ecr

func (AuthorizationData) GoString ¶

func (s AuthorizationData) GoString() string

GoString returns the string representation

func (AuthorizationData) String ¶

func (s AuthorizationData) String() string

String returns the string representation

func (BatchCheckLayerAvailabilityInput) GoString ¶

func (s BatchCheckLayerAvailabilityInput) GoString() string

GoString returns the string representation

func (BatchCheckLayerAvailabilityInput) String ¶

func (s BatchCheckLayerAvailabilityInput) String() string

String returns the string representation

func (*BatchCheckLayerAvailabilityInput) Validate ¶

func (s *BatchCheckLayerAvailabilityInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

func (BatchCheckLayerAvailabilityOutput) GoString ¶

func (s BatchCheckLayerAvailabilityOutput) GoString() string

GoString returns the string representation

func (BatchCheckLayerAvailabilityOutput) String ¶

func (s BatchCheckLayerAvailabilityOutput) String() string

String returns the string representation

func (BatchDeleteImageInput) GoString ¶

func (s BatchDeleteImageInput) GoString() string

GoString returns the string representation

func (BatchDeleteImageInput) String ¶

func (s BatchDeleteImageInput) String() string

String returns the string representation

func (*BatchDeleteImageInput) Validate ¶

func (s *BatchDeleteImageInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

func (BatchDeleteImageOutput) GoString ¶

func (s BatchDeleteImageOutput) GoString() string

GoString returns the string representation

func (BatchDeleteImageOutput) String ¶

func (s BatchDeleteImageOutput) String() string

String returns the string representation

func (BatchGetImageInput) GoString ¶

func (s BatchGetImageInput) GoString() string

GoString returns the string representation

func (BatchGetImageInput) String ¶

func (s BatchGetImageInput) String() string

String returns the string representation

func (*BatchGetImageInput) Validate ¶

func (s *BatchGetImageInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

func (BatchGetImageOutput) GoString ¶

func (s BatchGetImageOutput) GoString() string

GoString returns the string representation

func (BatchGetImageOutput) String ¶

func (s BatchGetImageOutput) String() string

String returns the string representation

func (CompleteLayerUploadInput) GoString ¶

func (s CompleteLayerUploadInput) GoString() string

GoString returns the string representation

func (CompleteLayerUploadInput) String ¶

func (s CompleteLayerUploadInput) String() string

String returns the string representation

func (*CompleteLayerUploadInput) Validate ¶

func (s *CompleteLayerUploadInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

func (CompleteLayerUploadOutput) GoString ¶

func (s CompleteLayerUploadOutput) GoString() string

GoString returns the string representation

func (CompleteLayerUploadOutput) String ¶

func (s CompleteLayerUploadOutput) String() string

String returns the string representation

func (CreateRepositoryInput) GoString ¶

func (s CreateRepositoryInput) GoString() string

GoString returns the string representation

func (CreateRepositoryInput) String ¶

func (s CreateRepositoryInput) String() string

String returns the string representation

func (*CreateRepositoryInput) Validate ¶

func (s *CreateRepositoryInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

func (CreateRepositoryOutput) GoString ¶

func (s CreateRepositoryOutput) GoString() string

GoString returns the string representation

func (CreateRepositoryOutput) String ¶

func (s CreateRepositoryOutput) String() string

String returns the string representation

func (DeleteRepositoryInput) GoString ¶

func (s DeleteRepositoryInput) GoString() string

GoString returns the string representation

func (DeleteRepositoryInput) String ¶

func (s DeleteRepositoryInput) String() string

String returns the string representation

func (*DeleteRepositoryInput) Validate ¶

func (s *DeleteRepositoryInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

func (DeleteRepositoryOutput) GoString ¶

func (s DeleteRepositoryOutput) GoString() string

GoString returns the string representation

func (DeleteRepositoryOutput) String ¶

func (s DeleteRepositoryOutput) String() string

String returns the string representation

func (DeleteRepositoryPolicyInput) GoString ¶

func (s DeleteRepositoryPolicyInput) GoString() string

GoString returns the string representation

func (DeleteRepositoryPolicyInput) String ¶

func (s DeleteRepositoryPolicyInput) String() string

String returns the string representation

func (*DeleteRepositoryPolicyInput) Validate ¶

func (s *DeleteRepositoryPolicyInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

func (DeleteRepositoryPolicyOutput) GoString ¶

func (s DeleteRepositoryPolicyOutput) GoString() string

GoString returns the string representation

func (DeleteRepositoryPolicyOutput) String ¶

func (s DeleteRepositoryPolicyOutput) String() string

String returns the string representation

func (DescribeImagesFilter) GoString ¶

func (s DescribeImagesFilter) GoString() string

GoString returns the string representation

func (DescribeImagesFilter) String ¶

func (s DescribeImagesFilter) String() string

String returns the string representation

func (DescribeImagesInput) GoString ¶

func (s DescribeImagesInput) GoString() string

GoString returns the string representation

func (DescribeImagesInput) String ¶

func (s DescribeImagesInput) String() string

String returns the string representation

func (*DescribeImagesInput) Validate ¶

func (s *DescribeImagesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

func (DescribeImagesOutput) GoString ¶

func (s DescribeImagesOutput) GoString() string

GoString returns the string representation

func (DescribeImagesOutput) String ¶

func (s DescribeImagesOutput) String() string

String returns the string representation

func (DescribeRepositoriesInput) GoString ¶

func (s DescribeRepositoriesInput) GoString() string

GoString returns the string representation

func (DescribeRepositoriesInput) String ¶

func (s DescribeRepositoriesInput) String() string

String returns the string representation

func (*DescribeRepositoriesInput) Validate ¶

func (s *DescribeRepositoriesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

func (DescribeRepositoriesOutput) GoString ¶

func (s DescribeRepositoriesOutput) GoString() string

GoString returns the string representation

func (DescribeRepositoriesOutput) String ¶

func (s DescribeRepositoriesOutput) String() string

String returns the string representation

func (*ECR) BatchCheckLayerAvailability ¶

func (c *ECR) BatchCheckLayerAvailability(input *BatchCheckLayerAvailabilityInput) (*BatchCheckLayerAvailabilityOutput, error)

BatchCheckLayerAvailability API operation for Amazon EC2 Container Registry.

Check the availability of multiple image layers in a specified registry and repository.

This operation is used by the Amazon ECR proxy, and it is not intended for general use by customers. Use the docker CLI to pull, tag, and push images.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Registry's API operation BatchCheckLayerAvailability for usage and error information.

Returned Error Codes:

• RepositoryNotFoundException The specified repository could not be found. Check the spelling of the specified repository and ensure that you are performing operations on the correct registry.

• InvalidParameterException The specified parameter is invalid. Review the available parameters for the API request.

• ServerException These errors are usually caused by a server-side issue.

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ecr"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ecr.New(sess)

	params := &ecr.BatchCheckLayerAvailabilityInput{
		LayerDigests: []*string{ // Required
			aws.String("BatchedOperationLayerDigest"), // Required
			// More values...
		},
		RepositoryName: aws.String("RepositoryName"), // Required
		RegistryId:     aws.String("RegistryId"),
	}
	resp, err := svc.BatchCheckLayerAvailability(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ECR) BatchCheckLayerAvailabilityRequest ¶

func (c *ECR) BatchCheckLayerAvailabilityRequest(input *BatchCheckLayerAvailabilityInput) (req *request.Request, output *BatchCheckLayerAvailabilityOutput)

BatchCheckLayerAvailabilityRequest generates a "aws/request.Request" representing the client's request for the BatchCheckLayerAvailability operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See BatchCheckLayerAvailability for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the BatchCheckLayerAvailability method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the BatchCheckLayerAvailabilityRequest method.
req, resp := client.BatchCheckLayerAvailabilityRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*ECR) BatchDeleteImage ¶

func (c *ECR) BatchDeleteImage(input *BatchDeleteImageInput) (*BatchDeleteImageOutput, error)

BatchDeleteImage API operation for Amazon EC2 Container Registry.

Deletes a list of specified images within a specified repository. Images are specified with either imageTag or imageDigest.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Registry's API operation BatchDeleteImage for usage and error information.

Returned Error Codes:

• ServerException These errors are usually caused by a server-side issue.

• InvalidParameterException The specified parameter is invalid. Review the available parameters for the API request.

• RepositoryNotFoundException The specified repository could not be found. Check the spelling of the specified repository and ensure that you are performing operations on the correct registry.

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ecr"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ecr.New(sess)

	params := &ecr.BatchDeleteImageInput{
		ImageIds: []*ecr.ImageIdentifier{ // Required
			{ // Required
				ImageDigest: aws.String("ImageDigest"),
				ImageTag:    aws.String("ImageTag"),
			},
			// More values...
		},
		RepositoryName: aws.String("RepositoryName"), // Required
		RegistryId:     aws.String("RegistryId"),
	}
	resp, err := svc.BatchDeleteImage(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ECR) BatchDeleteImageRequest ¶

func (c *ECR) BatchDeleteImageRequest(input *BatchDeleteImageInput) (req *request.Request, output *BatchDeleteImageOutput)

BatchDeleteImageRequest generates a "aws/request.Request" representing the client's request for the BatchDeleteImage operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See BatchDeleteImage for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the BatchDeleteImage method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the BatchDeleteImageRequest method.
req, resp := client.BatchDeleteImageRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*ECR) BatchGetImage ¶

func (c *ECR) BatchGetImage(input *BatchGetImageInput) (*BatchGetImageOutput, error)

BatchGetImage API operation for Amazon EC2 Container Registry.

Gets detailed information for specified images within a specified repository. Images are specified with either imageTag or imageDigest.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Registry's API operation BatchGetImage for usage and error information.

Returned Error Codes:

• ServerException These errors are usually caused by a server-side issue.

• InvalidParameterException The specified parameter is invalid. Review the available parameters for the API request.

• RepositoryNotFoundException The specified repository could not be found. Check the spelling of the specified repository and ensure that you are performing operations on the correct registry.

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ecr"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ecr.New(sess)

	params := &ecr.BatchGetImageInput{
		ImageIds: []*ecr.ImageIdentifier{ // Required
			{ // Required
				ImageDigest: aws.String("ImageDigest"),
				ImageTag:    aws.String("ImageTag"),
			},
			// More values...
		},
		RepositoryName: aws.String("RepositoryName"), // Required
		RegistryId:     aws.String("RegistryId"),
	}
	resp, err := svc.BatchGetImage(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ECR) BatchGetImageRequest ¶

func (c *ECR) BatchGetImageRequest(input *BatchGetImageInput) (req *request.Request, output *BatchGetImageOutput)

BatchGetImageRequest generates a "aws/request.Request" representing the client's request for the BatchGetImage operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See BatchGetImage for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the BatchGetImage method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the BatchGetImageRequest method.
req, resp := client.BatchGetImageRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*ECR) CompleteLayerUpload ¶

func (c *ECR) CompleteLayerUpload(input *CompleteLayerUploadInput) (*CompleteLayerUploadOutput, error)

CompleteLayerUpload API operation for Amazon EC2 Container Registry.

Inform Amazon ECR that the image layer upload for a specified registry, repository name, and upload ID, has completed. You can optionally provide a sha256 digest of the image layer for data validation purposes.

This operation is used by the Amazon ECR proxy, and it is not intended for general use by customers. Use the docker CLI to pull, tag, and push images.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Registry's API operation CompleteLayerUpload for usage and error information.

Returned Error Codes:

• ServerException These errors are usually caused by a server-side issue.

• InvalidParameterException The specified parameter is invalid. Review the available parameters for the API request.

• RepositoryNotFoundException The specified repository could not be found. Check the spelling of the specified repository and ensure that you are performing operations on the correct registry.

• UploadNotFoundException The upload could not be found, or the specified upload id is not valid for this repository.

• InvalidLayerException The layer digest calculation performed by Amazon ECR upon receipt of the image layer does not match the digest specified.

• LayerPartTooSmallException Layer parts must be at least 5 MiB in size.

• LayerAlreadyExistsException The image layer already exists in the associated repository.

• EmptyUploadException The specified layer upload does not contain any layer parts.

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ecr"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ecr.New(sess)

	params := &ecr.CompleteLayerUploadInput{
		LayerDigests: []*string{ // Required
			aws.String("LayerDigest"), // Required
			// More values...
		},
		RepositoryName: aws.String("RepositoryName"), // Required
		UploadId:       aws.String("UploadId"),       // Required
		RegistryId:     aws.String("RegistryId"),
	}
	resp, err := svc.CompleteLayerUpload(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ECR) CompleteLayerUploadRequest ¶

func (c *ECR) CompleteLayerUploadRequest(input *CompleteLayerUploadInput) (req *request.Request, output *CompleteLayerUploadOutput)

CompleteLayerUploadRequest generates a "aws/request.Request" representing the client's request for the CompleteLayerUpload operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See CompleteLayerUpload for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CompleteLayerUpload method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the CompleteLayerUploadRequest method.
req, resp := client.CompleteLayerUploadRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*ECR) CreateRepository ¶

func (c *ECR) CreateRepository(input *CreateRepositoryInput) (*CreateRepositoryOutput, error)

CreateRepository API operation for Amazon EC2 Container Registry.

Creates an image repository.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Registry's API operation CreateRepository for usage and error information.

Returned Error Codes:

• ServerException These errors are usually caused by a server-side issue.

• InvalidParameterException The specified parameter is invalid. Review the available parameters for the API request.

• RepositoryAlreadyExistsException The specified repository already exists in the specified registry.

• LimitExceededException The operation did not succeed because it would have exceeded a service limit for your account. For more information, see Amazon ECR Default Service Limits (http://docs.aws.amazon.com/AmazonECR/latest/userguide/service_limits.html) in the Amazon EC2 Container Registry User Guide.

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ecr"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ecr.New(sess)

	params := &ecr.CreateRepositoryInput{
		RepositoryName: aws.String("RepositoryName"), // Required
	}
	resp, err := svc.CreateRepository(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ECR) CreateRepositoryRequest ¶

func (c *ECR) CreateRepositoryRequest(input *CreateRepositoryInput) (req *request.Request, output *CreateRepositoryOutput)

CreateRepositoryRequest generates a "aws/request.Request" representing the client's request for the CreateRepository operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See CreateRepository for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateRepository method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the CreateRepositoryRequest method.
req, resp := client.CreateRepositoryRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*ECR) DeleteRepository ¶

func (c *ECR) DeleteRepository(input *DeleteRepositoryInput) (*DeleteRepositoryOutput, error)

DeleteRepository API operation for Amazon EC2 Container Registry.

Deletes an existing image repository. If a repository contains images, you must use the force option to delete it.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Registry's API operation DeleteRepository for usage and error information.

Returned Error Codes:

• ServerException These errors are usually caused by a server-side issue.

• InvalidParameterException The specified parameter is invalid. Review the available parameters for the API request.

• RepositoryNotFoundException The specified repository could not be found. Check the spelling of the specified repository and ensure that you are performing operations on the correct registry.

• RepositoryNotEmptyException The specified repository contains images. To delete a repository that contains images, you must force the deletion with the force parameter.

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ecr"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ecr.New(sess)

	params := &ecr.DeleteRepositoryInput{
		RepositoryName: aws.String("RepositoryName"), // Required
		Force:          aws.Bool(true),
		RegistryId:     aws.String("RegistryId"),
	}
	resp, err := svc.DeleteRepository(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ECR) DeleteRepositoryPolicy ¶

func (c *ECR) DeleteRepositoryPolicy(input *DeleteRepositoryPolicyInput) (*DeleteRepositoryPolicyOutput, error)

DeleteRepositoryPolicy API operation for Amazon EC2 Container Registry.

Deletes the repository policy from a specified repository.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Registry's API operation DeleteRepositoryPolicy for usage and error information.

Returned Error Codes:

• ServerException These errors are usually caused by a server-side issue.

• InvalidParameterException The specified parameter is invalid. Review the available parameters for the API request.

• RepositoryNotFoundException The specified repository could not be found. Check the spelling of the specified repository and ensure that you are performing operations on the correct registry.

• RepositoryPolicyNotFoundException The specified repository and registry combination does not have an associated repository policy.

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ecr"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ecr.New(sess)

	params := &ecr.DeleteRepositoryPolicyInput{
		RepositoryName: aws.String("RepositoryName"), // Required
		RegistryId:     aws.String("RegistryId"),
	}
	resp, err := svc.DeleteRepositoryPolicy(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ECR) DeleteRepositoryPolicyRequest ¶

func (c *ECR) DeleteRepositoryPolicyRequest(input *DeleteRepositoryPolicyInput) (req *request.Request, output *DeleteRepositoryPolicyOutput)

DeleteRepositoryPolicyRequest generates a "aws/request.Request" representing the client's request for the DeleteRepositoryPolicy operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DeleteRepositoryPolicy for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteRepositoryPolicy method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DeleteRepositoryPolicyRequest method.
req, resp := client.DeleteRepositoryPolicyRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*ECR) DeleteRepositoryRequest ¶

func (c *ECR) DeleteRepositoryRequest(input *DeleteRepositoryInput) (req *request.Request, output *DeleteRepositoryOutput)

DeleteRepositoryRequest generates a "aws/request.Request" representing the client's request for the DeleteRepository operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DeleteRepository for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteRepository method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DeleteRepositoryRequest method.
req, resp := client.DeleteRepositoryRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*ECR) DescribeImages ¶

func (c *ECR) DescribeImages(input *DescribeImagesInput) (*DescribeImagesOutput, error)

DescribeImages API operation for Amazon EC2 Container Registry.

Returns metadata about the images in a repository, including image size and creation date.

Beginning with Docker version 1.9, the Docker client compresses image layers before pushing them to a V2 Docker registry. The output of the docker images command shows the uncompressed image size, so it may return a larger image size than the image sizes returned by DescribeImages.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Registry's API operation DescribeImages for usage and error information.

Returned Error Codes:

• ServerException These errors are usually caused by a server-side issue.

• InvalidParameterException The specified parameter is invalid. Review the available parameters for the API request.

• RepositoryNotFoundException The specified repository could not be found. Check the spelling of the specified repository and ensure that you are performing operations on the correct registry.

• ImageNotFoundException The image requested does not exist in the specified repository.

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ecr"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ecr.New(sess)

	params := &ecr.DescribeImagesInput{
		RepositoryName: aws.String("RepositoryName"), // Required
		Filter: &ecr.DescribeImagesFilter{
			TagStatus: aws.String("TagStatus"),
		},
		ImageIds: []*ecr.ImageIdentifier{
			{ // Required
				ImageDigest: aws.String("ImageDigest"),
				ImageTag:    aws.String("ImageTag"),
			},
			// More values...
		},
		MaxResults: aws.Int64(1),
		NextToken:  aws.String("NextToken"),
		RegistryId: aws.String("RegistryId"),
	}
	resp, err := svc.DescribeImages(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ECR) DescribeImagesRequest ¶

func (c *ECR) DescribeImagesRequest(input *DescribeImagesInput) (req *request.Request, output *DescribeImagesOutput)

DescribeImagesRequest generates a "aws/request.Request" representing the client's request for the DescribeImages operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeImages for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeImages method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeImagesRequest method.
req, resp := client.DescribeImagesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*ECR) DescribeRepositories ¶

func (c *ECR) DescribeRepositories(input *DescribeRepositoriesInput) (*DescribeRepositoriesOutput, error)

DescribeRepositories API operation for Amazon EC2 Container Registry.

Describes image repositories in a registry.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Registry's API operation DescribeRepositories for usage and error information.

Returned Error Codes:

• ServerException These errors are usually caused by a server-side issue.

• InvalidParameterException The specified parameter is invalid. Review the available parameters for the API request.

• RepositoryNotFoundException The specified repository could not be found. Check the spelling of the specified repository and ensure that you are performing operations on the correct registry.

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ecr"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ecr.New(sess)

	params := &ecr.DescribeRepositoriesInput{
		MaxResults: aws.Int64(1),
		NextToken:  aws.String("NextToken"),
		RegistryId: aws.String("RegistryId"),
		RepositoryNames: []*string{
			aws.String("RepositoryName"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeRepositories(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ECR) DescribeRepositoriesRequest ¶

func (c *ECR) DescribeRepositoriesRequest(input *DescribeRepositoriesInput) (req *request.Request, output *DescribeRepositoriesOutput)

DescribeRepositoriesRequest generates a "aws/request.Request" representing the client's request for the DescribeRepositories operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeRepositories for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeRepositories method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeRepositoriesRequest method.
req, resp := client.DescribeRepositoriesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*ECR) GetAuthorizationToken ¶

func (c *ECR) GetAuthorizationToken(input *GetAuthorizationTokenInput) (*GetAuthorizationTokenOutput, error)

GetAuthorizationToken API operation for Amazon EC2 Container Registry.

Retrieves a token that is valid for a specified registry for 12 hours. This command allows you to use the docker CLI to push and pull images with Amazon ECR. If you do not specify a registry, the default registry is assumed.

The authorizationToken returned for each registry specified is a base64 encoded string that can be decoded and used in a docker login command to authenticate to a registry. The AWS CLI offers an aws ecr get-login command that simplifies the login process.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Registry's API operation GetAuthorizationToken for usage and error information.

Returned Error Codes:

• ServerException These errors are usually caused by a server-side issue.

• InvalidParameterException The specified parameter is invalid. Review the available parameters for the API request.

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ecr"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ecr.New(sess)

	params := &ecr.GetAuthorizationTokenInput{
		RegistryIds: []*string{
			aws.String("RegistryId"), // Required
			// More values...
		},
	}
	resp, err := svc.GetAuthorizationToken(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ECR) GetAuthorizationTokenRequest ¶

func (c *ECR) GetAuthorizationTokenRequest(input *GetAuthorizationTokenInput) (req *request.Request, output *GetAuthorizationTokenOutput)

GetAuthorizationTokenRequest generates a "aws/request.Request" representing the client's request for the GetAuthorizationToken operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See GetAuthorizationToken for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetAuthorizationToken method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the GetAuthorizationTokenRequest method.
req, resp := client.GetAuthorizationTokenRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*ECR) GetDownloadUrlForLayer ¶

func (c *ECR) GetDownloadUrlForLayer(input *GetDownloadUrlForLayerInput) (*GetDownloadUrlForLayerOutput, error)

GetDownloadUrlForLayer API operation for Amazon EC2 Container Registry.

Retrieves the pre-signed Amazon S3 download URL corresponding to an image layer. You can only get URLs for image layers that are referenced in an image.

This operation is used by the Amazon ECR proxy, and it is not intended for general use by customers. Use the docker CLI to pull, tag, and push images.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Registry's API operation GetDownloadUrlForLayer for usage and error information.

Returned Error Codes:

• ServerException These errors are usually caused by a server-side issue.

• InvalidParameterException The specified parameter is invalid. Review the available parameters for the API request.

• LayersNotFoundException The specified layers could not be found, or the specified layer is not valid for this repository.

• LayerInaccessibleException The specified layer is not available because it is not associated with an image. Unassociated image layers may be cleaned up at any time.

• RepositoryNotFoundException The specified repository could not be found. Check the spelling of the specified repository and ensure that you are performing operations on the correct registry.

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ecr"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ecr.New(sess)

	params := &ecr.GetDownloadUrlForLayerInput{
		LayerDigest:    aws.String("LayerDigest"),    // Required
		RepositoryName: aws.String("RepositoryName"), // Required
		RegistryId:     aws.String("RegistryId"),
	}
	resp, err := svc.GetDownloadUrlForLayer(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ECR) GetDownloadUrlForLayerRequest ¶

func (c *ECR) GetDownloadUrlForLayerRequest(input *GetDownloadUrlForLayerInput) (req *request.Request, output *GetDownloadUrlForLayerOutput)

GetDownloadUrlForLayerRequest generates a "aws/request.Request" representing the client's request for the GetDownloadUrlForLayer operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See GetDownloadUrlForLayer for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetDownloadUrlForLayer method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the GetDownloadUrlForLayerRequest method.
req, resp := client.GetDownloadUrlForLayerRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*ECR) GetRepositoryPolicy ¶

func (c *ECR) GetRepositoryPolicy(input *GetRepositoryPolicyInput) (*GetRepositoryPolicyOutput, error)

GetRepositoryPolicy API operation for Amazon EC2 Container Registry.

Retrieves the repository policy for a specified repository.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Registry's API operation GetRepositoryPolicy for usage and error information.

Returned Error Codes:

• ServerException These errors are usually caused by a server-side issue.

• InvalidParameterException The specified parameter is invalid. Review the available parameters for the API request.

• RepositoryNotFoundException The specified repository could not be found. Check the spelling of the specified repository and ensure that you are performing operations on the correct registry.

• RepositoryPolicyNotFoundException The specified repository and registry combination does not have an associated repository policy.

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ecr"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ecr.New(sess)

	params := &ecr.GetRepositoryPolicyInput{
		RepositoryName: aws.String("RepositoryName"), // Required
		RegistryId:     aws.String("RegistryId"),
	}
	resp, err := svc.GetRepositoryPolicy(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ECR) GetRepositoryPolicyRequest ¶

func (c *ECR) GetRepositoryPolicyRequest(input *GetRepositoryPolicyInput) (req *request.Request, output *GetRepositoryPolicyOutput)

GetRepositoryPolicyRequest generates a "aws/request.Request" representing the client's request for the GetRepositoryPolicy operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See GetRepositoryPolicy for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetRepositoryPolicy method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the GetRepositoryPolicyRequest method.
req, resp := client.GetRepositoryPolicyRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*ECR) InitiateLayerUpload ¶

func (c *ECR) InitiateLayerUpload(input *InitiateLayerUploadInput) (*InitiateLayerUploadOutput, error)

InitiateLayerUpload API operation for Amazon EC2 Container Registry.

Notify Amazon ECR that you intend to upload an image layer.

This operation is used by the Amazon ECR proxy, and it is not intended for general use by customers. Use the docker CLI to pull, tag, and push images.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Registry's API operation InitiateLayerUpload for usage and error information.

Returned Error Codes:

• ServerException These errors are usually caused by a server-side issue.

• InvalidParameterException The specified parameter is invalid. Review the available parameters for the API request.

• RepositoryNotFoundException The specified repository could not be found. Check the spelling of the specified repository and ensure that you are performing operations on the correct registry.

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ecr"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ecr.New(sess)

	params := &ecr.InitiateLayerUploadInput{
		RepositoryName: aws.String("RepositoryName"), // Required
		RegistryId:     aws.String("RegistryId"),
	}
	resp, err := svc.InitiateLayerUpload(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ECR) InitiateLayerUploadRequest ¶

func (c *ECR) InitiateLayerUploadRequest(input *InitiateLayerUploadInput) (req *request.Request, output *InitiateLayerUploadOutput)

InitiateLayerUploadRequest generates a "aws/request.Request" representing the client's request for the InitiateLayerUpload operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See InitiateLayerUpload for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the InitiateLayerUpload method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the InitiateLayerUploadRequest method.
req, resp := client.InitiateLayerUploadRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*ECR) ListImages ¶

func (c *ECR) ListImages(input *ListImagesInput) (*ListImagesOutput, error)

ListImages API operation for Amazon EC2 Container Registry.

Lists all the image IDs for a given repository.

You can filter images based on whether or not they are tagged by setting the tagStatus parameter to TAGGED or UNTAGGED. For example, you can filter your results to return only UNTAGGED images and then pipe that result to a BatchDeleteImage operation to delete them. Or, you can filter your results to return only TAGGED images to list all of the tags in your repository.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Registry's API operation ListImages for usage and error information.

Returned Error Codes:

• ServerException These errors are usually caused by a server-side issue.

• InvalidParameterException The specified parameter is invalid. Review the available parameters for the API request.

• RepositoryNotFoundException The specified repository could not be found. Check the spelling of the specified repository and ensure that you are performing operations on the correct registry.

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ecr"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ecr.New(sess)

	params := &ecr.ListImagesInput{
		RepositoryName: aws.String("RepositoryName"), // Required
		Filter: &ecr.ListImagesFilter{
			TagStatus: aws.String("TagStatus"),
		},
		MaxResults: aws.Int64(1),
		NextToken:  aws.String("NextToken"),
		RegistryId: aws.String("RegistryId"),
	}
	resp, err := svc.ListImages(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ECR) ListImagesRequest ¶

func (c *ECR) ListImagesRequest(input *ListImagesInput) (req *request.Request, output *ListImagesOutput)

ListImagesRequest generates a "aws/request.Request" representing the client's request for the ListImages operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See ListImages for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListImages method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the ListImagesRequest method.
req, resp := client.ListImagesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*ECR) PutImage ¶

func (c *ECR) PutImage(input *PutImageInput) (*PutImageOutput, error)

PutImage API operation for Amazon EC2 Container Registry.

Creates or updates the image manifest associated with an image.

This operation is used by the Amazon ECR proxy, and it is not intended for general use by customers. Use the docker CLI to pull, tag, and push images.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Registry's API operation PutImage for usage and error information.

Returned Error Codes:

• ServerException These errors are usually caused by a server-side issue.

• InvalidParameterException The specified parameter is invalid. Review the available parameters for the API request.

• RepositoryNotFoundException The specified repository could not be found. Check the spelling of the specified repository and ensure that you are performing operations on the correct registry.

• ImageAlreadyExistsException The specified image has already been pushed, and there are no changes to the manifest or image tag since the last push.

• LayersNotFoundException The specified layers could not be found, or the specified layer is not valid for this repository.

• LimitExceededException The operation did not succeed because it would have exceeded a service limit for your account. For more information, see Amazon ECR Default Service Limits (http://docs.aws.amazon.com/AmazonECR/latest/userguide/service_limits.html) in the Amazon EC2 Container Registry User Guide.

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ecr"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ecr.New(sess)

	params := &ecr.PutImageInput{
		ImageManifest:  aws.String("ImageManifest"),  // Required
		RepositoryName: aws.String("RepositoryName"), // Required
		RegistryId:     aws.String("RegistryId"),
	}
	resp, err := svc.PutImage(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ECR) PutImageRequest ¶

func (c *ECR) PutImageRequest(input *PutImageInput) (req *request.Request, output *PutImageOutput)

PutImageRequest generates a "aws/request.Request" representing the client's request for the PutImage operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See PutImage for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the PutImage method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the PutImageRequest method.
req, resp := client.PutImageRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*ECR) SetRepositoryPolicy ¶

func (c *ECR) SetRepositoryPolicy(input *SetRepositoryPolicyInput) (*SetRepositoryPolicyOutput, error)

SetRepositoryPolicy API operation for Amazon EC2 Container Registry.

Applies a repository policy on a specified repository to control access permissions.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Registry's API operation SetRepositoryPolicy for usage and error information.

Returned Error Codes:

• ServerException These errors are usually caused by a server-side issue.

• InvalidParameterException The specified parameter is invalid. Review the available parameters for the API request.

• RepositoryNotFoundException The specified repository could not be found. Check the spelling of the specified repository and ensure that you are performing operations on the correct registry.

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ecr"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ecr.New(sess)

	params := &ecr.SetRepositoryPolicyInput{
		PolicyText:     aws.String("RepositoryPolicyText"), // Required
		RepositoryName: aws.String("RepositoryName"),       // Required
		Force:          aws.Bool(true),
		RegistryId:     aws.String("RegistryId"),
	}
	resp, err := svc.SetRepositoryPolicy(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ECR) SetRepositoryPolicyRequest ¶

func (c *ECR) SetRepositoryPolicyRequest(input *SetRepositoryPolicyInput) (req *request.Request, output *SetRepositoryPolicyOutput)

SetRepositoryPolicyRequest generates a "aws/request.Request" representing the client's request for the SetRepositoryPolicy operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See SetRepositoryPolicy for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the SetRepositoryPolicy method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the SetRepositoryPolicyRequest method.
req, resp := client.SetRepositoryPolicyRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*ECR) UploadLayerPart ¶

func (c *ECR) UploadLayerPart(input *UploadLayerPartInput) (*UploadLayerPartOutput, error)

UploadLayerPart API operation for Amazon EC2 Container Registry.

Uploads an image layer part to Amazon ECR.

This operation is used by the Amazon ECR proxy, and it is not intended for general use by customers. Use the docker CLI to pull, tag, and push images.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Registry's API operation UploadLayerPart for usage and error information.

Returned Error Codes:

• ServerException These errors are usually caused by a server-side issue.

• InvalidParameterException The specified parameter is invalid. Review the available parameters for the API request.

• InvalidLayerPartException The layer part size is not valid, or the first byte specified is not consecutive to the last byte of a previous layer part upload.

• RepositoryNotFoundException The specified repository could not be found. Check the spelling of the specified repository and ensure that you are performing operations on the correct registry.

• UploadNotFoundException The upload could not be found, or the specified upload id is not valid for this repository.

• LimitExceededException The operation did not succeed because it would have exceeded a service limit for your account. For more information, see Amazon ECR Default Service Limits (http://docs.aws.amazon.com/AmazonECR/latest/userguide/service_limits.html) in the Amazon EC2 Container Registry User Guide.

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/ecr"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := ecr.New(sess)

	params := &ecr.UploadLayerPartInput{
		LayerPartBlob:  []byte("PAYLOAD"),            // Required
		PartFirstByte:  aws.Int64(1),                 // Required
		PartLastByte:   aws.Int64(1),                 // Required
		RepositoryName: aws.String("RepositoryName"), // Required
		UploadId:       aws.String("UploadId"),       // Required
		RegistryId:     aws.String("RegistryId"),
	}
	resp, err := svc.UploadLayerPart(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

Output:

func (*ECR) UploadLayerPartRequest ¶

func (c *ECR) UploadLayerPartRequest(input *UploadLayerPartInput) (req *request.Request, output *UploadLayerPartOutput)

UploadLayerPartRequest generates a "aws/request.Request" representing the client's request for the UploadLayerPart operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See UploadLayerPart for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the UploadLayerPart method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the UploadLayerPartRequest method.
req, resp := client.UploadLayerPartRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (GetAuthorizationTokenInput) GoString ¶

func (s GetAuthorizationTokenInput) GoString() string

GoString returns the string representation

func (GetAuthorizationTokenInput) String ¶

func (s GetAuthorizationTokenInput) String() string

String returns the string representation

func (*GetAuthorizationTokenInput) Validate ¶

func (s *GetAuthorizationTokenInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

func (GetAuthorizationTokenOutput) GoString ¶

func (s GetAuthorizationTokenOutput) GoString() string

GoString returns the string representation

func (GetAuthorizationTokenOutput) String ¶

func (s GetAuthorizationTokenOutput) String() string

String returns the string representation

func (GetDownloadUrlForLayerInput) GoString ¶

func (s GetDownloadUrlForLayerInput) GoString() string

GoString returns the string representation

func (GetDownloadUrlForLayerInput) String ¶

func (s GetDownloadUrlForLayerInput) String() string

String returns the string representation

func (*GetDownloadUrlForLayerInput) Validate ¶

func (s *GetDownloadUrlForLayerInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

func (GetDownloadUrlForLayerOutput) GoString ¶

func (s GetDownloadUrlForLayerOutput) GoString() string

GoString returns the string representation

func (GetDownloadUrlForLayerOutput) String ¶

func (s GetDownloadUrlForLayerOutput) String() string

String returns the string representation

func (GetRepositoryPolicyInput) GoString ¶

func (s GetRepositoryPolicyInput) GoString() string

GoString returns the string representation

func (GetRepositoryPolicyInput) String ¶

func (s GetRepositoryPolicyInput) String() string

String returns the string representation

func (*GetRepositoryPolicyInput) Validate ¶

func (s *GetRepositoryPolicyInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

func (GetRepositoryPolicyOutput) GoString ¶

func (s GetRepositoryPolicyOutput) GoString() string

GoString returns the string representation

func (GetRepositoryPolicyOutput) String ¶

func (s GetRepositoryPolicyOutput) String() string

String returns the string representation

func (Image) GoString ¶

func (s Image) GoString() string

GoString returns the string representation

func (Image) String ¶

func (s Image) String() string

String returns the string representation

func (ImageDetail) GoString ¶

func (s ImageDetail) GoString() string

GoString returns the string representation

func (ImageDetail) String ¶

func (s ImageDetail) String() string

String returns the string representation

func (ImageFailure) GoString ¶

func (s ImageFailure) GoString() string

GoString returns the string representation

func (ImageFailure) String ¶

func (s ImageFailure) String() string

String returns the string representation

func (ImageIdentifier) GoString ¶

func (s ImageIdentifier) GoString() string

GoString returns the string representation

func (ImageIdentifier) String ¶

func (s ImageIdentifier) String() string

String returns the string representation

func (InitiateLayerUploadInput) GoString ¶

func (s InitiateLayerUploadInput) GoString() string

GoString returns the string representation

func (InitiateLayerUploadInput) String ¶

func (s InitiateLayerUploadInput) String() string

String returns the string representation

func (*InitiateLayerUploadInput) Validate ¶

func (s *InitiateLayerUploadInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

func (InitiateLayerUploadOutput) GoString ¶

func (s InitiateLayerUploadOutput) GoString() string

GoString returns the string representation

func (InitiateLayerUploadOutput) String ¶

func (s InitiateLayerUploadOutput) String() string

String returns the string representation

func (Layer) GoString ¶

func (s Layer) GoString() string

GoString returns the string representation

func (Layer) String ¶

func (s Layer) String() string

String returns the string representation

func (LayerFailure) GoString ¶

func (s LayerFailure) GoString() string

GoString returns the string representation

func (LayerFailure) String ¶

func (s LayerFailure) String() string

String returns the string representation

func (ListImagesFilter) GoString ¶

func (s ListImagesFilter) GoString() string

GoString returns the string representation

func (ListImagesFilter) String ¶

func (s ListImagesFilter) String() string

String returns the string representation

func (ListImagesInput) GoString ¶

func (s ListImagesInput) GoString() string

GoString returns the string representation

func (ListImagesInput) String ¶

func (s ListImagesInput) String() string

String returns the string representation

func (*ListImagesInput) Validate ¶

func (s *ListImagesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

func (ListImagesOutput) GoString ¶

func (s ListImagesOutput) GoString() string

GoString returns the string representation

func (ListImagesOutput) String ¶

func (s ListImagesOutput) String() string

String returns the string representation

func (PutImageInput) GoString ¶

func (s PutImageInput) GoString() string

GoString returns the string representation

func (PutImageInput) String ¶

func (s PutImageInput) String() string

String returns the string representation

func (*PutImageInput) Validate ¶

func (s *PutImageInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

func (PutImageOutput) GoString ¶

func (s PutImageOutput) GoString() string

GoString returns the string representation

func (PutImageOutput) String ¶

func (s PutImageOutput) String() string

String returns the string representation

func (Repository) GoString ¶

func (s Repository) GoString() string

GoString returns the string representation

func (Repository) String ¶

func (s Repository) String() string

String returns the string representation

func (SetRepositoryPolicyInput) GoString ¶

func (s SetRepositoryPolicyInput) GoString() string

GoString returns the string representation

func (SetRepositoryPolicyInput) String ¶

func (s SetRepositoryPolicyInput) String() string

String returns the string representation

func (*SetRepositoryPolicyInput) Validate ¶

func (s *SetRepositoryPolicyInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

func (SetRepositoryPolicyOutput) GoString ¶

func (s SetRepositoryPolicyOutput) GoString() string

GoString returns the string representation

func (SetRepositoryPolicyOutput) String ¶

func (s SetRepositoryPolicyOutput) String() string

String returns the string representation

func (UploadLayerPartInput) GoString ¶

func (s UploadLayerPartInput) GoString() string

GoString returns the string representation

func (UploadLayerPartInput) String ¶

func (s UploadLayerPartInput) String() string

String returns the string representation

func (*UploadLayerPartInput) Validate ¶

func (s *UploadLayerPartInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

func (UploadLayerPartOutput) GoString ¶

func (s UploadLayerPartOutput) GoString() string

GoString returns the string representation

func (UploadLayerPartOutput) String ¶

func (s UploadLayerPartOutput) String() string

String returns the string representation