opsworks

type AgentVersion struct {

	// The configuration manager.
	ConfigurationManager *StackConfigurationManager `type:"structure"`

	// The agent version.
	Version *string `type:"string"`
	// contains filtered or unexported fields
}

type App struct {

	// The app ID.
	AppId *string `type:"string"`

	// A Source object that describes the app repository.
	AppSource *Source `type:"structure"`

	// The stack attributes.
	Attributes map[string]*string `type:"map"`

	// When the app was created.
	CreatedAt *string `type:"string"`

	// The app's data sources.
	DataSources []*DataSource `type:"list"`

	// A description of the app.
	Description *string `type:"string"`

	// The app vhost settings with multiple domains separated by commas. For example:
	// 'www.example.com, example.com'
	Domains []*string `type:"list"`

	// Whether to enable SSL for the app.
	EnableSsl *bool `type:"boolean"`

	// An array of EnvironmentVariable objects that specify environment variables
	// to be associated with the app. After you deploy the app, these variables
	// are defined on the associated app server instances. For more information,
	// see  Environment Variables (http://docs.aws.amazon.com/opsworks/latest/userguide/workingapps-creating.html#workingapps-creating-environment).
	//
	// There is no specific limit on the number of environment variables. However,
	// the size of the associated data structure - which includes the variable names,
	// values, and protected flag values - cannot exceed 10 KB (10240 Bytes). This
	// limit should accommodate most if not all use cases, but if you do exceed
	// it, you will cause an exception (API) with an "Environment: is too large
	// (maximum is 10KB)" message.
	Environment []*EnvironmentVariable `type:"list"`

	// The app name.
	Name *string `type:"string"`

	// The app's short name.
	Shortname *string `type:"string"`

	// An SslConfiguration object with the SSL configuration.
	SslConfiguration *SslConfiguration `type:"structure"`

	// The app stack ID.
	StackId *string `type:"string"`

	// The app type.
	Type *string `type:"string" enum:"AppType"`
	// contains filtered or unexported fields
}

type AssignInstanceInput struct {

	// The instance ID.
	//
	// InstanceId is a required field
	InstanceId *string `type:"string" required:"true"`

	// The layer ID, which must correspond to a custom layer. You cannot assign
	// a registered instance to a built-in layer.
	//
	// LayerIds is a required field
	LayerIds []*string `type:"list" required:"true"`
	// contains filtered or unexported fields
}

type AssignInstanceOutput struct {
	// contains filtered or unexported fields
}

type AssignVolumeInput struct {

	// The instance ID.
	InstanceId *string `type:"string"`

	// The volume ID.
	//
	// VolumeId is a required field
	VolumeId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

type AssignVolumeOutput struct {
	// contains filtered or unexported fields
}

type AssociateElasticIpInput struct {

	// The Elastic IP address.
	//
	// ElasticIp is a required field
	ElasticIp *string `type:"string" required:"true"`

	// The instance ID.
	InstanceId *string `type:"string"`
	// contains filtered or unexported fields
}

type AssociateElasticIpOutput struct {
	// contains filtered or unexported fields
}

type AttachElasticLoadBalancerInput struct {

	// The Elastic Load Balancing instance's name.
	//
	// ElasticLoadBalancerName is a required field
	ElasticLoadBalancerName *string `type:"string" required:"true"`

	// The ID of the layer that the Elastic Load Balancing instance is to be attached
	// to.
	//
	// LayerId is a required field
	LayerId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

type AttachElasticLoadBalancerOutput struct {
	// contains filtered or unexported fields
}

type AutoScalingThresholds struct {

	// Custom Cloudwatch auto scaling alarms, to be used as thresholds. This parameter
	// takes a list of up to five alarm names, which are case sensitive and must
	// be in the same region as the stack.
	//
	// To use custom alarms, you must update your service role to allow cloudwatch:DescribeAlarms.
	// You can either have AWS OpsWorks update the role for you when you first use
	// this feature or you can edit the role manually. For more information, see
	// Allowing AWS OpsWorks to Act on Your Behalf (http://docs.aws.amazon.com/opsworks/latest/userguide/opsworks-security-servicerole.html).
	Alarms []*string `type:"list"`

	// The CPU utilization threshold, as a percent of the available CPU. A value
	// of -1 disables the threshold.
	CpuThreshold *float64 `type:"double"`

	// The amount of time (in minutes) after a scaling event occurs that AWS OpsWorks
	// should ignore metrics and suppress additional scaling events. For example,
	// AWS OpsWorks adds new instances following an upscaling event but the instances
	// won't start reducing the load until they have been booted and configured.
	// There is no point in raising additional scaling events during that operation,
	// which typically takes several minutes. IgnoreMetricsTime allows you to direct
	// AWS OpsWorks to suppress scaling events long enough to get the new instances
	// online.
	IgnoreMetricsTime *int64 `min:"1" type:"integer"`

	// The number of instances to add or remove when the load exceeds a threshold.
	InstanceCount *int64 `type:"integer"`

	// The load threshold. A value of -1 disables the threshold. For more information
	// about how load is computed, see Load (computing) (http://en.wikipedia.org/wiki/Load_%28computing%29).
	LoadThreshold *float64 `type:"double"`

	// The memory utilization threshold, as a percent of the available memory. A
	// value of -1 disables the threshold.
	MemoryThreshold *float64 `type:"double"`

	// The amount of time, in minutes, that the load must exceed a threshold before
	// more instances are added or removed.
	ThresholdsWaitTime *int64 `min:"1" type:"integer"`
	// contains filtered or unexported fields
}

type BlockDeviceMapping struct {

	// The device name that is exposed to the instance, such as /dev/sdh. For the
	// root device, you can use the explicit device name or you can set this parameter
	// to ROOT_DEVICE and AWS OpsWorks will provide the correct device name.
	DeviceName *string `type:"string"`

	// An EBSBlockDevice that defines how to configure an Amazon EBS volume when
	// the instance is launched.
	Ebs *EbsBlockDevice `type:"structure"`

	// Suppresses the specified device included in the AMI's block device mapping.
	NoDevice *string `type:"string"`

	// The virtual device name. For more information, see BlockDeviceMapping (http://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_BlockDeviceMapping.html).
	VirtualName *string `type:"string"`
	// contains filtered or unexported fields
}

type ChefConfiguration struct {

	// The Berkshelf version.
	BerkshelfVersion *string `type:"string"`

	// Whether to enable Berkshelf.
	ManageBerkshelf *bool `type:"boolean"`
	// contains filtered or unexported fields
}

type CloneStackInput struct {

	// The default AWS OpsWorks agent version. You have the following options:
	//
	//    * Auto-update - Set this parameter to LATEST. AWS OpsWorks automatically
	//    installs new agent versions on the stack's instances as soon as they are
	//    available.
	//
	//    * Fixed version - Set this parameter to your preferred agent version.
	//    To update the agent version, you must edit the stack configuration and
	//    specify a new version. AWS OpsWorks then automatically installs that version
	//    on the stack's instances.
	//
	// The default setting is LATEST. To specify an agent version, you must use
	// the complete version number, not the abbreviated number shown on the console.
	// For a list of available agent version numbers, call DescribeAgentVersions.
	//
	// You can also specify an agent version when you create or update an instance,
	// which overrides the stack's default setting.
	AgentVersion *string `type:"string"`

	// A list of stack attributes and values as key/value pairs to be added to the
	// cloned stack.
	Attributes map[string]*string `type:"map"`

	// A ChefConfiguration object that specifies whether to enable Berkshelf and
	// the Berkshelf version on Chef 11.10 stacks. For more information, see Create
	// a New Stack (http://docs.aws.amazon.com/opsworks/latest/userguide/workingstacks-creating.html).
	ChefConfiguration *ChefConfiguration `type:"structure"`

	// A list of source stack app IDs to be included in the cloned stack.
	CloneAppIds []*string `type:"list"`

	// Whether to clone the source stack's permissions.
	ClonePermissions *bool `type:"boolean"`

	// The configuration manager. When you clone a stack we recommend that you use
	// the configuration manager to specify the Chef version: 12, 11.10, or 11.4
	// for Linux stacks, or 12.2 for Windows stacks. The default value for Linux
	// stacks is currently 12.
	ConfigurationManager *StackConfigurationManager `type:"structure"`

	// Contains the information required to retrieve an app or cookbook from a repository.
	// For more information, see Creating Apps (http://docs.aws.amazon.com/opsworks/latest/userguide/workingapps-creating.html)
	// or Custom Recipes and Cookbooks (http://docs.aws.amazon.com/opsworks/latest/userguide/workingcookbook.html).
	CustomCookbooksSource *Source `type:"structure"`

	// A string that contains user-defined, custom JSON. It is used to override
	// the corresponding default stack configuration JSON values. The string should
	// be in the following format:
	//
	// "{\"key1\": \"value1\", \"key2\": \"value2\",...}"
	//
	// For more information on custom JSON, see Use Custom JSON to Modify the Stack
	// Configuration Attributes (http://docs.aws.amazon.com/opsworks/latest/userguide/workingstacks-json.html)
	CustomJson *string `type:"string"`

	// The cloned stack's default Availability Zone, which must be in the specified
	// region. For more information, see Regions and Endpoints (http://docs.aws.amazon.com/general/latest/gr/rande.html).
	// If you also specify a value for DefaultSubnetId, the subnet must be in the
	// same zone. For more information, see the VpcId parameter description.
	DefaultAvailabilityZone *string `type:"string"`

	// The Amazon Resource Name (ARN) of an IAM profile that is the default profile
	// for all of the stack's EC2 instances. For more information about IAM ARNs,
	// see Using Identifiers (http://docs.aws.amazon.com/IAM/latest/UserGuide/Using_Identifiers.html).
	DefaultInstanceProfileArn *string `type:"string"`

	// The stack's operating system, which must be set to one of the following.
	//
	//    * A supported Linux operating system: An Amazon Linux version, such as
	//    Amazon Linux 2016.03, Amazon Linux 2015.09, or Amazon Linux 2015.03.
	//
	//    * A supported Ubuntu operating system, such as Ubuntu 16.04 LTS, Ubuntu
	//    14.04 LTS, or Ubuntu 12.04 LTS.
	//
	//    * CentOS 7
	//
	//    * Red Hat Enterprise Linux 7
	//
	//    * Microsoft Windows Server 2012 R2 Base, Microsoft Windows Server 2012
	//    R2 with SQL Server Express, Microsoft Windows Server 2012 R2 with SQL
	//    Server Standard, or Microsoft Windows Server 2012 R2 with SQL Server Web.
	//
	//    * A custom AMI: Custom. You specify the custom AMI you want to use when
	//    you create instances. For more information on how to use custom AMIs with
	//    OpsWorks, see Using Custom AMIs (http://docs.aws.amazon.com/opsworks/latest/userguide/workinginstances-custom-ami.html).
	//
	// The default option is the parent stack's operating system. For more information
	// on the supported operating systems, see AWS OpsWorks Operating Systems (http://docs.aws.amazon.com/opsworks/latest/userguide/workinginstances-os.html).
	//
	// You can specify a different Linux operating system for the cloned stack,
	// but you cannot change from Linux to Windows or Windows to Linux.
	DefaultOs *string `type:"string"`

	// The default root device type. This value is used by default for all instances
	// in the cloned stack, but you can override it when you create an instance.
	// For more information, see Storage for the Root Device (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ComponentsAMIs.html#storage-for-the-root-device).
	DefaultRootDeviceType *string `type:"string" enum:"RootDeviceType"`

	// A default Amazon EC2 key pair name. The default value is none. If you specify
	// a key pair name, AWS OpsWorks installs the public key on the instance and
	// you can use the private key with an SSH client to log in to the instance.
	// For more information, see  Using SSH to Communicate with an Instance (http://docs.aws.amazon.com/opsworks/latest/userguide/workinginstances-ssh.html)
	// and  Managing SSH Access (http://docs.aws.amazon.com/opsworks/latest/userguide/security-ssh-access.html).
	// You can override this setting by specifying a different key pair, or no key
	// pair, when you  create an instance (http://docs.aws.amazon.com/opsworks/latest/userguide/workinginstances-add.html).
	DefaultSshKeyName *string `type:"string"`

	// The stack's default VPC subnet ID. This parameter is required if you specify
	// a value for the VpcId parameter. All instances are launched into this subnet
	// unless you specify otherwise when you create the instance. If you also specify
	// a value for DefaultAvailabilityZone, the subnet must be in that zone. For
	// information on default values and when this parameter is required, see the
	// VpcId parameter description.
	DefaultSubnetId *string `type:"string"`

	// The stack's host name theme, with spaces are replaced by underscores. The
	// theme is used to generate host names for the stack's instances. By default,
	// HostnameTheme is set to Layer_Dependent, which creates host names by appending
	// integers to the layer's short name. The other themes are:
	//
	//    * Baked_Goods
	//
	//    * Clouds
	//
	//    * Europe_Cities
	//
	//    * Fruits
	//
	//    * Greek_Deities
	//
	//    * Legendary_creatures_from_Japan
	//
	//    * Planets_and_Moons
	//
	//    * Roman_Deities
	//
	//    * Scottish_Islands
	//
	//    * US_Cities
	//
	//    * Wild_Cats
	//
	// To obtain a generated host name, call GetHostNameSuggestion, which returns
	// a host name based on the current theme.
	HostnameTheme *string `type:"string"`

	// The cloned stack name.
	Name *string `type:"string"`

	// The cloned stack AWS region, such as "ap-northeast-2". For more information
	// about AWS regions, see Regions and Endpoints (http://docs.aws.amazon.com/general/latest/gr/rande.html).
	Region *string `type:"string"`

	// The stack AWS Identity and Access Management (IAM) role, which allows AWS
	// OpsWorks to work with AWS resources on your behalf. You must set this parameter
	// to the Amazon Resource Name (ARN) for an existing IAM role. If you create
	// a stack by using the AWS OpsWorks console, it creates the role for you. You
	// can obtain an existing stack's IAM ARN programmatically by calling DescribePermissions.
	// For more information about IAM ARNs, see Using Identifiers (http://docs.aws.amazon.com/IAM/latest/UserGuide/Using_Identifiers.html).
	//
	// You must set this parameter to a valid service role ARN or the action will
	// fail; there is no default value. You can specify the source stack's service
	// role ARN, if you prefer, but you must do so explicitly.
	//
	// ServiceRoleArn is a required field
	ServiceRoleArn *string `type:"string" required:"true"`

	// The source stack ID.
	//
	// SourceStackId is a required field
	SourceStackId *string `type:"string" required:"true"`

	// Whether to use custom cookbooks.
	UseCustomCookbooks *bool `type:"boolean"`

	// Whether to associate the AWS OpsWorks built-in security groups with the stack's
	// layers.
	//
	// AWS OpsWorks provides a standard set of built-in security groups, one for
	// each layer, which are associated with layers by default. With UseOpsworksSecurityGroups
	// you can instead provide your own custom security groups. UseOpsworksSecurityGroups
	// has the following settings:
	//
	//    * True - AWS OpsWorks automatically associates the appropriate built-in
	//    security group with each layer (default setting). You can associate additional
	//    security groups with a layer after you create it but you cannot delete
	//    the built-in security group.
	//
	//    * False - AWS OpsWorks does not associate built-in security groups with
	//    layers. You must create appropriate Amazon Elastic Compute Cloud (Amazon
	//    EC2) security groups and associate a security group with each layer that
	//    you create. However, you can still manually associate a built-in security
	//    group with a layer on creation; custom security groups are required only
	//    for those layers that need custom settings.
	//
	// For more information, see Create a New Stack (http://docs.aws.amazon.com/opsworks/latest/userguide/workingstacks-creating.html).
	UseOpsworksSecurityGroups *bool `type:"boolean"`

	// The ID of the VPC that the cloned stack is to be launched into. It must be
	// in the specified region. All instances are launched into this VPC, and you
	// cannot change the ID later.
	//
	//    * If your account supports EC2 Classic, the default value is no VPC.
	//
	//    * If your account does not support EC2 Classic, the default value is the
	//    default VPC for the specified region.
	//
	// If the VPC ID corresponds to a default VPC and you have specified either
	// the DefaultAvailabilityZone or the DefaultSubnetId parameter only, AWS OpsWorks
	// infers the value of the other parameter. If you specify neither parameter,
	// AWS OpsWorks sets these parameters to the first valid Availability Zone for
	// the specified region and the corresponding default VPC subnet ID, respectively.
	//
	// If you specify a nondefault VPC ID, note the following:
	//
	//    * It must belong to a VPC in your account that is in the specified region.
	//
	//    * You must specify a value for DefaultSubnetId.
	//
	// For more information on how to use AWS OpsWorks with a VPC, see Running a
	// Stack in a VPC (http://docs.aws.amazon.com/opsworks/latest/userguide/workingstacks-vpc.html).
	// For more information on default VPC and EC2 Classic, see Supported Platforms
	// (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-supported-platforms.html).
	VpcId *string `type:"string"`
	// contains filtered or unexported fields
}

type CloneStackOutput struct {

	// The cloned stack ID.
	StackId *string `type:"string"`
	// contains filtered or unexported fields
}

type Command struct {

	// Date and time when the command was acknowledged.
	AcknowledgedAt *string `type:"string"`

	// The command ID.
	CommandId *string `type:"string"`

	// Date when the command completed.
	CompletedAt *string `type:"string"`

	// Date and time when the command was run.
	CreatedAt *string `type:"string"`

	// The command deployment ID.
	DeploymentId *string `type:"string"`

	// The command exit code.
	ExitCode *int64 `type:"integer"`

	// The ID of the instance where the command was executed.
	InstanceId *string `type:"string"`

	// The URL of the command log.
	LogUrl *string `type:"string"`

	// The command status:
	//
	//    * failed
	//
	//    * successful
	//
	//    * skipped
	//
	//    * pending
	Status *string `type:"string"`

	// The command type:
	//
	//    * deploy
	//
	//    * rollback
	//
	//    * start
	//
	//    * stop
	//
	//    * restart
	//
	//    * undeploy
	//
	//    * update_dependencies
	//
	//    * install_dependencies
	//
	//    * update_custom_cookbooks
	//
	//    * execute_recipes
	Type *string `type:"string"`
	// contains filtered or unexported fields
}

type CreateAppInput struct {

	// A Source object that specifies the app repository.
	AppSource *Source `type:"structure"`

	// One or more user-defined key/value pairs to be added to the stack attributes.
	Attributes map[string]*string `type:"map"`

	// The app's data source.
	DataSources []*DataSource `type:"list"`

	// A description of the app.
	Description *string `type:"string"`

	// The app virtual host settings, with multiple domains separated by commas.
	// For example: 'www.example.com, example.com'
	Domains []*string `type:"list"`

	// Whether to enable SSL for the app.
	EnableSsl *bool `type:"boolean"`

	// An array of EnvironmentVariable objects that specify environment variables
	// to be associated with the app. After you deploy the app, these variables
	// are defined on the associated app server instance. For more information,
	// see  Environment Variables (http://docs.aws.amazon.com/opsworks/latest/userguide/workingapps-creating.html#workingapps-creating-environment).
	//
	// There is no specific limit on the number of environment variables. However,
	// the size of the associated data structure - which includes the variables'
	// names, values, and protected flag values - cannot exceed 10 KB (10240 Bytes).
	// This limit should accommodate most if not all use cases. Exceeding it will
	// cause an exception with the message, "Environment: is too large (maximum
	// is 10KB)."
	//
	// This parameter is supported only by Chef 11.10 stacks. If you have specified
	// one or more environment variables, you cannot modify the stack's Chef version.
	Environment []*EnvironmentVariable `type:"list"`

	// The app name.
	//
	// Name is a required field
	Name *string `type:"string" required:"true"`

	// The app's short name.
	Shortname *string `type:"string"`

	// An SslConfiguration object with the SSL configuration.
	SslConfiguration *SslConfiguration `type:"structure"`

	// The stack ID.
	//
	// StackId is a required field
	StackId *string `type:"string" required:"true"`

	// The app type. Each supported type is associated with a particular layer.
	// For example, PHP applications are associated with a PHP layer. AWS OpsWorks
	// deploys an application to those instances that are members of the corresponding
	// layer. If your app isn't one of the standard types, or you prefer to implement
	// your own Deploy recipes, specify other.
	//
	// Type is a required field
	Type *string `type:"string" required:"true" enum:"AppType"`
	// contains filtered or unexported fields
}

type CreateAppOutput struct {

	// The app ID.
	AppId *string `type:"string"`
	// contains filtered or unexported fields
}

type CreateDeploymentInput struct {

	// The app ID. This parameter is required for app deployments, but not for other
	// deployment commands.
	AppId *string `type:"string"`

	// A DeploymentCommand object that specifies the deployment command and any
	// associated arguments.
	//
	// Command is a required field
	Command *DeploymentCommand `type:"structure" required:"true"`

	// A user-defined comment.
	Comment *string `type:"string"`

	// A string that contains user-defined, custom JSON. It is used to override
	// the corresponding default stack configuration JSON values. The string should
	// be in the following format:
	//
	// "{\"key1\": \"value1\", \"key2\": \"value2\",...}"
	//
	// For more information on custom JSON, see Use Custom JSON to Modify the Stack
	// Configuration Attributes (http://docs.aws.amazon.com/opsworks/latest/userguide/workingstacks-json.html).
	CustomJson *string `type:"string"`

	// The instance IDs for the deployment targets.
	InstanceIds []*string `type:"list"`

	// The layer IDs for the deployment targets.
	LayerIds []*string `type:"list"`

	// The stack ID.
	//
	// StackId is a required field
	StackId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

type CreateDeploymentOutput struct {

	// The deployment ID, which can be used with other requests to identify the
	// deployment.
	DeploymentId *string `type:"string"`
	// contains filtered or unexported fields
}

type CreateInstanceInput struct {

	// The default AWS OpsWorks agent version. You have the following options:
	//
	//    * INHERIT - Use the stack's default agent version setting.
	//
	//    * version_number - Use the specified agent version. This value overrides
	//    the stack's default setting. To update the agent version, edit the instance
	//    configuration and specify a new version. AWS OpsWorks then automatically
	//    installs that version on the instance.
	//
	// The default setting is INHERIT. To specify an agent version, you must use
	// the complete version number, not the abbreviated number shown on the console.
	// For a list of available agent version numbers, call DescribeAgentVersions.
	AgentVersion *string `type:"string"`

	// A custom AMI ID to be used to create the instance. The AMI should be based
	// on one of the supported operating systems. For more information, see Using
	// Custom AMIs (http://docs.aws.amazon.com/opsworks/latest/userguide/workinginstances-custom-ami.html).
	//
	// If you specify a custom AMI, you must set Os to Custom.
	AmiId *string `type:"string"`

	// The instance architecture. The default option is x86_64. Instance types do
	// not necessarily support both architectures. For a list of the architectures
	// that are supported by the different instance types, see Instance Families
	// and Types (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/instance-types.html).
	Architecture *string `type:"string" enum:"Architecture"`

	// For load-based or time-based instances, the type. Windows stacks can use
	// only time-based instances.
	AutoScalingType *string `type:"string" enum:"AutoScalingType"`

	// The instance Availability Zone. For more information, see Regions and Endpoints
	// (http://docs.aws.amazon.com/general/latest/gr/rande.html).
	AvailabilityZone *string `type:"string"`

	// An array of BlockDeviceMapping objects that specify the instance's block
	// devices. For more information, see Block Device Mapping (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/block-device-mapping-concepts.html).
	// Note that block device mappings are not supported for custom AMIs.
	BlockDeviceMappings []*BlockDeviceMapping `type:"list"`

	// Whether to create an Amazon EBS-optimized instance.
	EbsOptimized *bool `type:"boolean"`

	// The instance host name.
	Hostname *string `type:"string"`

	// Whether to install operating system and package updates when the instance
	// boots. The default value is true. To control when updates are installed,
	// set this value to false. You must then update your instances manually by
	// using CreateDeployment to run the update_dependencies stack command or by
	// manually running yum (Amazon Linux) or apt-get (Ubuntu) on the instances.
	//
	// We strongly recommend using the default value of true to ensure that your
	// instances have the latest security updates.
	InstallUpdatesOnBoot *bool `type:"boolean"`

	// The instance type, such as t2.micro. For a list of supported instance types,
	// open the stack in the console, choose Instances, and choose + Instance. The
	// Size list contains the currently supported types. For more information, see
	// Instance Families and Types (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/instance-types.html).
	// The parameter values that you use to specify the various types are in the
	// API Name column of the Available Instance Types table.
	//
	// InstanceType is a required field
	InstanceType *string `type:"string" required:"true"`

	// An array that contains the instance's layer IDs.
	//
	// LayerIds is a required field
	LayerIds []*string `type:"list" required:"true"`

	// The instance's operating system, which must be set to one of the following.
	//
	//    * A supported Linux operating system: An Amazon Linux version, such as
	//    Amazon Linux 2016.03, Amazon Linux 2015.09, or Amazon Linux 2015.03.
	//
	//    * A supported Ubuntu operating system, such as Ubuntu 16.04 LTS, Ubuntu
	//    14.04 LTS, or Ubuntu 12.04 LTS.
	//
	//    * CentOS 7
	//
	//    * Red Hat Enterprise Linux 7
	//
	//    * A supported Windows operating system, such as Microsoft Windows Server
	//    2012 R2 Base, Microsoft Windows Server 2012 R2 with SQL Server Express,
	//    Microsoft Windows Server 2012 R2 with SQL Server Standard, or Microsoft
	//    Windows Server 2012 R2 with SQL Server Web.
	//
	//    * A custom AMI: Custom.
	//
	// For more information on the supported operating systems, see AWS OpsWorks
	// Operating Systems (http://docs.aws.amazon.com/opsworks/latest/userguide/workinginstances-os.html).
	//
	// The default option is the current Amazon Linux version. If you set this parameter
	// to Custom, you must use the CreateInstance action's AmiId parameter to specify
	// the custom AMI that you want to use. Block device mappings are not supported
	// if the value is Custom. For more information on the supported operating systems,
	// see Operating Systems (http://docs.aws.amazon.com/opsworks/latest/userguide/workinginstances-os.html)For
	// more information on how to use custom AMIs with AWS OpsWorks, see Using Custom
	// AMIs (http://docs.aws.amazon.com/opsworks/latest/userguide/workinginstances-custom-ami.html).
	Os *string `type:"string"`

	// The instance root device type. For more information, see Storage for the
	// Root Device (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ComponentsAMIs.html#storage-for-the-root-device).
	RootDeviceType *string `type:"string" enum:"RootDeviceType"`

	// The instance's Amazon EC2 key-pair name.
	SshKeyName *string `type:"string"`

	// The stack ID.
	//
	// StackId is a required field
	StackId *string `type:"string" required:"true"`

	// The ID of the instance's subnet. If the stack is running in a VPC, you can
	// use this parameter to override the stack's default subnet ID value and direct
	// AWS OpsWorks to launch the instance in a different subnet.
	SubnetId *string `type:"string"`

	// The instance's tenancy option. The default option is no tenancy, or if the
	// instance is running in a VPC, inherit tenancy settings from the VPC. The
	// following are valid values for this parameter: dedicated, default, or host.
	// Because there are costs associated with changes in tenancy options, we recommend
	// that you research tenancy options before choosing them for your instances.
	// For more information about dedicated hosts, see Dedicated Hosts Overview
	// (http://aws.amazon.com/ec2/dedicated-hosts/) and Amazon EC2 Dedicated Hosts
	// (http://aws.amazon.com/ec2/dedicated-hosts/). For more information about
	// dedicated instances, see Dedicated Instances (http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/dedicated-instance.html)
	// and Amazon EC2 Dedicated Instances (http://aws.amazon.com/ec2/purchasing-options/dedicated-instances/).
	Tenancy *string `type:"string"`

	// The instance's virtualization type, paravirtual or hvm.
	VirtualizationType *string `type:"string"`
	// contains filtered or unexported fields
}

type CreateInstanceOutput struct {

	// The instance ID.
	InstanceId *string `type:"string"`
	// contains filtered or unexported fields
}

type CreateLayerInput struct {

	// One or more user-defined key-value pairs to be added to the stack attributes.
	//
	// To create a cluster layer, set the EcsClusterArn attribute to the cluster's
	// ARN.
	Attributes map[string]*string `type:"map"`

	// Whether to automatically assign an Elastic IP address (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/elastic-ip-addresses-eip.html)
	// to the layer's instances. For more information, see How to Edit a Layer (http://docs.aws.amazon.com/opsworks/latest/userguide/workinglayers-basics-edit.html).
	AutoAssignElasticIps *bool `type:"boolean"`

	// For stacks that are running in a VPC, whether to automatically assign a public
	// IP address to the layer's instances. For more information, see How to Edit
	// a Layer (http://docs.aws.amazon.com/opsworks/latest/userguide/workinglayers-basics-edit.html).
	AutoAssignPublicIps *bool `type:"boolean"`

	// The ARN of an IAM profile to be used for the layer's EC2 instances. For more
	// information about IAM ARNs, see Using Identifiers (http://docs.aws.amazon.com/IAM/latest/UserGuide/Using_Identifiers.html).
	CustomInstanceProfileArn *string `type:"string"`

	// A JSON-formatted string containing custom stack configuration and deployment
	// attributes to be installed on the layer's instances. For more information,
	// see  Using Custom JSON (http://docs.aws.amazon.com/opsworks/latest/userguide/workingcookbook-json-override.html).
	// This feature is supported as of version 1.7.42 of the AWS CLI.
	CustomJson *string `type:"string"`

	// A LayerCustomRecipes object that specifies the layer custom recipes.
	CustomRecipes *Recipes `type:"structure"`

	// An array containing the layer custom security group IDs.
	CustomSecurityGroupIds []*string `type:"list"`

	// Whether to disable auto healing for the layer.
	EnableAutoHealing *bool `type:"boolean"`

	// Whether to install operating system and package updates when the instance
	// boots. The default value is true. To control when updates are installed,
	// set this value to false. You must then update your instances manually by
	// using CreateDeployment to run the update_dependencies stack command or by
	// manually running yum (Amazon Linux) or apt-get (Ubuntu) on the instances.
	//
	// To ensure that your instances have the latest security updates, we strongly
	// recommend using the default value of true.
	InstallUpdatesOnBoot *bool `type:"boolean"`

	// A LifeCycleEventConfiguration object that you can use to configure the Shutdown
	// event to specify an execution timeout and enable or disable Elastic Load
	// Balancer connection draining.
	LifecycleEventConfiguration *LifecycleEventConfiguration `type:"structure"`

	// The layer name, which is used by the console.
	//
	// Name is a required field
	Name *string `type:"string" required:"true"`

	// An array of Package objects that describes the layer packages.
	Packages []*string `type:"list"`

	// For custom layers only, use this parameter to specify the layer's short name,
	// which is used internally by AWS OpsWorks and by Chef recipes. The short name
	// is also used as the name for the directory where your app files are installed.
	// It can have a maximum of 200 characters, which are limited to the alphanumeric
	// characters, '-', '_', and '.'.
	//
	// The built-in layers' short names are defined by AWS OpsWorks. For more information,
	// see the Layer Reference (http://docs.aws.amazon.com/opsworks/latest/userguide/layers.html).
	//
	// Shortname is a required field
	Shortname *string `type:"string" required:"true"`

	// The layer stack ID.
	//
	// StackId is a required field
	StackId *string `type:"string" required:"true"`

	// The layer type. A stack cannot have more than one built-in layer of the same
	// type. It can have any number of custom layers. Built-in layers are not available
	// in Chef 12 stacks.
	//
	// Type is a required field
	Type *string `type:"string" required:"true" enum:"LayerType"`

	// Whether to use Amazon EBS-optimized instances.
	UseEbsOptimizedInstances *bool `type:"boolean"`

	// A VolumeConfigurations object that describes the layer's Amazon EBS volumes.
	VolumeConfigurations []*VolumeConfiguration `type:"list"`
	// contains filtered or unexported fields
}

type CreateLayerOutput struct {

	// The layer ID.
	LayerId *string `type:"string"`
	// contains filtered or unexported fields
}

type CreateStackInput struct {

	// The default AWS OpsWorks agent version. You have the following options:
	//
	//    * Auto-update - Set this parameter to LATEST. AWS OpsWorks automatically
	//    installs new agent versions on the stack's instances as soon as they are
	//    available.
	//
	//    * Fixed version - Set this parameter to your preferred agent version.
	//    To update the agent version, you must edit the stack configuration and
	//    specify a new version. AWS OpsWorks then automatically installs that version
	//    on the stack's instances.
	//
	// The default setting is the most recent release of the agent. To specify an
	// agent version, you must use the complete version number, not the abbreviated
	// number shown on the console. For a list of available agent version numbers,
	// call DescribeAgentVersions.
	//
	// You can also specify an agent version when you create or update an instance,
	// which overrides the stack's default setting.
	AgentVersion *string `type:"string"`

	// One or more user-defined key-value pairs to be added to the stack attributes.
	Attributes map[string]*string `type:"map"`

	// A ChefConfiguration object that specifies whether to enable Berkshelf and
	// the Berkshelf version on Chef 11.10 stacks. For more information, see Create
	// a New Stack (http://docs.aws.amazon.com/opsworks/latest/userguide/workingstacks-creating.html).
	ChefConfiguration *ChefConfiguration `type:"structure"`

	// The configuration manager. When you create a stack we recommend that you
	// use the configuration manager to specify the Chef version: 12, 11.10, or
	// 11.4 for Linux stacks, or 12.2 for Windows stacks. The default value for
	// Linux stacks is currently 11.4.
	ConfigurationManager *StackConfigurationManager `type:"structure"`

	// Contains the information required to retrieve an app or cookbook from a repository.
	// For more information, see Creating Apps (http://docs.aws.amazon.com/opsworks/latest/userguide/workingapps-creating.html)
	// or Custom Recipes and Cookbooks (http://docs.aws.amazon.com/opsworks/latest/userguide/workingcookbook.html).
	CustomCookbooksSource *Source `type:"structure"`

	// A string that contains user-defined, custom JSON. It can be used to override
	// the corresponding default stack configuration attribute values or to pass
	// data to recipes. The string should be in the following format:
	//
	// "{\"key1\": \"value1\", \"key2\": \"value2\",...}"
	//
	// For more information on custom JSON, see Use Custom JSON to Modify the Stack
	// Configuration Attributes (http://docs.aws.amazon.com/opsworks/latest/userguide/workingstacks-json.html).
	CustomJson *string `type:"string"`

	// The stack's default Availability Zone, which must be in the specified region.
	// For more information, see Regions and Endpoints (http://docs.aws.amazon.com/general/latest/gr/rande.html).
	// If you also specify a value for DefaultSubnetId, the subnet must be in the
	// same zone. For more information, see the VpcId parameter description.
	DefaultAvailabilityZone *string `type:"string"`

	// The Amazon Resource Name (ARN) of an IAM profile that is the default profile
	// for all of the stack's EC2 instances. For more information about IAM ARNs,
	// see Using Identifiers (http://docs.aws.amazon.com/IAM/latest/UserGuide/Using_Identifiers.html).
	//
	// DefaultInstanceProfileArn is a required field
	DefaultInstanceProfileArn *string `type:"string" required:"true"`

	// The stack's default operating system, which is installed on every instance
	// unless you specify a different operating system when you create the instance.
	// You can specify one of the following.
	//
	//    * A supported Linux operating system: An Amazon Linux version, such as
	//    Amazon Linux 2016.03, Amazon Linux 2015.09, or Amazon Linux 2015.03.
	//
	//    * A supported Ubuntu operating system, such as Ubuntu 16.04 LTS, Ubuntu
	//    14.04 LTS, or Ubuntu 12.04 LTS.
	//
	//    * CentOS 7
	//
	//    * Red Hat Enterprise Linux 7
	//
	//    * A supported Windows operating system, such as Microsoft Windows Server
	//    2012 R2 Base, Microsoft Windows Server 2012 R2 with SQL Server Express,
	//    Microsoft Windows Server 2012 R2 with SQL Server Standard, or Microsoft
	//    Windows Server 2012 R2 with SQL Server Web.
	//
	//    * A custom AMI: Custom. You specify the custom AMI you want to use when
	//    you create instances. For more information, see  Using Custom AMIs (http://docs.aws.amazon.com/opsworks/latest/userguide/workinginstances-custom-ami.html).
	//
	// The default option is the current Amazon Linux version. For more information
	// on the supported operating systems, see AWS OpsWorks Operating Systems (http://docs.aws.amazon.com/opsworks/latest/userguide/workinginstances-os.html).
	DefaultOs *string `type:"string"`

	// The default root device type. This value is the default for all instances
	// in the stack, but you can override it when you create an instance. The default
	// option is instance-store. For more information, see Storage for the Root
	// Device (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ComponentsAMIs.html#storage-for-the-root-device).
	DefaultRootDeviceType *string `type:"string" enum:"RootDeviceType"`

	// A default Amazon EC2 key pair name. The default value is none. If you specify
	// a key pair name, AWS OpsWorks installs the public key on the instance and
	// you can use the private key with an SSH client to log in to the instance.
	// For more information, see  Using SSH to Communicate with an Instance (http://docs.aws.amazon.com/opsworks/latest/userguide/workinginstances-ssh.html)
	// and  Managing SSH Access (http://docs.aws.amazon.com/opsworks/latest/userguide/security-ssh-access.html).
	// You can override this setting by specifying a different key pair, or no key
	// pair, when you  create an instance (http://docs.aws.amazon.com/opsworks/latest/userguide/workinginstances-add.html).
	DefaultSshKeyName *string `type:"string"`

	// The stack's default VPC subnet ID. This parameter is required if you specify
	// a value for the VpcId parameter. All instances are launched into this subnet
	// unless you specify otherwise when you create the instance. If you also specify
	// a value for DefaultAvailabilityZone, the subnet must be in that zone. For
	// information on default values and when this parameter is required, see the
	// VpcId parameter description.
	DefaultSubnetId *string `type:"string"`

	// The stack's host name theme, with spaces replaced by underscores. The theme
	// is used to generate host names for the stack's instances. By default, HostnameTheme
	// is set to Layer_Dependent, which creates host names by appending integers
	// to the layer's short name. The other themes are:
	//
	//    * Baked_Goods
	//
	//    * Clouds
	//
	//    * Europe_Cities
	//
	//    * Fruits
	//
	//    * Greek_Deities
	//
	//    * Legendary_creatures_from_Japan
	//
	//    * Planets_and_Moons
	//
	//    * Roman_Deities
	//
	//    * Scottish_Islands
	//
	//    * US_Cities
	//
	//    * Wild_Cats
	//
	// To obtain a generated host name, call GetHostNameSuggestion, which returns
	// a host name based on the current theme.
	HostnameTheme *string `type:"string"`

	// The stack name.
	//
	// Name is a required field
	Name *string `type:"string" required:"true"`

	// The stack's AWS region, such as "ap-south-1". For more information about
	// Amazon regions, see Regions and Endpoints (http://docs.aws.amazon.com/general/latest/gr/rande.html).
	//
	// Region is a required field
	Region *string `type:"string" required:"true"`

	// The stack's AWS Identity and Access Management (IAM) role, which allows AWS
	// OpsWorks to work with AWS resources on your behalf. You must set this parameter
	// to the Amazon Resource Name (ARN) for an existing IAM role. For more information
	// about IAM ARNs, see Using Identifiers (http://docs.aws.amazon.com/IAM/latest/UserGuide/Using_Identifiers.html).
	//
	// ServiceRoleArn is a required field
	ServiceRoleArn *string `type:"string" required:"true"`

	// Whether the stack uses custom cookbooks.
	UseCustomCookbooks *bool `type:"boolean"`

	// Whether to associate the AWS OpsWorks built-in security groups with the stack's
	// layers.
	//
	// AWS OpsWorks provides a standard set of built-in security groups, one for
	// each layer, which are associated with layers by default. With UseOpsworksSecurityGroups
	// you can instead provide your own custom security groups. UseOpsworksSecurityGroups
	// has the following settings:
	//
	//    * True - AWS OpsWorks automatically associates the appropriate built-in
	//    security group with each layer (default setting). You can associate additional
	//    security groups with a layer after you create it, but you cannot delete
	//    the built-in security group.
	//
	//    * False - AWS OpsWorks does not associate built-in security groups with
	//    layers. You must create appropriate EC2 security groups and associate
	//    a security group with each layer that you create. However, you can still
	//    manually associate a built-in security group with a layer on creation;
	//    custom security groups are required only for those layers that need custom
	//    settings.
	//
	// For more information, see Create a New Stack (http://docs.aws.amazon.com/opsworks/latest/userguide/workingstacks-creating.html).
	UseOpsworksSecurityGroups *bool `type:"boolean"`

	// The ID of the VPC that the stack is to be launched into. The VPC must be
	// in the stack's region. All instances are launched into this VPC. You cannot
	// change the ID later.
	//
	//    * If your account supports EC2-Classic, the default value is no VPC.
	//
	//    * If your account does not support EC2-Classic, the default value is the
	//    default VPC for the specified region.
	//
	// If the VPC ID corresponds to a default VPC and you have specified either
	// the DefaultAvailabilityZone or the DefaultSubnetId parameter only, AWS OpsWorks
	// infers the value of the other parameter. If you specify neither parameter,
	// AWS OpsWorks sets these parameters to the first valid Availability Zone for
	// the specified region and the corresponding default VPC subnet ID, respectively.
	//
	// If you specify a nondefault VPC ID, note the following:
	//
	//    * It must belong to a VPC in your account that is in the specified region.
	//
	//    * You must specify a value for DefaultSubnetId.
	//
	// For more information on how to use AWS OpsWorks with a VPC, see Running a
	// Stack in a VPC (http://docs.aws.amazon.com/opsworks/latest/userguide/workingstacks-vpc.html).
	// For more information on default VPC and EC2-Classic, see Supported Platforms
	// (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-supported-platforms.html).
	VpcId *string `type:"string"`
	// contains filtered or unexported fields
}

type CreateStackOutput struct {

	// The stack ID, which is an opaque string that you use to identify the stack
	// when performing actions such as DescribeStacks.
	StackId *string `type:"string"`
	// contains filtered or unexported fields
}

type CreateUserProfileInput struct {

	// Whether users can specify their own SSH public key through the My Settings
	// page. For more information, see Setting an IAM User's Public SSH Key (http://docs.aws.amazon.com/opsworks/latest/userguide/security-settingsshkey.html).
	AllowSelfManagement *bool `type:"boolean"`

	// The user's IAM ARN; this can also be a federated user's ARN.
	//
	// IamUserArn is a required field
	IamUserArn *string `type:"string" required:"true"`

	// The user's public SSH key.
	SshPublicKey *string `type:"string"`

	// The user's SSH user name. The allowable characters are [a-z], [A-Z], [0-9],
	// '-', and '_'. If the specified name includes other punctuation marks, AWS
	// OpsWorks removes them. For example, my.name will be changed to myname. If
	// you do not specify an SSH user name, AWS OpsWorks generates one from the
	// IAM user name.
	SshUsername *string `type:"string"`
	// contains filtered or unexported fields
}

type CreateUserProfileOutput struct {

	// The user's IAM ARN.
	IamUserArn *string `type:"string"`
	// contains filtered or unexported fields
}

type DataSource struct {

	// The data source's ARN.
	Arn *string `type:"string"`

	// The database name.
	DatabaseName *string `type:"string"`

	// The data source's type, AutoSelectOpsworksMysqlInstance, OpsworksMysqlInstance,
	// or RdsDbInstance.
	Type *string `type:"string"`
	// contains filtered or unexported fields
}

type DeleteAppInput struct {

	// The app ID.
	//
	// AppId is a required field
	AppId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

type DeleteAppOutput struct {
	// contains filtered or unexported fields
}

type DeleteInstanceInput struct {

	// Whether to delete the instance Elastic IP address.
	DeleteElasticIp *bool `type:"boolean"`

	// Whether to delete the instance's Amazon EBS volumes.
	DeleteVolumes *bool `type:"boolean"`

	// The instance ID.
	//
	// InstanceId is a required field
	InstanceId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

type DeleteInstanceOutput struct {
	// contains filtered or unexported fields
}

type DeleteLayerInput struct {

	// The layer ID.
	//
	// LayerId is a required field
	LayerId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

type DeleteLayerOutput struct {
	// contains filtered or unexported fields
}

type DeleteStackInput struct {

	// The stack ID.
	//
	// StackId is a required field
	StackId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

type DeleteStackOutput struct {
	// contains filtered or unexported fields
}

type DeleteUserProfileInput struct {

	// The user's IAM ARN. This can also be a federated user's ARN.
	//
	// IamUserArn is a required field
	IamUserArn *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

type DeleteUserProfileOutput struct {
	// contains filtered or unexported fields
}

type Deployment struct {

	// The app ID.
	AppId *string `type:"string"`

	// Used to specify a stack or deployment command.
	Command *DeploymentCommand `type:"structure"`

	// A user-defined comment.
	Comment *string `type:"string"`

	// Date when the deployment completed.
	CompletedAt *string `type:"string"`

	// Date when the deployment was created.
	CreatedAt *string `type:"string"`

	// A string that contains user-defined custom JSON. It can be used to override
	// the corresponding default stack configuration attribute values for stack
	// or to pass data to recipes. The string should be in the following format:
	//
	// "{\"key1\": \"value1\", \"key2\": \"value2\",...}"
	//
	// For more information on custom JSON, see Use Custom JSON to Modify the Stack
	// Configuration Attributes (http://docs.aws.amazon.com/opsworks/latest/userguide/workingstacks-json.html).
	CustomJson *string `type:"string"`

	// The deployment ID.
	DeploymentId *string `type:"string"`

	// The deployment duration.
	Duration *int64 `type:"integer"`

	// The user's IAM ARN.
	IamUserArn *string `type:"string"`

	// The IDs of the target instances.
	InstanceIds []*string `type:"list"`

	// The stack ID.
	StackId *string `type:"string"`

	// The deployment status:
	//
	//    * running
	//
	//    * successful
	//
	//    * failed
	Status *string `type:"string"`
	// contains filtered or unexported fields
}