devices

package
v3.4.0+incompatible Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Dec 21, 2018 License: Apache-2.0 Imports: 0 Imported by: 0

Documentation

Overview

Package devices is a container for device drivers.

Subpackages contain the concrete implementations. Devices accept port interface, constructors return concrete type.

Directories

Path Synopsis
Package apa102 drives a strip of APA102 LEDs connected on a SPI port.
Package apa102 drives a strip of APA102 LEDs connected on a SPI port.
Package bmxx80 controls a Bosch BMP180/BME280/BMP280 device over I²C, or SPI for the BMx280.
Package bmxx80 controls a Bosch BMP180/BME280/BMP280 device over I²C, or SPI for the BMx280.
bmx280smoketest
Package bmx280smoketest is leveraged by periph-smoketest to verify that two BME280/BMP280, one over I²C, one over SPI, read roughly the same temperature, humidity and pressure.
Package bmx280smoketest is leveraged by periph-smoketest to verify that two BME280/BMP280, one over I²C, one over SPI, read roughly the same temperature, humidity and pressure.
Package cap1xxx controls a Microchip cap1105/cap1106/cap1114/cap1133/cap1126/cap1128/cap1166/cap1188 device over I²C. The cap1xxx devices are a 3/5/6/8/14 channel capacitive touch sensor with 2/3/6/8/11 LED drivers.
Package cap1xxx controls a Microchip cap1105/cap1106/cap1114/cap1133/cap1126/cap1128/cap1166/cap1188 device over I²C. The cap1xxx devices are a 3/5/6/8/14 channel capacitive touch sensor with 2/3/6/8/11 LED drivers.
Package ds18b20 interfaces to Dallas Semi / Maxim DS18B20 and MAX31820 1-wire temperature sensors.
Package ds18b20 interfaces to Dallas Semi / Maxim DS18B20 and MAX31820 1-wire temperature sensors.
Package ds248x controls a Maxim DS2483 or DS2482-100 1-wire interface chip over I²C. More details See https://periph.io/device/ds248x/ for more details about the device.
Package ds248x controls a Maxim DS2483 or DS2482-100 1-wire interface chip over I²C. More details See https://periph.io/device/ds248x/ for more details about the device.
Package lepton drives a FLIR Lepton Infra Red (IR) camera.
Package lepton drives a FLIR Lepton Infra Red (IR) camera.
cci
Package cci declares the Camera Command Interface to interact with a FLIR Lepton over I²C. This protocol controls and queries the camera but is not used to read the images.
Package cci declares the Camera Command Interface to interact with a FLIR Lepton over I²C. This protocol controls and queries the camera but is not used to read the images.
image14bit
Package image14bit implements 14-bit per pixel images.
Package image14bit implements 14-bit per pixel images.
Package lirc implements InfraRed receiver support through native linux app lirc.
Package lirc implements InfraRed receiver support through native linux app lirc.
Package ssd1306 controls a 128x64 monochrome OLED display via a SSD1306 controller.
Package ssd1306 controls a 128x64 monochrome OLED display via a SSD1306 controller.
image1bit
Package image1bit implements black and white (1 bit per pixel) 2D graphics.
Package image1bit implements black and white (1 bit per pixel) 2D graphics.
ssd1306smoketest
Package ssd1306smoketest is leveraged by periph-smoketest to verify that two SSD1306, one over I²C, one over SPI, can display the same output.
Package ssd1306smoketest is leveraged by periph-smoketest to verify that two SSD1306, one over I²C, one over SPI, can display the same output.
Package tm1637 controls a TM1637 device over GPIO pins.
Package tm1637 controls a TM1637 device over GPIO pins.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL