kubetest

command
v0.0.0-...-ce3d181 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Jan 8, 2019 License: Apache-2.0 Imports: 49 Imported by: 0

README

Kubetest

Kubetest is the interface for launching and running e2e tests.

See the contributor documentation for information about e2e testing.

Kubetest sits between bootstrap.py and various parts of the e2e lifecycle.

The bootstrap.py library is a nominal/optional part of prow. This library is responsible for:

  • checking out each repository correctly
  • starting kubetest (or whatever the test binary is for other jobs)
  • uploading the test result (including artifacts) to gcs

The e2e lifecycle may:

  • --build kubernetes,
  • --stage this build to gcs,
  • --extract a staged build from gcs,
  • turn --up a new cluster using various --deployment strategies,
  • --test this cluster using ginkgo --test_args
  • --dump logs to a local folder, and finally
  • turn --down the cluster after completing testing,
  • --timeout after a particular duration (allowing extra time to clean up).

Note that developers frequently use kubetest by calling go run hack/e2e.go in the kubernetes/kubernetes repository. This hack/e2e.go program is a wrapper around updating kubetest (at most once a day) before calling it.

If you're making a change to kubetest, watch the canary jobs after it has merged; these run the latest images of kubekins-e2e, and thus don't have to wait for a version bump in the prow config. The canary jobs are used to give early signal on whether new kubetest features are working as intended, before bumping the image for general e2e tests.

Installation

Please run go get -u k8s.io/test-infra/kubetest to install kubetest.

Common alternatives:

go run hack/e2e.go  # from kubernetes/kubernetes
go install k8s.io/test-infra/kubetest  # if you check out test-infra
bazel run //kubetest  # use bazel to build and run
Releases

Right now kubetest is expected to run at head, regardless of the version of kubernetes being targeted.

Most e2e images, such as kubekins-e2e and kubekins-e2e-prow compile the latest version of kubetest whenever the image is updated (most updates to these images are done in order to update kubetest).

Build

If PWD is in the kubernetes/kubernetes directory --build will build whatever changes you have made into a quick release.

Control the details of the --build=bazel by appending one of the build modes (see help for current list).

Stage a build

It is inefficient for every job to rebuild the same version. Instead our CI system defines build jobs which --stage the build somewhere on GCS. Some providers such as GKE require a staged build, whereas others like GCE allow you to scp over the binaries directly to each node.

Extract a build

Aside from the build jobs, most of our CI systems --extract a prebuilt version. This saves a bunch of time compiling.

The most common options are either a specific version--extract=v1.7.0-beta.1, a release --extract=release/stable or --extract=ci/latest-1.8.

Note that you can extract 1 or 2 versions. Using 2 versions is useful for skew and upgrade testing.

See extract_k8s.go for further details.

Cluster-lifecycle

There are various ways to deploy kubernetes. Choose a strategy with the --deployment flag (for example --deployment=kops or --deployment=kubernetes-anywhere). See kubetest --help for a full list of options.

Up

The --up flag will tell kubetest to turn up a new cluster for you.

It will first attempt to tear down an old instance of the same cluster.

Currently requires a complicated set of flags and environment variables such as --gcp-project, --federation, etc.

We are in the process of converting all environment variables into flags. See the current set of flag options with kubetest -h.

Save/load credentials

The --save flag tells kubetest to upload your cluster credentials onto gcs somewhere. Later calling kubetest --save without an --up flag tells kubetest to load these credentials instead of turning up a new cluster.

Dynamic project selection

Most e2e jobs assume control of a GCP project (see leaks section below).

If kubetest is running inside a pod then it will attempt to talk to boskos to dynamically reserve a project.

This makes it easier for developers to add and remove jobs. With boskos they no longer need to worry about creating, provisioning, naming, etc a project for this new job.

See the boskos docs for more details.

Dump logs

The --dump flag tells kubetest to try and collect logs if there is a problem. Typically this means master and node logs.

Collecting these logs may take a long time. This typically involves sshing to each node, searching for and downloading any relevant logs.

There is also a --logexporter-gcs-path option which tells kubetest to run a container on each node which uploads logs directly to GCS. This dramatically reduces time required to dump logs, especially for scalability tests.

Down

The --down flag tells kubetest to clear up the cluster after finishing.

Kubetest will try its best to tear down the cluster in spite of problems such as failing --up, --test, etc. The --timeout also includes some buffer to allow time for --down to clean up.

Leaks

The --check-leaked-resources option tells kubetest to look for any extra GCP resources after tearing down the cluster.

The expectation is that any resources created by kubernetes will be cleaned up during cluster teardown.

This logic may be buggy so this options takes a snapshot of the resources at various points in time (start, after cluster up, after testing, after cluster down) and ensures that there are no resources present after down that weren't already present at the start.

Testing

Most testing uses ginkgo but there are other options available.

Ginkgo

The --test flag tells kubetest to run the test.e2e binary built/extracted from the kubernetes/kubernetes repo.

Typically jobs also include a --test_args=--ginkgo.focus=FOO --ginkgo.skip=BAR flag to filter down to a particular set of interesting tests.

Upgrade, skew, kubemark, federation

You can also run --kubemark or --federation tests instead of the standard tests.

Tests can use --skew and --upgrade_args if they provided multiple --extract flags (or manually created a kubernetes/kubernetes_skew directory as a sibling to kubernetes/kubernetes). This will cause tests to run from the skew directory, potentially to upgrade/downgrade kubernetes to another version.

A simple example is:
kubetest --up --check-version-skew=false --extract=v1.8.0-beta.1 --extract=v1.7.5 --upgrade_args=--ginkgo.focus="Feature:SomeUpgrade" --gcp-project=google.com:some-project

The command runs all (and only) upgrade tests tagged with Feature:SomeUpgrade label on GCE. The command downloads v1.7.5 and v1.8.0-beta.1 releases, unzips downloaded files, and runs the tests to upgrade the cluster from v1.7.5 to v1.8.0-beta.1. You will be able to find 2 new directories named kubernetes and kubernetes_skew at current directory. kubernetes is the directory corresponding to release indicated by first --extract flag, while kubernetes_skew corresponds to second flag.

Note that order of the 2 --extract flags matters: --extract=v2 --extract=v1 means upgrading from v1 to v2. The command does not run other e2e tests after completing the upgrade tests. If you want to run the e2e tests, specify also --test and --test_args flags.

Tips: CI upgrade tests listed at sig-cluster-lifecycle config show flags used in the real CI test environment, which is a good source to learn more about how the flags are used.

Staging

If you want to create a new release with your own changes, you have to upload built manifests to gcs. The command is very similar: kubetest --build --stage=gs://some/path/to/v1.8.0-beta.1 --check-version-skew=false --extract=gs://some/path/to/v1.8.0-beta.1 --extract=v1.7.5 --upgrade_args=--ginkgo.focus="Feature:SomeUpgrade" --gcp-project=google.com:some-project

If you already have release of a specific version, you do not need to fetch the release again. For instance, if you have v1.7.5 release and its directory is at the right path, the command below does the same as above: kubetest --build --stage=gs://some/path/to/v1.8.0-beta.1 --check-version-skew=false --extract=gs://some/path/to/v1.8.0-beta.1 --upgrade_args=--ginkgo.focus="Feature:SomeUpgrade" --gcp-project=google.com:some-project

Documentation

Overview

Package main / eks.go implements kubetest deployer interface for EKS. It uses 'aws-k8s-tester' and 'kubectl' binaries, rather than importing internal packages. All underlying implementation and external dependencies are compiled into one binary.

Package main / gke.go provides the Google Container Engine (GKE) kubetest deployer via newGKE().

TODO(zmerlynn): Pull this out to a separate package?

Directories

Path Synopsis
Package conformance implements conformance test kubetest code.
Package conformance implements conformance test kubetest code.
Package kubeadmdind implements a kubetest deployer based on the scripts in the github.com/kubernetes-sigs/kubeadm-dind-cluster repo.
Package kubeadmdind implements a kubetest deployer based on the scripts in the github.com/kubernetes-sigs/kubeadm-dind-cluster repo.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL