kinesis

package
v0.0.0-...-69b7239 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Mar 17, 2016 License: Apache-2.0 Imports: 4 Imported by: 0

Documentation

Overview

Package kinesis provides a client for Amazon Kinesis.

Index

Constants

View Source
const (
	ShardIteratorTypeAfterSequenceNumber = "AFTER_SEQUENCE_NUMBER"
	ShardIteratorTypeAtSequenceNumber    = "AT_SEQUENCE_NUMBER"
	ShardIteratorTypeLatest              = "LATEST"
	ShardIteratorTypeTrimHorizon         = "TRIM_HORIZON"
)

Possible values for Kinesis.

View Source
const (
	StreamStatusActive   = "ACTIVE"
	StreamStatusCreating = "CREATING"
	StreamStatusDeleting = "DELETING"
	StreamStatusUpdating = "UPDATING"
)

Possible values for Kinesis.

Variables

This section is empty.

Functions

This section is empty.

Types

type AddTagsToStreamInput

type AddTagsToStreamInput struct {
	StreamName aws.StringValue   `json:"StreamName"`
	Tags       map[string]string `json:"Tags"`
}

AddTagsToStreamInput is undocumented.

type CreateStreamInput

type CreateStreamInput struct {
	ShardCount aws.IntegerValue `json:"ShardCount"`
	StreamName aws.StringValue  `json:"StreamName"`
}

CreateStreamInput is undocumented.

type DeleteStreamInput

type DeleteStreamInput struct {
	StreamName aws.StringValue `json:"StreamName"`
}

DeleteStreamInput is undocumented.

type DescribeStreamInput

type DescribeStreamInput struct {
	ExclusiveStartShardID aws.StringValue  `json:"ExclusiveStartShardId,omitempty"`
	Limit                 aws.IntegerValue `json:"Limit,omitempty"`
	StreamName            aws.StringValue  `json:"StreamName"`
}

DescribeStreamInput is undocumented.

type DescribeStreamOutput

type DescribeStreamOutput struct {
	StreamDescription *StreamDescription `json:"StreamDescription"`
}

DescribeStreamOutput is undocumented.

type GetRecordsInput

type GetRecordsInput struct {
	Limit         aws.IntegerValue `json:"Limit,omitempty"`
	ShardIterator aws.StringValue  `json:"ShardIterator"`
}

GetRecordsInput is undocumented.

type GetRecordsOutput

type GetRecordsOutput struct {
	NextShardIterator aws.StringValue `json:"NextShardIterator,omitempty"`
	Records           []Record        `json:"Records"`
}

GetRecordsOutput is undocumented.

type GetShardIteratorInput

type GetShardIteratorInput struct {
	ShardID                aws.StringValue `json:"ShardId"`
	ShardIteratorType      aws.StringValue `json:"ShardIteratorType"`
	StartingSequenceNumber aws.StringValue `json:"StartingSequenceNumber,omitempty"`
	StreamName             aws.StringValue `json:"StreamName"`
}

GetShardIteratorInput is undocumented.

type GetShardIteratorOutput

type GetShardIteratorOutput struct {
	ShardIterator aws.StringValue `json:"ShardIterator,omitempty"`
}

GetShardIteratorOutput is undocumented.

type HashKeyRange

type HashKeyRange struct {
	EndingHashKey   aws.StringValue `json:"EndingHashKey"`
	StartingHashKey aws.StringValue `json:"StartingHashKey"`
}

HashKeyRange is undocumented.

type Kinesis

type Kinesis struct {
	// contains filtered or unexported fields
}

Kinesis is a client for Amazon Kinesis.

func New

func New(creds aws.CredentialsProvider, region string, client *http.Client) *Kinesis

New returns a new Kinesis client.

func (*Kinesis) AddTagsToStream

func (c *Kinesis) AddTagsToStream(req *AddTagsToStreamInput) (err error)

AddTagsToStream adds or updates tags for the specified Amazon Kinesis stream. Each stream can have up to 10 tags. If tags have already been assigned to the stream, AddTagsToStream overwrites any existing tags that correspond to the specified tag keys.

func (*Kinesis) CreateStream

func (c *Kinesis) CreateStream(req *CreateStreamInput) (err error)

CreateStream creates a Amazon Kinesis stream. A stream captures and transports data records that are continuously emitted from different data sources or producers . Scale-out within an Amazon Kinesis stream is explicitly supported by means of shards, which are uniquely identified groups of data records in an Amazon Kinesis stream. You specify and control the number of shards that a stream is composed of. Each open shard can support up to 5 read transactions per second, up to a maximum total of 2 MB of data read per second. Each shard can support up to 1000 records written per second, up to a maximum total of 1 MB data written per second. You can add shards to a stream if the amount of data input increases and you can remove shards if the amount of data input decreases. The stream name identifies the stream. The name is scoped to the AWS account used by the application. It is also scoped by region. That is, two streams in two different accounts can have the same name, and two streams in the same account, but in two different regions, can have the same name. CreateStream is an asynchronous operation. Upon receiving a CreateStream request, Amazon Kinesis immediately returns and sets the stream status to . After the stream is created, Amazon Kinesis sets the stream status to . You should perform read and write operations only on an stream. You receive a LimitExceededException when making a CreateStream request if you try to do one of the following: Have more than five streams in the state at any point in time. Create more shards than are authorized for your account. The default limit for an AWS account is 10 shards per stream. If you need to create a stream with more than 10 shards, contact AWS Support to increase the limit on your account. You can use DescribeStream to check the stream status, which is returned in StreamStatus CreateStream has a limit of 5 transactions per second per account.

func (*Kinesis) DeleteStream

func (c *Kinesis) DeleteStream(req *DeleteStreamInput) (err error)

DeleteStream deletes a stream and all its shards and data. You must shut down any applications that are operating on the stream before you delete the stream. If an application attempts to operate on a deleted stream, it will receive the exception ResourceNotFoundException If the stream is in the state, you can delete it. After a DeleteStream request, the specified stream is in the state until Amazon Kinesis completes the deletion. Note: Amazon Kinesis might continue to accept data read and write operations, such as PutRecord , PutRecords , and GetRecords , on a stream in the state until the stream deletion is complete. When you delete a stream, any shards in that stream are also deleted, and any tags are dissociated from the stream. You can use the DescribeStream operation to check the state of the stream, which is returned in StreamStatus DeleteStream has a limit of 5 transactions per second per account.

func (*Kinesis) DescribeStream

func (c *Kinesis) DescribeStream(req *DescribeStreamInput) (resp *DescribeStreamOutput, err error)

DescribeStream describes the specified stream. The information about the stream includes its current status, its Amazon Resource Name and an array of shard objects. For each shard object, there is information about the hash key and sequence number ranges that the shard spans, and the IDs of any earlier shards that played in a role in creating the shard. A sequence number is the identifier associated with every record ingested in the Amazon Kinesis stream. The sequence number is assigned when a record is put into the stream. You can limit the number of returned shards using the Limit parameter. The number of shards in a stream may be too large to return from a single call to DescribeStream . You can detect this by using the HasMoreShards flag in the returned output. HasMoreShards is set to true when there is more data available. DescribeStream is a paginated operation. If there are more shards available, you can request them using the shard ID of the last shard returned. Specify this ID in the ExclusiveStartShardId parameter in a subsequent request to DescribeStream . DescribeStream has a limit of 10 transactions per second per account.

func (*Kinesis) GetRecords

func (c *Kinesis) GetRecords(req *GetRecordsInput) (resp *GetRecordsOutput, err error)

GetRecords gets data records from a shard. Specify a shard iterator using the ShardIterator parameter. The shard iterator specifies the position in the shard from which you want to start reading data records sequentially. If there are no records available in the portion of the shard that the iterator points to, GetRecords returns an empty list. Note that it might take multiple calls to get to a portion of the shard that contains records. You can scale by provisioning multiple shards. Your application should have one thread per shard, each reading continuously from its stream. To read from a stream continually, call GetRecords in a loop. Use GetShardIterator to get the shard iterator to specify in the first GetRecords call. GetRecords returns a new shard iterator in NextShardIterator . Specify the shard iterator returned in NextShardIterator in subsequent calls to GetRecords . Note that if the shard has been closed, the shard iterator can't return more data and GetRecords returns null in NextShardIterator . You can terminate the loop when the shard is closed, or when the shard iterator reaches the record with the sequence number or other attribute that marks it as the last record to process. Each data record can be up to 50 KB in size, and each shard can read up to 2 MB per second. You can ensure that your calls don't exceed the maximum supported size or throughput by using the Limit parameter to specify the maximum number of records that GetRecords can return. Consider your average record size when determining this limit. For example, if your average record size is 40 KB, you can limit the data returned to about 1 MB per call by specifying 25 as the limit. The size of the data returned by GetRecords will vary depending on the utilization of the shard. The maximum size of data that GetRecords can return is 10 MB. If a call returns 10 MB of data, subsequent calls made within the next 5 seconds throw ProvisionedThroughputExceededException . If there is insufficient provisioned throughput on the shard, subsequent calls made within the next 1 second throw ProvisionedThroughputExceededException . Note that GetRecords won't return any data when it throws an exception. For this reason, we recommend that you wait one second between calls to GetRecords ; however, it's possible that the application will get exceptions for longer than 1 second. To detect whether the application is falling behind in processing, add a timestamp to your records and note how long it takes to process them. You can also monitor how much data is in a stream using the CloudWatch metrics for write operations PutRecord and PutRecords ). For more information, see Monitoring Amazon Kinesis with Amazon CloudWatch in the Amazon Kinesis Developer Guide

func (*Kinesis) GetShardIterator

func (c *Kinesis) GetShardIterator(req *GetShardIteratorInput) (resp *GetShardIteratorOutput, err error)

GetShardIterator gets a shard iterator. A shard iterator expires five minutes after it is returned to the requester. A shard iterator specifies the position in the shard from which to start reading data records sequentially. A shard iterator specifies this position using the sequence number of a data record in a shard. A sequence number is the identifier associated with every record ingested in the Amazon Kinesis stream. The sequence number is assigned when a record is put into the stream. You must specify the shard iterator type. For example, you can set the ShardIteratorType parameter to read exactly from the position denoted by a specific sequence number by using the shard iterator type, or right after the sequence number by using the shard iterator type, using sequence numbers returned by earlier calls to PutRecord , PutRecords , GetRecords , or DescribeStream . You can specify the shard iterator type in the request to cause ShardIterator to point to the last untrimmed record in the shard in the system, which is the oldest data record in the shard. Or you can point to just after the most recent record in the shard, by using the shard iterator type , so that you always read the most recent data in the shard. When you repeatedly read from an Amazon Kinesis stream use a GetShardIterator request to get the first shard iterator to to use in your first GetRecords request and then use the shard iterator returned by the GetRecords request in NextShardIterator for subsequent reads. A new shard iterator is returned by every GetRecords request in NextShardIterator , which you use in the ShardIterator parameter of the next GetRecords request. If a GetShardIterator request is made too often, you receive a ProvisionedThroughputExceededException . For more information about throughput limits, see GetRecords If the shard is closed, the iterator can't return more data, and GetShardIterator returns null for its ShardIterator . A shard can be closed using SplitShard or MergeShards GetShardIterator has a limit of 5 transactions per second per account per open shard.

func (*Kinesis) ListStreams

func (c *Kinesis) ListStreams(req *ListStreamsInput) (resp *ListStreamsOutput, err error)

ListStreams lists your streams. The number of streams may be too large to return from a single call to ListStreams . You can limit the number of returned streams using the Limit parameter. If you do not specify a value for the Limit parameter, Amazon Kinesis uses the default limit, which is currently 10. You can detect if there are more streams available to list by using the HasMoreStreams flag from the returned output. If there are more streams available, you can request more streams by using the name of the last stream returned by the ListStreams request in the ExclusiveStartStreamName parameter in a subsequent request to ListStreams . The group of stream names returned by the subsequent request is then added to the list. You can continue this process until all the stream names have been collected in the list. ListStreams has a limit of 5 transactions per second per account.

func (*Kinesis) ListTagsForStream

func (c *Kinesis) ListTagsForStream(req *ListTagsForStreamInput) (resp *ListTagsForStreamOutput, err error)

ListTagsForStream lists the tags for the specified Amazon Kinesis stream.

func (*Kinesis) MergeShards

func (c *Kinesis) MergeShards(req *MergeShardsInput) (err error)

MergeShards merges two adjacent shards in a stream and combines them into a single shard to reduce the stream's capacity to ingest and transport data. Two shards are considered adjacent if the union of the hash key ranges for the two shards form a contiguous set with no gaps. For example, if you have two shards, one with a hash key range of 276...381 and the other with a hash key range of 382...454, then you could merge these two shards into a single shard that would have a hash key range of 276...454. After the merge, the single child shard receives data for all hash key values covered by the two parent shards. MergeShards is called when there is a need to reduce the overall capacity of a stream because of excess capacity that is not being used. You must specify the shard to be merged and the adjacent shard for a stream. For more information about merging shards, see Merge Two Shards in the Amazon Kinesis Developer Guide If the stream is in the state, you can call MergeShards . If a stream is in the , , or state, MergeShards returns a ResourceInUseException . If the specified stream does not exist, MergeShards returns a ResourceNotFoundException . You can use DescribeStream to check the state of the stream, which is returned in StreamStatus MergeShards is an asynchronous operation. Upon receiving a MergeShards request, Amazon Kinesis immediately returns a response and sets the StreamStatus to . After the operation is completed, Amazon Kinesis sets the StreamStatus to . Read and write operations continue to work while the stream is in the state. You use DescribeStream to determine the shard IDs that are specified in the MergeShards request. If you try to operate on too many streams in parallel using CreateStream , DeleteStream , MergeShards or SplitShard , you will receive a LimitExceededException . MergeShards has limit of 5 transactions per second per account.

func (*Kinesis) PutRecord

func (c *Kinesis) PutRecord(req *PutRecordInput) (resp *PutRecordOutput, err error)

PutRecord puts (writes) a single data record from a producer into an Amazon Kinesis stream. Call PutRecord to send data from the producer into the Amazon Kinesis stream for real-time ingestion and subsequent processing, one record at a time. Each shard can support up to 1000 records written per second, up to a maximum total of 1 MB data written per second. You must specify the name of the stream that captures, stores, and transports the data; a partition key; and the data blob itself. The data blob can be any type of data; for example, a segment from a log file, geographic/location data, website clickstream data, and so on. The partition key is used by Amazon Kinesis to distribute data across shards. Amazon Kinesis segregates the data records that belong to a data stream into multiple shards, using the partition key associated with each data record to determine which shard a given data record belongs to. Partition keys are Unicode strings, with a maximum length limit of 256 bytes. An MD5 hash function is used to map partition keys to 128-bit integer values and to map associated data records to shards using the hash key ranges of the shards. You can override hashing the partition key to determine the shard by explicitly specifying a hash value using the ExplicitHashKey parameter. For more information, see Partition Key in the Amazon Kinesis Developer Guide PutRecord returns the shard ID of where the data record was placed and the sequence number that was assigned to the data record. Sequence numbers generally increase over time. To guarantee strictly increasing ordering, use the SequenceNumberForOrdering parameter. For more information, see Sequence Number in the Amazon Kinesis Developer Guide If a PutRecord request cannot be processed because of insufficient provisioned throughput on the shard involved in the request, PutRecord throws ProvisionedThroughputExceededException . Data records are accessible for only 24 hours from the time that they are added to an Amazon Kinesis stream.

func (*Kinesis) PutRecords

func (c *Kinesis) PutRecords(req *PutRecordsInput) (resp *PutRecordsOutput, err error)

PutRecords puts (writes) multiple data records from a producer into an Amazon Kinesis stream in a single call (also referred to as a PutRecords request). Use this operation to send data from a data producer into the Amazon Kinesis stream for real-time ingestion and processing. Each shard can support up to 1000 records written per second, up to a maximum total of 1 MB data written per second. You must specify the name of the stream that captures, stores, and transports the data; and an array of request Records , with each record in the array requiring a partition key and data blob. The data blob can be any type of data; for example, a segment from a log file, geographic/location data, website clickstream data, and so on. The partition key is used by Amazon Kinesis as input to a hash function that maps the partition key and associated data to a specific shard. An MD5 hash function is used to map partition keys to 128-bit integer values and to map associated data records to shards. As a result of this hashing mechanism, all data records with the same partition key map to the same shard within the stream. For more information, see Partition Key in the Amazon Kinesis Developer Guide Each record in the Records array may include an optional parameter, ExplicitHashKey , which overrides the partition key to shard mapping. This parameter allows a data producer to determine explicitly the shard where the record is stored. For more information, see Adding Multiple Records with PutRecords in the Amazon Kinesis Developer Guide The PutRecords response includes an array of response Records . Each record in the response array directly correlates with a record in the request array using natural ordering, from the top to the bottom of the request and response. The response Records array always includes the same number of records as the request array. The response Records array includes both successfully and unsuccessfully processed records. Amazon Kinesis attempts to process all records in each PutRecords request. A single record failure does not stop the processing of subsequent records. A successfully-processed record includes ShardId and SequenceNumber values. The ShardId parameter identifies the shard in the stream where the record is stored. The SequenceNumber parameter is an identifier assigned to the put record, unique to all records in the stream. An unsuccessfully-processed record includes ErrorCode and ErrorMessage values. ErrorCode reflects the type of error and can be one of the following values: ProvisionedThroughputExceededException or InternalFailure . ErrorMessage provides more detailed information about the ProvisionedThroughputExceededException exception including the account ID, stream name, and shard ID of the record that was throttled. Data records are accessible for only 24 hours from the time that they are added to an Amazon Kinesis stream.

func (*Kinesis) RemoveTagsFromStream

func (c *Kinesis) RemoveTagsFromStream(req *RemoveTagsFromStreamInput) (err error)

RemoveTagsFromStream deletes tags from the specified Amazon Kinesis stream. If you specify a tag that does not exist, it is ignored.

func (*Kinesis) SplitShard

func (c *Kinesis) SplitShard(req *SplitShardInput) (err error)

SplitShard splits a shard into two new shards in the stream, to increase the stream's capacity to ingest and transport data. SplitShard is called when there is a need to increase the overall capacity of stream because of an expected increase in the volume of data records being ingested. You can also use SplitShard when a shard appears to be approaching its maximum utilization, for example, when the set of producers sending data into the specific shard are suddenly sending more than previously anticipated. You can also call SplitShard to increase stream capacity, so that more Amazon Kinesis applications can simultaneously read data from the stream for real-time processing. You must specify the shard to be split and the new hash key, which is the position in the shard where the shard gets split in two. In many cases, the new hash key might simply be the average of the beginning and ending hash key, but it can be any hash key value in the range being mapped into the shard. For more information about splitting shards, see Split a Shard in the Amazon Kinesis Developer Guide You can use DescribeStream to determine the shard ID and hash key values for the ShardToSplit and NewStartingHashKey parameters that are specified in the SplitShard request. SplitShard is an asynchronous operation. Upon receiving a SplitShard request, Amazon Kinesis immediately returns a response and sets the stream status to . After the operation is completed, Amazon Kinesis sets the stream status to . Read and write operations continue to work while the stream is in the state. You can use DescribeStream to check the status of the stream, which is returned in StreamStatus . If the stream is in the state, you can call SplitShard . If a stream is in or or states, DescribeStream returns a ResourceInUseException If the specified stream does not exist, DescribeStream returns a ResourceNotFoundException . If you try to create more shards than are authorized for your account, you receive a LimitExceededException . The default limit for an AWS account is 10 shards per stream. If you need to create a stream with more than 10 shards, contact AWS Support to increase the limit on your account. If you try to operate on too many streams in parallel using CreateStream , DeleteStream , MergeShards or SplitShard , you receive a LimitExceededException . SplitShard has limit of 5 transactions per second per account.

type ListStreamsInput

type ListStreamsInput struct {
	ExclusiveStartStreamName aws.StringValue  `json:"ExclusiveStartStreamName,omitempty"`
	Limit                    aws.IntegerValue `json:"Limit,omitempty"`
}

ListStreamsInput is undocumented.

type ListStreamsOutput

type ListStreamsOutput struct {
	HasMoreStreams aws.BooleanValue `json:"HasMoreStreams"`
	StreamNames    []string         `json:"StreamNames"`
}

ListStreamsOutput is undocumented.

type ListTagsForStreamInput

type ListTagsForStreamInput struct {
	ExclusiveStartTagKey aws.StringValue  `json:"ExclusiveStartTagKey,omitempty"`
	Limit                aws.IntegerValue `json:"Limit,omitempty"`
	StreamName           aws.StringValue  `json:"StreamName"`
}

ListTagsForStreamInput is undocumented.

type ListTagsForStreamOutput

type ListTagsForStreamOutput struct {
	HasMoreTags aws.BooleanValue `json:"HasMoreTags"`
	Tags        []Tag            `json:"Tags"`
}

ListTagsForStreamOutput is undocumented.

type MergeShardsInput

type MergeShardsInput struct {
	AdjacentShardToMerge aws.StringValue `json:"AdjacentShardToMerge"`
	ShardToMerge         aws.StringValue `json:"ShardToMerge"`
	StreamName           aws.StringValue `json:"StreamName"`
}

MergeShardsInput is undocumented.

type PutRecordInput

type PutRecordInput struct {
	Data                      []byte          `json:"Data"`
	ExplicitHashKey           aws.StringValue `json:"ExplicitHashKey,omitempty"`
	PartitionKey              aws.StringValue `json:"PartitionKey"`
	SequenceNumberForOrdering aws.StringValue `json:"SequenceNumberForOrdering,omitempty"`
	StreamName                aws.StringValue `json:"StreamName"`
}

PutRecordInput is undocumented.

type PutRecordOutput

type PutRecordOutput struct {
	SequenceNumber aws.StringValue `json:"SequenceNumber"`
	ShardID        aws.StringValue `json:"ShardId"`
}

PutRecordOutput is undocumented.

type PutRecordsInput

type PutRecordsInput struct {
	Records    []PutRecordsRequestEntry `json:"Records"`
	StreamName aws.StringValue          `json:"StreamName"`
}

PutRecordsInput is undocumented.

type PutRecordsOutput

type PutRecordsOutput struct {
	FailedRecordCount aws.IntegerValue        `json:"FailedRecordCount,omitempty"`
	Records           []PutRecordsResultEntry `json:"Records"`
}

PutRecordsOutput is undocumented.

type PutRecordsRequestEntry

type PutRecordsRequestEntry struct {
	Data            []byte          `json:"Data"`
	ExplicitHashKey aws.StringValue `json:"ExplicitHashKey,omitempty"`
	PartitionKey    aws.StringValue `json:"PartitionKey"`
}

PutRecordsRequestEntry is undocumented.

type PutRecordsResultEntry

type PutRecordsResultEntry struct {
	ErrorCode      aws.StringValue `json:"ErrorCode,omitempty"`
	ErrorMessage   aws.StringValue `json:"ErrorMessage,omitempty"`
	SequenceNumber aws.StringValue `json:"SequenceNumber,omitempty"`
	ShardID        aws.StringValue `json:"ShardId,omitempty"`
}

PutRecordsResultEntry is undocumented.

type Record

type Record struct {
	Data           []byte          `json:"Data"`
	PartitionKey   aws.StringValue `json:"PartitionKey"`
	SequenceNumber aws.StringValue `json:"SequenceNumber"`
}

Record is undocumented.

type RemoveTagsFromStreamInput

type RemoveTagsFromStreamInput struct {
	StreamName aws.StringValue `json:"StreamName"`
	TagKeys    []string        `json:"TagKeys"`
}

RemoveTagsFromStreamInput is undocumented.

type SequenceNumberRange

type SequenceNumberRange struct {
	EndingSequenceNumber   aws.StringValue `json:"EndingSequenceNumber,omitempty"`
	StartingSequenceNumber aws.StringValue `json:"StartingSequenceNumber"`
}

SequenceNumberRange is undocumented.

type Shard

type Shard struct {
	AdjacentParentShardID aws.StringValue      `json:"AdjacentParentShardId,omitempty"`
	HashKeyRange          *HashKeyRange        `json:"HashKeyRange"`
	ParentShardID         aws.StringValue      `json:"ParentShardId,omitempty"`
	SequenceNumberRange   *SequenceNumberRange `json:"SequenceNumberRange"`
	ShardID               aws.StringValue      `json:"ShardId"`
}

Shard is undocumented.

type SplitShardInput

type SplitShardInput struct {
	NewStartingHashKey aws.StringValue `json:"NewStartingHashKey"`
	ShardToSplit       aws.StringValue `json:"ShardToSplit"`
	StreamName         aws.StringValue `json:"StreamName"`
}

SplitShardInput is undocumented.

type StreamDescription

type StreamDescription struct {
	HasMoreShards aws.BooleanValue `json:"HasMoreShards"`
	Shards        []Shard          `json:"Shards"`
	StreamARN     aws.StringValue  `json:"StreamARN"`
	StreamName    aws.StringValue  `json:"StreamName"`
	StreamStatus  aws.StringValue  `json:"StreamStatus"`
}

StreamDescription is undocumented.

type Tag

type Tag struct {
	Key   aws.StringValue `json:"Key"`
	Value aws.StringValue `json:"Value,omitempty"`
}

Tag is undocumented.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL