server

package
v0.8.1 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Jun 9, 2016 License: MIT Imports: 26 Imported by: 0

Documentation

Overview

Package sublist is a routing mechanism to handle subject distribution and provides a facility to match subjects from published messages to interested subscribers. Subscribers can have wildcard subjects to match multiple published subjects.

Index

Constants

View Source
const (
	// CLIENT is an end user.
	CLIENT = iota
	// ROUTER is another router in the cluster.
	ROUTER
)

Type of client

View Source
const (
	// VERSION is the current version for the server.
	VERSION = "0.8.1"

	// DEFAULT_PORT is the default port for client connections.
	DEFAULT_PORT = 4222

	// RANDOM_PORT is the value for port that, when supplied, will cause the
	// server to listen on a randomly-chosen available port. The resolved port
	// is available via the Addr() method.
	RANDOM_PORT = -1

	// DEFAULT_HOST defaults to all interfaces.
	DEFAULT_HOST = "0.0.0.0"

	// MAX_CONTROL_LINE_SIZE is the maximum allowed protocol control line size.
	// 1k should be plenty since payloads sans connect string are separate
	MAX_CONTROL_LINE_SIZE = 1024

	// MAX_PAYLOAD_SIZE is the maximum allowed payload size. Should be using
	// something different if > 1MB payloads are needed.
	MAX_PAYLOAD_SIZE = (1024 * 1024)

	// MAX_PENDING_SIZE is the maximum outbound size (in bytes) per client.
	MAX_PENDING_SIZE = (10 * 1024 * 1024)

	// DEFAULT_MAX_CONNECTIONS is the default maximum connections allowed.
	DEFAULT_MAX_CONNECTIONS = (64 * 1024)

	// TLS_TIMEOUT is the TLS wait time.
	TLS_TIMEOUT = 500 * time.Millisecond

	// AUTH_TIMEOUT is the authorization wait time.
	AUTH_TIMEOUT = 2 * TLS_TIMEOUT

	// DEFAULT_PING_INTERVAL is how often pings are sent to clients and routes.
	DEFAULT_PING_INTERVAL = 2 * time.Minute

	// DEFAULT_PING_MAX_OUT is maximum allowed pings outstanding before disconnect.
	DEFAULT_PING_MAX_OUT = 2

	// CR_LF string
	CR_LF = "\r\n"

	// LEN_CR_LF hold onto the computed size.
	LEN_CR_LF = len(CR_LF)

	// DEFAULT_FLUSH_DEADLINE is the write/flush deadlines.
	DEFAULT_FLUSH_DEADLINE = 2 * time.Second

	// DEFAULT_HTTP_PORT is the default monitoring port.
	DEFAULT_HTTP_PORT = 8222

	// ACCEPT_MIN_SLEEP is the minimum acceptable sleep times on temporary errors.
	ACCEPT_MIN_SLEEP = 10 * time.Millisecond

	// ACCEPT_MAX_SLEEP is the maximum acceptable sleep times on temporary errors
	ACCEPT_MAX_SLEEP = 1 * time.Second

	// DEFAULT_ROUTE_CONNECT Route solicitation intervals.
	DEFAULT_ROUTE_CONNECT = 1 * time.Second

	// DEFAULT_ROUTE_RECONNECT Route reconnect intervals.
	DEFAULT_ROUTE_RECONNECT = 1 * time.Second

	// DEFAULT_ROUTE_DIAL Route dial timeout.
	DEFAULT_ROUTE_DIAL = 1 * time.Second

	// PROTO_SNIPPET_SIZE is the default size of proto to print on parse errors.
	PROTO_SNIPPET_SIZE = 32

	// MAX_MSG_ARGS Maximum possible number of arguments from MSG proto.
	MAX_MSG_ARGS = 4

	// MAX_PUB_ARGS Maximum possible number of arguments from PUB proto.
	MAX_PUB_ARGS = 3
)
View Source
const (
	OP_START = iota
	OP_PLUS
	OP_PLUS_O
	OP_PLUS_OK
	OP_MINUS
	OP_MINUS_E
	OP_MINUS_ER
	OP_MINUS_ERR
	OP_MINUS_ERR_SPC
	MINUS_ERR_ARG
	OP_C
	OP_CO
	OP_CON
	OP_CONN
	OP_CONNE
	OP_CONNEC
	OP_CONNECT
	CONNECT_ARG
	OP_P
	OP_PU
	OP_PUB
	OP_PUB_SPC
	PUB_ARG
	OP_PI
	OP_PIN
	OP_PING
	OP_PO
	OP_PON
	OP_PONG
	MSG_PAYLOAD
	MSG_END
	OP_S
	OP_SU
	OP_SUB
	OP_SUB_SPC
	SUB_ARG
	OP_U
	OP_UN
	OP_UNS
	OP_UNSU
	OP_UNSUB
	OP_UNSUB_SPC
	UNSUB_ARG
	OP_M
	OP_MS
	OP_MSG
	OP_MSG_SPC
	MSG_ARG
	OP_I
	OP_IN
	OP_INF
	OP_INFO
	INFO_ARG
)

Parser constants

View Source
const (
	ConProto  = "CONNECT %s" + _CRLF_
	InfoProto = "INFO %s" + _CRLF_
)

Route protocol constants

View Source
const (
	RSID  = "RSID"
	QRSID = "QRSID"

	RSID_CID_INDEX   = 1
	RSID_SID_INDEX   = 2
	EXPECTED_MATCHES = 3
)

FIXME(dlc) - Make these reserved and reject if they come in as a sid from a client connection. Route constants

View Source
const (
	RootPath    = "/"
	VarzPath    = "/varz"
	ConnzPath   = "/connz"
	RoutezPath  = "/routez"
	SubszPath   = "/subsz"
	StackszPath = "/stacksz"
)

HTTP endpoints

View Source
const DefaultConnListSize = 1024

DefaultConnListSize is the default size of the connection list.

Variables

View Source
var (
	// ErrConnectionClosed represents error condition on a closed connection.
	ErrConnectionClosed = errors.New("Connection Closed")

	// ErrAuthorization represents error condition on failed authorization.
	ErrAuthorization = errors.New("Authorization Error")

	// ErrAuthTimeout represents error condition on failed authorization due to timeout.
	ErrAuthTimeout = errors.New("Authorization Timeout")

	// ErrMaxPayload represents error condition when the payload is too big.
	ErrMaxPayload = errors.New("Maximum Payload Exceeded")
)
View Source
var (
	ErrInvalidSubject = errors.New("sublist: Invalid Subject")
	ErrNotFound       = errors.New("sublist: No Matches Found")
)

Sublist related errors

Functions

func Debugf

func Debugf(format string, v ...interface{})

Debugf logs a debug statement

func Errorf added in v0.6.0

func Errorf(format string, v ...interface{})

Errorf logs an error

func Fatalf

func Fatalf(format string, v ...interface{})

Fatalf logs a fatal error

func GenTLSConfig added in v0.7.0

func GenTLSConfig(tc *TLSConfigOpts) (*tls.Config, error)

GenTLSConfig loads TLS related configuration parameters.

func IsValidLiteralSubject added in v0.8.0

func IsValidLiteralSubject(subject string) bool

IsValidLiteralSubject returns true if a subject is valid, false otherwise

func Noticef added in v0.6.0

func Noticef(format string, v ...interface{})

Noticef logs a notice statement

func PrintAndDie

func PrintAndDie(msg string)

PrintAndDie is exported for access in other packages.

func PrintServerAndExit

func PrintServerAndExit()

PrintServerAndExit will print our version and exit.

func PrintTLSHelpAndDie added in v0.8.0

func PrintTLSHelpAndDie()

PrintTLSHelpAndDie prints TLS usage and exits.

func RemoveSelfReference added in v0.5.6

func RemoveSelfReference(clusterPort int, routes []*url.URL) ([]*url.URL, error)

RemoveSelfReference removes this server from an array of routes

func ResponseHandler added in v0.6.6

func ResponseHandler(w http.ResponseWriter, r *http.Request, data []byte)

ResponseHandler handles responses for monitoring routes

func RoutesFromStr added in v0.6.2

func RoutesFromStr(routesStr string) []*url.URL

RoutesFromStr parses route URLs from a string

func Tracef

func Tracef(format string, v ...interface{})

Tracef logs a trace statement

Types

type Auth added in v0.6.0

type Auth interface {
	// Check if a client is authorized to connect
	Check(c ClientAuth) bool
}

Auth is an interface for implementing authentication

type ClientAuth added in v0.6.0

type ClientAuth interface {
	// Get options associated with a client
	GetOpts() *clientOpts
}

ClientAuth is an interface for client authentication

type ConnInfo

type ConnInfo struct {
	Cid            uint64    `json:"cid"`
	IP             string    `json:"ip"`
	Port           int       `json:"port"`
	Start          time.Time `json:"start"`
	LastActivity   time.Time `json:"last_activity"`
	Uptime         string    `json:"uptime"`
	Idle           string    `json:"idle"`
	Pending        int       `json:"pending_bytes"`
	InMsgs         int64     `json:"in_msgs"`
	OutMsgs        int64     `json:"out_msgs"`
	InBytes        int64     `json:"in_bytes"`
	OutBytes       int64     `json:"out_bytes"`
	NumSubs        uint32    `json:"subscriptions"`
	Name           string    `json:"name,omitempty"`
	Lang           string    `json:"lang,omitempty"`
	Version        string    `json:"version,omitempty"`
	TLSVersion     string    `json:"tls_version,omitempty"`
	TLSCipher      string    `json:"tls_cipher_suite,omitempty"`
	AuthorizedUser string    `json:"authorized_user,omitempty"`
	Subs           []string  `json:"subscriptions_list,omitempty"`
}

ConnInfo has detailed information on a per connection basis.

type Connz

type Connz struct {
	Now      time.Time  `json:"now"`
	NumConns int        `json:"num_connections"`
	Total    int        `json:"total"`
	Offset   int        `json:"offset"`
	Limit    int        `json:"limit"`
	Conns    []ConnInfo `json:"connections"`
}

Connz represents detailed information on current client connections.

type Info

type Info struct {
	ID           string `json:"server_id"`
	Version      string `json:"version"`
	GoVersion    string `json:"go"`
	Host         string `json:"host"`
	Port         int    `json:"port"`
	AuthRequired bool   `json:"auth_required"`
	SSLRequired  bool   `json:"ssl_required"` // DEPRECATED: ssl json used for older clients
	TLSRequired  bool   `json:"tls_required"`
	TLSVerify    bool   `json:"tls_verify"`
	MaxPayload   int    `json:"max_payload"`
	IP           string `json:"ip,omitempty"`
}

Info is the information sent to clients to help them understand information about this server.

type Logger added in v0.6.0

type Logger interface {

	// Log a notice statement
	Noticef(format string, v ...interface{})

	// Log a fatal error
	Fatalf(format string, v ...interface{})

	// Log an error
	Errorf(format string, v ...interface{})

	// Log a debug statement
	Debugf(format string, v ...interface{})

	// Log a trace statement
	Tracef(format string, v ...interface{})
}

Logger interface of the NATS Server

type Options

type Options struct {
	Host               string        `json:"addr"`
	Port               int           `json:"port"`
	Trace              bool          `json:"-"`
	Debug              bool          `json:"-"`
	NoLog              bool          `json:"-"`
	NoSigs             bool          `json:"-"`
	Logtime            bool          `json:"-"`
	MaxConn            int           `json:"max_connections"`
	Users              []User        `json:"-"`
	Username           string        `json:"-"`
	Password           string        `json:"-"`
	Authorization      string        `json:"-"`
	PingInterval       time.Duration `json:"ping_interval"`
	MaxPingsOut        int           `json:"ping_max"`
	HTTPHost           string        `json:"http_host"`
	HTTPPort           int           `json:"http_port"`
	HTTPSPort          int           `json:"https_port"`
	AuthTimeout        float64       `json:"auth_timeout"`
	MaxControlLine     int           `json:"max_control_line"`
	MaxPayload         int           `json:"max_payload"`
	MaxPending         int           `json:"max_pending_size"`
	ClusterHost        string        `json:"addr"`
	ClusterPort        int           `json:"cluster_port"`
	ClusterUsername    string        `json:"-"`
	ClusterPassword    string        `json:"-"`
	ClusterAuthTimeout float64       `json:"auth_timeout"`
	ClusterTLSTimeout  float64       `json:"-"`
	ClusterTLSConfig   *tls.Config   `json:"-"`
	ClusterListenStr   string        `json:"-"`
	ProfPort           int           `json:"-"`
	PidFile            string        `json:"-"`
	LogFile            string        `json:"-"`
	Syslog             bool          `json:"-"`
	RemoteSyslog       string        `json:"-"`
	Routes             []*url.URL    `json:"-"`
	RoutesStr          string        `json:"-"`
	TLSTimeout         float64       `json:"tls_timeout"`
	TLS                bool          `json:"-"`
	TLSVerify          bool          `json:"-"`
	TLSCert            string        `json:"-"`
	TLSKey             string        `json:"-"`
	TLSCaCert          string        `json:"-"`
	TLSConfig          *tls.Config   `json:"-"`
}

Options block for gnatsd server.

func MergeOptions

func MergeOptions(fileOpts, flagOpts *Options) *Options

MergeOptions will merge two options giving preference to the flagOpts if the item is present.

func ProcessConfigFile

func ProcessConfigFile(configFile string) (*Options, error)

ProcessConfigFile processes a configuration file. FIXME(dlc): Hacky

type Pair added in v0.6.2

type Pair struct {
	Key *client
	Val int64
}

Pair type is internally used.

type Pairs added in v0.8.0

type Pairs []Pair

Pairs type is internally used.

func (Pairs) Len added in v0.8.0

func (d Pairs) Len() int

func (Pairs) Less added in v0.8.0

func (d Pairs) Less(i, j int) bool

func (Pairs) Swap added in v0.8.0

func (d Pairs) Swap(i, j int)

type RouteInfo added in v0.6.0

type RouteInfo struct {
	Rid          uint64   `json:"rid"`
	RemoteID     string   `json:"remote_id"`
	DidSolicit   bool     `json:"did_solicit"`
	IsConfigured bool     `json:"is_configured"`
	IP           string   `json:"ip"`
	Port         int      `json:"port"`
	Pending      int      `json:"pending_size"`
	InMsgs       int64    `json:"in_msgs"`
	OutMsgs      int64    `json:"out_msgs"`
	InBytes      int64    `json:"in_bytes"`
	OutBytes     int64    `json:"out_bytes"`
	NumSubs      uint32   `json:"subscriptions"`
	Subs         []string `json:"subscriptions_list,omitempty"`
}

RouteInfo has detailed information on a per connection basis.

type RouteType added in v0.8.0

type RouteType int

RouteType designates the router type

const (
	// This route we learned from speaking to other routes.
	Implicit RouteType = iota
	// This route was explicitly configured.
	Explicit
)

Type of Route

type Routez added in v0.6.0

type Routez struct {
	Now       time.Time    `json:"now"`
	NumRoutes int          `json:"num_routes"`
	Routes    []*RouteInfo `json:"routes"`
}

Routez represents detailed information on current client connections.

type Server

type Server struct {
	// contains filtered or unexported fields
}

Server is our main struct.

func New

func New(opts *Options) *Server

New will setup a new server struct after parsing the options.

func (*Server) AcceptLoop

func (s *Server) AcceptLoop()

AcceptLoop is exported for easier testing.

func (*Server) Addr added in v0.5.4

func (s *Server) Addr() net.Addr

Addr will return the net.Addr object for the current listener.

func (*Server) GetListenEndpoint added in v0.8.0

func (s *Server) GetListenEndpoint() string

GetListenEndpoint will return a string of the form host:port suitable for a connect. Will return empty string if the server is not ready to accept client connections.

func (*Server) GetRouteListenEndpoint added in v0.8.0

func (s *Server) GetRouteListenEndpoint() string

GetRouteListenEndpoint will return a string of the form host:port suitable for a connect. Will return empty string if the server is not configured for routing or not ready to accept route connections.

func (*Server) HandleConnz

func (s *Server) HandleConnz(w http.ResponseWriter, r *http.Request)

HandleConnz process HTTP requests for connection information.

func (*Server) HandleRoot added in v0.6.2

func (s *Server) HandleRoot(w http.ResponseWriter, r *http.Request)

HandleRoot will show basic info and links to others handlers.

func (*Server) HandleRoutez added in v0.6.0

func (s *Server) HandleRoutez(w http.ResponseWriter, r *http.Request)

HandleRoutez process HTTP requests for route information.

func (*Server) HandleStacksz added in v0.8.1

func (s *Server) HandleStacksz(w http.ResponseWriter, r *http.Request)

HandleStacksz processes HTTP requests for getting stacks

func (*Server) HandleSubsz added in v0.6.0

func (s *Server) HandleSubsz(w http.ResponseWriter, r *http.Request)

HandleSubsz processes HTTP requests for subjects stats.

func (*Server) HandleVarz

func (s *Server) HandleVarz(w http.ResponseWriter, r *http.Request)

HandleVarz will process HTTP requests for server information.

func (*Server) ID added in v0.8.0

func (s *Server) ID() string

ID returns the server's ID

func (*Server) NumClients

func (s *Server) NumClients() int

NumClients will report the number of registered clients.

func (*Server) NumRemotes

func (s *Server) NumRemotes() int

NumRemotes will report number of registered remotes.

func (*Server) NumRoutes

func (s *Server) NumRoutes() int

NumRoutes will report the number of registered routes.

func (*Server) NumSubscriptions

func (s *Server) NumSubscriptions() uint32

NumSubscriptions will report how many subscriptions are active.

func (*Server) SetClientAuthMethod added in v0.8.0

func (s *Server) SetClientAuthMethod(authMethod Auth)

SetClientAuthMethod sets the authentication method for clients.

func (*Server) SetLogger added in v0.6.0

func (s *Server) SetLogger(logger Logger, debugFlag, traceFlag bool)

SetLogger sets the logger of the server

func (*Server) SetRouteAuthMethod added in v0.8.0

func (s *Server) SetRouteAuthMethod(authMethod Auth)

SetRouteAuthMethod sets the authentication method for routes.

func (*Server) Shutdown

func (s *Server) Shutdown()

Shutdown will shutdown the server instance by kicking out the AcceptLoop and closing all associated clients.

func (*Server) Start

func (s *Server) Start()

Start up the server, this will block. Start via a Go routine if needed.

func (*Server) StartHTTPMonitoring

func (s *Server) StartHTTPMonitoring()

StartHTTPMonitoring will enable the HTTP monitoring port.

func (*Server) StartHTTPSMonitoring added in v0.7.0

func (s *Server) StartHTTPSMonitoring()

StartHTTPSMonitoring will enable the HTTPS monitoring port.

func (*Server) StartProfiler

func (s *Server) StartProfiler()

StartProfiler is called to enable dynamic profiling.

func (*Server) StartRouting

func (s *Server) StartRouting()

StartRouting will start the accept loop on the cluster host:port and will actively try to connect to listed routes.

type SortOpt added in v0.6.2

type SortOpt string

SortOpt is a helper type to sort by ConnInfo values

func (SortOpt) IsValid added in v0.8.0

func (s SortOpt) IsValid() bool

IsValid determines if a sort option is valid

type Sublist added in v0.8.0

type Sublist struct {
	sync.RWMutex
	// contains filtered or unexported fields
}

A Sublist stores and efficiently retrieves subscriptions.

func NewSublist added in v0.8.0

func NewSublist() *Sublist

New will create a default sublist

func (*Sublist) CacheCount added in v0.8.0

func (s *Sublist) CacheCount() int

CacheCount returns the number of result sets in the cache.

func (*Sublist) Count added in v0.8.0

func (s *Sublist) Count() uint32

Count returns the number of subscriptions.

func (*Sublist) Insert added in v0.8.0

func (s *Sublist) Insert(sub *subscription) error

Insert adds a subscription into the sublist

func (*Sublist) Match added in v0.8.0

func (s *Sublist) Match(subject string) *SublistResult

Match will match all entries to the literal subject. It will return a set of results for both normal and queue subscribers.

func (*Sublist) Remove added in v0.8.0

func (s *Sublist) Remove(sub *subscription) error

Remove will remove a subscription.

func (*Sublist) Stats added in v0.8.0

func (s *Sublist) Stats() *SublistStats

Stats will return a stats structure for the current state.

type SublistResult added in v0.8.0

type SublistResult struct {
	// contains filtered or unexported fields
}

A result structure better optimized for queue subs.

type SublistStats added in v0.8.0

type SublistStats struct {
	NumSubs      uint32  `json:"num_subscriptions"`
	NumCache     uint32  `json:"num_cache"`
	NumInserts   uint64  `json:"num_inserts"`
	NumRemoves   uint64  `json:"num_removes"`
	NumMatches   uint64  `json:"num_matches"`
	CacheHitRate float64 `json:"cache_hit_rate"`
	MaxFanout    uint32  `json:"max_fanout"`
	AvgFanout    float64 `json:"avg_fanout"`
}

Public stats for the sublist

type Subsz added in v0.6.0

type Subsz struct {
	*SublistStats
}

Subsz represents detail information on current connections.

type TLSConfigOpts added in v0.7.0

type TLSConfigOpts struct {
	CertFile string
	KeyFile  string
	CaFile   string
	Verify   bool
	Timeout  float64
	Ciphers  []uint16
}

TLSConfigOpts holds the parsed tls config information, used with flag parsing

type User added in v0.8.1

type User struct {
	Username string `json:"user"`
	Password string `json:"password"`
}

For multiple accounts/users.

type Varz

type Varz struct {
	*Info
	*Options
	Port             int               `json:"port"`
	MaxPayload       int               `json:"max_payload"`
	Start            time.Time         `json:"start"`
	Now              time.Time         `json:"now"`
	Uptime           string            `json:"uptime"`
	Mem              int64             `json:"mem"`
	Cores            int               `json:"cores"`
	CPU              float64           `json:"cpu"`
	Connections      int               `json:"connections"`
	TotalConnections uint64            `json:"total_connections"`
	Routes           int               `json:"routes"`
	Remotes          int               `json:"remotes"`
	InMsgs           int64             `json:"in_msgs"`
	OutMsgs          int64             `json:"out_msgs"`
	InBytes          int64             `json:"in_bytes"`
	OutBytes         int64             `json:"out_bytes"`
	SlowConsumers    int64             `json:"slow_consumers"`
	Subscriptions    uint32            `json:"subscriptions"`
	HTTPReqStats     map[string]uint64 `json:"http_req_stats"`
}

Varz will output server information on the monitoring port at /varz.

Directories

Path Synopsis

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL