configv1

type Config struct {
	LogLevel                 LogLevel `protobuf:"varint,1,opt,name=log_level,json=logLevel,proto3,enum=hyprpanel.config.v1.LogLevel" json:"log_level,omitempty"` // specifies the maximum log level for output.
	LogSubprocessesToJournal bool     ``                                                                                                                         // send processes spawned by e.g. taskbar launchers to the systemd journal via sytstemd-cat.
	/* 138-byte string literal not displayed */
	Dbus   *Config_DBUS  `protobuf:"bytes,3,opt,name=dbus,proto3" json:"dbus,omitempty"`     // dbus configuration section.
	Audio  *Config_Audio `protobuf:"bytes,4,opt,name=audio,proto3" json:"audio,omitempty"`   // audio configuration section.
	Panels []*Panel      `protobuf:"bytes,6,rep,name=panels,proto3" json:"panels,omitempty"` // list of panels to display.
	// contains filtered or unexported fields
}

type Config_Audio struct {
	Enabled             bool   `protobuf:"varint,1,opt,name=enabled,proto3" json:"enabled,omitempty"`                                                      // if false, no Audio functionality is available.
	VolumeStepPercent   uint32 `protobuf:"varint,2,opt,name=volume_step_percent,json=volumeStepPercent,proto3" json:"volume_step_percent,omitempty"`       // percentage that volume should change on each adjustment.
	VolumeExceedMaximum bool   `protobuf:"varint,3,opt,name=volume_exceed_maximum,json=volumeExceedMaximum,proto3" json:"volume_exceed_maximum,omitempty"` // allow increasing volume above 100%.
	HudNotifications    bool   `protobuf:"varint,4,opt,name=hud_notifications,json=hudNotifications,proto3" json:"hud_notifications,omitempty"`            // display HUD notifications on volume change (requires at least one HUD module).
	// contains filtered or unexported fields
}

type Config_DBUS struct {
	Enabled         bool                       `protobuf:"varint,1,opt,name=enabled,proto3" json:"enabled,omitempty"`                                       // if false, no DBUS functionality is available.
	ConnectTimeout  *durationpb.Duration       `protobuf:"bytes,2,opt,name=connect_timeout,json=connectTimeout,proto3" json:"connect_timeout,omitempty"`    // specifies the maximum time we will attempt to connect to the bus before failing (format: "20s").
	ConnectInterval *durationpb.Duration       `protobuf:"bytes,3,opt,name=connect_interval,json=connectInterval,proto3" json:"connect_interval,omitempty"` // specifies the interval that we will attempt to connect to the session bus on startup (format: "0.200s").
	Notifications   *Config_DBUS_Notifications `protobuf:"bytes,4,opt,name=notifications,proto3" json:"notifications,omitempty"`                            // notifications configuration.
	Systray         *Config_DBUS_Systray       `protobuf:"bytes,5,opt,name=systray,proto3" json:"systray,omitempty"`                                        // systray configuration.
	Shortcuts       *Config_DBUS_Shortcuts     `protobuf:"bytes,6,opt,name=shortcuts,proto3" json:"shortcuts,omitempty"`                                    // shortcuts configuration.
	Brightness      *Config_DBUS_Brightness    `protobuf:"bytes,7,opt,name=brightness,proto3" json:"brightness,omitempty"`                                  // brightness configuration.
	Power           *Config_DBUS_Power         `protobuf:"bytes,8,opt,name=power,proto3" json:"power,omitempty"`                                            // power configuration.
	// contains filtered or unexported fields
}

type Config_DBUS_Brightness struct {
	Enabled           bool   `protobuf:"varint,1,opt,name=enabled,proto3" json:"enabled,omitempty"`                                                // enables brightness control functionality.
	AdjustStepPercent uint32 `protobuf:"varint,2,opt,name=adjust_step_percent,json=adjustStepPercent,proto3" json:"adjust_step_percent,omitempty"` // percentage that brightness should change on each adjustment.
	MinBrightness     uint32 `protobuf:"varint,3,opt,name=min_brightness,json=minBrightness,proto3" json:"min_brightness,omitempty"`               // minimum brightness value.
	EnableLogind      bool   `protobuf:"varint,4,opt,name=enable_logind,json=enableLogind,proto3" json:"enable_logind,omitempty"`                  // set brightness via systemd-logind DBUS interface instead of direct sysfs. Requires logind session, and DBUS.enabled = true.
	HudNotifications  bool   `protobuf:"varint,5,opt,name=hud_notifications,json=hudNotifications,proto3" json:"hud_notifications,omitempty"`      // display HUD notifications on change (requires at least one HUD module).
	// contains filtered or unexported fields
}

type Config_DBUS_Notifications struct {
	Enabled bool `protobuf:"varint,1,opt,name=enabled,proto3" json:"enabled,omitempty"` // toggles the notification host functionality, required for "notifications" module.
	// contains filtered or unexported fields
}

type Config_DBUS_Power struct {
	Enabled          bool   `protobuf:"varint,1,opt,name=enabled,proto3" json:"enabled,omitempty"`                                           // enables power functionality.
	LowPercent       uint32 `protobuf:"varint,2,opt,name=low_percent,json=lowPercent,proto3" json:"low_percent,omitempty"`                   // percentage below which we should consider low power.
	CriticalPercent  uint32 `protobuf:"varint,3,opt,name=critical_percent,json=criticalPercent,proto3" json:"critical_percent,omitempty"`    // percentage below which we should consider critical power.
	LowCommand       string `protobuf:"bytes,4,opt,name=low_command,json=lowCommand,proto3" json:"low_command,omitempty"`                    // command to execute on low power.
	CriticalCommand  string `protobuf:"bytes,5,opt,name=critical_command,json=criticalCommand,proto3" json:"critical_command,omitempty"`     // command to execute on critical power.
	HudNotifications bool   `protobuf:"varint,6,opt,name=hud_notifications,json=hudNotifications,proto3" json:"hud_notifications,omitempty"` // display HUD notifications on power state change or low power.
	// contains filtered or unexported fields
}

type Config_DBUS_Shortcuts struct {
	Enabled bool `protobuf:"varint,4,opt,name=enabled,proto3" json:"enabled,omitempty"` // enables GlobalShortcuts support.
	// contains filtered or unexported fields
}

type Config_DBUS_Systray struct {
	Enabled bool `protobuf:"varint,3,opt,name=enabled,proto3" json:"enabled,omitempty"` // toggles the StatusNotifierItem host, required for "systray" module. Must be the only SNI implementation running in the session.
	// contains filtered or unexported fields
}

type Edge int32

type LogLevel int32

type Panel struct {
	Id      string       `protobuf:"bytes,1,opt,name=id,proto3" json:"id,omitempty"`                                    // unique identifier for this panel.
	Edge    Edge         `protobuf:"varint,2,opt,name=edge,proto3,enum=hyprpanel.config.v1.Edge" json:"edge,omitempty"` // screen edge to place this panel.
	Size    uint32       `protobuf:"varint,3,opt,name=size,proto3" json:"size,omitempty"`                               // either width or height in pixels, depending on orientation for screen edge.
	Monitor string       `protobuf:"bytes,4,opt,name=monitor,proto3" json:"monitor,omitempty"`                          // monitor to display this panel on.
	Modules []*v1.Module `protobuf:"bytes,5,rep,name=modules,proto3" json:"modules,omitempty"`                          // list of modules for this panel.
	// contains filtered or unexported fields
}