v1alpha1

package
v0.0.310 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Jun 15, 2022 License: Apache-2.0 Imports: 8 Imported by: 0

Documentation

Overview

Package v1alpha1 contains API Schema definitions for the devops v1alpha1 API group +k8s:openapi-gen=true +k8s:deepcopy-gen=package,register +k8s:conversion-gen=github.com/hzhhong/kubesphere/pkg/apis/devops +k8s:defaulter-gen=TypeMeta +groupName=devops.kubesphere.io

Package v1alpha1 contains API Schema definitions for the devops v1alpha1 API group +k8s:openapi-gen=true +k8s:deepcopy-gen=package,register +k8s:conversion-gen=github.com/hzhhong/kubesphere/pkg/apis/devops +k8s:defaulter-gen=TypeMeta +groupName=devops.kubesphere.io

Index

Constants

View Source
const (
	ResourceKindS2iBinary     = "S2iBinary"
	ResourceSingularS2iBinary = "s2ibinary"
	ResourcePluralS2iBinary   = "s2ibinaries"
)
View Source
const (
	StatusUploading    = "Uploading"
	StatusReady        = "Ready"
	StatusUploadFailed = "UploadFailed"
)
View Source
const (
	S2iBinaryFinalizerName = "s2ibinary.finalizers.kubesphere.io"
	S2iBinaryLabelKey      = "s2ibinary-name.kubesphere.io"
)
View Source
const (
	ResourceKindS2iBuilder     = "S2iBuilder"
	ResourceSingularS2iBuilder = "s2ibuilder"
	ResourcePluralS2iBuilder   = "s2ibuilders"
)
View Source
const (
	AutoScaleAnnotations             = "devops.kubesphere.io/autoscale"
	S2iRunLabel                      = "devops.kubesphere.io/s2ir"
	S2irCompletedScaleAnnotations    = "devops.kubesphere.io/completedscale"
	WorkLoadCompletedInitAnnotations = "devops.kubesphere.io/inithasbeencomplted"
	S2iRunDoNotAutoScaleAnnotations  = "devops.kubesphere.io/donotautoscale"
	DescriptionAnnotations           = "desc"
)
View Source
const (
	KindDeployment  = "Deployment"
	KindStatefulSet = "StatefulSet"
)
View Source
const (
	// PullAlways means that we always attempt to pull the latest image.
	PullAlways PullPolicy = "always"

	// PullNever means that we never pull an image, but only use a local image.
	PullNever PullPolicy = "never"

	// PullIfNotPresent means that we pull if the image isn't present on disk.
	PullIfNotPresent PullPolicy = "if-not-present"

	// DefaultBuilderPullPolicy specifies the default pull policy to use
	DefaultBuilderPullPolicy = PullIfNotPresent

	// DefaultRuntimeImagePullPolicy specifies the default pull policy to use.
	DefaultRuntimeImagePullPolicy = PullIfNotPresent

	// DefaultPreviousImagePullPolicy specifies policy for pulling the previously
	// build Docker image when doing incremental build
	DefaultPreviousImagePullPolicy = PullIfNotPresent
)
View Source
const (
	// DockerNetworkModeHost places the container in the default (host) network namespace.
	DockerNetworkModeHost DockerNetworkMode = "host"
	// DockerNetworkModeBridge instructs docker to create a network namespace for this container connected to the docker0 bridge via a veth-pair.
	DockerNetworkModeBridge DockerNetworkMode = "bridge"
	// DockerNetworkModeContainerPrefix is the string prefix used by NewDockerNetworkModeContainer.
	DockerNetworkModeContainerPrefix string = "container:"
	// DockerNetworkModeNetworkNamespacePrefix is the string prefix used when sharing a namespace from a CRI-O container.
	DockerNetworkModeNetworkNamespacePrefix string = "netns:"
)
View Source
const (
	ResourceKindS2iBuilderTemplate     = "S2iBuilderTemplate"
	ResourceSingularS2iBuilderTemplate = "s2ibuildertemplate"
	ResourcePluralS2iBuilderTemplate   = "s2ibuildertemplates"
)
View Source
const (
	ResourceKindS2iRun     = "S2iRun"
	ResourceSingularS2iRun = "s2irun"
	ResourcePluralS2iRun   = "s2iruns"
)

Variables

View Source
var (
	// SchemeGroupVersion is group version used to register these objects
	SchemeGroupVersion = schema.GroupVersion{Group: "devops.kubesphere.io", Version: "v1alpha1"}

	// SchemeBuilder is used to add go types to the GroupVersionKind scheme
	SchemeBuilder = &scheme.Builder{GroupVersion: SchemeGroupVersion}

	// AddToScheme is required by pkg/client/...
	AddToScheme = SchemeBuilder.AddToScheme
)

Functions

func Resource

func Resource(resource string) schema.GroupResource

Resource is required by pkg/client/listers/...

Types

type AuthConfig

type AuthConfig struct {
	Username      string                       `json:"username,omitempty"`
	Password      string                       `json:"password,omitempty"`
	Email         string                       `json:"email,omitempty"`
	ServerAddress string                       `json:"serverAddress,omitempty"`
	SecretRef     *corev1.LocalObjectReference `json:"secretRef,omitempty"`
}

AuthConfig is our abstraction of the Registry authorization information for whatever docker client we happen to be based on

func (*AuthConfig) DeepCopy

func (in *AuthConfig) DeepCopy() *AuthConfig

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new AuthConfig.

func (*AuthConfig) DeepCopyInto

func (in *AuthConfig) DeepCopyInto(out *AuthConfig)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

type CGroupLimits

type CGroupLimits struct {
	MemoryLimitBytes int64  `json:"memoryLimitBytes"`
	CPUShares        int64  `json:"cpuShares"`
	CPUPeriod        int64  `json:"cpuPeriod"`
	CPUQuota         int64  `json:"cpuQuota"`
	MemorySwap       int64  `json:"memorySwap"`
	Parent           string `json:"parent"`
}

CGroupLimits holds limits used to constrain container resources.

func (*CGroupLimits) DeepCopy

func (in *CGroupLimits) DeepCopy() *CGroupLimits

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new CGroupLimits.

func (*CGroupLimits) DeepCopyInto

func (in *CGroupLimits) DeepCopyInto(out *CGroupLimits)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

type CodeFramework

type CodeFramework string
const (
	Ruby       CodeFramework = "ruby"
	Go         CodeFramework = "go"
	Java       CodeFramework = "Java"
	JavaTomcat CodeFramework = "JavaTomcat"
	Nodejs     CodeFramework = "Nodejs"
	Python     CodeFramework = "python"
)

type ContainerConfig

type ContainerConfig struct {
	Labels map[string]string
	Env    []string
}

ContainerConfig is the abstraction of the docker client provider (formerly go-dockerclient, now either engine-api or kube docker client) container.Config type that is leveraged by s2i or origin

func (*ContainerConfig) DeepCopy

func (in *ContainerConfig) DeepCopy() *ContainerConfig

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new ContainerConfig.

func (*ContainerConfig) DeepCopyInto

func (in *ContainerConfig) DeepCopyInto(out *ContainerConfig)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

type ContainerInfo

type ContainerInfo struct {
	//BaseImage are the images this template will use.
	BuilderImage     string       `json:"builderImage,omitempty"`
	RuntimeImage     string       `json:"runtimeImage,omitempty"`
	RuntimeArtifacts []VolumeSpec `json:"runtimeArtifacts,omitempty"`
	// BuildVolumes specifies a list of volumes to mount to container running the
	// build.
	BuildVolumes []string `json:"buildVolumes,omitempty"`
}

func (*ContainerInfo) DeepCopy

func (in *ContainerInfo) DeepCopy() *ContainerInfo

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new ContainerInfo.

func (*ContainerInfo) DeepCopyInto

func (in *ContainerInfo) DeepCopyInto(out *ContainerInfo)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

type DockerConfig

type DockerConfig struct {
	// Endpoint is the docker network endpoint or socket
	Endpoint string `json:"endPoint"`

	// CertFile is the certificate file path for a TLS connection
	CertFile string `json:"certFile"`

	// KeyFile is the key file path for a TLS connection
	KeyFile string `json:"keyFile"`

	// CAFile is the certificate authority file path for a TLS connection
	CAFile string `json:"caFile"`

	// UseTLS indicates if TLS must be used
	UseTLS bool `json:"useTLS"`

	// TLSVerify indicates if TLS peer must be verified
	TLSVerify bool `json:"tlsVerify"`
}

DockerConfig contains the configuration for a Docker connection.

func (*DockerConfig) DeepCopy

func (in *DockerConfig) DeepCopy() *DockerConfig

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new DockerConfig.

func (*DockerConfig) DeepCopyInto

func (in *DockerConfig) DeepCopyInto(out *DockerConfig)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

type DockerConfigEntry

type DockerConfigEntry struct {
	Username      string `json:"username"`
	Password      string `json:"password"`
	Email         string `json:"email"`
	ServerAddress string `json:"serverAddress,omitempty"`
}

func (*DockerConfigEntry) DeepCopy

func (in *DockerConfigEntry) DeepCopy() *DockerConfigEntry

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new DockerConfigEntry.

func (*DockerConfigEntry) DeepCopyInto

func (in *DockerConfigEntry) DeepCopyInto(out *DockerConfigEntry)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

type DockerConfigJson

type DockerConfigJson struct {
	Auths DockerConfigMap `json:"auths"`
}

func (*DockerConfigJson) DeepCopy

func (in *DockerConfigJson) DeepCopy() *DockerConfigJson

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new DockerConfigJson.

func (*DockerConfigJson) DeepCopyInto

func (in *DockerConfigJson) DeepCopyInto(out *DockerConfigJson)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

type DockerConfigMap

type DockerConfigMap map[string]DockerConfigEntry

DockerConfig represents the config file used by the docker CLI. This config that represents the credentials that should be used when pulling images from specific image repositories.

func (DockerConfigMap) DeepCopy

func (in DockerConfigMap) DeepCopy() DockerConfigMap

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new DockerConfigMap.

func (DockerConfigMap) DeepCopyInto

func (in DockerConfigMap) DeepCopyInto(out *DockerConfigMap)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

type DockerNetworkMode

type DockerNetworkMode string

DockerNetworkMode specifies the network mode setting for the docker container

func NewDockerNetworkModeContainer

func NewDockerNetworkModeContainer(id string) DockerNetworkMode

NewDockerNetworkModeContainer creates a DockerNetworkMode value which instructs docker to place the container in the network namespace of an existing container. It can be used, for instance, to place the s2i container in the network namespace of the infrastructure container of a k8s pod.

type EnvironmentSpec

type EnvironmentSpec struct {
	Name  string `json:"name"`
	Value string `json:"value"`
}

EnvironmentSpec specifies a single environment variable.

func (*EnvironmentSpec) DeepCopy

func (in *EnvironmentSpec) DeepCopy() *EnvironmentSpec

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new EnvironmentSpec.

func (*EnvironmentSpec) DeepCopyInto

func (in *EnvironmentSpec) DeepCopyInto(out *EnvironmentSpec)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

type Parameter

type Parameter struct {
	Description  string   `json:"description,omitempty"`
	Key          string   `json:"key,omitempty"`
	Type         string   `json:"type,omitempty"`
	OptValues    []string `json:"optValues,omitempty"`
	Required     bool     `json:"required,omitempty"`
	DefaultValue string   `json:"defaultValue,omitempty"`
	Value        string   `json:"value,omitempty"`
}

func (*Parameter) DeepCopy

func (in *Parameter) DeepCopy() *Parameter

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new Parameter.

func (*Parameter) DeepCopyInto

func (in *Parameter) DeepCopyInto(out *Parameter)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

func (*Parameter) ToEnvonment

func (p *Parameter) ToEnvonment() *EnvironmentSpec

type ProxyConfig

type ProxyConfig struct {
	HTTPProxy  string `json:"httpProxy,omitempty"`
	HTTPSProxy string `json:"httpsProxy,omitempty"`
}

ProxyConfig holds proxy configuration.

func (*ProxyConfig) DeepCopy

func (in *ProxyConfig) DeepCopy() *ProxyConfig

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new ProxyConfig.

func (*ProxyConfig) DeepCopyInto

func (in *ProxyConfig) DeepCopyInto(out *ProxyConfig)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

type PullPolicy

type PullPolicy string

func (*PullPolicy) Set

func (p *PullPolicy) Set(v string) error

Set implements the Set() function of pflags.Value interface The valid options are "always", "never" or "if-not-present"

func (*PullPolicy) String

func (p *PullPolicy) String() string

String implements the String() function of pflags.Value so this can be used as command line parameter. This method is really used just to show the default value when printing help. It will not default the configuration.

func (*PullPolicy) Type

func (p *PullPolicy) Type() string

Type implements the Type() function of pflags.Value interface

type RunState

type RunState string
const (
	NotRunning RunState = "Not Running Yet"
	Running    RunState = "Running"
	Successful RunState = "Successful"
	Failed     RunState = "Failed"
	Unknown    RunState = "Unknown"
)

type S2iAutoScale

type S2iAutoScale struct {
	Kind         string   `json:"kind"`
	Name         string   `json:"name"`
	InitReplicas *int32   `json:"initReplicas,omitempty"`
	Containers   []string `json:"containers,omitempty"`
}

func (*S2iAutoScale) DeepCopy

func (in *S2iAutoScale) DeepCopy() *S2iAutoScale

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new S2iAutoScale.

func (*S2iAutoScale) DeepCopyInto

func (in *S2iAutoScale) DeepCopyInto(out *S2iAutoScale)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

type S2iBinary

type S2iBinary struct {
	metav1.TypeMeta   `json:",inline"`
	metav1.ObjectMeta `json:"metadata,omitempty"`

	Spec   S2iBinarySpec   `json:"spec,omitempty"`
	Status S2iBinaryStatus `json:"status,omitempty"`
}

S2iBinary is the Schema for the s2ibinaries API +k8s:openapi-gen=true +kubebuilder:printcolumn:name="FileName",type="string",JSONPath=".spec.fileName" +kubebuilder:printcolumn:name="MD5",type="string",JSONPath=".spec.md5" +kubebuilder:printcolumn:name="Size",type="string",JSONPath=".spec.size" +kubebuilder:printcolumn:name="Phase",type="string",JSONPath=".status.phase"

func (*S2iBinary) DeepCopy

func (in *S2iBinary) DeepCopy() *S2iBinary

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new S2iBinary.

func (*S2iBinary) DeepCopyInto

func (in *S2iBinary) DeepCopyInto(out *S2iBinary)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

func (*S2iBinary) DeepCopyObject

func (in *S2iBinary) DeepCopyObject() runtime.Object

DeepCopyObject is an autogenerated deepcopy function, copying the receiver, creating a new runtime.Object.

type S2iBinaryList

type S2iBinaryList struct {
	metav1.TypeMeta `json:",inline"`
	metav1.ListMeta `json:"metadata,omitempty"`
	Items           []S2iBinary `json:"items"`
}

S2iBinaryList contains a list of S2iBinary

func (*S2iBinaryList) DeepCopy

func (in *S2iBinaryList) DeepCopy() *S2iBinaryList

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new S2iBinaryList.

func (*S2iBinaryList) DeepCopyInto

func (in *S2iBinaryList) DeepCopyInto(out *S2iBinaryList)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

func (*S2iBinaryList) DeepCopyObject

func (in *S2iBinaryList) DeepCopyObject() runtime.Object

DeepCopyObject is an autogenerated deepcopy function, copying the receiver, creating a new runtime.Object.

type S2iBinarySpec

type S2iBinarySpec struct {
	//FileName is filename of binary
	FileName string `json:"fileName,omitempty"`
	//MD5 is Binary's MD5 Hash
	MD5 string `json:"md5,omitempty"`
	//Size is the file size of file
	Size string `json:"size,omitempty"`
	//DownloadURL in KubeSphere
	DownloadURL string `json:"downloadURL,omitempty"`
	// UploadTime is last upload time
	UploadTimeStamp *metav1.Time `json:"uploadTimeStamp,omitempty"`
}

S2iBinarySpec defines the desired state of S2iBinary

func (*S2iBinarySpec) DeepCopy

func (in *S2iBinarySpec) DeepCopy() *S2iBinarySpec

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new S2iBinarySpec.

func (*S2iBinarySpec) DeepCopyInto

func (in *S2iBinarySpec) DeepCopyInto(out *S2iBinarySpec)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

type S2iBinaryStatus

type S2iBinaryStatus struct {
	//Phase is status of S2iBinary . Possible value is "Ready","UnableToDownload"
	Phase string `json:"phase,omitempty"`
}

S2iBinaryStatus defines the observed state of S2iBinary

func (*S2iBinaryStatus) DeepCopy

func (in *S2iBinaryStatus) DeepCopy() *S2iBinaryStatus

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new S2iBinaryStatus.

func (*S2iBinaryStatus) DeepCopyInto

func (in *S2iBinaryStatus) DeepCopyInto(out *S2iBinaryStatus)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

type S2iBuildResult

type S2iBuildResult struct {
	//ImageName is the name of artifact
	ImageName string `json:"imageName,omitempty"`
	//The size in bytes of the image
	ImageSize int64 `json:"imageSize,omitempty"`
	// Image ID.
	ImageID string `json:"imageID,omitempty"`
	// Image created time.
	ImageCreated string `json:"imageCreated,omitempty"`
	// image tags.
	ImageRepoTags []string `json:"imageRepoTags,omitempty"`
	// Command for pull image.
	CommandPull string `json:"commandPull,omitempty"`
}

func (*S2iBuildResult) DeepCopy

func (in *S2iBuildResult) DeepCopy() *S2iBuildResult

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new S2iBuildResult.

func (*S2iBuildResult) DeepCopyInto

func (in *S2iBuildResult) DeepCopyInto(out *S2iBuildResult)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

type S2iBuildSource

type S2iBuildSource struct {
	// SourceURL is  url of the codes such as https://github.com/a/b.git
	SourceUrl string `json:"sourceUrl,omitempty"`
	// The RevisionId is a branch name or a SHA-1 hash of every important thing about the commit
	RevisionId string `json:"revisionId,omitempty"`
	// Binary file Name
	BinaryName string `json:"binaryName,omitempty"`
	// Binary file Size
	BinarySize uint64 `json:"binarySize,omitempty"`

	// // BuilderImage describes which image is used for building the result images.
	BuilderImage string `json:"builderImage,omitempty"`
	// Description is a result image description label. The default is no
	// description.
	Description string `json:"description,omitempty"`

	// CommitID represents an arbitrary extended object reference in Git as SHA-1
	CommitID string `json:"commitID,omitempty"`
	// CommitterName contains the name of the committer
	CommitterName string `json:"committerName,omitempty"`
	// CommitterEmail contains the e-mail of the committer
	CommitterEmail string `json:"committerEmail,omitempty"`
}

func (*S2iBuildSource) DeepCopy

func (in *S2iBuildSource) DeepCopy() *S2iBuildSource

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new S2iBuildSource.

func (*S2iBuildSource) DeepCopyInto

func (in *S2iBuildSource) DeepCopyInto(out *S2iBuildSource)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

type S2iBuilder

type S2iBuilder struct {
	metav1.TypeMeta   `json:",inline"`
	metav1.ObjectMeta `json:"metadata,omitempty"`

	Spec   S2iBuilderSpec   `json:"spec,omitempty"`
	Status S2iBuilderStatus `json:"status,omitempty"`
}

S2iBuilder is the Schema for the s2ibuilders API +k8s:openapi-gen=true +kubebuilder:subresource:status +kubebuilder:printcolumn:name="RunCount",type="integer",JSONPath=".status.runCount" +kubebuilder:printcolumn:name="LastRunState",type="string",JSONPath=".status.lastRunState" +kubebuilder:printcolumn:name="LastRunName",type="string",JSONPath=".status.lastRunName" +kubebuilder:printcolumn:name="LastRunStartTime",type="date",JSONPath=".status.lastRunStartTime" +kubebuilder:resource:shortName=s2ib

func (*S2iBuilder) DeepCopy

func (in *S2iBuilder) DeepCopy() *S2iBuilder

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new S2iBuilder.

func (*S2iBuilder) DeepCopyInto

func (in *S2iBuilder) DeepCopyInto(out *S2iBuilder)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

func (*S2iBuilder) DeepCopyObject

func (in *S2iBuilder) DeepCopyObject() runtime.Object

DeepCopyObject is an autogenerated deepcopy function, copying the receiver, creating a new runtime.Object.

type S2iBuilderList

type S2iBuilderList struct {
	metav1.TypeMeta `json:",inline"`
	metav1.ListMeta `json:"metadata,omitempty"`
	Items           []S2iBuilder `json:"items"`
}

S2iBuilderList contains a list of S2iBuilder

func (*S2iBuilderList) DeepCopy

func (in *S2iBuilderList) DeepCopy() *S2iBuilderList

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new S2iBuilderList.

func (*S2iBuilderList) DeepCopyInto

func (in *S2iBuilderList) DeepCopyInto(out *S2iBuilderList)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

func (*S2iBuilderList) DeepCopyObject

func (in *S2iBuilderList) DeepCopyObject() runtime.Object

DeepCopyObject is an autogenerated deepcopy function, copying the receiver, creating a new runtime.Object.

type S2iBuilderSpec

type S2iBuilderSpec struct {
	// INSERT ADDITIONAL SPEC FIELDS - desired state of cluster
	// Important: Run "make" to regenerate code after modifying this file
	Config *S2iConfig `json:"config,omitempty"`
	//FromTemplate define some inputs from user
	FromTemplate *UserDefineTemplate `json:"fromTemplate,omitempty"`
}

S2iBuilderSpec defines the desired state of S2iBuilder

func (*S2iBuilderSpec) DeepCopy

func (in *S2iBuilderSpec) DeepCopy() *S2iBuilderSpec

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new S2iBuilderSpec.

func (*S2iBuilderSpec) DeepCopyInto

func (in *S2iBuilderSpec) DeepCopyInto(out *S2iBuilderSpec)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

type S2iBuilderStatus

type S2iBuilderStatus struct {
	//RunCount represent the sum of s2irun of this builder
	RunCount int `json:"runCount"`
	//LastRunState return the state of the newest run of this builder
	LastRunState RunState `json:"lastRunState,omitempty"`
	//LastRunState return the name of the newest run of this builder
	LastRunName *string `json:"lastRunName,omitempty"`
	//LastRunStartTime return the startTime of the newest run of this builder
	LastRunStartTime *metav1.Time `json:"lastRunStartTime,omitempty"`
}

S2iBuilderStatus defines the observed state of S2iBuilder

func (*S2iBuilderStatus) DeepCopy

func (in *S2iBuilderStatus) DeepCopy() *S2iBuilderStatus

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new S2iBuilderStatus.

func (*S2iBuilderStatus) DeepCopyInto

func (in *S2iBuilderStatus) DeepCopyInto(out *S2iBuilderStatus)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

type S2iBuilderTemplate

type S2iBuilderTemplate struct {
	metav1.TypeMeta   `json:",inline"`
	metav1.ObjectMeta `json:"metadata,omitempty"`

	Spec   S2iBuilderTemplateSpec   `json:"spec,omitempty"`
	Status S2iBuilderTemplateStatus `json:"status,omitempty"`
}

S2iBuilderTemplate is the Schema for the s2ibuildertemplates API +k8s:openapi-gen=true +kubebuilder:printcolumn:name="Framework",type="string",JSONPath=".spec.codeFramework" +kubebuilder:printcolumn:name="DefaultBaseImage",type="string",JSONPath=".spec.defaultBaseImage" +kubebuilder:printcolumn:name="Version",type="string",JSONPath=".spec.version" +kubebuilder:resource:categories="devops",scope="Cluster",shortName="s2ibt"

func (*S2iBuilderTemplate) DeepCopy

func (in *S2iBuilderTemplate) DeepCopy() *S2iBuilderTemplate

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new S2iBuilderTemplate.

func (*S2iBuilderTemplate) DeepCopyInto

func (in *S2iBuilderTemplate) DeepCopyInto(out *S2iBuilderTemplate)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

func (*S2iBuilderTemplate) DeepCopyObject

func (in *S2iBuilderTemplate) DeepCopyObject() runtime.Object

DeepCopyObject is an autogenerated deepcopy function, copying the receiver, creating a new runtime.Object.

type S2iBuilderTemplateList

type S2iBuilderTemplateList struct {
	metav1.TypeMeta `json:",inline"`
	metav1.ListMeta `json:"metadata,omitempty"`
	Items           []S2iBuilderTemplate `json:"items"`
}

S2iBuilderTemplateList contains a list of S2iBuilderTemplate

func (*S2iBuilderTemplateList) DeepCopy

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new S2iBuilderTemplateList.

func (*S2iBuilderTemplateList) DeepCopyInto

func (in *S2iBuilderTemplateList) DeepCopyInto(out *S2iBuilderTemplateList)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

func (*S2iBuilderTemplateList) DeepCopyObject

func (in *S2iBuilderTemplateList) DeepCopyObject() runtime.Object

DeepCopyObject is an autogenerated deepcopy function, copying the receiver, creating a new runtime.Object.

type S2iBuilderTemplateSpec

type S2iBuilderTemplateSpec struct {
	//DefaultBaseImage is the image that will be used by default
	DefaultBaseImage string `json:"defaultBaseImage,omitempty"`
	//Images are the images this template will use.
	ContainerInfo []ContainerInfo `json:"containerInfo,omitempty"`
	//CodeFramework means which language this template is designed for and which framework is using if has framework. Like Java, NodeJS etc
	CodeFramework CodeFramework `json:"codeFramework,omitempty"`
	// Parameters is a set of environment variables to be passed to the image.
	Parameters []Parameter `json:"environment,omitempty"`
	// Version of template
	Version string `json:"version,omitempty"`
	// Description illustrate the purpose of this template
	Description string `json:"description,omitempty"`
	// IconPath is used for frontend display
	IconPath string `json:"iconPath,omitempty"`
}

S2iBuilderTemplateSpec defines the desired state of S2iBuilderTemplate

func (*S2iBuilderTemplateSpec) DeepCopy

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new S2iBuilderTemplateSpec.

func (*S2iBuilderTemplateSpec) DeepCopyInto

func (in *S2iBuilderTemplateSpec) DeepCopyInto(out *S2iBuilderTemplateSpec)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

type S2iBuilderTemplateStatus

type S2iBuilderTemplateStatus struct {
}

S2iBuilderTemplateStatus defines the observed state of S2iBuilderTemplate

func (*S2iBuilderTemplateStatus) DeepCopy

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new S2iBuilderTemplateStatus.

func (*S2iBuilderTemplateStatus) DeepCopyInto

func (in *S2iBuilderTemplateStatus) DeepCopyInto(out *S2iBuilderTemplateStatus)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

type S2iConfig

type S2iConfig struct {
	// DisplayName is a result image display-name label. This defaults to the
	// output image name.
	DisplayName string `json:"displayName,omitempty"`

	// Description is a result image description label. The default is no
	// description.
	Description string `json:"description,omitempty"`

	// BuilderImage describes which image is used for building the result images.
	BuilderImage string `json:"builderImage,omitempty"`

	// BuilderImageVersion provides optional version information about the builder image.
	BuilderImageVersion string `json:"builderImageVersion,omitempty"`

	// BuilderBaseImageVersion provides optional version information about the builder base image.
	BuilderBaseImageVersion string `json:"builderBaseImageVersion,omitempty"`

	// RuntimeImage specifies the image that will be a base for resulting image
	// and will be used for running an application. By default, BuilderImage is
	// used for building and running, but the latter may be overridden.
	RuntimeImage string `json:"runtimeImage,omitempty"`

	//OutputImageName is a result image name without tag, default is latest. tag will append to ImageName in the end
	OutputImageName string `json:"outputImageName,omitempty"`
	// RuntimeImagePullPolicy specifies when to pull a runtime image.
	RuntimeImagePullPolicy PullPolicy `json:"runtimeImagePullPolicy,omitempty"`

	// RuntimeAuthentication holds the authentication information for pulling the
	// runtime Docker images from private repositories.
	RuntimeAuthentication *AuthConfig `json:"runtimeAuthentication,omitempty"`

	// RuntimeArtifacts specifies a list of source/destination pairs that will
	// be copied from builder to a runtime image. Source can be a file or
	// directory. Destination must be a directory. Regardless whether it
	// is an absolute or relative path, it will be placed into image's WORKDIR.
	// Destination also can be empty or equals to ".", in this case it just
	// refers to a root of WORKDIR.
	// In case it's empty, S2I will try to get this list from
	// io.openshift.s2i.assemble-input-files label on a RuntimeImage.
	RuntimeArtifacts []VolumeSpec `json:"runtimeArtifacts,omitempty"`

	// DockerConfig describes how to access host docker daemon.
	DockerConfig *DockerConfig `json:"dockerConfig,omitempty"`

	// PullAuthentication holds the authentication information for pulling the
	// Docker images from private repositories
	PullAuthentication *AuthConfig `json:"pullAuthentication,omitempty"`

	// PullAuthentication holds the authentication information for pulling the
	// Docker images from private repositories
	PushAuthentication *AuthConfig `json:"pushAuthentication,omitempty"`

	// IncrementalAuthentication holds the authentication information for pulling the
	// previous image from private repositories
	IncrementalAuthentication *AuthConfig `json:"incrementalAuthentication,omitempty"`

	// DockerNetworkMode is used to set the docker network setting to --net=container:<id>
	// when the builder is invoked from a container.
	DockerNetworkMode DockerNetworkMode `json:"dockerNetworkMode,omitempty"`

	// PreserveWorkingDir describes if working directory should be left after processing.
	PreserveWorkingDir bool `json:"preserveWorkingDir,omitempty"`

	//ImageName Contains the registry address and reponame, tag should set by field tag alone
	ImageName string `json:"imageName"`
	// Tag is a result image tag name.
	Tag string `json:"tag,omitempty"`

	// BuilderPullPolicy specifies when to pull the builder image
	BuilderPullPolicy PullPolicy `json:"builderPullPolicy,omitempty"`

	// PreviousImagePullPolicy specifies when to pull the previously build image
	// when doing incremental build
	PreviousImagePullPolicy PullPolicy `json:"previousImagePullPolicy,omitempty"`

	// Incremental describes whether to try to perform incremental build.
	Incremental bool `json:"incremental,omitempty"`

	// IncrementalFromTag sets an alternative image tag to look for existing
	// artifacts. Tag is used by default if this is not set.
	IncrementalFromTag string `json:"incrementalFromTag,omitempty"`

	// RemovePreviousImage describes if previous image should be removed after successful build.
	// This applies only to incremental builds.
	RemovePreviousImage bool `json:"removePreviousImage,omitempty"`

	// Environment is a map of environment variables to be passed to the image.
	Environment []EnvironmentSpec `json:"environment,omitempty"`

	// LabelNamespace provides the namespace under which the labels will be generated.
	LabelNamespace string `json:"labelNamespace,omitempty"`

	// CallbackURL is a URL which is called upon successful build to inform about that fact.
	CallbackURL string `json:"callbackUrl,omitempty"`

	// ScriptsURL is a URL describing where to fetch the S2I scripts from during build process.
	// This url can be a reference within the builder image if the scheme is specified as image://
	ScriptsURL string `json:"scriptsUrl,omitempty"`

	// Destination specifies a location where the untar operation will place its artifacts.
	Destination string `json:"destination,omitempty"`

	// WorkingDir describes temporary directory used for downloading sources, scripts and tar operations.
	WorkingDir string `json:"workingDir,omitempty"`

	// WorkingSourceDir describes the subdirectory off of WorkingDir set up during the repo download
	// that is later used as the root for ignore processing
	WorkingSourceDir string `json:"workingSourceDir,omitempty"`

	// LayeredBuild describes if this is build which layered scripts and sources on top of BuilderImage.
	LayeredBuild bool `json:"layeredBuild,omitempty"`

	// Specify a relative directory inside the application repository that should
	// be used as a root directory for the application.
	ContextDir string `json:"contextDir,omitempty"`

	// AssembleUser specifies the user to run the assemble script in container
	AssembleUser string `json:"assembleUser,omitempty"`

	// RunImage will trigger a "docker run ..." invocation of the produced image so the user
	// can see if it operates as he would expect
	RunImage bool `json:"runImage,omitempty"`

	// Usage allows for properly shortcircuiting s2i logic when `s2i usage` is invoked
	Usage bool `json:"usage,omitempty"`

	// Injections specifies a list source/destination folders that are injected to
	// the container that runs assemble.
	// All files we inject will be truncated after the assemble script finishes.
	Injections []VolumeSpec `json:"injections,omitempty"`

	// CGroupLimits describes the cgroups limits that will be applied to any containers
	// run by s2i.
	CGroupLimits *CGroupLimits `json:"cgroupLimits,omitempty"`

	// DropCapabilities contains a list of capabilities to drop when executing containers
	DropCapabilities []string `json:"dropCapabilities,omitempty"`

	// ScriptDownloadProxyConfig optionally specifies the http and https proxy
	// to use when downloading scripts
	ScriptDownloadProxyConfig *ProxyConfig `json:"scriptDownloadProxyConfig,omitempty"`

	// ExcludeRegExp contains a string representation of the regular expression desired for
	// deciding which files to exclude from the tar stream
	ExcludeRegExp string `json:"excludeRegExp,omitempty"`

	// BlockOnBuild prevents s2i from performing a docker build operation
	// if one is necessary to execute ONBUILD commands, or to layer source code into
	// the container for images that don't have a tar binary available, if the
	// image contains ONBUILD commands that would be executed.
	BlockOnBuild bool `json:"blockOnBuild,omitempty"`

	// HasOnBuild will be set to true if the builder image contains ONBUILD instructions
	HasOnBuild bool `json:"hasOnBuild,omitempty"`

	// BuildVolumes specifies a list of volumes to mount to container running the
	// build.
	BuildVolumes []string `json:"buildVolumes,omitempty"`

	// Labels specify labels and their values to be applied to the resulting image. Label keys
	// must have non-zero length. The labels defined here override generated labels in case
	// they have the same name.
	Labels map[string]string `json:"labels,omitempty"`

	// SecurityOpt are passed as options to the docker containers launched by s2i.
	SecurityOpt []string `json:"securityOpt,omitempty"`

	// KeepSymlinks indicates to copy symlinks as symlinks. Default behavior is to follow
	// symlinks and copy files by content.
	KeepSymlinks bool `json:"keepSymlinks,omitempty"`

	// AsDockerfile indicates the path where the Dockerfile should be written instead of building
	// a new image.
	AsDockerfile string `json:"asDockerfile,omitempty"`

	// ImageWorkDir is the default working directory for the builder image.
	ImageWorkDir string `json:"imageWorkDir,omitempty"`

	// ImageScriptsURL is the default location to find the assemble/run scripts for a builder image.
	// This url can be a reference within the builder image if the scheme is specified as image://
	ImageScriptsURL string `json:"imageScriptsUrl,omitempty"`

	// AddHost Add a line to /etc/hosts for test purpose or private use in LAN. Its format is host:IP,muliple hosts can be added  by using multiple --add-host
	AddHost []string `json:"addHost,omitempty"`

	// Export Push the result image to specify image registry in tag
	Export bool `json:"export,omitempty"`

	// SourceURL is  url of the codes such as https://github.com/a/b.git
	SourceURL string `json:"sourceUrl"`

	// IsBinaryURL explain the type of SourceURL.
	// If it is IsBinaryURL, it will download the file directly without using git.
	IsBinaryURL bool `json:"isBinaryURL,omitempty"`

	// GitSecretRef is the BasicAuth Secret of Git Clone
	GitSecretRef *corev1.LocalObjectReference `json:"gitSecretRef,omitempty"`

	// The RevisionId is a branch name or a SHA-1 hash of every important thing about the commit
	RevisionId string `json:"revisionId,omitempty"`

	// The name of taint.
	TaintKey string `json:"taintKey,omitempty"`

	// The key of Node Affinity.
	NodeAffinityKey string `json:"nodeAffinityKey,omitempty"`

	// The values of Node Affinity.
	NodeAffinityValues []string `json:"nodeAffinityValues,omitempty"`

	// Whether output build result to status.
	OutputBuildResult bool `json:"outputBuildResult,omitempty"`

	// Regular expressions, ignoring names that do not match the provided regular expression
	BranchExpression string `json:"branchExpression,omitempty"`

	// SecretCode
	SecretCode string `json:"secretCode,omitempty"`
}

func (*S2iConfig) DeepCopy

func (in *S2iConfig) DeepCopy() *S2iConfig

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new S2iConfig.

func (*S2iConfig) DeepCopyInto

func (in *S2iConfig) DeepCopyInto(out *S2iConfig)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

type S2iRun

type S2iRun struct {
	metav1.TypeMeta   `json:",inline"`
	metav1.ObjectMeta `json:"metadata,omitempty"`

	Spec   S2iRunSpec   `json:"spec,omitempty"`
	Status S2iRunStatus `json:"status,omitempty"`
}

S2iRun is the Schema for the s2iruns API +k8s:openapi-gen=true +kubebuilder:subresource:status +kubebuilder:resource:shortName=s2ir +kubebuilder:printcolumn:name="State",type="string",JSONPath=".status.runState" +kubebuilder:printcolumn:name="K8sJobName",type="string",JSONPath=".status.kubernetesJobName" +kubebuilder:printcolumn:name="StartTime",type="date",JSONPath=".status.startTime" +kubebuilder:printcolumn:name="CompletionTime",type="date",JSONPath=".status.completionTime" +kubebuilder:printcolumn:name="ImageName",type="string",JSONPath=".status.s2iBuildResult.imageName"

func (*S2iRun) DeepCopy

func (in *S2iRun) DeepCopy() *S2iRun

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new S2iRun.

func (*S2iRun) DeepCopyInto

func (in *S2iRun) DeepCopyInto(out *S2iRun)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

func (*S2iRun) DeepCopyObject

func (in *S2iRun) DeepCopyObject() runtime.Object

DeepCopyObject is an autogenerated deepcopy function, copying the receiver, creating a new runtime.Object.

type S2iRunList

type S2iRunList struct {
	metav1.TypeMeta `json:",inline"`
	metav1.ListMeta `json:"metadata,omitempty"`
	Items           []S2iRun `json:"items"`
}

S2iRunList contains a list of S2iRun

func (*S2iRunList) DeepCopy

func (in *S2iRunList) DeepCopy() *S2iRunList

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new S2iRunList.

func (*S2iRunList) DeepCopyInto

func (in *S2iRunList) DeepCopyInto(out *S2iRunList)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

func (*S2iRunList) DeepCopyObject

func (in *S2iRunList) DeepCopyObject() runtime.Object

DeepCopyObject is an autogenerated deepcopy function, copying the receiver, creating a new runtime.Object.

type S2iRunSpec

type S2iRunSpec struct {
	//BuilderName specify the name of s2ibuilder, required
	BuilderName string `json:"builderName"`
	//BackoffLimit limits the restart count of each s2irun. Default is 0
	BackoffLimit int32 `json:"backoffLimit,omitempty"`
	//SecondsAfterFinished if is set and greater than zero, and the job created by s2irun become successful or failed , the job will be auto deleted after SecondsAfterFinished
	SecondsAfterFinished int32 `json:"secondsAfterFinished,omitempty"`
	//NewTag override the default tag in its s2ibuilder, image name cannot be changed.
	NewTag string `json:"newTag,omitempty"`
	//NewRevisionId override the default NewRevisionId in its s2ibuilder.
	NewRevisionId string `json:"newRevisionId,omitempty"`
	//NewSourceURL is used to download new binary artifacts
	NewSourceURL string `json:"newSourceURL,omitempty"`
}

S2iRunSpec defines the desired state of S2iRun

func (*S2iRunSpec) DeepCopy

func (in *S2iRunSpec) DeepCopy() *S2iRunSpec

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new S2iRunSpec.

func (*S2iRunSpec) DeepCopyInto

func (in *S2iRunSpec) DeepCopyInto(out *S2iRunSpec)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

type S2iRunStatus

type S2iRunStatus struct {
	// StartTime represent when this run began
	StartTime *metav1.Time `json:"startTime,omitempty" protobuf:"bytes,2,opt,name=startTime"`

	// Represents time when the job was completed. It is not guaranteed to
	// be set in happens-before order across separate operations.
	// It is represented in RFC3339 form and is in UTC.
	// +optional
	CompletionTime *metav1.Time `json:"completionTime,omitempty" protobuf:"bytes,3,opt,name=completionTime"`
	// RunState  indicates whether this job is done or failed
	RunState RunState `json:"runState,omitempty"`
	//LogURL is uesd for external log handler to let user know where is log located in
	LogURL string `json:"logURL,omitempty"`
	//KubernetesJobName is the job name in k8s
	KubernetesJobName string `json:"kubernetesJobName,omitempty"`

	// S2i build result info.
	S2iBuildResult *S2iBuildResult `json:"s2iBuildResult,omitempty"`
	// S2i build source info.
	S2iBuildSource *S2iBuildSource `json:"s2iBuildSource,omitempty"`
}

S2iRunStatus defines the observed state of S2iRun

func (*S2iRunStatus) DeepCopy

func (in *S2iRunStatus) DeepCopy() *S2iRunStatus

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new S2iRunStatus.

func (*S2iRunStatus) DeepCopyInto

func (in *S2iRunStatus) DeepCopyInto(out *S2iRunStatus)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

type TriggerSource

type TriggerSource string
const (
	Default TriggerSource = "Manual"
	Github  TriggerSource = "Github"
	Gitlab  TriggerSource = "Gitlab"
	SVN     TriggerSource = "SVN"
	Others  TriggerSource = "Others"
)

type UserDefineTemplate

type UserDefineTemplate struct {
	//Name specify a template to use, so many fields in Config can left empty
	Name string `json:"name,omitempty"`
	//Parameters must use with `template`, fill some parameters which template will use
	Parameters []Parameter `json:"parameters,omitempty"`
	//BaseImage specify which version of this template to use
	BuilderImage string `json:"builderImage,omitempty"`
}

func (*UserDefineTemplate) DeepCopy

func (in *UserDefineTemplate) DeepCopy() *UserDefineTemplate

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new UserDefineTemplate.

func (*UserDefineTemplate) DeepCopyInto

func (in *UserDefineTemplate) DeepCopyInto(out *UserDefineTemplate)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

type VolumeSpec

type VolumeSpec struct {
	// Source is a reference to the volume source.
	Source string `json:"source,omitempty"`
	// Destination is the path to mount the volume to - absolute or relative.
	Destination string `json:"destination,omitempty"`
	// Keep indicates if the mounted data should be kept in the final image.
	Keep bool `json:"keep,omitempty"`
}

VolumeSpec represents a single volume mount point.

func (*VolumeSpec) DeepCopy

func (in *VolumeSpec) DeepCopy() *VolumeSpec

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new VolumeSpec.

func (*VolumeSpec) DeepCopyInto

func (in *VolumeSpec) DeepCopyInto(out *VolumeSpec)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL