lantern-back-end

Lantern

Lantern is an open source tool developed by the Office of the National Coordinator for Health Information Technology (ONC) and the MITRE Corporation that monitors and provides analytics about the availability and adoption of FHIR API service base URLs (endpoints) across healthcare organizations in the United States. It also gathers information about FHIR Capability Statements returned by these endpoints and provides visualizations to show FHIR adoption and patient data availability. For more information, check out the “About Lantern” page on our website, https://www.lantern.healthit.gov.

Index

• Running Lantern - Basic Flow
• Using Docker Compose
• Testing Lantern - Basic Flow
• Make Commands
• Configure Data Collection Failure System
• Configure Backup System
• Running Lantern Services Individually
• Testing - Details
• Contributing
• License

Running Lantern - Basic Flow

Note: Before running the commands below, make sure that you either:

• have created a hidden file named .env in the root directory of the project containing the environment variables specified in the env.sample file.
• have the variables specified in the env.sample file defined as system environment variables.

Setup your environment

To run Lantern, several environment variables need to be set. These are defined within each project's README. Each README defines the variables that must be set on the system vs those whose default values are sufficient.

• Endpoint Manager
• Capability Querier
• Capability Receiver

Clean your environment

This is optional!

If you'd like to start with a clean slate, run:

make clean

This removes all docker images, networks, and local volumes.

Start Lantern

Production Environment

1. To start up Lantern with a production environment, in your terminal, run:

   make run_prod
   

   This starts all of the following services:

   • PostgreSQL - application database (port 5432)
   • LanternMQ (RabbitMQ) - the message queue (localhost:15672)
   • Capability Querier - queries the endpoints for their Capability Statements every 23 hours. Starting the service the first time will also query the endpoints.
   • Capability Receiver - receives the Capability Statements from the queue, performs validations and saves the results to the database table fhir_endpoints_info
   • Endpoint Manager - sends endpoints to the capability querying queues
   • Shinydashboard – the website (localhost:8090)

   Note: While running with the production environment, you will not be able to externally connect to the database or the message queue. Only the services can access those ports.

2. If you have a clean database or want to update the data in your database

   1. Run the following command to update the endpoint lists found in the production resources directory, lantern-back-end/resources/prod_resources.

    make update_source_data_prod
   

   This command will automatically query all the endpoint sources listed in EndpointResourceList.json for their endpoints. It will also query CHPL for its list of endpoint list sources, which is saved to CHPLEndpointResourcesList.json, and then query the endpoint lists (that have parsers written for them) for their endpoints. It then saves the first 10 endpoints from each list into their own files in the development resources directory, lantern-back-end/resources/dev_resources.

   Note: Google chrome must be installed in order to run this command and run the webscrapers needed for certain list sources.

   1. Run the following command to add data to the database, using the data found in lantern-back-end/resources/prod_resources.

   make populatedb_prod
   

   This runs the following tasks inside the endpoint manager container:

   • query the National Plan & Provider Enumeration System (NPPES) for their monthly export endpoint and NPI data files. Note: The command removes any entries in the NPI data file that are not organization entries.
   • the endpoint populator, which iterates over the list of endpoint sources and adds them to the database.
   • the CHPL querier, which requests Health IT product, vendor, and certification information from CHPL and adds these to the database
   • the NPPES endpoint populator, which adds endpoint data from the monthly NPPES export to the database.
   • the NPPES org populator, which adds provider data from the monthly NPPES export to the database.
   • the data validator, which ensures that the amount of data in the database can successfully be quried in the 23 hour query interval.

3. If you want to re-query and re-receive capability statements outside the refresh interval, run the following:

   docker restart lantern-back-end_endpoint_manager_1
   

Development Environment

1. To start up Lantern with a development environment, in your terminal, run:

   make run
   

   This starts all of the following services:

   • PostgreSQL - application database (localhost:5432)
   • LanternMQ (RabbitMQ) - the message queue (localhost:15672)
   • Capability Querier - queries the endpoints for their FHIR Capability Statements every 23 hours. Starting the service the first time will also query the endpoints.
   • Capability Receiver - receives the Capability Statements from the queue, performs validations and saves the results to the database table fhir_endpoints_info
   • Endpoint Manager - sends endpoints to the capability querying queues
   • Shinydashboard – the website (localhost:3838)

   Note: If you are interested in viewing the queue data and interacting with the queue directly, you can go to localhost:15672 while the system is running (only works while running as development). Use lanternadmin as both the username and password on the login page.

2. If you have a clean database or want to update the data in your database

   1. run the following command to update the endpoint lists found in the production resources directory, lantern-back-end/resources/prod_resources.

       make update_source_data
      

      This command will automatically query all the endpoint sources listed in EndpointResourceList.json for their endpoints. It will also query CHPL for its list of endpoint list sources, which is saved to CHPLEndpointResourcesList.json, and then query the endpoint lists (that have parsers written for them) for their endpoints. It then saves the first 10 endpoints from each list into their own files in the development resources directory, lantern-back-end/resources/dev_resources. It then queries NPPES for its endpoint and NPI data files, cut out all the entries in the NPI data file that are not organization entries, and then creates a copy of each file and reduce them to 1000 lines for development purposes.

      Note: Resources can be moved from lantern-back-end/resources/prod_resources to lantern-back-end/resources/dev_resources to be used in the development environment.

      Note: Google Chrome must be installed in order to run this command and run the webscrapers needed for certain list sources.

      Note: If you only want to query the endpoint sources without also querying NPPES, you can run make update_source_data_prod (see Production Environment section).

   2. Run the following command to add data to the database, using the data found in lantern-back-end/resources/dev_resources.

      make populatedb
      

      Note: The dev_resources directory contains fewer endpoints, to reduce unnecessary load on the servers hosting the endpoints we are querying while developing locally.

      This runs the following tasks inside the endpoint manager container:

      • the endpoint populator, which iterates over the list of endpoint sources and adds them to the database.
      • the CHPL querier, which requests Health IT product, vendor, and certification information from CHPL and adds these to the database
      • the NPPES endpoint populator, which adds endpoint data from the monthly NPPES export to the database.
      • the NPPES org populator, which adds provider data from the monthly NPPES export to the database.
      • the data validator, which ensures that the amount of data in the database can successfully be quried in the 23 hour query interval.

      The populate_db.sh script expects the dev_resources directory to contain the following files:

      • endpoint_pfile.csv - endpoint_pfile from the data dissemination package downloaded from https://download.cms.gov/nppes/NPI_Files.html
      • npidata_pfile.csv - npidata_pfile from the data dissemination package downloaded from https://download.cms.gov/nppes/NPI_Files.html Note: This file can take a very long time to load so for development purposes, the load time can be reduced by only using the first 100000 entries. The first 100000 entries can be obtained by running head -n 100000 npidata_pfile_20050523-20191110.csv >> npidata_pfile.csv. Alternatively, running make update_source_data adds truncated npi files to the dev_resources directory as well.

3. If you want to re-query and re-receive Capability Statements outside the refresh interval run the following:

   docker restart lantern-back-end_endpoint_manager_1
   

Stop Lantern

Production Environment

To stop Lantern when running with a production environment, run:

make stop_prod

Development Environment

To stop Lantern when running with a development environment, run:

make stop

Starting Services Behind SSL-Inspecting Proxy

If you are operating behind a proxy that does SSL-Inspection you will have to copy the certificates that are used by the proxy into the following directories:

• capabalitiyquerier/certs/
• capabilitiyreceiver/certs/
• endpointmanager/certs/
• lanternmq/certs
• shinydashboard/certs/
• e2e/certs
• db/migration/certs

Using Docker Compose

Lantern is a multi-container application that runs using Docker, and therefore Docker must be downloaded in order to set up the project. You can download Docker Desktop here, which includes Docker Compose. You can find more information about Docker compose here. Using Docker compose is a three-step process:

1. Define app environment with a Dockerfile so it can be reproduced anywhere
2. Define services that make up app in docker-compose.yml so they can be run together in an isolated environment
3. Run docker compose up and the Docker compose command starts and runs the entire app. Lantern's Makefile command make run and make run prod can be used to run the docker compose command to start the application

Windows Instructions

The Lantern system was developed on Mac computers and the production and staging servers run Linux. The code in GitHub will run as-is while running on either of these operating systems. If running the system on a Windows machine, however, a few changes will have to be made to the code directly.

• In all script files, change end of line sequence from CRLF to LF  
  • If using Visual Studio Code for development, it can easily be changed by clicking an option in the bottom right-hand corner to change the end of line sequence
• In the wait-for-it.sh file in the scripts directory, change #!/usr/bin/env bash to #!/bin/bash
• The environmental variable for the CHPL API key may not work. If so, the key can be entered manually into endpointmanager/pkg/chplquerier/chplquerier.go file, where originally viper.GetString("chplapikey")
• The make populatedb command in the Makefile may not work due to the machine generating the name of the container as lantern-back-end-endpoint_manager-1 rather than lantern-back-end_endpoint_manager_1. The fix is to change the make command to: docker exec -it lantern-back-end-endpoint_manager-1 /etc/lantern/populatedb.sh 
  • This may also have to be done for any other make commands that specifically reference Docker containers

Testing Lantern - Basic Flow

There are three types of tests for Lantern and three corresponding commands:

test type	command
unit	make test
integration	make test_int
end-to-end	make test_e2e

Make Commands

make command	action
make run	runs docker-compose for a development environment
make run_prod	runs docker-compose for a production environment
make stop	runs docker-compose down for a development environment
make stop_prod	runs docker-compose down for a development environment
make clean	runs docker-compose down with the --rmi local -v tags to remove local images and volumes. Runs this for all docker-compose setups. Before running, it confirms with the user that they actually want to clean.
make clean_remote	runs docker-compose down with the --rmi all -v tags to remove all images and volumes. Runs this for all docker-compose setups. Before running, it confirms with the user that they actually want to clean.
make test	runs unit tests
make test_int	runs integration tests
make test_e2e	runs end-to-end tests
make test_all	runs all tests and ends if any of the tests fail
make populatedb	Should be used with development environment by running make run first. Populates the database with the endpoint resource list information and NPPES information found in the resources/dev_resources directory.
make populatedb_prod	Should be used with production environment by running make run_prod first. Populates the database with the endpoint resource list information found in the resources/prod_resources directory, and queries NPPES for its latest information and automatically stores it in the database before deleting the files.
make backup_database	saves a database backup .sql file in the lantern base directory with name lantern_backup_<timestamp>.sql
make restore_database file=<backup file name>	restores the backup database that the 'file' parameter is set to
make migrate_database direction=<up/down> force_version=<migration version number to force db to>	Starts the postgres service and runs the next *.up.sql migration in the db/migration/migrations directory that has not yet been run. Must run this command the number times equal to the number of migrations you want to run. The optional direction parameter can be included to specify whether you want to run an up or down migration, and the force_version parameter can be included to force the database to a specific migration version before running the next migration. If the direction parameter is omitted, it will run an up migration by default, and if the force_version parameter is omitted, it runs the next migration that has not yet been run. The order of these two paramaters is important, and so if you want to include the force_version parameter, you must also include the direction parameter before it.
make update_source_data	Automatically queries the endpoint lists listed in the EndpointResourcesList.json file found in the resources/prod_resources directory, queries CHPL for its list of endpoint lists and stores the data in a file in the same directory, queries the NPPES NPI and endpoint data, and stores truncated versions of the files in the resources/dev_resources directory.
make update_source_data_prod	Automatically queries the endpoint lists listed in the EndpointResourcesList.json file found in the resources/prod_resources directory and queries CHPL for its list of endpoint lists and stores the data in a file in the same directory.
make lint	Runs the R and golang linters
make lint_go	Runs the golang lintr
make lint_R	Runs the R lintr
make json_export file=<export file name> exportType=<month/30days/all>	Exports the history of the endpoint data to a JSON file specified by the 'file' parameter. This 'file' parameter must only be a file name with the appropriate .json file extension, not a file path. Setting exportType equal to "month" creates the export file using only the last months history data, setting it to "30days" or leaving it blank will create the export file with all the history information from the last 30 days, and setting it to "all" will create an export file using all of the history data Lantern has stored.
make history_pruning	Prunes the fhir_endpoint_info_history table to remove duplicate entries
make create_archive start=<start date> end=<end date> file=<archive file name>	Creates an archive of the data in the database between the given dates in a JSON format and saves it to the given 'file' name. The dates format is '2021-01-31' (year, month, date). Example: make create_archive start=2020-06-01 end=2021-06-01 file=archive_file.json. Note: If the archive period includes any time between the current date and the LANTERN_PRUNING_THRESHOLD, then the given number of updates might be higher than expected because the history pruning algorithm is only run on data older than the threshold.
make migrate_validations direction=<up/down>	Runs validation migrations when direction is set to up. If direction is set to down, undos validation migrations
make migrate_resources direction=<up/down>	Runs resources migrations when direction is set to up. If direction is set to down, undos resources migrations

Configure Data Collection Failure System

You can configure a data collection failure system using cron and the data_collection_check.sh script located in the scripts directory to send an email notification if the lantern data collection goes down for any reason.

The data_collection_check.sh script runs outside of Lantern and periodically checks to see if data has been written to the fhir_endpoints_info within the last N many minutes, where N is the Lantern query interval. If data has not been written within said interval, or the database is down, then the script sends an alert to the set email address.

To set up the script for this data collection failure system, you must insert the correct information into the following variables located at the beginning of the data_collection_check script. The DB_NAME, DB_USER, and QUERY_INTERVAL variables used in the script should match their corresponding environmental variable (shown in parentheses below) defined in the .env file:

• Set the EMAIL variable to the email you want the failure system to send alerts to
• Set the DB_NAME variable to name of your database (LANTERN_DBNAME)
• Set the DB_USER variable to the name of the database user (LANTERN_DBUSER)
• Set the QUERY_INTERVAL variable to the capability querier query interval in minutes (LANTERN_CAPQUERY_QRYINTVL)

To configure this script to run using cron, do:

• Use crontab -e to open up and edit the current user’s cron jobs in the crontab file
• Add Minute(0-59) Hour(0-24) Day_of_month(1-31) Month(1-12) Day_of_week(0-6) <Full Path to data_collection_checks.sh> to the crontab file
• A * can be added to any field in the crontab expression to mean always
• A */ can be added before a number in any field to execute the script to run every certain amount of time
• Example: Add 0 */23 * * * <Full Path to data_collection_checks.sh> to run the script at minute 0 of every 23rd hour
• To display all scheduled cron jobs for the current user, you can use crontab -l
• You can halt the cron job by opening up the crontab file and commenting out the job with # or delete the crontab expression from the crontab file

Configure Backup System

You can configure a backup system using cron and the backup.sh script located in the scripts directory to send an email notification whenever the current backup becomes available.

To set up the script for this backup system, you must insert the correct information into the following variables located at the beginning of the backup script. The DB_NAME and DB_USER variables used in the script should match their corresponding environmental variable (shown in parentheses below) defined in the .env file:

• Set the EMAIL variable to the email you want the backup system to send alerts to
• Set the DB_NAME variable to name of your database (LANTERN_DBNAME)
• Set the DB_USER variable to the name of the database user (LANTERN_DBUSER)
• Set the BACKUP_DIR variable to wherever you want to save the backup file

To configure this script to run using cron, do:

• Use crontab -e to open up and edit the current user’s cron jobs in the crontab file
• Add Minute(0-59) Hour(0-24) Day_of_month(1-31) Month(1-12) Day_of_week(0-6) <Full Path to backup.sh> to the crontab file
• A * can be added to any field in the crontab expression to mean always
• A */ can be added before a number in any field to execute the script to run every certain amount of time
• Example: Add 0 */23 * * * <Full Path to backup.sh> to run the script at minute 0 of every 23rd hour
• To display all scheduled cron jobs for the current user, you can use crontab -l
• You can halt the cron job by opening up the crontab file and commenting out the job with # or delete the crontab expression from the crontab file

Configure CHPL Endpoint List Updater

You can configure a CHPL Endpoint List update checker using cron and the chpl_endpoint_list_check.sh script located in the scripts directory to send an email notification whenever the CHPL Endpoint List has been updated with new URLs. This script queries CHPL's list of endpoints and compares it to the CHPL endpoint list currently stored in the resources/prod_resources directory. If the CHPL list has been updated, the system will send an alert email with the updated URLs, and it will automatically update the list stored in resources/prod_resources with the new endpoint lists.

To set up the script for this CHPL endpoint list updater, you must insert the correct information into the following variables located at the beginning of the update checker script.

• Set the EMAIL variable to the email you want the CHPL endpoint list updater to send alerts to

To configure this script to run using cron, do:

• Use crontab -e to open up and edit the current user’s cron jobs in the crontab file
• Add Minute(0-59) Hour(0-24) Day_of_month(1-31) Month(1-12) Day_of_week(0-6) cd <Full path to scripts directory> && ./chpl_endpoint_list_check.sh to the crontab file
• A * can be added to any field in the crontab expression to mean always
• A */ can be added before a number in any field to execute the script to run every certain amount of time
• Example: Add 0 */23 * * * cd <Full path to scripts directory> && ./chpl_endpoint_list_check.sh to run the script at minute 0 of every 23rd hour
• To display all scheduled cron jobs for the current user, you can use crontab -l
• You can halt the cron job by opening up the crontab file and commenting out the job with # or delete the crontab expression from the crontab file

Configure Automatic Endpoint Resource Updater

You can configure an automatic endpoint resource update checker using cron and the automatic_endpoint_update.sh script located in the scripts directory to automatically update the resource lists found in the resources/prod_resources directory and then save all this information in the database. The task will send an email notification if the automatic update fails to be saved in the database.

To set up the script for this automatic endpoint resource updater, you must insert the correct information into the following variables located at the beginning of the update checker script.

• Set the EMAIL variable to the email you want the automatic endpoint resource updater to send failure alerts to in the automatic_endpoint_update.sh script

To configure this script to run using cron, do:

• Use crontab -e to open up and edit the current user’s cron jobs in the crontab file
• Add Minute(0-59) Hour(0-24) Day_of_month(1-31) Month(1-12) Day_of_week(0-6) cd <Full path to scripts directory> && ./automatic_endpoint_update.sh to the crontab file
• A * can be added to any field in the crontab expression to mean always
• A */ can be added before a number in any field to execute the script to run every certain amount of time
• Example: Add 1 * 1 */1 * cd <Full path to scripts directory> && ./automatic_endpoint_update.sh to run the script at minute 1 on day 1 in every month
• To display all scheduled cron jobs for the current user, you can use crontab -l
• You can halt the cron job by opening up the crontab file and commenting out the job with # or delete the crontab expression from the crontab file

Configure Automatic Production Database Population

You can configure an automatic production database population system using cron and the automatic_populatedb_prod.sh script located in the scripts directory to save all the endpoint information from the endpoint resource lists found in the resources/prod_resources directory into the database. The script also downloads the most recent NPPES file, stores all the information from that file into the database, and then deletes the NPPES file in order to save storage space. The task will send an email notification if the endpoint list information or NPPES information fails to be saved in the database.

To set up the script for this automatic production database population system, you must insert the correct information into the following variables located at the beginning of the automatic production database populator script.

• Set the EMAIL variable to the email you want the automatic production database populator to send failure alerts to in the automatic_populatedb_prod.sh script

To configure this script to run using cron, do:

• Use crontab -e to open up and edit the current user’s cron jobs in the crontab file
• Add Minute(0-59) Hour(0-24) Day_of_month(1-31) Month(1-12) Day_of_week(0-6) cd <Full path to scripts directory> && ./automatic_populatedb_prod.sh to the crontab file
• A * can be added to any field in the crontab expression to mean always
• A */ can be added before a number in any field to execute the script to run every certain amount of time
• Example: Add 1 * 1 */1 * cd <Full path to scripts directory> && ./automatic_populatedb_prod.sh to run the script at minute 1 on day 1 in every month
• To display all scheduled cron jobs for the current user, you can use crontab -l
• You can halt the cron job by opening up the crontab file and commenting out the job with # or delete the crontab expression from the crontab file

Configure Monthly JSON Export System

You can configure a system to run the json export process and create a json export file of the past month's data using cron and the save_monthly_json_export.sh script located in the scripts directory. This system will send an email notification if the json export process fails. It then moves the JSON monthly file to the directory as defined below, which zips the file and pushes it to the git repo at that directory.

To set up the script for this backup system, you must insert the correct information into the following variables located at the beginning of the save_monthly_json_export script.

• Set the EMAIL variable to the email you want to send json export failure alerts to
• Set the DIRECTORY variable to the git repo where the monthly file is pushed to.

To configure this script to run using cron, do:

• Use crontab -e to open up and edit the current user’s cron jobs in the crontab file
• Add Minute(0-59) Hour(0-24) Day_of_month(1-31) Month(1-12) Day_of_week(0-6) <Full Path to save_monthly_json_export.sh> to the crontab file
• A * can be added to any field in the crontab expression to mean always
• A */ can be added before a number in any field to execute the script to run every certain amount of time
• Example: Add 0 */23 * * * <Full Path to save_monthly_json_export.sh> to run the script at minute 0 of every 23rd hour
• To display all scheduled cron jobs for the current user, you can use crontab -l
• You can halt the cron job by opening up the crontab file and commenting out the job with # or delete the crontab expression from the crontab file

Configure History Pruning and JSON Export System

You can configure a system to run the history pruning and json export processes using cron and the history_prune_json_export.sh script located in the scripts directory to first prune the fhir_endpoints_info_history table and then create the JSON fhir endpoint export file. * NOTE: The history pruning and json export processes already run automatically by the endpoint manager every query interval after it finishes sending all the endpoints to the capability querier. To configure this script to run using cron, do:

• Use crontab -e to open up and edit the current user’s cron jobs in the crontab file
• Add Minute(0-59) Hour(0-24) Day_of_month(1-31) Month(1-12) Day_of_week(0-6) cd <Full Path to script directory> && ./history_prune_json_export.sh to the crontab file
• A * can be added to any field in the crontab expression to mean always
• A */ can be added before a number in any field to execute the script to run every certain amount of time
• Example: Add 0 */23 * * * cd <Full Path to script directory> && ./history_prune_json_export.sh to run the script at minute 0 of every 23rd hour
• To display all scheduled cron jobs for the current user, you can use crontab -l
• You can halt the cron job by opening up the crontab file and commenting out the job with # or delete the crontab expression from the crontab file

Running Lantern Services Individually

Internal Services

See each internal service's README to see how to run that service as a standalone service.

• Endpoint Manager
• Capability Querier
• Capability Receiver
• Lantern Message Queue

External Services

• PostgreSQL
• RabbitMQ

Initializing the Database by hand

• If you have postgres installed locally (which you can do with brew install postgresql), you can do:

  psql -h <container name> -p <port> -U <username> -d <database> -a -f <setup script>
  

  For example:

  psql -h postgres -p 5432 -U postgres -d postgres -a -f endpointmanager/dbsetup.sql
  

• If you don't have postgres installed locally, you can open the database in docker and then copy past the commands from the dbsetup.sql file in. Open the database in docker:

  docker exec -it <container name> psql -U <username>
  

  Connect to your database using \c <database name>

  Copy/paste the contents of dbsetup.sql or other sql commands into the command prompt.

RabbitMQ

The instructions below are modified from https://hub.docker.com/_/rabbitmq.

To start the RabbitMQ docker container, run

docker run -d --hostname lantern-mq --name lantern-mq -p 15672:15672 -p 5672:5672 rabbitmq:3-management

This will start a RabbitMQ container listening on the default port of 5672. If you give that a minute, then do docker logs lantern-mq, you'll see in the output a block similar to:

 node           : rabbit@lantern-mq
 home dir       : /var/lib/rabbitmq
 config file(s) : /etc/rabbitmq/rabbitmq.conf
 cookie hash    : 2VgNGhlcNws2enUk77Sv9w==
 log(s)         : <stdout>
 database dir   : /var/lib/rabbitmq/mnesia/rabbit@lantern-mq

You can also check that you have access to the admin page by navigating to http://localhost:15672 and using username and password lanternadmin:lanternadmin.

Hosting

To start Lantern automatically on linux system reboot create a systemd service file named Lantern-app.service in /etc/systemd/system directory

sudo vi /etc/systemd/system/lantern-app.service

Contents of the lantern-app.service file:

[Unit]
Description=Lantern Application Service
Requires=docker.service
After=docker.service

[Service]
Restart=always
Type=forking
TimeoutStartSec=0
WorkingDirectory=/home/centos/lantern-back-end
ExecStart=/bin/bash -c 'make run_prod'
ExecStop=/bin/bash -c 'make stop_prod'

[Install]
WantedBy=multi-user.target

Enable the Lantern-App service on start up sudo systemctl enable lantern-app

Start the Lantern service sudo systemctl start lantern-app

To stop the service sudo systemctl stop lantern-app

To view the status systemctl status lantern-app

Changes made to the lantern-app.service file will need to be reloaded and restarted

sudo systemctl daemon-reload
sudo systemctl restart lantern-app

Testing - Details

The test instructions in the Makefile include several additional flags to ensure that tests are run atomically and to check any resource usage conflicts due to parallelization. These are not listed below to reduce duplication. See the Makefile for the details.

Running Tests With Coverage

If you are interested in having coverage information displayed along with the pass/fail status' of the tests you can run the tests with the --covermode=count option.

go test -covermode=count ./...

If you are interested in more in-depth coverage analysis you'll have to generate a coverage report, in the following command the coverage report is named coverage.out

go test -coverprofile=coverage.out ./...

Using the generated coverage file you can use go tool cover to view the coverage report in your browser and see which lines are or are not being covered.

go tool cover -html=coverage.out

Running Integration Tests

To run integration tests (which take a long time to run), add the integration tag:

go test -tags=integration ./...

Running End to End Tests

Running this command will build the project containers and then run e2e/integration_tests/*.go

docker-compose -f docker-compose.yml -f docker-compose.override.yml -f docker-compose.test.yml up --build --abort-on-container-exit

To bring down all containers and remove all volumes used in the end-to-end tests you can run:

docker-compose -f docker-compose.yml -f docker-compose.override.yml -f docker-compose.test.yml down -v

A successful test will show the following output before the docker containers are stopped.

lantern-e2e                      | ok  	github.com/onc-healthit/lantern-back-end/e2e/integration_tests	30.031s
lantern-e2e exited with code 0

Contributing

Lintr

Code going through PR should pass the golang lintr invoked by running:

golangci-lint run -E gofmt

You may have to install golangci-lint first. To do this on a Mac you can run:

brew install golangci/tap/golangci-lint

More information about golangci-lint can be found here

Code should also run the R lintr without receiving any lintr warning messages, invoked by running:

Rscript -e lintr::lint_dir(linters = lintr::with_defaults(object_usage_linter=NULL, closed_curly_linter = NULL, open_curly_linter = NULL, line_length_linter = NULL, object_name_linter = NULL))

You may have to install R and the R lintr package first. To do this on a Mac, you can install R from the internet, and then you can run:

echo 'install.packages("lintr", dependencies = TRUE, repos="http://cran.rstudio.com/")' | R --save

Or you may run the lintr.sh script in the ./scripts directory which will install the lintr package if not already installed, then print out and throw an error if the lintr recommends any changes to the R code

More information about the R lintr can be found here

Make Commands

To make it easier, there are make commands that run the lintrs. The Go and R lintrs can be run on the Lantern code at any time using make lint There are also separate make commands to run the Go lintr and R lintr, which are make lint_go and make lint_R.

Running Shiny Load Test

To run a load test, install shiny load test and shiny cannon here

Record a user session in the R console

shinyloadtest::record_session('http://localhost:3838/', output_file = '/path/to/output/recording.log')

This will open a browser with the shiny dashboard loaded. Interact with the app and close the tab/browser to end session recording.

Run a load test in the terminal using the recorded session

shinycannon <path/to/recording.log> http://localhost:3838/ --workers 5 --loaded-duration-minutes 2 --output-dir /Path/for/output/run

The workers are number of concurrent users to simulate. The loaded duration minutes is how long to run the test for once it warms up (reaches the specified number of workers). A worker will repeat the session as many times as possible within the loaded duration.

Analyze the results

df <- shinyloadtest::load_runs("5 workers" = "/path/to/test/run")
shinyloadtest::shinyloadtest_report(df, "/path/for/output/report.html")

This will load the results of the test run into a dataframe then generate a report.

GoMod

If you make changes in one package and would like to use those changes in another package that depends on the first package that you change, commit your code and run make update_mods branch=<your_working_branch> This is especially relevant when running your new code in docker images built for the e2e, capabilityquerier, endpointmanager, capabilityreciever packages as the go.mod files are what will be used to determine which versions of the packages should be checked out when the docker images are built. Your final commit in a PR should be the go.mod and go.sum updates that occur as a result of running make update_mods branch=<your_working_branch>

License

Copyright 2023 The MITRE Corporation

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.