Documentation ¶
Index ¶
- func Decode(input interface{}, output interface{}) error
- func DecodeHookExec(raw DecodeHookFunc, from reflect.Value, to reflect.Value) (interface{}, error)
- func DecodeMetadata(input interface{}, output interface{}, metadata *Metadata) error
- func Struct2Map(obj interface{}) map[string]interface{}
- func Struct2MapString(obj interface{}) map[string]string
- func WeakDecode(input, output interface{}) error
- func WeakDecodeMetadata(input interface{}, output interface{}, metadata *Metadata) error
- func WeaklyTypedHook(f reflect.Kind, t reflect.Kind, data interface{}) (interface{}, error)
- type DecodeHookFunc
- func ComposeDecodeHookFunc(fs ...DecodeHookFunc) DecodeHookFunc
- func OrComposeDecodeHookFunc(ff ...DecodeHookFunc) DecodeHookFunc
- func RecursiveStructToMapHookFunc() DecodeHookFunc
- func StringToIPHookFunc() DecodeHookFunc
- func StringToIPNetHookFunc() DecodeHookFunc
- func StringToSliceHookFunc(sep string) DecodeHookFunc
- func StringToTimeDurationHookFunc() DecodeHookFunc
- func StringToTimeHookFunc(layout string) DecodeHookFunc
- type DecodeHookFuncKind
- type DecodeHookFuncType
- type DecodeHookFuncValue
- type Decoder
- type DecoderConfig
- type Error
- type Metadata
Constants ¶
This section is empty.
Variables ¶
This section is empty.
Functions ¶
func Decode ¶
func Decode(input interface{}, output interface{}) error
Decode 将一个结构体通过反射转换为另一个结构体, 待转换的结构体必须是指针类型的map或struct
func DecodeHookExec ¶
DecodeHookExec executes the given decode hook. This should be used since it'll naturally degrade to the older backwards compatible DecodeHookFunc that took reflect.Kind instead of reflect.Type.
func DecodeMetadata ¶
DecodeMetadata is the same as Decode, but is shorthand to enable metadata collection. See DecoderConfig for more info.
func Struct2Map ¶
func Struct2Map(obj interface{}) map[string]interface{}
Struct2Map 将结构体转换为map[string]interface{} struct{I int, S string}{I: 1, S: "a"} 将转换为 map[I:1 S:a].
func Struct2MapString ¶
Struct2MapString 将结构体转换为map[string]string. struct{I int, S string}{I: 1, S: "a"} 将转换为 map[I:1 S:a].
func WeakDecode ¶
func WeakDecode(input, output interface{}) error
WeakDecode is the same as Decode but is shorthand to enable WeaklyTypedInput. See DecoderConfig for more info.
func WeakDecodeMetadata ¶
WeakDecodeMetadata is the same as Decode, but is shorthand to enable both WeaklyTypedInput and metadata collection. See DecoderConfig for more info.
Types ¶
type DecodeHookFunc ¶
type DecodeHookFunc interface{}
DecodeHookFunc is the callback function that can be used for data transformations. See "DecodeHook" in the DecoderConfig struct.
The type must be one of DecodeHookFuncType, DecodeHookFuncKind, or DecodeHookFuncValue. Values are a superset of Types (Values can return types), and Types are a superset of Kinds (Types can return Kinds) and are generally a richer thing to use, but Kinds are simpler if you only need those.
The reason DecodeHookFunc is multi-typed is for backwards compatibility: we started with Kinds and then realized Types were the better solution, but have a promise to not break backwards compat so we now support both.
func ComposeDecodeHookFunc ¶
func ComposeDecodeHookFunc(fs ...DecodeHookFunc) DecodeHookFunc
ComposeDecodeHookFunc creates a single DecodeHookFunc that automatically composes multiple DecodeHookFuncs.
The composed funcs are called in order, with the result of the previous transformation.
func OrComposeDecodeHookFunc ¶
func OrComposeDecodeHookFunc(ff ...DecodeHookFunc) DecodeHookFunc
OrComposeDecodeHookFunc executes all input hook functions until one of them returns no error. In that case its value is returned. If all hooks return an error, OrComposeDecodeHookFunc returns an error concatenating all error messages.
func RecursiveStructToMapHookFunc ¶
func RecursiveStructToMapHookFunc() DecodeHookFunc
func StringToIPHookFunc ¶
func StringToIPHookFunc() DecodeHookFunc
StringToIPHookFunc returns a DecodeHookFunc that converts strings to net.IP
func StringToIPNetHookFunc ¶
func StringToIPNetHookFunc() DecodeHookFunc
StringToIPNetHookFunc returns a DecodeHookFunc that converts strings to net.IPNet
func StringToSliceHookFunc ¶
func StringToSliceHookFunc(sep string) DecodeHookFunc
StringToSliceHookFunc returns a DecodeHookFunc that converts string to []string by splitting on the given sep.
func StringToTimeDurationHookFunc ¶
func StringToTimeDurationHookFunc() DecodeHookFunc
StringToTimeDurationHookFunc returns a DecodeHookFunc that converts strings to time.Duration.
func StringToTimeHookFunc ¶
func StringToTimeHookFunc(layout string) DecodeHookFunc
StringToTimeHookFunc returns a DecodeHookFunc that converts strings to time.Time.
type DecodeHookFuncKind ¶
DecodeHookFuncKind is a DecodeHookFunc which knows only the Kinds of the source and target types.
type DecodeHookFuncType ¶
DecodeHookFuncType is a DecodeHookFunc which has complete information about the source and target types.
func TextUnmarshallerHookFunc ¶
func TextUnmarshallerHookFunc() DecodeHookFuncType
TextUnmarshallerHookFunc returns a DecodeHookFunc that applies strings to the UnmarshalText function, when the target type implements the encoding.TextUnmarshaler interface
type DecodeHookFuncValue ¶
DecodeHookFuncValue is a DecodeHookFunc which has complete access to both the source and target values.
type Decoder ¶
type Decoder struct {
// contains filtered or unexported fields
}
A Decoder takes a raw interface value and turns it into structured data, keeping track of rich error information along the way in case anything goes wrong. Unlike the basic top-level Decode method, you can more finely control how the Decoder behaves using the DecoderConfig structure. The top-level Decode method is just a convenience that sets up the most basic Decoder.
func NewDecoder ¶
func NewDecoder(config *DecoderConfig) (*Decoder, error)
NewDecoder returns a new decoder for the given configuration. Once a decoder has been returned, the same configuration must not be used again.
type DecoderConfig ¶
type DecoderConfig struct { // DecodeHook, if set, will be called before any decoding and any // type conversion (if WeaklyTypedInput is on). This lets you modify // the values before they're set down onto the resulting struct. The // DecodeHook is called for every map and value in the input. This means // that if a struct has embedded fields with squash tags the decode hook // is called only once with all of the input data, not once for each // embedded struct. // // If an error is returned, the entire decode will fail with that error. DecodeHook DecodeHookFunc // If ErrorUnused is true, then it is an error for there to exist // keys in the original map that were unused in the decoding process // (extra keys). ErrorUnused bool // If ErrorUnset is true, then it is an error for there to exist // fields in the result that were not set in the decoding process // (extra fields). This only applies to decoding to a struct. This // will affect all nested structs as well. ErrorUnset bool // ZeroFields, if set to true, will zero fields before writing them. // For example, a map will be emptied before decoded values are put in // it. If this is false, a map will be merged. ZeroFields bool // If WeaklyTypedInput is true, the decoder will make the following // "weak" conversions: // // - bools to string (true = "1", false = "0") // - numbers to string (base 10) // - bools to int/uint (true = 1, false = 0) // - strings to int/uint (base implied by prefix) // - int to bool (true if value != 0) // - string to bool (accepts: 1, t, T, TRUE, true, True, 0, f, F, // FALSE, false, False. Anything else is an error) // - empty array = empty map and vice versa // - negative numbers to overflowed uint values (base 10) // - slice of maps to a merged map // - single values are converted to slices if required. Each // element is weakly decoded. For example: "4" can become []int{4} // if the target type is an int slice. // WeaklyTypedInput bool // Squash will squash embedded structs. A squash tag may also be // added to an individual struct field using a tag. For example: // // type Parent struct { // Child `mapstructure:",squash"` // } Squash bool // Metadata is the struct that will contain extra metadata about // the decoding. If this is nil, then no metadata will be tracked. Metadata *Metadata // Result is a pointer to the struct that will contain the decoded // value. Result interface{} // The tag name that mapstructure reads for field names. This // defaults to "mapstructure" TagName string // IgnoreUntaggedFields ignores all struct fields without explicit // TagName, comparable to `mapstructure:"-"` as default behaviour. IgnoreUntaggedFields bool // MatchName is the function used to match the map key to the struct // field name or tag. Defaults to `strings.EqualFold`. This can be used // to implement case-sensitive tag values, support snake casing, etc. MatchName func(mapKey, fieldName string) bool }
DecoderConfig is the configuration that is used to create a new decoder and allows customization of various aspects of decoding.
type Error ¶
type Error struct {
Errors []string
}
Error implements the error interface and can represents multiple errors that occur in the course of a single decode.
func (*Error) WrappedErrors ¶
WrappedErrors implements the errwrap.Wrapper interface to make this return value more useful with the errwrap and go-multierror libraries.
type Metadata ¶
type Metadata struct { // Keys are the keys of the structure which were successfully decoded Keys []string // Unused is a slice of keys that were found in the raw value but // weren't decoded since there was no matching field in the result interface Unused []string // Unset is a slice of field names that were found in the result interface // but weren't set in the decoding process since there was no matching value // in the input Unset []string }
Metadata contains information about decoding a structure that is tedious or difficult to get otherwise.