opsworkscm

package
v1.5.14-0...-c50c370 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Dec 2, 2016 License: Apache-2.0 Imports: 7 Imported by: 0

Documentation

Overview

Package opsworkscm provides a client for AWS OpsWorks for Chef Automate.

Index

Examples

Constants

View Source
const (
	// BackupStatusInProgress is a BackupStatus enum value
	BackupStatusInProgress = "IN_PROGRESS"

	// BackupStatusOk is a BackupStatus enum value
	BackupStatusOk = "OK"

	// BackupStatusFailed is a BackupStatus enum value
	BackupStatusFailed = "FAILED"

	// BackupStatusDeleting is a BackupStatus enum value
	BackupStatusDeleting = "DELETING"
)
View Source
const (
	// BackupTypeAutomated is a BackupType enum value
	BackupTypeAutomated = "AUTOMATED"

	// BackupTypeManual is a BackupType enum value
	BackupTypeManual = "MANUAL"
)
View Source
const (
	// MaintenanceStatusSuccess is a MaintenanceStatus enum value
	MaintenanceStatusSuccess = "SUCCESS"

	// MaintenanceStatusFailed is a MaintenanceStatus enum value
	MaintenanceStatusFailed = "FAILED"
)
View Source
const (
	// NodeAssociationStatusSuccess is a NodeAssociationStatus enum value
	NodeAssociationStatusSuccess = "SUCCESS"

	// NodeAssociationStatusFailed is a NodeAssociationStatus enum value
	NodeAssociationStatusFailed = "FAILED"

	// NodeAssociationStatusInProgress is a NodeAssociationStatus enum value
	NodeAssociationStatusInProgress = "IN_PROGRESS"
)
View Source
const (
	// ServerStatusBackingUp is a ServerStatus enum value
	ServerStatusBackingUp = "BACKING_UP"

	// ServerStatusConnectionLost is a ServerStatus enum value
	ServerStatusConnectionLost = "CONNECTION_LOST"

	// ServerStatusCreating is a ServerStatus enum value
	ServerStatusCreating = "CREATING"

	// ServerStatusDeleting is a ServerStatus enum value
	ServerStatusDeleting = "DELETING"

	// ServerStatusModifying is a ServerStatus enum value
	ServerStatusModifying = "MODIFYING"

	// ServerStatusFailed is a ServerStatus enum value
	ServerStatusFailed = "FAILED"

	// ServerStatusHealthy is a ServerStatus enum value
	ServerStatusHealthy = "HEALTHY"

	// ServerStatusRunning is a ServerStatus enum value
	ServerStatusRunning = "RUNNING"

	// ServerStatusSetup is a ServerStatus enum value
	ServerStatusSetup = "SETUP"

	// ServerStatusUnderMaintenance is a ServerStatus enum value
	ServerStatusUnderMaintenance = "UNDER_MAINTENANCE"

	// ServerStatusUnhealthy is a ServerStatus enum value
	ServerStatusUnhealthy = "UNHEALTHY"
)
View Source
const ServiceName = "opsworks-cm"

A ServiceName is the name of the service the client will make API calls to.

Variables

This section is empty.

Functions

This section is empty.

Types

type AccountAttribute

type AccountAttribute struct {

	// The maximum allowed value.
	Maximum *int64 `type:"integer"`

	// The attribute name. The following are supported attribute names.
	//
	//    * ServerLimit: The number of servers that currently existing / maximal
	//    allowed. By default 10 servers can be created.
	//
	//    * ManualBackupLimit: The number of manual backups that currently exist
	//    / are maximal allowed. By default 50 manual backups can be created.
	Name *string `type:"string"`

	// The current usage, such as the current number of servers associated with
	// the account.
	Used *int64 `type:"integer"`
	// contains filtered or unexported fields
}

Stores account attributes.

func (AccountAttribute) GoString

func (s AccountAttribute) GoString() string

GoString returns the string representation

func (*AccountAttribute) SetMaximum

func (s *AccountAttribute) SetMaximum(v int64) *AccountAttribute

SetMaximum sets the Maximum field's value.

func (*AccountAttribute) SetName

func (s *AccountAttribute) SetName(v string) *AccountAttribute

SetName sets the Name field's value.

func (*AccountAttribute) SetUsed

func (s *AccountAttribute) SetUsed(v int64) *AccountAttribute

SetUsed sets the Used field's value.

func (AccountAttribute) String

func (s AccountAttribute) String() string

String returns the string representation

type AssociateNodeInput

type AssociateNodeInput struct {
	EngineAttributes []*EngineAttribute `type:"list"`

	// NodeName is a required field
	NodeName *string `type:"string" required:"true"`

	// ServerName is a required field
	ServerName *string `min:"1" type:"string" required:"true"`
	// contains filtered or unexported fields
}

func (AssociateNodeInput) GoString

func (s AssociateNodeInput) GoString() string

GoString returns the string representation

func (*AssociateNodeInput) SetEngineAttributes

func (s *AssociateNodeInput) SetEngineAttributes(v []*EngineAttribute) *AssociateNodeInput

SetEngineAttributes sets the EngineAttributes field's value.

func (*AssociateNodeInput) SetNodeName

func (s *AssociateNodeInput) SetNodeName(v string) *AssociateNodeInput

SetNodeName sets the NodeName field's value.

func (*AssociateNodeInput) SetServerName

func (s *AssociateNodeInput) SetServerName(v string) *AssociateNodeInput

SetServerName sets the ServerName field's value.

func (AssociateNodeInput) String

func (s AssociateNodeInput) String() string

String returns the string representation

func (*AssociateNodeInput) Validate

func (s *AssociateNodeInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AssociateNodeOutput

type AssociateNodeOutput struct {
	NodeAssociationStatusToken *string `type:"string"`
	// contains filtered or unexported fields
}

func (AssociateNodeOutput) GoString

func (s AssociateNodeOutput) GoString() string

GoString returns the string representation

func (*AssociateNodeOutput) SetNodeAssociationStatusToken

func (s *AssociateNodeOutput) SetNodeAssociationStatusToken(v string) *AssociateNodeOutput

SetNodeAssociationStatusToken sets the NodeAssociationStatusToken field's value.

func (AssociateNodeOutput) String

func (s AssociateNodeOutput) String() string

String returns the string representation

type Backup

type Backup struct {

	// The ARN of the backup.
	BackupArn *string `type:"string"`

	// The generated ID of the backup. Example: myServerName-yyyyMMddHHmmssSSS
	BackupId *string `type:"string"`

	// The backup type. Valid values are automated or manual.
	BackupType *string `type:"string" enum:"BackupType"`

	// The time stamp when the backup was created in the database. Example: 2016-07-29T13:38:47.520Z
	CreatedAt *time.Time `type:"timestamp" timestampFormat:"unix"`

	// A user-provided description for a manual backup. This field is empty for
	// automated backups.
	Description *string `type:"string"`

	// The engine type that is obtained from the server when the backup is created.
	Engine *string `type:"string"`

	// The engine model that is obtained from the server when the backup is created.
	EngineModel *string `type:"string"`

	// The engine version that is obtained from the server when the backup is created.
	EngineVersion *string `type:"string"`

	// The EC2 instance profile ARN that is obtained from the server when the backup
	// is created. Because this value is stored, you are not required to provide
	// the InstanceProfileArn again if you restore a backup.
	InstanceProfileArn *string `type:"string"`

	// The instance type that is obtained from the server when the backup is created.
	InstanceType *string `type:"string"`

	// The key pair that is obtained from the server when the backup is created.
	KeyPair *string `type:"string"`

	// The preferred backup period that is obtained from the server when the backup
	// is created.
	PreferredBackupWindow *string `type:"string"`

	// The preferred maintenance period that is obtained from the server when the
	// backup is created.
	PreferredMaintenanceWindow *string `type:"string"`

	// The size of the backup, in bytes. The size is returned by the instance in
	// the command results.
	S3DataSize *int64 `type:"integer"`

	// The Amazon S3 URL of the backup's tar.gz file.
	S3DataUrl *string `type:"string"`

	// The Amazon S3 URL of the backup's log file.
	S3LogUrl *string `type:"string"`

	// The security group IDs that are obtained from the server when the backup
	// is created.
	SecurityGroupIds []*string `type:"list"`

	// The name of the server from which the backup was made.
	ServerName *string `min:"1" type:"string"`

	// The service role ARN that is obtained from the server when the backup is
	// created.
	ServiceRoleArn *string `type:"string"`

	// The status of a backup while in progress.
	Status *string `type:"string" enum:"BackupStatus"`

	// An informational message about backup status.
	StatusDescription *string `type:"string"`

	// The subnet IDs that are obtained from the server when the backup is created.
	SubnetIds []*string `type:"list"`

	// The version of AWS OpsWorks for Chef Automate-specific tools that is obtained
	// from the server when the backup is created.
	ToolsVersion *string `type:"string"`

	// The IAM user ARN of the requester for manual backups. This field is empty
	// for automated backups.
	UserArn *string `type:"string"`
	// contains filtered or unexported fields
}

Describes a single backup.

func (Backup) GoString

func (s Backup) GoString() string

GoString returns the string representation

func (*Backup) SetBackupArn

func (s *Backup) SetBackupArn(v string) *Backup

SetBackupArn sets the BackupArn field's value.

func (*Backup) SetBackupId

func (s *Backup) SetBackupId(v string) *Backup

SetBackupId sets the BackupId field's value.

func (*Backup) SetBackupType

func (s *Backup) SetBackupType(v string) *Backup

SetBackupType sets the BackupType field's value.

func (*Backup) SetCreatedAt

func (s *Backup) SetCreatedAt(v time.Time) *Backup

SetCreatedAt sets the CreatedAt field's value.

func (*Backup) SetDescription

func (s *Backup) SetDescription(v string) *Backup

SetDescription sets the Description field's value.

func (*Backup) SetEngine

func (s *Backup) SetEngine(v string) *Backup

SetEngine sets the Engine field's value.

func (*Backup) SetEngineModel

func (s *Backup) SetEngineModel(v string) *Backup

SetEngineModel sets the EngineModel field's value.

func (*Backup) SetEngineVersion

func (s *Backup) SetEngineVersion(v string) *Backup

SetEngineVersion sets the EngineVersion field's value.

func (*Backup) SetInstanceProfileArn

func (s *Backup) SetInstanceProfileArn(v string) *Backup

SetInstanceProfileArn sets the InstanceProfileArn field's value.

func (*Backup) SetInstanceType

func (s *Backup) SetInstanceType(v string) *Backup

SetInstanceType sets the InstanceType field's value.

func (*Backup) SetKeyPair

func (s *Backup) SetKeyPair(v string) *Backup

SetKeyPair sets the KeyPair field's value.

func (*Backup) SetPreferredBackupWindow

func (s *Backup) SetPreferredBackupWindow(v string) *Backup

SetPreferredBackupWindow sets the PreferredBackupWindow field's value.

func (*Backup) SetPreferredMaintenanceWindow

func (s *Backup) SetPreferredMaintenanceWindow(v string) *Backup

SetPreferredMaintenanceWindow sets the PreferredMaintenanceWindow field's value.

func (*Backup) SetS3DataSize

func (s *Backup) SetS3DataSize(v int64) *Backup

SetS3DataSize sets the S3DataSize field's value.

func (*Backup) SetS3DataUrl

func (s *Backup) SetS3DataUrl(v string) *Backup

SetS3DataUrl sets the S3DataUrl field's value.

func (*Backup) SetS3LogUrl

func (s *Backup) SetS3LogUrl(v string) *Backup

SetS3LogUrl sets the S3LogUrl field's value.

func (*Backup) SetSecurityGroupIds

func (s *Backup) SetSecurityGroupIds(v []*string) *Backup

SetSecurityGroupIds sets the SecurityGroupIds field's value.

func (*Backup) SetServerName

func (s *Backup) SetServerName(v string) *Backup

SetServerName sets the ServerName field's value.

func (*Backup) SetServiceRoleArn

func (s *Backup) SetServiceRoleArn(v string) *Backup

SetServiceRoleArn sets the ServiceRoleArn field's value.

func (*Backup) SetStatus

func (s *Backup) SetStatus(v string) *Backup

SetStatus sets the Status field's value.

func (*Backup) SetStatusDescription

func (s *Backup) SetStatusDescription(v string) *Backup

SetStatusDescription sets the StatusDescription field's value.

func (*Backup) SetSubnetIds

func (s *Backup) SetSubnetIds(v []*string) *Backup

SetSubnetIds sets the SubnetIds field's value.

func (*Backup) SetToolsVersion

func (s *Backup) SetToolsVersion(v string) *Backup

SetToolsVersion sets the ToolsVersion field's value.

func (*Backup) SetUserArn

func (s *Backup) SetUserArn(v string) *Backup

SetUserArn sets the UserArn field's value.

func (Backup) String

func (s Backup) String() string

String returns the string representation

type CreateBackupInput

type CreateBackupInput struct {

	// A user-defined description of the backup.
	Description *string `type:"string"`

	// The name of the server that you want to back up.
	//
	// ServerName is a required field
	ServerName *string `min:"1" type:"string" required:"true"`
	// contains filtered or unexported fields
}

func (CreateBackupInput) GoString

func (s CreateBackupInput) GoString() string

GoString returns the string representation

func (*CreateBackupInput) SetDescription

func (s *CreateBackupInput) SetDescription(v string) *CreateBackupInput

SetDescription sets the Description field's value.

func (*CreateBackupInput) SetServerName

func (s *CreateBackupInput) SetServerName(v string) *CreateBackupInput

SetServerName sets the ServerName field's value.

func (CreateBackupInput) String

func (s CreateBackupInput) String() string

String returns the string representation

func (*CreateBackupInput) Validate

func (s *CreateBackupInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateBackupOutput

type CreateBackupOutput struct {

	// Backup created by request.
	Backup *Backup `type:"structure"`
	// contains filtered or unexported fields
}

func (CreateBackupOutput) GoString

func (s CreateBackupOutput) GoString() string

GoString returns the string representation

func (*CreateBackupOutput) SetBackup

func (s *CreateBackupOutput) SetBackup(v *Backup) *CreateBackupOutput

SetBackup sets the Backup field's value.

func (CreateBackupOutput) String

func (s CreateBackupOutput) String() string

String returns the string representation

type CreateServerInput

type CreateServerInput struct {

	// If you specify this field, AWS OpsWorks for Chef Automate creates the server
	// by using the backup represented by BackupId.
	BackupId *string `type:"string"`

	// The number of automated backups that you want to keep. Whenever a new backup
	// is created, AWS OpsWorks for Chef Automate deletes the oldest backups if
	// this number is exceeded. The default value is 1.
	BackupRetentionCount *int64 `min:"1" type:"integer"`

	// Enable or disable scheduled backups. Valid values are true or false. The
	// default value is true.
	DisableAutomatedBackup *bool `type:"boolean"`

	// The configuration management engine to use. Valid values include Chef.
	Engine *string `type:"string"`

	// Engine attributes on a specified server.
	//
	// Attributes accepted in a createServer request:
	//
	//    * CHEF_PIVOTAL_KEY: A base64-encoded RSA private key that is not stored
	//    by AWS OpsWorks for Chef Automate. This private key is required to access
	//    the Chef API.
	EngineAttributes []*EngineAttribute `type:"list"`

	// The engine model, or option. Valid values include Single.
	EngineModel *string `type:"string"`

	// The major release version of the engine that you want to use. Values depend
	// on the engine that you choose.
	EngineVersion *string `type:"string"`

	// The ARN of the instance profile that your Amazon EC2 instances use. Although
	// the AWS OpsWorks console typically creates the instance profile for you,
	// in this release of AWS OpsWorks for Chef Automate, run the service-role-creation.yaml
	// AWS CloudFormation template, located at https://s3.amazonaws.com/opsworks-stuff/latest/service-role-creation.yaml.
	// This template creates a stack that includes the instance profile you need.
	//
	// InstanceProfileArn is a required field
	InstanceProfileArn *string `type:"string" required:"true"`

	// The Amazon EC2 instance type to use. Valid values must be specified in the
	// following format: ^([cm][34]|t2).* For example, c3.large.
	InstanceType *string `type:"string"`

	// The Amazon EC2 key pair to set for the instance. You may specify this parameter
	// to connect to your instances by using SSH.
	KeyPair *string `type:"string"`

	// The start time for a one-hour period during which AWS OpsWorks for Chef Automate
	// backs up application-level data on your server if backups are enabled. Valid
	// values must be specified in one of the following formats:
	//
	//    * HH:MM for daily backups
	//
	//    * DDD:HH:MM for weekly backups
	//
	// The specified time is in coordinated universal time (UTC). The default value
	// is a random, daily start time.
	//
	// Example:08:00, which represents a daily start time of 08:00 UTC.
	//
	// Example:Mon:08:00, which represents a start time of every Monday at 08:00
	// UTC. (8:00 a.m.)
	PreferredBackupWindow *string `type:"string"`

	// The start time for a one-hour period each week during which AWS OpsWorks
	// for Chef Automate performs maintenance on the instance. Valid values must
	// be specified in the following format: DDD:HH:MM. The specified time is in
	// coordinated universal time (UTC). The default value is a random one-hour
	// period on Tuesday, Wednesday, or Friday. See TimeWindowDefinition for more
	// information.
	//
	// Example:Mon:08:00, which represents a start time of every Monday at 08:00
	// UTC. (8:00 a.m.)
	PreferredMaintenanceWindow *string `type:"string"`

	// A list of security group IDs to attach to the Amazon EC2 instance. If you
	// add this parameter, the specified security groups must be within the VPC
	// that is specified by SubnetIds.
	//
	// If you do not specify this parameter, AWS OpsWorks for Chef Automate creates
	// one new security group that uses TCP ports 22 and 443, open to 0.0.0.0/0
	// (everyone).
	SecurityGroupIds []*string `type:"list"`

	// The name of the server. The server name must be unique within your AWS account,
	// within each region. Server names must start with a letter; then letters,
	// numbers, or hyphens (-) are allowed, up to a maximum of 32 characters.
	//
	// ServerName is a required field
	ServerName *string `min:"1" type:"string" required:"true"`

	// The service role that the AWS OpsWorks for Chef Automate service backend
	// uses to work with your account. Although the AWS OpsWorks console typically
	// creates the service role for you, in this release of AWS OpsWorks for Chef
	// Automate, run the service-role-creation.yaml AWS CloudFormation template,
	// located at https://s3.amazonaws.com/opsworks-stuff/latest/service-role-creation.yaml.
	// This template creates a stack that includes the service role that you need.
	//
	// ServiceRoleArn is a required field
	ServiceRoleArn *string `type:"string" required:"true"`

	// The IDs of subnets in which to launch the server EC2 instance.
	//
	// Amazon EC2-Classic customers: This field is required. All servers must run
	// within a VPC. The VPC must have "Auto Assign Public IP" enabled.
	//
	// EC2-VPC customers: This field is optional. If you do not specify subnet IDs,
	// your EC2 instances are created in a default subnet that is selected by Amazon
	// EC2. If you specify subnet IDs, the VPC must have "Auto Assign Public IP"
	// enabled.
	//
	// For more information about supported Amazon EC2 platforms, see Supported
	// Platforms (http://docs.aws.amazon.com/https:/docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-supported-platforms.html).
	SubnetIds []*string `type:"list"`
	// contains filtered or unexported fields
}

func (CreateServerInput) GoString

func (s CreateServerInput) GoString() string

GoString returns the string representation

func (*CreateServerInput) SetBackupId

func (s *CreateServerInput) SetBackupId(v string) *CreateServerInput

SetBackupId sets the BackupId field's value.

func (*CreateServerInput) SetBackupRetentionCount

func (s *CreateServerInput) SetBackupRetentionCount(v int64) *CreateServerInput

SetBackupRetentionCount sets the BackupRetentionCount field's value.

func (*CreateServerInput) SetDisableAutomatedBackup

func (s *CreateServerInput) SetDisableAutomatedBackup(v bool) *CreateServerInput

SetDisableAutomatedBackup sets the DisableAutomatedBackup field's value.

func (*CreateServerInput) SetEngine

func (s *CreateServerInput) SetEngine(v string) *CreateServerInput

SetEngine sets the Engine field's value.

func (*CreateServerInput) SetEngineAttributes

func (s *CreateServerInput) SetEngineAttributes(v []*EngineAttribute) *CreateServerInput

SetEngineAttributes sets the EngineAttributes field's value.

func (*CreateServerInput) SetEngineModel

func (s *CreateServerInput) SetEngineModel(v string) *CreateServerInput

SetEngineModel sets the EngineModel field's value.

func (*CreateServerInput) SetEngineVersion

func (s *CreateServerInput) SetEngineVersion(v string) *CreateServerInput

SetEngineVersion sets the EngineVersion field's value.

func (*CreateServerInput) SetInstanceProfileArn

func (s *CreateServerInput) SetInstanceProfileArn(v string) *CreateServerInput

SetInstanceProfileArn sets the InstanceProfileArn field's value.

func (*CreateServerInput) SetInstanceType

func (s *CreateServerInput) SetInstanceType(v string) *CreateServerInput

SetInstanceType sets the InstanceType field's value.

func (*CreateServerInput) SetKeyPair

func (s *CreateServerInput) SetKeyPair(v string) *CreateServerInput

SetKeyPair sets the KeyPair field's value.

func (*CreateServerInput) SetPreferredBackupWindow

func (s *CreateServerInput) SetPreferredBackupWindow(v string) *CreateServerInput

SetPreferredBackupWindow sets the PreferredBackupWindow field's value.

func (*CreateServerInput) SetPreferredMaintenanceWindow

func (s *CreateServerInput) SetPreferredMaintenanceWindow(v string) *CreateServerInput

SetPreferredMaintenanceWindow sets the PreferredMaintenanceWindow field's value.

func (*CreateServerInput) SetSecurityGroupIds

func (s *CreateServerInput) SetSecurityGroupIds(v []*string) *CreateServerInput

SetSecurityGroupIds sets the SecurityGroupIds field's value.

func (*CreateServerInput) SetServerName

func (s *CreateServerInput) SetServerName(v string) *CreateServerInput

SetServerName sets the ServerName field's value.

func (*CreateServerInput) SetServiceRoleArn

func (s *CreateServerInput) SetServiceRoleArn(v string) *CreateServerInput

SetServiceRoleArn sets the ServiceRoleArn field's value.

func (*CreateServerInput) SetSubnetIds

func (s *CreateServerInput) SetSubnetIds(v []*string) *CreateServerInput

SetSubnetIds sets the SubnetIds field's value.

func (CreateServerInput) String

func (s CreateServerInput) String() string

String returns the string representation

func (*CreateServerInput) Validate

func (s *CreateServerInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateServerOutput

type CreateServerOutput struct {

	// The server that is created by the request.
	Server *Server `type:"structure"`
	// contains filtered or unexported fields
}

func (CreateServerOutput) GoString

func (s CreateServerOutput) GoString() string

GoString returns the string representation

func (*CreateServerOutput) SetServer

func (s *CreateServerOutput) SetServer(v *Server) *CreateServerOutput

SetServer sets the Server field's value.

func (CreateServerOutput) String

func (s CreateServerOutput) String() string

String returns the string representation

type DeleteBackupInput

type DeleteBackupInput struct {

	// The ID of the backup to delete. Run the DescribeBackups command to get a
	// list of backup IDs. Backup IDs are in the format ServerName-yyyyMMddHHmmssSSS.
	//
	// BackupId is a required field
	BackupId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

func (DeleteBackupInput) GoString

func (s DeleteBackupInput) GoString() string

GoString returns the string representation

func (*DeleteBackupInput) SetBackupId

func (s *DeleteBackupInput) SetBackupId(v string) *DeleteBackupInput

SetBackupId sets the BackupId field's value.

func (DeleteBackupInput) String

func (s DeleteBackupInput) String() string

String returns the string representation

func (*DeleteBackupInput) Validate

func (s *DeleteBackupInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteBackupOutput

type DeleteBackupOutput struct {
	// contains filtered or unexported fields
}

func (DeleteBackupOutput) GoString

func (s DeleteBackupOutput) GoString() string

GoString returns the string representation

func (DeleteBackupOutput) String

func (s DeleteBackupOutput) String() string

String returns the string representation

type DeleteServerInput

type DeleteServerInput struct {

	// The ID of the server to delete.
	//
	// ServerName is a required field
	ServerName *string `min:"1" type:"string" required:"true"`
	// contains filtered or unexported fields
}

func (DeleteServerInput) GoString

func (s DeleteServerInput) GoString() string

GoString returns the string representation

func (*DeleteServerInput) SetServerName

func (s *DeleteServerInput) SetServerName(v string) *DeleteServerInput

SetServerName sets the ServerName field's value.

func (DeleteServerInput) String

func (s DeleteServerInput) String() string

String returns the string representation

func (*DeleteServerInput) Validate

func (s *DeleteServerInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteServerOutput

type DeleteServerOutput struct {
	// contains filtered or unexported fields
}

func (DeleteServerOutput) GoString

func (s DeleteServerOutput) GoString() string

GoString returns the string representation

func (DeleteServerOutput) String

func (s DeleteServerOutput) String() string

String returns the string representation

type DescribeAccountAttributesInput

type DescribeAccountAttributesInput struct {
	// contains filtered or unexported fields
}

func (DescribeAccountAttributesInput) GoString

GoString returns the string representation

func (DescribeAccountAttributesInput) String

String returns the string representation

type DescribeAccountAttributesOutput

type DescribeAccountAttributesOutput struct {

	// The attributes that are currently set for the account.
	Attributes []*AccountAttribute `type:"list"`
	// contains filtered or unexported fields
}

func (DescribeAccountAttributesOutput) GoString

GoString returns the string representation

func (*DescribeAccountAttributesOutput) SetAttributes

SetAttributes sets the Attributes field's value.

func (DescribeAccountAttributesOutput) String

String returns the string representation

type DescribeBackupsInput

type DescribeBackupsInput struct {

	// Describes a single backup.
	BackupId *string `type:"string"`

	// To receive a paginated response, use this parameter to specify the maximum
	// number of results to be returned with a single call. If the number of available
	// results exceeds this maximum, the response includes a NextToken value that
	// you can assign to the NextToken request parameter to get the next set of
	// results.
	MaxResults *int64 `min:"1" type:"integer"`

	// NextToken is a string that is returned in some command responses. It indicates
	// that not all entries have been returned, and that you must run at least one
	// more request to get remaining items. To get remaining results, call DescribeBackups
	// again, and assign the token from the previous results as the value of the
	// nextToken parameter. If there are no more results, the response object's
	// nextToken parameter value is null. Setting a nextToken value that was not
	// returned in your previous results causes an InvalidNextTokenException to
	// occur.
	NextToken *string `type:"string"`

	// Returns backups for the server with the specified ServerName.
	ServerName *string `min:"1" type:"string"`
	// contains filtered or unexported fields
}

func (DescribeBackupsInput) GoString

func (s DescribeBackupsInput) GoString() string

GoString returns the string representation

func (*DescribeBackupsInput) SetBackupId

SetBackupId sets the BackupId field's value.

func (*DescribeBackupsInput) SetMaxResults

func (s *DescribeBackupsInput) SetMaxResults(v int64) *DescribeBackupsInput

SetMaxResults sets the MaxResults field's value.

func (*DescribeBackupsInput) SetNextToken

func (s *DescribeBackupsInput) SetNextToken(v string) *DescribeBackupsInput

SetNextToken sets the NextToken field's value.

func (*DescribeBackupsInput) SetServerName

func (s *DescribeBackupsInput) SetServerName(v string) *DescribeBackupsInput

SetServerName sets the ServerName field's value.

func (DescribeBackupsInput) String

func (s DescribeBackupsInput) String() string

String returns the string representation

func (*DescribeBackupsInput) Validate

func (s *DescribeBackupsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeBackupsOutput

type DescribeBackupsOutput struct {

	// Contains the response to a DescribeBackups request.
	Backups []*Backup `type:"list"`

	// NextToken is a string that is returned in some command responses. It indicates
	// that not all entries have been returned, and that you must run at least one
	// more request to get remaining items. To get remaining results, call DescribeBackups
	// again, and assign the token from the previous results as the value of the
	// nextToken parameter. If there are no more results, the response object's
	// nextToken parameter value is null. Setting a nextToken value that was not
	// returned in your previous results causes an InvalidNextTokenException to
	// occur.
	NextToken *string `type:"string"`
	// contains filtered or unexported fields
}

func (DescribeBackupsOutput) GoString

func (s DescribeBackupsOutput) GoString() string

GoString returns the string representation

func (*DescribeBackupsOutput) SetBackups

func (s *DescribeBackupsOutput) SetBackups(v []*Backup) *DescribeBackupsOutput

SetBackups sets the Backups field's value.

func (*DescribeBackupsOutput) SetNextToken

SetNextToken sets the NextToken field's value.

func (DescribeBackupsOutput) String

func (s DescribeBackupsOutput) String() string

String returns the string representation

type DescribeEventsInput

type DescribeEventsInput struct {

	// To receive a paginated response, use this parameter to specify the maximum
	// number of results to be returned with a single call. If the number of available
	// results exceeds this maximum, the response includes a NextToken value that
	// you can assign to the NextToken request parameter to get the next set of
	// results.
	MaxResults *int64 `min:"1" type:"integer"`

	// NextToken is a string that is returned in some command responses. It indicates
	// that not all entries have been returned, and that you must run at least one
	// more request to get remaining items. To get remaining results, call DescribeEvents
	// again, and assign the token from the previous results as the value of the
	// nextToken parameter. If there are no more results, the response object's
	// nextToken parameter value is null. Setting a nextToken value that was not
	// returned in your previous results causes an InvalidNextTokenException to
	// occur.
	NextToken *string `type:"string"`

	// The name of the server for which you want to view events.
	//
	// ServerName is a required field
	ServerName *string `min:"1" type:"string" required:"true"`
	// contains filtered or unexported fields
}

func (DescribeEventsInput) GoString

func (s DescribeEventsInput) GoString() string

GoString returns the string representation

func (*DescribeEventsInput) SetMaxResults

func (s *DescribeEventsInput) SetMaxResults(v int64) *DescribeEventsInput

SetMaxResults sets the MaxResults field's value.

func (*DescribeEventsInput) SetNextToken

func (s *DescribeEventsInput) SetNextToken(v string) *DescribeEventsInput

SetNextToken sets the NextToken field's value.

func (*DescribeEventsInput) SetServerName

func (s *DescribeEventsInput) SetServerName(v string) *DescribeEventsInput

SetServerName sets the ServerName field's value.

func (DescribeEventsInput) String

func (s DescribeEventsInput) String() string

String returns the string representation

func (*DescribeEventsInput) Validate

func (s *DescribeEventsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeEventsOutput

type DescribeEventsOutput struct {

	// NextToken is a string that is returned in some command responses. It indicates
	// that not all entries have been returned, and that you must run at least one
	// more request to get remaining items. To get remaining results, call DescribeEvents
	// again, and assign the token from the previous results as the value of the
	// nextToken parameter. If there are no more results, the response object's
	// nextToken parameter value is null. Setting a nextToken value that was not
	// returned in your previous results causes an InvalidNextTokenException to
	// occur.
	NextToken *string `type:"string"`

	// Contains the response to a DescribeEvents request.
	ServerEvents []*ServerEvent `type:"list"`
	// contains filtered or unexported fields
}

func (DescribeEventsOutput) GoString

func (s DescribeEventsOutput) GoString() string

GoString returns the string representation

func (*DescribeEventsOutput) SetNextToken

func (s *DescribeEventsOutput) SetNextToken(v string) *DescribeEventsOutput

SetNextToken sets the NextToken field's value.

func (*DescribeEventsOutput) SetServerEvents

func (s *DescribeEventsOutput) SetServerEvents(v []*ServerEvent) *DescribeEventsOutput

SetServerEvents sets the ServerEvents field's value.

func (DescribeEventsOutput) String

func (s DescribeEventsOutput) String() string

String returns the string representation

type DescribeNodeAssociationStatusInput

type DescribeNodeAssociationStatusInput struct {

	// NodeAssociationStatusToken is a required field
	NodeAssociationStatusToken *string `type:"string" required:"true"`

	// ServerName is a required field
	ServerName *string `min:"1" type:"string" required:"true"`
	// contains filtered or unexported fields
}

func (DescribeNodeAssociationStatusInput) GoString

GoString returns the string representation

func (*DescribeNodeAssociationStatusInput) SetNodeAssociationStatusToken

SetNodeAssociationStatusToken sets the NodeAssociationStatusToken field's value.

func (*DescribeNodeAssociationStatusInput) SetServerName

SetServerName sets the ServerName field's value.

func (DescribeNodeAssociationStatusInput) String

String returns the string representation

func (*DescribeNodeAssociationStatusInput) Validate

Validate inspects the fields of the type to determine if they are valid.

type DescribeNodeAssociationStatusOutput

type DescribeNodeAssociationStatusOutput struct {
	NodeAssociationStatus *string `type:"string" enum:"NodeAssociationStatus"`
	// contains filtered or unexported fields
}

func (DescribeNodeAssociationStatusOutput) GoString

GoString returns the string representation

func (*DescribeNodeAssociationStatusOutput) SetNodeAssociationStatus

SetNodeAssociationStatus sets the NodeAssociationStatus field's value.

func (DescribeNodeAssociationStatusOutput) String

String returns the string representation

type DescribeServersInput

type DescribeServersInput struct {

	// To receive a paginated response, use this parameter to specify the maximum
	// number of results to be returned with a single call. If the number of available
	// results exceeds this maximum, the response includes a NextToken value that
	// you can assign to the NextToken request parameter to get the next set of
	// results.
	MaxResults *int64 `min:"1" type:"integer"`

	// NextToken is a string that is returned in some command responses. It indicates
	// that not all entries have been returned, and that you must run at least one
	// more request to get remaining items. To get remaining results, call DescribeServers
	// again, and assign the token from the previous results as the value of the
	// nextToken parameter. If there are no more results, the response object's
	// nextToken parameter value is null. Setting a nextToken value that was not
	// returned in your previous results causes an InvalidNextTokenException to
	// occur.
	NextToken *string `type:"string"`

	// Describes the server with the specified ServerName.
	ServerName *string `min:"1" type:"string"`
	// contains filtered or unexported fields
}

func (DescribeServersInput) GoString

func (s DescribeServersInput) GoString() string

GoString returns the string representation

func (*DescribeServersInput) SetMaxResults

func (s *DescribeServersInput) SetMaxResults(v int64) *DescribeServersInput

SetMaxResults sets the MaxResults field's value.

func (*DescribeServersInput) SetNextToken

func (s *DescribeServersInput) SetNextToken(v string) *DescribeServersInput

SetNextToken sets the NextToken field's value.

func (*DescribeServersInput) SetServerName

func (s *DescribeServersInput) SetServerName(v string) *DescribeServersInput

SetServerName sets the ServerName field's value.

func (DescribeServersInput) String

func (s DescribeServersInput) String() string

String returns the string representation

func (*DescribeServersInput) Validate

func (s *DescribeServersInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeServersOutput

type DescribeServersOutput struct {

	// NextToken is a string that is returned in some command responses. It indicates
	// that not all entries have been returned, and that you must run at least one
	// more request to get remaining items. To get remaining results, call DescribeServers
	// again, and assign the token from the previous results as the value of the
	// nextToken parameter. If there are no more results, the response object's
	// nextToken parameter value is null. Setting a nextToken value that was not
	// returned in your previous results causes an InvalidNextTokenException to
	// occur.
	NextToken *string `type:"string"`

	// Contains the response to a DescribeServers request.
	Servers []*Server `type:"list"`
	// contains filtered or unexported fields
}

func (DescribeServersOutput) GoString

func (s DescribeServersOutput) GoString() string

GoString returns the string representation

func (*DescribeServersOutput) SetNextToken

SetNextToken sets the NextToken field's value.

func (*DescribeServersOutput) SetServers

func (s *DescribeServersOutput) SetServers(v []*Server) *DescribeServersOutput

SetServers sets the Servers field's value.

func (DescribeServersOutput) String

func (s DescribeServersOutput) String() string

String returns the string representation

type DisassociateNodeInput

type DisassociateNodeInput struct {
	EngineAttributes []*EngineAttribute `type:"list"`

	// NodeName is a required field
	NodeName *string `type:"string" required:"true"`

	// ServerName is a required field
	ServerName *string `min:"1" type:"string" required:"true"`
	// contains filtered or unexported fields
}

func (DisassociateNodeInput) GoString

func (s DisassociateNodeInput) GoString() string

GoString returns the string representation

func (*DisassociateNodeInput) SetEngineAttributes

func (s *DisassociateNodeInput) SetEngineAttributes(v []*EngineAttribute) *DisassociateNodeInput

SetEngineAttributes sets the EngineAttributes field's value.

func (*DisassociateNodeInput) SetNodeName

SetNodeName sets the NodeName field's value.

func (*DisassociateNodeInput) SetServerName

func (s *DisassociateNodeInput) SetServerName(v string) *DisassociateNodeInput

SetServerName sets the ServerName field's value.

func (DisassociateNodeInput) String

func (s DisassociateNodeInput) String() string

String returns the string representation

func (*DisassociateNodeInput) Validate

func (s *DisassociateNodeInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DisassociateNodeOutput

type DisassociateNodeOutput struct {
	NodeAssociationStatusToken *string `type:"string"`
	// contains filtered or unexported fields
}

func (DisassociateNodeOutput) GoString

func (s DisassociateNodeOutput) GoString() string

GoString returns the string representation

func (*DisassociateNodeOutput) SetNodeAssociationStatusToken

func (s *DisassociateNodeOutput) SetNodeAssociationStatusToken(v string) *DisassociateNodeOutput

SetNodeAssociationStatusToken sets the NodeAssociationStatusToken field's value.

func (DisassociateNodeOutput) String

func (s DisassociateNodeOutput) String() string

String returns the string representation

type EngineAttribute

type EngineAttribute struct {

	// The name of the engine attribute.
	Name *string `type:"string"`

	// The value of the engine attribute.
	Value *string `type:"string"`
	// contains filtered or unexported fields
}

A name/value pair that is specific to the engine of the server.

func (EngineAttribute) GoString

func (s EngineAttribute) GoString() string

GoString returns the string representation

func (*EngineAttribute) SetName

func (s *EngineAttribute) SetName(v string) *EngineAttribute

SetName sets the Name field's value.

func (*EngineAttribute) SetValue

func (s *EngineAttribute) SetValue(v string) *EngineAttribute

SetValue sets the Value field's value.

func (EngineAttribute) String

func (s EngineAttribute) String() string

String returns the string representation

type OpsWorksCM

type OpsWorksCM struct {
	*client.Client
}

A service that runs and manages configuration management servers.

Glossary of terms

  • Server: A server is a configuration management server, and can be highly-available. The configuration manager runs on your instances by using various AWS services, such as Amazon Elastic Compute Cloud (EC2), and potentially Amazon Relational Database Service (RDS). A server is a generic abstraction over the configuration manager that you want to use, much like Amazon RDS. In AWS OpsWorks for Chef Automate, you do not start or stop servers. After you create servers, they continue to run until they are deleted.

  • Engine: The specific configuration manager that you want to use (such as Chef) is the engine.

  • Backup: This is an application-level backup of the data that the configuration manager stores. A backup creates a .tar.gz file that is stored in an Amazon Simple Storage Service (S3) bucket in your account. AWS OpsWorks for Chef Automate creates the S3 bucket when you launch the first instance. A backup maintains a snapshot of all of a server's important attributes at the time of the backup.

  • Events: Events are always related to a server. Events are written during server creation, when health checks run, when backups are created, etc. When you delete a server, the server's events are also deleted.

  • AccountAttributes: Every account has attributes that are assigned in the AWS OpsWorks for Chef Automate database. These attributes store information about configuration limits (servers, backups, etc.) and your customer account.

Throttling limits

All API operations allow for 5 requests per second with a burst of 10 requests per second. The service client's operations are safe to be used concurrently. It is not safe to mutate any of the client's properties though.

func New

func New(p client.ConfigProvider, cfgs ...*aws.Config) *OpsWorksCM

New creates a new instance of the OpsWorksCM client with a session. If additional configuration is needed for the client instance use the optional aws.Config parameter to add your extra config.

Example:

// Create a OpsWorksCM client from just a session.
svc := opsworkscm.New(mySession)

// Create a OpsWorksCM client with additional configuration
svc := opsworkscm.New(mySession, aws.NewConfig().WithRegion("us-west-2"))

func (*OpsWorksCM) AssociateNode

func (c *OpsWorksCM) AssociateNode(input *AssociateNodeInput) (*AssociateNodeOutput, error)

AssociateNode API operation for AWS OpsWorks for Chef Automate.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS OpsWorks for Chef Automate's API operation AssociateNode for usage and error information.

Returned Error Codes:

  • InvalidStateException The resource is in a state that does not allow you to perform a specified action.

  • ResourceNotFoundException The requested resource does not exist, or access was denied.

  • ValidationException One or more of the provided request parameters are not valid.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/opsworkscm"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := opsworkscm.New(sess)

	params := &opsworkscm.AssociateNodeInput{
		NodeName:   aws.String("NodeName"),   // Required
		ServerName: aws.String("ServerName"), // Required
		EngineAttributes: []*opsworkscm.EngineAttribute{
			{ // Required
				Name:  aws.String("String"),
				Value: aws.String("String"),
			},
			// More values...
		},
	}
	resp, err := svc.AssociateNode(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*OpsWorksCM) AssociateNodeRequest

func (c *OpsWorksCM) AssociateNodeRequest(input *AssociateNodeInput) (req *request.Request, output *AssociateNodeOutput)

AssociateNodeRequest generates a "aws/request.Request" representing the client's request for the AssociateNode operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See AssociateNode for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the AssociateNode method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the AssociateNodeRequest method.
req, resp := client.AssociateNodeRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*OpsWorksCM) CreateBackup

func (c *OpsWorksCM) CreateBackup(input *CreateBackupInput) (*CreateBackupOutput, error)

CreateBackup API operation for AWS OpsWorks for Chef Automate.

Creates an application-level backup of a server. While the server is BACKING_UP, the server can not be modified and no additional backup can be created.

Backups can be created for RUNNING, HEALTHY and UNHEALTHY servers.

This operation is asnychronous.

By default 50 manual backups can be created.

A LimitExceededException is thrown then the maximum number of manual backup is reached. A InvalidStateException is thrown when the server is not in any of RUNNING, HEALTHY, UNHEALTHY. A ResourceNotFoundException is thrown when the server is not found. A ValidationException is thrown when parameters of the request are not valid.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS OpsWorks for Chef Automate's API operation CreateBackup for usage and error information.

Returned Error Codes:

  • InvalidStateException The resource is in a state that does not allow you to perform a specified action.

  • LimitExceededException The limit of servers or backups has been reached.

  • ResourceNotFoundException The requested resource does not exist, or access was denied.

  • ValidationException One or more of the provided request parameters are not valid.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/opsworkscm"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := opsworkscm.New(sess)

	params := &opsworkscm.CreateBackupInput{
		ServerName:  aws.String("ServerName"), // Required
		Description: aws.String("String"),
	}
	resp, err := svc.CreateBackup(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*OpsWorksCM) CreateBackupRequest

func (c *OpsWorksCM) CreateBackupRequest(input *CreateBackupInput) (req *request.Request, output *CreateBackupOutput)

CreateBackupRequest generates a "aws/request.Request" representing the client's request for the CreateBackup operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See CreateBackup for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateBackup method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the CreateBackupRequest method.
req, resp := client.CreateBackupRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*OpsWorksCM) CreateServer

func (c *OpsWorksCM) CreateServer(input *CreateServerInput) (*CreateServerOutput, error)

CreateServer API operation for AWS OpsWorks for Chef Automate.

Creates and immedately starts a new Server. The server can be used once it has reached the HEALTHY state.

This operation is asnychronous.

A LimitExceededException is thrown then the maximum number of server backup is reached. A ResourceAlreadyExistsException is raise when a server with the same name already exists in the account. A ResourceNotFoundException is thrown when a backupId is passed, but the backup does not exist. A ValidationException is thrown when parameters of the request are not valid.

By default 10 servers can be created. A LimitExceededException is raised when the limit is exceeded.

When no security groups are provided by using SecurityGroupIds, AWS OpsWorks creates a new security group. This security group opens the Chef server to the world on TCP port 443. If a KeyName is present, SSH access is enabled. SSH is also open to the world on TCP port 22.

By default, the Chef Server is accessible from any IP address. We recommend that you update your security group rules to allow access from known IP addresses and address ranges only. To edit security group rules, open Security Groups in the navigation pane of the EC2 management console.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS OpsWorks for Chef Automate's API operation CreateServer for usage and error information.

Returned Error Codes:

  • LimitExceededException The limit of servers or backups has been reached.

  • ResourceAlreadyExistsException The requested resource cannot be created because it already exists.

  • ResourceNotFoundException The requested resource does not exist, or access was denied.

  • ValidationException One or more of the provided request parameters are not valid.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/opsworkscm"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := opsworkscm.New(sess)

	params := &opsworkscm.CreateServerInput{
		InstanceProfileArn:     aws.String("InstanceProfileArn"), // Required
		ServerName:             aws.String("ServerName"),         // Required
		ServiceRoleArn:         aws.String("ServiceRoleArn"),     // Required
		BackupId:               aws.String("BackupId"),
		BackupRetentionCount:   aws.Int64(1),
		DisableAutomatedBackup: aws.Bool(true),
		Engine:                 aws.String("String"),
		EngineAttributes: []*opsworkscm.EngineAttribute{
			{ // Required
				Name:  aws.String("String"),
				Value: aws.String("String"),
			},
			// More values...
		},
		EngineModel:                aws.String("String"),
		EngineVersion:              aws.String("String"),
		InstanceType:               aws.String("String"),
		KeyPair:                    aws.String("KeyPair"),
		PreferredBackupWindow:      aws.String("TimeWindowDefinition"),
		PreferredMaintenanceWindow: aws.String("TimeWindowDefinition"),
		SecurityGroupIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
		SubnetIds: []*string{
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.CreateServer(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*OpsWorksCM) CreateServerRequest

func (c *OpsWorksCM) CreateServerRequest(input *CreateServerInput) (req *request.Request, output *CreateServerOutput)

CreateServerRequest generates a "aws/request.Request" representing the client's request for the CreateServer operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See CreateServer for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateServer method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the CreateServerRequest method.
req, resp := client.CreateServerRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*OpsWorksCM) DeleteBackup

func (c *OpsWorksCM) DeleteBackup(input *DeleteBackupInput) (*DeleteBackupOutput, error)

DeleteBackup API operation for AWS OpsWorks for Chef Automate.

Deletes a backup. You can delete both manual and automated backups.

This operation is asynchronous.

A InvalidStateException is thrown then a backup is already deleting. A ResourceNotFoundException is thrown when the backup does not exist. A ValidationException is thrown when parameters of the request are not valid.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS OpsWorks for Chef Automate's API operation DeleteBackup for usage and error information.

Returned Error Codes:

  • InvalidStateException The resource is in a state that does not allow you to perform a specified action.

  • ResourceNotFoundException The requested resource does not exist, or access was denied.

  • ValidationException One or more of the provided request parameters are not valid.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/opsworkscm"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := opsworkscm.New(sess)

	params := &opsworkscm.DeleteBackupInput{
		BackupId: aws.String("BackupId"), // Required
	}
	resp, err := svc.DeleteBackup(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*OpsWorksCM) DeleteBackupRequest

func (c *OpsWorksCM) DeleteBackupRequest(input *DeleteBackupInput) (req *request.Request, output *DeleteBackupOutput)

DeleteBackupRequest generates a "aws/request.Request" representing the client's request for the DeleteBackup operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DeleteBackup for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteBackup method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DeleteBackupRequest method.
req, resp := client.DeleteBackupRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*OpsWorksCM) DeleteServer

func (c *OpsWorksCM) DeleteServer(input *DeleteServerInput) (*DeleteServerOutput, error)

DeleteServer API operation for AWS OpsWorks for Chef Automate.

Deletes the server and the underlying AWS CloudFormation stack (including the server's EC2 instance). The server status updated to DELETING. Once the server is successfully deleted, it will no longer be returned by DescribeServer requests. If the AWS CloudFormation stack cannot be deleted, the server cannot be deleted.

This operation is asynchronous.

A InvalidStateException is thrown then a server is already deleting. A ResourceNotFoundException is thrown when the server does not exist. A ValidationException is raised when parameters of the request are invalid.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS OpsWorks for Chef Automate's API operation DeleteServer for usage and error information.

Returned Error Codes:

  • InvalidStateException The resource is in a state that does not allow you to perform a specified action.

  • ResourceNotFoundException The requested resource does not exist, or access was denied.

  • ValidationException One or more of the provided request parameters are not valid.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/opsworkscm"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := opsworkscm.New(sess)

	params := &opsworkscm.DeleteServerInput{
		ServerName: aws.String("ServerName"), // Required
	}
	resp, err := svc.DeleteServer(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*OpsWorksCM) DeleteServerRequest

func (c *OpsWorksCM) DeleteServerRequest(input *DeleteServerInput) (req *request.Request, output *DeleteServerOutput)

DeleteServerRequest generates a "aws/request.Request" representing the client's request for the DeleteServer operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DeleteServer for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteServer method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DeleteServerRequest method.
req, resp := client.DeleteServerRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*OpsWorksCM) DescribeAccountAttributes

func (c *OpsWorksCM) DescribeAccountAttributes(input *DescribeAccountAttributesInput) (*DescribeAccountAttributesOutput, error)

DescribeAccountAttributes API operation for AWS OpsWorks for Chef Automate.

Describes your account attributes, and creates requests to increase limits before they are reached or exceeded.

This operation is synchronous.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS OpsWorks for Chef Automate's API operation DescribeAccountAttributes for usage and error information.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/opsworkscm"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := opsworkscm.New(sess)

	var params *opsworkscm.DescribeAccountAttributesInput
	resp, err := svc.DescribeAccountAttributes(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*OpsWorksCM) DescribeAccountAttributesRequest

func (c *OpsWorksCM) DescribeAccountAttributesRequest(input *DescribeAccountAttributesInput) (req *request.Request, output *DescribeAccountAttributesOutput)

DescribeAccountAttributesRequest generates a "aws/request.Request" representing the client's request for the DescribeAccountAttributes operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeAccountAttributes for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeAccountAttributes method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeAccountAttributesRequest method.
req, resp := client.DescribeAccountAttributesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*OpsWorksCM) DescribeBackups

func (c *OpsWorksCM) DescribeBackups(input *DescribeBackupsInput) (*DescribeBackupsOutput, error)

DescribeBackups API operation for AWS OpsWorks for Chef Automate.

Describes backups. The results are ordered by time, with newest backups first. If you do not specify a BackupId or ServerName, the command returns all backups.

This operation is synchronous.

A ResourceNotFoundException is thrown when the backup does not exist. A ValidationException is raised when parameters of the request are invalid.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS OpsWorks for Chef Automate's API operation DescribeBackups for usage and error information.

Returned Error Codes:

  • ValidationException One or more of the provided request parameters are not valid.

  • ResourceNotFoundException The requested resource does not exist, or access was denied.

  • InvalidNextTokenException This occurs when the provided nextToken is not valid.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/opsworkscm"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := opsworkscm.New(sess)

	params := &opsworkscm.DescribeBackupsInput{
		BackupId:   aws.String("BackupId"),
		MaxResults: aws.Int64(1),
		NextToken:  aws.String("NextToken"),
		ServerName: aws.String("ServerName"),
	}
	resp, err := svc.DescribeBackups(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*OpsWorksCM) DescribeBackupsRequest

func (c *OpsWorksCM) DescribeBackupsRequest(input *DescribeBackupsInput) (req *request.Request, output *DescribeBackupsOutput)

DescribeBackupsRequest generates a "aws/request.Request" representing the client's request for the DescribeBackups operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeBackups for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeBackups method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeBackupsRequest method.
req, resp := client.DescribeBackupsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*OpsWorksCM) DescribeEvents

func (c *OpsWorksCM) DescribeEvents(input *DescribeEventsInput) (*DescribeEventsOutput, error)

DescribeEvents API operation for AWS OpsWorks for Chef Automate.

Describes events for a specified server. Results are ordered by time, with newest events first.

This operation is synchronous.

A ResourceNotFoundException is thrown when the server does not exist. A ValidationException is raised when parameters of the request are invalid.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS OpsWorks for Chef Automate's API operation DescribeEvents for usage and error information.

Returned Error Codes:

  • ValidationException One or more of the provided request parameters are not valid.

  • InvalidNextTokenException This occurs when the provided nextToken is not valid.

  • ResourceNotFoundException The requested resource does not exist, or access was denied.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/opsworkscm"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := opsworkscm.New(sess)

	params := &opsworkscm.DescribeEventsInput{
		ServerName: aws.String("ServerName"), // Required
		MaxResults: aws.Int64(1),
		NextToken:  aws.String("NextToken"),
	}
	resp, err := svc.DescribeEvents(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*OpsWorksCM) DescribeEventsRequest

func (c *OpsWorksCM) DescribeEventsRequest(input *DescribeEventsInput) (req *request.Request, output *DescribeEventsOutput)

DescribeEventsRequest generates a "aws/request.Request" representing the client's request for the DescribeEvents operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeEvents for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeEvents method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeEventsRequest method.
req, resp := client.DescribeEventsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*OpsWorksCM) DescribeNodeAssociationStatus

func (c *OpsWorksCM) DescribeNodeAssociationStatus(input *DescribeNodeAssociationStatusInput) (*DescribeNodeAssociationStatusOutput, error)

DescribeNodeAssociationStatus API operation for AWS OpsWorks for Chef Automate.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS OpsWorks for Chef Automate's API operation DescribeNodeAssociationStatus for usage and error information.

Returned Error Codes:

  • ResourceNotFoundException The requested resource does not exist, or access was denied.

  • ValidationException One or more of the provided request parameters are not valid.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/opsworkscm"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := opsworkscm.New(sess)

	params := &opsworkscm.DescribeNodeAssociationStatusInput{
		NodeAssociationStatusToken: aws.String("NodeAssociationStatusToken"), // Required
		ServerName:                 aws.String("ServerName"),                 // Required
	}
	resp, err := svc.DescribeNodeAssociationStatus(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*OpsWorksCM) DescribeNodeAssociationStatusRequest

func (c *OpsWorksCM) DescribeNodeAssociationStatusRequest(input *DescribeNodeAssociationStatusInput) (req *request.Request, output *DescribeNodeAssociationStatusOutput)

DescribeNodeAssociationStatusRequest generates a "aws/request.Request" representing the client's request for the DescribeNodeAssociationStatus operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeNodeAssociationStatus for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeNodeAssociationStatus method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeNodeAssociationStatusRequest method.
req, resp := client.DescribeNodeAssociationStatusRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*OpsWorksCM) DescribeServers

func (c *OpsWorksCM) DescribeServers(input *DescribeServersInput) (*DescribeServersOutput, error)

DescribeServers API operation for AWS OpsWorks for Chef Automate.

Lists all configuration management servers that are identified with your account. Only the stored results from Amazon DynamoDB are returned. AWS OpsWorks for Chef Automate does not query other services.

This operation is synchronous.

A ResourceNotFoundException is thrown when the server does not exist. A ValidationException is raised when parameters of the request are invalid.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS OpsWorks for Chef Automate's API operation DescribeServers for usage and error information.

Returned Error Codes:

  • ValidationException One or more of the provided request parameters are not valid.

  • ResourceNotFoundException The requested resource does not exist, or access was denied.

  • InvalidNextTokenException This occurs when the provided nextToken is not valid.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/opsworkscm"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := opsworkscm.New(sess)

	params := &opsworkscm.DescribeServersInput{
		MaxResults: aws.Int64(1),
		NextToken:  aws.String("NextToken"),
		ServerName: aws.String("ServerName"),
	}
	resp, err := svc.DescribeServers(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*OpsWorksCM) DescribeServersRequest

func (c *OpsWorksCM) DescribeServersRequest(input *DescribeServersInput) (req *request.Request, output *DescribeServersOutput)

DescribeServersRequest generates a "aws/request.Request" representing the client's request for the DescribeServers operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeServers for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeServers method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeServersRequest method.
req, resp := client.DescribeServersRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*OpsWorksCM) DisassociateNode

func (c *OpsWorksCM) DisassociateNode(input *DisassociateNodeInput) (*DisassociateNodeOutput, error)

DisassociateNode API operation for AWS OpsWorks for Chef Automate.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS OpsWorks for Chef Automate's API operation DisassociateNode for usage and error information.

Returned Error Codes:

  • InvalidStateException The resource is in a state that does not allow you to perform a specified action.

  • ResourceNotFoundException The requested resource does not exist, or access was denied.

  • ValidationException One or more of the provided request parameters are not valid.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/opsworkscm"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := opsworkscm.New(sess)

	params := &opsworkscm.DisassociateNodeInput{
		NodeName:   aws.String("NodeName"),   // Required
		ServerName: aws.String("ServerName"), // Required
		EngineAttributes: []*opsworkscm.EngineAttribute{
			{ // Required
				Name:  aws.String("String"),
				Value: aws.String("String"),
			},
			// More values...
		},
	}
	resp, err := svc.DisassociateNode(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*OpsWorksCM) DisassociateNodeRequest

func (c *OpsWorksCM) DisassociateNodeRequest(input *DisassociateNodeInput) (req *request.Request, output *DisassociateNodeOutput)

DisassociateNodeRequest generates a "aws/request.Request" representing the client's request for the DisassociateNode operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DisassociateNode for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DisassociateNode method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DisassociateNodeRequest method.
req, resp := client.DisassociateNodeRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*OpsWorksCM) RestoreServer

func (c *OpsWorksCM) RestoreServer(input *RestoreServerInput) (*RestoreServerOutput, error)

RestoreServer API operation for AWS OpsWorks for Chef Automate.

Restores a backup to a server that is in a RUNNING, FAILED, or HEALTHY state. When you run RestoreServer, the server's EC2 instance is deleted, and a new EC2 instance is configured. RestoreServer maintains the existing server endpoint, so configuration management of all of the server's client devices should continue to work.

This operation is asynchronous.

A InvalidStateException is thrown when the server is not in a valid state. A ResourceNotFoundException is thrown when the server does not exist. A ValidationException is raised when parameters of the request are invalid.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS OpsWorks for Chef Automate's API operation RestoreServer for usage and error information.

Returned Error Codes:

  • InvalidStateException The resource is in a state that does not allow you to perform a specified action.

  • ResourceNotFoundException The requested resource does not exist, or access was denied.

  • ValidationException One or more of the provided request parameters are not valid.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/opsworkscm"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := opsworkscm.New(sess)

	params := &opsworkscm.RestoreServerInput{
		BackupId:     aws.String("BackupId"),   // Required
		ServerName:   aws.String("ServerName"), // Required
		InstanceType: aws.String("String"),
		KeyPair:      aws.String("KeyPair"),
	}
	resp, err := svc.RestoreServer(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*OpsWorksCM) RestoreServerRequest

func (c *OpsWorksCM) RestoreServerRequest(input *RestoreServerInput) (req *request.Request, output *RestoreServerOutput)

RestoreServerRequest generates a "aws/request.Request" representing the client's request for the RestoreServer operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See RestoreServer for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the RestoreServer method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the RestoreServerRequest method.
req, resp := client.RestoreServerRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*OpsWorksCM) StartMaintenance

func (c *OpsWorksCM) StartMaintenance(input *StartMaintenanceInput) (*StartMaintenanceOutput, error)

StartMaintenance API operation for AWS OpsWorks for Chef Automate.

Manually starts server maintenance. This command can be useful if an earlier maintenance attempt failed, and the underlying cause of maintenance failure has been resolved. The server will switch to UNDER_MAINTENANCE state, while maintenace is in progress.

Maintenace can only be started for HEALTHY and UNHEALTHY servers. A InvalidStateException is thrown otherwise. A ResourceNotFoundException is thrown when the server does not exist. A ValidationException is raised when parameters of the request are invalid.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS OpsWorks for Chef Automate's API operation StartMaintenance for usage and error information.

Returned Error Codes:

  • InvalidStateException The resource is in a state that does not allow you to perform a specified action.

  • ResourceNotFoundException The requested resource does not exist, or access was denied.

  • ValidationException One or more of the provided request parameters are not valid.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/opsworkscm"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := opsworkscm.New(sess)

	params := &opsworkscm.StartMaintenanceInput{
		ServerName: aws.String("ServerName"), // Required
	}
	resp, err := svc.StartMaintenance(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*OpsWorksCM) StartMaintenanceRequest

func (c *OpsWorksCM) StartMaintenanceRequest(input *StartMaintenanceInput) (req *request.Request, output *StartMaintenanceOutput)

StartMaintenanceRequest generates a "aws/request.Request" representing the client's request for the StartMaintenance operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See StartMaintenance for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the StartMaintenance method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the StartMaintenanceRequest method.
req, resp := client.StartMaintenanceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*OpsWorksCM) UpdateServer

func (c *OpsWorksCM) UpdateServer(input *UpdateServerInput) (*UpdateServerOutput, error)

UpdateServer API operation for AWS OpsWorks for Chef Automate.

Updates settings for a server.

This operation is synchronous.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS OpsWorks for Chef Automate's API operation UpdateServer for usage and error information.

Returned Error Codes:

  • InvalidStateException The resource is in a state that does not allow you to perform a specified action.

  • ResourceNotFoundException The requested resource does not exist, or access was denied.

  • ValidationException One or more of the provided request parameters are not valid.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/opsworkscm"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := opsworkscm.New(sess)

	params := &opsworkscm.UpdateServerInput{
		ServerName:                 aws.String("ServerName"), // Required
		BackupRetentionCount:       aws.Int64(1),
		DisableAutomatedBackup:     aws.Bool(true),
		PreferredBackupWindow:      aws.String("TimeWindowDefinition"),
		PreferredMaintenanceWindow: aws.String("TimeWindowDefinition"),
	}
	resp, err := svc.UpdateServer(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*OpsWorksCM) UpdateServerEngineAttributes

func (c *OpsWorksCM) UpdateServerEngineAttributes(input *UpdateServerEngineAttributesInput) (*UpdateServerEngineAttributesOutput, error)

UpdateServerEngineAttributes API operation for AWS OpsWorks for Chef Automate.

Updates engine specific attributes on a specified server. Server will enter the MODIFYING state when this operation is in progress. Only one update can take place at a time.

This operation can be use to reset Chef Server main API key (CHEF_PIVOTAL_KEY).

This operation is asynchronous.

This operation can only be called for HEALTHY and UNHEALTHY servers. Otherwise a InvalidStateException is raised. A ResourceNotFoundException is thrown when the server does not exist. A ValidationException is raised when parameters of the request are invalid.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS OpsWorks for Chef Automate's API operation UpdateServerEngineAttributes for usage and error information.

Returned Error Codes:

  • InvalidStateException The resource is in a state that does not allow you to perform a specified action.

  • ResourceNotFoundException The requested resource does not exist, or access was denied.

  • ValidationException One or more of the provided request parameters are not valid.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/opsworkscm"
)

func main() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := opsworkscm.New(sess)

	params := &opsworkscm.UpdateServerEngineAttributesInput{
		AttributeName:  aws.String("AttributeName"), // Required
		ServerName:     aws.String("ServerName"),    // Required
		AttributeValue: aws.String("AttributeValue"),
	}
	resp, err := svc.UpdateServerEngineAttributes(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*OpsWorksCM) UpdateServerEngineAttributesRequest

func (c *OpsWorksCM) UpdateServerEngineAttributesRequest(input *UpdateServerEngineAttributesInput) (req *request.Request, output *UpdateServerEngineAttributesOutput)

UpdateServerEngineAttributesRequest generates a "aws/request.Request" representing the client's request for the UpdateServerEngineAttributes operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See UpdateServerEngineAttributes for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the UpdateServerEngineAttributes method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the UpdateServerEngineAttributesRequest method.
req, resp := client.UpdateServerEngineAttributesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

func (*OpsWorksCM) UpdateServerRequest

func (c *OpsWorksCM) UpdateServerRequest(input *UpdateServerInput) (req *request.Request, output *UpdateServerOutput)

UpdateServerRequest generates a "aws/request.Request" representing the client's request for the UpdateServer operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See UpdateServer for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the UpdateServer method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the UpdateServerRequest method.
req, resp := client.UpdateServerRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

type RestoreServerInput

type RestoreServerInput struct {

	// The ID of the backup that you want to use to restore a server.
	//
	// BackupId is a required field
	BackupId *string `type:"string" required:"true"`

	// The type of the instance to create. Valid values must be specified in the
	// following format: ^([cm][34]|t2).* For example, c3.large. If you do not specify
	// this parameter, RestoreServer uses the instance type from the specified backup.
	InstanceType *string `type:"string"`

	// The name of the key pair to set on the new EC2 instance. This can be helpful
	// if any of the administrators who manage the server no longer have the SSH
	// key.
	KeyPair *string `type:"string"`

	// The name of the server that you want to restore.
	//
	// ServerName is a required field
	ServerName *string `min:"1" type:"string" required:"true"`
	// contains filtered or unexported fields
}

func (RestoreServerInput) GoString

func (s RestoreServerInput) GoString() string

GoString returns the string representation

func (*RestoreServerInput) SetBackupId

func (s *RestoreServerInput) SetBackupId(v string) *RestoreServerInput

SetBackupId sets the BackupId field's value.

func (*RestoreServerInput) SetInstanceType

func (s *RestoreServerInput) SetInstanceType(v string) *RestoreServerInput

SetInstanceType sets the InstanceType field's value.

func (*RestoreServerInput) SetKeyPair

func (s *RestoreServerInput) SetKeyPair(v string) *RestoreServerInput

SetKeyPair sets the KeyPair field's value.

func (*RestoreServerInput) SetServerName

func (s *RestoreServerInput) SetServerName(v string) *RestoreServerInput

SetServerName sets the ServerName field's value.

func (RestoreServerInput) String

func (s RestoreServerInput) String() string

String returns the string representation

func (*RestoreServerInput) Validate

func (s *RestoreServerInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type RestoreServerOutput

type RestoreServerOutput struct {
	// contains filtered or unexported fields
}

func (RestoreServerOutput) GoString

func (s RestoreServerOutput) GoString() string

GoString returns the string representation

func (RestoreServerOutput) String

func (s RestoreServerOutput) String() string

String returns the string representation

type Server

type Server struct {

	// The number of automated backups to keep.
	BackupRetentionCount *int64 `type:"integer"`

	// Time stamp of server creation. Example 2016-07-29T13:38:47.520Z
	CreatedAt *time.Time `type:"timestamp" timestampFormat:"unix"`

	// Disables automated backups. The number of stored backups is dependent on
	// the value of PreferredBackupCount.
	DisableAutomatedBackup *bool `type:"boolean"`

	// A DNS name that can be used to access the engine. Example: myserver-asdfghjkl.us-east-1.opsworks.io
	Endpoint *string `type:"string"`

	// The engine type of the server. The valid value in this release is Chef.
	Engine *string `type:"string"`

	// The response of a createServer() request returns the master credential to
	// access the server in EngineAttributes. These credentials are not stored by
	// AWS OpsWorks for Chef Automate; they are returned only as part of the result
	// of createServer().
	//
	// Attributes returned in a createServer response:
	//
	//    * CHEF_PIVOTAL_KEY: A base64-encoded RSA private key that is generated
	//    by AWS OpsWorks for Chef Automate. This private key is required to access
	//    the Chef API.
	//
	//    * CHEF_STARTER_KIT: A base64-encoded ZIP file. The ZIP file contains a
	//    Chef starter kit, which includes a README, a configuration file, and the
	//    required RSA private key. Save this file, unzip it, and then change to
	//    the directory where you've unzipped the file contents. From this directory,
	//    you can run Knife commands.
	EngineAttributes []*EngineAttribute `type:"list"`

	// The engine model of the server. The valid value in this release is Single.
	EngineModel *string `type:"string"`

	// The engine version of the server. Because Chef is the engine available in
	// this release, the valid value for EngineVersion is 12.
	EngineVersion *string `type:"string"`

	// The instance profile ARN of the server.
	InstanceProfileArn *string `type:"string"`

	// The instance type for the server, as specified in the CloudFormation stack.
	// This might not be the same instance type that is shown in the EC2 console.
	InstanceType *string `type:"string"`

	// The key pair associated with the server.
	KeyPair *string `type:"string"`

	// The status of the most recent server maintenance run. Shows SUCCESS or FAILED.
	MaintenanceStatus *string `type:"string" enum:"MaintenanceStatus"`

	// The preferred backup period specified for the server.
	PreferredBackupWindow *string `type:"string"`

	// The preferred maintenance period specified for the server.
	PreferredMaintenanceWindow *string `type:"string"`

	// The security group IDs for the server, as specified in the CloudFormation
	// stack. These might not be the same security groups that are shown in the
	// EC2 console.
	SecurityGroupIds []*string `type:"list"`

	// The ARN of the server.
	ServerArn *string `type:"string"`

	// The name of the server.
	ServerName *string `type:"string"`

	// The service role ARN used to create the server.
	ServiceRoleArn *string `type:"string"`

	// The server's status. This field displays the states of actions in progress,
	// such as creating, running, or backing up the server, as well as server health.
	Status *string `type:"string" enum:"ServerStatus"`

	// Depending on the server status, this field has either a human-readable message
	// (such as a create or backup error), or an escaped block of JSON (used for
	// health check results).
	StatusReason *string `type:"string"`

	// The subnet IDs specified in a CreateServer request.
	SubnetIds []*string `type:"list"`
	// contains filtered or unexported fields
}

Describes a configuration management server.

func (Server) GoString

func (s Server) GoString() string

GoString returns the string representation

func (*Server) SetBackupRetentionCount

func (s *Server) SetBackupRetentionCount(v int64) *Server

SetBackupRetentionCount sets the BackupRetentionCount field's value.

func (*Server) SetCreatedAt

func (s *Server) SetCreatedAt(v time.Time) *Server

SetCreatedAt sets the CreatedAt field's value.

func (*Server) SetDisableAutomatedBackup

func (s *Server) SetDisableAutomatedBackup(v bool) *Server

SetDisableAutomatedBackup sets the DisableAutomatedBackup field's value.

func (*Server) SetEndpoint

func (s *Server) SetEndpoint(v string) *Server

SetEndpoint sets the Endpoint field's value.

func (*Server) SetEngine

func (s *Server) SetEngine(v string) *Server

SetEngine sets the Engine field's value.

func (*Server) SetEngineAttributes

func (s *Server) SetEngineAttributes(v []*EngineAttribute) *Server

SetEngineAttributes sets the EngineAttributes field's value.

func (*Server) SetEngineModel

func (s *Server) SetEngineModel(v string) *Server

SetEngineModel sets the EngineModel field's value.

func (*Server) SetEngineVersion

func (s *Server) SetEngineVersion(v string) *Server

SetEngineVersion sets the EngineVersion field's value.

func (*Server) SetInstanceProfileArn

func (s *Server) SetInstanceProfileArn(v string) *Server

SetInstanceProfileArn sets the InstanceProfileArn field's value.

func (*Server) SetInstanceType

func (s *Server) SetInstanceType(v string) *Server

SetInstanceType sets the InstanceType field's value.

func (*Server) SetKeyPair

func (s *Server) SetKeyPair(v string) *Server

SetKeyPair sets the KeyPair field's value.

func (*Server) SetMaintenanceStatus

func (s *Server) SetMaintenanceStatus(v string) *Server

SetMaintenanceStatus sets the MaintenanceStatus field's value.

func (*Server) SetPreferredBackupWindow

func (s *Server) SetPreferredBackupWindow(v string) *Server

SetPreferredBackupWindow sets the PreferredBackupWindow field's value.

func (*Server) SetPreferredMaintenanceWindow

func (s *Server) SetPreferredMaintenanceWindow(v string) *Server

SetPreferredMaintenanceWindow sets the PreferredMaintenanceWindow field's value.

func (*Server) SetSecurityGroupIds

func (s *Server) SetSecurityGroupIds(v []*string) *Server

SetSecurityGroupIds sets the SecurityGroupIds field's value.

func (*Server) SetServerArn

func (s *Server) SetServerArn(v string) *Server

SetServerArn sets the ServerArn field's value.

func (*Server) SetServerName

func (s *Server) SetServerName(v string) *Server

SetServerName sets the ServerName field's value.

func (*Server) SetServiceRoleArn

func (s *Server) SetServiceRoleArn(v string) *Server

SetServiceRoleArn sets the ServiceRoleArn field's value.

func (*Server) SetStatus

func (s *Server) SetStatus(v string) *Server

SetStatus sets the Status field's value.

func (*Server) SetStatusReason

func (s *Server) SetStatusReason(v string) *Server

SetStatusReason sets the StatusReason field's value.

func (*Server) SetSubnetIds

func (s *Server) SetSubnetIds(v []*string) *Server

SetSubnetIds sets the SubnetIds field's value.

func (Server) String

func (s Server) String() string

String returns the string representation

type ServerEvent

type ServerEvent struct {

	// The time when the event occurred.
	CreatedAt *time.Time `type:"timestamp" timestampFormat:"unix"`

	// The Amazon S3 URL of the event's log file.
	LogUrl *string `type:"string"`

	// A human-readable informational or status message.
	Message *string `type:"string"`

	// The name of the server on or for which the event occurred.
	ServerName *string `type:"string"`
	// contains filtered or unexported fields
}

An event that is related to the server, such as the start of maintenance or backup.

func (ServerEvent) GoString

func (s ServerEvent) GoString() string

GoString returns the string representation

func (*ServerEvent) SetCreatedAt

func (s *ServerEvent) SetCreatedAt(v time.Time) *ServerEvent

SetCreatedAt sets the CreatedAt field's value.

func (*ServerEvent) SetLogUrl

func (s *ServerEvent) SetLogUrl(v string) *ServerEvent

SetLogUrl sets the LogUrl field's value.

func (*ServerEvent) SetMessage

func (s *ServerEvent) SetMessage(v string) *ServerEvent

SetMessage sets the Message field's value.

func (*ServerEvent) SetServerName

func (s *ServerEvent) SetServerName(v string) *ServerEvent

SetServerName sets the ServerName field's value.

func (ServerEvent) String

func (s ServerEvent) String() string

String returns the string representation

type StartMaintenanceInput

type StartMaintenanceInput struct {

	// The name of the server on which to run maintenance.
	//
	// ServerName is a required field
	ServerName *string `min:"1" type:"string" required:"true"`
	// contains filtered or unexported fields
}

func (StartMaintenanceInput) GoString

func (s StartMaintenanceInput) GoString() string

GoString returns the string representation

func (*StartMaintenanceInput) SetServerName

func (s *StartMaintenanceInput) SetServerName(v string) *StartMaintenanceInput

SetServerName sets the ServerName field's value.

func (StartMaintenanceInput) String

func (s StartMaintenanceInput) String() string

String returns the string representation

func (*StartMaintenanceInput) Validate

func (s *StartMaintenanceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type StartMaintenanceOutput

type StartMaintenanceOutput struct {

	// Contains the response to a StartMaintenance request.
	Server *Server `type:"structure"`
	// contains filtered or unexported fields
}

func (StartMaintenanceOutput) GoString

func (s StartMaintenanceOutput) GoString() string

GoString returns the string representation

func (*StartMaintenanceOutput) SetServer

SetServer sets the Server field's value.

func (StartMaintenanceOutput) String

func (s StartMaintenanceOutput) String() string

String returns the string representation

type UpdateServerEngineAttributesInput

type UpdateServerEngineAttributesInput struct {

	// The name of the engine attribute to update.
	//
	// AttributeName is a required field
	AttributeName *string `min:"1" type:"string" required:"true"`

	// The value to set for the attribute.
	AttributeValue *string `type:"string"`

	// The name of the server to update.
	//
	// ServerName is a required field
	ServerName *string `min:"1" type:"string" required:"true"`
	// contains filtered or unexported fields
}

func (UpdateServerEngineAttributesInput) GoString

GoString returns the string representation

func (*UpdateServerEngineAttributesInput) SetAttributeName

SetAttributeName sets the AttributeName field's value.

func (*UpdateServerEngineAttributesInput) SetAttributeValue

SetAttributeValue sets the AttributeValue field's value.

func (*UpdateServerEngineAttributesInput) SetServerName

SetServerName sets the ServerName field's value.

func (UpdateServerEngineAttributesInput) String

String returns the string representation

func (*UpdateServerEngineAttributesInput) Validate

Validate inspects the fields of the type to determine if they are valid.

type UpdateServerEngineAttributesOutput

type UpdateServerEngineAttributesOutput struct {

	// Contains the response to an UpdateServerEngineAttributes request.
	Server *Server `type:"structure"`
	// contains filtered or unexported fields
}

func (UpdateServerEngineAttributesOutput) GoString

GoString returns the string representation

func (*UpdateServerEngineAttributesOutput) SetServer

SetServer sets the Server field's value.

func (UpdateServerEngineAttributesOutput) String

String returns the string representation

type UpdateServerInput

type UpdateServerInput struct {

	// Sets the number of automated backups that you want to keep.
	BackupRetentionCount *int64 `type:"integer"`

	// Setting DisableAutomatedBackup to true disables automated or scheduled backups.
	// Automated backups are enabled by default.
	DisableAutomatedBackup *bool `type:"boolean"`

	// DDD:HH:MM (weekly start time) or HH:MM (daily start time).
	//
	// Time windows always use coordinated universal time (UTC).
	//
	// Valid strings for day of week (DDD) are: Mon, Tue, Wed, Thr, Fri, Sat, Sun.
	PreferredBackupWindow *string `type:"string"`

	// DDD:HH:MM (weekly start time) or HH:MM (daily start time).
	//
	// Time windows always use coordinated universal time (UTC).
	//
	// Valid strings for day of week (DDD) are: Mon, Tue, Wed, Thr, Fri, Sat, Sun.
	PreferredMaintenanceWindow *string `type:"string"`

	// The name of the server to update.
	//
	// ServerName is a required field
	ServerName *string `min:"1" type:"string" required:"true"`
	// contains filtered or unexported fields
}

func (UpdateServerInput) GoString

func (s UpdateServerInput) GoString() string

GoString returns the string representation

func (*UpdateServerInput) SetBackupRetentionCount

func (s *UpdateServerInput) SetBackupRetentionCount(v int64) *UpdateServerInput

SetBackupRetentionCount sets the BackupRetentionCount field's value.

func (*UpdateServerInput) SetDisableAutomatedBackup

func (s *UpdateServerInput) SetDisableAutomatedBackup(v bool) *UpdateServerInput

SetDisableAutomatedBackup sets the DisableAutomatedBackup field's value.

func (*UpdateServerInput) SetPreferredBackupWindow

func (s *UpdateServerInput) SetPreferredBackupWindow(v string) *UpdateServerInput

SetPreferredBackupWindow sets the PreferredBackupWindow field's value.

func (*UpdateServerInput) SetPreferredMaintenanceWindow

func (s *UpdateServerInput) SetPreferredMaintenanceWindow(v string) *UpdateServerInput

SetPreferredMaintenanceWindow sets the PreferredMaintenanceWindow field's value.

func (*UpdateServerInput) SetServerName

func (s *UpdateServerInput) SetServerName(v string) *UpdateServerInput

SetServerName sets the ServerName field's value.

func (UpdateServerInput) String

func (s UpdateServerInput) String() string

String returns the string representation

func (*UpdateServerInput) Validate

func (s *UpdateServerInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type UpdateServerOutput

type UpdateServerOutput struct {

	// Contains the response to a UpdateServer request.
	Server *Server `type:"structure"`
	// contains filtered or unexported fields
}

func (UpdateServerOutput) GoString

func (s UpdateServerOutput) GoString() string

GoString returns the string representation

func (*UpdateServerOutput) SetServer

func (s *UpdateServerOutput) SetServer(v *Server) *UpdateServerOutput

SetServer sets the Server field's value.

func (UpdateServerOutput) String

func (s UpdateServerOutput) String() string

String returns the string representation

Directories

Path Synopsis
Package opsworkscmiface provides an interface to enable mocking the AWS OpsWorks for Chef Automate service client for testing your code.
Package opsworkscmiface provides an interface to enable mocking the AWS OpsWorks for Chef Automate service client for testing your code.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL