v1beta1

type BufferMetrics struct {
	Metrics   `json:",inline"`
	MountName string `json:"mount_name,omitempty"`
}

type BufferStorage struct {
	// Set an optional location in the file system to store streams and chunks of data. If this parameter is not set, Input plugins can only use in-memory buffering.
	StoragePath string `json:"storage.path,omitempty"`
	// Configure the synchronization mode used to store the data into the file system. It can take the values normal or full. (default:normal)
	StorageSync string `json:"storage.sync,omitempty"`
	// Enable the data integrity check when writing and reading data from the filesystem. The storage layer uses the CRC32 algorithm. (default:Off)
	StorageChecksum string `json:"storage.checksum,omitempty"`
	// If storage.path is set, Fluent Bit will look for data chunks that were not delivered and are still in the storage layer, these are called backlog data. This option configure a hint of maximum value of memory to use when processing these records. (default:5M)
	StorageBacklogMemLimit string `json:"storage.backlog.mem_limit,omitempty"`
	// If http_server option has been enabled in the main Service configuration section, this option registers a new endpoint where internal metrics of the storage layer can be consumed. (default:Off)
	StorageMetrics string `json:"storage.metrics,omitempty"`
}

type ClusterExclude struct {
	Namespaces     []string          `json:"namespaces,omitempty"`
	Labels         map[string]string `json:"labels,omitempty"`
	Hosts          []string          `json:"hosts,omitempty"`
	ContainerNames []string          `json:"container_names,omitempty"`
}

type ClusterFlow struct {
	metav1.TypeMeta   `json:",inline"`
	metav1.ObjectMeta `json:"metadata,omitempty"`

	// Name of the logging cluster to be attached
	Spec   ClusterFlowSpec `json:"spec,omitempty"`
	Status FlowStatus      `json:"status,omitempty"`
}

type ClusterFlowList struct {
	metav1.TypeMeta `json:",inline"`
	metav1.ListMeta `json:"metadata,omitempty"`
	Items           []ClusterFlow `json:"items"`
}

type ClusterFlowSpec struct {
	// Deprecated
	Selectors  map[string]string `json:"selectors,omitempty"`
	Match      []ClusterMatch    `json:"match,omitempty"`
	Filters    []Filter          `json:"filters,omitempty"`
	LoggingRef string            `json:"loggingRef,omitempty"`
	// Deprecated
	OutputRefs           []string `json:"outputRefs,omitempty"`
	GlobalOutputRefs     []string `json:"globalOutputRefs,omitempty"`
	FlowLabel            string   `json:"flowLabel,omitempty"`
	IncludeLabelInRouter *bool    `json:"includeLabelInRouter,omitempty"`
}

type ClusterMatch struct {
	*ClusterSelect  `json:"select,omitempty"`
	*ClusterExclude `json:"exclude,omitempty"`
}

type ClusterOutput struct {
	metav1.TypeMeta   `json:",inline"`
	metav1.ObjectMeta `json:"metadata,omitempty"`

	Spec   ClusterOutputSpec `json:"spec"`
	Status OutputStatus      `json:"status,omitempty"`
}

type ClusterOutputList struct {
	metav1.TypeMeta `json:",inline"`
	metav1.ListMeta `json:"metadata,omitempty"`
	Items           []ClusterOutput `json:"items"`
}

type ClusterOutputSpec struct {
	OutputSpec        `json:",inline"`
	EnabledNamespaces []string `json:"enabledNamespaces,omitempty"`
}

type ClusterSelect struct {
	Namespaces     []string          `json:"namespaces,omitempty"`
	Labels         map[string]string `json:"labels,omitempty"`
	Hosts          []string          `json:"hosts,omitempty"`
	ContainerNames []string          `json:"container_names,omitempty"`
}

type ConfigCheck struct {
	// Select the config check strategy to use.
	// `DryRun`: parse and validate configuration
	// `StartWithTimeout`: start with given configuration and exit after specified timeout
	// Default: `DryRun`
	Strategy ConfigCheckStrategy `json:"strategy,omitempty"`

	// Configure timeout in seconds if strategy is StartWithTimeout
	TimeoutSeconds int `json:"timeoutSeconds,omitempty"`
	// Labels to use for the configcheck pods on top of labels added by the operator by default. Default values can be overwritten.
	Labels map[string]string `json:"labels,omitempty"`
}

type ConfigCheckStrategy string

type DefaultFlowSpec struct {
	Filters []Filter `json:"filters,omitempty"`
	// Deprecated
	OutputRefs           []string `json:"outputRefs,omitempty"`
	GlobalOutputRefs     []string `json:"globalOutputRefs,omitempty"`
	FlowLabel            string   `json:"flowLabel,omitempty"`
	IncludeLabelInRouter *bool    `json:"includeLabelInRouter,omitempty"`
}

type Exclude struct {
	Labels         map[string]string `json:"labels,omitempty"`
	Hosts          []string          `json:"hosts,omitempty"`
	ContainerNames []string          `json:"container_names,omitempty"`
}

type ExtraVolume struct {
	VolumeName    string                   `json:"volumeName,omitempty"`
	Path          string                   `json:"path,omitempty"`
	ContainerName string                   `json:"containerName,omitempty"`
	Volume        *volume.KubernetesVolume `json:"volume,omitempty"`
}

type Filter struct {
	StdOut              *filter.StdOutFilterConfig        `json:"stdout,omitempty"`
	Parser              *filter.ParserConfig              `json:"parser,omitempty"`
	TagNormaliser       *filter.TagNormaliser             `json:"tag_normaliser,omitempty"`
	Dedot               *filter.DedotFilterConfig         `json:"dedot,omitempty"`
	ElasticGenId        *filter.ElasticsearchGenId        `json:"elasticsearch_genid,omitempty"`
	RecordTransformer   *filter.RecordTransformer         `json:"record_transformer,omitempty"`
	RecordModifier      *filter.RecordModifier            `json:"record_modifier,omitempty"`
	GeoIP               *filter.GeoIP                     `json:"geoip,omitempty"`
	Concat              *filter.Concat                    `json:"concat,omitempty"`
	DetectExceptions    *filter.DetectExceptions          `json:"detectExceptions,omitempty"`
	Grep                *filter.GrepConfig                `json:"grep,omitempty"`
	Prometheus          *filter.PrometheusConfig          `json:"prometheus,omitempty"`
	Throttle            *filter.Throttle                  `json:"throttle,omitempty"`
	SumoLogic           *filter.SumoLogic                 `json:"sumologic,omitempty"`
	EnhanceK8s          *filter.EnhanceK8s                `json:"enhanceK8s,omitempty"`
	KubeEventsTimestamp *filter.KubeEventsTimestampConfig `json:"kube_events_timestamp,omitempty"`
}

type FilterAws struct {
	// Specify which version of the instance metadata service to use. Valid values are 'v1' or 'v2' (default).
	ImdsVersion string `json:"imds_version,omitempty" plugin:"default:v2"`
	// The availability zone (default:true).
	AZ *bool `json:"az,omitempty" plugin:"default:true"`
	// The EC2 instance ID. (default:true)
	Ec2InstanceID *bool `json:"ec2_instance_id,omitempty" plugin:"default:true"`
	// The EC2 instance type. (default:false)
	Ec2InstanceType *bool `json:"ec2_instance_type,omitempty" plugin:"default:false"`
	// The EC2 instance private ip. (default:false)
	PrivateIP *bool `json:"private_ip,omitempty" plugin:"default:false"`
	// The EC2 instance image id. (default:false)
	AmiID *bool `json:"ami_id,omitempty" plugin:"default:false"`
	// The account ID for current EC2 instance. (default:false)
	AccountID *bool `json:"account_id,omitempty" plugin:"default:false"`
	// The hostname for current EC2 instance. (default:false)
	Hostname *bool `json:"hostname,omitempty" plugin:"default:false"`
	// The VPC ID for current EC2 instance. (default:false)
	VpcID *bool `json:"vpc_id,omitempty" plugin:"default:false"`
	// Match filtered records (default:*)
	Match string `json:"Match,omitempty" plugin:"default:*"`
}

type FilterKey struct {
	Key string `json:"key,omitempty"`
}

type FilterKeyValue struct {
	Key   string `json:"key,omitempty"`
	Value string `json:"value,omitempty"`
}

type FilterKubernetes struct {
	// Match filtered records (default:kube.*)
	Match string `json:"Match,omitempty" plugin:"default:kubernetes.*"`
	// Set the buffer size for HTTP client when reading responses from Kubernetes API server. The value must be according to the Unit Size specification. A value of 0 results in no limit, and the buffer will expand as-needed. Note that if pod specifications exceed the buffer limit, the API response will be discarded when retrieving metadata, and some kubernetes metadata will fail to be injected to the logs. If this value is empty we will set it "0". (default:"0")
	BufferSize string `json:"Buffer_Size,omitempty"`
	// API Server end-point (default:https://kubernetes.default.svc:443)
	KubeURL string `json:"Kube_URL,omitempty" plugin:"default:https://kubernetes.default.svc:443"`
	//	CA certificate file (default:/var/run/secrets/kubernetes.io/serviceaccount/ca.crt)
	KubeCAFile string `json:"Kube_CA_File,omitempty" plugin:"default:/var/run/secrets/kubernetes.io/serviceaccount/ca.crt"`
	// Absolute path to scan for certificate files
	KubeCAPath string `json:"Kube_CA_Path,omitempty"`
	// Token file  (default:/var/run/secrets/kubernetes.io/serviceaccount/token)
	KubeTokenFile string `json:"Kube_Token_File,omitempty" plugin:"default:/var/run/secrets/kubernetes.io/serviceaccount/token"`
	// Token TTL configurable 'time to live' for the K8s token. By default, it is set to 600 seconds. After this time, the token is reloaded from Kube_Token_File or the Kube_Token_Command.  (default:"600")
	KubeTokenTTL string `json:"Kube_Token_TTL,omitempty" plugin:"default:600"`
	// When the source records comes from Tail input plugin, this option allows to specify what's the prefix used in Tail configuration. (default:kube.var.log.containers.)
	KubeTagPrefix string `json:"Kube_Tag_Prefix,omitempty" plugin:"default:kubernetes.var.log.containers"`
	// When enabled, it checks if the log field content is a JSON string map, if so, it append the map fields as part of the log structure. (default:Off)
	MergeLog string `json:"Merge_Log,omitempty" plugin:"default:On"`
	// When Merge_Log is enabled, the filter tries to assume the log field from the incoming message is a JSON string message and make a structured representation of it at the same level of the log field in the map. Now if Merge_Log_Key is set (a string name), all the new structured fields taken from the original log content are inserted under the new key.
	MergeLogKey string `json:"Merge_Log_Key,omitempty"`
	// When Merge_Log is enabled, trim (remove possible \n or \r) field values.  (default:On)
	MergeLogTrim string `json:"Merge_Log_Trim,omitempty"`
	// Optional parser name to specify how to parse the data contained in the log key. Recommended use is for developers or testing only.
	MergeParser string `json:"Merge_Parser,omitempty"`
	// When Keep_Log is disabled, the log field is removed from the incoming message once it has been successfully merged (Merge_Log must be enabled as well). (default:On)
	KeepLog string `json:"Keep_Log,omitempty"`
	// Debug level between 0 (nothing) and 4 (every detail). (default:-1)
	TLSDebug string `json:"tls.debug,omitempty"`
	// When enabled, turns on certificate validation when connecting to the Kubernetes API server. (default:On)
	TLSVerify string `json:"tls.verify,omitempty"`
	// When enabled, the filter reads logs coming in Journald format. (default:Off)
	UseJournal string `json:"Use_Journal,omitempty"`
	// When enabled, metadata will be fetched from K8s when docker_id is changed. (default:Off)
	CacheUseDockerId string `json:"Cache_Use_Docker_Id,omitempty"`
	// Set an alternative Parser to process record Tag and extract pod_name, namespace_name, container_name and docker_id. The parser must be registered in a parsers file (refer to parser filter-kube-test as an example).
	RegexParser string `json:"Regex_Parser,omitempty"`
	// Allow Kubernetes Pods to suggest a pre-defined Parser (read more about it in Kubernetes Annotations section) (default:Off)
	K8SLoggingParser string `json:"K8S-Logging.Parser,omitempty"`
	// Allow Kubernetes Pods to exclude their logs from the log processor (read more about it in Kubernetes Annotations section). (default:On)
	K8SLoggingExclude string `json:"K8S-Logging.Exclude,omitempty"`
	// Include Kubernetes resource labels in the extra metadata. (default:On)
	Labels string `json:"Labels,omitempty"`
	// Include Kubernetes resource annotations in the extra metadata. (default:On)
	Annotations string `json:"Annotations,omitempty"`
	// If set, Kubernetes meta-data can be cached/pre-loaded from files in JSON format in this directory, named as namespace-pod.meta
	KubeMetaPreloadCacheDir string `json:"Kube_meta_preload_cache_dir,omitempty"`
	// If set, use dummy-meta data (for test/dev purposes) (default:Off)
	DummyMeta string `json:"Dummy_Meta,omitempty"`
	// DNS lookup retries N times until the network start working (default:6)
	DNSRetries string `json:"DNS_Retries,omitempty"`
	// DNS lookup interval between network status checks (default:30)
	DNSWaitTime string `json:"DNS_Wait_Time,omitempty"`
	// This is an optional feature flag to get metadata information from kubelet instead of calling Kube Server API to enhance the log. (default:Off)
	UseKubelet string `json:"Use_Kubelet,omitempty"`
	// kubelet port using for HTTP request, this only works when Use_Kubelet  set to On (default:10250)
	KubeletPort string `json:"Kubelet_Port,omitempty"`
	// Configurable TTL for K8s cached metadata. By default, it is set to 0 which means TTL for cache entries is disabled and cache entries are evicted at random when capacity is reached. In order to enable this option, you should set the number to a time interval. For example, set this value to 60 or 60s and cache entries which have been created more than 60s will be evicted. (default:0)
	KubeMetaCacheTTL string `json:"Kube_Meta_Cache_TTL,omitempty"`
}

type FilterModify struct {
	// FluentbitAgent Filter Modification Rule
	Rules []FilterModifyRule `json:"rules,omitempty"`
	// FluentbitAgent Filter Modification Condition
	Conditions []FilterModifyCondition `json:"conditions,omitempty"`
}

type FilterModifyCondition struct {
	// Is true if KEY exists
	KeyExists *FilterKey `json:"Key_exists,omitempty"`
	// Is true if KEY does not exist
	KeyDoesNotExist *FilterKeyValue `json:"Key_does_not_exist,omitempty"`
	// Is true if a key matches regex KEY
	AKeyMatches *FilterKey `json:"A_key_matches,omitempty"`
	// Is true if no key matches regex KEY
	NoKeyMatches *FilterKey `json:"No_key_matches,omitempty"`
	// Is true if KEY exists and its value is VALUE
	KeyValueEquals *FilterKeyValue `json:"Key_value_equals,omitempty"`
	// Is true if KEY exists and its value is not VALUE
	KeyValueDoesNotEqual *FilterKeyValue `json:"Key_value_does_not_equal,omitempty"`
	// Is true if key KEY exists and its value matches VALUE
	KeyValueMatches *FilterKeyValue `json:"Key_value_matches,omitempty"`
	// Is true if key KEY exists and its value does not match VALUE
	KeyValueDoesNotMatch *FilterKeyValue `json:"Key_value_does_not_match,omitempty"`
	// Is true if all keys matching KEY have values that match VALUE
	MatchingKeysHaveMatchingValues *FilterKeyValue `json:"Matching_keys_have_matching_values,omitempty"`
	// Is true if all keys matching KEY have values that do not match VALUE
	MatchingKeysDoNotHaveMatchingValues *FilterKeyValue `json:"Matching_keys_do_not_have_matching_values,omitempty"`
}

type FilterModifyRule struct {
	// Add a key/value pair with key KEY and value VALUE. If KEY already exists, this field is overwritten
	Set *FilterKeyValue `json:"Set,omitempty"`
	// Add a key/value pair with key KEY and value VALUE if KEY does not exist
	Add *FilterKeyValue `json:"Add,omitempty" `
	// Remove a key/value pair with key KEY if it exists
	Remove *FilterKey `json:"Remove,omitempty" `
	// Remove all key/value pairs with key matching wildcard KEY
	RemoveWildcard *FilterKey `json:"Remove_wildcard,omitempty" `
	// Remove all key/value pairs with key matching regexp KEY
	RemoveRegex *FilterKey `json:"Remove_regex,omitempty" `
	// Rename a key/value pair with key KEY to RENAMED_KEY if KEY exists AND RENAMED_KEY does not exist
	Rename *FilterKeyValue `json:"Rename,omitempty" `
	// Rename a key/value pair with key KEY to RENAMED_KEY if KEY exists. If RENAMED_KEY already exists, this field is overwritten
	HardRename *FilterKeyValue `json:"Hard_rename,omitempty" `
	// Copy a key/value pair with key KEY to COPIED_KEY if KEY exists AND COPIED_KEY does not exist
	Copy *FilterKeyValue `json:"Copy,omitempty" `
	// Copy a key/value pair with key KEY to COPIED_KEY if KEY exists. If COPIED_KEY already exists, this field is overwritten
	HardCopy *FilterKeyValue `json:"Hard_copy,omitempty" `
}

type Flow struct {
	metav1.TypeMeta   `json:",inline"`
	metav1.ObjectMeta `json:"metadata,omitempty"`

	Spec   FlowSpec   `json:"spec,omitempty"`
	Status FlowStatus `json:"status,omitempty"`
}

type FlowList struct {
	metav1.TypeMeta `json:",inline"`
	metav1.ListMeta `json:"metadata,omitempty"`
	Items           []Flow `json:"items"`
}

type FlowSpec struct {
	// Deprecated
	Selectors  map[string]string `json:"selectors,omitempty"`
	Match      []Match           `json:"match,omitempty"`
	Filters    []Filter          `json:"filters,omitempty"`
	LoggingRef string            `json:"loggingRef,omitempty"`
	// Deprecated
	OutputRefs           []string `json:"outputRefs,omitempty"`
	GlobalOutputRefs     []string `json:"globalOutputRefs,omitempty"`
	LocalOutputRefs      []string `json:"localOutputRefs,omitempty"`
	FlowLabel            string   `json:"flowLabel,omitempty"`
	IncludeLabelInRouter *bool    `json:"includeLabelInRouter,omitempty"`
}

type FlowStatus struct {
	Active        *bool    `json:"active,omitempty"`
	Problems      []string `json:"problems,omitempty"`
	ProblemsCount int      `json:"problemsCount,omitempty"`
}

type FluentOutLogrotate struct {
	Enabled bool   `json:"enabled"`
	Path    string `json:"path,omitempty"`
	Age     string `json:"age,omitempty"`
	Size    string `json:"size,omitempty"`
}

type FluentbitAgent struct {
	metav1.TypeMeta   `json:",inline"`
	metav1.ObjectMeta `json:"metadata,omitempty"`

	Spec   FluentbitSpec   `json:"spec,omitempty"`
	Status FluentbitStatus `json:"status,omitempty"`
}

type FluentbitAgentList struct {
	metav1.TypeMeta `json:",inline"`
	metav1.ListMeta `json:"metadata,omitempty"`
	Items           []FluentbitAgent `json:"items"`
}

type FluentbitNetwork struct {
	// Sets the timeout for connecting to an upstream (default: 10)
	ConnectTimeout *uint32 `json:"connectTimeout,omitempty"`
	// On connection timeout, specify if it should log an error. When disabled, the timeout is logged as a debug message (default: true)
	ConnectTimeoutLogError *bool `json:"connectTimeoutLogError,omitempty"`
	// Sets the primary transport layer protocol used by the asynchronous DNS resolver for connections established (default: UDP, UDP or TCP)
	DNSMode string `json:"dnsMode,omitempty"`
	// Prioritize IPv4 DNS results when trying to establish a connection (default: false)
	DNSPreferIPV4 *bool `json:"dnsPreferIpv4,omitempty"`
	// Select the primary DNS resolver type (default: ASYNC, LEGACY or ASYNC)
	DNSResolver string `json:"dnsResolver,omitempty"`
	// Whether or not TCP keepalive is used for the upstream connection (default: true)
	Keepalive *bool `json:"keepalive,omitempty"`
	// How long in seconds a TCP keepalive connection can be idle before being recycled (default: 30)
	KeepaliveIdleTimeout *uint32 `json:"keepaliveIdleTimeout,omitempty"`
	// How many times a TCP keepalive connection can be used before being recycled (default: 0, disabled)
	KeepaliveMaxRecycle *uint32 `json:"keepaliveMaxRecycle,omitempty"`
	// Specify network address (interface) to use for connection and data traffic. (default: disabled)
	SourceAddress string `json:"sourceAddress,omitempty"`
}

type FluentbitSpec struct {
	LoggingRef string `json:"loggingRef,omitempty"`

	DaemonSetAnnotations map[string]string `json:"daemonsetAnnotations,omitempty"`
	Annotations          map[string]string `json:"annotations,omitempty"`
	Labels               map[string]string `json:"labels,omitempty"`
	EnvVars              []corev1.EnvVar   `json:"envVars,omitempty"`
	Image                ImageSpec         `json:"image,omitempty"`
	TLS                  *FluentbitTLS     `json:"tls,omitempty"`
	TargetHost           string            `json:"targetHost,omitempty"`
	TargetPort           int32             `json:"targetPort,omitempty"`
	// Set the flush time in seconds.nanoseconds. The engine loop uses a Flush timeout to define when is required to flush the records ingested by input plugins through the defined output plugins. (default: 1)
	Flush int32 `json:"flush,omitempty"  plugin:"default:1"`
	// Set the grace time in seconds as Integer value. The engine loop uses a Grace timeout to define wait time on exit (default: 5)
	Grace int32 `json:"grace,omitempty" plugin:"default:5"`
	// Set the logging verbosity level. Allowed values are: error, warn, info, debug and trace. Values are accumulative, e.g: if 'debug' is set, it will include error, warning, info and debug.  Note that trace mode is only available if Fluent Bit was built with the WITH_TRACE option enabled. (default: info)
	LogLevel string `json:"logLevel,omitempty" plugin:"default:info"`
	// Set the coroutines stack size in bytes. The value must be greater than the page size of the running system. Don't set too small value (say 4096), or coroutine threads can overrun the stack buffer.
	// Do not change the default value of this parameter unless you know what you are doing. (default: 24576)
	CoroStackSize int32                       `json:"coroStackSize,omitempty" plugin:"default:24576"`
	Resources     corev1.ResourceRequirements `json:"resources,omitempty"`
	Tolerations   []corev1.Toleration         `json:"tolerations,omitempty"`
	NodeSelector  map[string]string           `json:"nodeSelector,omitempty"`
	Affinity      *corev1.Affinity            `json:"affinity,omitempty"`
	Metrics       *Metrics                    `json:"metrics,omitempty"`
	Security      *Security                   `json:"security,omitempty"`
	// +docLink:"volume.KubernetesVolume,https://github.com/cisco-open/operator-tools/tree/master/docs/types"
	PositionDB volume.KubernetesVolume `json:"positiondb,omitempty"`
	// Deprecated, use positiondb
	PosisionDBLegacy  *volume.KubernetesVolume `json:"position_db,omitempty"`
	MountPath         string                   `json:"mountPath,omitempty"`
	ExtraVolumeMounts []*VolumeMount           `json:"extraVolumeMounts,omitempty"`
	InputTail         InputTail                `json:"inputTail,omitempty"`
	FilterAws         *FilterAws               `json:"filterAws,omitempty"`
	FilterModify      []FilterModify           `json:"filterModify,omitempty"`
	// Deprecated, use inputTail.parser
	Parser string `json:"parser,omitempty"`
	// Parameters for Kubernetes metadata filter
	FilterKubernetes FilterKubernetes `json:"filterKubernetes,omitempty"`
	// Disable Kubernetes metadata filter
	DisableKubernetesFilter *bool         `json:"disableKubernetesFilter,omitempty"`
	BufferStorage           BufferStorage `json:"bufferStorage,omitempty"`
	// +docLink:"volume.KubernetesVolume,https://github.com/cisco-open/operator-tools/tree/master/docs/types"
	BufferStorageVolume     volume.KubernetesVolume        `json:"bufferStorageVolume,omitempty"`
	BufferVolumeMetrics     *Metrics                       `json:"bufferVolumeMetrics,omitempty"`
	BufferVolumeImage       ImageSpec                      `json:"bufferVolumeImage,omitempty"`
	BufferVolumeArgs        []string                       `json:"bufferVolumeArgs,omitempty"`
	BufferVolumeResources   corev1.ResourceRequirements    `json:"bufferVolumeResources,omitempty"`
	CustomConfigSecret      string                         `json:"customConfigSecret,omitempty"`
	PodPriorityClassName    string                         `json:"podPriorityClassName,omitempty"`
	LivenessProbe           *corev1.Probe                  `json:"livenessProbe,omitempty"`
	LivenessDefaultCheck    bool                           `json:"livenessDefaultCheck,omitempty"`
	ReadinessProbe          *corev1.Probe                  `json:"readinessProbe,omitempty"`
	Network                 *FluentbitNetwork              `json:"network,omitempty"`
	ForwardOptions          *ForwardOptions                `json:"forwardOptions,omitempty"`
	EnableUpstream          bool                           `json:"enableUpstream,omitempty"`
	ServiceAccountOverrides *typeoverride.ServiceAccount   `json:"serviceAccount,omitempty"`
	DNSPolicy               corev1.DNSPolicy               `json:"dnsPolicy,omitempty"`
	DNSConfig               *corev1.PodDNSConfig           `json:"dnsConfig,omitempty"`
	HostNetwork             bool                           `json:"HostNetwork,omitempty"`
	SyslogNGOutput          *FluentbitTCPOutput            `json:"syslogng_output,omitempty"`
	UpdateStrategy          appsv1.DaemonSetUpdateStrategy `json:"updateStrategy,omitempty"`
	// Specify a custom parser file to load in addition to the default parsers file.
	// It must be a valid key in the configmap specified by customConfig
	CustomParsers string       `json:"customParsers,omitempty"`
	HealthCheck   *HealthCheck `json:"healthCheck,omitempty"`
}

type FluentbitStatus struct {
}

type FluentbitTCPOutput struct {
	JsonDateKey    string `json:"json_date_key,omitempty" plugin:"default:ts"`
	JsonDateFormat string `json:"json_date_format,omitempty" plugin:"default:iso8601"`
	Workers        *int   `json:"Workers,omitempty"`
}

type FluentbitTLS struct {
	Enabled    *bool  `json:"enabled"`
	SecretName string `json:"secretName,omitempty"`
	SharedKey  string `json:"sharedKey,omitempty"`
}

type FluentdDrainConfig struct {
	// Should buffers on persistent volumes left after scaling down the statefulset be drained
	Enabled bool `json:"enabled,omitempty"`
	// Annotations to use for the drain watch sidecar
	Annotations map[string]string `json:"annotations,omitempty"`
	// Labels to use for the drain watch sidecar on top of labels added by the operator by default. Default values can be overwritten.
	Labels map[string]string `json:"labels,omitempty"`
	// Should persistent volume claims be deleted after draining is done
	DeleteVolume bool      `json:"deleteVolume,omitempty"`
	Image        ImageSpec `json:"image,omitempty"`
	// Container image to use for the fluentd placeholder pod
	PauseImage ImageSpec `json:"pauseImage,omitempty"`
	// Configurable resource requirements for the drainer sidecar container. Default 20m cpu request, 20M memory limit
	Resources *corev1.ResourceRequirements `json:"resources,omitempty"`
	// Configurable security context, uses fluentd pods' security context by default
	SecurityContext *corev1.SecurityContext `json:"securityContext,omitempty"`
}

type FluentdScaling struct {
	Replicas            int                `json:"replicas,omitempty"`
	PodManagementPolicy string             `json:"podManagementPolicy,omitempty"`
	Drain               FluentdDrainConfig `json:"drain,omitempty"`
}

type FluentdSpec struct {
	StatefulSetAnnotations map[string]string `json:"statefulsetAnnotations,omitempty"`
	Annotations            map[string]string `json:"annotations,omitempty"`
	ConfigCheckAnnotations map[string]string `json:"configCheckAnnotations,omitempty"`
	Labels                 map[string]string `json:"labels,omitempty"`
	EnvVars                []corev1.EnvVar   `json:"envVars,omitempty"`
	TLS                    FluentdTLS        `json:"tls,omitempty"`
	Image                  ImageSpec         `json:"image,omitempty"`
	DisablePvc             bool              `json:"disablePvc,omitempty"`
	// BufferStorageVolume is by default configured as PVC using FluentdPvcSpec
	// +docLink:"volume.KubernetesVolume,https://github.com/cisco-open/operator-tools/tree/master/docs/types"
	BufferStorageVolume volume.KubernetesVolume `json:"bufferStorageVolume,omitempty"`
	ExtraVolumes        []ExtraVolume           `json:"extraVolumes,omitempty"`
	// Deprecated, use bufferStorageVolume
	FluentdPvcSpec          *volume.KubernetesVolume    `json:"fluentdPvcSpec,omitempty"`
	VolumeMountChmod        bool                        `json:"volumeMountChmod,omitempty"`
	VolumeModImage          ImageSpec                   `json:"volumeModImage,omitempty"`
	ConfigReloaderImage     ImageSpec                   `json:"configReloaderImage,omitempty"`
	Resources               corev1.ResourceRequirements `json:"resources,omitempty"`
	ConfigCheckResources    corev1.ResourceRequirements `json:"configCheckResources,omitempty"`
	ConfigReloaderResources corev1.ResourceRequirements `json:"configReloaderResources,omitempty"`
	LivenessProbe           *corev1.Probe               `json:"livenessProbe,omitempty"`
	LivenessDefaultCheck    bool                        `json:"livenessDefaultCheck,omitempty"`
	ReadinessProbe          *corev1.Probe               `json:"readinessProbe,omitempty"`
	ReadinessDefaultCheck   ReadinessDefaultCheck       `json:"readinessDefaultCheck,omitempty"`
	// Fluentd port inside the container (24240 by default)
	// The headless service port is controlled by this field as well
	// Note, that the default ClusterIP service port is always 24240 regardless of this field
	Port                      int32                             `json:"port,omitempty"`
	Tolerations               []corev1.Toleration               `json:"tolerations,omitempty"`
	NodeSelector              map[string]string                 `json:"nodeSelector,omitempty"`
	Affinity                  *corev1.Affinity                  `json:"affinity,omitempty"`
	TopologySpreadConstraints []corev1.TopologySpreadConstraint `json:"topologySpreadConstraints,omitempty"`
	Metrics                   *Metrics                          `json:"metrics,omitempty"`
	BufferVolumeMetrics       *Metrics                          `json:"bufferVolumeMetrics,omitempty"`
	BufferVolumeImage         ImageSpec                         `json:"bufferVolumeImage,omitempty"`
	BufferVolumeArgs          []string                          `json:"bufferVolumeArgs,omitempty"`
	BufferVolumeResources     corev1.ResourceRequirements       `json:"bufferVolumeResources,omitempty"`
	Security                  *Security                         `json:"security,omitempty"`
	Scaling                   *FluentdScaling                   `json:"scaling,omitempty"`
	Workers                   int32                             `json:"workers,omitempty"`
	RootDir                   string                            `json:"rootDir,omitempty"`
	// +kubebuilder:validation:enum=fatal,error,warn,info,debug,trace
	LogLevel string `json:"logLevel,omitempty"`
	// Ignore same log lines
	// +docLink:"more info, https://docs.fluentd.org/deployment/logging#ignore_same_log_interval"
	IgnoreSameLogInterval string `json:"ignoreSameLogInterval,omitempty"`
	// Ignore repeated log lines
	// +docLink:"more info, https://docs.fluentd.org/deployment/logging#ignore_repeated_log_interval"
	IgnoreRepeatedLogInterval string `json:"ignoreRepeatedLogInterval,omitempty"`
	// Allows Time object in buffer's MessagePack serde
	// +docLink:"more info, https://docs.fluentd.org/deployment/system-config#enable_msgpack_time_support"
	EnableMsgpackTimeSupport bool   `json:"enableMsgpackTimeSupport,omitempty"`
	PodPriorityClassName     string `json:"podPriorityClassName,omitempty"`
	// +kubebuilder:validation:enum=stdout,null
	FluentLogDestination string `json:"fluentLogDestination,omitempty"`
	// FluentOutLogrotate sends fluent's stdout to file and rotates it
	FluentOutLogrotate      *FluentOutLogrotate          `json:"fluentOutLogrotate,omitempty"`
	ForwardInputConfig      *input.ForwardInputConfig    `json:"forwardInputConfig,omitempty"`
	ServiceAccountOverrides *typeoverride.ServiceAccount `json:"serviceAccount,omitempty"`
	DNSPolicy               corev1.DNSPolicy             `json:"dnsPolicy,omitempty"`
	DNSConfig               *corev1.PodDNSConfig         `json:"dnsConfig,omitempty"`
	ExtraArgs               []string                     `json:"extraArgs,omitempty"`
	CompressConfigFile      bool                         `json:"compressConfigFile,omitempty"`
}

type FluentdTLS struct {
	Enabled    bool   `json:"enabled"`
	SecretName string `json:"secretName,omitempty"`
	SharedKey  string `json:"sharedKey,omitempty"`
}

type ForwardOptions struct {
	TimeAsInteger      bool   `json:"Time_as_Integer,omitempty"`
	SendOptions        bool   `json:"Send_options,omitempty"`
	RequireAckResponse bool   `json:"Require_ack_response,omitempty"`
	Tag                string `json:"Tag,omitempty"`
	RetryLimit         string `json:"Retry_Limit,omitempty"`
	// `storage.total_limit_size` Limit the maximum number of Chunks in the filesystem for the current output logical destination.
	StorageTotalLimitSize string `json:"storage.total_limit_size,omitempty"`
	// Enables dedicated thread(s) for this output. Default value (2) is set since version 1.8.13. For previous versions is 0.
	Workers *int `json:"Workers,omitempty"`
}

type GlobalOptions struct {
	// deprecated use stats/level from 4.1+
	StatsLevel *int `json:"stats_level,omitempty"`
	// deprecated use stats/freq from 4.1+
	StatsFreq *int `json:"stats_freq,omitempty"`
	// Stats https://axoflow.com/docs/axosyslog-core/chapter-global-options/reference-options/#global-option-stats
	Stats *Stats `json:"stats,omitempty"`
	// Log level https://axoflow.com/docs/axosyslog-core/chapter-global-options/reference-options/#global-options-log-level
	LogLevel *string `json:"log_level,omitempty"`
}

type HealthCheck struct {
	// The error count to meet the unhealthy requirement, this is a sum for all output plugins in a defined HC_Period. (default:5)
	HCErrorsCount int `json:"hcErrorsCount,omitempty"`
	// The retry failure count to meet the unhealthy requirement, this is a sum for all output plugins in a defined HC_Period (default:5)
	HCRetryFailureCount int `json:"hcRetryFailureCount,omitempty"`
	// The time period by second to count the error and retry failure data point (default:60)
	HCPeriod int `json:"hcPeriod,omitempty"`
}

type ImageSpec struct {
	Repository       string                        `json:"repository,omitempty"`
	Tag              string                        `json:"tag,omitempty"`
	PullPolicy       string                        `json:"pullPolicy,omitempty"`
	ImagePullSecrets []corev1.LocalObjectReference `json:"imagePullSecrets,omitempty"`
}

type InlineNodeAgent struct {
	//InlineNodeAgent unique name.
	Name string `json:"name,omitempty"`

	NodeAgentConfig `json:",inline"`
}

type InputTail struct {
	// Specify the buffering mechanism to use. It can be memory or filesystem. (default:memory)
	StorageType string `json:"storage.type,omitempty"`
	// Set the buffer size for HTTP client when reading responses from Kubernetes API server. The value must be according to the Unit Size specification. (default:32k)
	BufferChunkSize string `json:"Buffer_Chunk_Size,omitempty"`
	// Set the limit of the buffer size per monitored file. When a buffer needs to be increased (e.g: very long lines), this value is used to restrict how much the memory buffer can grow. If reading a file exceed this limit, the file is removed from the monitored file list. The value must be according to the Unit Size specification. (default:Buffer_Chunk_Size)
	BufferMaxSize string `json:"Buffer_Max_Size,omitempty"`
	// Pattern specifying a specific log files or multiple ones through the use of common wildcards.
	Path string `json:"Path,omitempty"`
	// If enabled, it appends the name of the monitored file as part of the record. The value assigned becomes the key in the map.
	PathKey string `json:"Path_Key,omitempty"`
	// Set one or multiple shell patterns separated by commas to exclude files matching a certain criteria, e.g: exclude_path=*.gz,*.zip
	ExcludePath string `json:"Exclude_Path,omitempty"`
	// For new discovered files on start (without a database offset/position), read the content from the head of the file, not tail.
	ReadFromHead bool `json:"Read_From_Head,omitempty"`
	// The interval of refreshing the list of watched files in seconds. (default:60)
	RefreshInterval string `json:"Refresh_Interval,omitempty"`
	// Specify the number of extra time in seconds to monitor a file once is rotated in case some pending data is flushed. (default:5)
	RotateWait string `json:"Rotate_Wait,omitempty"`
	// Ignores files that have been last modified before this time in seconds. Supports m,h,d (minutes, hours,days) syntax. Default behavior is to read all specified files.
	IgnoreOlder string `json:"Ignore_Older,omitempty"`
	// When a monitored file reach it buffer capacity due to a very long line (Buffer_Max_Size), the default behavior is to stop monitoring that file. Skip_Long_Lines alter that behavior and instruct Fluent Bit to skip long lines and continue processing other lines that fits into the buffer size. (default:Off)
	SkipLongLines string `json:"Skip_Long_Lines,omitempty"`
	// Specify the database file to keep track of monitored files and offsets.
	DB *string `json:"DB,omitempty"`
	// Set a default synchronization (I/O) method. Values: Extra, Full, Normal, Off. This flag affects how the internal SQLite engine do synchronization to disk, for more details about each option please refer to this section. (default:Full)
	DBSync string `json:"DB_Sync,omitempty"`
	// Specify that the database will be accessed only by Fluent Bit. Enabling this feature helps to increase performance when accessing the database but it restrict any external tool to query the content. (default: true)
	DBLocking *bool `json:"DB.locking,omitempty"`
	// sets the journal mode for databases (WAL). Enabling WAL provides higher performance. Note that WAL is not compatible with shared network file systems. (default: WAL)
	DBJournalMode string `json:"DB.journal_mode,omitempty"`
	// Set a limit of memory that Tail plugin can use when appending data to the Engine. If the limit is reach, it will be paused; when the data is flushed it resumes.
	MemBufLimit string `json:"Mem_Buf_Limit,omitempty"`
	// Specify the name of a parser to interpret the entry as a structured message.
	Parser string `json:"Parser,omitempty"`
	// When a message is unstructured (no parser applied), it's appended as a string under the key name log. This option allows to define an alternative name for that key. (default:log)
	Key string `json:"Key,omitempty"`
	// Set a tag (with regex-extract fields) that will be placed on lines read.
	Tag string `json:"Tag,omitempty"`
	// Set a regex to extract fields from the file.
	TagRegex string `json:"Tag_Regex,omitempty"`
	// If enabled, the plugin will try to discover multiline messages and use the proper parsers to compose the outgoing messages. Note that when this option is enabled the Parser option is not used. (default:Off)
	Multiline string `json:"Multiline,omitempty"`
	// Wait period time in seconds to process queued multiline messages (default:4)
	MultilineFlush string `json:"Multiline_Flush,omitempty"`
	// Name of the parser that machs the beginning of a multiline message. Note that the regular expression defined in the parser must include a group name (named capture)
	ParserFirstline string `json:"Parser_Firstline,omitempty"`
	// Optional-extra parser to interpret and structure multiline entries. This option can be used to define multiple parsers, e.g: Parser_1 ab1,  Parser_2 ab2, Parser_N abN.
	ParserN []string `json:"Parser_N,omitempty"`
	// If enabled, the plugin will recombine split Docker log lines before passing them to any parser as configured above. This mode cannot be used at the same time as Multiline. (default:Off)
	DockerMode string `json:"Docker_Mode,omitempty"`
	// Specify an optional parser for the first line of the docker multiline mode.
	DockerModeParser string `json:"Docker_Mode_Parser,omitempty"`
	// Wait period time in seconds to flush queued unfinished split lines. (default:4)
	DockerModeFlush string `json:"Docker_Mode_Flush,omitempty"`
	// Specify one or multiple parser definitions to apply to the content. Part of the new Multiline Core support in 1.8 (default: "")
	MultilineParser []string `json:"multiline.parser,omitempty"`
}

type Logging struct {
	metav1.TypeMeta   `json:",inline"`
	metav1.ObjectMeta `json:"metadata,omitempty"`

	Spec   LoggingSpec   `json:"spec,omitempty"`
	Status LoggingStatus `json:"status,omitempty"`
}

type LoggingList struct {
	metav1.TypeMeta `json:",inline"`
	metav1.ListMeta `json:"metadata,omitempty"`
	Items           []Logging `json:"items"`
}

type LoggingRoute struct {
	metav1.TypeMeta   `json:",inline"`
	metav1.ObjectMeta `json:"metadata,omitempty"`

	Spec   LoggingRouteSpec   `json:"spec,omitempty"`
	Status LoggingRouteStatus `json:"status,omitempty"`
}

type LoggingRouteList struct {
	metav1.TypeMeta `json:",inline"`
	metav1.ListMeta `json:"metadata,omitempty"`
	Items           []LoggingRoute `json:"items"`
}

type LoggingRouteSpec struct {
	// Source identifies the logging that this policy applies to
	Source string `json:"source"`

	// Targets refers to the list of logging resources specified by a label selector to forward logs to
	// Filtering of namespaces will happen based on the watchNamespaces and watchNamespaceSelector fields of the target logging resource
	Targets metav1.LabelSelector `json:"targets"`
}

type LoggingRouteStatus struct {
	// Enumerate all loggings with all the destination namespaces expanded
	Tenants []Tenant `json:"tenants,omitempty"`

	// Enumerate problems that prohibits this route to take effect and populate the tenants field
	Problems []string `json:"problems,omitempty"`

	// Summarize the number of problems for the CLI output
	ProblemsCount int `json:"problemsCount,omitempty"`

	// Enumerate non-blocker issues the user should pay attention to
	Notices []string `json:"notices,omitempty"`

	// Summarize the number of notices for the CLI output
	NoticesCount int `json:"noticesCount,omitempty"`
}

type LoggingSpec struct {
	// Reference to the logging system. Each of the `loggingRef`s can manage a fluentbit daemonset and a fluentd statefulset.
	LoggingRef string `json:"loggingRef,omitempty"`
	// Disable configuration check before applying new fluentd configuration.
	FlowConfigCheckDisabled bool `json:"flowConfigCheckDisabled,omitempty"`
	// Whether to skip invalid Flow and ClusterFlow resources
	SkipInvalidResources bool `json:"skipInvalidResources,omitempty"`
	// Override generated config. This is a *raw* configuration string for troubleshooting purposes.
	FlowConfigOverride string `json:"flowConfigOverride,omitempty"`
	// ConfigCheck settings that apply to both fluentd and syslog-ng
	ConfigCheck ConfigCheck `json:"configCheck,omitempty"`
	// FluentbitAgent daemonset configuration.
	// Deprecated, will be removed with next major version
	// Migrate to the standalone NodeAgent resource
	FluentbitSpec *FluentbitSpec `json:"fluentbit,omitempty"`
	// Fluentd statefulset configuration
	FluentdSpec *FluentdSpec `json:"fluentd,omitempty"`
	// Syslog-NG statefulset configuration
	SyslogNGSpec *SyslogNGSpec `json:"syslogNG,omitempty"`
	// Default flow for unmatched logs. This Flow configuration collects all logs that didn't matched any other Flow.
	DefaultFlowSpec *DefaultFlowSpec `json:"defaultFlow,omitempty"`
	// GlobalOutput name to flush ERROR events to
	ErrorOutputRef string `json:"errorOutputRef,omitempty"`
	// Global filters to apply on logs before any match or filter mechanism.
	GlobalFilters []Filter `json:"globalFilters,omitempty"`
	// Limit namespaces to watch Flow and Output custom resources.
	WatchNamespaces []string `json:"watchNamespaces,omitempty"`
	// WatchNamespaceSelector is a LabelSelector to find matching namespaces to watch as in WatchNamespaces
	WatchNamespaceSelector *metav1.LabelSelector `json:"watchNamespaceSelector,omitempty"`
	// Cluster domain name to be used when templating URLs to services (default: "cluster.local.").
	ClusterDomain *string `json:"clusterDomain,omitempty"`
	// Namespace for cluster wide configuration resources like CLusterFlow and ClusterOutput.
	// This should be a protected namespace from regular users.
	// Resources like fluentbit and fluentd will run in this namespace as well.
	ControlNamespace string `json:"controlNamespace"`
	// Allow configuration of cluster resources from any namespace. Mutually exclusive with ControlNamespace restriction of Cluster resources
	AllowClusterResourcesFromAllNamespaces bool `json:"allowClusterResourcesFromAllNamespaces,omitempty"`
	// InlineNodeAgent Configuration
	// Deprecated, will be removed with next major version
	NodeAgents []*InlineNodeAgent `json:"nodeAgents,omitempty"`
	// EnableRecreateWorkloadOnImmutableFieldChange enables the operator to recreate the
	// fluentbit daemonset and the fluentd statefulset (and possibly other resource in the future)
	// in case there is a change in an immutable field
	// that otherwise couldn't be managed with a simple update.
	EnableRecreateWorkloadOnImmutableFieldChange bool `json:"enableRecreateWorkloadOnImmutableFieldChange,omitempty"`
}

type LoggingStatus struct {
	// Result of the config check. Under normal conditions there is a single item in the map with a bool value.
	ConfigCheckResults map[string]bool `json:"configCheckResults,omitempty"`

	// Problems with the logging resource
	Problems []string `json:"problems,omitempty"`
	// Count of problems for printcolumn
	ProblemsCount int `json:"problemsCount,omitempty"`
	// List of namespaces that watchNamespaces + watchNamespaceSelector is resolving to.
	// Not set means all namespaces.
	WatchNamespaces []string `json:"watchNamespaces,omitempty"`
}

type Match struct {
	*Select  `json:"select,omitempty"`
	*Exclude `json:"exclude,omitempty"`
}

type Metrics struct {
	Interval              string               `json:"interval,omitempty"`
	Timeout               string               `json:"timeout,omitempty"`
	Port                  int32                `json:"port,omitempty"`
	Path                  string               `json:"path,omitempty"`
	ServiceMonitor        bool                 `json:"serviceMonitor,omitempty"`
	ServiceMonitorConfig  ServiceMonitorConfig `json:"serviceMonitorConfig,omitempty"`
	PrometheusAnnotations bool                 `json:"prometheusAnnotations,omitempty"`
	PrometheusRules       bool                 `json:"prometheusRules,omitempty"`
}

type NodeAgent struct {
	metav1.TypeMeta   `json:",inline"`
	metav1.ObjectMeta `json:"metadata,omitempty"`

	Spec   NodeAgentSpec   `json:"spec,omitempty"`
	Status NodeAgentStatus `json:"status,omitempty"`
}

type NodeAgentConfig struct {
	Profile       string              `json:"profile,omitempty"`
	Metadata      types.MetaBase      `json:"metadata,omitempty"`
	FluentbitSpec *NodeAgentFluentbit `json:"nodeAgentFluentbit,omitempty"`
}

type NodeAgentFluentbit struct {
	Enabled                 *bool                        `json:"enabled,omitempty"`
	DaemonSetOverrides      *typeoverride.DaemonSet      `json:"daemonSet,omitempty"`
	ServiceAccountOverrides *typeoverride.ServiceAccount `json:"serviceAccount,omitempty"`
	TLS                     *FluentbitTLS                `json:"tls,omitempty"`
	TargetHost              string                       `json:"targetHost,omitempty"`
	TargetPort              int32                        `json:"targetPort,omitempty"`
	// Set the flush time in seconds.nanoseconds. The engine loop uses a Flush timeout to define when is required to flush the records ingested by input plugins through the defined output plugins. (default: 1)
	Flush int32 `json:"flush,omitempty"  plugin:"default:1"`
	// Set the grace time in seconds as Integer value. The engine loop uses a Grace timeout to define wait time on exit (default: 5)
	Grace int32 `json:"grace,omitempty" plugin:"default:5"`
	// Set the logging verbosity level. Allowed values are: error, warn, info, debug and trace. Values are accumulative, e.g: if 'debug' is set, it will include error, warning, info and debug.  Note that trace mode is only available if Fluent Bit was built with the WITH_TRACE option enabled. (default: info)
	LogLevel string `json:"logLevel,omitempty" plugin:"default:info"`
	// Set the coroutines stack size in bytes. The value must be greater than the page size of the running system. Don't set too small value (say 4096), or coroutine threads can overrun the stack buffer.
	//Do not change the default value of this parameter unless you know what you are doing. (default: 24576)
	CoroStackSize  int32                 `json:"coroStackSize,omitempty" plugin:"default:24576"`
	Metrics        *Metrics              `json:"metrics,omitempty"`
	MetricsService *typeoverride.Service `json:"metricsService,omitempty"`
	Security       *Security             `json:"security,omitempty"`
	// +docLink:"volume.KubernetesVolume,https://github.com/cisco-open/operator-tools/tree/master/docs/types"
	PositionDB              volume.KubernetesVolume `json:"positiondb,omitempty"`
	ContainersPath          string                  `json:"containersPath,omitempty"`
	VarLogsPath             string                  `json:"varLogsPath,omitempty"`
	ExtraVolumeMounts       []*VolumeMount          `json:"extraVolumeMounts,omitempty"`
	InputTail               InputTail               `json:"inputTail,omitempty"`
	FilterAws               *FilterAws              `json:"filterAws,omitempty"`
	FilterKubernetes        FilterKubernetes        `json:"filterKubernetes,omitempty"`
	DisableKubernetesFilter *bool                   `json:"disableKubernetesFilter,omitempty"`
	BufferStorage           BufferStorage           `json:"bufferStorage,omitempty"`
	// +docLink:"volume.KubernetesVolume,https://github.com/cisco-open/operator-tools/tree/master/docs/types"
	BufferStorageVolume  volume.KubernetesVolume `json:"bufferStorageVolume,omitempty"`
	CustomConfigSecret   string                  `json:"customConfigSecret,omitempty"`
	PodPriorityClassName string                  `json:"podPriorityClassName,omitempty"`
	LivenessDefaultCheck *bool                   `json:"livenessDefaultCheck,omitempty" plugin:"default:true"`
	Network              *FluentbitNetwork       `json:"network,omitempty"`
	ForwardOptions       *ForwardOptions         `json:"forwardOptions,omitempty"`
	EnableUpstream       *bool                   `json:"enableUpstream,omitempty"`
}

type NodeAgentList struct {
	metav1.TypeMeta `json:",inline"`
	metav1.ListMeta `json:"metadata,omitempty"`
	Items           []NodeAgent `json:"items"`
}

type NodeAgentSpec struct {
	LoggingRef string `json:"loggingRef,omitempty"`

	//InlineNodeAgent
	NodeAgentConfig `json:",inline"`
}

type NodeAgentStatus struct {
}

type Operation struct {
	Op    string `json:"Op,omitempty"`
	Key   string `json:"Key,omitempty"`
	Value string `json:"Value,omitempty"`
}

type Output struct {
	metav1.TypeMeta   `json:",inline"`
	metav1.ObjectMeta `json:"metadata,omitempty"`

	Spec   OutputSpec   `json:"spec,omitempty"`
	Status OutputStatus `json:"status,omitempty"`
}

type OutputList struct {
	metav1.TypeMeta `json:",inline"`
	metav1.ListMeta `json:"metadata,omitempty"`
	Items           []Output `json:"items"`
}

type OutputSpec struct {
	LoggingRef                   string                               `json:"loggingRef,omitempty"`
	S3OutputConfig               *output.S3OutputConfig               `json:"s3,omitempty"`
	AzureStorage                 *output.AzureStorage                 `json:"azurestorage,omitempty"`
	GCSOutput                    *output.GCSOutput                    `json:"gcs,omitempty"`
	OSSOutput                    *output.OSSOutput                    `json:"oss,omitempty"`
	ElasticsearchOutput          *output.ElasticsearchOutput          `json:"elasticsearch,omitempty"`
	OpenSearchOutput             *output.OpenSearchOutput             `json:"opensearch,omitempty"`
	LogZOutput                   *output.LogZOutput                   `json:"logz,omitempty"`
	LokiOutput                   *output.LokiOutput                   `json:"loki,omitempty"`
	SumologicOutput              *output.SumologicOutput              `json:"sumologic,omitempty"`
	DatadogOutput                *output.DatadogOutput                `json:"datadog,omitempty"`
	ForwardOutput                *output.ForwardOutput                `json:"forward,omitempty"`
	FileOutput                   *output.FileOutputConfig             `json:"file,omitempty"`
	NullOutputConfig             *output.NullOutputConfig             `json:"nullout,omitempty"`
	KafkaOutputConfig            *output.KafkaOutputConfig            `json:"kafka,omitempty"`
	CloudWatchOutput             *output.CloudWatchOutput             `json:"cloudwatch,omitempty"`
	KinesisFirehoseOutputConfig  *output.KinesisFirehoseOutputConfig  `json:"kinesisFirehose,omitempty"`
	KinesisStreamOutputConfig    *output.KinesisStreamOutputConfig    `json:"kinesisStream,omitempty"`
	LogDNAOutput                 *output.LogDNAOutput                 `json:"logdna,omitempty"`
	NewRelicOutputConfig         *output.NewRelicOutputConfig         `json:"newrelic,omitempty"`
	SplunkHecOutput              *output.SplunkHecOutput              `json:"splunkHec,omitempty"`
	HTTPOutput                   *output.HTTPOutputConfig             `json:"http,omitempty"`
	AwsElasticsearchOutputConfig *output.AwsElasticsearchOutputConfig `json:"awsElasticsearch,omitempty"`
	RedisOutputConfig            *output.RedisOutputConfig            `json:"redis,omitempty"`
	SyslogOutputConfig           *output.SyslogOutputConfig           `json:"syslog,omitempty"`
	GELFOutputConfig             *output.GELFOutputConfig             `json:"gelf,omitempty"`
	SQSOutputConfig              *output.SQSOutputConfig              `json:"sqs,omitempty"`
	MattermostOutputConfig       *output.MattermostOutputConfig       `json:"mattermost,omitempty"`
	RelabelOutputConfig          *output.RelabelOutputConfig          `json:"relabel,omitempty"`
}

type OutputStatus struct {
	Active        *bool    `json:"active,omitempty"`
	Problems      []string `json:"problems,omitempty"`
	ProblemsCount int      `json:"problemsCount,omitempty"`
}

type ReadinessDefaultCheck struct {
	// Enable default Readiness check it'll fail if the buffer volume free space exceeds the `readinessDefaultThreshold` percentage (90%).
	BufferFreeSpace          bool  `json:"bufferFreeSpace,omitempty"`
	BufferFreeSpaceThreshold int32 `json:"bufferFreeSpaceThreshold,omitempty"`
	BufferFileNumber         bool  `json:"bufferFileNumber,omitempty"`
	BufferFileNumberMax      int32 `json:"bufferFileNumberMax,omitempty"`
	InitialDelaySeconds      int32 `json:"initialDelaySeconds,omitempty"`
	TimeoutSeconds           int32 `json:"timeoutSeconds,omitempty"`
	PeriodSeconds            int32 `json:"periodSeconds,omitempty"`
	SuccessThreshold         int32 `json:"successThreshold,omitempty"`
	FailureThreshold         int32 `json:"failureThreshold,omitempty"`
}

type Security struct {
	ServiceAccount               string                     `json:"serviceAccount,omitempty"`
	RoleBasedAccessControlCreate *bool                      `json:"roleBasedAccessControlCreate,omitempty"`
	PodSecurityPolicyCreate      bool                       `json:"podSecurityPolicyCreate,omitempty"`
	SecurityContext              *corev1.SecurityContext    `json:"securityContext,omitempty"`
	PodSecurityContext           *corev1.PodSecurityContext `json:"podSecurityContext,omitempty"`
}

type Select struct {
	Labels         map[string]string `json:"labels,omitempty"`
	Hosts          []string          `json:"hosts,omitempty"`
	ContainerNames []string          `json:"container_names,omitempty"`
}

type ServiceMonitorConfig struct {
	AdditionalLabels   map[string]string   `json:"additionalLabels,omitempty"`
	HonorLabels        bool                `json:"honorLabels,omitempty"`
	Relabelings        []*v1.RelabelConfig `json:"relabelings,omitempty"`
	MetricsRelabelings []*v1.RelabelConfig `json:"metricRelabelings,omitempty"`
	Scheme             string              `json:"scheme,omitempty"`
	TLSConfig          *v1.TLSConfig       `json:"tlsConfig,omitempty"`
}

type Stats struct {
	Level *int `json:"level,omitempty"`
	Freq  *int `json:"freq,omitempty"`
}

type SyslogNGClusterFlow struct {
	metav1.TypeMeta   `json:",inline"`
	metav1.ObjectMeta `json:"metadata,omitempty"`

	Spec   SyslogNGClusterFlowSpec `json:"spec,omitempty"`
	Status SyslogNGFlowStatus      `json:"status,omitempty"`
}

type SyslogNGClusterFlowList struct {
	metav1.TypeMeta `json:",inline"`
	metav1.ListMeta `json:"metadata,omitempty"`
	Items           []SyslogNGClusterFlow `json:"items"`
}

type SyslogNGClusterFlowSpec struct {
	Match            *SyslogNGMatch   `json:"match,omitempty"`
	Filters          []SyslogNGFilter `json:"filters,omitempty"`
	LoggingRef       string           `json:"loggingRef,omitempty"`
	GlobalOutputRefs []string         `json:"globalOutputRefs,omitempty"`
}

type SyslogNGClusterMatch SyslogNGMatch

type SyslogNGClusterOutput struct {
	metav1.TypeMeta   `json:",inline"`
	metav1.ObjectMeta `json:"metadata,omitempty"`

	Spec   SyslogNGClusterOutputSpec `json:"spec"`
	Status SyslogNGOutputStatus      `json:"status,omitempty"`
}

type SyslogNGClusterOutputList struct {
	metav1.TypeMeta `json:",inline"`
	metav1.ListMeta `json:"metadata,omitempty"`
	Items           []SyslogNGClusterOutput `json:"items"`
}

type SyslogNGClusterOutputSpec struct {
	SyslogNGOutputSpec `json:",inline"`
	EnabledNamespaces  []string `json:"enabledNamespaces,omitempty"`
}

type SyslogNGFilter struct {
	ID      string                 `json:"id,omitempty" syslog-ng:"ignore"`
	Match   *filter.MatchConfig    `json:"match,omitempty" syslog-ng:"xform-kind=filter"`
	Rewrite []filter.RewriteConfig `json:"rewrite,omitempty" syslog-ng:"xform-kind=rewrite"`
	Parser  *filter.ParserConfig   `json:"parser,omitempty" syslog-ng:"xform-kind=parser"`
}

type SyslogNGFlow struct {
	metav1.TypeMeta   `json:",inline"`
	metav1.ObjectMeta `json:"metadata,omitempty"`

	Spec   SyslogNGFlowSpec   `json:"spec,omitempty"`
	Status SyslogNGFlowStatus `json:"status,omitempty"`
}

type SyslogNGFlowList struct {
	metav1.TypeMeta `json:",inline"`
	metav1.ListMeta `json:"metadata,omitempty"`
	Items           []SyslogNGFlow `json:"items"`
}

type SyslogNGFlowSpec struct {
	Match            *SyslogNGMatch   `json:"match,omitempty"`
	Filters          []SyslogNGFilter `json:"filters,omitempty"`
	LoggingRef       string           `json:"loggingRef,omitempty"`
	GlobalOutputRefs []string         `json:"globalOutputRefs,omitempty"`
	LocalOutputRefs  []string         `json:"localOutputRefs,omitempty"`
}

type SyslogNGFlowStatus FlowStatus

type SyslogNGMatch filter.MatchExpr

type SyslogNGOutput struct {
	metav1.TypeMeta   `json:",inline"`
	metav1.ObjectMeta `json:"metadata,omitempty"`

	Spec   SyslogNGOutputSpec   `json:"spec,omitempty"`
	Status SyslogNGOutputStatus `json:"status,omitempty"`
}

type SyslogNGOutputList struct {
	metav1.TypeMeta `json:",inline"`
	metav1.ListMeta `json:"metadata,omitempty"`
	Items           []SyslogNGOutput `json:"items"`
}

type SyslogNGOutputSpec struct {
	LoggingRef      string                        `json:"loggingRef,omitempty"`
	Loggly          *output.Loggly                `json:"loggly,omitempty" syslog-ng:"dest-drv"`
	Syslog          *output.SyslogOutput          `json:"syslog,omitempty" syslog-ng:"dest-drv"`
	File            *output.FileOutput            `json:"file,omitempty" syslog-ng:"dest-drv"`
	MQTT            *output.MQTT                  `json:"mqtt,omitempty" syslog-ng:"dest-drv"`
	Redis           *output.RedisOutput           `json:"redis,omitempty" syslog-ng:"dest-drv"`
	MongoDB         *output.MongoDB               `json:"mongodb,omitempty" syslog-ng:"dest-drv"`
	SumologicHTTP   *output.SumologicHTTPOutput   `json:"sumologic-http,omitempty" syslog-ng:"dest-drv"`
	SumologicSyslog *output.SumologicSyslogOutput `json:"sumologic-syslog,omitempty" syslog-ng:"dest-drv"`
	HTTP            *output.HTTPOutput            `json:"http,omitempty" syslog-ng:"dest-drv"`
	Elasticsearch   *output.ElasticsearchOutput   `json:"elasticsearch,omitempty" syslog-ng:"dest-drv,name=elasticsearch-http"`
	LogScale        *output.LogScaleOutput        `json:"logscale,omitempty" syslog-ng:"dest-drv"`
	SplunkHEC       *output.SplunkHECOutput       `json:"splunk_hec_event,omitempty" syslog-ng:"dest-drv"`
	Loki            *output.LokiOutput            `json:"loki,omitempty" syslog-ng:"dest-drv"`
	S3              *output.S3Output              `json:"s3,omitempty" syslog-ng:"dest-drv"`
}

type SyslogNGOutputStatus OutputStatus

type SyslogNGSpec struct {
	TLS                                 SyslogNGTLS                  `json:"tls,omitempty"`
	ReadinessDefaultCheck               ReadinessDefaultCheck        `json:"readinessDefaultCheck,omitempty"`
	SkipRBACCreate                      bool                         `json:"skipRBACCreate,omitempty"`
	StatefulSetOverrides                *typeoverride.StatefulSet    `json:"statefulSet,omitempty"`
	ServiceOverrides                    *typeoverride.Service        `json:"service,omitempty"`
	ServiceAccountOverrides             *typeoverride.ServiceAccount `json:"serviceAccount,omitempty"`
	ConfigCheckPodOverrides             *typeoverride.PodSpec        `json:"configCheckPod,omitempty"`
	Metrics                             *Metrics                     `json:"metrics,omitempty"`
	MetricsServiceOverrides             *typeoverride.Service        `json:"metricsService,omitempty"`
	BufferVolumeMetrics                 *BufferMetrics               `json:"bufferVolumeMetrics,omitempty"`
	BufferVolumeMetricsServiceOverrides *typeoverride.Service        `json:"bufferVolumeMetricsService,omitempty"`
	GlobalOptions                       *GlobalOptions               `json:"globalOptions,omitempty"`
	JSONKeyPrefix                       string                       `json:"jsonKeyPrefix,omitempty"`
	JSONKeyDelimiter                    string                       `json:"jsonKeyDelim,omitempty"`
	MaxConnections                      int                          `json:"maxConnections,omitempty"`
	LogIWSize                           int                          `json:"logIWSize,omitempty"`
}

type SyslogNGTLS struct {
	Enabled    bool   `json:"enabled"`
	SecretName string `json:"secretName,omitempty"`
	SharedKey  string `json:"sharedKey,omitempty"`
}

type Tenant struct {
	Name       string   `json:"name"`
	Namespaces []string `json:"namespaces,omitempty"`
}

type VolumeMount struct {
	// Source folder
	// +kubebuilder:validation:Pattern=^/.+$
	Source string `json:"source"`
	// Destination Folder
	// +kubebuilder:validation:Pattern=^/.+$
	Destination string `json:"destination"`
	// Mount Mode
	ReadOnly *bool `json:"readOnly,omitempty"`
}