSizeInBytes sets the ImageSizeInBytes field's value.

func (*ImageDetail) SetImageTags added in v1.5.0

func (s *ImageDetail) SetImageTags(v []*string) *ImageDetail

SetImageTags sets the ImageTags field's value.

func (*ImageDetail) SetRegistryId added in v1.5.0

func (s *ImageDetail) SetRegistryId(v string) *ImageDetail

SetRegistryId sets the RegistryId field's value.

func (*ImageDetail) SetRepositoryName added in v1.5.0

func (s *ImageDetail) SetRepositoryName(v string) *ImageDetail

SetRepositoryName sets the RepositoryName field's value.

func (ImageDetail) String added in v1.4.16

func (s ImageDetail) String() string

String returns the string representation

type ImageFailure

type ImageFailure struct {

	// The code associated with the failure.
	FailureCode *string `locationName:"failureCode" type:"string" enum:"ImageFailureCode"`

	// The reason for the failure.
	FailureReason *string `locationName:"failureReason" type:"string"`

	// The image ID associated with the failure.
	ImageId *ImageIdentifier `locationName:"imageId" type:"structure"`
	// contains filtered or unexported fields
}

An object representing an Amazon ECR image failure. Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/ImageFailure

func (ImageFailure) GoString

func (s ImageFailure) GoString() string

GoString returns the string representation

func (*ImageFailure) SetFailureCode added in v1.5.0

func (s *ImageFailure) SetFailureCode(v string) *ImageFailure

SetFailureCode sets the FailureCode field's value.

func (*ImageFailure) SetFailureReason added in v1.5.0

func (s *ImageFailure) SetFailureReason(v string) *ImageFailure

SetFailureReason sets the FailureReason field's value.

func (*ImageFailure) SetImageId added in v1.5.0

func (s *ImageFailure) SetImageId(v *ImageIdentifier) *ImageFailure

SetImageId sets the ImageId field's value.

func (ImageFailure) String

func (s ImageFailure) String() string

String returns the string representation

type ImageIdentifier

type ImageIdentifier struct {

	// The sha256 digest of the image manifest.
	ImageDigest *string `locationName:"imageDigest" type:"string"`

	// The tag used for the image.
	ImageTag *string `locationName:"imageTag" type:"string"`
	// contains filtered or unexported fields
}

An object with identifying information for an Amazon ECR image. Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/ImageIdentifier

func (ImageIdentifier) GoString

func (s ImageIdentifier) GoString() string

GoString returns the string representation

func (*ImageIdentifier) SetImageDigest added in v1.5.0

func (s *ImageIdentifier) SetImageDigest(v string) *ImageIdentifier

SetImageDigest sets the ImageDigest field's value.

func (*ImageIdentifier) SetImageTag added in v1.5.0

func (s *ImageIdentifier) SetImageTag(v string) *ImageIdentifier

SetImageTag sets the ImageTag field's value.

func (ImageIdentifier) String

func (s ImageIdentifier) String() string

String returns the string representation

type InitiateLayerUploadInput

type InitiateLayerUploadInput struct {

	// The AWS account ID associated with the registry that you intend to upload
	// layers to. If you do not specify a registry, the default registry is assumed.
	RegistryId *string `locationName:"registryId" type:"string"`

	// The name of the repository that you intend to upload layers to.
	//
	// RepositoryName is a required field
	RepositoryName *string `locationName:"repositoryName" min:"2" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/InitiateLayerUploadRequest

func (InitiateLayerUploadInput) GoString

func (s InitiateLayerUploadInput) GoString() string

GoString returns the string representation

func (*InitiateLayerUploadInput) SetRegistryId added in v1.5.0

SetRegistryId sets the RegistryId field's value.

func (*InitiateLayerUploadInput) SetRepositoryName added in v1.5.0

func (s *InitiateLayerUploadInput) SetRepositoryName(v string) *InitiateLayerUploadInput

SetRepositoryName sets the RepositoryName field's value.

func (InitiateLayerUploadInput) String

func (s InitiateLayerUploadInput) String() string

String returns the string representation

func (*InitiateLayerUploadInput) Validate added in v1.1.22

func (s *InitiateLayerUploadInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type InitiateLayerUploadOutput

type InitiateLayerUploadOutput struct {

	// The size, in bytes, that Amazon ECR expects future layer part uploads to
	// be.
	PartSize *int64 `locationName:"partSize" type:"long"`

	// The upload ID for the layer upload. This parameter is passed to further UploadLayerPart
	// and CompleteLayerUpload operations.
	UploadId *string `locationName:"uploadId" type:"string"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/InitiateLayerUploadResponse

func (InitiateLayerUploadOutput) GoString

func (s InitiateLayerUploadOutput) GoString() string

GoString returns the string representation

func (*InitiateLayerUploadOutput) SetPartSize added in v1.5.0

SetPartSize sets the PartSize field's value.

func (*InitiateLayerUploadOutput) SetUploadId added in v1.5.0

SetUploadId sets the UploadId field's value.

func (InitiateLayerUploadOutput) String

func (s InitiateLayerUploadOutput) String() string

String returns the string representation

type Layer

type Layer struct {

	// The availability status of the image layer.
	LayerAvailability *string `locationName:"layerAvailability" type:"string" enum:"LayerAvailability"`

	// The sha256 digest of the image layer.
	LayerDigest *string `locationName:"layerDigest" type:"string"`

	// The size, in bytes, of the image layer.
	LayerSize *int64 `locationName:"layerSize" type:"long"`

	// The media type of the layer, such as application/vnd.docker.image.rootfs.diff.tar.gzip
	// or application/vnd.oci.image.layer.v1.tar+gzip.
	MediaType *string `locationName:"mediaType" type:"string"`
	// contains filtered or unexported fields
}

An object representing an Amazon ECR image layer. Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/Layer

func (Layer) GoString

func (s Layer) GoString() string

GoString returns the string representation

func (*Layer) SetLayerAvailability added in v1.5.0

func (s *Layer) SetLayerAvailability(v string) *Layer

SetLayerAvailability sets the LayerAvailability field's value.

func (*Layer) SetLayerDigest added in v1.5.0

func (s *Layer) SetLayerDigest(v string) *Layer

SetLayerDigest sets the LayerDigest field's value.

func (*Layer) SetLayerSize added in v1.5.0

func (s *Layer) SetLayerSize(v int64) *Layer

SetLayerSize sets the LayerSize field's value.

func (*Layer) SetMediaType added in v1.6.8

func (s *Layer) SetMediaType(v string) *Layer

SetMediaType sets the MediaType field's value.

func (Layer) String

func (s Layer) String() string

String returns the string representation

type LayerFailure

type LayerFailure struct {

	// The failure code associated with the failure.
	FailureCode *string `locationName:"failureCode" type:"string" enum:"LayerFailureCode"`

	// The reason for the failure.
	FailureReason *string `locationName:"failureReason" type:"string"`

	// The layer digest associated with the failure.
	LayerDigest *string `locationName:"layerDigest" type:"string"`
	// contains filtered or unexported fields
}

An object representing an Amazon ECR image layer failure. Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/LayerFailure

func (LayerFailure) GoString

func (s LayerFailure) GoString() string

GoString returns the string representation

func (*LayerFailure) SetFailureCode added in v1.5.0

func (s *LayerFailure) SetFailureCode(v string) *LayerFailure

SetFailureCode sets the FailureCode field's value.

func (*LayerFailure) SetFailureReason added in v1.5.0

func (s *LayerFailure) SetFailureReason(v string) *LayerFailure

SetFailureReason sets the FailureReason field's value.

func (*LayerFailure) SetLayerDigest added in v1.5.0

func (s *LayerFailure) SetLayerDigest(v string) *LayerFailure

SetLayerDigest sets the LayerDigest field's value.

func (LayerFailure) String

func (s LayerFailure) String() string

String returns the string representation

type ListImagesFilter added in v1.4.2

type ListImagesFilter struct {

	// The tag status with which to filter your ListImages results. You can filter
	// results based on whether they are TAGGED or UNTAGGED.
	TagStatus *string `locationName:"tagStatus" type:"string" enum:"TagStatus"`
	// contains filtered or unexported fields
}

An object representing a filter on a ListImages operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/ListImagesFilter

func (ListImagesFilter) GoString added in v1.4.2

func (s ListImagesFilter) GoString() string

GoString returns the string representation

func (*ListImagesFilter) SetTagStatus added in v1.5.0

func (s *ListImagesFilter) SetTagStatus(v string) *ListImagesFilter

SetTagStatus sets the TagStatus field's value.

func (ListImagesFilter) String added in v1.4.2

func (s ListImagesFilter) String() string

String returns the string representation

type ListImagesInput

type ListImagesInput struct {

	// The filter key and value with which to filter your ListImages results.
	Filter *ListImagesFilter `locationName:"filter" type:"structure"`

	// The maximum number of image results returned by ListImages in paginated output.
	// When this parameter is used, ListImages only returns maxResults results in
	// a single page along with a nextToken response element. The remaining results
	// of the initial request can be seen by sending another ListImages request
	// with the returned nextToken value. This value can be between 1 and 100. If
	// this parameter is not used, then ListImages returns up to 100 results and
	// a nextToken value, if applicable.
	MaxResults *int64 `locationName:"maxResults" min:"1" type:"integer"`

	// The nextToken value returned from a previous paginated ListImages request
	// where maxResults was used and the results exceeded the value of that parameter.
	// Pagination continues from the end of the previous results that returned the
	// nextToken value. This value is null when there are no more results to return.
	//
	// This token should be treated as an opaque identifier that is only used to
	// retrieve the next items in a list and not for other programmatic purposes.
	NextToken *string `locationName:"nextToken" type:"string"`

	// The AWS account ID associated with the registry that contains the repository
	// to list images in. If you do not specify a registry, the default registry
	// is assumed.
	RegistryId *string `locationName:"registryId" type:"string"`

	// The repository whose image IDs are to be listed.
	//
	// RepositoryName is a required field
	RepositoryName *string `locationName:"repositoryName" min:"2" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/ListImagesRequest

func (ListImagesInput) GoString

func (s ListImagesInput) GoString() string

GoString returns the string representation

func (*ListImagesInput) SetFilter added in v1.5.0

SetFilter sets the Filter field's value.

func (*ListImagesInput) SetMaxResults added in v1.5.0

func (s *ListImagesInput) SetMaxResults(v int64) *ListImagesInput

SetMaxResults sets the MaxResults field's value.

func (*ListImagesInput) SetNextToken added in v1.5.0

func (s *ListImagesInput) SetNextToken(v string) *ListImagesInput

SetNextToken sets the NextToken field's value.

func (*ListImagesInput) SetRegistryId added in v1.5.0

func (s *ListImagesInput) SetRegistryId(v string) *ListImagesInput

SetRegistryId sets the RegistryId field's value.

func (*ListImagesInput) SetRepositoryName added in v1.5.0

func (s *ListImagesInput) SetRepositoryName(v string) *ListImagesInput

SetRepositoryName sets the RepositoryName field's value.

func (ListImagesInput) String

func (s ListImagesInput) String() string

String returns the string representation

func (*ListImagesInput) Validate added in v1.1.22

func (s *ListImagesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListImagesOutput

type ListImagesOutput struct {

	// The list of image IDs for the requested repository.
	ImageIds []*ImageIdentifier `locationName:"imageIds" min:"1" type:"list"`

	// The nextToken value to include in a future ListImages request. When the results
	// of a ListImages request exceed maxResults, this value can be used to retrieve
	// the next page of results. This value is null when there are no more results
	// to return.
	NextToken *string `locationName:"nextToken" type:"string"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/ListImagesResponse

func (ListImagesOutput) GoString

func (s ListImagesOutput) GoString() string

GoString returns the string representation

func (*ListImagesOutput) SetImageIds added in v1.5.0

func (s *ListImagesOutput) SetImageIds(v []*ImageIdentifier) *ListImagesOutput

SetImageIds sets the ImageIds field's value.

func (*ListImagesOutput) SetNextToken added in v1.5.0

func (s *ListImagesOutput) SetNextToken(v string) *ListImagesOutput

SetNextToken sets the NextToken field's value.

func (ListImagesOutput) String

func (s ListImagesOutput) String() string

String returns the string representation

type PutImageInput

type PutImageInput struct {

	// The image manifest corresponding to the image to be uploaded.
	//
	// ImageManifest is a required field
	ImageManifest *string `locationName:"imageManifest" type:"string" required:"true"`

	// The tag to associate with the image. This parameter is required for images
	// that use the Docker Image Manifest V2 Schema 2 or OCI formats.
	ImageTag *string `locationName:"imageTag" type:"string"`

	// The AWS account ID associated with the registry that contains the repository
	// in which to put the image. If you do not specify a registry, the default
	// registry is assumed.
	RegistryId *string `locationName:"registryId" type:"string"`

	// The name of the repository in which to put the image.
	//
	// RepositoryName is a required field
	RepositoryName *string `locationName:"repositoryName" min:"2" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/PutImageRequest

func (PutImageInput) GoString

func (s PutImageInput) GoString() string

GoString returns the string representation

func (*PutImageInput) SetImageManifest added in v1.5.0

func (s *PutImageInput) SetImageManifest(v string) *PutImageInput

SetImageManifest sets the ImageManifest field's value.

func (*PutImageInput) SetImageTag added in v1.6.8

func (s *PutImageInput) SetImageTag(v string) *PutImageInput

SetImageTag sets the ImageTag field's value.

func (*PutImageInput) SetRegistryId added in v1.5.0

func (s *PutImageInput) SetRegistryId(v string) *PutImageInput

SetRegistryId sets the RegistryId field's value.

func (*PutImageInput) SetRepositoryName added in v1.5.0

func (s *PutImageInput) SetRepositoryName(v string) *PutImageInput

SetRepositoryName sets the RepositoryName field's value.

func (PutImageInput) String

func (s PutImageInput) String() string

String returns the string representation

func (*PutImageInput) Validate added in v1.1.22

func (s *PutImageInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type PutImageOutput

type PutImageOutput struct {

	// Details of the image uploaded.
	Image *Image `locationName:"image" type:"structure"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/PutImageResponse

func (PutImageOutput) GoString

func (s PutImageOutput) GoString() string

GoString returns the string representation

func (*PutImageOutput) SetImage added in v1.5.0

func (s *PutImageOutput) SetImage(v *Image) *PutImageOutput

SetImage sets the Image field's value.

func (PutImageOutput) String

func (s PutImageOutput) String() string

String returns the string representation

type Repository

type Repository struct {

	// The date and time, in JavaScript date/time format, when the repository was
	// created.
	CreatedAt *time.Time `locationName:"createdAt" type:"timestamp" timestampFormat:"unix"`

	// The AWS account ID associated with the registry that contains the repository.
	RegistryId *string `locationName:"registryId" type:"string"`

	// The Amazon Resource Name (ARN) that identifies the repository. The ARN contains
	// the arn:aws:ecr namespace, followed by the region of the repository, the
	// AWS account ID of the repository owner, the repository namespace, and then
	// the repository name. For example, arn:aws:ecr:region:012345678910:repository/test.
	RepositoryArn *string `locationName:"repositoryArn" type:"string"`

	// The name of the repository.
	RepositoryName *string `locationName:"repositoryName" min:"2" type:"string"`

	// The URI for the repository. You can use this URI for Docker push and pull
	// operations.
	RepositoryUri *string `locationName:"repositoryUri" type:"string"`
	// contains filtered or unexported fields
}

An object representing a repository. Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/Repository

func (Repository) GoString

func (s Repository) GoString() string

GoString returns the string representation

func (*Repository) SetCreatedAt added in v1.5.0

func (s *Repository) SetCreatedAt(v time.Time) *Repository

SetCreatedAt sets the CreatedAt field's value.

func (*Repository) SetRegistryId added in v1.5.0

func (s *Repository) SetRegistryId(v string) *Repository

SetRegistryId sets the RegistryId field's value.

func (*Repository) SetRepositoryArn added in v1.5.0

func (s *Repository) SetRepositoryArn(v string) *Repository

SetRepositoryArn sets the RepositoryArn field's value.

func (*Repository) SetRepositoryName added in v1.5.0

func (s *Repository) SetRepositoryName(v string) *Repository

SetRepositoryName sets the RepositoryName field's value.

func (*Repository) SetRepositoryUri added in v1.5.0

func (s *Repository) SetRepositoryUri(v string) *Repository

SetRepositoryUri sets the RepositoryUri field's value.

func (Repository) String

func (s Repository) String() string

String returns the string representation

type SetRepositoryPolicyInput

type SetRepositoryPolicyInput struct {

	// If the policy you are attempting to set on a repository policy would prevent
	// you from setting another policy in the future, you must force the SetRepositoryPolicy
	// operation. This is intended to prevent accidental repository lock outs.
	Force *bool `locationName:"force" type:"boolean"`

	// The JSON repository policy text to apply to the repository.
	//
	// PolicyText is a required field
	PolicyText *string `locationName:"policyText" type:"string" required:"true"`

	// The AWS account ID associated with the registry that contains the repository.
	// If you do not specify a registry, the default registry is assumed.
	RegistryId *string `locationName:"registryId" type:"string"`

	// The name of the repository to receive the policy.
	//
	// RepositoryName is a required field
	RepositoryName *string `locationName:"repositoryName" min:"2" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/SetRepositoryPolicyRequest

func (SetRepositoryPolicyInput) GoString

func (s SetRepositoryPolicyInput) GoString() string

GoString returns the string representation

func (*SetRepositoryPolicyInput) SetForce added in v1.5.0

SetForce sets the Force field's value.

func (*SetRepositoryPolicyInput) SetPolicyText added in v1.5.0

SetPolicyText sets the PolicyText field's value.

func (*SetRepositoryPolicyInput) SetRegistryId added in v1.5.0

SetRegistryId sets the RegistryId field's value.

func (*SetRepositoryPolicyInput) SetRepositoryName added in v1.5.0

func (s *SetRepositoryPolicyInput) SetRepositoryName(v string) *SetRepositoryPolicyInput

SetRepositoryName sets the RepositoryName field's value.

func (SetRepositoryPolicyInput) String

func (s SetRepositoryPolicyInput) String() string

String returns the string representation

func (*SetRepositoryPolicyInput) Validate added in v1.1.22

func (s *SetRepositoryPolicyInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type SetRepositoryPolicyOutput

type SetRepositoryPolicyOutput struct {

	// The JSON repository policy text applied to the repository.
	PolicyText *string `locationName:"policyText" type:"string"`

	// The registry ID associated with the request.
	RegistryId *string `locationName:"registryId" type:"string"`

	// The repository name associated with the request.
	RepositoryName *string `locationName:"repositoryName" min:"2" type:"string"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/SetRepositoryPolicyResponse

func (SetRepositoryPolicyOutput) GoString

func (s SetRepositoryPolicyOutput) GoString() string

GoString returns the string representation

func (*SetRepositoryPolicyOutput) SetPolicyText added in v1.5.0

SetPolicyText sets the PolicyText field's value.

func (*SetRepositoryPolicyOutput) SetRegistryId added in v1.5.0

SetRegistryId sets the RegistryId field's value.

func (*SetRepositoryPolicyOutput) SetRepositoryName added in v1.5.0

SetRepositoryName sets the RepositoryName field's value.

func (SetRepositoryPolicyOutput) String

func (s SetRepositoryPolicyOutput) String() string

String returns the string representation

type UploadLayerPartInput

type UploadLayerPartInput struct {

	// The base64-encoded layer part payload.
	//
	// LayerPartBlob is automatically base64 encoded/decoded by the SDK.
	//
	// LayerPartBlob is a required field
	LayerPartBlob []byte `locationName:"layerPartBlob" type:"blob" required:"true"`

	// The integer value of the first byte of the layer part.
	//
	// PartFirstByte is a required field
	PartFirstByte *int64 `locationName:"partFirstByte" type:"long" required:"true"`

	// The integer value of the last byte of the layer part.
	//
	// PartLastByte is a required field
	PartLastByte *int64 `locationName:"partLastByte" type:"long" required:"true"`

	// The AWS account ID associated with the registry that you are uploading layer
	// parts to. If you do not specify a registry, the default registry is assumed.
	RegistryId *string `locationName:"registryId" type:"string"`

	// The name of the repository that you are uploading layer parts to.
	//
	// RepositoryName is a required field
	RepositoryName *string `locationName:"repositoryName" min:"2" type:"string" required:"true"`

	// The upload ID from a previous InitiateLayerUpload operation to associate
	// with the layer part upload.
	//
	// UploadId is a required field
	UploadId *string `locationName:"uploadId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/UploadLayerPartRequest

func (UploadLayerPartInput) GoString

func (s UploadLayerPartInput) GoString() string

GoString returns the string representation

func (*UploadLayerPartInput) SetLayerPartBlob added in v1.5.0

func (s *UploadLayerPartInput) SetLayerPartBlob(v []byte) *UploadLayerPartInput

SetLayerPartBlob sets the LayerPartBlob field's value.

func (*UploadLayerPartInput) SetPartFirstByte added in v1.5.0

func (s *UploadLayerPartInput) SetPartFirstByte(v int64) *UploadLayerPartInput

SetPartFirstByte sets the PartFirstByte field's value.

func (*UploadLayerPartInput) SetPartLastByte added in v1.5.0

func (s *UploadLayerPartInput) SetPartLastByte(v int64) *UploadLayerPartInput

SetPartLastByte sets the PartLastByte field's value.

func (*UploadLayerPartInput) SetRegistryId added in v1.5.0

func (s *UploadLayerPartInput) SetRegistryId(v string) *UploadLayerPartInput

SetRegistryId sets the RegistryId field's value.

func (*UploadLayerPartInput) SetRepositoryName added in v1.5.0

func (s *UploadLayerPartInput) SetRepositoryName(v string) *UploadLayerPartInput

SetRepositoryName sets the RepositoryName field's value.

func (*UploadLayerPartInput) SetUploadId added in v1.5.0

SetUploadId sets the UploadId field's value.

func (UploadLayerPartInput) String

func (s UploadLayerPartInput) String() string

String returns the string representation

func (*UploadLayerPartInput) Validate added in v1.1.22

func (s *UploadLayerPartInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type UploadLayerPartOutput

type UploadLayerPartOutput struct {

	// The integer value of the last byte received in the request.
	LastByteReceived *int64 `locationName:"lastByteReceived" type:"long"`

	// The registry ID associated with the request.
	RegistryId *string `locationName:"registryId" type:"string"`

	// The repository name associated with the request.
	RepositoryName *string `locationName:"repositoryName" min:"2" type:"string"`

	// The upload ID associated with the request.
	UploadId *string `locationName:"uploadId" type:"string"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecr-2015-09-21/UploadLayerPartResponse

func (UploadLayerPartOutput) GoString

func (s UploadLayerPartOutput) GoString() string

GoString returns the string representation

func (*UploadLayerPartOutput) SetLastByteReceived added in v1.5.0

func (s *UploadLayerPartOutput) SetLastByteReceived(v int64) *UploadLayerPartOutput

SetLastByteReceived sets the LastByteReceived field's value.

func (*UploadLayerPartOutput) SetRegistryId added in v1.5.0

func (s *UploadLayerPartOutput) SetRegistryId(v string) *UploadLayerPartOutput

SetRegistryId sets the RegistryId field's value.

func (*UploadLayerPartOutput) SetRepositoryName added in v1.5.0

func (s *UploadLayerPartOutput) SetRepositoryName(v string) *UploadLayerPartOutput

SetRepositoryName sets the RepositoryName field's value.

func (*UploadLayerPartOutput) SetUploadId added in v1.5.0

SetUploadId sets the UploadId field's value.

func (UploadLayerPartOutput) String

func (s UploadLayerPartOutput) String() string

String returns the string representation

Directories

Path Synopsis
Package ecriface provides an interface to enable mocking the Amazon EC2 Container Registry service client for testing your code.
Package ecriface provides an interface to enable mocking the Amazon EC2 Container Registry service client for testing your code.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL