source2image

type AuthConfig struct {
	Username      string                       `json:"username,omitempty"`
	Password      string                       `json:"password,omitempty"`
	Email         string                       `json:"email,omitempty"`
	ServerAddress string                       `json:"serverAddress,omitempty"`
	SecretRef     *corev1.LocalObjectReference `json:"secretRef,omitempty"`
}

type CGroupLimits struct {
	MemoryLimitBytes int64  `json:"memoryLimitBytes"`
	CPUShares        int64  `json:"cpuShares"`
	CPUPeriod        int64  `json:"cpuPeriod"`
	CPUQuota         int64  `json:"cpuQuota"`
	MemorySwap       int64  `json:"memorySwap"`
	Parent           string `json:"parent"`
}

type CodeFramework string

type ContainerConfig struct {
	Labels map[string]string
	Env    []string
}

type ContainerInfo struct {
	//BaseImage are the images this template will use.
	BuilderImage     string       `json:"builderImage,omitempty"`
	RuntimeImage     string       `json:"runtimeImage,omitempty"`
	RuntimeArtifacts []VolumeSpec `json:"runtimeArtifacts,omitempty"`
	// BuildVolumes specifies a list of volumes to mount to container running the
	// build.
	BuildVolumes []string `json:"buildVolumes,omitempty"`
}

type DockerConfig struct {
	// Endpoint is the docker network endpoint or socket
	Endpoint string `json:"endPoint"`

	// CertFile is the certificate file path for a TLS connection
	CertFile string `json:"certFile"`

	// KeyFile is the key file path for a TLS connection
	KeyFile string `json:"keyFile"`

	// CAFile is the certificate authority file path for a TLS connection
	CAFile string `json:"caFile"`

	// UseTLS indicates if TLS must be used
	UseTLS bool `json:"useTLS"`

	// TLSVerify indicates if TLS peer must be verified
	TLSVerify bool `json:"tlsVerify"`
}

type DockerConfigEntry struct {
	Username      string `json:"username"`
	Password      string `json:"password"`
	Email         string `json:"email"`
	ServerAddress string `json:"serverAddress,omitempty"`
}

type DockerConfigJson struct {
	Auths DockerConfigMap `json:"auths"`
}

type DockerConfigMap map[string]DockerConfigEntry

type DockerNetworkMode string

type EnvironmentSpec struct {
	Name  string `json:"name"`
	Value string `json:"value"`
}

type Parameter struct {
	Description  string   `json:"description,omitempty"`
	Key          string   `json:"key,omitempty"`
	Type         string   `json:"type,omitempty"`
	OptValues    []string `json:"optValues,omitempty"`
	Required     bool     `json:"required,omitempty"`
	DefaultValue string   `json:"defaultValue,omitempty"`
	Value        string   `json:"value,omitempty"`
}

type ProxyConfig struct {
	HTTPProxy  string `json:"httpProxy,omitempty"`
	HTTPSProxy string `json:"httpsProxy,omitempty"`
}

type PullPolicy string

type RunState string

type S2iAutoScale struct {
	Kind         string   `json:"kind"`
	Name         string   `json:"name"`
	InitReplicas *int32   `json:"initReplicas,omitempty"`
	Containers   []string `json:"containers,omitempty"`
}

type S2iBuilder struct {
	metav1.TypeMeta   `json:",inline"`
	metav1.ObjectMeta `json:"metadata,omitempty"`

	Spec   S2iBuilderSpec   `json:"spec,omitempty"`
	Status S2iBuilderStatus `json:"status,omitempty"`
}

type S2iBuilderList struct {
	metav1.TypeMeta `json:",inline"`
	metav1.ListMeta `json:"metadata,omitempty"`
	Items           []S2iBuilder `json:"items"`
}

type S2iBuilderSpec struct {
	// INSERT ADDITIONAL SPEC FIELDS - desired state of cluster
	// Important: Run "make" to regenerate code after modifying this file
	Config *S2iConfig `json:"config,omitempty"`
	//FromTemplate define some inputs from user
	FromTemplate *UserDefineTemplate `json:"fromTemplate,omitempty"`
}

type S2iBuilderStatus struct {
	//RunCount represent the sum of s2irun of this builder
	RunCount int `json:"runCount"`
	//LastRunState return the state of the newest run of this builder
	LastRunState RunState `json:"lastRunState,omitempty"`
	//LastRunState return the name of the newest run of this builder
	LastRunName *string `json:"lastRunName,omitempty"`
	//LastRunStartTime return the startTime of the newest run of this builder
	LastRunStartTime *metav1.Time `json:"lastRunStartTime,omitempty"`
}

type S2iBuilderTemplate struct {
	metav1.TypeMeta   `json:",inline"`
	metav1.ObjectMeta `json:"metadata,omitempty"`

	Spec   S2iBuilderTemplateSpec   `json:"spec,omitempty"`
	Status S2iBuilderTemplateStatus `json:"status,omitempty"`
}

type S2iBuilderTemplateList struct {
	metav1.TypeMeta `json:",inline"`
	metav1.ListMeta `json:"metadata,omitempty"`
	Items           []S2iBuilderTemplate `json:"items"`
}

type S2iBuilderTemplateSpec struct {
	//DefaultBaseImage is the image that will be used by default
	DefaultBaseImage string `json:"defaultBaseImage,omitempty"`
	//Images are the images this template will use.
	ContainerInfo []ContainerInfo `json:"containerInfo,omitempty"`
	//CodeFramework means which language this template is designed for and which framework is using if has framework. Like Java, NodeJS etc
	CodeFramework CodeFramework `json:"codeFramework,omitempty"`
	// Parameters is a set of environment variables to be passed to the image.
	Parameters []Parameter `json:"environment,omitempty"`
	// Version of template
	Version string `json:"version,omitempty"`
	// Description illustrate the purpose of this template
	Description string `json:"description,omitempty"`
	// IconPath is used for frontend display
	IconPath string `json:"iconPath,omitempty"`
}

type S2iBuilderTemplateStatus struct {
}

type S2iConfig struct {
	// DisplayName is a result image display-name label. This defaults to the
	// output image name.
	DisplayName string `json:"displayName,omitempty"`

	// Description is a result image description label. The default is no
	// description.
	Description string `json:"description,omitempty"`

	// BuilderImage describes which image is used for building the result images.
	BuilderImage string `json:"builderImage,omitempty"`

	// BuilderImageVersion provides optional version information about the builder image.
	BuilderImageVersion string `json:"builderImageVersion,omitempty"`

	// BuilderBaseImageVersion provides optional version information about the builder base image.
	BuilderBaseImageVersion string `json:"builderBaseImageVersion,omitempty"`

	// RuntimeImage specifies the image that will be a base for resulting image
	// and will be used for running an application. By default, BuilderImage is
	// used for building and running, but the latter may be overridden.
	RuntimeImage string `json:"runtimeImage,omitempty"`

	//OutputImageName is a result image name without tag, default is latest. tag will append to ImageName in the end
	OutputImageName string `json:"outputImageName,omitempty"`
	// RuntimeImagePullPolicy specifies when to pull a runtime image.
	RuntimeImagePullPolicy PullPolicy `json:"runtimeImagePullPolicy,omitempty"`

	// RuntimeAuthentication holds the authentication information for pulling the
	// runtime Docker images from private repositories.
	RuntimeAuthentication *AuthConfig `json:"runtimeAuthentication,omitempty"`

	// RuntimeArtifacts specifies a list of source/destination pairs that will
	// be copied from builder to a runtime image. Source can be a file or
	// directory. Destination must be a directory. Regardless whether it
	// is an absolute or relative path, it will be placed into image's WORKDIR.
	// Destination also can be empty or equals to ".", in this case it just
	// refers to a root of WORKDIR.
	// In case it's empty, S2I will try to get this list from
	// io.openshift.s2i.assemble-input-files label on a RuntimeImage.
	RuntimeArtifacts []VolumeSpec `json:"runtimeArtifacts,omitempty"`

	// DockerConfig describes how to access host docker daemon.
	DockerConfig *DockerConfig `json:"dockerConfig,omitempty"`

	// PullAuthentication holds the authentication information for pulling the
	// Docker images from private repositories
	PullAuthentication *AuthConfig `json:"pullAuthentication,omitempty"`

	// PullAuthentication holds the authentication information for pulling the
	// Docker images from private repositories
	PushAuthentication *AuthConfig `json:"pushAuthentication,omitempty"`

	// IncrementalAuthentication holds the authentication information for pulling the
	// previous image from private repositories
	IncrementalAuthentication *AuthConfig `json:"incrementalAuthentication,omitempty"`

	// DockerNetworkMode is used to set the docker network setting to --net=container:<id>
	// when the builder is invoked from a container.
	DockerNetworkMode DockerNetworkMode `json:"dockerNetworkMode,omitempty"`

	// PreserveWorkingDir describes if working directory should be left after processing.
	PreserveWorkingDir bool `json:"preserveWorkingDir,omitempty"`

	//ImageName Contains the registry address and reponame, tag should set by field tag alone
	ImageName string `json:"imageName"`
	// Tag is a result image tag name.
	Tag string `json:"tag,omitempty"`

	// BuilderPullPolicy specifies when to pull the builder image
	BuilderPullPolicy PullPolicy `json:"builderPullPolicy,omitempty"`

	// PreviousImagePullPolicy specifies when to pull the previously build image
	// when doing incremental build
	PreviousImagePullPolicy PullPolicy `json:"previousImagePullPolicy,omitempty"`

	// Incremental describes whether to try to perform incremental build.
	Incremental bool `json:"incremental,omitempty"`

	// IncrementalFromTag sets an alternative image tag to look for existing
	// artifacts. Tag is used by default if this is not set.
	IncrementalFromTag string `json:"incrementalFromTag,omitempty"`

	// RemovePreviousImage describes if previous image should be removed after successful build.
	// This applies only to incremental builds.
	RemovePreviousImage bool `json:"removePreviousImage,omitempty"`

	// Environment is a map of environment variables to be passed to the image.
	Environment []EnvironmentSpec `json:"environment,omitempty"`

	// LabelNamespace provides the namespace under which the labels will be generated.
	LabelNamespace string `json:"labelNamespace,omitempty"`

	// CallbackURL is a URL which is called upon successful build to inform about that fact.
	CallbackURL string `json:"callbackUrl,omitempty"`

	// ScriptsURL is a URL describing where to fetch the S2I scripts from during build process.
	// This url can be a reference within the builder image if the scheme is specified as image://
	ScriptsURL string `json:"scriptsUrl,omitempty"`

	// Destination specifies a location where the untar operation will place its artifacts.
	Destination string `json:"destination,omitempty"`

	// WorkingDir describes temporary directory used for downloading sources, scripts and tar operations.
	WorkingDir string `json:"workingDir,omitempty"`

	// WorkingSourceDir describes the subdirectory off of WorkingDir set up during the repo download
	// that is later used as the root for ignore processing
	WorkingSourceDir string `json:"workingSourceDir,omitempty"`

	// LayeredBuild describes if this is build which layered scripts and sources on top of BuilderImage.
	LayeredBuild bool `json:"layeredBuild,omitempty"`

	// Specify a relative directory inside the application repository that should
	// be used as a root directory for the application.
	ContextDir string `json:"contextDir,omitempty"`

	// AssembleUser specifies the user to run the assemble script in container
	AssembleUser string `json:"assembleUser,omitempty"`

	// RunImage will trigger a "docker run ..." invocation of the produced image so the user
	// can see if it operates as he would expect
	RunImage bool `json:"runImage,omitempty"`

	// Usage allows for properly shortcircuiting s2i logic when `s2i usage` is invoked
	Usage bool `json:"usage,omitempty"`

	// Injections specifies a list source/destination folders that are injected to
	// the container that runs assemble.
	// All files we inject will be truncated after the assemble script finishes.
	Injections []VolumeSpec `json:"injections,omitempty"`

	// CGroupLimits describes the cgroups limits that will be applied to any containers
	// run by s2i.
	CGroupLimits *CGroupLimits `json:"cgroupLimits,omitempty"`

	// DropCapabilities contains a list of capabilities to drop when executing containers
	DropCapabilities []string `json:"dropCapabilities,omitempty"`

	// ScriptDownloadProxyConfig optionally specifies the http and https proxy
	// to use when downloading scripts
	ScriptDownloadProxyConfig *ProxyConfig `json:"scriptDownloadProxyConfig,omitempty"`

	// ExcludeRegExp contains a string representation of the regular expression desired for
	// deciding which files to exclude from the tar stream
	ExcludeRegExp string `json:"excludeRegExp,omitempty"`

	// BlockOnBuild prevents s2i from performing a docker build operation
	// if one is necessary to execute ONBUILD commands, or to layer source code into
	// the container for images that don't have a tar binary available, if the
	// image contains ONBUILD commands that would be executed.
	BlockOnBuild bool `json:"blockOnBuild,omitempty"`

	// HasOnBuild will be set to true if the builder image contains ONBUILD instructions
	HasOnBuild bool `json:"hasOnBuild,omitempty"`

	// BuildVolumes specifies a list of volumes to mount to container running the
	// build.
	BuildVolumes []string `json:"buildVolumes,omitempty"`

	// Labels specify labels and their values to be applied to the resulting image. Label keys
	// must have non-zero length. The labels defined here override generated labels in case
	// they have the same name.
	Labels map[string]string `json:"labels,omitempty"`

	// SecurityOpt are passed as options to the docker containers launched by s2i.
	SecurityOpt []string `json:"securityOpt,omitempty"`

	// KeepSymlinks indicates to copy symlinks as symlinks. Default behavior is to follow
	// symlinks and copy files by content.
	KeepSymlinks bool `json:"keepSymlinks,omitempty"`

	// AsDockerfile indicates the path where the Dockerfile should be written instead of building
	// a new image.
	AsDockerfile string `json:"asDockerfile,omitempty"`

	// ImageWorkDir is the default working directory for the builder image.
	ImageWorkDir string `json:"imageWorkDir,omitempty"`

	// ImageScriptsURL is the default location to find the assemble/run scripts for a builder image.
	// This url can be a reference within the builder image if the scheme is specified as image://
	ImageScriptsURL string `json:"imageScriptsUrl,omitempty"`

	// AddHost Add a line to /etc/hosts for test purpose or private use in LAN. Its format is host:IP,muliple hosts can be added  by using multiple --add-host
	AddHost []string `json:"addHost,omitempty"`

	// Export Push the result image to specify image registry in tag
	Export bool `json:"export,omitempty"`

	// SourceURL is  url of the codes such as https://github.com/a/b.git
	SourceURL string `json:"sourceUrl"`

	// IsBinaryURL explain the type of SourceURL.
	// If it is IsBinaryURL, it will download the file directly without using git.
	IsBinaryURL bool `json:"isBinaryURL,omitempty"`

	// GitSecretRef is the BasicAuth Secret of Git Clone
	GitSecretRef *corev1.LocalObjectReference `json:"gitSecretRef,omitempty"`

	// The RevisionId is a branch name or a SHA-1 hash of every important thing about the commit
	RevisionId string `json:"revisionId,omitempty"`

	// The name of taint.
	TaintKey string `json:"taintKey,omitempty"`

	// The key of Node Affinity.
	NodeAffinityKey string `json:"nodeAffinityKey,omitempty"`

	// The values of Node Affinity.
	NodeAffinityValues []string `json:"nodeAffinityValues,omitempty"`

	// Whether output build result to status.
	OutputBuildResult bool `json:"outputBuildResult,omitempty"`

	// Regular expressions, ignoring names that do not match the provided regular expression
	BranchExpression string `json:"branchExpression,omitempty"`

	// SecretCode
	SecretCode string `json:"secretCode,omitempty"`
}

type TriggerSource string

type UserDefineTemplate struct {
	//Name specify a template to use, so many fields in Config can left empty
	Name string `json:"name,omitempty"`
	//Parameters must use with `template`, fill some parameters which template will use
	Parameters []Parameter `json:"parameters,omitempty"`
	//BaseImage specify which version of this template to use
	BuilderImage string `json:"builderImage,omitempty"`
}

type VolumeSpec struct {
	// Source is a reference to the volume source.
	Source string `json:"source,omitempty"`
	// Destination is the path to mount the volume to - absolute or relative.
	Destination string `json:"destination,omitempty"`
	// Keep indicates if the mounted data should be kept in the final image.
	Keep bool `json:"keep,omitempty"`
}