snapshots

package
v0.0.0-...-a315113 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Jun 20, 2022 License: Apache-2.0 Imports: 18 Imported by: 0

README

State Sync Snapshotting

The snapshots package implements automatic support for Tendermint state sync in Cosmos SDK-based applications. State sync allows a new node joining a network to simply fetch a recent snapshot of the application state instead of fetching and applying all historical blocks. This can reduce the time needed to join the network by several orders of magnitude (e.g. weeks to minutes), but the node will not contain historical data from previous heights.

This document describes the Cosmos SDK implementation of the ABCI state sync interface, for more information on Tendermint state sync in general see:

Overview

For an overview of how Cosmos SDK state sync is set up and configured by developers and end-users, see the Cosmos SDK State Sync Guide.

Briefly, the Cosmos SDK takes state snapshots at regular height intervals given by state-sync.snapshot-interval and stores them as binary files in the filesystem under <node_home>/data/snapshots/, with metadata in a LevelDB database <node_home>/data/snapshots/metadata.db. The number of recent snapshots to keep are given by state-sync.snapshot-keep-recent.

Snapshots are taken asynchronously, i.e. new blocks will be applied concurrently with snapshots being taken. This is possible because IAVL supports querying immutable historical heights.

When a remote node is state syncing, Tendermint calls the ABCI method ListSnapshots to list available local snapshots and LoadSnapshotChunk to load a binary snapshot chunk. When the local node is being state synced, Tendermint calls OfferSnapshot to offer a discovered remote snapshot to the local application and ApplySnapshotChunk to apply a binary snapshot chunk to the local application. See the resources linked above for more details on these methods and how Tendermint performs state sync.

The Cosmos SDK does not currently do any incremental verification of snapshots during restoration, i.e. only after the entire snapshot has been restored will Tendermint compare the app hash against the trusted hash from the chain. Cosmos SDK snapshots and chunks do contain hashes as checksums to guard against IO corruption and non-determinism, but these are not tied to the chain state and can be trivially forged by an adversary. This was considered out of scope for the initial implementation, but can be added later without changes to the ABCI state sync protocol.

Snapshot Metadata

The ABCI Protobuf type for a snapshot is listed below (refer to the ABCI spec for field details):

message Snapshot {
  uint64 height   = 1;  // The height at which the snapshot was taken
  uint32 format   = 2;  // The application-specific snapshot format
  uint32 chunks   = 3;  // Number of chunks in the snapshot
  bytes  hash     = 4;  // Arbitrary snapshot hash, equal only if identical
  bytes  metadata = 5;  // Arbitrary application metadata
}

Because the metadata field is application-specific, the Cosmos SDK uses a similar type cosmos.base.snapshots.v1beta1.Snapshot with its own metadata representation:

// Snapshot contains Tendermint state sync snapshot info.
message Snapshot {
  uint64   height   = 1;
  uint32   format   = 2;
  uint32   chunks   = 3;
  bytes    hash     = 4;
  Metadata metadata = 5 [(gogoproto.nullable) = false];
}

// Metadata contains SDK-specific snapshot metadata.
message Metadata {
  repeated bytes chunk_hashes = 1; // SHA-256 chunk hashes
}

The format is currently 1, defined in snapshots.types.CurrentFormat. This must be increased whenever the binary snapshot format changes, and it may be useful to support past formats in newer versions.

The hash is a SHA-256 hash of the entire binary snapshot, used to guard against IO corruption and non-determinism across nodes. Note that this is not tied to the chain state, and can be trivially forged (but Tendermint will always compare the final app hash against the chain app hash). Similarly, the chunk_hashes are SHA-256 checksums of each binary chunk.

The metadata field is Protobuf-serialized before it is placed into the ABCI snapshot.

Snapshot Format

The current version 1 snapshot format is a zlib-compressed, length-prefixed Protobuf stream of cosmos.base.store.v1beta1.SnapshotItem messages, split into chunks at exact 10 MB byte boundaries.

// SnapshotItem is an item contained in a rootmulti.Store snapshot.
message SnapshotItem {
  // item is the specific type of snapshot item.
  oneof item {
    SnapshotStoreItem store = 1;
    SnapshotIAVLItem  iavl  = 2 [(gogoproto.customname) = "IAVL"];
  }
}

// SnapshotStoreItem contains metadata about a snapshotted store.
message SnapshotStoreItem {
  string name = 1;
}

// SnapshotIAVLItem is an exported IAVL node.
message SnapshotIAVLItem {
  bytes key     = 1;
  bytes value   = 2;
  int64 version = 3;
  int32 height  = 4;
}

Snapshots are generated by rootmulti.Store.Snapshot() as follows:

  1. Set up a protoio.NewDelimitedWriter that writes length-prefixed serialized SnapshotItem Protobuf messages.
    1. Iterate over each IAVL store in lexicographical order by store name.
    2. Emit a SnapshotStoreItem containing the store name.
    3. Start an IAVL export for the store using iavl.ImmutableTree.Export().
    4. Iterate over each IAVL node.
    5. Emit a SnapshotIAVLItem for the IAVL node.
  2. Pass the serialized Protobuf output stream to a zlib compression writer.
  3. Split the zlib output stream into chunks at exactly every 10th megabyte.

Snapshots are restored via rootmulti.Store.Restore() as the inverse of the above, using iavl.MutableTree.Import() to reconstruct each IAVL tree.

Snapshot Storage

Snapshot storage is managed by snapshots.Store, with metadata in a db.DB database and binary chunks in the filesystem. Note that this is only used to store locally taken snapshots that are being offered to other nodes. When the local node is being state synced, Tendermint will take care of buffering and storing incoming snapshot chunks before they are applied to the application.

Metadata is generally stored in a LevelDB database at <node_home>/data/snapshots/metadata.db. It contains serialized cosmos.base.snapshots.v1beta1.Snapshot Protobuf messages with a key given by the concatenation of a key prefix, the big-endian height, and the big-endian format. Chunk data is stored as regular files under <node_home>/data/snapshots/<height>/<format>/<chunk>.

The snapshots.Store API is based on streaming IO, and integrates easily with the snapshots.types.Snapshotter snapshot/restore interface implemented by rootmulti.Store. The Store.Save() method stores a snapshot given as a <- chan io.ReadCloser channel of binary chunk streams, and Store.Load() loads the snapshot as a channel of binary chunk streams -- the same stream types used by Snapshotter.Snapshot() and Snapshotter.Restore() to take and restore snapshots using streaming IO.

The store also provides many other methods such as List() to list stored snapshots, LoadChunk() to load a single snapshot chunk, and Prune() to prune old snapshots.

Taking Snapshots

snapshots.Manager is a high-level snapshot manager that integrates a snapshots.types.Snapshotter (i.e. the rootmulti.Store snapshot functionality) and a snapshots.Store, providing an API that maps easily onto the ABCI state sync API. The Manager will also make sure only one operation is in progress at a time, e.g. to prevent multiple snapshots being taken concurrently.

During BaseApp.Commit, once a state transition has been committed, the height is checked against the state-sync.snapshot-interval setting. If the committed height should be snapshotted, a goroutine BaseApp.snapshot() is spawned that calls snapshots.Manager.Create() to create the snapshot.

Manager.Create() will do some basic pre-flight checks, and then start generating a snapshot by calling rootmulti.Store.Snapshot(). The chunk stream is passed into snapshots.Store.Save(), which stores the chunks in the filesystem and records the snapshot metadata in the snapshot database.

Once the snapshot has been generated, BaseApp.snapshot() then removes any old snapshots based on the state-sync.snapshot-keep-recent setting.

Serving Snapshots

When a remote node is discovering snapshots for state sync, Tendermint will call the ListSnapshots ABCI method to list the snapshots present on the local node. This is dispatched to snapshots.Manager.List(), which in turn dispatches to snapshots.Store.List().

When a remote node is fetching snapshot chunks during state sync, Tendermint will call the LoadSnapshotChunk ABCI method to fetch a chunk from the local node. This dispatches to snapshots.Manager.LoadChunk(), which in turn dispatches to snapshots.Store.LoadChunk().

Restoring Snapshots

When the operator has configured the local Tendermint node to run state sync (see the resources listed in the introduction for details on Tendermint state sync), it will discover snapshots across the P2P network and offer their metadata in turn to the local application via the OfferSnapshot ABCI call.

BaseApp.OfferSnapshot() attempts to start a restore operation by calling snapshots.Manager.Restore(). This may fail, e.g. if the snapshot format is unknown (it may have been generated by a different version of the Cosmos SDK), in which case Tendermint will offer other discovered snapshots.

If the snapshot is accepted, Manager.Restore() will record that a restore operation is in progress, and spawn a separate goroutine that runs a synchronous rootmulti.Store.Restore() snapshot restoration which will be fed snapshot chunks until it is complete.

Tendermint will then start fetching and buffering chunks, providing them in order via ABCI ApplySnapshotChunk calls. These dispatch to Manager.RestoreChunk(), which passes the chunks to the ongoing restore process, checking if errors have been encountered yet (e.g. due to checksum mismatches or invalid IAVL data). Once the final chunk is passed, Manager.RestoreChunk() will wait for the restore process to complete before returning.

Once the restore is completed, Tendermint will go on to call the Info ABCI call to fetch the app hash, and compare this against the trusted chain app hash at the snapshot height to verify the restored state. If it matches, Tendermint goes on to process blocks.

Documentation

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

func DrainChunks

func DrainChunks(chunks <-chan io.ReadCloser)

DrainChunks drains and closes all remaining chunks from a chunk channel.

func IsFormatSupported

func IsFormatSupported(snapshotter types.ExtensionSnapshotter, format uint32) bool

IsFormatSupported returns if the snapshotter supports restoration from given format.

func ValidRestoreHeight

func ValidRestoreHeight(format uint32, height uint64) error

ValidRestoreHeight will check height is valid for snapshot restore or not

Types

type ChunkReader

type ChunkReader struct {
	// contains filtered or unexported fields
}

ChunkReader reads chunks from a channel of io.ReadClosers and outputs them as an io.Reader

func NewChunkReader

func NewChunkReader(ch <-chan io.ReadCloser) *ChunkReader

NewChunkReader creates a new ChunkReader.

func (*ChunkReader) Close

func (r *ChunkReader) Close() error

Close implements io.ReadCloser.

func (*ChunkReader) Read

func (r *ChunkReader) Read(p []byte) (int, error)

Read implements io.Reader.

type ChunkWriter

type ChunkWriter struct {
	// contains filtered or unexported fields
}

ChunkWriter reads an input stream, splits it into fixed-size chunks, and writes them to a sequence of io.ReadClosers via a channel.

func NewChunkWriter

func NewChunkWriter(ch chan<- io.ReadCloser, chunkSize uint64) *ChunkWriter

NewChunkWriter creates a new ChunkWriter. If chunkSize is 0, no chunking will be done.

func (*ChunkWriter) Close

func (w *ChunkWriter) Close() error

Close implements io.Closer.

func (*ChunkWriter) CloseWithError

func (w *ChunkWriter) CloseWithError(err error)

CloseWithError closes the writer and sends an error to the reader.

func (*ChunkWriter) Write

func (w *ChunkWriter) Write(data []byte) (int, error)

Write implements io.Writer.

type Manager

type Manager struct {
	// contains filtered or unexported fields
}

Manager manages snapshot and restore operations for an app, making sure only a single long-running operation is in progress at any given time, and provides convenience methods mirroring the ABCI interface.

Although the ABCI interface (and this manager) passes chunks as byte slices, the internal snapshot/restore APIs use IO streams (i.e. chan io.ReadCloser), for two reasons:

  1. In the future, ABCI should support streaming. Consider e.g. InitChain during chain upgrades, which currently passes the entire chain state as an in-memory byte slice. https://github.com/tendermint/tendermint/issues/5184
  1. io.ReadCloser streams automatically propagate IO errors, and can pass arbitrary errors via io.Pipe.CloseWithError().

func NewManager

func NewManager(store *Store, multistore types.Snapshotter, extensions map[string]types.ExtensionSnapshotter) *Manager

NewManager creates a new manager.

func (*Manager) Create

func (m *Manager) Create(height uint64) (*types.Snapshot, error)

Create creates a snapshot and returns its metadata.

func (*Manager) List

func (m *Manager) List() ([]*types.Snapshot, error)

List lists snapshots, mirroring ABCI ListSnapshots. It can be concurrent with other operations.

func (*Manager) LoadChunk

func (m *Manager) LoadChunk(height uint64, format uint32, chunk uint32) ([]byte, error)

LoadChunk loads a chunk into a byte slice, mirroring ABCI LoadChunk. It can be called concurrently with other operations. If the chunk does not exist, nil is returned.

func (*Manager) Prune

func (m *Manager) Prune(retain uint32) (uint64, error)

Prune prunes snapshots, if no other operations are in progress.

func (*Manager) RegisterExtensions

func (m *Manager) RegisterExtensions(extensions ...types.ExtensionSnapshotter) error

RegisterExtensions register extension snapshotters to manager

func (*Manager) Restore

func (m *Manager) Restore(snapshot types.Snapshot) error

Restore begins an async snapshot restoration, mirroring ABCI OfferSnapshot. Chunks must be fed via RestoreChunk() until the restore is complete or a chunk fails.

func (*Manager) RestoreChunk

func (m *Manager) RestoreChunk(chunk []byte) (bool, error)

RestoreChunk adds a chunk to an active snapshot restoration, mirroring ABCI ApplySnapshotChunk. Chunks must be given until the restore is complete, returning true, or a chunk errors.

type Store

type Store struct {
	// contains filtered or unexported fields
}

Store is a snapshot store, containing snapshot metadata and binary chunks.

func NewStore

func NewStore(db db.DB, dir string) (*Store, error)

NewStore creates a new snapshot store.

func (*Store) Delete

func (s *Store) Delete(height uint64, format uint32) error

Delete deletes a snapshot.

func (*Store) Get

func (s *Store) Get(height uint64, format uint32) (*types.Snapshot, error)

Get fetches snapshot info from the database.

func (*Store) GetLatest

func (s *Store) GetLatest() (*types.Snapshot, error)

Get fetches the latest snapshot from the database, if any.

func (*Store) List

func (s *Store) List() ([]*types.Snapshot, error)

List lists snapshots, in reverse order (newest first).

func (*Store) Load

func (s *Store) Load(height uint64, format uint32) (*types.Snapshot, <-chan io.ReadCloser, error)

Load loads a snapshot (both metadata and binary chunks). The chunks must be consumed and closed. Returns nil if the snapshot does not exist.

func (*Store) LoadChunk

func (s *Store) LoadChunk(height uint64, format uint32, chunk uint32) (io.ReadCloser, error)

LoadChunk loads a chunk from disk, or returns nil if it does not exist. The caller must call Close() on it when done.

func (*Store) Prune

func (s *Store) Prune(retain uint32) (uint64, error)

Prune removes old snapshots. The given number of most recent heights (regardless of format) are retained.

func (*Store) Save

func (s *Store) Save(
	height uint64, format uint32, chunks <-chan io.ReadCloser,
) (*types.Snapshot, error)

Save saves a snapshot to disk, returning it.

type StreamReader

type StreamReader struct {
	// contains filtered or unexported fields
}

StreamReader set up a restore stream pipeline chan io.ReadCloser -> chunkReader -> zlib -> delimited Protobuf -> ExportNode

func NewStreamReader

func NewStreamReader(chunks <-chan io.ReadCloser) (*StreamReader, error)

NewStreamReader set up a restore stream pipeline.

func (*StreamReader) Close

func (sr *StreamReader) Close() error

Close implements io.Closer interface

func (*StreamReader) ReadMsg

func (sr *StreamReader) ReadMsg(msg proto.Message) error

ReadMsg implements protoio.Reader interface

type StreamWriter

type StreamWriter struct {
	// contains filtered or unexported fields
}

StreamWriter set up a stream pipeline to serialize snapshot nodes: Exported Items -> delimited Protobuf -> zlib -> buffer -> chunkWriter -> chan io.ReadCloser

func NewStreamWriter

func NewStreamWriter(ch chan<- io.ReadCloser) *StreamWriter

NewStreamWriter set up a stream pipeline to serialize snapshot DB records.

func (*StreamWriter) Close

func (sw *StreamWriter) Close() error

Close implements io.Closer interface

func (*StreamWriter) CloseWithError

func (sw *StreamWriter) CloseWithError(err error)

CloseWithError pass error to chunkWriter

func (*StreamWriter) WriteMsg

func (sw *StreamWriter) WriteMsg(msg proto.Message) error

WriteMsg implements protoio.Write interface

Directories

Path Synopsis

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL