storagegateway

package
v0.10.1-0...-83bae04 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Oct 30, 2015 License: Apache-2.0 Imports: 7 Imported by: 0

Documentation

Overview

Package storagegateway provides a client for AWS Storage Gateway.

Index

Examples

Constants

View Source
const (
	// @enum ErrorCode
	ErrorCodeActivationKeyExpired = "ActivationKeyExpired"
	// @enum ErrorCode
	ErrorCodeActivationKeyInvalid = "ActivationKeyInvalid"
	// @enum ErrorCode
	ErrorCodeActivationKeyNotFound = "ActivationKeyNotFound"
	// @enum ErrorCode
	ErrorCodeGatewayInternalError = "GatewayInternalError"
	// @enum ErrorCode
	ErrorCodeGatewayNotConnected = "GatewayNotConnected"
	// @enum ErrorCode
	ErrorCodeGatewayNotFound = "GatewayNotFound"
	// @enum ErrorCode
	ErrorCodeGatewayProxyNetworkConnectionBusy = "GatewayProxyNetworkConnectionBusy"
	// @enum ErrorCode
	ErrorCodeAuthenticationFailure = "AuthenticationFailure"
	// @enum ErrorCode
	ErrorCodeBandwidthThrottleScheduleNotFound = "BandwidthThrottleScheduleNotFound"
	// @enum ErrorCode
	ErrorCodeBlocked = "Blocked"
	// @enum ErrorCode
	ErrorCodeCannotExportSnapshot = "CannotExportSnapshot"
	// @enum ErrorCode
	ErrorCodeChapCredentialNotFound = "ChapCredentialNotFound"
	// @enum ErrorCode
	ErrorCodeDiskAlreadyAllocated = "DiskAlreadyAllocated"
	// @enum ErrorCode
	ErrorCodeDiskDoesNotExist = "DiskDoesNotExist"
	// @enum ErrorCode
	ErrorCodeDiskSizeGreaterThanVolumeMaxSize = "DiskSizeGreaterThanVolumeMaxSize"
	// @enum ErrorCode
	ErrorCodeDiskSizeLessThanVolumeSize = "DiskSizeLessThanVolumeSize"
	// @enum ErrorCode
	ErrorCodeDiskSizeNotGigAligned = "DiskSizeNotGigAligned"
	// @enum ErrorCode
	ErrorCodeDuplicateCertificateInfo = "DuplicateCertificateInfo"
	// @enum ErrorCode
	ErrorCodeDuplicateSchedule = "DuplicateSchedule"
	// @enum ErrorCode
	ErrorCodeEndpointNotFound = "EndpointNotFound"
	// @enum ErrorCode
	ErrorCodeIamnotSupported = "IAMNotSupported"
	// @enum ErrorCode
	ErrorCodeInitiatorInvalid = "InitiatorInvalid"
	// @enum ErrorCode
	ErrorCodeInitiatorNotFound = "InitiatorNotFound"
	// @enum ErrorCode
	ErrorCodeInternalError = "InternalError"
	// @enum ErrorCode
	ErrorCodeInvalidGateway = "InvalidGateway"
	// @enum ErrorCode
	ErrorCodeInvalidEndpoint = "InvalidEndpoint"
	// @enum ErrorCode
	ErrorCodeInvalidParameters = "InvalidParameters"
	// @enum ErrorCode
	ErrorCodeInvalidSchedule = "InvalidSchedule"
	// @enum ErrorCode
	ErrorCodeLocalStorageLimitExceeded = "LocalStorageLimitExceeded"
	// @enum ErrorCode
	ErrorCodeLunAlreadyAllocated = "LunAlreadyAllocated "
	// @enum ErrorCode
	ErrorCodeLunInvalid = "LunInvalid"
	// @enum ErrorCode
	ErrorCodeMaximumContentLengthExceeded = "MaximumContentLengthExceeded"
	// @enum ErrorCode
	ErrorCodeMaximumTapeCartridgeCountExceeded = "MaximumTapeCartridgeCountExceeded"
	// @enum ErrorCode
	ErrorCodeMaximumVolumeCountExceeded = "MaximumVolumeCountExceeded"
	// @enum ErrorCode
	ErrorCodeNetworkConfigurationChanged = "NetworkConfigurationChanged"
	// @enum ErrorCode
	ErrorCodeNoDisksAvailable = "NoDisksAvailable"
	// @enum ErrorCode
	ErrorCodeNotImplemented = "NotImplemented"
	// @enum ErrorCode
	ErrorCodeNotSupported = "NotSupported"
	// @enum ErrorCode
	ErrorCodeOperationAborted = "OperationAborted"
	// @enum ErrorCode
	ErrorCodeOutdatedGateway = "OutdatedGateway"
	// @enum ErrorCode
	ErrorCodeParametersNotImplemented = "ParametersNotImplemented"
	// @enum ErrorCode
	ErrorCodeRegionInvalid = "RegionInvalid"
	// @enum ErrorCode
	ErrorCodeRequestTimeout = "RequestTimeout"
	// @enum ErrorCode
	ErrorCodeServiceUnavailable = "ServiceUnavailable"
	// @enum ErrorCode
	ErrorCodeSnapshotDeleted = "SnapshotDeleted"
	// @enum ErrorCode
	ErrorCodeSnapshotIdInvalid = "SnapshotIdInvalid"
	// @enum ErrorCode
	ErrorCodeSnapshotInProgress = "SnapshotInProgress"
	// @enum ErrorCode
	ErrorCodeSnapshotNotFound = "SnapshotNotFound"
	// @enum ErrorCode
	ErrorCodeSnapshotScheduleNotFound = "SnapshotScheduleNotFound"
	// @enum ErrorCode
	ErrorCodeStagingAreaFull = "StagingAreaFull"
	// @enum ErrorCode
	ErrorCodeStorageFailure = "StorageFailure"
	// @enum ErrorCode
	ErrorCodeTapeCartridgeNotFound = "TapeCartridgeNotFound"
	// @enum ErrorCode
	ErrorCodeTargetAlreadyExists = "TargetAlreadyExists"
	// @enum ErrorCode
	ErrorCodeTargetInvalid = "TargetInvalid"
	// @enum ErrorCode
	ErrorCodeTargetNotFound = "TargetNotFound"
	// @enum ErrorCode
	ErrorCodeUnauthorizedOperation = "UnauthorizedOperation"
	// @enum ErrorCode
	ErrorCodeVolumeAlreadyExists = "VolumeAlreadyExists"
	// @enum ErrorCode
	ErrorCodeVolumeIdInvalid = "VolumeIdInvalid"
	// @enum ErrorCode
	ErrorCodeVolumeInUse = "VolumeInUse"
	// @enum ErrorCode
	ErrorCodeVolumeNotFound = "VolumeNotFound"
	// @enum ErrorCode
	ErrorCodeVolumeNotReady = "VolumeNotReady"
)
View Source
const ServiceName = "storagegateway"

A ServiceName is the name of the service the client will make API calls to.

Variables

This section is empty.

Functions

This section is empty.

Types

type ActivateGatewayInput

type ActivateGatewayInput struct {
	// Your gateway activation key. You can obtain the activation key by sending
	// an HTTP GET request with redirects enabled to the gateway IP address (port
	// 80). The redirect URL returned in the response provides you the activation
	// key for your gateway in the query string parameter activationKey. It may
	// also include other activation-related parameters, however, these are merely
	// defaults -- the arguments you pass to the ActivateGateway API call determine
	// the actual configuration of your gateway.
	ActivationKey *string `min:"1" type:"string" required:"true"`

	// A unique identifier for your gateway. This name becomes part of the gateway
	// Amazon Resources Name (ARN) which is what you use as an input to other operations.
	GatewayName *string `min:"2" type:"string" required:"true"`

	// One of the values that indicates the region where you want to store the snapshot
	// backups. The gateway region specified must be the same region as the region
	// in your Host header in the request. For more information about available
	// regions and endpoints for AWS Storage Gateway, see Regions and Endpoints
	// (http://docs.aws.amazon.com/general/latest/gr/rande.html#sg_region) in the
	// Amazon Web Services Glossary.
	//
	// Valid Values: "us-east-1", "us-west-1", "us-west-2", "eu-west-1", "eu-central-1",
	// "ap-northeast-1", "ap-southeast-1", "ap-southeast-2", "sa-east-1"
	GatewayRegion *string `min:"1" type:"string" required:"true"`

	// One of the values that indicates the time zone you want to set for the gateway.
	// The time zone is used, for example, for scheduling snapshots and your gateway's
	// maintenance schedule.
	GatewayTimezone *string `min:"3" type:"string" required:"true"`

	// One of the values that defines the type of gateway to activate. The type
	// specified is critical to all later functions of the gateway and cannot be
	// changed after activation. The default value is STORED.
	GatewayType *string `min:"2" type:"string"`

	// The value that indicates the type of medium changer to use for gateway-VTL.
	// This field is optional.
	//
	// Valid Values: "STK-L700", "AWS-Gateway-VTL"
	MediumChangerType *string `min:"2" type:"string"`

	// The value that indicates the type of tape drive to use for gateway-VTL. This
	// field is optional.
	//
	// Valid Values: "IBM-ULT3580-TD5"
	TapeDriveType *string `min:"2" type:"string"`
	// contains filtered or unexported fields
}

A JSON object containing one or more of the following fields:

ActivateGatewayInput$ActivationKey   GatewayName   ActivateGatewayInput$GatewayRegion
ActivateGatewayInput$GatewayTimezone   ActivateGatewayInput$GatewayType
ActivateGatewayInput$TapeDriveType   ActivateGatewayInput$MediumChangerType

func (ActivateGatewayInput) GoString

func (s ActivateGatewayInput) GoString() string

GoString returns the string representation

func (ActivateGatewayInput) String

func (s ActivateGatewayInput) String() string

String returns the string representation

type ActivateGatewayOutput

type ActivateGatewayOutput struct {
	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string"`
	// contains filtered or unexported fields
}

AWS Storage Gateway returns the Amazon Resource Name (ARN) of the activated gateway. It is a string made of information such as your account, gateway name, and region. This ARN is used to reference the gateway in other API operations as well as resource-based authorization.

func (ActivateGatewayOutput) GoString

func (s ActivateGatewayOutput) GoString() string

GoString returns the string representation

func (ActivateGatewayOutput) String

func (s ActivateGatewayOutput) String() string

String returns the string representation

type AddCacheInput

type AddCacheInput struct {
	DiskIds []*string `type:"list" required:"true"`

	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string" required:"true"`
	// contains filtered or unexported fields
}

func (AddCacheInput) GoString

func (s AddCacheInput) GoString() string

GoString returns the string representation

func (AddCacheInput) String

func (s AddCacheInput) String() string

String returns the string representation

type AddCacheOutput

type AddCacheOutput struct {
	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string"`
	// contains filtered or unexported fields
}

func (AddCacheOutput) GoString

func (s AddCacheOutput) GoString() string

GoString returns the string representation

func (AddCacheOutput) String

func (s AddCacheOutput) String() string

String returns the string representation

type AddTagsToResourceInput

type AddTagsToResourceInput struct {
	// The Amazon Resource Name (ARN) of the resource you want to add tags to.
	ResourceARN *string `min:"50" type:"string" required:"true"`

	// The key-value pair that represents the tag you want to add to the resource.
	// The value can be an empty string.
	//
	// Valid characters for key and value are letters, spaces, and numbers representable
	// in UTF-8 format, and the following special characters: + - = . _ : / @.
	Tags []*Tag `type:"list" required:"true"`
	// contains filtered or unexported fields
}

AddTagsToResourceInput

func (AddTagsToResourceInput) GoString

func (s AddTagsToResourceInput) GoString() string

GoString returns the string representation

func (AddTagsToResourceInput) String

func (s AddTagsToResourceInput) String() string

String returns the string representation

type AddTagsToResourceOutput

type AddTagsToResourceOutput struct {
	// The Amazon Resource Name (ARN) of the resource you want to add tags to.
	ResourceARN *string `min:"50" type:"string"`
	// contains filtered or unexported fields
}

AddTagsToResourceOutput

func (AddTagsToResourceOutput) GoString

func (s AddTagsToResourceOutput) GoString() string

GoString returns the string representation

func (AddTagsToResourceOutput) String

func (s AddTagsToResourceOutput) String() string

String returns the string representation

type AddUploadBufferInput

type AddUploadBufferInput struct {
	DiskIds []*string `type:"list" required:"true"`

	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string" required:"true"`
	// contains filtered or unexported fields
}

func (AddUploadBufferInput) GoString

func (s AddUploadBufferInput) GoString() string

GoString returns the string representation

func (AddUploadBufferInput) String

func (s AddUploadBufferInput) String() string

String returns the string representation

type AddUploadBufferOutput

type AddUploadBufferOutput struct {
	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string"`
	// contains filtered or unexported fields
}

func (AddUploadBufferOutput) GoString

func (s AddUploadBufferOutput) GoString() string

GoString returns the string representation

func (AddUploadBufferOutput) String

func (s AddUploadBufferOutput) String() string

String returns the string representation

type AddWorkingStorageInput

type AddWorkingStorageInput struct {
	// An array of strings that identify disks that are to be configured as working
	// storage. Each string have a minimum length of 1 and maximum length of 300.
	// You can get the disk IDs from the ListLocalDisks API.
	DiskIds []*string `type:"list" required:"true"`

	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A JSON object containing one or more of the following fields:

AddWorkingStorageInput$DiskIds

func (AddWorkingStorageInput) GoString

func (s AddWorkingStorageInput) GoString() string

GoString returns the string representation

func (AddWorkingStorageInput) String

func (s AddWorkingStorageInput) String() string

String returns the string representation

type AddWorkingStorageOutput

type AddWorkingStorageOutput struct {
	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string"`
	// contains filtered or unexported fields
}

A JSON object containing the of the gateway for which working storage was configured.

func (AddWorkingStorageOutput) GoString

func (s AddWorkingStorageOutput) GoString() string

GoString returns the string representation

func (AddWorkingStorageOutput) String

func (s AddWorkingStorageOutput) String() string

String returns the string representation

type CachediSCSIVolume

type CachediSCSIVolume struct {
	SourceSnapshotId *string `type:"string"`

	VolumeARN *string `min:"50" type:"string"`

	VolumeId *string `min:"12" type:"string"`

	VolumeProgress *float64 `type:"double"`

	VolumeSizeInBytes *int64 `type:"long"`

	VolumeStatus *string `min:"3" type:"string"`

	VolumeType *string `min:"3" type:"string"`

	// Lists iSCSI information about a volume.
	VolumeiSCSIAttributes *VolumeiSCSIAttributes `type:"structure"`
	// contains filtered or unexported fields
}

func (CachediSCSIVolume) GoString

func (s CachediSCSIVolume) GoString() string

GoString returns the string representation

func (CachediSCSIVolume) String

func (s CachediSCSIVolume) String() string

String returns the string representation

type CancelArchivalInput

type CancelArchivalInput struct {
	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string" required:"true"`

	// The Amazon Resource Name (ARN) of the virtual tape you want to cancel archiving
	// for.
	TapeARN *string `min:"50" type:"string" required:"true"`
	// contains filtered or unexported fields
}

CancelArchivalInput

func (CancelArchivalInput) GoString

func (s CancelArchivalInput) GoString() string

GoString returns the string representation

func (CancelArchivalInput) String

func (s CancelArchivalInput) String() string

String returns the string representation

type CancelArchivalOutput

type CancelArchivalOutput struct {
	// The Amazon Resource Name (ARN) of the virtual tape for which archiving was
	// canceled.
	TapeARN *string `min:"50" type:"string"`
	// contains filtered or unexported fields
}

CancelArchivalOutput

func (CancelArchivalOutput) GoString

func (s CancelArchivalOutput) GoString() string

GoString returns the string representation

func (CancelArchivalOutput) String

func (s CancelArchivalOutput) String() string

String returns the string representation

type CancelRetrievalInput

type CancelRetrievalInput struct {
	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string" required:"true"`

	// The Amazon Resource Name (ARN) of the virtual tape you want to cancel retrieval
	// for.
	TapeARN *string `min:"50" type:"string" required:"true"`
	// contains filtered or unexported fields
}

CancelRetrievalInput

func (CancelRetrievalInput) GoString

func (s CancelRetrievalInput) GoString() string

GoString returns the string representation

func (CancelRetrievalInput) String

func (s CancelRetrievalInput) String() string

String returns the string representation

type CancelRetrievalOutput

type CancelRetrievalOutput struct {
	// The Amazon Resource Name (ARN) of the virtual tape for which retrieval was
	// canceled.
	TapeARN *string `min:"50" type:"string"`
	// contains filtered or unexported fields
}

CancelRetrievalOutput

func (CancelRetrievalOutput) GoString

func (s CancelRetrievalOutput) GoString() string

GoString returns the string representation

func (CancelRetrievalOutput) String

func (s CancelRetrievalOutput) String() string

String returns the string representation

type ChapInfo

type ChapInfo struct {
	// The iSCSI initiator that connects to the target.
	InitiatorName *string `min:"1" type:"string"`

	// The secret key that the initiator (for example, the Windows client) must
	// provide to participate in mutual CHAP with the target.
	SecretToAuthenticateInitiator *string `min:"1" type:"string"`

	// The secret key that the target must provide to participate in mutual CHAP
	// with the initiator (e.g. Windows client).
	SecretToAuthenticateTarget *string `min:"1" type:"string"`

	// The Amazon Resource Name (ARN) of the volume.
	//
	// Valid Values: 50 to 500 lowercase letters, numbers, periods (.), and hyphens
	// (-).
	TargetARN *string `min:"50" type:"string"`
	// contains filtered or unexported fields
}

Describes Challenge-Handshake Authentication Protocol (CHAP) information that supports authentication between your gateway and iSCSI initiators.

func (ChapInfo) GoString

func (s ChapInfo) GoString() string

GoString returns the string representation

func (ChapInfo) String

func (s ChapInfo) String() string

String returns the string representation

type CreateCachediSCSIVolumeInput

type CreateCachediSCSIVolumeInput struct {
	ClientToken *string `min:"5" type:"string" required:"true"`

	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string" required:"true"`

	NetworkInterfaceId *string `type:"string" required:"true"`

	SnapshotId *string `type:"string"`

	TargetName *string `min:"1" type:"string" required:"true"`

	VolumeSizeInBytes *int64 `type:"long" required:"true"`
	// contains filtered or unexported fields
}

func (CreateCachediSCSIVolumeInput) GoString

func (s CreateCachediSCSIVolumeInput) GoString() string

GoString returns the string representation

func (CreateCachediSCSIVolumeInput) String

String returns the string representation

type CreateCachediSCSIVolumeOutput

type CreateCachediSCSIVolumeOutput struct {
	TargetARN *string `min:"50" type:"string"`

	VolumeARN *string `min:"50" type:"string"`
	// contains filtered or unexported fields
}

func (CreateCachediSCSIVolumeOutput) GoString

GoString returns the string representation

func (CreateCachediSCSIVolumeOutput) String

String returns the string representation

type CreateSnapshotFromVolumeRecoveryPointInput

type CreateSnapshotFromVolumeRecoveryPointInput struct {
	SnapshotDescription *string `min:"1" type:"string" required:"true"`

	VolumeARN *string `min:"50" type:"string" required:"true"`
	// contains filtered or unexported fields
}

func (CreateSnapshotFromVolumeRecoveryPointInput) GoString

GoString returns the string representation

func (CreateSnapshotFromVolumeRecoveryPointInput) String

String returns the string representation

type CreateSnapshotFromVolumeRecoveryPointOutput

type CreateSnapshotFromVolumeRecoveryPointOutput struct {
	SnapshotId *string `type:"string"`

	VolumeARN *string `min:"50" type:"string"`

	VolumeRecoveryPointTime *string `type:"string"`
	// contains filtered or unexported fields
}

func (CreateSnapshotFromVolumeRecoveryPointOutput) GoString

GoString returns the string representation

func (CreateSnapshotFromVolumeRecoveryPointOutput) String

String returns the string representation

type CreateSnapshotInput

type CreateSnapshotInput struct {
	// Textual description of the snapshot that appears in the Amazon EC2 console,
	// Elastic Block Store snapshots panel in the Description field, and in the
	// AWS Storage Gateway snapshot Details pane, Description field
	SnapshotDescription *string `min:"1" type:"string" required:"true"`

	// The Amazon Resource Name (ARN) of the volume. Use the ListVolumes operation
	// to return a list of gateway volumes.
	VolumeARN *string `min:"50" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A JSON object containing one or more of the following fields:

CreateSnapshotInput$SnapshotDescription   CreateSnapshotInput$VolumeARN

func (CreateSnapshotInput) GoString

func (s CreateSnapshotInput) GoString() string

GoString returns the string representation

func (CreateSnapshotInput) String

func (s CreateSnapshotInput) String() string

String returns the string representation

type CreateSnapshotOutput

type CreateSnapshotOutput struct {
	// The snapshot ID that is used to refer to the snapshot in future operations
	// such as describing snapshots (Amazon Elastic Compute Cloud API DescribeSnapshots)
	// or creating a volume from a snapshot (CreateStorediSCSIVolume).
	SnapshotId *string `type:"string"`

	// The Amazon Resource Name (ARN) of the volume of which the snapshot was taken.
	VolumeARN *string `min:"50" type:"string"`
	// contains filtered or unexported fields
}

A JSON object containing the following fields:

func (CreateSnapshotOutput) GoString

func (s CreateSnapshotOutput) GoString() string

GoString returns the string representation

func (CreateSnapshotOutput) String

func (s CreateSnapshotOutput) String() string

String returns the string representation

type CreateStorediSCSIVolumeInput

type CreateStorediSCSIVolumeInput struct {
	// The unique identifier for the gateway local disk that is configured as a
	// stored volume. Use ListLocalDisks (http://docs.aws.amazon.com/storagegateway/latest/userguide/API_ListLocalDisks.html)
	// to list disk IDs for a gateway.
	DiskId *string `min:"1" type:"string" required:"true"`

	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string" required:"true"`

	// The network interface of the gateway on which to expose the iSCSI target.
	// Only IPv4 addresses are accepted. Use DescribeGatewayInformation to get a
	// list of the network interfaces available on a gateway.
	//
	// Valid Values: A valid IP address.
	NetworkInterfaceId *string `type:"string" required:"true"`

	// Specify this field as true if you want to preserve the data on the local
	// disk. Otherwise, specifying this field as false creates an empty volume.
	//
	// Valid Values: true, false
	PreserveExistingData *bool `type:"boolean" required:"true"`

	// The snapshot ID (e.g. "snap-1122aabb") of the snapshot to restore as the
	// new stored volume. Specify this field if you want to create the iSCSI storage
	// volume from a snapshot otherwise do not include this field. To list snapshots
	// for your account use DescribeSnapshots (http://docs.aws.amazon.com/AWSEC2/latest/APIReference/ApiReference-query-DescribeSnapshots.html)
	// in the Amazon Elastic Compute Cloud API Reference.
	SnapshotId *string `type:"string"`

	// The name of the iSCSI target used by initiators to connect to the target
	// and as a suffix for the target ARN. For example, specifying TargetName as
	// myvolume results in the target ARN of arn:aws:storagegateway:us-east-1:111122223333:gateway/mygateway/target/iqn.1997-05.com.amazon:myvolume.
	// The target name must be unique across all volumes of a gateway.
	TargetName *string `min:"1" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A JSON object containing one or more of the following fields:

CreateStorediSCSIVolumeInput$DiskId   CreateStorediSCSIVolumeInput$NetworkInterfaceId
CreateStorediSCSIVolumeInput$PreserveExistingData   CreateStorediSCSIVolumeInput$SnapshotId
CreateStorediSCSIVolumeInput$TargetName

func (CreateStorediSCSIVolumeInput) GoString

func (s CreateStorediSCSIVolumeInput) GoString() string

GoString returns the string representation

func (CreateStorediSCSIVolumeInput) String

String returns the string representation

type CreateStorediSCSIVolumeOutput

type CreateStorediSCSIVolumeOutput struct {
	// he Amazon Resource Name (ARN) of the volume target that includes the iSCSI
	// name that initiators can use to connect to the target.
	TargetARN *string `min:"50" type:"string"`

	// The Amazon Resource Name (ARN) of the configured volume.
	VolumeARN *string `min:"50" type:"string"`

	// The size of the volume in bytes.
	VolumeSizeInBytes *int64 `type:"long"`
	// contains filtered or unexported fields
}

A JSON object containing the following fields:

func (CreateStorediSCSIVolumeOutput) GoString

GoString returns the string representation

func (CreateStorediSCSIVolumeOutput) String

String returns the string representation

type CreateTapesInput

type CreateTapesInput struct {
	// A unique identifier that you use to retry a request. If you retry a request,
	// use the same ClientToken you specified in the initial request.
	//
	// Using the same ClientToken prevents creating the tape multiple times.
	ClientToken *string `min:"5" type:"string" required:"true"`

	// The unique Amazon Resource Name(ARN) that represents the gateway to associate
	// the virtual tapes with. Use the ListGateways operation to return a list of
	// gateways for your account and region.
	GatewayARN *string `min:"50" type:"string" required:"true"`

	// The number of virtual tapes you want to create.
	NumTapesToCreate *int64 `min:"1" type:"integer" required:"true"`

	// A prefix you append to the barcode of the virtual tape you are creating.
	// This makes a barcode unique.
	//
	// The prefix must be 1 to 4 characters in length and must be upper-case letters
	// A-Z.
	TapeBarcodePrefix *string `min:"1" type:"string" required:"true"`

	// The size, in bytes, of the virtual tapes you want to create.
	//
	// The size must be gigabyte (1024*1024*1024 byte) aligned.
	TapeSizeInBytes *int64 `type:"long" required:"true"`
	// contains filtered or unexported fields
}

CreateTapesInput

func (CreateTapesInput) GoString

func (s CreateTapesInput) GoString() string

GoString returns the string representation

func (CreateTapesInput) String

func (s CreateTapesInput) String() string

String returns the string representation

type CreateTapesOutput

type CreateTapesOutput struct {
	// A list of unique Amazon Resource Named (ARN) that represents the virtual
	// tapes that were created.
	TapeARNs []*string `type:"list"`
	// contains filtered or unexported fields
}

CreateTapeOutput

func (CreateTapesOutput) GoString

func (s CreateTapesOutput) GoString() string

GoString returns the string representation

func (CreateTapesOutput) String

func (s CreateTapesOutput) String() string

String returns the string representation

type DeleteBandwidthRateLimitInput

type DeleteBandwidthRateLimitInput struct {
	BandwidthType *string `min:"3" type:"string" required:"true"`

	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string" required:"true"`
	// contains filtered or unexported fields
}

func (DeleteBandwidthRateLimitInput) GoString

GoString returns the string representation

func (DeleteBandwidthRateLimitInput) String

String returns the string representation

type DeleteBandwidthRateLimitOutput

type DeleteBandwidthRateLimitOutput struct {
	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string"`
	// contains filtered or unexported fields
}

A JSON object containing the of the gateway whose bandwidth rate information was deleted.

func (DeleteBandwidthRateLimitOutput) GoString

GoString returns the string representation

func (DeleteBandwidthRateLimitOutput) String

String returns the string representation

type DeleteChapCredentialsInput

type DeleteChapCredentialsInput struct {
	// The iSCSI initiator that connects to the target.
	InitiatorName *string `min:"1" type:"string" required:"true"`

	// The Amazon Resource Name (ARN) of the iSCSI volume target. Use the DescribeStorediSCSIVolumes
	// operation to return to retrieve the TargetARN for specified VolumeARN.
	TargetARN *string `min:"50" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A JSON object containing one or more of the following fields:

DeleteChapCredentialsInput$InitiatorName   DeleteChapCredentialsInput$TargetARN

func (DeleteChapCredentialsInput) GoString

func (s DeleteChapCredentialsInput) GoString() string

GoString returns the string representation

func (DeleteChapCredentialsInput) String

String returns the string representation

type DeleteChapCredentialsOutput

type DeleteChapCredentialsOutput struct {
	// The iSCSI initiator that connects to the target.
	InitiatorName *string `min:"1" type:"string"`

	// The Amazon Resource Name (ARN) of the target.
	TargetARN *string `min:"50" type:"string"`
	// contains filtered or unexported fields
}

A JSON object containing the following fields:

func (DeleteChapCredentialsOutput) GoString

func (s DeleteChapCredentialsOutput) GoString() string

GoString returns the string representation

func (DeleteChapCredentialsOutput) String

String returns the string representation

type DeleteGatewayInput

type DeleteGatewayInput struct {
	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A JSON object containing the id of the gateway to delete.

func (DeleteGatewayInput) GoString

func (s DeleteGatewayInput) GoString() string

GoString returns the string representation

func (DeleteGatewayInput) String

func (s DeleteGatewayInput) String() string

String returns the string representation

type DeleteGatewayOutput

type DeleteGatewayOutput struct {
	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string"`
	// contains filtered or unexported fields
}

A JSON object containing the id of the deleted gateway.

func (DeleteGatewayOutput) GoString

func (s DeleteGatewayOutput) GoString() string

GoString returns the string representation

func (DeleteGatewayOutput) String

func (s DeleteGatewayOutput) String() string

String returns the string representation

type DeleteSnapshotScheduleInput

type DeleteSnapshotScheduleInput struct {
	VolumeARN *string `min:"50" type:"string" required:"true"`
	// contains filtered or unexported fields
}

func (DeleteSnapshotScheduleInput) GoString

func (s DeleteSnapshotScheduleInput) GoString() string

GoString returns the string representation

func (DeleteSnapshotScheduleInput) String

String returns the string representation

type DeleteSnapshotScheduleOutput

type DeleteSnapshotScheduleOutput struct {
	VolumeARN *string `min:"50" type:"string"`
	// contains filtered or unexported fields
}

func (DeleteSnapshotScheduleOutput) GoString

func (s DeleteSnapshotScheduleOutput) GoString() string

GoString returns the string representation

func (DeleteSnapshotScheduleOutput) String

String returns the string representation

type DeleteTapeArchiveInput

type DeleteTapeArchiveInput struct {
	// The Amazon Resource Name (ARN) of the virtual tape to delete from the virtual
	// tape shelf (VTS).
	TapeARN *string `min:"50" type:"string" required:"true"`
	// contains filtered or unexported fields
}

DeleteTapeArchiveInput

func (DeleteTapeArchiveInput) GoString

func (s DeleteTapeArchiveInput) GoString() string

GoString returns the string representation

func (DeleteTapeArchiveInput) String

func (s DeleteTapeArchiveInput) String() string

String returns the string representation

type DeleteTapeArchiveOutput

type DeleteTapeArchiveOutput struct {
	// The Amazon Resource Name (ARN) of the virtual tape that was deleted from
	// the virtual tape shelf (VTS).
	TapeARN *string `min:"50" type:"string"`
	// contains filtered or unexported fields
}

DeleteTapeArchiveOutput

func (DeleteTapeArchiveOutput) GoString

func (s DeleteTapeArchiveOutput) GoString() string

GoString returns the string representation

func (DeleteTapeArchiveOutput) String

func (s DeleteTapeArchiveOutput) String() string

String returns the string representation

type DeleteTapeInput

type DeleteTapeInput struct {
	// The unique Amazon Resource Name (ARN) of the gateway that the virtual tape
	// to delete is associated with. Use the ListGateways operation to return a
	// list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string" required:"true"`

	// The Amazon Resource Name (ARN) of the virtual tape to delete.
	TapeARN *string `min:"50" type:"string" required:"true"`
	// contains filtered or unexported fields
}

DeleteTapeInput

func (DeleteTapeInput) GoString

func (s DeleteTapeInput) GoString() string

GoString returns the string representation

func (DeleteTapeInput) String

func (s DeleteTapeInput) String() string

String returns the string representation

type DeleteTapeOutput

type DeleteTapeOutput struct {
	// The Amazon Resource Name (ARN) of the deleted virtual tape.
	TapeARN *string `min:"50" type:"string"`
	// contains filtered or unexported fields
}

DeleteTapeOutput

func (DeleteTapeOutput) GoString

func (s DeleteTapeOutput) GoString() string

GoString returns the string representation

func (DeleteTapeOutput) String

func (s DeleteTapeOutput) String() string

String returns the string representation

type DeleteVolumeInput

type DeleteVolumeInput struct {
	// The Amazon Resource Name (ARN) of the volume. Use the ListVolumes operation
	// to return a list of gateway volumes.
	VolumeARN *string `min:"50" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A JSON object containing the DeleteVolumeInput$VolumeARN to delete.

func (DeleteVolumeInput) GoString

func (s DeleteVolumeInput) GoString() string

GoString returns the string representation

func (DeleteVolumeInput) String

func (s DeleteVolumeInput) String() string

String returns the string representation

type DeleteVolumeOutput

type DeleteVolumeOutput struct {
	// The Amazon Resource Name (ARN) of the storage volume that was deleted. It
	// is the same ARN you provided in the request.
	VolumeARN *string `min:"50" type:"string"`
	// contains filtered or unexported fields
}

A JSON object containing the of the storage volume that was deleted

func (DeleteVolumeOutput) GoString

func (s DeleteVolumeOutput) GoString() string

GoString returns the string representation

func (DeleteVolumeOutput) String

func (s DeleteVolumeOutput) String() string

String returns the string representation

type DescribeBandwidthRateLimitInput

type DescribeBandwidthRateLimitInput struct {
	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A JSON object containing the of the gateway.

func (DescribeBandwidthRateLimitInput) GoString

GoString returns the string representation

func (DescribeBandwidthRateLimitInput) String

String returns the string representation

type DescribeBandwidthRateLimitOutput

type DescribeBandwidthRateLimitOutput struct {
	// The average download bandwidth rate limit in bits per second. This field
	// does not appear in the response if the download rate limit is not set.
	AverageDownloadRateLimitInBitsPerSec *int64 `min:"102400" type:"long"`

	// The average upload bandwidth rate limit in bits per second. This field does
	// not appear in the response if the upload rate limit is not set.
	AverageUploadRateLimitInBitsPerSec *int64 `min:"51200" type:"long"`

	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string"`
	// contains filtered or unexported fields
}

A JSON object containing the following fields:

func (DescribeBandwidthRateLimitOutput) GoString

GoString returns the string representation

func (DescribeBandwidthRateLimitOutput) String

String returns the string representation

type DescribeCacheInput

type DescribeCacheInput struct {
	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string" required:"true"`
	// contains filtered or unexported fields
}

func (DescribeCacheInput) GoString

func (s DescribeCacheInput) GoString() string

GoString returns the string representation

func (DescribeCacheInput) String

func (s DescribeCacheInput) String() string

String returns the string representation

type DescribeCacheOutput

type DescribeCacheOutput struct {
	CacheAllocatedInBytes *int64 `type:"long"`

	CacheDirtyPercentage *float64 `type:"double"`

	CacheHitPercentage *float64 `type:"double"`

	CacheMissPercentage *float64 `type:"double"`

	CacheUsedPercentage *float64 `type:"double"`

	DiskIds []*string `type:"list"`

	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string"`
	// contains filtered or unexported fields
}

func (DescribeCacheOutput) GoString

func (s DescribeCacheOutput) GoString() string

GoString returns the string representation

func (DescribeCacheOutput) String

func (s DescribeCacheOutput) String() string

String returns the string representation

type DescribeCachediSCSIVolumesInput

type DescribeCachediSCSIVolumesInput struct {
	VolumeARNs []*string `type:"list" required:"true"`
	// contains filtered or unexported fields
}

func (DescribeCachediSCSIVolumesInput) GoString

GoString returns the string representation

func (DescribeCachediSCSIVolumesInput) String

String returns the string representation

type DescribeCachediSCSIVolumesOutput

type DescribeCachediSCSIVolumesOutput struct {
	// An array of objects where each object contains metadata about one cached
	// volume.
	CachediSCSIVolumes []*CachediSCSIVolume `type:"list"`
	// contains filtered or unexported fields
}

A JSON object containing the following fields:

func (DescribeCachediSCSIVolumesOutput) GoString

GoString returns the string representation

func (DescribeCachediSCSIVolumesOutput) String

String returns the string representation

type DescribeChapCredentialsInput

type DescribeChapCredentialsInput struct {
	// The Amazon Resource Name (ARN) of the iSCSI volume target. Use the DescribeStorediSCSIVolumes
	// operation to return to retrieve the TargetARN for specified VolumeARN.
	TargetARN *string `min:"50" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A JSON object containing the Amazon Resource Name (ARN) of the iSCSI volume target.

func (DescribeChapCredentialsInput) GoString

func (s DescribeChapCredentialsInput) GoString() string

GoString returns the string representation

func (DescribeChapCredentialsInput) String

String returns the string representation

type DescribeChapCredentialsOutput

type DescribeChapCredentialsOutput struct {
	// An array of ChapInfo objects that represent CHAP credentials. Each object
	// in the array contains CHAP credential information for one target-initiator
	// pair. If no CHAP credentials are set, an empty array is returned. CHAP credential
	// information is provided in a JSON object with the following fields:
	//
	//   InitiatorName: The iSCSI initiator that connects to the target.
	//
	//   SecretToAuthenticateInitiator: The secret key that the initiator (for
	// example, the Windows client) must provide to participate in mutual CHAP with
	// the target.
	//
	//   SecretToAuthenticateTarget: The secret key that the target must provide
	// to participate in mutual CHAP with the initiator (e.g. Windows client).
	//
	//   TargetARN: The Amazon Resource Name (ARN) of the storage volume.
	ChapCredentials []*ChapInfo `type:"list"`
	// contains filtered or unexported fields
}

A JSON object containing a .

func (DescribeChapCredentialsOutput) GoString

GoString returns the string representation

func (DescribeChapCredentialsOutput) String

String returns the string representation

type DescribeGatewayInformationInput

type DescribeGatewayInformationInput struct {
	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A JSON object containing the id of the gateway.

func (DescribeGatewayInformationInput) GoString

GoString returns the string representation

func (DescribeGatewayInformationInput) String

String returns the string representation

type DescribeGatewayInformationOutput

type DescribeGatewayInformationOutput struct {
	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string"`

	// The gateway ID.
	GatewayId *string `min:"12" type:"string"`

	// The gateway name.
	GatewayName *string `type:"string"`

	// A NetworkInterface array that contains descriptions of the gateway network
	// interfaces.
	GatewayNetworkInterfaces []*NetworkInterface `type:"list"`

	// One of the values that indicates the operating state of the gateway.
	GatewayState *string `min:"2" type:"string"`

	// One of the values that indicates the time zone configured for the gateway.
	GatewayTimezone *string `min:"3" type:"string"`

	// The type of the gateway.
	GatewayType *string `min:"2" type:"string"`

	// The date on which the last software update was applied to the gateway. If
	// the gateway has never been updated, this field does not return a value in
	// the response.
	LastSoftwareUpdate *string `min:"1" type:"string"`

	// The date on which an update to the gateway is available. This date is in
	// the time zone of the gateway. If the gateway is not available for an update
	// this field is not returned in the response.
	NextUpdateAvailabilityDate *string `min:"1" type:"string"`
	// contains filtered or unexported fields
}

A JSON object containing the following fields:

func (DescribeGatewayInformationOutput) GoString

GoString returns the string representation

func (DescribeGatewayInformationOutput) String

String returns the string representation

type DescribeMaintenanceStartTimeInput

type DescribeMaintenanceStartTimeInput struct {
	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A JSON object containing the of the gateway.

func (DescribeMaintenanceStartTimeInput) GoString

GoString returns the string representation

func (DescribeMaintenanceStartTimeInput) String

String returns the string representation

type DescribeMaintenanceStartTimeOutput

type DescribeMaintenanceStartTimeOutput struct {
	DayOfWeek *int64 `type:"integer"`

	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string"`

	HourOfDay *int64 `type:"integer"`

	MinuteOfHour *int64 `type:"integer"`

	Timezone *string `min:"3" type:"string"`
	// contains filtered or unexported fields
}

func (DescribeMaintenanceStartTimeOutput) GoString

GoString returns the string representation

func (DescribeMaintenanceStartTimeOutput) String

String returns the string representation

type DescribeSnapshotScheduleInput

type DescribeSnapshotScheduleInput struct {
	// The Amazon Resource Name (ARN) of the volume. Use the ListVolumes operation
	// to return a list of gateway volumes.
	VolumeARN *string `min:"50" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A JSON object containing the DescribeSnapshotScheduleInput$VolumeARN of the volume.

func (DescribeSnapshotScheduleInput) GoString

GoString returns the string representation

func (DescribeSnapshotScheduleInput) String

String returns the string representation

type DescribeSnapshotScheduleOutput

type DescribeSnapshotScheduleOutput struct {
	Description *string `min:"1" type:"string"`

	RecurrenceInHours *int64 `min:"1" type:"integer"`

	StartAt *int64 `type:"integer"`

	Timezone *string `min:"3" type:"string"`

	VolumeARN *string `min:"50" type:"string"`
	// contains filtered or unexported fields
}

func (DescribeSnapshotScheduleOutput) GoString

GoString returns the string representation

func (DescribeSnapshotScheduleOutput) String

String returns the string representation

type DescribeStorediSCSIVolumesInput

type DescribeStorediSCSIVolumesInput struct {
	// An array of strings where each string represents the Amazon Resource Name
	// (ARN) of a stored volume. All of the specified stored volumes must from the
	// same gateway. Use ListVolumes to get volume ARNs for a gateway.
	VolumeARNs []*string `type:"list" required:"true"`
	// contains filtered or unexported fields
}

A JSON Object containing a list of DescribeStorediSCSIVolumesInput$VolumeARNs.

func (DescribeStorediSCSIVolumesInput) GoString

GoString returns the string representation

func (DescribeStorediSCSIVolumesInput) String

String returns the string representation

type DescribeStorediSCSIVolumesOutput

type DescribeStorediSCSIVolumesOutput struct {
	StorediSCSIVolumes []*StorediSCSIVolume `type:"list"`
	// contains filtered or unexported fields
}

func (DescribeStorediSCSIVolumesOutput) GoString

GoString returns the string representation

func (DescribeStorediSCSIVolumesOutput) String

String returns the string representation

type DescribeTapeArchivesInput

type DescribeTapeArchivesInput struct {
	// Specifies that the number of virtual tapes descried be limited to the specified
	// number.
	Limit *int64 `min:"1" type:"integer"`

	// An opaque string that indicates the position at which to begin describing
	// virtual tapes.
	Marker *string `min:"1" type:"string"`

	// Specifies one or more unique Amazon Resource Names (ARNs) that represent
	// the virtual tapes you want to describe.
	TapeARNs []*string `type:"list"`
	// contains filtered or unexported fields
}

DescribeTapeArchivesInput

func (DescribeTapeArchivesInput) GoString

func (s DescribeTapeArchivesInput) GoString() string

GoString returns the string representation

func (DescribeTapeArchivesInput) String

func (s DescribeTapeArchivesInput) String() string

String returns the string representation

type DescribeTapeArchivesOutput

type DescribeTapeArchivesOutput struct {
	// An opaque string that indicates the position at which the virtual tapes that
	// were fetched for description ended. Use this marker in your next request
	// to fetch the next set of virtual tapes in the virtual tape shelf (VTS). If
	// there are no more virtual tapes to describe, this field does not appear in
	// the response.
	Marker *string `min:"1" type:"string"`

	// An array of virtual tape objects in the virtual tape shelf (VTS). The description
	// includes of the Amazon Resource Name(ARN) of the virtual tapes. The information
	// returned includes the Amazon Resource Names (ARNs) of the tapes, size of
	// the tapes, status of the tapes, progress of the description and tape barcode.
	TapeArchives []*TapeArchive `type:"list"`
	// contains filtered or unexported fields
}

DescribeTapeArchivesOutput

func (DescribeTapeArchivesOutput) GoString

func (s DescribeTapeArchivesOutput) GoString() string

GoString returns the string representation

func (DescribeTapeArchivesOutput) String

String returns the string representation

type DescribeTapeRecoveryPointsInput

type DescribeTapeRecoveryPointsInput struct {
	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string" required:"true"`

	// Specifies that the number of virtual tape recovery points that are described
	// be limited to the specified number.
	Limit *int64 `min:"1" type:"integer"`

	// An opaque string that indicates the position at which to begin describing
	// the virtual tape recovery points.
	Marker *string `min:"1" type:"string"`
	// contains filtered or unexported fields
}

DescribeTapeRecoveryPointsInput

func (DescribeTapeRecoveryPointsInput) GoString

GoString returns the string representation

func (DescribeTapeRecoveryPointsInput) String

String returns the string representation

type DescribeTapeRecoveryPointsOutput

type DescribeTapeRecoveryPointsOutput struct {
	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string"`

	// An opaque string that indicates the position at which the virtual tape recovery
	// points that were listed for description ended.
	//
	// Use this marker in your next request to list the next set of virtual tape
	// recovery points in the list. If there are no more recovery points to describe,
	// this field does not appear in the response.
	Marker *string `min:"1" type:"string"`

	// An array of TapeRecoveryPointInfos that are available for the specified gateway.
	TapeRecoveryPointInfos []*TapeRecoveryPointInfo `type:"list"`
	// contains filtered or unexported fields
}

DescribeTapeRecoveryPointsOutput

func (DescribeTapeRecoveryPointsOutput) GoString

GoString returns the string representation

func (DescribeTapeRecoveryPointsOutput) String

String returns the string representation

type DescribeTapesInput

type DescribeTapesInput struct {
	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string" required:"true"`

	// Specifies that the number of virtual tapes described be limited to the specified
	// number.
	//
	// Amazon Web Services may impose its own limit, if this field is not set.
	Limit *int64 `min:"1" type:"integer"`

	// A marker value, obtained in a previous call to DescribeTapes. This marker
	// indicates which page of results to retrieve.
	//
	// If not specified, the first page of results is retrieved.
	Marker *string `min:"1" type:"string"`

	// Specifies one or more unique Amazon Resource Names (ARNs) that represent
	// the virtual tapes you want to describe. If this parameter is not specified,
	// AWS Storage Gateway returns a description of all virtual tapes associated
	// with the specified gateway.
	TapeARNs []*string `type:"list"`
	// contains filtered or unexported fields
}

DescribeTapesInput

func (DescribeTapesInput) GoString

func (s DescribeTapesInput) GoString() string

GoString returns the string representation

func (DescribeTapesInput) String

func (s DescribeTapesInput) String() string

String returns the string representation

type DescribeTapesOutput

type DescribeTapesOutput struct {
	// An opaque string which can be used as part of a subsequent DescribeTapes
	// call to retrieve the next page of results.
	//
	// If a response does not contain a marker, then there are no more results
	// to be retrieved.
	Marker *string `min:"1" type:"string"`

	// An array of virtual tape descriptions.
	Tapes []*Tape `type:"list"`
	// contains filtered or unexported fields
}

DescribeTapesOutput

func (DescribeTapesOutput) GoString

func (s DescribeTapesOutput) GoString() string

GoString returns the string representation

func (DescribeTapesOutput) String

func (s DescribeTapesOutput) String() string

String returns the string representation

type DescribeUploadBufferInput

type DescribeUploadBufferInput struct {
	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string" required:"true"`
	// contains filtered or unexported fields
}

func (DescribeUploadBufferInput) GoString

func (s DescribeUploadBufferInput) GoString() string

GoString returns the string representation

func (DescribeUploadBufferInput) String

func (s DescribeUploadBufferInput) String() string

String returns the string representation

type DescribeUploadBufferOutput

type DescribeUploadBufferOutput struct {
	DiskIds []*string `type:"list"`

	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string"`

	UploadBufferAllocatedInBytes *int64 `type:"long"`

	UploadBufferUsedInBytes *int64 `type:"long"`
	// contains filtered or unexported fields
}

func (DescribeUploadBufferOutput) GoString

func (s DescribeUploadBufferOutput) GoString() string

GoString returns the string representation

func (DescribeUploadBufferOutput) String

String returns the string representation

type DescribeVTLDevicesInput

type DescribeVTLDevicesInput struct {
	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string" required:"true"`

	// Specifies that the number of VTL devices described be limited to the specified
	// number.
	Limit *int64 `min:"1" type:"integer"`

	// An opaque string that indicates the position at which to begin describing
	// the VTL devices.
	Marker *string `min:"1" type:"string"`

	// An array of strings, where each string represents the Amazon Resource Name
	// (ARN) of a VTL device.
	//
	// All of the specified VTL devices must be from the same gateway. If no VTL
	// devices are specified, the result will contain all devices on the specified
	// gateway.
	VTLDeviceARNs []*string `type:"list"`
	// contains filtered or unexported fields
}

DescribeVTLDevicesInput

func (DescribeVTLDevicesInput) GoString

func (s DescribeVTLDevicesInput) GoString() string

GoString returns the string representation

func (DescribeVTLDevicesInput) String

func (s DescribeVTLDevicesInput) String() string

String returns the string representation

type DescribeVTLDevicesOutput

type DescribeVTLDevicesOutput struct {
	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string"`

	// An opaque string that indicates the position at which the VTL devices that
	// were fetched for description ended. Use the marker in your next request to
	// fetch the next set of VTL devices in the list. If there are no more VTL devices
	// to describe, this field does not appear in the response.
	Marker *string `min:"1" type:"string"`

	// An array of VTL device objects composed of the Amazon Resource Name(ARN)
	// of the VTL devices.
	VTLDevices []*VTLDevice `type:"list"`
	// contains filtered or unexported fields
}

DescribeVTLDevicesOutput

func (DescribeVTLDevicesOutput) GoString

func (s DescribeVTLDevicesOutput) GoString() string

GoString returns the string representation

func (DescribeVTLDevicesOutput) String

func (s DescribeVTLDevicesOutput) String() string

String returns the string representation

type DescribeWorkingStorageInput

type DescribeWorkingStorageInput struct {
	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A JSON object containing the of the gateway.

func (DescribeWorkingStorageInput) GoString

func (s DescribeWorkingStorageInput) GoString() string

GoString returns the string representation

func (DescribeWorkingStorageInput) String

String returns the string representation

type DescribeWorkingStorageOutput

type DescribeWorkingStorageOutput struct {
	// An array of the gateway's local disk IDs that are configured as working storage.
	// Each local disk ID is specified as a string (minimum length of 1 and maximum
	// length of 300). If no local disks are configured as working storage, then
	// the DiskIds array is empty.
	DiskIds []*string `type:"list"`

	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string"`

	// The total working storage in bytes allocated for the gateway. If no working
	// storage is configured for the gateway, this field returns 0.
	WorkingStorageAllocatedInBytes *int64 `type:"long"`

	// The total working storage in bytes in use by the gateway. If no working storage
	// is configured for the gateway, this field returns 0.
	WorkingStorageUsedInBytes *int64 `type:"long"`
	// contains filtered or unexported fields
}

A JSON object containing the following fields:

func (DescribeWorkingStorageOutput) GoString

func (s DescribeWorkingStorageOutput) GoString() string

GoString returns the string representation

func (DescribeWorkingStorageOutput) String

String returns the string representation

type DeviceiSCSIAttributes

type DeviceiSCSIAttributes struct {
	// Indicates whether mutual CHAP is enabled for the iSCSI target.
	ChapEnabled *bool `type:"boolean"`

	// The network interface identifier of the VTL device.
	NetworkInterfaceId *string `type:"string"`

	// The port used to communicate with iSCSI VTL device targets.
	NetworkInterfacePort *int64 `type:"integer"`

	// Specifies the unique Amazon Resource Name(ARN) that encodes the iSCSI qualified
	// name(iqn) of a tape drive or media changer target.
	TargetARN *string `min:"50" type:"string"`
	// contains filtered or unexported fields
}

Lists iSCSI information about a VTL device.

func (DeviceiSCSIAttributes) GoString

func (s DeviceiSCSIAttributes) GoString() string

GoString returns the string representation

func (DeviceiSCSIAttributes) String

func (s DeviceiSCSIAttributes) String() string

String returns the string representation

type DisableGatewayInput

type DisableGatewayInput struct {
	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string" required:"true"`
	// contains filtered or unexported fields
}

DisableGatewayInput

func (DisableGatewayInput) GoString

func (s DisableGatewayInput) GoString() string

GoString returns the string representation

func (DisableGatewayInput) String

func (s DisableGatewayInput) String() string

String returns the string representation

type DisableGatewayOutput

type DisableGatewayOutput struct {
	// The unique Amazon Resource Name of the disabled gateway.
	GatewayARN *string `min:"50" type:"string"`
	// contains filtered or unexported fields
}

DisableGatewayOutput

func (DisableGatewayOutput) GoString

func (s DisableGatewayOutput) GoString() string

GoString returns the string representation

func (DisableGatewayOutput) String

func (s DisableGatewayOutput) String() string

String returns the string representation

type Disk

type Disk struct {
	DiskAllocationResource *string `type:"string"`

	DiskAllocationType *string `min:"3" type:"string"`

	DiskId *string `min:"1" type:"string"`

	DiskNode *string `type:"string"`

	DiskPath *string `type:"string"`

	DiskSizeInBytes *int64 `type:"long"`

	DiskStatus *string `type:"string"`
	// contains filtered or unexported fields
}

func (Disk) GoString

func (s Disk) GoString() string

GoString returns the string representation

func (Disk) String

func (s Disk) String() string

String returns the string representation

type Error

type Error struct {
	// Additional information about the error.
	ErrorCode *string `locationName:"errorCode" type:"string" enum:"ErrorCode"`

	// Human-readable text that provides detail about the error that occurred.
	ErrorDetails map[string]*string `locationName:"errorDetails" type:"map"`
	// contains filtered or unexported fields
}

Provides additional information about an error that was returned by the service as an or. See the errorCode and errorDetails members for more information about the error.

func (Error) GoString

func (s Error) GoString() string

GoString returns the string representation

func (Error) String

func (s Error) String() string

String returns the string representation

type GatewayInfo

type GatewayInfo struct {
	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string"`

	GatewayName *string `type:"string"`

	GatewayOperationalState *string `min:"2" type:"string"`

	GatewayType *string `min:"2" type:"string"`
	// contains filtered or unexported fields
}

func (GatewayInfo) GoString

func (s GatewayInfo) GoString() string

GoString returns the string representation

func (GatewayInfo) String

func (s GatewayInfo) String() string

String returns the string representation

type ListGatewaysInput

type ListGatewaysInput struct {
	// Specifies that the list of gateways returned be limited to the specified
	// number of items.
	Limit *int64 `min:"1" type:"integer"`

	// An opaque string that indicates the position at which to begin the returned
	// list of gateways.
	Marker *string `min:"1" type:"string"`
	// contains filtered or unexported fields
}

A JSON object containing zero or more of the following fields:

ListGatewaysInput$Limit   ListGatewaysInput$Marker

func (ListGatewaysInput) GoString

func (s ListGatewaysInput) GoString() string

GoString returns the string representation

func (ListGatewaysInput) String

func (s ListGatewaysInput) String() string

String returns the string representation

type ListGatewaysOutput

type ListGatewaysOutput struct {
	Gateways []*GatewayInfo `type:"list"`

	Marker *string `min:"1" type:"string"`
	// contains filtered or unexported fields
}

func (ListGatewaysOutput) GoString

func (s ListGatewaysOutput) GoString() string

GoString returns the string representation

func (ListGatewaysOutput) String

func (s ListGatewaysOutput) String() string

String returns the string representation

type ListLocalDisksInput

type ListLocalDisksInput struct {
	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A JSON object containing the of the gateway.

func (ListLocalDisksInput) GoString

func (s ListLocalDisksInput) GoString() string

GoString returns the string representation

func (ListLocalDisksInput) String

func (s ListLocalDisksInput) String() string

String returns the string representation

type ListLocalDisksOutput

type ListLocalDisksOutput struct {
	Disks []*Disk `type:"list"`

	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string"`
	// contains filtered or unexported fields
}

func (ListLocalDisksOutput) GoString

func (s ListLocalDisksOutput) GoString() string

GoString returns the string representation

func (ListLocalDisksOutput) String

func (s ListLocalDisksOutput) String() string

String returns the string representation

type ListTagsForResourceInput

type ListTagsForResourceInput struct {
	// Specifies that the list of tags returned be limited to the specified number
	// of items.
	Limit *int64 `min:"1" type:"integer"`

	// An opaque string that indicates the position at which to begin returning
	// the list of tags.
	Marker *string `min:"1" type:"string"`

	// The Amazon Resource Name (ARN) of the resource for which you want to list
	// tags.
	ResourceARN *string `min:"50" type:"string"`
	// contains filtered or unexported fields
}

ListTagsForResourceInput

func (ListTagsForResourceInput) GoString

func (s ListTagsForResourceInput) GoString() string

GoString returns the string representation

func (ListTagsForResourceInput) String

func (s ListTagsForResourceInput) String() string

String returns the string representation

type ListTagsForResourceOutput

type ListTagsForResourceOutput struct {
	// An opaque string that indicates the position at which to stop returning the
	// list of tags.
	Marker *string `min:"1" type:"string"`

	// he Amazon Resource Name (ARN) of the resource for which you want to list
	// tags.
	ResourceARN *string `min:"50" type:"string"`

	// An array that contains the tags for the specified resource.
	Tags []*Tag `type:"list"`
	// contains filtered or unexported fields
}

ListTagsForResourceOutput

func (ListTagsForResourceOutput) GoString

func (s ListTagsForResourceOutput) GoString() string

GoString returns the string representation

func (ListTagsForResourceOutput) String

func (s ListTagsForResourceOutput) String() string

String returns the string representation

type ListVolumeInitiatorsInput

type ListVolumeInitiatorsInput struct {
	// The Amazon Resource Name (ARN) of the volume. Use the ListVolumes operation
	// to return a list of gateway volumes for the gateway.
	VolumeARN *string `min:"50" type:"string" required:"true"`
	// contains filtered or unexported fields
}

ListVolumeInitiatorsInput

func (ListVolumeInitiatorsInput) GoString

func (s ListVolumeInitiatorsInput) GoString() string

GoString returns the string representation

func (ListVolumeInitiatorsInput) String

func (s ListVolumeInitiatorsInput) String() string

String returns the string representation

type ListVolumeInitiatorsOutput

type ListVolumeInitiatorsOutput struct {
	// The host names and port numbers of all iSCSI initiators that are connected
	// to the gateway.
	Initiators []*string `type:"list"`
	// contains filtered or unexported fields
}

ListVolumeInitiatorsOutput

func (ListVolumeInitiatorsOutput) GoString

func (s ListVolumeInitiatorsOutput) GoString() string

GoString returns the string representation

func (ListVolumeInitiatorsOutput) String

String returns the string representation

type ListVolumeRecoveryPointsInput

type ListVolumeRecoveryPointsInput struct {
	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string" required:"true"`
	// contains filtered or unexported fields
}

func (ListVolumeRecoveryPointsInput) GoString

GoString returns the string representation

func (ListVolumeRecoveryPointsInput) String

String returns the string representation

type ListVolumeRecoveryPointsOutput

type ListVolumeRecoveryPointsOutput struct {
	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string"`

	VolumeRecoveryPointInfos []*VolumeRecoveryPointInfo `type:"list"`
	// contains filtered or unexported fields
}

func (ListVolumeRecoveryPointsOutput) GoString

GoString returns the string representation

func (ListVolumeRecoveryPointsOutput) String

String returns the string representation

type ListVolumesInput

type ListVolumesInput struct {
	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string" required:"true"`

	// Specifies that the list of volumes returned be limited to the specified number
	// of items.
	Limit *int64 `min:"1" type:"integer"`

	// A string that indicates the position at which to begin the returned list
	// of volumes. Obtain the marker from the response of a previous List iSCSI
	// Volumes request.
	Marker *string `min:"1" type:"string"`
	// contains filtered or unexported fields
}

A JSON object that contains one or more of the following fields:

ListVolumesInput$Limit   ListVolumesInput$Marker

func (ListVolumesInput) GoString

func (s ListVolumesInput) GoString() string

GoString returns the string representation

func (ListVolumesInput) String

func (s ListVolumesInput) String() string

String returns the string representation

type ListVolumesOutput

type ListVolumesOutput struct {
	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string"`

	Marker *string `min:"1" type:"string"`

	VolumeInfos []*VolumeInfo `type:"list"`
	// contains filtered or unexported fields
}

func (ListVolumesOutput) GoString

func (s ListVolumesOutput) GoString() string

GoString returns the string representation

func (ListVolumesOutput) String

func (s ListVolumesOutput) String() string

String returns the string representation

type NetworkInterface

type NetworkInterface struct {
	// The Internet Protocol version 4 (IPv4) address of the interface.
	Ipv4Address *string `type:"string"`

	// The Internet Protocol version 6 (IPv6) address of the interface. Currently
	// not supported.
	Ipv6Address *string `type:"string"`

	// The Media Access Control (MAC) address of the interface.
	//
	// This is currently unsupported and will not be returned in output.
	MacAddress *string `type:"string"`
	// contains filtered or unexported fields
}

Describes a gateway's network interface.

func (NetworkInterface) GoString

func (s NetworkInterface) GoString() string

GoString returns the string representation

func (NetworkInterface) String

func (s NetworkInterface) String() string

String returns the string representation

type RemoveTagsFromResourceInput

type RemoveTagsFromResourceInput struct {
	// The Amazon Resource Name (ARN) of the resource you want to remove the tags
	// from.
	ResourceARN *string `min:"50" type:"string"`

	// The keys of the tags you want to remove from the specified resource. A tag
	// is composed of a key/value pair.
	TagKeys []*string `type:"list"`
	// contains filtered or unexported fields
}

RemoveTagsFromResourceInput

func (RemoveTagsFromResourceInput) GoString

func (s RemoveTagsFromResourceInput) GoString() string

GoString returns the string representation

func (RemoveTagsFromResourceInput) String

String returns the string representation

type RemoveTagsFromResourceOutput

type RemoveTagsFromResourceOutput struct {
	// The Amazon Resource Name (ARN) of the resource that the tags were removed
	// from.
	ResourceARN *string `min:"50" type:"string"`
	// contains filtered or unexported fields
}

RemoveTagsFromResourceOutput

func (RemoveTagsFromResourceOutput) GoString

func (s RemoveTagsFromResourceOutput) GoString() string

GoString returns the string representation

func (RemoveTagsFromResourceOutput) String

String returns the string representation

type ResetCacheInput

type ResetCacheInput struct {
	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string" required:"true"`
	// contains filtered or unexported fields
}

func (ResetCacheInput) GoString

func (s ResetCacheInput) GoString() string

GoString returns the string representation

func (ResetCacheInput) String

func (s ResetCacheInput) String() string

String returns the string representation

type ResetCacheOutput

type ResetCacheOutput struct {
	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string"`
	// contains filtered or unexported fields
}

func (ResetCacheOutput) GoString

func (s ResetCacheOutput) GoString() string

GoString returns the string representation

func (ResetCacheOutput) String

func (s ResetCacheOutput) String() string

String returns the string representation

type RetrieveTapeArchiveInput

type RetrieveTapeArchiveInput struct {
	// The Amazon Resource Name (ARN) of the gateway you want to retrieve the virtual
	// tape to. Use the ListGateways operation to return a list of gateways for
	// your account and region.
	//
	// You retrieve archived virtual tapes to only one gateway and the gateway
	// must be a gateway-VTL.
	GatewayARN *string `min:"50" type:"string" required:"true"`

	// The Amazon Resource Name (ARN) of the virtual tape you want to retrieve from
	// the virtual tape shelf (VTS).
	TapeARN *string `min:"50" type:"string" required:"true"`
	// contains filtered or unexported fields
}

RetrieveTapeArchiveInput

func (RetrieveTapeArchiveInput) GoString

func (s RetrieveTapeArchiveInput) GoString() string

GoString returns the string representation

func (RetrieveTapeArchiveInput) String

func (s RetrieveTapeArchiveInput) String() string

String returns the string representation

type RetrieveTapeArchiveOutput

type RetrieveTapeArchiveOutput struct {
	// The Amazon Resource Name (ARN) of the retrieved virtual tape.
	TapeARN *string `min:"50" type:"string"`
	// contains filtered or unexported fields
}

RetrieveTapeArchiveOutput

func (RetrieveTapeArchiveOutput) GoString

func (s RetrieveTapeArchiveOutput) GoString() string

GoString returns the string representation

func (RetrieveTapeArchiveOutput) String

func (s RetrieveTapeArchiveOutput) String() string

String returns the string representation

type RetrieveTapeRecoveryPointInput

type RetrieveTapeRecoveryPointInput struct {
	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string" required:"true"`

	// The Amazon Resource Name (ARN) of the virtual tape for which you want to
	// retrieve the recovery point.
	TapeARN *string `min:"50" type:"string" required:"true"`
	// contains filtered or unexported fields
}

RetrieveTapeRecoveryPointInput

func (RetrieveTapeRecoveryPointInput) GoString

GoString returns the string representation

func (RetrieveTapeRecoveryPointInput) String

String returns the string representation

type RetrieveTapeRecoveryPointOutput

type RetrieveTapeRecoveryPointOutput struct {
	// The Amazon Resource Name (ARN) of the virtual tape for which the recovery
	// point was retrieved.
	TapeARN *string `min:"50" type:"string"`
	// contains filtered or unexported fields
}

RetrieveTapeRecoveryPointOutput

func (RetrieveTapeRecoveryPointOutput) GoString

GoString returns the string representation

func (RetrieveTapeRecoveryPointOutput) String

String returns the string representation

type ShutdownGatewayInput

type ShutdownGatewayInput struct {
	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A JSON object containing the of the gateway to shut down.

func (ShutdownGatewayInput) GoString

func (s ShutdownGatewayInput) GoString() string

GoString returns the string representation

func (ShutdownGatewayInput) String

func (s ShutdownGatewayInput) String() string

String returns the string representation

type ShutdownGatewayOutput

type ShutdownGatewayOutput struct {
	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string"`
	// contains filtered or unexported fields
}

A JSON object containing the of the gateway that was shut down.

func (ShutdownGatewayOutput) GoString

func (s ShutdownGatewayOutput) GoString() string

GoString returns the string representation

func (ShutdownGatewayOutput) String

func (s ShutdownGatewayOutput) String() string

String returns the string representation

type StartGatewayInput

type StartGatewayInput struct {
	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A JSON object containing the of the gateway to start.

func (StartGatewayInput) GoString

func (s StartGatewayInput) GoString() string

GoString returns the string representation

func (StartGatewayInput) String

func (s StartGatewayInput) String() string

String returns the string representation

type StartGatewayOutput

type StartGatewayOutput struct {
	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string"`
	// contains filtered or unexported fields
}

A JSON object containing the of the gateway that was restarted.

func (StartGatewayOutput) GoString

func (s StartGatewayOutput) GoString() string

GoString returns the string representation

func (StartGatewayOutput) String

func (s StartGatewayOutput) String() string

String returns the string representation

type StorageGateway

type StorageGateway struct {
	*client.Client
}

AWS Storage Gateway is the service that connects an on-premises software appliance with cloud-based storage to provide seamless and secure integration between an organization's on-premises IT environment and AWS's storage infrastructure. The service enables you to securely upload data to the AWS cloud for cost effective backup and rapid disaster recovery.

Use the following links to get started using the AWS Storage Gateway Service API Reference:

AWS Storage Gateway Required Request Headers (http://docs.aws.amazon.com/storagegateway/latest/userguide/AWSStorageGatewayHTTPRequestsHeaders.html):

Describes the required headers that you must send with every POST request to AWS Storage Gateway. Signing Requests (http://docs.aws.amazon.com/storagegateway/latest/userguide/AWSStorageGatewaySigningRequests.html): AWS Storage Gateway requires that you authenticate every request you send; this topic describes how sign such a request. Error Responses (http://docs.aws.amazon.com/storagegateway/latest/userguide/APIErrorResponses.html): Provides reference information about AWS Storage Gateway errors. Operations in AWS Storage Gateway (http://docs.aws.amazon.com/storagegateway/latest/userguide/AWSStorageGatewayAPIOperations.html): Contains detailed descriptions of all AWS Storage Gateway operations, their request parameters, response elements, possible errors, and examples of requests and responses. AWS Storage Gateway Regions and Endpoints (http://docs.aws.amazon.com/general/latest/gr/index.html?rande.html): Provides a list of each of the regions and endpoints available for use with AWS Storage Gateway. The service client's operations are safe to be used concurrently. It is not safe to mutate any of the client's properties though.

func New

func New(p client.ConfigProvider, cfgs ...*aws.Config) *StorageGateway

New creates a new instance of the StorageGateway client with a session. If additional configuration is needed for the client instance use the optional aws.Config parameter to add your extra config.

Example:

// Create a StorageGateway client from just a session.
svc := storagegateway.New(mySession)

// Create a StorageGateway client with additional configuration
svc := storagegateway.New(mySession, aws.NewConfig().WithRegion("us-west-2"))

func (*StorageGateway) ActivateGateway

func (c *StorageGateway) ActivateGateway(input *ActivateGatewayInput) (*ActivateGatewayOutput, error)

This operation activates the gateway you previously deployed on your host. For more information, see Activate the AWS Storage Gateway (http://docs.aws.amazon.com/storagegateway/latest/userguide/GettingStartedActivateGateway-common.html). In the activation process, you specify information such as the region you want to use for storing snapshots, the time zone for scheduled snapshots the gateway snapshot schedule window, an activation key, and a name for your gateway. The activation process also associates your gateway with your account; for more information, see UpdateGatewayInformation.

You must turn on the gateway VM before you can activate your gateway.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.ActivateGatewayInput{
		ActivationKey:     aws.String("ActivationKey"),   // Required
		GatewayName:       aws.String("GatewayName"),     // Required
		GatewayRegion:     aws.String("RegionId"),        // Required
		GatewayTimezone:   aws.String("GatewayTimezone"), // Required
		GatewayType:       aws.String("GatewayType"),
		MediumChangerType: aws.String("MediumChangerType"),
		TapeDriveType:     aws.String("TapeDriveType"),
	}
	resp, err := svc.ActivateGateway(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) ActivateGatewayRequest

func (c *StorageGateway) ActivateGatewayRequest(input *ActivateGatewayInput) (req *request.Request, output *ActivateGatewayOutput)

ActivateGatewayRequest generates a request for the ActivateGateway operation.

func (*StorageGateway) AddCache

func (c *StorageGateway) AddCache(input *AddCacheInput) (*AddCacheOutput, error)

This operation configures one or more gateway local disks as cache for a cached-volume gateway. This operation is supported only for the gateway-cached volume architecture (see Storage Gateway Concepts (http://docs.aws.amazon.com/storagegateway/latest/userguide/StorageGatewayConcepts.html)).

In the request, you specify the gateway Amazon Resource Name (ARN) to which you want to add cache, and one or more disk IDs that you want to configure as cache.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.AddCacheInput{
		DiskIds: []*string{ // Required
			aws.String("DiskId"), // Required
			// More values...
		},
		GatewayARN: aws.String("GatewayARN"), // Required
	}
	resp, err := svc.AddCache(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) AddCacheRequest

func (c *StorageGateway) AddCacheRequest(input *AddCacheInput) (req *request.Request, output *AddCacheOutput)

AddCacheRequest generates a request for the AddCache operation.

func (*StorageGateway) AddTagsToResource

func (c *StorageGateway) AddTagsToResource(input *AddTagsToResourceInput) (*AddTagsToResourceOutput, error)

This operation adds one or more tags to the specified resource. You use tags to add metadata to resources, which you can use to categorize these resources. For example, you can categorize resources by purpose, owner, environment, or team. Each tag consists of a key and a value, which you define. You can add tags to the following AWS Storage Gateway resources:

Storage gateways of all types

 Storage Volumes

 Virtual Tapes

You can create a maximum of 10 tags for each resource. Virtual tapes and

storage volumes that are recovered to a new gateway maintain their tags.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.AddTagsToResourceInput{
		ResourceARN: aws.String("ResourceARN"), // Required
		Tags: []*storagegateway.Tag{ // Required
			{ // Required
				Key:   aws.String("TagKey"),   // Required
				Value: aws.String("TagValue"), // Required
			},
			// More values...
		},
	}
	resp, err := svc.AddTagsToResource(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) AddTagsToResourceRequest

func (c *StorageGateway) AddTagsToResourceRequest(input *AddTagsToResourceInput) (req *request.Request, output *AddTagsToResourceOutput)

AddTagsToResourceRequest generates a request for the AddTagsToResource operation.

func (*StorageGateway) AddUploadBuffer

func (c *StorageGateway) AddUploadBuffer(input *AddUploadBufferInput) (*AddUploadBufferOutput, error)

This operation configures one or more gateway local disks as upload buffer for a specified gateway. This operation is supported for both the gateway-stored and gateway-cached volume architectures.

In the request, you specify the gateway Amazon Resource Name (ARN) to which

you want to add upload buffer, and one or more disk IDs that you want to configure as upload buffer.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.AddUploadBufferInput{
		DiskIds: []*string{ // Required
			aws.String("DiskId"), // Required
			// More values...
		},
		GatewayARN: aws.String("GatewayARN"), // Required
	}
	resp, err := svc.AddUploadBuffer(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) AddUploadBufferRequest

func (c *StorageGateway) AddUploadBufferRequest(input *AddUploadBufferInput) (req *request.Request, output *AddUploadBufferOutput)

AddUploadBufferRequest generates a request for the AddUploadBuffer operation.

func (*StorageGateway) AddWorkingStorage

func (c *StorageGateway) AddWorkingStorage(input *AddWorkingStorageInput) (*AddWorkingStorageOutput, error)

This operation configures one or more gateway local disks as working storage for a gateway. This operation is supported only for the gateway-stored volume architecture. This operation is deprecated method in cached-volumes API version (20120630). Use AddUploadBuffer instead.

Working storage is also referred to as upload buffer. You can also use the AddUploadBuffer operation to add upload buffer to a stored-volume gateway.

In the request, you specify the gateway Amazon Resource Name (ARN) to which you want to add working storage, and one or more disk IDs that you want to configure as working storage.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.AddWorkingStorageInput{
		DiskIds: []*string{ // Required
			aws.String("DiskId"), // Required
			// More values...
		},
		GatewayARN: aws.String("GatewayARN"), // Required
	}
	resp, err := svc.AddWorkingStorage(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) AddWorkingStorageRequest

func (c *StorageGateway) AddWorkingStorageRequest(input *AddWorkingStorageInput) (req *request.Request, output *AddWorkingStorageOutput)

AddWorkingStorageRequest generates a request for the AddWorkingStorage operation.

func (*StorageGateway) CancelArchival

func (c *StorageGateway) CancelArchival(input *CancelArchivalInput) (*CancelArchivalOutput, error)

Cancels archiving of a virtual tape to the virtual tape shelf (VTS) after the archiving process is initiated.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.CancelArchivalInput{
		GatewayARN: aws.String("GatewayARN"), // Required
		TapeARN:    aws.String("TapeARN"),    // Required
	}
	resp, err := svc.CancelArchival(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) CancelArchivalRequest

func (c *StorageGateway) CancelArchivalRequest(input *CancelArchivalInput) (req *request.Request, output *CancelArchivalOutput)

CancelArchivalRequest generates a request for the CancelArchival operation.

func (*StorageGateway) CancelRetrieval

func (c *StorageGateway) CancelRetrieval(input *CancelRetrievalInput) (*CancelRetrievalOutput, error)

Cancels retrieval of a virtual tape from the virtual tape shelf (VTS) to a gateway after the retrieval process is initiated. The virtual tape is returned to the VTS.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.CancelRetrievalInput{
		GatewayARN: aws.String("GatewayARN"), // Required
		TapeARN:    aws.String("TapeARN"),    // Required
	}
	resp, err := svc.CancelRetrieval(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) CancelRetrievalRequest

func (c *StorageGateway) CancelRetrievalRequest(input *CancelRetrievalInput) (req *request.Request, output *CancelRetrievalOutput)

CancelRetrievalRequest generates a request for the CancelRetrieval operation.

func (*StorageGateway) CreateCachediSCSIVolume

func (c *StorageGateway) CreateCachediSCSIVolume(input *CreateCachediSCSIVolumeInput) (*CreateCachediSCSIVolumeOutput, error)

This operation creates a cached volume on a specified cached gateway. This operation is supported only for the gateway-cached volume architecture.

Cache storage must be allocated to the gateway before you can create a cached volume. Use the AddCache operation to add cache storage to a gateway. In the request, you must specify the gateway, size of the volume in bytes, the iSCSI target name, an IP address on which to expose the target, and a unique client token. In response, AWS Storage Gateway creates the volume and returns information about it such as the volume Amazon Resource Name (ARN), its size, and the iSCSI target ARN that initiators can use to connect to the volume target.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.CreateCachediSCSIVolumeInput{
		ClientToken:        aws.String("ClientToken"),        // Required
		GatewayARN:         aws.String("GatewayARN"),         // Required
		NetworkInterfaceId: aws.String("NetworkInterfaceId"), // Required
		TargetName:         aws.String("TargetName"),         // Required
		VolumeSizeInBytes:  aws.Int64(1),                     // Required
		SnapshotId:         aws.String("SnapshotId"),
	}
	resp, err := svc.CreateCachediSCSIVolume(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) CreateCachediSCSIVolumeRequest

func (c *StorageGateway) CreateCachediSCSIVolumeRequest(input *CreateCachediSCSIVolumeInput) (req *request.Request, output *CreateCachediSCSIVolumeOutput)

CreateCachediSCSIVolumeRequest generates a request for the CreateCachediSCSIVolume operation.

func (*StorageGateway) CreateSnapshot

func (c *StorageGateway) CreateSnapshot(input *CreateSnapshotInput) (*CreateSnapshotOutput, error)

This operation initiates a snapshot of a volume.

AWS Storage Gateway provides the ability to back up point-in-time snapshots of your data to Amazon Simple Storage (S3) for durable off-site recovery, as well as import the data to an Amazon Elastic Block Store (EBS) volume in Amazon Elastic Compute Cloud (EC2). You can take snapshots of your gateway volume on a scheduled or ad-hoc basis. This API enables you to take ad-hoc snapshot. For more information, see Working With Snapshots in the AWS Storage Gateway Console (http://docs.aws.amazon.com/storagegateway/latest/userguide/WorkingWithSnapshots.html).

In the CreateSnapshot request you identify the volume by providing its Amazon Resource Name (ARN). You must also provide description for the snapshot. When AWS Storage Gateway takes the snapshot of specified volume, the snapshot and description appears in the AWS Storage Gateway Console. In response, AWS Storage Gateway returns you a snapshot ID. You can use this snapshot ID to check the snapshot progress or later use it when you want to create a volume from a snapshot.

To list or delete a snapshot, you must use the Amazon EC2 API. For more information, see DescribeSnapshots or DeleteSnapshot in the EC2 API reference (http://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_Operations.html).

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.CreateSnapshotInput{
		SnapshotDescription: aws.String("SnapshotDescription"), // Required
		VolumeARN:           aws.String("VolumeARN"),           // Required
	}
	resp, err := svc.CreateSnapshot(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) CreateSnapshotFromVolumeRecoveryPoint

This operation initiates a snapshot of a gateway from a volume recovery point. This operation is supported only for the gateway-cached volume architecture (see ).

A volume recovery point is a point in time at which all data of the volume is consistent and from which you can create a snapshot. To get a list of volume recovery point for gateway-cached volumes, use ListVolumeRecoveryPoints.

In the CreateSnapshotFromVolumeRecoveryPoint request, you identify the volume by providing its Amazon Resource Name (ARN). You must also provide a description for the snapshot. When AWS Storage Gateway takes a snapshot of the specified volume, the snapshot and its description appear in the AWS Storage Gateway console. In response, AWS Storage Gateway returns you a snapshot ID. You can use this snapshot ID to check the snapshot progress or later use it when you want to create a volume from a snapshot.

To list or delete a snapshot, you must use the Amazon EC2 API. For more

information, in Amazon Elastic Compute Cloud API Reference.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.CreateSnapshotFromVolumeRecoveryPointInput{
		SnapshotDescription: aws.String("SnapshotDescription"), // Required
		VolumeARN:           aws.String("VolumeARN"),           // Required
	}
	resp, err := svc.CreateSnapshotFromVolumeRecoveryPoint(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) CreateSnapshotFromVolumeRecoveryPointRequest

func (c *StorageGateway) CreateSnapshotFromVolumeRecoveryPointRequest(input *CreateSnapshotFromVolumeRecoveryPointInput) (req *request.Request, output *CreateSnapshotFromVolumeRecoveryPointOutput)

CreateSnapshotFromVolumeRecoveryPointRequest generates a request for the CreateSnapshotFromVolumeRecoveryPoint operation.

func (*StorageGateway) CreateSnapshotRequest

func (c *StorageGateway) CreateSnapshotRequest(input *CreateSnapshotInput) (req *request.Request, output *CreateSnapshotOutput)

CreateSnapshotRequest generates a request for the CreateSnapshot operation.

func (*StorageGateway) CreateStorediSCSIVolume

func (c *StorageGateway) CreateStorediSCSIVolume(input *CreateStorediSCSIVolumeInput) (*CreateStorediSCSIVolumeOutput, error)

This operation creates a volume on a specified gateway. This operation is supported only for the gateway-stored volume architecture.

The size of the volume to create is inferred from the disk size. You can choose to preserve existing data on the disk, create volume from an existing snapshot, or create an empty volume. If you choose to create an empty gateway volume, then any existing data on the disk is erased.

In the request you must specify the gateway and the disk information on which you are creating the volume. In response, AWS Storage Gateway creates the volume and returns volume information such as the volume Amazon Resource Name (ARN), its size, and the iSCSI target ARN that initiators can use to connect to the volume target.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.CreateStorediSCSIVolumeInput{
		DiskId:               aws.String("DiskId"),             // Required
		GatewayARN:           aws.String("GatewayARN"),         // Required
		NetworkInterfaceId:   aws.String("NetworkInterfaceId"), // Required
		PreserveExistingData: aws.Bool(true),                   // Required
		TargetName:           aws.String("TargetName"),         // Required
		SnapshotId:           aws.String("SnapshotId"),
	}
	resp, err := svc.CreateStorediSCSIVolume(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) CreateStorediSCSIVolumeRequest

func (c *StorageGateway) CreateStorediSCSIVolumeRequest(input *CreateStorediSCSIVolumeInput) (req *request.Request, output *CreateStorediSCSIVolumeOutput)

CreateStorediSCSIVolumeRequest generates a request for the CreateStorediSCSIVolume operation.

func (*StorageGateway) CreateTapes

func (c *StorageGateway) CreateTapes(input *CreateTapesInput) (*CreateTapesOutput, error)

Creates one or more virtual tapes. You write data to the virtual tapes and then archive the tapes.

Cache storage must be allocated to the gateway before you can create virtual tapes. Use the AddCache operation to add cache storage to a gateway.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.CreateTapesInput{
		ClientToken:       aws.String("ClientToken"),       // Required
		GatewayARN:        aws.String("GatewayARN"),        // Required
		NumTapesToCreate:  aws.Int64(1),                    // Required
		TapeBarcodePrefix: aws.String("TapeBarcodePrefix"), // Required
		TapeSizeInBytes:   aws.Int64(1),                    // Required
	}
	resp, err := svc.CreateTapes(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) CreateTapesRequest

func (c *StorageGateway) CreateTapesRequest(input *CreateTapesInput) (req *request.Request, output *CreateTapesOutput)

CreateTapesRequest generates a request for the CreateTapes operation.

func (*StorageGateway) DeleteBandwidthRateLimit

func (c *StorageGateway) DeleteBandwidthRateLimit(input *DeleteBandwidthRateLimitInput) (*DeleteBandwidthRateLimitOutput, error)

This operation deletes the bandwidth rate limits of a gateway. You can delete either the upload and download bandwidth rate limit, or you can delete both. If you delete only one of the limits, the other limit remains unchanged. To specify which gateway to work with, use the Amazon Resource Name (ARN) of the gateway in your request.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.DeleteBandwidthRateLimitInput{
		BandwidthType: aws.String("BandwidthType"), // Required
		GatewayARN:    aws.String("GatewayARN"),    // Required
	}
	resp, err := svc.DeleteBandwidthRateLimit(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) DeleteBandwidthRateLimitRequest

func (c *StorageGateway) DeleteBandwidthRateLimitRequest(input *DeleteBandwidthRateLimitInput) (req *request.Request, output *DeleteBandwidthRateLimitOutput)

DeleteBandwidthRateLimitRequest generates a request for the DeleteBandwidthRateLimit operation.

func (*StorageGateway) DeleteChapCredentials

func (c *StorageGateway) DeleteChapCredentials(input *DeleteChapCredentialsInput) (*DeleteChapCredentialsOutput, error)

This operation deletes Challenge-Handshake Authentication Protocol (CHAP) credentials for a specified iSCSI target and initiator pair.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.DeleteChapCredentialsInput{
		InitiatorName: aws.String("IqnName"),   // Required
		TargetARN:     aws.String("TargetARN"), // Required
	}
	resp, err := svc.DeleteChapCredentials(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) DeleteChapCredentialsRequest

func (c *StorageGateway) DeleteChapCredentialsRequest(input *DeleteChapCredentialsInput) (req *request.Request, output *DeleteChapCredentialsOutput)

DeleteChapCredentialsRequest generates a request for the DeleteChapCredentials operation.

func (*StorageGateway) DeleteGateway

func (c *StorageGateway) DeleteGateway(input *DeleteGatewayInput) (*DeleteGatewayOutput, error)

This operation deletes a gateway. To specify which gateway to delete, use the Amazon Resource Name (ARN) of the gateway in your request. The operation deletes the gateway; however, it does not delete the gateway virtual machine (VM) from your host computer.

After you delete a gateway, you cannot reactivate it. Completed snapshots of the gateway volumes are not deleted upon deleting the gateway, however, pending snapshots will not complete. After you delete a gateway, your next step is to remove it from your environment.

You no longer pay software charges after the gateway is deleted; however,

your existing Amazon EBS snapshots persist and you will continue to be billed for these snapshots. You can choose to remove all remaining Amazon EBS snapshots by canceling your Amazon EC2 subscription.  If you prefer not to cancel your Amazon EC2 subscription, you can delete your snapshots using the Amazon EC2 console. For more information, see the AWS Storage Gateway Detail Page (http://aws.amazon.com/storagegateway).

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.DeleteGatewayInput{
		GatewayARN: aws.String("GatewayARN"), // Required
	}
	resp, err := svc.DeleteGateway(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) DeleteGatewayRequest

func (c *StorageGateway) DeleteGatewayRequest(input *DeleteGatewayInput) (req *request.Request, output *DeleteGatewayOutput)

DeleteGatewayRequest generates a request for the DeleteGateway operation.

func (*StorageGateway) DeleteSnapshotSchedule

func (c *StorageGateway) DeleteSnapshotSchedule(input *DeleteSnapshotScheduleInput) (*DeleteSnapshotScheduleOutput, error)

This operation deletes a snapshot of a volume.

You can take snapshots of your gateway volumes on a scheduled or ad-hoc

basis. This API enables you to delete a snapshot schedule for a volume. For more information, see Working with Snapshots (http://docs.aws.amazon.com/storagegateway/latest/userguide/WorkingWithSnapshots.html). In the DeleteSnapshotSchedule request, you identify the volume by providing its Amazon Resource Name (ARN).

To list or delete a snapshot, you must use the Amazon EC2 API. in Amazon

Elastic Compute Cloud API Reference.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.DeleteSnapshotScheduleInput{
		VolumeARN: aws.String("VolumeARN"), // Required
	}
	resp, err := svc.DeleteSnapshotSchedule(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) DeleteSnapshotScheduleRequest

func (c *StorageGateway) DeleteSnapshotScheduleRequest(input *DeleteSnapshotScheduleInput) (req *request.Request, output *DeleteSnapshotScheduleOutput)

DeleteSnapshotScheduleRequest generates a request for the DeleteSnapshotSchedule operation.

func (*StorageGateway) DeleteTape

func (c *StorageGateway) DeleteTape(input *DeleteTapeInput) (*DeleteTapeOutput, error)

Deletes the specified virtual tape.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.DeleteTapeInput{
		GatewayARN: aws.String("GatewayARN"), // Required
		TapeARN:    aws.String("TapeARN"),    // Required
	}
	resp, err := svc.DeleteTape(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) DeleteTapeArchive

func (c *StorageGateway) DeleteTapeArchive(input *DeleteTapeArchiveInput) (*DeleteTapeArchiveOutput, error)

Deletes the specified virtual tape from the virtual tape shelf (VTS).

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.DeleteTapeArchiveInput{
		TapeARN: aws.String("TapeARN"), // Required
	}
	resp, err := svc.DeleteTapeArchive(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) DeleteTapeArchiveRequest

func (c *StorageGateway) DeleteTapeArchiveRequest(input *DeleteTapeArchiveInput) (req *request.Request, output *DeleteTapeArchiveOutput)

DeleteTapeArchiveRequest generates a request for the DeleteTapeArchive operation.

func (*StorageGateway) DeleteTapeRequest

func (c *StorageGateway) DeleteTapeRequest(input *DeleteTapeInput) (req *request.Request, output *DeleteTapeOutput)

DeleteTapeRequest generates a request for the DeleteTape operation.

func (*StorageGateway) DeleteVolume

func (c *StorageGateway) DeleteVolume(input *DeleteVolumeInput) (*DeleteVolumeOutput, error)

This operation deletes the specified gateway volume that you previously created using the CreateCachediSCSIVolume or CreateStorediSCSIVolume API. For gateway-stored volumes, the local disk that was configured as the storage volume is not deleted. You can reuse the local disk to create another storage volume.

Before you delete a gateway volume, make sure there are no iSCSI connections to the volume you are deleting. You should also make sure there is no snapshot in progress. You can use the Amazon Elastic Compute Cloud (Amazon EC2) API to query snapshots on the volume you are deleting and check the snapshot status. For more information, go to DescribeSnapshots (http://docs.aws.amazon.com/AWSEC2/latest/APIReference/ApiReference-query-DescribeSnapshots.html) in the Amazon Elastic Compute Cloud API Reference.

In the request, you must provide the Amazon Resource Name (ARN) of the storage volume you want to delete.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.DeleteVolumeInput{
		VolumeARN: aws.String("VolumeARN"), // Required
	}
	resp, err := svc.DeleteVolume(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) DeleteVolumeRequest

func (c *StorageGateway) DeleteVolumeRequest(input *DeleteVolumeInput) (req *request.Request, output *DeleteVolumeOutput)

DeleteVolumeRequest generates a request for the DeleteVolume operation.

func (*StorageGateway) DescribeBandwidthRateLimit

This operation returns the bandwidth rate limits of a gateway. By default, these limits are not set, which means no bandwidth rate limiting is in effect.

This operation only returns a value for a bandwidth rate limit only if the limit is set. If no limits are set for the gateway, then this operation returns only the gateway ARN in the response body. To specify which gateway to describe, use the Amazon Resource Name (ARN) of the gateway in your request.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.DescribeBandwidthRateLimitInput{
		GatewayARN: aws.String("GatewayARN"), // Required
	}
	resp, err := svc.DescribeBandwidthRateLimit(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) DescribeBandwidthRateLimitRequest

func (c *StorageGateway) DescribeBandwidthRateLimitRequest(input *DescribeBandwidthRateLimitInput) (req *request.Request, output *DescribeBandwidthRateLimitOutput)

DescribeBandwidthRateLimitRequest generates a request for the DescribeBandwidthRateLimit operation.

func (*StorageGateway) DescribeCache

func (c *StorageGateway) DescribeCache(input *DescribeCacheInput) (*DescribeCacheOutput, error)

This operation returns information about the cache of a gateway. This operation is supported only for the gateway-cached volume architecture.

The response includes disk IDs that are configured as cache, and it includes

the amount of cache allocated and used.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.DescribeCacheInput{
		GatewayARN: aws.String("GatewayARN"), // Required
	}
	resp, err := svc.DescribeCache(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) DescribeCacheRequest

func (c *StorageGateway) DescribeCacheRequest(input *DescribeCacheInput) (req *request.Request, output *DescribeCacheOutput)

DescribeCacheRequest generates a request for the DescribeCache operation.

func (*StorageGateway) DescribeCachediSCSIVolumes

This operation returns a description of the gateway volumes specified in the request. This operation is supported only for the gateway-cached volume architecture.

The list of gateway volumes in the request must be from one gateway. In

the response Amazon Storage Gateway returns volume information sorted by volume Amazon Resource Name (ARN).

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.DescribeCachediSCSIVolumesInput{
		VolumeARNs: []*string{ // Required
			aws.String("VolumeARN"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeCachediSCSIVolumes(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) DescribeCachediSCSIVolumesRequest

func (c *StorageGateway) DescribeCachediSCSIVolumesRequest(input *DescribeCachediSCSIVolumesInput) (req *request.Request, output *DescribeCachediSCSIVolumesOutput)

DescribeCachediSCSIVolumesRequest generates a request for the DescribeCachediSCSIVolumes operation.

func (*StorageGateway) DescribeChapCredentials

func (c *StorageGateway) DescribeChapCredentials(input *DescribeChapCredentialsInput) (*DescribeChapCredentialsOutput, error)

This operation returns an array of Challenge-Handshake Authentication Protocol (CHAP) credentials information for a specified iSCSI target, one for each target-initiator pair.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.DescribeChapCredentialsInput{
		TargetARN: aws.String("TargetARN"), // Required
	}
	resp, err := svc.DescribeChapCredentials(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) DescribeChapCredentialsRequest

func (c *StorageGateway) DescribeChapCredentialsRequest(input *DescribeChapCredentialsInput) (req *request.Request, output *DescribeChapCredentialsOutput)

DescribeChapCredentialsRequest generates a request for the DescribeChapCredentials operation.

func (*StorageGateway) DescribeGatewayInformation

This operation returns metadata about a gateway such as its name, network interfaces, configured time zone, and the state (whether the gateway is running or not). To specify which gateway to describe, use the Amazon Resource Name (ARN) of the gateway in your request.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.DescribeGatewayInformationInput{
		GatewayARN: aws.String("GatewayARN"), // Required
	}
	resp, err := svc.DescribeGatewayInformation(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) DescribeGatewayInformationRequest

func (c *StorageGateway) DescribeGatewayInformationRequest(input *DescribeGatewayInformationInput) (req *request.Request, output *DescribeGatewayInformationOutput)

DescribeGatewayInformationRequest generates a request for the DescribeGatewayInformation operation.

func (*StorageGateway) DescribeMaintenanceStartTime

This operation returns your gateway's weekly maintenance start time including the day and time of the week. Note that values are in terms of the gateway's time zone.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.DescribeMaintenanceStartTimeInput{
		GatewayARN: aws.String("GatewayARN"), // Required
	}
	resp, err := svc.DescribeMaintenanceStartTime(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) DescribeMaintenanceStartTimeRequest

func (c *StorageGateway) DescribeMaintenanceStartTimeRequest(input *DescribeMaintenanceStartTimeInput) (req *request.Request, output *DescribeMaintenanceStartTimeOutput)

DescribeMaintenanceStartTimeRequest generates a request for the DescribeMaintenanceStartTime operation.

func (*StorageGateway) DescribeSnapshotSchedule

func (c *StorageGateway) DescribeSnapshotSchedule(input *DescribeSnapshotScheduleInput) (*DescribeSnapshotScheduleOutput, error)

This operation describes the snapshot schedule for the specified gateway volume. The snapshot schedule information includes intervals at which snapshots are automatically initiated on the volume.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.DescribeSnapshotScheduleInput{
		VolumeARN: aws.String("VolumeARN"), // Required
	}
	resp, err := svc.DescribeSnapshotSchedule(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) DescribeSnapshotScheduleRequest

func (c *StorageGateway) DescribeSnapshotScheduleRequest(input *DescribeSnapshotScheduleInput) (req *request.Request, output *DescribeSnapshotScheduleOutput)

DescribeSnapshotScheduleRequest generates a request for the DescribeSnapshotSchedule operation.

func (*StorageGateway) DescribeStorediSCSIVolumes

This operation returns the description of the gateway volumes specified in the request. The list of gateway volumes in the request must be from one gateway. In the response Amazon Storage Gateway returns volume information sorted by volume ARNs.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.DescribeStorediSCSIVolumesInput{
		VolumeARNs: []*string{ // Required
			aws.String("VolumeARN"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeStorediSCSIVolumes(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) DescribeStorediSCSIVolumesRequest

func (c *StorageGateway) DescribeStorediSCSIVolumesRequest(input *DescribeStorediSCSIVolumesInput) (req *request.Request, output *DescribeStorediSCSIVolumesOutput)

DescribeStorediSCSIVolumesRequest generates a request for the DescribeStorediSCSIVolumes operation.

func (*StorageGateway) DescribeTapeArchives

func (c *StorageGateway) DescribeTapeArchives(input *DescribeTapeArchivesInput) (*DescribeTapeArchivesOutput, error)

Returns a description of specified virtual tapes in the virtual tape shelf (VTS).

If a specific TapeARN is not specified, AWS Storage Gateway returns a description of all virtual tapes found in the VTS associated with your account.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.DescribeTapeArchivesInput{
		Limit:  aws.Int64(1),
		Marker: aws.String("Marker"),
		TapeARNs: []*string{
			aws.String("TapeARN"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeTapeArchives(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) DescribeTapeArchivesPages

func (c *StorageGateway) DescribeTapeArchivesPages(input *DescribeTapeArchivesInput, fn func(p *DescribeTapeArchivesOutput, lastPage bool) (shouldContinue bool)) error

func (*StorageGateway) DescribeTapeArchivesRequest

func (c *StorageGateway) DescribeTapeArchivesRequest(input *DescribeTapeArchivesInput) (req *request.Request, output *DescribeTapeArchivesOutput)

DescribeTapeArchivesRequest generates a request for the DescribeTapeArchives operation.

func (*StorageGateway) DescribeTapeRecoveryPoints

Returns a list of virtual tape recovery points that are available for the specified gateway-VTL.

A recovery point is a point in time view of a virtual tape at which all the data on the virtual tape is consistent. If your gateway crashes, virtual tapes that have recovery points can be recovered to a new gateway.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.DescribeTapeRecoveryPointsInput{
		GatewayARN: aws.String("GatewayARN"), // Required
		Limit:      aws.Int64(1),
		Marker:     aws.String("Marker"),
	}
	resp, err := svc.DescribeTapeRecoveryPoints(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) DescribeTapeRecoveryPointsPages

func (c *StorageGateway) DescribeTapeRecoveryPointsPages(input *DescribeTapeRecoveryPointsInput, fn func(p *DescribeTapeRecoveryPointsOutput, lastPage bool) (shouldContinue bool)) error

func (*StorageGateway) DescribeTapeRecoveryPointsRequest

func (c *StorageGateway) DescribeTapeRecoveryPointsRequest(input *DescribeTapeRecoveryPointsInput) (req *request.Request, output *DescribeTapeRecoveryPointsOutput)

DescribeTapeRecoveryPointsRequest generates a request for the DescribeTapeRecoveryPoints operation.

func (*StorageGateway) DescribeTapes

func (c *StorageGateway) DescribeTapes(input *DescribeTapesInput) (*DescribeTapesOutput, error)

Returns a description of the specified Amazon Resource Name (ARN) of virtual tapes. If a TapeARN is not specified, returns a description of all virtual tapes associated with the specified gateway.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.DescribeTapesInput{
		GatewayARN: aws.String("GatewayARN"), // Required
		Limit:      aws.Int64(1),
		Marker:     aws.String("Marker"),
		TapeARNs: []*string{
			aws.String("TapeARN"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeTapes(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) DescribeTapesPages

func (c *StorageGateway) DescribeTapesPages(input *DescribeTapesInput, fn func(p *DescribeTapesOutput, lastPage bool) (shouldContinue bool)) error

func (*StorageGateway) DescribeTapesRequest

func (c *StorageGateway) DescribeTapesRequest(input *DescribeTapesInput) (req *request.Request, output *DescribeTapesOutput)

DescribeTapesRequest generates a request for the DescribeTapes operation.

func (*StorageGateway) DescribeUploadBuffer

func (c *StorageGateway) DescribeUploadBuffer(input *DescribeUploadBufferInput) (*DescribeUploadBufferOutput, error)

This operation returns information about the upload buffer of a gateway. This operation is supported for both the gateway-stored and gateway-cached volume architectures.

The response includes disk IDs that are configured as upload buffer space,

and it includes the amount of upload buffer space allocated and used.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.DescribeUploadBufferInput{
		GatewayARN: aws.String("GatewayARN"), // Required
	}
	resp, err := svc.DescribeUploadBuffer(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) DescribeUploadBufferRequest

func (c *StorageGateway) DescribeUploadBufferRequest(input *DescribeUploadBufferInput) (req *request.Request, output *DescribeUploadBufferOutput)

DescribeUploadBufferRequest generates a request for the DescribeUploadBuffer operation.

func (*StorageGateway) DescribeVTLDevices

func (c *StorageGateway) DescribeVTLDevices(input *DescribeVTLDevicesInput) (*DescribeVTLDevicesOutput, error)

Returns a description of virtual tape library (VTL) devices for the specified gateway. In the response, AWS Storage Gateway returns VTL device information.

The list of VTL devices must be from one gateway.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.DescribeVTLDevicesInput{
		GatewayARN: aws.String("GatewayARN"), // Required
		Limit:      aws.Int64(1),
		Marker:     aws.String("Marker"),
		VTLDeviceARNs: []*string{
			aws.String("VTLDeviceARN"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeVTLDevices(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) DescribeVTLDevicesPages

func (c *StorageGateway) DescribeVTLDevicesPages(input *DescribeVTLDevicesInput, fn func(p *DescribeVTLDevicesOutput, lastPage bool) (shouldContinue bool)) error

func (*StorageGateway) DescribeVTLDevicesRequest

func (c *StorageGateway) DescribeVTLDevicesRequest(input *DescribeVTLDevicesInput) (req *request.Request, output *DescribeVTLDevicesOutput)

DescribeVTLDevicesRequest generates a request for the DescribeVTLDevices operation.

func (*StorageGateway) DescribeWorkingStorage

func (c *StorageGateway) DescribeWorkingStorage(input *DescribeWorkingStorageInput) (*DescribeWorkingStorageOutput, error)

This operation returns information about the working storage of a gateway. This operation is supported only for the gateway-stored volume architecture. This operation is deprecated in cached-volumes API version (20120630). Use DescribeUploadBuffer instead.

Working storage is also referred to as upload buffer. You can also use the DescribeUploadBuffer operation to add upload buffer to a stored-volume gateway.

The response includes disk IDs that are configured as working storage, and it includes the amount of working storage allocated and used.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.DescribeWorkingStorageInput{
		GatewayARN: aws.String("GatewayARN"), // Required
	}
	resp, err := svc.DescribeWorkingStorage(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) DescribeWorkingStorageRequest

func (c *StorageGateway) DescribeWorkingStorageRequest(input *DescribeWorkingStorageInput) (req *request.Request, output *DescribeWorkingStorageOutput)

DescribeWorkingStorageRequest generates a request for the DescribeWorkingStorage operation.

func (*StorageGateway) DisableGateway

func (c *StorageGateway) DisableGateway(input *DisableGatewayInput) (*DisableGatewayOutput, error)

Disables a gateway when the gateway is no longer functioning. For example, if your gateway VM is damaged, you can disable the gateway so you can recover virtual tapes.

Use this operation for a gateway-VTL that is not reachable or not functioning.

Once a gateway is disabled it cannot be enabled.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.DisableGatewayInput{
		GatewayARN: aws.String("GatewayARN"), // Required
	}
	resp, err := svc.DisableGateway(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) DisableGatewayRequest

func (c *StorageGateway) DisableGatewayRequest(input *DisableGatewayInput) (req *request.Request, output *DisableGatewayOutput)

DisableGatewayRequest generates a request for the DisableGateway operation.

func (*StorageGateway) ListGateways

func (c *StorageGateway) ListGateways(input *ListGatewaysInput) (*ListGatewaysOutput, error)

This operation lists gateways owned by an AWS account in a region specified in the request. The returned list is ordered by gateway Amazon Resource Name (ARN).

By default, the operation returns a maximum of 100 gateways. This operation supports pagination that allows you to optionally reduce the number of gateways returned in a response.

If you have more gateways than are returned in a response-that is, the response returns only a truncated list of your gateways-the response contains a marker that you can specify in your next request to fetch the next page of gateways.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.ListGatewaysInput{
		Limit:  aws.Int64(1),
		Marker: aws.String("Marker"),
	}
	resp, err := svc.ListGateways(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) ListGatewaysPages

func (c *StorageGateway) ListGatewaysPages(input *ListGatewaysInput, fn func(p *ListGatewaysOutput, lastPage bool) (shouldContinue bool)) error

func (*StorageGateway) ListGatewaysRequest

func (c *StorageGateway) ListGatewaysRequest(input *ListGatewaysInput) (req *request.Request, output *ListGatewaysOutput)

ListGatewaysRequest generates a request for the ListGateways operation.

func (*StorageGateway) ListLocalDisks

func (c *StorageGateway) ListLocalDisks(input *ListLocalDisksInput) (*ListLocalDisksOutput, error)

This operation returns a list of the gateway's local disks. To specify which gateway to describe, you use the Amazon Resource Name (ARN) of the gateway in the body of the request.

The request returns a list of all disks, specifying which are configured as working storage, cache storage, or stored volume or not configured at all. The response includes a DiskStatus field. This field can have a value of present (the disk is available to use), missing (the disk is no longer connected to the gateway), or mismatch (the disk node is occupied by a disk that has incorrect metadata or the disk content is corrupted).

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.ListLocalDisksInput{
		GatewayARN: aws.String("GatewayARN"), // Required
	}
	resp, err := svc.ListLocalDisks(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) ListLocalDisksRequest

func (c *StorageGateway) ListLocalDisksRequest(input *ListLocalDisksInput) (req *request.Request, output *ListLocalDisksOutput)

ListLocalDisksRequest generates a request for the ListLocalDisks operation.

func (*StorageGateway) ListTagsForResource

func (c *StorageGateway) ListTagsForResource(input *ListTagsForResourceInput) (*ListTagsForResourceOutput, error)

This operation lists the tags that have been added to the specified resource.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.ListTagsForResourceInput{
		Limit:       aws.Int64(1),
		Marker:      aws.String("Marker"),
		ResourceARN: aws.String("ResourceARN"),
	}
	resp, err := svc.ListTagsForResource(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) ListTagsForResourceRequest

func (c *StorageGateway) ListTagsForResourceRequest(input *ListTagsForResourceInput) (req *request.Request, output *ListTagsForResourceOutput)

ListTagsForResourceRequest generates a request for the ListTagsForResource operation.

func (*StorageGateway) ListVolumeInitiators

func (c *StorageGateway) ListVolumeInitiators(input *ListVolumeInitiatorsInput) (*ListVolumeInitiatorsOutput, error)

This operation lists iSCSI initiators that are connected to a volume. You can use this operation to determine whether a volume is being used or not.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.ListVolumeInitiatorsInput{
		VolumeARN: aws.String("VolumeARN"), // Required
	}
	resp, err := svc.ListVolumeInitiators(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) ListVolumeInitiatorsRequest

func (c *StorageGateway) ListVolumeInitiatorsRequest(input *ListVolumeInitiatorsInput) (req *request.Request, output *ListVolumeInitiatorsOutput)

ListVolumeInitiatorsRequest generates a request for the ListVolumeInitiators operation.

func (*StorageGateway) ListVolumeRecoveryPoints

func (c *StorageGateway) ListVolumeRecoveryPoints(input *ListVolumeRecoveryPointsInput) (*ListVolumeRecoveryPointsOutput, error)

This operation lists the recovery points for a specified gateway. This operation is supported only for the gateway-cached volume architecture.

Each gateway-cached volume has one recovery point. A volume recovery point is a point in time at which all data of the volume is consistent and from which you can create a snapshot. To create a snapshot from a volume recovery point use the CreateSnapshotFromVolumeRecoveryPoint operation.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.ListVolumeRecoveryPointsInput{
		GatewayARN: aws.String("GatewayARN"), // Required
	}
	resp, err := svc.ListVolumeRecoveryPoints(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) ListVolumeRecoveryPointsRequest

func (c *StorageGateway) ListVolumeRecoveryPointsRequest(input *ListVolumeRecoveryPointsInput) (req *request.Request, output *ListVolumeRecoveryPointsOutput)

ListVolumeRecoveryPointsRequest generates a request for the ListVolumeRecoveryPoints operation.

func (*StorageGateway) ListVolumes

func (c *StorageGateway) ListVolumes(input *ListVolumesInput) (*ListVolumesOutput, error)

This operation lists the iSCSI stored volumes of a gateway. Results are sorted by volume ARN. The response includes only the volume ARNs. If you want additional volume information, use the DescribeStorediSCSIVolumes API.

The operation supports pagination. By default, the operation returns a maximum of up to 100 volumes. You can optionally specify the Limit field in the body to limit the number of volumes in the response. If the number of volumes returned in the response is truncated, the response includes a Marker field. You can use this Marker value in your subsequent request to retrieve the next set of volumes.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.ListVolumesInput{
		GatewayARN: aws.String("GatewayARN"), // Required
		Limit:      aws.Int64(1),
		Marker:     aws.String("Marker"),
	}
	resp, err := svc.ListVolumes(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) ListVolumesPages

func (c *StorageGateway) ListVolumesPages(input *ListVolumesInput, fn func(p *ListVolumesOutput, lastPage bool) (shouldContinue bool)) error

func (*StorageGateway) ListVolumesRequest

func (c *StorageGateway) ListVolumesRequest(input *ListVolumesInput) (req *request.Request, output *ListVolumesOutput)

ListVolumesRequest generates a request for the ListVolumes operation.

func (*StorageGateway) RemoveTagsFromResource

func (c *StorageGateway) RemoveTagsFromResource(input *RemoveTagsFromResourceInput) (*RemoveTagsFromResourceOutput, error)

This operation removes one or more tags from the specified resource.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.RemoveTagsFromResourceInput{
		ResourceARN: aws.String("ResourceARN"),
		TagKeys: []*string{
			aws.String("TagKey"), // Required
			// More values...
		},
	}
	resp, err := svc.RemoveTagsFromResource(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) RemoveTagsFromResourceRequest

func (c *StorageGateway) RemoveTagsFromResourceRequest(input *RemoveTagsFromResourceInput) (req *request.Request, output *RemoveTagsFromResourceOutput)

RemoveTagsFromResourceRequest generates a request for the RemoveTagsFromResource operation.

func (*StorageGateway) ResetCache

func (c *StorageGateway) ResetCache(input *ResetCacheInput) (*ResetCacheOutput, error)

This operation resets all cache disks that have encountered a error and makes the disks available for reconfiguration as cache storage. If your cache disk encounters a error, the gateway prevents read and write operations on virtual tapes in the gateway. For example, an error can occur when a disk is corrupted or removed from the gateway. When a cache is reset, the gateway loses its cache storage. At this point you can reconfigure the disks as cache disks.

If the cache disk you are resetting contains data that has not been uploaded

to Amazon S3 yet, that data can be lost. After you reset cache disks, there will be no configured cache disks left in the gateway, so you must configure at least one new cache disk for your gateway to function properly.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.ResetCacheInput{
		GatewayARN: aws.String("GatewayARN"), // Required
	}
	resp, err := svc.ResetCache(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) ResetCacheRequest

func (c *StorageGateway) ResetCacheRequest(input *ResetCacheInput) (req *request.Request, output *ResetCacheOutput)

ResetCacheRequest generates a request for the ResetCache operation.

func (*StorageGateway) RetrieveTapeArchive

func (c *StorageGateway) RetrieveTapeArchive(input *RetrieveTapeArchiveInput) (*RetrieveTapeArchiveOutput, error)

Retrieves an archived virtual tape from the virtual tape shelf (VTS) to a gateway-VTL. Virtual tapes archived in the VTS are not associated with any gateway. However after a tape is retrieved, it is associated with a gateway, even though it is also listed in the VTS.

Once a tape is successfully retrieved to a gateway, it cannot be retrieved again to another gateway. You must archive the tape again before you can retrieve it to another gateway.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.RetrieveTapeArchiveInput{
		GatewayARN: aws.String("GatewayARN"), // Required
		TapeARN:    aws.String("TapeARN"),    // Required
	}
	resp, err := svc.RetrieveTapeArchive(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) RetrieveTapeArchiveRequest

func (c *StorageGateway) RetrieveTapeArchiveRequest(input *RetrieveTapeArchiveInput) (req *request.Request, output *RetrieveTapeArchiveOutput)

RetrieveTapeArchiveRequest generates a request for the RetrieveTapeArchive operation.

func (*StorageGateway) RetrieveTapeRecoveryPoint

Retrieves the recovery point for the specified virtual tape.

A recovery point is a point in time view of a virtual tape at which all the data on the tape is consistent. If your gateway crashes, virtual tapes that have recovery points can be recovered to a new gateway.

The virtual tape can be retrieved to only one gateway. The retrieved tape is read-only. The virtual tape can be retrieved to only a gateway-VTL. There is no charge for retrieving recovery points.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.RetrieveTapeRecoveryPointInput{
		GatewayARN: aws.String("GatewayARN"), // Required
		TapeARN:    aws.String("TapeARN"),    // Required
	}
	resp, err := svc.RetrieveTapeRecoveryPoint(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) RetrieveTapeRecoveryPointRequest

func (c *StorageGateway) RetrieveTapeRecoveryPointRequest(input *RetrieveTapeRecoveryPointInput) (req *request.Request, output *RetrieveTapeRecoveryPointOutput)

RetrieveTapeRecoveryPointRequest generates a request for the RetrieveTapeRecoveryPoint operation.

func (*StorageGateway) ShutdownGateway

func (c *StorageGateway) ShutdownGateway(input *ShutdownGatewayInput) (*ShutdownGatewayOutput, error)

This operation shuts down a gateway. To specify which gateway to shut down, use the Amazon Resource Name (ARN) of the gateway in the body of your request.

The operation shuts down the gateway service component running in the storage gateway's virtual machine (VM) and not the VM.

If you want to shut down the VM, it is recommended that you first shut down the gateway component in the VM to avoid unpredictable conditions. After the gateway is shutdown, you cannot call any other API except StartGateway, DescribeGatewayInformation, and ListGateways. For more information, see ActivateGateway. Your applications cannot read from or write to the gateway's storage volumes, and there are no snapshots taken.

When you make a shutdown request, you will get a 200 OK success response immediately. However, it might take some time for the gateway to shut down. You can call the DescribeGatewayInformation API to check the status. For more information, see ActivateGateway. If do not intend to use the gateway again, you must delete the gateway (using DeleteGateway) to no longer pay software charges associated with the gateway.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.ShutdownGatewayInput{
		GatewayARN: aws.String("GatewayARN"), // Required
	}
	resp, err := svc.ShutdownGateway(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) ShutdownGatewayRequest

func (c *StorageGateway) ShutdownGatewayRequest(input *ShutdownGatewayInput) (req *request.Request, output *ShutdownGatewayOutput)

ShutdownGatewayRequest generates a request for the ShutdownGateway operation.

func (*StorageGateway) StartGateway

func (c *StorageGateway) StartGateway(input *StartGatewayInput) (*StartGatewayOutput, error)

This operation starts a gateway that you previously shut down (see ShutdownGateway). After the gateway starts, you can then make other API calls, your applications can read from or write to the gateway's storage volumes and you will be able to take snapshot backups.

When you make a request, you will get a 200 OK success response immediately. However, it might take some time for the gateway to be ready. You should call DescribeGatewayInformation and check the status before making any additional API calls. For more information, see ActivateGateway. To specify which gateway to start, use the Amazon Resource Name (ARN) of the gateway in your request.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.StartGatewayInput{
		GatewayARN: aws.String("GatewayARN"), // Required
	}
	resp, err := svc.StartGateway(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) StartGatewayRequest

func (c *StorageGateway) StartGatewayRequest(input *StartGatewayInput) (req *request.Request, output *StartGatewayOutput)

StartGatewayRequest generates a request for the StartGateway operation.

func (*StorageGateway) UpdateBandwidthRateLimit

func (c *StorageGateway) UpdateBandwidthRateLimit(input *UpdateBandwidthRateLimitInput) (*UpdateBandwidthRateLimitOutput, error)

This operation updates the bandwidth rate limits of a gateway. You can update both the upload and download bandwidth rate limit or specify only one of the two. If you don't set a bandwidth rate limit, the existing rate limit remains.

By default, a gateway's bandwidth rate limits are not set. If you don't set any limit, the gateway does not have any limitations on its bandwidth usage and could potentially use the maximum available bandwidth.

To specify which gateway to update, use the Amazon Resource Name (ARN) of the gateway in your request.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.UpdateBandwidthRateLimitInput{
		GatewayARN:                           aws.String("GatewayARN"), // Required
		AverageDownloadRateLimitInBitsPerSec: aws.Int64(1),
		AverageUploadRateLimitInBitsPerSec:   aws.Int64(1),
	}
	resp, err := svc.UpdateBandwidthRateLimit(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) UpdateBandwidthRateLimitRequest

func (c *StorageGateway) UpdateBandwidthRateLimitRequest(input *UpdateBandwidthRateLimitInput) (req *request.Request, output *UpdateBandwidthRateLimitOutput)

UpdateBandwidthRateLimitRequest generates a request for the UpdateBandwidthRateLimit operation.

func (*StorageGateway) UpdateChapCredentials

func (c *StorageGateway) UpdateChapCredentials(input *UpdateChapCredentialsInput) (*UpdateChapCredentialsOutput, error)

This operation updates the Challenge-Handshake Authentication Protocol (CHAP) credentials for a specified iSCSI target. By default, a gateway does not have CHAP enabled; however, for added security, you might use it.

When you update CHAP credentials, all existing connections on the target

are closed and initiators must reconnect with the new credentials.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.UpdateChapCredentialsInput{
		InitiatorName:                 aws.String("IqnName"),    // Required
		SecretToAuthenticateInitiator: aws.String("ChapSecret"), // Required
		TargetARN:                     aws.String("TargetARN"),  // Required
		SecretToAuthenticateTarget:    aws.String("ChapSecret"),
	}
	resp, err := svc.UpdateChapCredentials(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) UpdateChapCredentialsRequest

func (c *StorageGateway) UpdateChapCredentialsRequest(input *UpdateChapCredentialsInput) (req *request.Request, output *UpdateChapCredentialsOutput)

UpdateChapCredentialsRequest generates a request for the UpdateChapCredentials operation.

func (*StorageGateway) UpdateGatewayInformation

func (c *StorageGateway) UpdateGatewayInformation(input *UpdateGatewayInformationInput) (*UpdateGatewayInformationOutput, error)

This operation updates a gateway's metadata, which includes the gateway's name and time zone. To specify which gateway to update, use the Amazon Resource Name (ARN) of the gateway in your request.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.UpdateGatewayInformationInput{
		GatewayARN:      aws.String("GatewayARN"), // Required
		GatewayName:     aws.String("GatewayName"),
		GatewayTimezone: aws.String("GatewayTimezone"),
	}
	resp, err := svc.UpdateGatewayInformation(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) UpdateGatewayInformationRequest

func (c *StorageGateway) UpdateGatewayInformationRequest(input *UpdateGatewayInformationInput) (req *request.Request, output *UpdateGatewayInformationOutput)

UpdateGatewayInformationRequest generates a request for the UpdateGatewayInformation operation.

func (*StorageGateway) UpdateGatewaySoftwareNow

func (c *StorageGateway) UpdateGatewaySoftwareNow(input *UpdateGatewaySoftwareNowInput) (*UpdateGatewaySoftwareNowOutput, error)

This operation updates the gateway virtual machine (VM) software. The request immediately triggers the software update.

When you make this request, you get a 200 OK success response immediately. However, it might take some time for the update to complete. You can call DescribeGatewayInformation to verify the gateway is in the STATE_RUNNING state. A software update forces a system restart of your gateway. You can minimize the chance of any disruption to your applications by increasing your iSCSI Initiators' timeouts. For more information about increasing iSCSI Initiator timeouts for Windows and Linux, see Customizing Your Windows iSCSI Settings (http://docs.aws.amazon.com/storagegateway/latest/userguide/ConfiguringiSCSIClientInitiatorWindowsClient.html#CustomizeWindowsiSCSISettings) and Customizing Your Linux iSCSI Settings (http://docs.aws.amazon.com/storagegateway/latest/userguide/ConfiguringiSCSIClientInitiatorRedHatClient.html#CustomizeLinuxiSCSISettings), respectively.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.UpdateGatewaySoftwareNowInput{
		GatewayARN: aws.String("GatewayARN"), // Required
	}
	resp, err := svc.UpdateGatewaySoftwareNow(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) UpdateGatewaySoftwareNowRequest

func (c *StorageGateway) UpdateGatewaySoftwareNowRequest(input *UpdateGatewaySoftwareNowInput) (req *request.Request, output *UpdateGatewaySoftwareNowOutput)

UpdateGatewaySoftwareNowRequest generates a request for the UpdateGatewaySoftwareNow operation.

func (*StorageGateway) UpdateMaintenanceStartTime

This operation updates a gateway's weekly maintenance start time information, including day and time of the week. The maintenance time is the time in your gateway's time zone.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.UpdateMaintenanceStartTimeInput{
		DayOfWeek:    aws.Int64(1),             // Required
		GatewayARN:   aws.String("GatewayARN"), // Required
		HourOfDay:    aws.Int64(1),             // Required
		MinuteOfHour: aws.Int64(1),             // Required
	}
	resp, err := svc.UpdateMaintenanceStartTime(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) UpdateMaintenanceStartTimeRequest

func (c *StorageGateway) UpdateMaintenanceStartTimeRequest(input *UpdateMaintenanceStartTimeInput) (req *request.Request, output *UpdateMaintenanceStartTimeOutput)

UpdateMaintenanceStartTimeRequest generates a request for the UpdateMaintenanceStartTime operation.

func (*StorageGateway) UpdateSnapshotSchedule

func (c *StorageGateway) UpdateSnapshotSchedule(input *UpdateSnapshotScheduleInput) (*UpdateSnapshotScheduleOutput, error)

This operation updates a snapshot schedule configured for a gateway volume.

The default snapshot schedule for volume is once every 24 hours, starting at the creation time of the volume. You can use this API to change the snapshot schedule configured for the volume.

In the request you must identify the gateway volume whose snapshot schedule you want to update, and the schedule information, including when you want the snapshot to begin on a day and the frequency (in hours) of snapshots.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.UpdateSnapshotScheduleInput{
		RecurrenceInHours: aws.Int64(1),            // Required
		StartAt:           aws.Int64(1),            // Required
		VolumeARN:         aws.String("VolumeARN"), // Required
		Description:       aws.String("Description"),
	}
	resp, err := svc.UpdateSnapshotSchedule(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) UpdateSnapshotScheduleRequest

func (c *StorageGateway) UpdateSnapshotScheduleRequest(input *UpdateSnapshotScheduleInput) (req *request.Request, output *UpdateSnapshotScheduleOutput)

UpdateSnapshotScheduleRequest generates a request for the UpdateSnapshotSchedule operation.

func (*StorageGateway) UpdateVTLDeviceType

func (c *StorageGateway) UpdateVTLDeviceType(input *UpdateVTLDeviceTypeInput) (*UpdateVTLDeviceTypeOutput, error)

This operation updates the type of medium changer in a gateway-VTL. When you activate a gateway-VTL, you select a medium changer type for the gateway-VTL. This operation enables you to select a different type of medium changer after a gateway-VTL is activated.

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/storagegateway"
)

func main() {
	svc := storagegateway.New(session.New())

	params := &storagegateway.UpdateVTLDeviceTypeInput{
		DeviceType:   aws.String("DeviceType"),   // Required
		VTLDeviceARN: aws.String("VTLDeviceARN"), // Required
	}
	resp, err := svc.UpdateVTLDeviceType(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*StorageGateway) UpdateVTLDeviceTypeRequest

func (c *StorageGateway) UpdateVTLDeviceTypeRequest(input *UpdateVTLDeviceTypeInput) (req *request.Request, output *UpdateVTLDeviceTypeOutput)

UpdateVTLDeviceTypeRequest generates a request for the UpdateVTLDeviceType operation.

type StorediSCSIVolume

type StorediSCSIVolume struct {
	PreservedExistingData *bool `type:"boolean"`

	SourceSnapshotId *string `type:"string"`

	VolumeARN *string `min:"50" type:"string"`

	VolumeDiskId *string `min:"1" type:"string"`

	VolumeId *string `min:"12" type:"string"`

	VolumeProgress *float64 `type:"double"`

	VolumeSizeInBytes *int64 `type:"long"`

	VolumeStatus *string `min:"3" type:"string"`

	VolumeType *string `min:"3" type:"string"`

	// Lists iSCSI information about a volume.
	VolumeiSCSIAttributes *VolumeiSCSIAttributes `type:"structure"`
	// contains filtered or unexported fields
}

func (StorediSCSIVolume) GoString

func (s StorediSCSIVolume) GoString() string

GoString returns the string representation

func (StorediSCSIVolume) String

func (s StorediSCSIVolume) String() string

String returns the string representation

type Tag

type Tag struct {
	Key *string `min:"1" type:"string" required:"true"`

	Value *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

func (Tag) GoString

func (s Tag) GoString() string

GoString returns the string representation

func (Tag) String

func (s Tag) String() string

String returns the string representation

type Tape

type Tape struct {
	// For archiving virtual tapes, indicates how much data remains to be uploaded
	// before archiving is complete.
	//
	// Range: 0 (not started) to 100 (complete).
	Progress *float64 `type:"double"`

	// The Amazon Resource Name (ARN) of the virtual tape.
	TapeARN *string `min:"50" type:"string"`

	// The barcode that identifies a specific virtual tape.
	TapeBarcode *string `min:"7" type:"string"`

	// The size, in bytes, of the virtual tape.
	TapeSizeInBytes *int64 `type:"long"`

	// The current state of the virtual tape.
	TapeStatus *string `type:"string"`

	// The virtual tape library (VTL) device that the virtual tape is associated
	// with.
	VTLDevice *string `min:"50" type:"string"`
	// contains filtered or unexported fields
}

Describes a virtual tape object.

func (Tape) GoString

func (s Tape) GoString() string

GoString returns the string representation

func (Tape) String

func (s Tape) String() string

String returns the string representation

type TapeArchive

type TapeArchive struct {
	// The time that the archiving of the virtual tape was completed.
	//
	// The string format of the completion time is in the ISO8601 extended YYYY-MM-DD'T'HH:MM:SS'Z'
	// format.
	CompletionTime *time.Time `type:"timestamp" timestampFormat:"unix"`

	// The Amazon Resource Name (ARN) of the gateway-VTL that the virtual tape is
	// being retrieved to.
	//
	// The virtual tape is retrieved from the virtual tape shelf (VTS).
	RetrievedTo *string `min:"50" type:"string"`

	// The Amazon Resource Name (ARN) of an archived virtual tape.
	TapeARN *string `min:"50" type:"string"`

	// The barcode that identifies the archived virtual tape.
	TapeBarcode *string `min:"7" type:"string"`

	// The size, in bytes, of the archived virtual tape.
	TapeSizeInBytes *int64 `type:"long"`

	// The current state of the archived virtual tape.
	TapeStatus *string `type:"string"`
	// contains filtered or unexported fields
}

Represents a virtual tape that is archived in the virtual tape shelf (VTS).

func (TapeArchive) GoString

func (s TapeArchive) GoString() string

GoString returns the string representation

func (TapeArchive) String

func (s TapeArchive) String() string

String returns the string representation

type TapeRecoveryPointInfo

type TapeRecoveryPointInfo struct {
	// The Amazon Resource Name (ARN) of the virtual tape.
	TapeARN *string `min:"50" type:"string"`

	// The time when the point-in-time view of the virtual tape was replicated for
	// later recovery.
	//
	// The string format of the tape recovery point time is in the ISO8601 extended
	// YYYY-MM-DD'T'HH:MM:SS'Z' format.
	TapeRecoveryPointTime *time.Time `type:"timestamp" timestampFormat:"unix"`

	// The size, in bytes, of the virtual tapes to recover.
	TapeSizeInBytes *int64 `type:"long"`

	TapeStatus *string `type:"string"`
	// contains filtered or unexported fields
}

Describes a recovery point.

func (TapeRecoveryPointInfo) GoString

func (s TapeRecoveryPointInfo) GoString() string

GoString returns the string representation

func (TapeRecoveryPointInfo) String

func (s TapeRecoveryPointInfo) String() string

String returns the string representation

type UpdateBandwidthRateLimitInput

type UpdateBandwidthRateLimitInput struct {
	// The average download bandwidth rate limit in bits per second.
	AverageDownloadRateLimitInBitsPerSec *int64 `min:"102400" type:"long"`

	// The average upload bandwidth rate limit in bits per second.
	AverageUploadRateLimitInBitsPerSec *int64 `min:"51200" type:"long"`

	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A JSON object containing one or more of the following fields:

UpdateBandwidthRateLimitInput$AverageDownloadRateLimitInBitsPerSec   UpdateBandwidthRateLimitInput$AverageUploadRateLimitInBitsPerSec

func (UpdateBandwidthRateLimitInput) GoString

GoString returns the string representation

func (UpdateBandwidthRateLimitInput) String

String returns the string representation

type UpdateBandwidthRateLimitOutput

type UpdateBandwidthRateLimitOutput struct {
	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string"`
	// contains filtered or unexported fields
}

A JSON object containing the of the gateway whose throttle information was updated.

func (UpdateBandwidthRateLimitOutput) GoString

GoString returns the string representation

func (UpdateBandwidthRateLimitOutput) String

String returns the string representation

type UpdateChapCredentialsInput

type UpdateChapCredentialsInput struct {
	// The iSCSI initiator that connects to the target.
	InitiatorName *string `min:"1" type:"string" required:"true"`

	// The secret key that the initiator (for example, the Windows client) must
	// provide to participate in mutual CHAP with the target.
	//
	// The secret key must be between 12 and 16 bytes when encoded in UTF-8.
	SecretToAuthenticateInitiator *string `min:"1" type:"string" required:"true"`

	// The secret key that the target must provide to participate in mutual CHAP
	// with the initiator (e.g. Windows client).
	//
	// Byte constraints: Minimum bytes of 12. Maximum bytes of 16.
	//
	// The secret key must be between 12 and 16 bytes when encoded in UTF-8.
	SecretToAuthenticateTarget *string `min:"1" type:"string"`

	// The Amazon Resource Name (ARN) of the iSCSI volume target. Use the DescribeStorediSCSIVolumes
	// operation to return the TargetARN for specified VolumeARN.
	TargetARN *string `min:"50" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A JSON object containing one or more of the following fields:

UpdateChapCredentialsInput$InitiatorName   UpdateChapCredentialsInput$SecretToAuthenticateInitiator
UpdateChapCredentialsInput$SecretToAuthenticateTarget   UpdateChapCredentialsInput$TargetARN

func (UpdateChapCredentialsInput) GoString

func (s UpdateChapCredentialsInput) GoString() string

GoString returns the string representation

func (UpdateChapCredentialsInput) String

String returns the string representation

type UpdateChapCredentialsOutput

type UpdateChapCredentialsOutput struct {
	// The iSCSI initiator that connects to the target. This is the same initiator
	// name specified in the request.
	InitiatorName *string `min:"1" type:"string"`

	// The Amazon Resource Name (ARN) of the target. This is the same target specified
	// in the request.
	TargetARN *string `min:"50" type:"string"`
	// contains filtered or unexported fields
}

A JSON object containing the following fields:

func (UpdateChapCredentialsOutput) GoString

func (s UpdateChapCredentialsOutput) GoString() string

GoString returns the string representation

func (UpdateChapCredentialsOutput) String

String returns the string representation

type UpdateGatewayInformationInput

type UpdateGatewayInformationInput struct {
	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string" required:"true"`

	// A unique identifier for your gateway. This name becomes part of the gateway
	// Amazon Resources Name (ARN) which is what you use as an input to other operations.
	GatewayName *string `min:"2" type:"string"`

	GatewayTimezone *string `min:"3" type:"string"`
	// contains filtered or unexported fields
}

func (UpdateGatewayInformationInput) GoString

GoString returns the string representation

func (UpdateGatewayInformationInput) String

String returns the string representation

type UpdateGatewayInformationOutput

type UpdateGatewayInformationOutput struct {
	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string"`

	GatewayName *string `type:"string"`
	// contains filtered or unexported fields
}

A JSON object containing the of the gateway that was updated.

func (UpdateGatewayInformationOutput) GoString

GoString returns the string representation

func (UpdateGatewayInformationOutput) String

String returns the string representation

type UpdateGatewaySoftwareNowInput

type UpdateGatewaySoftwareNowInput struct {
	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A JSON object containing the of the gateway to update.

func (UpdateGatewaySoftwareNowInput) GoString

GoString returns the string representation

func (UpdateGatewaySoftwareNowInput) String

String returns the string representation

type UpdateGatewaySoftwareNowOutput

type UpdateGatewaySoftwareNowOutput struct {
	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string"`
	// contains filtered or unexported fields
}

A JSON object containing the of the gateway that was updated.

func (UpdateGatewaySoftwareNowOutput) GoString

GoString returns the string representation

func (UpdateGatewaySoftwareNowOutput) String

String returns the string representation

type UpdateMaintenanceStartTimeInput

type UpdateMaintenanceStartTimeInput struct {
	// The maintenance start time day of the week.
	DayOfWeek *int64 `type:"integer" required:"true"`

	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string" required:"true"`

	// The hour component of the maintenance start time represented as hh, where
	// hh is the hour (00 to 23). The hour of the day is in the time zone of the
	// gateway.
	HourOfDay *int64 `type:"integer" required:"true"`

	// The minute component of the maintenance start time represented as mm, where
	// mm is the minute (00 to 59). The minute of the hour is in the time zone of
	// the gateway.
	MinuteOfHour *int64 `type:"integer" required:"true"`
	// contains filtered or unexported fields
}

A JSON object containing the following fields:

UpdateMaintenanceStartTimeInput$DayOfWeek   UpdateMaintenanceStartTimeInput$HourOfDay
UpdateMaintenanceStartTimeInput$MinuteOfHour

func (UpdateMaintenanceStartTimeInput) GoString

GoString returns the string representation

func (UpdateMaintenanceStartTimeInput) String

String returns the string representation

type UpdateMaintenanceStartTimeOutput

type UpdateMaintenanceStartTimeOutput struct {
	// The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation
	// to return a list of gateways for your account and region.
	GatewayARN *string `min:"50" type:"string"`
	// contains filtered or unexported fields
}

A JSON object containing the of the gateway whose maintenance start time is updated.

func (UpdateMaintenanceStartTimeOutput) GoString

GoString returns the string representation

func (UpdateMaintenanceStartTimeOutput) String

String returns the string representation

type UpdateSnapshotScheduleInput

type UpdateSnapshotScheduleInput struct {
	// Optional description of the snapshot that overwrites the existing description.
	Description *string `min:"1" type:"string"`

	// Frequency of snapshots. Specify the number of hours between snapshots.
	RecurrenceInHours *int64 `min:"1" type:"integer" required:"true"`

	// The hour of the day at which the snapshot schedule begins represented as
	// hh, where hh is the hour (0 to 23). The hour of the day is in the time zone
	// of the gateway.
	StartAt *int64 `type:"integer" required:"true"`

	// The Amazon Resource Name (ARN) of the volume. Use the ListVolumes operation
	// to return a list of gateway volumes.
	VolumeARN *string `min:"50" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A JSON object containing one or more of the following fields:

UpdateSnapshotScheduleInput$Description   UpdateSnapshotScheduleInput$RecurrenceInHours
UpdateSnapshotScheduleInput$StartAt   UpdateSnapshotScheduleInput$VolumeARN

func (UpdateSnapshotScheduleInput) GoString

func (s UpdateSnapshotScheduleInput) GoString() string

GoString returns the string representation

func (UpdateSnapshotScheduleInput) String

String returns the string representation

type UpdateSnapshotScheduleOutput

type UpdateSnapshotScheduleOutput struct {
	VolumeARN *string `min:"50" type:"string"`
	// contains filtered or unexported fields
}

A JSON object containing the of the updated storage volume.

func (UpdateSnapshotScheduleOutput) GoString

func (s UpdateSnapshotScheduleOutput) GoString() string

GoString returns the string representation

func (UpdateSnapshotScheduleOutput) String

String returns the string representation

type UpdateVTLDeviceTypeInput

type UpdateVTLDeviceTypeInput struct {
	// The type of medium changer you want to select.
	//
	// Valid Values: "STK-L700", "AWS-Gateway-VTL"
	DeviceType *string `min:"2" type:"string" required:"true"`

	// The Amazon Resource Name (ARN) of the medium changer you want to select.
	VTLDeviceARN *string `min:"50" type:"string" required:"true"`
	// contains filtered or unexported fields
}

UpdateVTLDeviceTypeInput

func (UpdateVTLDeviceTypeInput) GoString

func (s UpdateVTLDeviceTypeInput) GoString() string

GoString returns the string representation

func (UpdateVTLDeviceTypeInput) String

func (s UpdateVTLDeviceTypeInput) String() string

String returns the string representation

type UpdateVTLDeviceTypeOutput

type UpdateVTLDeviceTypeOutput struct {
	// The Amazon Resource Name (ARN) of the medium changer you have selected.
	VTLDeviceARN *string `min:"50" type:"string"`
	// contains filtered or unexported fields
}

UpdateVTLDeviceTypeOutput

func (UpdateVTLDeviceTypeOutput) GoString

func (s UpdateVTLDeviceTypeOutput) GoString() string

GoString returns the string representation

func (UpdateVTLDeviceTypeOutput) String

func (s UpdateVTLDeviceTypeOutput) String() string

String returns the string representation

type VTLDevice

type VTLDevice struct {
	// A list of iSCSI information about a VTL device.
	DeviceiSCSIAttributes *DeviceiSCSIAttributes `type:"structure"`

	// Specifies the unique Amazon Resource Name (ARN) of the device (tape drive
	// or media changer).
	VTLDeviceARN *string `min:"50" type:"string"`

	VTLDeviceProductIdentifier *string `type:"string"`

	VTLDeviceType *string `type:"string"`

	VTLDeviceVendor *string `type:"string"`
	// contains filtered or unexported fields
}

Represents a device object associated with a gateway-VTL.

func (VTLDevice) GoString

func (s VTLDevice) GoString() string

GoString returns the string representation

func (VTLDevice) String

func (s VTLDevice) String() string

String returns the string representation

type VolumeInfo

type VolumeInfo struct {
	VolumeARN *string `min:"50" type:"string"`

	VolumeType *string `min:"3" type:"string"`
	// contains filtered or unexported fields
}

func (VolumeInfo) GoString

func (s VolumeInfo) GoString() string

GoString returns the string representation

func (VolumeInfo) String

func (s VolumeInfo) String() string

String returns the string representation

type VolumeRecoveryPointInfo

type VolumeRecoveryPointInfo struct {
	VolumeARN *string `min:"50" type:"string"`

	VolumeRecoveryPointTime *string `type:"string"`

	VolumeSizeInBytes *int64 `type:"long"`

	VolumeUsageInBytes *int64 `type:"long"`
	// contains filtered or unexported fields
}

func (VolumeRecoveryPointInfo) GoString

func (s VolumeRecoveryPointInfo) GoString() string

GoString returns the string representation

func (VolumeRecoveryPointInfo) String

func (s VolumeRecoveryPointInfo) String() string

String returns the string representation

type VolumeiSCSIAttributes

type VolumeiSCSIAttributes struct {
	// Indicates whether mutual CHAP is enabled for the iSCSI target.
	ChapEnabled *bool `type:"boolean"`

	// The logical disk number.
	LunNumber *int64 `min:"1" type:"integer"`

	// The network interface identifier.
	NetworkInterfaceId *string `type:"string"`

	// The port used to communicate with iSCSI targets.
	NetworkInterfacePort *int64 `type:"integer"`

	// The Amazon Resource Name (ARN) of the volume target.
	TargetARN *string `min:"50" type:"string"`
	// contains filtered or unexported fields
}

Lists iSCSI information about a volume.

func (VolumeiSCSIAttributes) GoString

func (s VolumeiSCSIAttributes) GoString() string

GoString returns the string representation

func (VolumeiSCSIAttributes) String

func (s VolumeiSCSIAttributes) String() string

String returns the string representation

Directories

Path Synopsis
Package storagegatewayiface provides an interface for the AWS Storage Gateway.
Package storagegatewayiface provides an interface for the AWS Storage Gateway.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL