txpool

package
v0.5.3 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Dec 13, 2023 License: GPL-3.0, LGPL-3.0 Imports: 28 Imported by: 0

Documentation

Index

Constants

This section is empty.

Variables

View Source
var (
	// ErrAlreadyKnown is returned if the transactions is already contained
	// within the pool.
	ErrAlreadyKnown = errors.New("already known")

	// ErrInvalidSender is returned if the transaction contains an invalid signature.
	ErrInvalidSender = errors.New("invalid sender")

	// ErrUnderpriced is returned if a transaction's gas price is below the minimum
	// configured for the transaction pool.
	ErrUnderpriced = errors.New("transaction underpriced")

	// ErrTxPoolOverflow is returned if the transaction pool is full and can't accept
	// another remote transaction.
	ErrTxPoolOverflow = errors.New("txpool is full")

	// ErrReplaceUnderpriced is returned if a transaction is attempted to be replaced
	// with a different one without the required price bump.
	ErrReplaceUnderpriced = errors.New("replacement transaction underpriced")

	// ErrGasLimit is returned if a transaction's requested gas limit exceeds the
	// maximum allowance of the current block.
	ErrGasLimit = errors.New("exceeds block gas limit")

	// ErrNegativeValue is a sanity error to ensure no one is able to specify a
	// transaction with a negative value.
	ErrNegativeValue = errors.New("negative value")

	// ErrOversizedData is returned if the input data of a transaction is greater
	// than some meaningful limit a user might use. This is not a consensus error
	// making the transaction invalid, rather a DOS protection.
	ErrOversizedData = errors.New("oversized data")

	// ErrFutureReplacePending is returned if a future transaction replaces a pending
	// transaction. Future transactions should only be able to replace other future transactions.
	ErrFutureReplacePending = errors.New("future transaction tries to replace pending")

	// ErrOverdraft is returned if a transaction would cause the senders balance to go negative
	// thus invalidating a potential large number of transactions.
	ErrOverdraft = errors.New("transaction would cause overdraft")
)
View Source
var DefaultConfig = Config{
	Journal:   "transactions.rlp",
	Rejournal: time.Hour,

	PriceLimit: 1,
	PriceBump:  10,

	AccountSlots: 16,
	GlobalSlots:  4096 + 1024,
	AccountQueue: 64,
	GlobalQueue:  1024,

	Lifetime: 3 * time.Hour,
}

DefaultConfig contains the default configurations for the transaction pool.

Functions

This section is empty.

Types

type Config

type Config struct {
	Locals    []common.Address // Addresses that should be treated by default as local
	NoLocals  bool             // Whether local transaction handling should be disabled
	Journal   string           // Journal of local transactions to survive node restarts
	Rejournal time.Duration    // Time interval to regenerate the local transaction journal

	PriceLimit uint64 // Minimum gas price to enforce for acceptance into the pool
	PriceBump  uint64 // Minimum price bump percentage to replace an already existing transaction (nonce)

	AccountSlots uint64 // Number of executable transaction slots guaranteed per account
	GlobalSlots  uint64 // Maximum number of executable transaction slots for all accounts
	AccountQueue uint64 // Maximum number of non-executable transaction slots permitted per account
	GlobalQueue  uint64 // Maximum number of non-executable transaction slots for all accounts

	Lifetime time.Duration // Maximum amount of time non-executable transaction are queued
}

Config are the configuration parameters of the transaction pool.

type TxPool

type TxPool struct {
	// contains filtered or unexported fields
}

TxPool contains all currently known transactions. Transactions enter the pool when they are received from the network or submitted locally. They exit the pool when they are included in the blockchain.

The pool separates processable transactions (which can be applied to the current state) and future transactions. Transactions move between those two states over time as they are received and processed.

func NewTxPool

func NewTxPool(config Config, chainconfig *params.ChainConfig, chain blockChain) *TxPool

NewTxPool creates a new transaction pool to gather, sort and filter inbound transactions from the network.

func (*TxPool) AddLocal

func (pool *TxPool) AddLocal(tx *types.Transaction) error

AddLocal enqueues a single local transaction into the pool if it is valid. This is a convenience wrapper around AddLocals.

func (*TxPool) AddLocals

func (pool *TxPool) AddLocals(txs []*types.Transaction) []error

AddLocals enqueues a batch of transactions into the pool if they are valid, marking the senders as a local ones, ensuring they go around the local pricing constraints.

This method is used to add transactions from the RPC API and performs synchronous pool reorganization and event propagation.

func (*TxPool) AddRemote deprecated

func (pool *TxPool) AddRemote(tx *types.Transaction) error

AddRemote enqueues a single transaction into the pool if it is valid. This is a convenience wrapper around AddRemotes.

Deprecated: use AddRemotes

func (*TxPool) AddRemotes

func (pool *TxPool) AddRemotes(txs []*types.Transaction) []error

AddRemotes enqueues a batch of transactions into the pool if they are valid. If the senders are not among the locally tracked ones, full pricing constraints will apply.

This method is used to add transactions from the p2p network and does not wait for pool reorganization and internal event propagation.

func (*TxPool) AddRemotesSync

func (pool *TxPool) AddRemotesSync(txs []*types.Transaction) []error

AddRemotesSync is like AddRemotes, but waits for pool reorganization. Tests use this method.

func (*TxPool) Content

func (pool *TxPool) Content() (map[common.Address]types.Transactions, map[common.Address]types.Transactions)

Content retrieves the data content of the transaction pool, returning all the pending as well as queued transactions, grouped by account and sorted by nonce.

func (*TxPool) ContentFrom

func (pool *TxPool) ContentFrom(addr common.Address) (types.Transactions, types.Transactions)

ContentFrom retrieves the data content of the transaction pool, returning the pending as well as queued transactions of this address, grouped by nonce.

func (*TxPool) GasPrice

func (pool *TxPool) GasPrice() *big.Int

GasPrice returns the current gas price enforced by the transaction pool.

func (*TxPool) Get

func (pool *TxPool) Get(hash common.Hash) *types.Transaction

Get returns a transaction if it is contained in the pool and nil otherwise.

func (*TxPool) Has

func (pool *TxPool) Has(hash common.Hash) bool

Has returns an indicator whether txpool has a transaction cached with the given hash.

func (*TxPool) HasLocal

func (pool *TxPool) HasLocal(hash common.Hash) bool

Has returns an indicator whether txpool has a local transaction cached with the given hash.

func (*TxPool) IteratePending

func (pool *TxPool) IteratePending(f func(tx *types.Transaction) bool)

IteratePending iterates over [pool.pending] until [f] returns false. The caller must not modify [tx].

func (*TxPool) Locals

func (pool *TxPool) Locals() []common.Address

Locals retrieves the accounts currently considered local by the pool.

func (*TxPool) Nonce

func (pool *TxPool) Nonce(addr common.Address) uint64

Nonce returns the next nonce of an account, with all transactions executable by the pool already applied on top.

func (*TxPool) Pending

func (pool *TxPool) Pending(enforceTips bool) map[common.Address]types.Transactions

Pending retrieves all currently processable transactions, grouped by origin account and sorted by nonce. The returned transaction set is a copy and can be freely modified by calling code.

The enforceTips parameter can be used to do an extra filtering on the pending transactions and only return those whose **effective** tip is large enough in the next pending execution environment.

func (*TxPool) PendingFrom

func (pool *TxPool) PendingFrom(addrs []common.Address, enforceTips bool) map[common.Address]types.Transactions

PendingFrom returns the same set of transactions that would be returned from Pending restricted to only transactions from [addrs].

func (*TxPool) PendingSize

func (pool *TxPool) PendingSize() int

PendingSize returns the number of pending txs in the tx pool.

func (*TxPool) RemoveTx

func (pool *TxPool) RemoveTx(hash common.Hash)

RemoveTx removes a single transaction from the queue, moving all subsequent transactions back to the future queue.

func (*TxPool) SetGasPrice

func (pool *TxPool) SetGasPrice(price *big.Int)

SetGasPrice updates the minimum price required by the transaction pool for a new transaction, and drops all transactions below this threshold.

func (*TxPool) SetMinFee

func (pool *TxPool) SetMinFee(minFee *big.Int)

func (*TxPool) Stats

func (pool *TxPool) Stats() (int, int)

Stats retrieves the current pool stats, namely the number of pending and the number of queued (non-executable) transactions.

func (*TxPool) Status

func (pool *TxPool) Status(hashes []common.Hash) []TxStatus

Status returns the status (unknown/pending/queued) of a batch of transactions identified by their hashes.

func (*TxPool) Stop

func (pool *TxPool) Stop()

Stop terminates the transaction pool.

func (*TxPool) SubscribeNewHeadEvent

func (pool *TxPool) SubscribeNewHeadEvent(ch chan<- core.NewTxPoolHeadEvent) event.Subscription

SubscribeNewHeadEvent registers a subscription of NewHeadEvent and starts sending event to the given channel.

func (*TxPool) SubscribeNewReorgEvent

func (pool *TxPool) SubscribeNewReorgEvent(ch chan<- core.NewTxPoolReorgEvent) event.Subscription

SubscribeNewReorgEvent registers a subscription of NewReorgEvent and starts sending event to the given channel.

func (*TxPool) SubscribeNewTxsEvent

func (pool *TxPool) SubscribeNewTxsEvent(ch chan<- core.NewTxsEvent) event.Subscription

SubscribeNewTxsEvent registers a subscription of NewTxsEvent and starts sending event to the given channel.

type TxStatus

type TxStatus uint

TxStatus is the current status of a transaction as seen by the pool.

const (
	TxStatusUnknown TxStatus = iota
	TxStatusQueued
	TxStatusPending
)

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL