directconnect

package
v1.8.3-0...-2c0ef11 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Mar 24, 2017 License: Apache-2.0 Imports: 8 Imported by: 0

Documentation

Overview

Package directconnect provides a client for AWS Direct Connect.

Index

Examples

Constants

View Source
const (
	// AddressFamilyIpv4 is a AddressFamily enum value
	AddressFamilyIpv4 = "ipv4"

	// AddressFamilyIpv6 is a AddressFamily enum value
	AddressFamilyIpv6 = "ipv6"
)

Indicates the address family for the BGP peer.

  • ipv4: IPv4 address family

  • ipv6: IPv6 address family

View Source
const (
	// BGPPeerStateVerifying is a BGPPeerState enum value
	BGPPeerStateVerifying = "verifying"

	// BGPPeerStatePending is a BGPPeerState enum value
	BGPPeerStatePending = "pending"

	// BGPPeerStateAvailable is a BGPPeerState enum value
	BGPPeerStateAvailable = "available"

	// BGPPeerStateDeleting is a BGPPeerState enum value
	BGPPeerStateDeleting = "deleting"

	// BGPPeerStateDeleted is a BGPPeerState enum value
	BGPPeerStateDeleted = "deleted"
)

The state of the BGP peer.

  • Verifying: The BGP peering addresses or ASN require validation before the BGP peer can be created. This state only applies to BGP peers on a public virtual interface.

  • Pending: The BGP peer has been created, and is in this state until it is ready to be established.

  • Available: The BGP peer can be established.

  • Deleting: The BGP peer is in the process of being deleted.

  • Deleted: The BGP peer has been deleted and cannot be established.

View Source
const (
	// BGPStatusUp is a BGPStatus enum value
	BGPStatusUp = "up"

	// BGPStatusDown is a BGPStatus enum value
	BGPStatusDown = "down"
)

The Up/Down state of the BGP peer.

  • Up: The BGP peer is established.

  • Down: The BGP peer is down.

View Source
const (
	// ConnectionStateOrdering is a ConnectionState enum value
	ConnectionStateOrdering = "ordering"

	// ConnectionStateRequested is a ConnectionState enum value
	ConnectionStateRequested = "requested"

	// ConnectionStatePending is a ConnectionState enum value
	ConnectionStatePending = "pending"

	// ConnectionStateAvailable is a ConnectionState enum value
	ConnectionStateAvailable = "available"

	// ConnectionStateDown is a ConnectionState enum value
	ConnectionStateDown = "down"

	// ConnectionStateDeleting is a ConnectionState enum value
	ConnectionStateDeleting = "deleting"

	// ConnectionStateDeleted is a ConnectionState enum value
	ConnectionStateDeleted = "deleted"

	// ConnectionStateRejected is a ConnectionState enum value
	ConnectionStateRejected = "rejected"
)

State of the connection.

  • Ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.

  • Requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.

  • Pending: The connection has been approved, and is being initialized.

  • Available: The network link is up, and the connection is ready for use.

  • Down: The network link is down.

  • Deleting: The connection is in the process of being deleted.

  • Deleted: The connection has been deleted.

  • Rejected: A hosted connection in the 'Ordering' state will enter the 'Rejected' state if it is deleted by the end customer.

View Source
const (
	// InterconnectStateRequested is a InterconnectState enum value
	InterconnectStateRequested = "requested"

	// InterconnectStatePending is a InterconnectState enum value
	InterconnectStatePending = "pending"

	// InterconnectStateAvailable is a InterconnectState enum value
	InterconnectStateAvailable = "available"

	// InterconnectStateDown is a InterconnectState enum value
	InterconnectStateDown = "down"

	// InterconnectStateDeleting is a InterconnectState enum value
	InterconnectStateDeleting = "deleting"

	// InterconnectStateDeleted is a InterconnectState enum value
	InterconnectStateDeleted = "deleted"
)

State of the interconnect.

  • Requested: The initial state of an interconnect. The interconnect stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.

  • Pending: The interconnect has been approved, and is being initialized.

  • Available: The network link is up, and the interconnect is ready for use.

  • Down: The network link is down.

  • Deleting: The interconnect is in the process of being deleted.

  • Deleted: The interconnect has been deleted.

View Source
const (
	// LagStateRequested is a LagState enum value
	LagStateRequested = "requested"

	// LagStatePending is a LagState enum value
	LagStatePending = "pending"

	// LagStateAvailable is a LagState enum value
	LagStateAvailable = "available"

	// LagStateDown is a LagState enum value
	LagStateDown = "down"

	// LagStateDeleting is a LagState enum value
	LagStateDeleting = "deleting"

	// LagStateDeleted is a LagState enum value
	LagStateDeleted = "deleted"
)

The state of the LAG.

  • Requested: The initial state of a LAG. The LAG stays in the requested state until the Letter of Authorization (LOA) is available.

  • Pending: The LAG has been approved, and is being initialized.

  • Available: The network link is established, and the LAG is ready for use.

  • Down: The network link is down.

  • Deleting: The LAG is in the process of being deleted.

  • Deleted: The LAG has been deleted.

View Source
const (
	// VirtualInterfaceStateConfirming is a VirtualInterfaceState enum value
	VirtualInterfaceStateConfirming = "confirming"

	// VirtualInterfaceStateVerifying is a VirtualInterfaceState enum value
	VirtualInterfaceStateVerifying = "verifying"

	// VirtualInterfaceStatePending is a VirtualInterfaceState enum value
	VirtualInterfaceStatePending = "pending"

	// VirtualInterfaceStateAvailable is a VirtualInterfaceState enum value
	VirtualInterfaceStateAvailable = "available"

	// VirtualInterfaceStateDown is a VirtualInterfaceState enum value
	VirtualInterfaceStateDown = "down"

	// VirtualInterfaceStateDeleting is a VirtualInterfaceState enum value
	VirtualInterfaceStateDeleting = "deleting"

	// VirtualInterfaceStateDeleted is a VirtualInterfaceState enum value
	VirtualInterfaceStateDeleted = "deleted"

	// VirtualInterfaceStateRejected is a VirtualInterfaceState enum value
	VirtualInterfaceStateRejected = "rejected"
)

State of the virtual interface.

  • Confirming: The creation of the virtual interface is pending confirmation from the virtual interface owner. If the owner of the virtual interface is different from the owner of the connection on which it is provisioned, then the virtual interface will remain in this state until it is confirmed by the virtual interface owner.

  • Verifying: This state only applies to public virtual interfaces. Each public virtual interface needs validation before the virtual interface can be created.

  • Pending: A virtual interface is in this state from the time that it is created until the virtual interface is ready to forward traffic.

  • Available: A virtual interface that is able to forward traffic.

  • Down: A virtual interface that is BGP down.

  • Deleting: A virtual interface is in this state immediately after calling DeleteVirtualInterface until it can no longer forward traffic.

  • Deleted: A virtual interface that cannot forward traffic.

  • Rejected: The virtual interface owner has declined creation of the virtual interface. If a virtual interface in the 'Confirming' state is deleted by the virtual interface owner, the virtual interface will enter the 'Rejected' state.

View Source
const (

	// ErrCodeClientException for service response error code
	// "ClientException".
	//
	// The API was called with invalid parameters. The error message will contain
	// additional details about the cause.
	ErrCodeClientException = "ClientException"

	// ErrCodeDuplicateTagKeysException for service response error code
	// "DuplicateTagKeysException".
	//
	// A tag key was specified more than once.
	ErrCodeDuplicateTagKeysException = "DuplicateTagKeysException"

	// ErrCodeServerException for service response error code
	// "ServerException".
	//
	// A server-side error occurred during the API call. The error message will
	// contain additional details about the cause.
	ErrCodeServerException = "ServerException"

	// ErrCodeTooManyTagsException for service response error code
	// "TooManyTagsException".
	//
	// You have reached the limit on the number of tags that can be assigned to
	// a Direct Connect resource.
	ErrCodeTooManyTagsException = "TooManyTagsException"
)
View Source
const (
	ServiceName = "directconnect" // Service endpoint prefix API calls made to.
	EndpointsID = ServiceName     // Service ID for Regions and Endpoints metadata.
)

Service information constants

View Source
const (
	// LoaContentTypeApplicationPdf is a LoaContentType enum value
	LoaContentTypeApplicationPdf = "application/pdf"
)

A standard media type indicating the content type of the LOA-CFA document. Currently, the only supported value is "application/pdf".

Default: application/pdf

Variables

This section is empty.

Functions

This section is empty.

Types

type AllocateConnectionOnInterconnectInput

type AllocateConnectionOnInterconnectInput struct {

	// Bandwidth of the connection.
	//
	// Example: "500Mbps"
	//
	// Default: None
	//
	// Values: 50Mbps, 100Mbps, 200Mbps, 300Mbps, 400Mbps, or 500Mbps
	//
	// Bandwidth is a required field
	Bandwidth *string `locationName:"bandwidth" type:"string" required:"true"`

	// Name of the provisioned connection.
	//
	// Example: "500M Connection to AWS"
	//
	// Default: None
	//
	// ConnectionName is a required field
	ConnectionName *string `locationName:"connectionName" type:"string" required:"true"`

	// ID of the interconnect on which the connection will be provisioned.
	//
	// Example: dxcon-456abc78
	//
	// Default: None
	//
	// InterconnectId is a required field
	InterconnectId *string `locationName:"interconnectId" type:"string" required:"true"`

	// Numeric account Id of the customer for whom the connection will be provisioned.
	//
	// Example: 123443215678
	//
	// Default: None
	//
	// OwnerAccount is a required field
	OwnerAccount *string `locationName:"ownerAccount" type:"string" required:"true"`

	// The dedicated VLAN provisioned to the connection.
	//
	// Example: 101
	//
	// Default: None
	//
	// Vlan is a required field
	Vlan *int64 `locationName:"vlan" type:"integer" required:"true"`
	// contains filtered or unexported fields
}

Container for the parameters to the AllocateConnectionOnInterconnect operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/AllocateConnectionOnInterconnectRequest

func (AllocateConnectionOnInterconnectInput) GoString

GoString returns the string representation

func (*AllocateConnectionOnInterconnectInput) SetBandwidth

SetBandwidth sets the Bandwidth field's value.

func (*AllocateConnectionOnInterconnectInput) SetConnectionName

SetConnectionName sets the ConnectionName field's value.

func (*AllocateConnectionOnInterconnectInput) SetInterconnectId

SetInterconnectId sets the InterconnectId field's value.

func (*AllocateConnectionOnInterconnectInput) SetOwnerAccount

SetOwnerAccount sets the OwnerAccount field's value.

func (*AllocateConnectionOnInterconnectInput) SetVlan

SetVlan sets the Vlan field's value.

func (AllocateConnectionOnInterconnectInput) String

String returns the string representation

func (*AllocateConnectionOnInterconnectInput) Validate

Validate inspects the fields of the type to determine if they are valid.

type AllocateHostedConnectionInput

type AllocateHostedConnectionInput struct {

	// The bandwidth of the connection.
	//
	// Example: 500Mbps
	//
	// Default: None
	//
	// Values: 50Mbps, 100Mbps, 200Mbps, 300Mbps, 400Mbps, or 500Mbps
	//
	// Bandwidth is a required field
	Bandwidth *string `locationName:"bandwidth" type:"string" required:"true"`

	// The ID of the interconnect or LAG on which the connection will be provisioned.
	//
	// Example: dxcon-456abc78 or dxlag-abc123
	//
	// Default: None
	//
	// ConnectionId is a required field
	ConnectionId *string `locationName:"connectionId" type:"string" required:"true"`

	// The name of the provisioned connection.
	//
	// Example: "500M Connection to AWS"
	//
	// Default: None
	//
	// ConnectionName is a required field
	ConnectionName *string `locationName:"connectionName" type:"string" required:"true"`

	// The numeric account ID of the customer for whom the connection will be provisioned.
	//
	// Example: 123443215678
	//
	// Default: None
	//
	// OwnerAccount is a required field
	OwnerAccount *string `locationName:"ownerAccount" type:"string" required:"true"`

	// The dedicated VLAN provisioned to the hosted connection.
	//
	// Example: 101
	//
	// Default: None
	//
	// Vlan is a required field
	Vlan *int64 `locationName:"vlan" type:"integer" required:"true"`
	// contains filtered or unexported fields
}

Container for the parameters to theHostedConnection operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/AllocateHostedConnectionRequest

func (AllocateHostedConnectionInput) GoString

GoString returns the string representation

func (*AllocateHostedConnectionInput) SetBandwidth

SetBandwidth sets the Bandwidth field's value.

func (*AllocateHostedConnectionInput) SetConnectionId

SetConnectionId sets the ConnectionId field's value.

func (*AllocateHostedConnectionInput) SetConnectionName

SetConnectionName sets the ConnectionName field's value.

func (*AllocateHostedConnectionInput) SetOwnerAccount

SetOwnerAccount sets the OwnerAccount field's value.

func (*AllocateHostedConnectionInput) SetVlan

SetVlan sets the Vlan field's value.

func (AllocateHostedConnectionInput) String

String returns the string representation

func (*AllocateHostedConnectionInput) Validate

func (s *AllocateHostedConnectionInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AllocatePrivateVirtualInterfaceInput

type AllocatePrivateVirtualInterfaceInput struct {

	// The connection ID on which the private virtual interface is provisioned.
	//
	// Default: None
	//
	// ConnectionId is a required field
	ConnectionId *string `locationName:"connectionId" type:"string" required:"true"`

	// Detailed information for the private virtual interface to be provisioned.
	//
	// Default: None
	//
	// NewPrivateVirtualInterfaceAllocation is a required field
	NewPrivateVirtualInterfaceAllocation *NewPrivateVirtualInterfaceAllocation `locationName:"newPrivateVirtualInterfaceAllocation" type:"structure" required:"true"`

	// The AWS account that will own the new private virtual interface.
	//
	// Default: None
	//
	// OwnerAccount is a required field
	OwnerAccount *string `locationName:"ownerAccount" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Container for the parameters to the AllocatePrivateVirtualInterface operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/AllocatePrivateVirtualInterfaceRequest

func (AllocatePrivateVirtualInterfaceInput) GoString

GoString returns the string representation

func (*AllocatePrivateVirtualInterfaceInput) SetConnectionId

SetConnectionId sets the ConnectionId field's value.

func (*AllocatePrivateVirtualInterfaceInput) SetNewPrivateVirtualInterfaceAllocation

SetNewPrivateVirtualInterfaceAllocation sets the NewPrivateVirtualInterfaceAllocation field's value.

func (*AllocatePrivateVirtualInterfaceInput) SetOwnerAccount

SetOwnerAccount sets the OwnerAccount field's value.

func (AllocatePrivateVirtualInterfaceInput) String

String returns the string representation

func (*AllocatePrivateVirtualInterfaceInput) Validate

Validate inspects the fields of the type to determine if they are valid.

type AllocatePublicVirtualInterfaceInput

type AllocatePublicVirtualInterfaceInput struct {

	// The connection ID on which the public virtual interface is provisioned.
	//
	// Default: None
	//
	// ConnectionId is a required field
	ConnectionId *string `locationName:"connectionId" type:"string" required:"true"`

	// Detailed information for the public virtual interface to be provisioned.
	//
	// Default: None
	//
	// NewPublicVirtualInterfaceAllocation is a required field
	NewPublicVirtualInterfaceAllocation *NewPublicVirtualInterfaceAllocation `locationName:"newPublicVirtualInterfaceAllocation" type:"structure" required:"true"`

	// The AWS account that will own the new public virtual interface.
	//
	// Default: None
	//
	// OwnerAccount is a required field
	OwnerAccount *string `locationName:"ownerAccount" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Container for the parameters to the AllocatePublicVirtualInterface operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/AllocatePublicVirtualInterfaceRequest

func (AllocatePublicVirtualInterfaceInput) GoString

GoString returns the string representation

func (*AllocatePublicVirtualInterfaceInput) SetConnectionId

SetConnectionId sets the ConnectionId field's value.

func (*AllocatePublicVirtualInterfaceInput) SetNewPublicVirtualInterfaceAllocation

SetNewPublicVirtualInterfaceAllocation sets the NewPublicVirtualInterfaceAllocation field's value.

func (*AllocatePublicVirtualInterfaceInput) SetOwnerAccount

SetOwnerAccount sets the OwnerAccount field's value.

func (AllocatePublicVirtualInterfaceInput) String

String returns the string representation

func (*AllocatePublicVirtualInterfaceInput) Validate

Validate inspects the fields of the type to determine if they are valid.

type AssociateConnectionWithLagInput

type AssociateConnectionWithLagInput struct {

	// The ID of the connection.
	//
	// Example: dxcon-abc123
	//
	// Default: None
	//
	// ConnectionId is a required field
	ConnectionId *string `locationName:"connectionId" type:"string" required:"true"`

	// The ID of the LAG with which to associate the connection.
	//
	// Example: dxlag-abc123
	//
	// Default: None
	//
	// LagId is a required field
	LagId *string `locationName:"lagId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Container for the parameters to the AssociateConnectionWithLag operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/AssociateConnectionWithLagRequest

func (AssociateConnectionWithLagInput) GoString

GoString returns the string representation

func (*AssociateConnectionWithLagInput) SetConnectionId

SetConnectionId sets the ConnectionId field's value.

func (*AssociateConnectionWithLagInput) SetLagId

SetLagId sets the LagId field's value.

func (AssociateConnectionWithLagInput) String

String returns the string representation

func (*AssociateConnectionWithLagInput) Validate

func (s *AssociateConnectionWithLagInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AssociateHostedConnectionInput

type AssociateHostedConnectionInput struct {

	// The ID of the hosted connection.
	//
	// Example: dxcon-abc123
	//
	// Default: None
	//
	// ConnectionId is a required field
	ConnectionId *string `locationName:"connectionId" type:"string" required:"true"`

	// The ID of the interconnect or the LAG.
	//
	// Example: dxcon-abc123 or dxlag-abc123
	//
	// Default: None
	//
	// ParentConnectionId is a required field
	ParentConnectionId *string `locationName:"parentConnectionId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Container for the parameters to the AssociateHostedConnection operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/AssociateHostedConnectionRequest

func (AssociateHostedConnectionInput) GoString

GoString returns the string representation

func (*AssociateHostedConnectionInput) SetConnectionId

SetConnectionId sets the ConnectionId field's value.

func (*AssociateHostedConnectionInput) SetParentConnectionId

SetParentConnectionId sets the ParentConnectionId field's value.

func (AssociateHostedConnectionInput) String

String returns the string representation

func (*AssociateHostedConnectionInput) Validate

func (s *AssociateHostedConnectionInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AssociateVirtualInterfaceInput

type AssociateVirtualInterfaceInput struct {

	// The ID of the LAG or connection with which to associate the virtual interface.
	//
	// Example: dxlag-abc123 or dxcon-abc123
	//
	// Default: None
	//
	// ConnectionId is a required field
	ConnectionId *string `locationName:"connectionId" type:"string" required:"true"`

	// The ID of the virtual interface.
	//
	// Example: dxvif-123dfg56
	//
	// Default: None
	//
	// VirtualInterfaceId is a required field
	VirtualInterfaceId *string `locationName:"virtualInterfaceId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Container for the parameters to the AssociateVirtualInterface operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/AssociateVirtualInterfaceRequest

func (AssociateVirtualInterfaceInput) GoString

GoString returns the string representation

func (*AssociateVirtualInterfaceInput) SetConnectionId

SetConnectionId sets the ConnectionId field's value.

func (*AssociateVirtualInterfaceInput) SetVirtualInterfaceId

SetVirtualInterfaceId sets the VirtualInterfaceId field's value.

func (AssociateVirtualInterfaceInput) String

String returns the string representation

func (*AssociateVirtualInterfaceInput) Validate

func (s *AssociateVirtualInterfaceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type BGPPeer

type BGPPeer struct {

	// Indicates the address family for the BGP peer.
	//
	//    * ipv4: IPv4 address family
	//
	//    * ipv6: IPv6 address family
	AddressFamily *string `locationName:"addressFamily" type:"string" enum:"AddressFamily"`

	// IP address assigned to the Amazon interface.
	//
	// Example: 192.168.1.1/30 or 2001:db8::1/125
	AmazonAddress *string `locationName:"amazonAddress" type:"string"`

	// The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
	//
	// Example: 65000
	Asn *int64 `locationName:"asn" type:"integer"`

	// The authentication key for BGP configuration.
	//
	// Example: asdf34example
	AuthKey *string `locationName:"authKey" type:"string"`

	// The state of the BGP peer.
	//
	//    * Verifying: The BGP peering addresses or ASN require validation before
	//    the BGP peer can be created. This state only applies to BGP peers on a
	//    public virtual interface.
	//
	//    * Pending: The BGP peer has been created, and is in this state until it
	//    is ready to be established.
	//
	//    * Available: The BGP peer can be established.
	//
	//    * Deleting: The BGP peer is in the process of being deleted.
	//
	//    * Deleted: The BGP peer has been deleted and cannot be established.
	BgpPeerState *string `locationName:"bgpPeerState" type:"string" enum:"BGPPeerState"`

	// The Up/Down state of the BGP peer.
	//
	//    * Up: The BGP peer is established.
	//
	//    * Down: The BGP peer is down.
	BgpStatus *string `locationName:"bgpStatus" type:"string" enum:"BGPStatus"`

	// IP address assigned to the customer interface.
	//
	// Example: 192.168.1.2/30 or 2001:db8::2/125
	CustomerAddress *string `locationName:"customerAddress" type:"string"`
	// contains filtered or unexported fields
}

A structure containing information about a BGP peer. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/BGPPeer

func (BGPPeer) GoString

func (s BGPPeer) GoString() string

GoString returns the string representation

func (*BGPPeer) SetAddressFamily

func (s *BGPPeer) SetAddressFamily(v string) *BGPPeer

SetAddressFamily sets the AddressFamily field's value.

func (*BGPPeer) SetAmazonAddress

func (s *BGPPeer) SetAmazonAddress(v string) *BGPPeer

SetAmazonAddress sets the AmazonAddress field's value.

func (*BGPPeer) SetAsn

func (s *BGPPeer) SetAsn(v int64) *BGPPeer

SetAsn sets the Asn field's value.

func (*BGPPeer) SetAuthKey

func (s *BGPPeer) SetAuthKey(v string) *BGPPeer

SetAuthKey sets the AuthKey field's value.

func (*BGPPeer) SetBgpPeerState

func (s *BGPPeer) SetBgpPeerState(v string) *BGPPeer

SetBgpPeerState sets the BgpPeerState field's value.

func (*BGPPeer) SetBgpStatus

func (s *BGPPeer) SetBgpStatus(v string) *BGPPeer

SetBgpStatus sets the BgpStatus field's value.

func (*BGPPeer) SetCustomerAddress

func (s *BGPPeer) SetCustomerAddress(v string) *BGPPeer

SetCustomerAddress sets the CustomerAddress field's value.

func (BGPPeer) String

func (s BGPPeer) String() string

String returns the string representation

type ConfirmConnectionInput

type ConfirmConnectionInput struct {

	// The ID of the connection. This field is also used as the ID type for operations
	// that use multiple connection types (LAG, interconnect, and/or connection).
	//
	// Example: dxcon-fg5678gh
	//
	// Default: None
	//
	// ConnectionId is a required field
	ConnectionId *string `locationName:"connectionId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Container for the parameters to the ConfirmConnection operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/ConfirmConnectionRequest

func (ConfirmConnectionInput) GoString

func (s ConfirmConnectionInput) GoString() string

GoString returns the string representation

func (*ConfirmConnectionInput) SetConnectionId

func (s *ConfirmConnectionInput) SetConnectionId(v string) *ConfirmConnectionInput

SetConnectionId sets the ConnectionId field's value.

func (ConfirmConnectionInput) String

func (s ConfirmConnectionInput) String() string

String returns the string representation

func (*ConfirmConnectionInput) Validate

func (s *ConfirmConnectionInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ConfirmConnectionOutput

type ConfirmConnectionOutput struct {

	// State of the connection.
	//
	//    * Ordering: The initial state of a hosted connection provisioned on an
	//    interconnect. The connection stays in the ordering state until the owner
	//    of the hosted connection confirms or declines the connection order.
	//
	//    * Requested: The initial state of a standard connection. The connection
	//    stays in the requested state until the Letter of Authorization (LOA) is
	//    sent to the customer.
	//
	//    * Pending: The connection has been approved, and is being initialized.
	//
	//    * Available: The network link is up, and the connection is ready for use.
	//
	//    * Down: The network link is down.
	//
	//    * Deleting: The connection is in the process of being deleted.
	//
	//    * Deleted: The connection has been deleted.
	//
	//    * Rejected: A hosted connection in the 'Ordering' state will enter the
	//    'Rejected' state if it is deleted by the end customer.
	ConnectionState *string `locationName:"connectionState" type:"string" enum:"ConnectionState"`
	// contains filtered or unexported fields
}

The response received when ConfirmConnection is called. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/ConfirmConnectionResponse

func (ConfirmConnectionOutput) GoString

func (s ConfirmConnectionOutput) GoString() string

GoString returns the string representation

func (*ConfirmConnectionOutput) SetConnectionState

func (s *ConfirmConnectionOutput) SetConnectionState(v string) *ConfirmConnectionOutput

SetConnectionState sets the ConnectionState field's value.

func (ConfirmConnectionOutput) String

func (s ConfirmConnectionOutput) String() string

String returns the string representation

type ConfirmPrivateVirtualInterfaceInput

type ConfirmPrivateVirtualInterfaceInput struct {

	// ID of the virtual private gateway that will be attached to the virtual interface.
	//
	// A virtual private gateway can be managed via the Amazon Virtual Private Cloud
	// (VPC) console or the EC2 CreateVpnGateway (http://docs.aws.amazon.com/AWSEC2/latest/APIReference/ApiReference-query-CreateVpnGateway.html)
	// action.
	//
	// Default: None
	//
	// VirtualGatewayId is a required field
	VirtualGatewayId *string `locationName:"virtualGatewayId" type:"string" required:"true"`

	// The ID of the virtual interface.
	//
	// Example: dxvif-123dfg56
	//
	// Default: None
	//
	// VirtualInterfaceId is a required field
	VirtualInterfaceId *string `locationName:"virtualInterfaceId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Container for the parameters to the ConfirmPrivateVirtualInterface operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/ConfirmPrivateVirtualInterfaceRequest

func (ConfirmPrivateVirtualInterfaceInput) GoString

GoString returns the string representation

func (*ConfirmPrivateVirtualInterfaceInput) SetVirtualGatewayId

SetVirtualGatewayId sets the VirtualGatewayId field's value.

func (*ConfirmPrivateVirtualInterfaceInput) SetVirtualInterfaceId

SetVirtualInterfaceId sets the VirtualInterfaceId field's value.

func (ConfirmPrivateVirtualInterfaceInput) String

String returns the string representation

func (*ConfirmPrivateVirtualInterfaceInput) Validate

Validate inspects the fields of the type to determine if they are valid.

type ConfirmPrivateVirtualInterfaceOutput

type ConfirmPrivateVirtualInterfaceOutput struct {

	// State of the virtual interface.
	//
	//    * Confirming: The creation of the virtual interface is pending confirmation
	//    from the virtual interface owner. If the owner of the virtual interface
	//    is different from the owner of the connection on which it is provisioned,
	//    then the virtual interface will remain in this state until it is confirmed
	//    by the virtual interface owner.
	//
	//    * Verifying: This state only applies to public virtual interfaces. Each
	//    public virtual interface needs validation before the virtual interface
	//    can be created.
	//
	//    * Pending: A virtual interface is in this state from the time that it
	//    is created until the virtual interface is ready to forward traffic.
	//
	//    * Available: A virtual interface that is able to forward traffic.
	//
	//    * Down: A virtual interface that is BGP down.
	//
	//    * Deleting: A virtual interface is in this state immediately after calling
	//    DeleteVirtualInterface until it can no longer forward traffic.
	//
	//    * Deleted: A virtual interface that cannot forward traffic.
	//
	//    * Rejected: The virtual interface owner has declined creation of the virtual
	//    interface. If a virtual interface in the 'Confirming' state is deleted
	//    by the virtual interface owner, the virtual interface will enter the 'Rejected'
	//    state.
	VirtualInterfaceState *string `locationName:"virtualInterfaceState" type:"string" enum:"VirtualInterfaceState"`
	// contains filtered or unexported fields
}

The response received when ConfirmPrivateVirtualInterface is called. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/ConfirmPrivateVirtualInterfaceResponse

func (ConfirmPrivateVirtualInterfaceOutput) GoString

GoString returns the string representation

func (*ConfirmPrivateVirtualInterfaceOutput) SetVirtualInterfaceState

SetVirtualInterfaceState sets the VirtualInterfaceState field's value.

func (ConfirmPrivateVirtualInterfaceOutput) String

String returns the string representation

type ConfirmPublicVirtualInterfaceInput

type ConfirmPublicVirtualInterfaceInput struct {

	// The ID of the virtual interface.
	//
	// Example: dxvif-123dfg56
	//
	// Default: None
	//
	// VirtualInterfaceId is a required field
	VirtualInterfaceId *string `locationName:"virtualInterfaceId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Container for the parameters to the ConfirmPublicVirtualInterface operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/ConfirmPublicVirtualInterfaceRequest

func (ConfirmPublicVirtualInterfaceInput) GoString

GoString returns the string representation

func (*ConfirmPublicVirtualInterfaceInput) SetVirtualInterfaceId

SetVirtualInterfaceId sets the VirtualInterfaceId field's value.

func (ConfirmPublicVirtualInterfaceInput) String

String returns the string representation

func (*ConfirmPublicVirtualInterfaceInput) Validate

Validate inspects the fields of the type to determine if they are valid.

type ConfirmPublicVirtualInterfaceOutput

type ConfirmPublicVirtualInterfaceOutput struct {

	// State of the virtual interface.
	//
	//    * Confirming: The creation of the virtual interface is pending confirmation
	//    from the virtual interface owner. If the owner of the virtual interface
	//    is different from the owner of the connection on which it is provisioned,
	//    then the virtual interface will remain in this state until it is confirmed
	//    by the virtual interface owner.
	//
	//    * Verifying: This state only applies to public virtual interfaces. Each
	//    public virtual interface needs validation before the virtual interface
	//    can be created.
	//
	//    * Pending: A virtual interface is in this state from the time that it
	//    is created until the virtual interface is ready to forward traffic.
	//
	//    * Available: A virtual interface that is able to forward traffic.
	//
	//    * Down: A virtual interface that is BGP down.
	//
	//    * Deleting: A virtual interface is in this state immediately after calling
	//    DeleteVirtualInterface until it can no longer forward traffic.
	//
	//    * Deleted: A virtual interface that cannot forward traffic.
	//
	//    * Rejected: The virtual interface owner has declined creation of the virtual
	//    interface. If a virtual interface in the 'Confirming' state is deleted
	//    by the virtual interface owner, the virtual interface will enter the 'Rejected'
	//    state.
	VirtualInterfaceState *string `locationName:"virtualInterfaceState" type:"string" enum:"VirtualInterfaceState"`
	// contains filtered or unexported fields
}

The response received when ConfirmPublicVirtualInterface is called. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/ConfirmPublicVirtualInterfaceResponse

func (ConfirmPublicVirtualInterfaceOutput) GoString

GoString returns the string representation

func (*ConfirmPublicVirtualInterfaceOutput) SetVirtualInterfaceState

SetVirtualInterfaceState sets the VirtualInterfaceState field's value.

func (ConfirmPublicVirtualInterfaceOutput) String

String returns the string representation

type Connection

type Connection struct {

	// The Direct Connection endpoint which the physical connection terminates on.
	AwsDevice *string `locationName:"awsDevice" type:"string"`

	// Bandwidth of the connection.
	//
	// Example: 1Gbps (for regular connections), or 500Mbps (for hosted connections)
	//
	// Default: None
	Bandwidth *string `locationName:"bandwidth" type:"string"`

	// The ID of the connection. This field is also used as the ID type for operations
	// that use multiple connection types (LAG, interconnect, and/or connection).
	//
	// Example: dxcon-fg5678gh
	//
	// Default: None
	ConnectionId *string `locationName:"connectionId" type:"string"`

	// The name of the connection.
	//
	// Example: "My Connection to AWS"
	//
	// Default: None
	ConnectionName *string `locationName:"connectionName" type:"string"`

	// State of the connection.
	//
	//    * Ordering: The initial state of a hosted connection provisioned on an
	//    interconnect. The connection stays in the ordering state until the owner
	//    of the hosted connection confirms or declines the connection order.
	//
	//    * Requested: The initial state of a standard connection. The connection
	//    stays in the requested state until the Letter of Authorization (LOA) is
	//    sent to the customer.
	//
	//    * Pending: The connection has been approved, and is being initialized.
	//
	//    * Available: The network link is up, and the connection is ready for use.
	//
	//    * Down: The network link is down.
	//
	//    * Deleting: The connection is in the process of being deleted.
	//
	//    * Deleted: The connection has been deleted.
	//
	//    * Rejected: A hosted connection in the 'Ordering' state will enter the
	//    'Rejected' state if it is deleted by the end customer.
	ConnectionState *string `locationName:"connectionState" type:"string" enum:"ConnectionState"`

	// The ID of the LAG.
	//
	// Example: dxlag-fg5678gh
	LagId *string `locationName:"lagId" type:"string"`

	// The time of the most recent call to DescribeLoa for this connection.
	LoaIssueTime *time.Time `locationName:"loaIssueTime" type:"timestamp" timestampFormat:"unix"`

	// Where the connection is located.
	//
	// Example: EqSV5
	//
	// Default: None
	Location *string `locationName:"location" type:"string"`

	// The AWS account that will own the new connection.
	OwnerAccount *string `locationName:"ownerAccount" type:"string"`

	// The name of the AWS Direct Connect service provider associated with the connection.
	PartnerName *string `locationName:"partnerName" type:"string"`

	// The AWS region where the connection is located.
	//
	// Example: us-east-1
	//
	// Default: None
	Region *string `locationName:"region" type:"string"`

	// The VLAN ID.
	//
	// Example: 101
	Vlan *int64 `locationName:"vlan" type:"integer"`
	// contains filtered or unexported fields
}

A connection represents the physical network connection between the AWS Direct Connect location and the customer. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/Connection

func (Connection) GoString

func (s Connection) GoString() string

GoString returns the string representation

func (*Connection) SetAwsDevice

func (s *Connection) SetAwsDevice(v string) *Connection

SetAwsDevice sets the AwsDevice field's value.

func (*Connection) SetBandwidth

func (s *Connection) SetBandwidth(v string) *Connection

SetBandwidth sets the Bandwidth field's value.

func (*Connection) SetConnectionId

func (s *Connection) SetConnectionId(v string) *Connection

SetConnectionId sets the ConnectionId field's value.

func (*Connection) SetConnectionName

func (s *Connection) SetConnectionName(v string) *Connection

SetConnectionName sets the ConnectionName field's value.

func (*Connection) SetConnectionState

func (s *Connection) SetConnectionState(v string) *Connection

SetConnectionState sets the ConnectionState field's value.

func (*Connection) SetLagId

func (s *Connection) SetLagId(v string) *Connection

SetLagId sets the LagId field's value.

func (*Connection) SetLoaIssueTime

func (s *Connection) SetLoaIssueTime(v time.Time) *Connection

SetLoaIssueTime sets the LoaIssueTime field's value.

func (*Connection) SetLocation

func (s *Connection) SetLocation(v string) *Connection

SetLocation sets the Location field's value.

func (*Connection) SetOwnerAccount

func (s *Connection) SetOwnerAccount(v string) *Connection

SetOwnerAccount sets the OwnerAccount field's value.

func (*Connection) SetPartnerName

func (s *Connection) SetPartnerName(v string) *Connection

SetPartnerName sets the PartnerName field's value.

func (*Connection) SetRegion

func (s *Connection) SetRegion(v string) *Connection

SetRegion sets the Region field's value.

func (*Connection) SetVlan

func (s *Connection) SetVlan(v int64) *Connection

SetVlan sets the Vlan field's value.

func (Connection) String

func (s Connection) String() string

String returns the string representation

type Connections

type Connections struct {

	// A list of connections.
	Connections []*Connection `locationName:"connections" type:"list"`
	// contains filtered or unexported fields
}

A structure containing a list of connections. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/Connections

func (Connections) GoString

func (s Connections) GoString() string

GoString returns the string representation

func (*Connections) SetConnections

func (s *Connections) SetConnections(v []*Connection) *Connections

SetConnections sets the Connections field's value.

func (Connections) String

func (s Connections) String() string

String returns the string representation

type CreateBGPPeerInput

type CreateBGPPeerInput struct {

	// Detailed information for the BGP peer to be created.
	//
	// Default: None
	NewBGPPeer *NewBGPPeer `locationName:"newBGPPeer" type:"structure"`

	// The ID of the virtual interface on which the BGP peer will be provisioned.
	//
	// Example: dxvif-456abc78
	//
	// Default: None
	VirtualInterfaceId *string `locationName:"virtualInterfaceId" type:"string"`
	// contains filtered or unexported fields
}

Container for the parameters to the CreateBGPPeer operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/CreateBGPPeerRequest

func (CreateBGPPeerInput) GoString

func (s CreateBGPPeerInput) GoString() string

GoString returns the string representation

func (*CreateBGPPeerInput) SetNewBGPPeer

func (s *CreateBGPPeerInput) SetNewBGPPeer(v *NewBGPPeer) *CreateBGPPeerInput

SetNewBGPPeer sets the NewBGPPeer field's value.

func (*CreateBGPPeerInput) SetVirtualInterfaceId

func (s *CreateBGPPeerInput) SetVirtualInterfaceId(v string) *CreateBGPPeerInput

SetVirtualInterfaceId sets the VirtualInterfaceId field's value.

func (CreateBGPPeerInput) String

func (s CreateBGPPeerInput) String() string

String returns the string representation

type CreateBGPPeerOutput

type CreateBGPPeerOutput struct {

	// A virtual interface (VLAN) transmits the traffic between the AWS Direct Connect
	// location and the customer.
	VirtualInterface *VirtualInterface `locationName:"virtualInterface" type:"structure"`
	// contains filtered or unexported fields
}

The response received when CreateBGPPeer is called. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/CreateBGPPeerResponse

func (CreateBGPPeerOutput) GoString

func (s CreateBGPPeerOutput) GoString() string

GoString returns the string representation

func (*CreateBGPPeerOutput) SetVirtualInterface

func (s *CreateBGPPeerOutput) SetVirtualInterface(v *VirtualInterface) *CreateBGPPeerOutput

SetVirtualInterface sets the VirtualInterface field's value.

func (CreateBGPPeerOutput) String

func (s CreateBGPPeerOutput) String() string

String returns the string representation

type CreateConnectionInput

type CreateConnectionInput struct {

	// Bandwidth of the connection.
	//
	// Example: 1Gbps
	//
	// Default: None
	//
	// Bandwidth is a required field
	Bandwidth *string `locationName:"bandwidth" type:"string" required:"true"`

	// The name of the connection.
	//
	// Example: "My Connection to AWS"
	//
	// Default: None
	//
	// ConnectionName is a required field
	ConnectionName *string `locationName:"connectionName" type:"string" required:"true"`

	// The ID of the LAG.
	//
	// Example: dxlag-fg5678gh
	LagId *string `locationName:"lagId" type:"string"`

	// Where the connection is located.
	//
	// Example: EqSV5
	//
	// Default: None
	//
	// Location is a required field
	Location *string `locationName:"location" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Container for the parameters to the CreateConnection operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/CreateConnectionRequest

func (CreateConnectionInput) GoString

func (s CreateConnectionInput) GoString() string

GoString returns the string representation

func (*CreateConnectionInput) SetBandwidth

SetBandwidth sets the Bandwidth field's value.

func (*CreateConnectionInput) SetConnectionName

func (s *CreateConnectionInput) SetConnectionName(v string) *CreateConnectionInput

SetConnectionName sets the ConnectionName field's value.

func (*CreateConnectionInput) SetLagId

SetLagId sets the LagId field's value.

func (*CreateConnectionInput) SetLocation

SetLocation sets the Location field's value.

func (CreateConnectionInput) String

func (s CreateConnectionInput) String() string

String returns the string representation

func (*CreateConnectionInput) Validate

func (s *CreateConnectionInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateInterconnectInput

type CreateInterconnectInput struct {

	// The port bandwidth
	//
	// Example: 1Gbps
	//
	// Default: None
	//
	// Available values: 1Gbps,10Gbps
	//
	// Bandwidth is a required field
	Bandwidth *string `locationName:"bandwidth" type:"string" required:"true"`

	// The name of the interconnect.
	//
	// Example: "1G Interconnect to AWS"
	//
	// Default: None
	//
	// InterconnectName is a required field
	InterconnectName *string `locationName:"interconnectName" type:"string" required:"true"`

	// The ID of the LAG.
	//
	// Example: dxlag-fg5678gh
	LagId *string `locationName:"lagId" type:"string"`

	// Where the interconnect is located
	//
	// Example: EqSV5
	//
	// Default: None
	//
	// Location is a required field
	Location *string `locationName:"location" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Container for the parameters to the CreateInterconnect operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/CreateInterconnectRequest

func (CreateInterconnectInput) GoString

func (s CreateInterconnectInput) GoString() string

GoString returns the string representation

func (*CreateInterconnectInput) SetBandwidth

SetBandwidth sets the Bandwidth field's value.

func (*CreateInterconnectInput) SetInterconnectName

func (s *CreateInterconnectInput) SetInterconnectName(v string) *CreateInterconnectInput

SetInterconnectName sets the InterconnectName field's value.

func (*CreateInterconnectInput) SetLagId

SetLagId sets the LagId field's value.

func (*CreateInterconnectInput) SetLocation

SetLocation sets the Location field's value.

func (CreateInterconnectInput) String

func (s CreateInterconnectInput) String() string

String returns the string representation

func (*CreateInterconnectInput) Validate

func (s *CreateInterconnectInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateLagInput

type CreateLagInput struct {

	// The ID of an existing connection to migrate to the LAG.
	//
	// Default: None
	ConnectionId *string `locationName:"connectionId" type:"string"`

	// The bandwidth of the individual physical connections bundled by the LAG.
	//
	// Default: None
	//
	// Available values: 1Gbps, 10Gbps
	//
	// ConnectionsBandwidth is a required field
	ConnectionsBandwidth *string `locationName:"connectionsBandwidth" type:"string" required:"true"`

	// The name of the LAG.
	//
	// Example: "3x10G LAG to AWS"
	//
	// Default: None
	//
	// LagName is a required field
	LagName *string `locationName:"lagName" type:"string" required:"true"`

	// The AWS Direct Connect location in which the LAG should be allocated.
	//
	// Example: EqSV5
	//
	// Default: None
	//
	// Location is a required field
	Location *string `locationName:"location" type:"string" required:"true"`

	// The number of physical connections initially provisioned and bundled by the
	// LAG.
	//
	// Default: None
	//
	// NumberOfConnections is a required field
	NumberOfConnections *int64 `locationName:"numberOfConnections" type:"integer" required:"true"`
	// contains filtered or unexported fields
}

Container for the parameters to the CreateLag operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/CreateLagRequest

func (CreateLagInput) GoString

func (s CreateLagInput) GoString() string

GoString returns the string representation

func (*CreateLagInput) SetConnectionId

func (s *CreateLagInput) SetConnectionId(v string) *CreateLagInput

SetConnectionId sets the ConnectionId field's value.

func (*CreateLagInput) SetConnectionsBandwidth

func (s *CreateLagInput) SetConnectionsBandwidth(v string) *CreateLagInput

SetConnectionsBandwidth sets the ConnectionsBandwidth field's value.

func (*CreateLagInput) SetLagName

func (s *CreateLagInput) SetLagName(v string) *CreateLagInput

SetLagName sets the LagName field's value.

func (*CreateLagInput) SetLocation

func (s *CreateLagInput) SetLocation(v string) *CreateLagInput

SetLocation sets the Location field's value.

func (*CreateLagInput) SetNumberOfConnections

func (s *CreateLagInput) SetNumberOfConnections(v int64) *CreateLagInput

SetNumberOfConnections sets the NumberOfConnections field's value.

func (CreateLagInput) String

func (s CreateLagInput) String() string

String returns the string representation

func (*CreateLagInput) Validate

func (s *CreateLagInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreatePrivateVirtualInterfaceInput

type CreatePrivateVirtualInterfaceInput struct {

	// The ID of the connection. This field is also used as the ID type for operations
	// that use multiple connection types (LAG, interconnect, and/or connection).
	//
	// Example: dxcon-fg5678gh
	//
	// Default: None
	//
	// ConnectionId is a required field
	ConnectionId *string `locationName:"connectionId" type:"string" required:"true"`

	// Detailed information for the private virtual interface to be created.
	//
	// Default: None
	//
	// NewPrivateVirtualInterface is a required field
	NewPrivateVirtualInterface *NewPrivateVirtualInterface `locationName:"newPrivateVirtualInterface" type:"structure" required:"true"`
	// contains filtered or unexported fields
}

Container for the parameters to the CreatePrivateVirtualInterface operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/CreatePrivateVirtualInterfaceRequest

func (CreatePrivateVirtualInterfaceInput) GoString

GoString returns the string representation

func (*CreatePrivateVirtualInterfaceInput) SetConnectionId

SetConnectionId sets the ConnectionId field's value.

func (*CreatePrivateVirtualInterfaceInput) SetNewPrivateVirtualInterface

SetNewPrivateVirtualInterface sets the NewPrivateVirtualInterface field's value.

func (CreatePrivateVirtualInterfaceInput) String

String returns the string representation

func (*CreatePrivateVirtualInterfaceInput) Validate

Validate inspects the fields of the type to determine if they are valid.

type CreatePublicVirtualInterfaceInput

type CreatePublicVirtualInterfaceInput struct {

	// The ID of the connection. This field is also used as the ID type for operations
	// that use multiple connection types (LAG, interconnect, and/or connection).
	//
	// Example: dxcon-fg5678gh
	//
	// Default: None
	//
	// ConnectionId is a required field
	ConnectionId *string `locationName:"connectionId" type:"string" required:"true"`

	// Detailed information for the public virtual interface to be created.
	//
	// Default: None
	//
	// NewPublicVirtualInterface is a required field
	NewPublicVirtualInterface *NewPublicVirtualInterface `locationName:"newPublicVirtualInterface" type:"structure" required:"true"`
	// contains filtered or unexported fields
}

Container for the parameters to the CreatePublicVirtualInterface operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/CreatePublicVirtualInterfaceRequest

func (CreatePublicVirtualInterfaceInput) GoString

GoString returns the string representation

func (*CreatePublicVirtualInterfaceInput) SetConnectionId

SetConnectionId sets the ConnectionId field's value.

func (*CreatePublicVirtualInterfaceInput) SetNewPublicVirtualInterface

SetNewPublicVirtualInterface sets the NewPublicVirtualInterface field's value.

func (CreatePublicVirtualInterfaceInput) String

String returns the string representation

func (*CreatePublicVirtualInterfaceInput) Validate

Validate inspects the fields of the type to determine if they are valid.

type DeleteBGPPeerInput

type DeleteBGPPeerInput struct {

	// The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
	//
	// Example: 65000
	Asn *int64 `locationName:"asn" type:"integer"`

	// IP address assigned to the customer interface.
	//
	// Example: 192.168.1.2/30 or 2001:db8::2/125
	CustomerAddress *string `locationName:"customerAddress" type:"string"`

	// The ID of the virtual interface from which the BGP peer will be deleted.
	//
	// Example: dxvif-456abc78
	//
	// Default: None
	VirtualInterfaceId *string `locationName:"virtualInterfaceId" type:"string"`
	// contains filtered or unexported fields
}

Container for the parameters to the DeleteBGPPeer operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DeleteBGPPeerRequest

func (DeleteBGPPeerInput) GoString

func (s DeleteBGPPeerInput) GoString() string

GoString returns the string representation

func (*DeleteBGPPeerInput) SetAsn

SetAsn sets the Asn field's value.

func (*DeleteBGPPeerInput) SetCustomerAddress

func (s *DeleteBGPPeerInput) SetCustomerAddress(v string) *DeleteBGPPeerInput

SetCustomerAddress sets the CustomerAddress field's value.

func (*DeleteBGPPeerInput) SetVirtualInterfaceId

func (s *DeleteBGPPeerInput) SetVirtualInterfaceId(v string) *DeleteBGPPeerInput

SetVirtualInterfaceId sets the VirtualInterfaceId field's value.

func (DeleteBGPPeerInput) String

func (s DeleteBGPPeerInput) String() string

String returns the string representation

type DeleteBGPPeerOutput

type DeleteBGPPeerOutput struct {

	// A virtual interface (VLAN) transmits the traffic between the AWS Direct Connect
	// location and the customer.
	VirtualInterface *VirtualInterface `locationName:"virtualInterface" type:"structure"`
	// contains filtered or unexported fields
}

The response received when DeleteBGPPeer is called. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DeleteBGPPeerResponse

func (DeleteBGPPeerOutput) GoString

func (s DeleteBGPPeerOutput) GoString() string

GoString returns the string representation

func (*DeleteBGPPeerOutput) SetVirtualInterface

func (s *DeleteBGPPeerOutput) SetVirtualInterface(v *VirtualInterface) *DeleteBGPPeerOutput

SetVirtualInterface sets the VirtualInterface field's value.

func (DeleteBGPPeerOutput) String

func (s DeleteBGPPeerOutput) String() string

String returns the string representation

type DeleteConnectionInput

type DeleteConnectionInput struct {

	// The ID of the connection. This field is also used as the ID type for operations
	// that use multiple connection types (LAG, interconnect, and/or connection).
	//
	// Example: dxcon-fg5678gh
	//
	// Default: None
	//
	// ConnectionId is a required field
	ConnectionId *string `locationName:"connectionId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Container for the parameters to the DeleteConnection operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DeleteConnectionRequest

func (DeleteConnectionInput) GoString

func (s DeleteConnectionInput) GoString() string

GoString returns the string representation

func (*DeleteConnectionInput) SetConnectionId

func (s *DeleteConnectionInput) SetConnectionId(v string) *DeleteConnectionInput

SetConnectionId sets the ConnectionId field's value.

func (DeleteConnectionInput) String

func (s DeleteConnectionInput) String() string

String returns the string representation

func (*DeleteConnectionInput) Validate

func (s *DeleteConnectionInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteInterconnectInput

type DeleteInterconnectInput struct {

	// The ID of the interconnect.
	//
	// Example: dxcon-abc123
	//
	// InterconnectId is a required field
	InterconnectId *string `locationName:"interconnectId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Container for the parameters to the DeleteInterconnect operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DeleteInterconnectRequest

func (DeleteInterconnectInput) GoString

func (s DeleteInterconnectInput) GoString() string

GoString returns the string representation

func (*DeleteInterconnectInput) SetInterconnectId

func (s *DeleteInterconnectInput) SetInterconnectId(v string) *DeleteInterconnectInput

SetInterconnectId sets the InterconnectId field's value.

func (DeleteInterconnectInput) String

func (s DeleteInterconnectInput) String() string

String returns the string representation

func (*DeleteInterconnectInput) Validate

func (s *DeleteInterconnectInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteInterconnectOutput

type DeleteInterconnectOutput struct {

	// State of the interconnect.
	//
	//    * Requested: The initial state of an interconnect. The interconnect stays
	//    in the requested state until the Letter of Authorization (LOA) is sent
	//    to the customer.
	//
	//    * Pending: The interconnect has been approved, and is being initialized.
	//
	//    * Available: The network link is up, and the interconnect is ready for
	//    use.
	//
	//    * Down: The network link is down.
	//
	//    * Deleting: The interconnect is in the process of being deleted.
	//
	//    * Deleted: The interconnect has been deleted.
	InterconnectState *string `locationName:"interconnectState" type:"string" enum:"InterconnectState"`
	// contains filtered or unexported fields
}

The response received when DeleteInterconnect is called. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DeleteInterconnectResponse

func (DeleteInterconnectOutput) GoString

func (s DeleteInterconnectOutput) GoString() string

GoString returns the string representation

func (*DeleteInterconnectOutput) SetInterconnectState

func (s *DeleteInterconnectOutput) SetInterconnectState(v string) *DeleteInterconnectOutput

SetInterconnectState sets the InterconnectState field's value.

func (DeleteInterconnectOutput) String

func (s DeleteInterconnectOutput) String() string

String returns the string representation

type DeleteLagInput

type DeleteLagInput struct {

	// The ID of the LAG to delete.
	//
	// Example: dxlag-abc123
	//
	// Default: None
	//
	// LagId is a required field
	LagId *string `locationName:"lagId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Container for the parameters to the DeleteLag operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DeleteLagRequest

func (DeleteLagInput) GoString

func (s DeleteLagInput) GoString() string

GoString returns the string representation

func (*DeleteLagInput) SetLagId

func (s *DeleteLagInput) SetLagId(v string) *DeleteLagInput

SetLagId sets the LagId field's value.

func (DeleteLagInput) String

func (s DeleteLagInput) String() string

String returns the string representation

func (*DeleteLagInput) Validate

func (s *DeleteLagInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteVirtualInterfaceInput

type DeleteVirtualInterfaceInput struct {

	// The ID of the virtual interface.
	//
	// Example: dxvif-123dfg56
	//
	// Default: None
	//
	// VirtualInterfaceId is a required field
	VirtualInterfaceId *string `locationName:"virtualInterfaceId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Container for the parameters to the DeleteVirtualInterface operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DeleteVirtualInterfaceRequest

func (DeleteVirtualInterfaceInput) GoString

func (s DeleteVirtualInterfaceInput) GoString() string

GoString returns the string representation

func (*DeleteVirtualInterfaceInput) SetVirtualInterfaceId

func (s *DeleteVirtualInterfaceInput) SetVirtualInterfaceId(v string) *DeleteVirtualInterfaceInput

SetVirtualInterfaceId sets the VirtualInterfaceId field's value.

func (DeleteVirtualInterfaceInput) String

String returns the string representation

func (*DeleteVirtualInterfaceInput) Validate

func (s *DeleteVirtualInterfaceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteVirtualInterfaceOutput

type DeleteVirtualInterfaceOutput struct {

	// State of the virtual interface.
	//
	//    * Confirming: The creation of the virtual interface is pending confirmation
	//    from the virtual interface owner. If the owner of the virtual interface
	//    is different from the owner of the connection on which it is provisioned,
	//    then the virtual interface will remain in this state until it is confirmed
	//    by the virtual interface owner.
	//
	//    * Verifying: This state only applies to public virtual interfaces. Each
	//    public virtual interface needs validation before the virtual interface
	//    can be created.
	//
	//    * Pending: A virtual interface is in this state from the time that it
	//    is created until the virtual interface is ready to forward traffic.
	//
	//    * Available: A virtual interface that is able to forward traffic.
	//
	//    * Down: A virtual interface that is BGP down.
	//
	//    * Deleting: A virtual interface is in this state immediately after calling
	//    DeleteVirtualInterface until it can no longer forward traffic.
	//
	//    * Deleted: A virtual interface that cannot forward traffic.
	//
	//    * Rejected: The virtual interface owner has declined creation of the virtual
	//    interface. If a virtual interface in the 'Confirming' state is deleted
	//    by the virtual interface owner, the virtual interface will enter the 'Rejected'
	//    state.
	VirtualInterfaceState *string `locationName:"virtualInterfaceState" type:"string" enum:"VirtualInterfaceState"`
	// contains filtered or unexported fields
}

The response received when DeleteVirtualInterface is called. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DeleteVirtualInterfaceResponse

func (DeleteVirtualInterfaceOutput) GoString

func (s DeleteVirtualInterfaceOutput) GoString() string

GoString returns the string representation

func (*DeleteVirtualInterfaceOutput) SetVirtualInterfaceState

func (s *DeleteVirtualInterfaceOutput) SetVirtualInterfaceState(v string) *DeleteVirtualInterfaceOutput

SetVirtualInterfaceState sets the VirtualInterfaceState field's value.

func (DeleteVirtualInterfaceOutput) String

String returns the string representation

type DescribeConnectionLoaInput

type DescribeConnectionLoaInput struct {

	// The ID of the connection. This field is also used as the ID type for operations
	// that use multiple connection types (LAG, interconnect, and/or connection).
	//
	// Example: dxcon-fg5678gh
	//
	// Default: None
	//
	// ConnectionId is a required field
	ConnectionId *string `locationName:"connectionId" type:"string" required:"true"`

	// A standard media type indicating the content type of the LOA-CFA document.
	// Currently, the only supported value is "application/pdf".
	//
	// Default: application/pdf
	LoaContentType *string `locationName:"loaContentType" type:"string" enum:"LoaContentType"`

	// The name of the APN partner or service provider who establishes connectivity
	// on your behalf. If you supply this parameter, the LOA-CFA lists the provider
	// name alongside your company name as the requester of the cross connect.
	//
	// Default: None
	ProviderName *string `locationName:"providerName" type:"string"`
	// contains filtered or unexported fields
}

Container for the parameters to the DescribeConnectionLoa operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeConnectionLoaRequest

func (DescribeConnectionLoaInput) GoString

func (s DescribeConnectionLoaInput) GoString() string

GoString returns the string representation

func (*DescribeConnectionLoaInput) SetConnectionId

SetConnectionId sets the ConnectionId field's value.

func (*DescribeConnectionLoaInput) SetLoaContentType

SetLoaContentType sets the LoaContentType field's value.

func (*DescribeConnectionLoaInput) SetProviderName

SetProviderName sets the ProviderName field's value.

func (DescribeConnectionLoaInput) String

String returns the string representation

func (*DescribeConnectionLoaInput) Validate

func (s *DescribeConnectionLoaInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeConnectionLoaOutput

type DescribeConnectionLoaOutput struct {

	// A structure containing the Letter of Authorization - Connecting Facility
	// Assignment (LOA-CFA) for a connection.
	Loa *Loa `locationName:"loa" type:"structure"`
	// contains filtered or unexported fields
}

The response received when DescribeConnectionLoa is called. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeConnectionLoaResponse

func (DescribeConnectionLoaOutput) GoString

func (s DescribeConnectionLoaOutput) GoString() string

GoString returns the string representation

func (*DescribeConnectionLoaOutput) SetLoa

SetLoa sets the Loa field's value.

func (DescribeConnectionLoaOutput) String

String returns the string representation

type DescribeConnectionsInput

type DescribeConnectionsInput struct {

	// The ID of the connection. This field is also used as the ID type for operations
	// that use multiple connection types (LAG, interconnect, and/or connection).
	//
	// Example: dxcon-fg5678gh
	//
	// Default: None
	ConnectionId *string `locationName:"connectionId" type:"string"`
	// contains filtered or unexported fields
}

Container for the parameters to the DescribeConnections operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeConnectionsRequest

func (DescribeConnectionsInput) GoString

func (s DescribeConnectionsInput) GoString() string

GoString returns the string representation

func (*DescribeConnectionsInput) SetConnectionId

SetConnectionId sets the ConnectionId field's value.

func (DescribeConnectionsInput) String

func (s DescribeConnectionsInput) String() string

String returns the string representation

type DescribeConnectionsOnInterconnectInput

type DescribeConnectionsOnInterconnectInput struct {

	// ID of the interconnect on which a list of connection is provisioned.
	//
	// Example: dxcon-abc123
	//
	// Default: None
	//
	// InterconnectId is a required field
	InterconnectId *string `locationName:"interconnectId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Container for the parameters to the DescribeConnectionsOnInterconnect operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeConnectionsOnInterconnectRequest

func (DescribeConnectionsOnInterconnectInput) GoString

GoString returns the string representation

func (*DescribeConnectionsOnInterconnectInput) SetInterconnectId

SetInterconnectId sets the InterconnectId field's value.

func (DescribeConnectionsOnInterconnectInput) String

String returns the string representation

func (*DescribeConnectionsOnInterconnectInput) Validate

Validate inspects the fields of the type to determine if they are valid.

type DescribeHostedConnectionsInput

type DescribeHostedConnectionsInput struct {

	// The ID of the interconnect or LAG on which the hosted connections are provisioned.
	//
	// Example: dxcon-abc123 or dxlag-abc123
	//
	// Default: None
	//
	// ConnectionId is a required field
	ConnectionId *string `locationName:"connectionId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Container for the parameters to the DescribeHostedConnections operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeHostedConnectionsRequest

func (DescribeHostedConnectionsInput) GoString

GoString returns the string representation

func (*DescribeHostedConnectionsInput) SetConnectionId

SetConnectionId sets the ConnectionId field's value.

func (DescribeHostedConnectionsInput) String

String returns the string representation

func (*DescribeHostedConnectionsInput) Validate

func (s *DescribeHostedConnectionsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeInterconnectLoaInput

type DescribeInterconnectLoaInput struct {

	// The ID of the interconnect.
	//
	// Example: dxcon-abc123
	//
	// InterconnectId is a required field
	InterconnectId *string `locationName:"interconnectId" type:"string" required:"true"`

	// A standard media type indicating the content type of the LOA-CFA document.
	// Currently, the only supported value is "application/pdf".
	//
	// Default: application/pdf
	LoaContentType *string `locationName:"loaContentType" type:"string" enum:"LoaContentType"`

	// The name of the service provider who establishes connectivity on your behalf.
	// If you supply this parameter, the LOA-CFA lists the provider name alongside
	// your company name as the requester of the cross connect.
	//
	// Default: None
	ProviderName *string `locationName:"providerName" type:"string"`
	// contains filtered or unexported fields
}

Container for the parameters to the DescribeInterconnectLoa operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeInterconnectLoaRequest

func (DescribeInterconnectLoaInput) GoString

func (s DescribeInterconnectLoaInput) GoString() string

GoString returns the string representation

func (*DescribeInterconnectLoaInput) SetInterconnectId

SetInterconnectId sets the InterconnectId field's value.

func (*DescribeInterconnectLoaInput) SetLoaContentType

SetLoaContentType sets the LoaContentType field's value.

func (*DescribeInterconnectLoaInput) SetProviderName

SetProviderName sets the ProviderName field's value.

func (DescribeInterconnectLoaInput) String

String returns the string representation

func (*DescribeInterconnectLoaInput) Validate

func (s *DescribeInterconnectLoaInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeInterconnectLoaOutput

type DescribeInterconnectLoaOutput struct {

	// A structure containing the Letter of Authorization - Connecting Facility
	// Assignment (LOA-CFA) for a connection.
	Loa *Loa `locationName:"loa" type:"structure"`
	// contains filtered or unexported fields
}

The response received when DescribeInterconnectLoa is called. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeInterconnectLoaResponse

func (DescribeInterconnectLoaOutput) GoString

GoString returns the string representation

func (*DescribeInterconnectLoaOutput) SetLoa

SetLoa sets the Loa field's value.

func (DescribeInterconnectLoaOutput) String

String returns the string representation

type DescribeInterconnectsInput

type DescribeInterconnectsInput struct {

	// The ID of the interconnect.
	//
	// Example: dxcon-abc123
	InterconnectId *string `locationName:"interconnectId" type:"string"`
	// contains filtered or unexported fields
}

Container for the parameters to the DescribeInterconnects operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeInterconnectsRequest

func (DescribeInterconnectsInput) GoString

func (s DescribeInterconnectsInput) GoString() string

GoString returns the string representation

func (*DescribeInterconnectsInput) SetInterconnectId

SetInterconnectId sets the InterconnectId field's value.

func (DescribeInterconnectsInput) String

String returns the string representation

type DescribeInterconnectsOutput

type DescribeInterconnectsOutput struct {

	// A list of interconnects.
	Interconnects []*Interconnect `locationName:"interconnects" type:"list"`
	// contains filtered or unexported fields
}

A structure containing a list of interconnects. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/Interconnects

func (DescribeInterconnectsOutput) GoString

func (s DescribeInterconnectsOutput) GoString() string

GoString returns the string representation

func (*DescribeInterconnectsOutput) SetInterconnects

SetInterconnects sets the Interconnects field's value.

func (DescribeInterconnectsOutput) String

String returns the string representation

type DescribeLagsInput

type DescribeLagsInput struct {

	// The ID of the LAG.
	//
	// Example: dxlag-abc123
	//
	// Default: None
	LagId *string `locationName:"lagId" type:"string"`
	// contains filtered or unexported fields
}

Container for the parameters to the DescribeLags operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeLagsRequest

func (DescribeLagsInput) GoString

func (s DescribeLagsInput) GoString() string

GoString returns the string representation

func (*DescribeLagsInput) SetLagId

func (s *DescribeLagsInput) SetLagId(v string) *DescribeLagsInput

SetLagId sets the LagId field's value.

func (DescribeLagsInput) String

func (s DescribeLagsInput) String() string

String returns the string representation

type DescribeLagsOutput

type DescribeLagsOutput struct {

	// A list of LAGs.
	Lags []*Lag `locationName:"lags" type:"list"`
	// contains filtered or unexported fields
}

A structure containing a list of LAGs. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/Lags

func (DescribeLagsOutput) GoString

func (s DescribeLagsOutput) GoString() string

GoString returns the string representation

func (*DescribeLagsOutput) SetLags

func (s *DescribeLagsOutput) SetLags(v []*Lag) *DescribeLagsOutput

SetLags sets the Lags field's value.

func (DescribeLagsOutput) String

func (s DescribeLagsOutput) String() string

String returns the string representation

type DescribeLoaInput

type DescribeLoaInput struct {

	// The ID of a connection, LAG, or interconnect for which to get the LOA-CFA
	// information.
	//
	// Example: dxcon-abc123 or dxlag-abc123
	//
	// Default: None
	//
	// ConnectionId is a required field
	ConnectionId *string `locationName:"connectionId" type:"string" required:"true"`

	// A standard media type indicating the content type of the LOA-CFA document.
	// Currently, the only supported value is "application/pdf".
	//
	// Default: application/pdf
	LoaContentType *string `locationName:"loaContentType" type:"string" enum:"LoaContentType"`

	// The name of the service provider who establishes connectivity on your behalf.
	// If you supply this parameter, the LOA-CFA lists the provider name alongside
	// your company name as the requester of the cross connect.
	//
	// Default: None
	ProviderName *string `locationName:"providerName" type:"string"`
	// contains filtered or unexported fields
}

Container for the parameters to the DescribeLoa operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeLoaRequest

func (DescribeLoaInput) GoString

func (s DescribeLoaInput) GoString() string

GoString returns the string representation

func (*DescribeLoaInput) SetConnectionId

func (s *DescribeLoaInput) SetConnectionId(v string) *DescribeLoaInput

SetConnectionId sets the ConnectionId field's value.

func (*DescribeLoaInput) SetLoaContentType

func (s *DescribeLoaInput) SetLoaContentType(v string) *DescribeLoaInput

SetLoaContentType sets the LoaContentType field's value.

func (*DescribeLoaInput) SetProviderName

func (s *DescribeLoaInput) SetProviderName(v string) *DescribeLoaInput

SetProviderName sets the ProviderName field's value.

func (DescribeLoaInput) String

func (s DescribeLoaInput) String() string

String returns the string representation

func (*DescribeLoaInput) Validate

func (s *DescribeLoaInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeLocationsInput

type DescribeLocationsInput struct {
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeLocationsInput

func (DescribeLocationsInput) GoString

func (s DescribeLocationsInput) GoString() string

GoString returns the string representation

func (DescribeLocationsInput) String

func (s DescribeLocationsInput) String() string

String returns the string representation

type DescribeLocationsOutput

type DescribeLocationsOutput struct {

	// A list of colocation hubs where network providers have equipment. Most regions
	// have multiple locations available.
	Locations []*Location `locationName:"locations" type:"list"`
	// contains filtered or unexported fields
}

A location is a network facility where AWS Direct Connect routers are available to be connected. Generally, these are colocation hubs where many network providers have equipment, and where cross connects can be delivered. Locations include a name and facility code, and must be provided when creating a connection. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/Locations

func (DescribeLocationsOutput) GoString

func (s DescribeLocationsOutput) GoString() string

GoString returns the string representation

func (*DescribeLocationsOutput) SetLocations

SetLocations sets the Locations field's value.

func (DescribeLocationsOutput) String

func (s DescribeLocationsOutput) String() string

String returns the string representation

type DescribeTagsInput

type DescribeTagsInput struct {

	// The Amazon Resource Names (ARNs) of the Direct Connect resources.
	//
	// ResourceArns is a required field
	ResourceArns []*string `locationName:"resourceArns" type:"list" required:"true"`
	// contains filtered or unexported fields
}

Container for the parameters to the DescribeTags operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeTagsRequest

func (DescribeTagsInput) GoString

func (s DescribeTagsInput) GoString() string

GoString returns the string representation

func (*DescribeTagsInput) SetResourceArns

func (s *DescribeTagsInput) SetResourceArns(v []*string) *DescribeTagsInput

SetResourceArns sets the ResourceArns field's value.

func (DescribeTagsInput) String

func (s DescribeTagsInput) String() string

String returns the string representation

func (*DescribeTagsInput) Validate

func (s *DescribeTagsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeTagsOutput

type DescribeTagsOutput struct {

	// Information about the tags.
	ResourceTags []*ResourceTag `locationName:"resourceTags" type:"list"`
	// contains filtered or unexported fields
}

The response received when DescribeTags is called. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeTagsResponse

func (DescribeTagsOutput) GoString

func (s DescribeTagsOutput) GoString() string

GoString returns the string representation

func (*DescribeTagsOutput) SetResourceTags

func (s *DescribeTagsOutput) SetResourceTags(v []*ResourceTag) *DescribeTagsOutput

SetResourceTags sets the ResourceTags field's value.

func (DescribeTagsOutput) String

func (s DescribeTagsOutput) String() string

String returns the string representation

type DescribeVirtualGatewaysInput

type DescribeVirtualGatewaysInput struct {
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeVirtualGatewaysInput

func (DescribeVirtualGatewaysInput) GoString

func (s DescribeVirtualGatewaysInput) GoString() string

GoString returns the string representation

func (DescribeVirtualGatewaysInput) String

String returns the string representation

type DescribeVirtualGatewaysOutput

type DescribeVirtualGatewaysOutput struct {

	// A list of virtual private gateways.
	VirtualGateways []*VirtualGateway `locationName:"virtualGateways" type:"list"`
	// contains filtered or unexported fields
}

A structure containing a list of virtual private gateways. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/VirtualGateways

func (DescribeVirtualGatewaysOutput) GoString

GoString returns the string representation

func (*DescribeVirtualGatewaysOutput) SetVirtualGateways

SetVirtualGateways sets the VirtualGateways field's value.

func (DescribeVirtualGatewaysOutput) String

String returns the string representation

type DescribeVirtualInterfacesInput

type DescribeVirtualInterfacesInput struct {

	// The ID of the connection. This field is also used as the ID type for operations
	// that use multiple connection types (LAG, interconnect, and/or connection).
	//
	// Example: dxcon-fg5678gh
	//
	// Default: None
	ConnectionId *string `locationName:"connectionId" type:"string"`

	// The ID of the virtual interface.
	//
	// Example: dxvif-123dfg56
	//
	// Default: None
	VirtualInterfaceId *string `locationName:"virtualInterfaceId" type:"string"`
	// contains filtered or unexported fields
}

Container for the parameters to the DescribeVirtualInterfaces operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeVirtualInterfacesRequest

func (DescribeVirtualInterfacesInput) GoString

GoString returns the string representation

func (*DescribeVirtualInterfacesInput) SetConnectionId

SetConnectionId sets the ConnectionId field's value.

func (*DescribeVirtualInterfacesInput) SetVirtualInterfaceId

SetVirtualInterfaceId sets the VirtualInterfaceId field's value.

func (DescribeVirtualInterfacesInput) String

String returns the string representation

type DescribeVirtualInterfacesOutput

type DescribeVirtualInterfacesOutput struct {

	// A list of virtual interfaces.
	VirtualInterfaces []*VirtualInterface `locationName:"virtualInterfaces" type:"list"`
	// contains filtered or unexported fields
}

A structure containing a list of virtual interfaces. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/VirtualInterfaces

func (DescribeVirtualInterfacesOutput) GoString

GoString returns the string representation

func (*DescribeVirtualInterfacesOutput) SetVirtualInterfaces

SetVirtualInterfaces sets the VirtualInterfaces field's value.

func (DescribeVirtualInterfacesOutput) String

String returns the string representation

type DirectConnect

type DirectConnect struct {
	*client.Client
}

AWS Direct Connect links your internal network to an AWS Direct Connect location over a standard 1 gigabit or 10 gigabit Ethernet fiber-optic cable. One end of the cable is connected to your router, the other to an AWS Direct Connect router. With this connection in place, you can create virtual interfaces directly to the AWS cloud (for example, to Amazon Elastic Compute Cloud (Amazon EC2) and Amazon Simple Storage Service (Amazon S3)) and to Amazon Virtual Private Cloud (Amazon VPC), bypassing Internet service providers in your network path. An AWS Direct Connect location provides access to AWS in the region it is associated with, as well as access to other US regions. For example, you can provision a single connection to any AWS Direct Connect location in the US and use it to access public AWS services in all US Regions and AWS GovCloud (US). The service client's operations are safe to be used concurrently. It is not safe to mutate any of the client's properties though. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25

func New

func New(p client.ConfigProvider, cfgs ...*aws.Config) *DirectConnect

New creates a new instance of the DirectConnect client with a session. If additional configuration is needed for the client instance use the optional aws.Config parameter to add your extra config.

Example:

// Create a DirectConnect client from just a session.
svc := directconnect.New(mySession)

// Create a DirectConnect client with additional configuration
svc := directconnect.New(mySession, aws.NewConfig().WithRegion("us-west-2"))

func (*DirectConnect) AllocateConnectionOnInterconnect

func (c *DirectConnect) AllocateConnectionOnInterconnect(input *AllocateConnectionOnInterconnectInput) (*Connection, error)

AllocateConnectionOnInterconnect API operation for AWS Direct Connect.

Deprecated in favor of AllocateHostedConnection.

Creates a hosted connection on an interconnect.

Allocates a VLAN number and a specified amount of bandwidth for use by a hosted connection on the given interconnect.

This is intended for use by AWS Direct Connect partners only.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation AllocateConnectionOnInterconnect for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" A server-side error occurred during the API call. The error message will contain additional details about the cause.

  • ErrCodeClientException "ClientException" The API was called with invalid parameters. The error message will contain additional details about the cause.

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/AllocateConnectionOnInterconnect

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directconnect"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := directconnect.New(sess)

	params := &directconnect.AllocateConnectionOnInterconnectInput{
		Bandwidth:      aws.String("Bandwidth"),      // Required
		ConnectionName: aws.String("ConnectionName"), // Required
		InterconnectId: aws.String("InterconnectId"), // Required
		OwnerAccount:   aws.String("OwnerAccount"),   // Required
		Vlan:           aws.Int64(1),                 // Required
	}
	resp, err := svc.AllocateConnectionOnInterconnect(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*DirectConnect) AllocateConnectionOnInterconnectRequest

func (c *DirectConnect) AllocateConnectionOnInterconnectRequest(input *AllocateConnectionOnInterconnectInput) (req *request.Request, output *Connection)

AllocateConnectionOnInterconnectRequest generates a "aws/request.Request" representing the client's request for the AllocateConnectionOnInterconnect operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See AllocateConnectionOnInterconnect for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the AllocateConnectionOnInterconnect method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the AllocateConnectionOnInterconnectRequest method.
req, resp := client.AllocateConnectionOnInterconnectRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/AllocateConnectionOnInterconnect

func (*DirectConnect) AllocateConnectionOnInterconnectWithContext

func (c *DirectConnect) AllocateConnectionOnInterconnectWithContext(ctx aws.Context, input *AllocateConnectionOnInterconnectInput, opts ...request.Option) (*Connection, error)

AllocateConnectionOnInterconnectWithContext is the same as AllocateConnectionOnInterconnect with the addition of the ability to pass a context and additional request options.

See AllocateConnectionOnInterconnect for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) AllocateHostedConnection

func (c *DirectConnect) AllocateHostedConnection(input *AllocateHostedConnectionInput) (*Connection, error)

AllocateHostedConnection API operation for AWS Direct Connect.

Creates a hosted connection on an interconnect or a link aggregation group (LAG).

Allocates a VLAN number and a specified amount of bandwidth for use by a hosted connection on the given interconnect or LAG.

This is intended for use by AWS Direct Connect partners only.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation AllocateHostedConnection for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" A server-side error occurred during the API call. The error message will contain additional details about the cause.

  • ErrCodeClientException "ClientException" The API was called with invalid parameters. The error message will contain additional details about the cause.

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/AllocateHostedConnection

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directconnect"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := directconnect.New(sess)

	params := &directconnect.AllocateHostedConnectionInput{
		Bandwidth:      aws.String("Bandwidth"),      // Required
		ConnectionId:   aws.String("ConnectionId"),   // Required
		ConnectionName: aws.String("ConnectionName"), // Required
		OwnerAccount:   aws.String("OwnerAccount"),   // Required
		Vlan:           aws.Int64(1),                 // Required
	}
	resp, err := svc.AllocateHostedConnection(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*DirectConnect) AllocateHostedConnectionRequest

func (c *DirectConnect) AllocateHostedConnectionRequest(input *AllocateHostedConnectionInput) (req *request.Request, output *Connection)

AllocateHostedConnectionRequest generates a "aws/request.Request" representing the client's request for the AllocateHostedConnection operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See AllocateHostedConnection for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the AllocateHostedConnection method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the AllocateHostedConnectionRequest method.
req, resp := client.AllocateHostedConnectionRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/AllocateHostedConnection

func (*DirectConnect) AllocateHostedConnectionWithContext

func (c *DirectConnect) AllocateHostedConnectionWithContext(ctx aws.Context, input *AllocateHostedConnectionInput, opts ...request.Option) (*Connection, error)

AllocateHostedConnectionWithContext is the same as AllocateHostedConnection with the addition of the ability to pass a context and additional request options.

See AllocateHostedConnection for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) AllocatePrivateVirtualInterface

func (c *DirectConnect) AllocatePrivateVirtualInterface(input *AllocatePrivateVirtualInterfaceInput) (*VirtualInterface, error)

AllocatePrivateVirtualInterface API operation for AWS Direct Connect.

Provisions a private virtual interface to be owned by another AWS customer.

Virtual interfaces created using this action must be confirmed by the virtual interface owner by using the ConfirmPrivateVirtualInterface action. Until then, the virtual interface will be in 'Confirming' state, and will not be available for handling traffic.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation AllocatePrivateVirtualInterface for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" A server-side error occurred during the API call. The error message will contain additional details about the cause.

  • ErrCodeClientException "ClientException" The API was called with invalid parameters. The error message will contain additional details about the cause.

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/AllocatePrivateVirtualInterface

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directconnect"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := directconnect.New(sess)

	params := &directconnect.AllocatePrivateVirtualInterfaceInput{
		ConnectionId: aws.String("ConnectionId"), // Required
		NewPrivateVirtualInterfaceAllocation: &directconnect.NewPrivateVirtualInterfaceAllocation{ // Required
			Asn:                  aws.Int64(1),                       // Required
			VirtualInterfaceName: aws.String("VirtualInterfaceName"), // Required
			Vlan:                 aws.Int64(1),                       // Required
			AddressFamily:        aws.String("AddressFamily"),
			AmazonAddress:        aws.String("AmazonAddress"),
			AuthKey:              aws.String("BGPAuthKey"),
			CustomerAddress:      aws.String("CustomerAddress"),
		},
		OwnerAccount: aws.String("OwnerAccount"), // Required
	}
	resp, err := svc.AllocatePrivateVirtualInterface(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*DirectConnect) AllocatePrivateVirtualInterfaceRequest

func (c *DirectConnect) AllocatePrivateVirtualInterfaceRequest(input *AllocatePrivateVirtualInterfaceInput) (req *request.Request, output *VirtualInterface)

AllocatePrivateVirtualInterfaceRequest generates a "aws/request.Request" representing the client's request for the AllocatePrivateVirtualInterface operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See AllocatePrivateVirtualInterface for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the AllocatePrivateVirtualInterface method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the AllocatePrivateVirtualInterfaceRequest method.
req, resp := client.AllocatePrivateVirtualInterfaceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/AllocatePrivateVirtualInterface

func (*DirectConnect) AllocatePrivateVirtualInterfaceWithContext

func (c *DirectConnect) AllocatePrivateVirtualInterfaceWithContext(ctx aws.Context, input *AllocatePrivateVirtualInterfaceInput, opts ...request.Option) (*VirtualInterface, error)

AllocatePrivateVirtualInterfaceWithContext is the same as AllocatePrivateVirtualInterface with the addition of the ability to pass a context and additional request options.

See AllocatePrivateVirtualInterface for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) AllocatePublicVirtualInterface

func (c *DirectConnect) AllocatePublicVirtualInterface(input *AllocatePublicVirtualInterfaceInput) (*VirtualInterface, error)

AllocatePublicVirtualInterface API operation for AWS Direct Connect.

Provisions a public virtual interface to be owned by a different customer.

The owner of a connection calls this function to provision a public virtual interface which will be owned by another AWS customer.

Virtual interfaces created using this function must be confirmed by the virtual interface owner by calling ConfirmPublicVirtualInterface. Until this step has been completed, the virtual interface will be in 'Confirming' state, and will not be available for handling traffic.

When creating an IPv6 public virtual interface (addressFamily is 'ipv6'), the customer and amazon address fields should be left blank to use auto-assigned IPv6 space. Custom IPv6 Addresses are currently not supported.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation AllocatePublicVirtualInterface for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" A server-side error occurred during the API call. The error message will contain additional details about the cause.

  • ErrCodeClientException "ClientException" The API was called with invalid parameters. The error message will contain additional details about the cause.

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/AllocatePublicVirtualInterface

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directconnect"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := directconnect.New(sess)

	params := &directconnect.AllocatePublicVirtualInterfaceInput{
		ConnectionId: aws.String("ConnectionId"), // Required
		NewPublicVirtualInterfaceAllocation: &directconnect.NewPublicVirtualInterfaceAllocation{ // Required
			Asn:                  aws.Int64(1),                       // Required
			VirtualInterfaceName: aws.String("VirtualInterfaceName"), // Required
			Vlan:                 aws.Int64(1),                       // Required
			AddressFamily:        aws.String("AddressFamily"),
			AmazonAddress:        aws.String("AmazonAddress"),
			AuthKey:              aws.String("BGPAuthKey"),
			CustomerAddress:      aws.String("CustomerAddress"),
			RouteFilterPrefixes: []*directconnect.RouteFilterPrefix{
				{ // Required
					Cidr: aws.String("CIDR"),
				},
				// More values...
			},
		},
		OwnerAccount: aws.String("OwnerAccount"), // Required
	}
	resp, err := svc.AllocatePublicVirtualInterface(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*DirectConnect) AllocatePublicVirtualInterfaceRequest

func (c *DirectConnect) AllocatePublicVirtualInterfaceRequest(input *AllocatePublicVirtualInterfaceInput) (req *request.Request, output *VirtualInterface)

AllocatePublicVirtualInterfaceRequest generates a "aws/request.Request" representing the client's request for the AllocatePublicVirtualInterface operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See AllocatePublicVirtualInterface for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the AllocatePublicVirtualInterface method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the AllocatePublicVirtualInterfaceRequest method.
req, resp := client.AllocatePublicVirtualInterfaceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/AllocatePublicVirtualInterface

func (*DirectConnect) AllocatePublicVirtualInterfaceWithContext

func (c *DirectConnect) AllocatePublicVirtualInterfaceWithContext(ctx aws.Context, input *AllocatePublicVirtualInterfaceInput, opts ...request.Option) (*VirtualInterface, error)

AllocatePublicVirtualInterfaceWithContext is the same as AllocatePublicVirtualInterface with the addition of the ability to pass a context and additional request options.

See AllocatePublicVirtualInterface for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) AssociateConnectionWithLag

func (c *DirectConnect) AssociateConnectionWithLag(input *AssociateConnectionWithLagInput) (*Connection, error)

AssociateConnectionWithLag API operation for AWS Direct Connect.

Associates an existing connection with a link aggregation group (LAG). The connection is interrupted and re-established as a member of the LAG (connectivity to AWS will be interrupted). The connection must be hosted on the same AWS Direct Connect endpoint as the LAG, and its bandwidth must match the bandwidth for the LAG. You can reassociate a connection that's currently associated with a different LAG; however, if removing the connection will cause the original LAG to fall below its setting for minimum number of operational connections, the request fails.

Virtual interfaces that are directly associated with the connection are not automatically migrated. You can delete them or associate them with the target LAG using AssociateVirtualInterface. If the connection was originally associated with a different LAG, the virtual interfaces remain associated with the original LAG.

For interconnects, hosted connections are not automatically migrated. You can delete them, or the owner of the physical connection can associate them with the target LAG using AssociateHostedConnection. After all hosted connections have been migrated, the interconnect can be migrated into the LAG. If the interconnect is already associated with a LAG, the hosted connections remain associated with the original LAG.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation AssociateConnectionWithLag for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" A server-side error occurred during the API call. The error message will contain additional details about the cause.

  • ErrCodeClientException "ClientException" The API was called with invalid parameters. The error message will contain additional details about the cause.

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/AssociateConnectionWithLag

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directconnect"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := directconnect.New(sess)

	params := &directconnect.AssociateConnectionWithLagInput{
		ConnectionId: aws.String("ConnectionId"), // Required
		LagId:        aws.String("LagId"),        // Required
	}
	resp, err := svc.AssociateConnectionWithLag(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*DirectConnect) AssociateConnectionWithLagRequest

func (c *DirectConnect) AssociateConnectionWithLagRequest(input *AssociateConnectionWithLagInput) (req *request.Request, output *Connection)

AssociateConnectionWithLagRequest generates a "aws/request.Request" representing the client's request for the AssociateConnectionWithLag operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See AssociateConnectionWithLag for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the AssociateConnectionWithLag method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the AssociateConnectionWithLagRequest method.
req, resp := client.AssociateConnectionWithLagRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/AssociateConnectionWithLag

func (*DirectConnect) AssociateConnectionWithLagWithContext

func (c *DirectConnect) AssociateConnectionWithLagWithContext(ctx aws.Context, input *AssociateConnectionWithLagInput, opts ...request.Option) (*Connection, error)

AssociateConnectionWithLagWithContext is the same as AssociateConnectionWithLag with the addition of the ability to pass a context and additional request options.

See AssociateConnectionWithLag for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) AssociateHostedConnection

func (c *DirectConnect) AssociateHostedConnection(input *AssociateHostedConnectionInput) (*Connection, error)

AssociateHostedConnection API operation for AWS Direct Connect.

Associates a hosted connection and its virtual interfaces with a link aggregation group (LAG) or interconnect. If the target interconnect or LAG has an existing hosted connection with a conflicting VLAN number or IP address, the operation fails. This action temporarily interrupts the hosted connection's connectivity to AWS as it is being migrated.

This is intended for use by AWS Direct Connect partners only.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation AssociateHostedConnection for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" A server-side error occurred during the API call. The error message will contain additional details about the cause.

  • ErrCodeClientException "ClientException" The API was called with invalid parameters. The error message will contain additional details about the cause.

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/AssociateHostedConnection

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directconnect"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := directconnect.New(sess)

	params := &directconnect.AssociateHostedConnectionInput{
		ConnectionId:       aws.String("ConnectionId"), // Required
		ParentConnectionId: aws.String("ConnectionId"), // Required
	}
	resp, err := svc.AssociateHostedConnection(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*DirectConnect) AssociateHostedConnectionRequest

func (c *DirectConnect) AssociateHostedConnectionRequest(input *AssociateHostedConnectionInput) (req *request.Request, output *Connection)

AssociateHostedConnectionRequest generates a "aws/request.Request" representing the client's request for the AssociateHostedConnection operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See AssociateHostedConnection for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the AssociateHostedConnection method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the AssociateHostedConnectionRequest method.
req, resp := client.AssociateHostedConnectionRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/AssociateHostedConnection

func (*DirectConnect) AssociateHostedConnectionWithContext

func (c *DirectConnect) AssociateHostedConnectionWithContext(ctx aws.Context, input *AssociateHostedConnectionInput, opts ...request.Option) (*Connection, error)

AssociateHostedConnectionWithContext is the same as AssociateHostedConnection with the addition of the ability to pass a context and additional request options.

See AssociateHostedConnection for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) AssociateVirtualInterface

func (c *DirectConnect) AssociateVirtualInterface(input *AssociateVirtualInterfaceInput) (*VirtualInterface, error)

AssociateVirtualInterface API operation for AWS Direct Connect.

Associates a virtual interface with a specified link aggregation group (LAG) or connection. Connectivity to AWS is temporarily interrupted as the virtual interface is being migrated. If the target connection or LAG has an associated virtual interface with a conflicting VLAN number or a conflicting IP address, the operation fails.

Virtual interfaces associated with a hosted connection cannot be associated with a LAG; hosted connections must be migrated along with their virtual interfaces using AssociateHostedConnection.

Hosted virtual interfaces (an interface for which the owner of the connection is not the owner of physical connection) can only be reassociated by the owner of the physical connection.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation AssociateVirtualInterface for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" A server-side error occurred during the API call. The error message will contain additional details about the cause.

  • ErrCodeClientException "ClientException" The API was called with invalid parameters. The error message will contain additional details about the cause.

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/AssociateVirtualInterface

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directconnect"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := directconnect.New(sess)

	params := &directconnect.AssociateVirtualInterfaceInput{
		ConnectionId:       aws.String("ConnectionId"),       // Required
		VirtualInterfaceId: aws.String("VirtualInterfaceId"), // Required
	}
	resp, err := svc.AssociateVirtualInterface(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*DirectConnect) AssociateVirtualInterfaceRequest

func (c *DirectConnect) AssociateVirtualInterfaceRequest(input *AssociateVirtualInterfaceInput) (req *request.Request, output *VirtualInterface)

AssociateVirtualInterfaceRequest generates a "aws/request.Request" representing the client's request for the AssociateVirtualInterface operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See AssociateVirtualInterface for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the AssociateVirtualInterface method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the AssociateVirtualInterfaceRequest method.
req, resp := client.AssociateVirtualInterfaceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/AssociateVirtualInterface

func (*DirectConnect) AssociateVirtualInterfaceWithContext

func (c *DirectConnect) AssociateVirtualInterfaceWithContext(ctx aws.Context, input *AssociateVirtualInterfaceInput, opts ...request.Option) (*VirtualInterface, error)

AssociateVirtualInterfaceWithContext is the same as AssociateVirtualInterface with the addition of the ability to pass a context and additional request options.

See AssociateVirtualInterface for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) ConfirmConnection

func (c *DirectConnect) ConfirmConnection(input *ConfirmConnectionInput) (*ConfirmConnectionOutput, error)

ConfirmConnection API operation for AWS Direct Connect.

Confirm the creation of a hosted connection on an interconnect.

Upon creation, the hosted connection is initially in the 'Ordering' state, and will remain in this state until the owner calls ConfirmConnection to confirm creation of the hosted connection.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation ConfirmConnection for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" A server-side error occurred during the API call. The error message will contain additional details about the cause.

  • ErrCodeClientException "ClientException" The API was called with invalid parameters. The error message will contain additional details about the cause.

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/ConfirmConnection

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directconnect"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := directconnect.New(sess)

	params := &directconnect.ConfirmConnectionInput{
		ConnectionId: aws.String("ConnectionId"), // Required
	}
	resp, err := svc.ConfirmConnection(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*DirectConnect) ConfirmConnectionRequest

func (c *DirectConnect) ConfirmConnectionRequest(input *ConfirmConnectionInput) (req *request.Request, output *ConfirmConnectionOutput)

ConfirmConnectionRequest generates a "aws/request.Request" representing the client's request for the ConfirmConnection operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See ConfirmConnection for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ConfirmConnection method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the ConfirmConnectionRequest method.
req, resp := client.ConfirmConnectionRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/ConfirmConnection

func (*DirectConnect) ConfirmConnectionWithContext

func (c *DirectConnect) ConfirmConnectionWithContext(ctx aws.Context, input *ConfirmConnectionInput, opts ...request.Option) (*ConfirmConnectionOutput, error)

ConfirmConnectionWithContext is the same as ConfirmConnection with the addition of the ability to pass a context and additional request options.

See ConfirmConnection for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) ConfirmPrivateVirtualInterface

ConfirmPrivateVirtualInterface API operation for AWS Direct Connect.

Accept ownership of a private virtual interface created by another customer.

After the virtual interface owner calls this function, the virtual interface will be created and attached to the given virtual private gateway, and will be available for handling traffic.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation ConfirmPrivateVirtualInterface for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" A server-side error occurred during the API call. The error message will contain additional details about the cause.

  • ErrCodeClientException "ClientException" The API was called with invalid parameters. The error message will contain additional details about the cause.

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/ConfirmPrivateVirtualInterface

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directconnect"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := directconnect.New(sess)

	params := &directconnect.ConfirmPrivateVirtualInterfaceInput{
		VirtualGatewayId:   aws.String("VirtualGatewayId"),   // Required
		VirtualInterfaceId: aws.String("VirtualInterfaceId"), // Required
	}
	resp, err := svc.ConfirmPrivateVirtualInterface(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*DirectConnect) ConfirmPrivateVirtualInterfaceRequest

func (c *DirectConnect) ConfirmPrivateVirtualInterfaceRequest(input *ConfirmPrivateVirtualInterfaceInput) (req *request.Request, output *ConfirmPrivateVirtualInterfaceOutput)

ConfirmPrivateVirtualInterfaceRequest generates a "aws/request.Request" representing the client's request for the ConfirmPrivateVirtualInterface operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See ConfirmPrivateVirtualInterface for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ConfirmPrivateVirtualInterface method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the ConfirmPrivateVirtualInterfaceRequest method.
req, resp := client.ConfirmPrivateVirtualInterfaceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/ConfirmPrivateVirtualInterface

func (*DirectConnect) ConfirmPrivateVirtualInterfaceWithContext

func (c *DirectConnect) ConfirmPrivateVirtualInterfaceWithContext(ctx aws.Context, input *ConfirmPrivateVirtualInterfaceInput, opts ...request.Option) (*ConfirmPrivateVirtualInterfaceOutput, error)

ConfirmPrivateVirtualInterfaceWithContext is the same as ConfirmPrivateVirtualInterface with the addition of the ability to pass a context and additional request options.

See ConfirmPrivateVirtualInterface for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) ConfirmPublicVirtualInterface

ConfirmPublicVirtualInterface API operation for AWS Direct Connect.

Accept ownership of a public virtual interface created by another customer.

After the virtual interface owner calls this function, the specified virtual interface will be created and made available for handling traffic.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation ConfirmPublicVirtualInterface for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" A server-side error occurred during the API call. The error message will contain additional details about the cause.

  • ErrCodeClientException "ClientException" The API was called with invalid parameters. The error message will contain additional details about the cause.

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/ConfirmPublicVirtualInterface

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directconnect"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := directconnect.New(sess)

	params := &directconnect.ConfirmPublicVirtualInterfaceInput{
		VirtualInterfaceId: aws.String("VirtualInterfaceId"), // Required
	}
	resp, err := svc.ConfirmPublicVirtualInterface(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*DirectConnect) ConfirmPublicVirtualInterfaceRequest

func (c *DirectConnect) ConfirmPublicVirtualInterfaceRequest(input *ConfirmPublicVirtualInterfaceInput) (req *request.Request, output *ConfirmPublicVirtualInterfaceOutput)

ConfirmPublicVirtualInterfaceRequest generates a "aws/request.Request" representing the client's request for the ConfirmPublicVirtualInterface operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See ConfirmPublicVirtualInterface for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ConfirmPublicVirtualInterface method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the ConfirmPublicVirtualInterfaceRequest method.
req, resp := client.ConfirmPublicVirtualInterfaceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/ConfirmPublicVirtualInterface

func (*DirectConnect) ConfirmPublicVirtualInterfaceWithContext

func (c *DirectConnect) ConfirmPublicVirtualInterfaceWithContext(ctx aws.Context, input *ConfirmPublicVirtualInterfaceInput, opts ...request.Option) (*ConfirmPublicVirtualInterfaceOutput, error)

ConfirmPublicVirtualInterfaceWithContext is the same as ConfirmPublicVirtualInterface with the addition of the ability to pass a context and additional request options.

See ConfirmPublicVirtualInterface for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) CreateBGPPeer

func (c *DirectConnect) CreateBGPPeer(input *CreateBGPPeerInput) (*CreateBGPPeerOutput, error)

CreateBGPPeer API operation for AWS Direct Connect.

Creates a new BGP peer on a specified virtual interface. The BGP peer cannot be in the same address family (IPv4/IPv6) of an existing BGP peer on the virtual interface.

You must create a BGP peer for the corresponding address family in order to access AWS resources that also use that address family.

When creating a IPv6 BGP peer, the Amazon address and customer address fields must be left blank. IPv6 addresses are automatically assigned from Amazon's pool of IPv6 addresses; you cannot specify custom IPv6 addresses.

For a public virtual interface, the Autonomous System Number (ASN) must be private or already whitelisted for the virtual interface.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation CreateBGPPeer for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" A server-side error occurred during the API call. The error message will contain additional details about the cause.

  • ErrCodeClientException "ClientException" The API was called with invalid parameters. The error message will contain additional details about the cause.

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/CreateBGPPeer

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directconnect"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := directconnect.New(sess)

	params := &directconnect.CreateBGPPeerInput{
		NewBGPPeer: &directconnect.NewBGPPeer{
			AddressFamily:   aws.String("AddressFamily"),
			AmazonAddress:   aws.String("AmazonAddress"),
			Asn:             aws.Int64(1),
			AuthKey:         aws.String("BGPAuthKey"),
			CustomerAddress: aws.String("CustomerAddress"),
		},
		VirtualInterfaceId: aws.String("VirtualInterfaceId"),
	}
	resp, err := svc.CreateBGPPeer(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*DirectConnect) CreateBGPPeerRequest

func (c *DirectConnect) CreateBGPPeerRequest(input *CreateBGPPeerInput) (req *request.Request, output *CreateBGPPeerOutput)

CreateBGPPeerRequest generates a "aws/request.Request" representing the client's request for the CreateBGPPeer operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See CreateBGPPeer for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateBGPPeer method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the CreateBGPPeerRequest method.
req, resp := client.CreateBGPPeerRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/CreateBGPPeer

func (*DirectConnect) CreateBGPPeerWithContext

func (c *DirectConnect) CreateBGPPeerWithContext(ctx aws.Context, input *CreateBGPPeerInput, opts ...request.Option) (*CreateBGPPeerOutput, error)

CreateBGPPeerWithContext is the same as CreateBGPPeer with the addition of the ability to pass a context and additional request options.

See CreateBGPPeer for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) CreateConnection

func (c *DirectConnect) CreateConnection(input *CreateConnectionInput) (*Connection, error)

CreateConnection API operation for AWS Direct Connect.

Creates a new connection between the customer network and a specific AWS Direct Connect location.

A connection links your internal network to an AWS Direct Connect location over a standard 1 gigabit or 10 gigabit Ethernet fiber-optic cable. One end of the cable is connected to your router, the other to an AWS Direct Connect router. An AWS Direct Connect location provides access to Amazon Web Services in the region it is associated with. You can establish connections with AWS Direct Connect locations in multiple regions, but a connection in one region does not provide connectivity to other regions.

You can automatically add the new connection to a link aggregation group (LAG) by specifying a LAG ID in the request. This ensures that the new connection is allocated on the same AWS Direct Connect endpoint that hosts the specified LAG. If there are no available ports on the endpoint, the request fails and no connection will be created.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation CreateConnection for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" A server-side error occurred during the API call. The error message will contain additional details about the cause.

  • ErrCodeClientException "ClientException" The API was called with invalid parameters. The error message will contain additional details about the cause.

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/CreateConnection

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directconnect"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := directconnect.New(sess)

	params := &directconnect.CreateConnectionInput{
		Bandwidth:      aws.String("Bandwidth"),      // Required
		ConnectionName: aws.String("ConnectionName"), // Required
		Location:       aws.String("LocationCode"),   // Required
		LagId:          aws.String("LagId"),
	}
	resp, err := svc.CreateConnection(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*DirectConnect) CreateConnectionRequest

func (c *DirectConnect) CreateConnectionRequest(input *CreateConnectionInput) (req *request.Request, output *Connection)

CreateConnectionRequest generates a "aws/request.Request" representing the client's request for the CreateConnection operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See CreateConnection for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateConnection method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the CreateConnectionRequest method.
req, resp := client.CreateConnectionRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/CreateConnection

func (*DirectConnect) CreateConnectionWithContext

func (c *DirectConnect) CreateConnectionWithContext(ctx aws.Context, input *CreateConnectionInput, opts ...request.Option) (*Connection, error)

CreateConnectionWithContext is the same as CreateConnection with the addition of the ability to pass a context and additional request options.

See CreateConnection for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) CreateInterconnect

func (c *DirectConnect) CreateInterconnect(input *CreateInterconnectInput) (*Interconnect, error)

CreateInterconnect API operation for AWS Direct Connect.

Creates a new interconnect between a AWS Direct Connect partner's network and a specific AWS Direct Connect location.

An interconnect is a connection which is capable of hosting other connections. The AWS Direct Connect partner can use an interconnect to provide sub-1Gbps AWS Direct Connect service to tier 2 customers who do not have their own connections. Like a standard connection, an interconnect links the AWS Direct Connect partner's network to an AWS Direct Connect location over a standard 1 Gbps or 10 Gbps Ethernet fiber-optic cable. One end is connected to the partner's router, the other to an AWS Direct Connect router.

You can automatically add the new interconnect to a link aggregation group (LAG) by specifying a LAG ID in the request. This ensures that the new interconnect is allocated on the same AWS Direct Connect endpoint that hosts the specified LAG. If there are no available ports on the endpoint, the request fails and no interconnect will be created.

For each end customer, the AWS Direct Connect partner provisions a connection on their interconnect by calling AllocateConnectionOnInterconnect. The end customer can then connect to AWS resources by creating a virtual interface on their connection, using the VLAN assigned to them by the AWS Direct Connect partner.

This is intended for use by AWS Direct Connect partners only.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation CreateInterconnect for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" A server-side error occurred during the API call. The error message will contain additional details about the cause.

  • ErrCodeClientException "ClientException" The API was called with invalid parameters. The error message will contain additional details about the cause.

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/CreateInterconnect

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directconnect"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := directconnect.New(sess)

	params := &directconnect.CreateInterconnectInput{
		Bandwidth:        aws.String("Bandwidth"),        // Required
		InterconnectName: aws.String("InterconnectName"), // Required
		Location:         aws.String("LocationCode"),     // Required
		LagId:            aws.String("LagId"),
	}
	resp, err := svc.CreateInterconnect(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*DirectConnect) CreateInterconnectRequest

func (c *DirectConnect) CreateInterconnectRequest(input *CreateInterconnectInput) (req *request.Request, output *Interconnect)

CreateInterconnectRequest generates a "aws/request.Request" representing the client's request for the CreateInterconnect operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See CreateInterconnect for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateInterconnect method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the CreateInterconnectRequest method.
req, resp := client.CreateInterconnectRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/CreateInterconnect

func (*DirectConnect) CreateInterconnectWithContext

func (c *DirectConnect) CreateInterconnectWithContext(ctx aws.Context, input *CreateInterconnectInput, opts ...request.Option) (*Interconnect, error)

CreateInterconnectWithContext is the same as CreateInterconnect with the addition of the ability to pass a context and additional request options.

See CreateInterconnect for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) CreateLag

func (c *DirectConnect) CreateLag(input *CreateLagInput) (*Lag, error)

CreateLag API operation for AWS Direct Connect.

Creates a new link aggregation group (LAG) with the specified number of bundled physical connections between the customer network and a specific AWS Direct Connect location. A LAG is a logical interface that uses the Link Aggregation Control Protocol (LACP) to aggregate multiple 1 gigabit or 10 gigabit interfaces, allowing you to treat them as a single interface.

All connections in a LAG must use the same bandwidth (for example, 10 Gbps), and must terminate at the same AWS Direct Connect endpoint.

You can have up to 10 connections per LAG. Regardless of this limit, if you request more connections for the LAG than AWS Direct Connect can allocate on a single endpoint, no LAG is created.

You can specify an existing physical connection or interconnect to include in the LAG (which counts towards the total number of connections). Doing so interrupts the current physical connection or hosted connections, and re-establishes them as a member of the LAG. The LAG will be created on the same AWS Direct Connect endpoint to which the connection terminates. Any virtual interfaces associated with the connection are automatically disassociated and re-associated with the LAG. The connection ID does not change.

If the AWS account used to create a LAG is a registered AWS Direct Connect partner, the LAG is automatically enabled to host sub-connections. For a LAG owned by a partner, any associated virtual interfaces cannot be directly configured.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation CreateLag for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" A server-side error occurred during the API call. The error message will contain additional details about the cause.

  • ErrCodeClientException "ClientException" The API was called with invalid parameters. The error message will contain additional details about the cause.

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/CreateLag

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directconnect"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := directconnect.New(sess)

	params := &directconnect.CreateLagInput{
		ConnectionsBandwidth: aws.String("Bandwidth"),    // Required
		LagName:              aws.String("LagName"),      // Required
		Location:             aws.String("LocationCode"), // Required
		NumberOfConnections:  aws.Int64(1),               // Required
		ConnectionId:         aws.String("ConnectionId"),
	}
	resp, err := svc.CreateLag(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*DirectConnect) CreateLagRequest

func (c *DirectConnect) CreateLagRequest(input *CreateLagInput) (req *request.Request, output *Lag)

CreateLagRequest generates a "aws/request.Request" representing the client's request for the CreateLag operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See CreateLag for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateLag method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the CreateLagRequest method.
req, resp := client.CreateLagRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/CreateLag

func (*DirectConnect) CreateLagWithContext

func (c *DirectConnect) CreateLagWithContext(ctx aws.Context, input *CreateLagInput, opts ...request.Option) (*Lag, error)

CreateLagWithContext is the same as CreateLag with the addition of the ability to pass a context and additional request options.

See CreateLag for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) CreatePrivateVirtualInterface

func (c *DirectConnect) CreatePrivateVirtualInterface(input *CreatePrivateVirtualInterfaceInput) (*VirtualInterface, error)

CreatePrivateVirtualInterface API operation for AWS Direct Connect.

Creates a new private virtual interface. A virtual interface is the VLAN that transports AWS Direct Connect traffic. A private virtual interface supports sending traffic to a single virtual private cloud (VPC).

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation CreatePrivateVirtualInterface for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" A server-side error occurred during the API call. The error message will contain additional details about the cause.

  • ErrCodeClientException "ClientException" The API was called with invalid parameters. The error message will contain additional details about the cause.

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/CreatePrivateVirtualInterface

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directconnect"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := directconnect.New(sess)

	params := &directconnect.CreatePrivateVirtualInterfaceInput{
		ConnectionId: aws.String("ConnectionId"), // Required
		NewPrivateVirtualInterface: &directconnect.NewPrivateVirtualInterface{ // Required
			Asn:                  aws.Int64(1),                       // Required
			VirtualGatewayId:     aws.String("VirtualGatewayId"),     // Required
			VirtualInterfaceName: aws.String("VirtualInterfaceName"), // Required
			Vlan:                 aws.Int64(1),                       // Required
			AddressFamily:        aws.String("AddressFamily"),
			AmazonAddress:        aws.String("AmazonAddress"),
			AuthKey:              aws.String("BGPAuthKey"),
			CustomerAddress:      aws.String("CustomerAddress"),
		},
	}
	resp, err := svc.CreatePrivateVirtualInterface(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*DirectConnect) CreatePrivateVirtualInterfaceRequest

func (c *DirectConnect) CreatePrivateVirtualInterfaceRequest(input *CreatePrivateVirtualInterfaceInput) (req *request.Request, output *VirtualInterface)

CreatePrivateVirtualInterfaceRequest generates a "aws/request.Request" representing the client's request for the CreatePrivateVirtualInterface operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See CreatePrivateVirtualInterface for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreatePrivateVirtualInterface method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the CreatePrivateVirtualInterfaceRequest method.
req, resp := client.CreatePrivateVirtualInterfaceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/CreatePrivateVirtualInterface

func (*DirectConnect) CreatePrivateVirtualInterfaceWithContext

func (c *DirectConnect) CreatePrivateVirtualInterfaceWithContext(ctx aws.Context, input *CreatePrivateVirtualInterfaceInput, opts ...request.Option) (*VirtualInterface, error)

CreatePrivateVirtualInterfaceWithContext is the same as CreatePrivateVirtualInterface with the addition of the ability to pass a context and additional request options.

See CreatePrivateVirtualInterface for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) CreatePublicVirtualInterface

func (c *DirectConnect) CreatePublicVirtualInterface(input *CreatePublicVirtualInterfaceInput) (*VirtualInterface, error)

CreatePublicVirtualInterface API operation for AWS Direct Connect.

Creates a new public virtual interface. A virtual interface is the VLAN that transports AWS Direct Connect traffic. A public virtual interface supports sending traffic to public services of AWS such as Amazon Simple Storage Service (Amazon S3).

When creating an IPv6 public virtual interface (addressFamily is 'ipv6'), the customer and amazon address fields should be left blank to use auto-assigned IPv6 space. Custom IPv6 Addresses are currently not supported.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation CreatePublicVirtualInterface for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" A server-side error occurred during the API call. The error message will contain additional details about the cause.

  • ErrCodeClientException "ClientException" The API was called with invalid parameters. The error message will contain additional details about the cause.

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/CreatePublicVirtualInterface

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directconnect"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := directconnect.New(sess)

	params := &directconnect.CreatePublicVirtualInterfaceInput{
		ConnectionId: aws.String("ConnectionId"), // Required
		NewPublicVirtualInterface: &directconnect.NewPublicVirtualInterface{ // Required
			Asn:                  aws.Int64(1),                       // Required
			VirtualInterfaceName: aws.String("VirtualInterfaceName"), // Required
			Vlan:                 aws.Int64(1),                       // Required
			AddressFamily:        aws.String("AddressFamily"),
			AmazonAddress:        aws.String("AmazonAddress"),
			AuthKey:              aws.String("BGPAuthKey"),
			CustomerAddress:      aws.String("CustomerAddress"),
			RouteFilterPrefixes: []*directconnect.RouteFilterPrefix{
				{ // Required
					Cidr: aws.String("CIDR"),
				},
				// More values...
			},
		},
	}
	resp, err := svc.CreatePublicVirtualInterface(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*DirectConnect) CreatePublicVirtualInterfaceRequest

func (c *DirectConnect) CreatePublicVirtualInterfaceRequest(input *CreatePublicVirtualInterfaceInput) (req *request.Request, output *VirtualInterface)

CreatePublicVirtualInterfaceRequest generates a "aws/request.Request" representing the client's request for the CreatePublicVirtualInterface operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See CreatePublicVirtualInterface for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreatePublicVirtualInterface method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the CreatePublicVirtualInterfaceRequest method.
req, resp := client.CreatePublicVirtualInterfaceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/CreatePublicVirtualInterface

func (*DirectConnect) CreatePublicVirtualInterfaceWithContext

func (c *DirectConnect) CreatePublicVirtualInterfaceWithContext(ctx aws.Context, input *CreatePublicVirtualInterfaceInput, opts ...request.Option) (*VirtualInterface, error)

CreatePublicVirtualInterfaceWithContext is the same as CreatePublicVirtualInterface with the addition of the ability to pass a context and additional request options.

See CreatePublicVirtualInterface for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) DeleteBGPPeer

func (c *DirectConnect) DeleteBGPPeer(input *DeleteBGPPeerInput) (*DeleteBGPPeerOutput, error)

DeleteBGPPeer API operation for AWS Direct Connect.

Deletes a BGP peer on the specified virtual interface that matches the specified customer address and ASN. You cannot delete the last BGP peer from a virtual interface.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation DeleteBGPPeer for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" A server-side error occurred during the API call. The error message will contain additional details about the cause.

  • ErrCodeClientException "ClientException" The API was called with invalid parameters. The error message will contain additional details about the cause.

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DeleteBGPPeer

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directconnect"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := directconnect.New(sess)

	params := &directconnect.DeleteBGPPeerInput{
		Asn:                aws.Int64(1),
		CustomerAddress:    aws.String("CustomerAddress"),
		VirtualInterfaceId: aws.String("VirtualInterfaceId"),
	}
	resp, err := svc.DeleteBGPPeer(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*DirectConnect) DeleteBGPPeerRequest

func (c *DirectConnect) DeleteBGPPeerRequest(input *DeleteBGPPeerInput) (req *request.Request, output *DeleteBGPPeerOutput)

DeleteBGPPeerRequest generates a "aws/request.Request" representing the client's request for the DeleteBGPPeer operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DeleteBGPPeer for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteBGPPeer method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DeleteBGPPeerRequest method.
req, resp := client.DeleteBGPPeerRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DeleteBGPPeer

func (*DirectConnect) DeleteBGPPeerWithContext

func (c *DirectConnect) DeleteBGPPeerWithContext(ctx aws.Context, input *DeleteBGPPeerInput, opts ...request.Option) (*DeleteBGPPeerOutput, error)

DeleteBGPPeerWithContext is the same as DeleteBGPPeer with the addition of the ability to pass a context and additional request options.

See DeleteBGPPeer for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) DeleteConnection

func (c *DirectConnect) DeleteConnection(input *DeleteConnectionInput) (*Connection, error)

DeleteConnection API operation for AWS Direct Connect.

Deletes the connection.

Deleting a connection only stops the AWS Direct Connect port hour and data transfer charges. You need to cancel separately with the providers any services or charges for cross-connects or network circuits that connect you to the AWS Direct Connect location.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation DeleteConnection for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" A server-side error occurred during the API call. The error message will contain additional details about the cause.

  • ErrCodeClientException "ClientException" The API was called with invalid parameters. The error message will contain additional details about the cause.

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DeleteConnection

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directconnect"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := directconnect.New(sess)

	params := &directconnect.DeleteConnectionInput{
		ConnectionId: aws.String("ConnectionId"), // Required
	}
	resp, err := svc.DeleteConnection(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*DirectConnect) DeleteConnectionRequest

func (c *DirectConnect) DeleteConnectionRequest(input *DeleteConnectionInput) (req *request.Request, output *Connection)

DeleteConnectionRequest generates a "aws/request.Request" representing the client's request for the DeleteConnection operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DeleteConnection for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteConnection method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DeleteConnectionRequest method.
req, resp := client.DeleteConnectionRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DeleteConnection

func (*DirectConnect) DeleteConnectionWithContext

func (c *DirectConnect) DeleteConnectionWithContext(ctx aws.Context, input *DeleteConnectionInput, opts ...request.Option) (*Connection, error)

DeleteConnectionWithContext is the same as DeleteConnection with the addition of the ability to pass a context and additional request options.

See DeleteConnection for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) DeleteInterconnect

func (c *DirectConnect) DeleteInterconnect(input *DeleteInterconnectInput) (*DeleteInterconnectOutput, error)

DeleteInterconnect API operation for AWS Direct Connect.

Deletes the specified interconnect.

This is intended for use by AWS Direct Connect partners only.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation DeleteInterconnect for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" A server-side error occurred during the API call. The error message will contain additional details about the cause.

  • ErrCodeClientException "ClientException" The API was called with invalid parameters. The error message will contain additional details about the cause.

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DeleteInterconnect

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directconnect"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := directconnect.New(sess)

	params := &directconnect.DeleteInterconnectInput{
		InterconnectId: aws.String("InterconnectId"), // Required
	}
	resp, err := svc.DeleteInterconnect(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*DirectConnect) DeleteInterconnectRequest

func (c *DirectConnect) DeleteInterconnectRequest(input *DeleteInterconnectInput) (req *request.Request, output *DeleteInterconnectOutput)

DeleteInterconnectRequest generates a "aws/request.Request" representing the client's request for the DeleteInterconnect operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DeleteInterconnect for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteInterconnect method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DeleteInterconnectRequest method.
req, resp := client.DeleteInterconnectRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DeleteInterconnect

func (*DirectConnect) DeleteInterconnectWithContext

func (c *DirectConnect) DeleteInterconnectWithContext(ctx aws.Context, input *DeleteInterconnectInput, opts ...request.Option) (*DeleteInterconnectOutput, error)

DeleteInterconnectWithContext is the same as DeleteInterconnect with the addition of the ability to pass a context and additional request options.

See DeleteInterconnect for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) DeleteLag

func (c *DirectConnect) DeleteLag(input *DeleteLagInput) (*Lag, error)

DeleteLag API operation for AWS Direct Connect.

Deletes a link aggregation group (LAG). You cannot delete a LAG if it has active virtual interfaces or hosted connections.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation DeleteLag for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" A server-side error occurred during the API call. The error message will contain additional details about the cause.

  • ErrCodeClientException "ClientException" The API was called with invalid parameters. The error message will contain additional details about the cause.

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DeleteLag

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directconnect"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := directconnect.New(sess)

	params := &directconnect.DeleteLagInput{
		LagId: aws.String("LagId"), // Required
	}
	resp, err := svc.DeleteLag(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*DirectConnect) DeleteLagRequest

func (c *DirectConnect) DeleteLagRequest(input *DeleteLagInput) (req *request.Request, output *Lag)

DeleteLagRequest generates a "aws/request.Request" representing the client's request for the DeleteLag operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DeleteLag for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteLag method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DeleteLagRequest method.
req, resp := client.DeleteLagRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DeleteLag

func (*DirectConnect) DeleteLagWithContext

func (c *DirectConnect) DeleteLagWithContext(ctx aws.Context, input *DeleteLagInput, opts ...request.Option) (*Lag, error)

DeleteLagWithContext is the same as DeleteLag with the addition of the ability to pass a context and additional request options.

See DeleteLag for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) DeleteVirtualInterface

func (c *DirectConnect) DeleteVirtualInterface(input *DeleteVirtualInterfaceInput) (*DeleteVirtualInterfaceOutput, error)

DeleteVirtualInterface API operation for AWS Direct Connect.

Deletes a virtual interface.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation DeleteVirtualInterface for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" A server-side error occurred during the API call. The error message will contain additional details about the cause.

  • ErrCodeClientException "ClientException" The API was called with invalid parameters. The error message will contain additional details about the cause.

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DeleteVirtualInterface

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directconnect"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := directconnect.New(sess)

	params := &directconnect.DeleteVirtualInterfaceInput{
		VirtualInterfaceId: aws.String("VirtualInterfaceId"), // Required
	}
	resp, err := svc.DeleteVirtualInterface(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*DirectConnect) DeleteVirtualInterfaceRequest

func (c *DirectConnect) DeleteVirtualInterfaceRequest(input *DeleteVirtualInterfaceInput) (req *request.Request, output *DeleteVirtualInterfaceOutput)

DeleteVirtualInterfaceRequest generates a "aws/request.Request" representing the client's request for the DeleteVirtualInterface operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DeleteVirtualInterface for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteVirtualInterface method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DeleteVirtualInterfaceRequest method.
req, resp := client.DeleteVirtualInterfaceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DeleteVirtualInterface

func (*DirectConnect) DeleteVirtualInterfaceWithContext

func (c *DirectConnect) DeleteVirtualInterfaceWithContext(ctx aws.Context, input *DeleteVirtualInterfaceInput, opts ...request.Option) (*DeleteVirtualInterfaceOutput, error)

DeleteVirtualInterfaceWithContext is the same as DeleteVirtualInterface with the addition of the ability to pass a context and additional request options.

See DeleteVirtualInterface for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) DescribeConnectionLoa

func (c *DirectConnect) DescribeConnectionLoa(input *DescribeConnectionLoaInput) (*DescribeConnectionLoaOutput, error)

DescribeConnectionLoa API operation for AWS Direct Connect.

Deprecated in favor of DescribeLoa.

Returns the LOA-CFA for a Connection.

The Letter of Authorization - Connecting Facility Assignment (LOA-CFA) is a document that your APN partner or service provider uses when establishing your cross connect to AWS at the colocation facility. For more information, see Requesting Cross Connects at AWS Direct Connect Locations (http://docs.aws.amazon.com/directconnect/latest/UserGuide/Colocation.html) in the AWS Direct Connect user guide.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation DescribeConnectionLoa for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" A server-side error occurred during the API call. The error message will contain additional details about the cause.

  • ErrCodeClientException "ClientException" The API was called with invalid parameters. The error message will contain additional details about the cause.

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeConnectionLoa

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directconnect"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := directconnect.New(sess)

	params := &directconnect.DescribeConnectionLoaInput{
		ConnectionId:   aws.String("ConnectionId"), // Required
		LoaContentType: aws.String("LoaContentType"),
		ProviderName:   aws.String("ProviderName"),
	}
	resp, err := svc.DescribeConnectionLoa(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*DirectConnect) DescribeConnectionLoaRequest

func (c *DirectConnect) DescribeConnectionLoaRequest(input *DescribeConnectionLoaInput) (req *request.Request, output *DescribeConnectionLoaOutput)

DescribeConnectionLoaRequest generates a "aws/request.Request" representing the client's request for the DescribeConnectionLoa operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeConnectionLoa for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeConnectionLoa method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeConnectionLoaRequest method.
req, resp := client.DescribeConnectionLoaRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeConnectionLoa

func (*DirectConnect) DescribeConnectionLoaWithContext

func (c *DirectConnect) DescribeConnectionLoaWithContext(ctx aws.Context, input *DescribeConnectionLoaInput, opts ...request.Option) (*DescribeConnectionLoaOutput, error)

DescribeConnectionLoaWithContext is the same as DescribeConnectionLoa with the addition of the ability to pass a context and additional request options.

See DescribeConnectionLoa for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) DescribeConnections

func (c *DirectConnect) DescribeConnections(input *DescribeConnectionsInput) (*Connections, error)

DescribeConnections API operation for AWS Direct Connect.

Displays all connections in this region.

If a connection ID is provided, the call returns only that particular connection.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation DescribeConnections for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" A server-side error occurred during the API call. The error message will contain additional details about the cause.

  • ErrCodeClientException "ClientException" The API was called with invalid parameters. The error message will contain additional details about the cause.

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeConnections

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directconnect"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := directconnect.New(sess)

	params := &directconnect.DescribeConnectionsInput{
		ConnectionId: aws.String("ConnectionId"),
	}
	resp, err := svc.DescribeConnections(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*DirectConnect) DescribeConnectionsOnInterconnect

func (c *DirectConnect) DescribeConnectionsOnInterconnect(input *DescribeConnectionsOnInterconnectInput) (*Connections, error)

DescribeConnectionsOnInterconnect API operation for AWS Direct Connect.

Deprecated in favor of DescribeHostedConnections.

Returns a list of connections that have been provisioned on the given interconnect.

This is intended for use by AWS Direct Connect partners only.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation DescribeConnectionsOnInterconnect for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" A server-side error occurred during the API call. The error message will contain additional details about the cause.

  • ErrCodeClientException "ClientException" The API was called with invalid parameters. The error message will contain additional details about the cause.

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeConnectionsOnInterconnect

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directconnect"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := directconnect.New(sess)

	params := &directconnect.DescribeConnectionsOnInterconnectInput{
		InterconnectId: aws.String("InterconnectId"), // Required
	}
	resp, err := svc.DescribeConnectionsOnInterconnect(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*DirectConnect) DescribeConnectionsOnInterconnectRequest

func (c *DirectConnect) DescribeConnectionsOnInterconnectRequest(input *DescribeConnectionsOnInterconnectInput) (req *request.Request, output *Connections)

DescribeConnectionsOnInterconnectRequest generates a "aws/request.Request" representing the client's request for the DescribeConnectionsOnInterconnect operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeConnectionsOnInterconnect for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeConnectionsOnInterconnect method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeConnectionsOnInterconnectRequest method.
req, resp := client.DescribeConnectionsOnInterconnectRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeConnectionsOnInterconnect

func (*DirectConnect) DescribeConnectionsOnInterconnectWithContext

func (c *DirectConnect) DescribeConnectionsOnInterconnectWithContext(ctx aws.Context, input *DescribeConnectionsOnInterconnectInput, opts ...request.Option) (*Connections, error)

DescribeConnectionsOnInterconnectWithContext is the same as DescribeConnectionsOnInterconnect with the addition of the ability to pass a context and additional request options.

See DescribeConnectionsOnInterconnect for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) DescribeConnectionsRequest

func (c *DirectConnect) DescribeConnectionsRequest(input *DescribeConnectionsInput) (req *request.Request, output *Connections)

DescribeConnectionsRequest generates a "aws/request.Request" representing the client's request for the DescribeConnections operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeConnections for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeConnections method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeConnectionsRequest method.
req, resp := client.DescribeConnectionsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeConnections

func (*DirectConnect) DescribeConnectionsWithContext

func (c *DirectConnect) DescribeConnectionsWithContext(ctx aws.Context, input *DescribeConnectionsInput, opts ...request.Option) (*Connections, error)

DescribeConnectionsWithContext is the same as DescribeConnections with the addition of the ability to pass a context and additional request options.

See DescribeConnections for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) DescribeHostedConnections

func (c *DirectConnect) DescribeHostedConnections(input *DescribeHostedConnectionsInput) (*Connections, error)

DescribeHostedConnections API operation for AWS Direct Connect.

Returns a list of hosted connections that have been provisioned on the given interconnect or link aggregation group (LAG).

This is intended for use by AWS Direct Connect partners only.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation DescribeHostedConnections for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" A server-side error occurred during the API call. The error message will contain additional details about the cause.

  • ErrCodeClientException "ClientException" The API was called with invalid parameters. The error message will contain additional details about the cause.

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeHostedConnections

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directconnect"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := directconnect.New(sess)

	params := &directconnect.DescribeHostedConnectionsInput{
		ConnectionId: aws.String("ConnectionId"), // Required
	}
	resp, err := svc.DescribeHostedConnections(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*DirectConnect) DescribeHostedConnectionsRequest

func (c *DirectConnect) DescribeHostedConnectionsRequest(input *DescribeHostedConnectionsInput) (req *request.Request, output *Connections)

DescribeHostedConnectionsRequest generates a "aws/request.Request" representing the client's request for the DescribeHostedConnections operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeHostedConnections for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeHostedConnections method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeHostedConnectionsRequest method.
req, resp := client.DescribeHostedConnectionsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeHostedConnections

func (*DirectConnect) DescribeHostedConnectionsWithContext

func (c *DirectConnect) DescribeHostedConnectionsWithContext(ctx aws.Context, input *DescribeHostedConnectionsInput, opts ...request.Option) (*Connections, error)

DescribeHostedConnectionsWithContext is the same as DescribeHostedConnections with the addition of the ability to pass a context and additional request options.

See DescribeHostedConnections for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) DescribeInterconnectLoa

func (c *DirectConnect) DescribeInterconnectLoa(input *DescribeInterconnectLoaInput) (*DescribeInterconnectLoaOutput, error)

DescribeInterconnectLoa API operation for AWS Direct Connect.

Deprecated in favor of DescribeLoa.

Returns the LOA-CFA for an Interconnect.

The Letter of Authorization - Connecting Facility Assignment (LOA-CFA) is a document that is used when establishing your cross connect to AWS at the colocation facility. For more information, see Requesting Cross Connects at AWS Direct Connect Locations (http://docs.aws.amazon.com/directconnect/latest/UserGuide/Colocation.html) in the AWS Direct Connect user guide.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation DescribeInterconnectLoa for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" A server-side error occurred during the API call. The error message will contain additional details about the cause.

  • ErrCodeClientException "ClientException" The API was called with invalid parameters. The error message will contain additional details about the cause.

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeInterconnectLoa

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directconnect"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := directconnect.New(sess)

	params := &directconnect.DescribeInterconnectLoaInput{
		InterconnectId: aws.String("InterconnectId"), // Required
		LoaContentType: aws.String("LoaContentType"),
		ProviderName:   aws.String("ProviderName"),
	}
	resp, err := svc.DescribeInterconnectLoa(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*DirectConnect) DescribeInterconnectLoaRequest

func (c *DirectConnect) DescribeInterconnectLoaRequest(input *DescribeInterconnectLoaInput) (req *request.Request, output *DescribeInterconnectLoaOutput)

DescribeInterconnectLoaRequest generates a "aws/request.Request" representing the client's request for the DescribeInterconnectLoa operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeInterconnectLoa for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeInterconnectLoa method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeInterconnectLoaRequest method.
req, resp := client.DescribeInterconnectLoaRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeInterconnectLoa

func (*DirectConnect) DescribeInterconnectLoaWithContext

func (c *DirectConnect) DescribeInterconnectLoaWithContext(ctx aws.Context, input *DescribeInterconnectLoaInput, opts ...request.Option) (*DescribeInterconnectLoaOutput, error)

DescribeInterconnectLoaWithContext is the same as DescribeInterconnectLoa with the addition of the ability to pass a context and additional request options.

See DescribeInterconnectLoa for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) DescribeInterconnects

func (c *DirectConnect) DescribeInterconnects(input *DescribeInterconnectsInput) (*DescribeInterconnectsOutput, error)

DescribeInterconnects API operation for AWS Direct Connect.

Returns a list of interconnects owned by the AWS account.

If an interconnect ID is provided, it will only return this particular interconnect.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation DescribeInterconnects for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" A server-side error occurred during the API call. The error message will contain additional details about the cause.

  • ErrCodeClientException "ClientException" The API was called with invalid parameters. The error message will contain additional details about the cause.

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeInterconnects

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directconnect"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := directconnect.New(sess)

	params := &directconnect.DescribeInterconnectsInput{
		InterconnectId: aws.String("InterconnectId"),
	}
	resp, err := svc.DescribeInterconnects(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*DirectConnect) DescribeInterconnectsRequest

func (c *DirectConnect) DescribeInterconnectsRequest(input *DescribeInterconnectsInput) (req *request.Request, output *DescribeInterconnectsOutput)

DescribeInterconnectsRequest generates a "aws/request.Request" representing the client's request for the DescribeInterconnects operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeInterconnects for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeInterconnects method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeInterconnectsRequest method.
req, resp := client.DescribeInterconnectsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeInterconnects

func (*DirectConnect) DescribeInterconnectsWithContext

func (c *DirectConnect) DescribeInterconnectsWithContext(ctx aws.Context, input *DescribeInterconnectsInput, opts ...request.Option) (*DescribeInterconnectsOutput, error)

DescribeInterconnectsWithContext is the same as DescribeInterconnects with the addition of the ability to pass a context and additional request options.

See DescribeInterconnects for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) DescribeLags

func (c *DirectConnect) DescribeLags(input *DescribeLagsInput) (*DescribeLagsOutput, error)

DescribeLags API operation for AWS Direct Connect.

Describes the link aggregation groups (LAGs) in your account.

If a LAG ID is provided, only information about the specified LAG is returned.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation DescribeLags for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" A server-side error occurred during the API call. The error message will contain additional details about the cause.

  • ErrCodeClientException "ClientException" The API was called with invalid parameters. The error message will contain additional details about the cause.

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeLags

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directconnect"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := directconnect.New(sess)

	params := &directconnect.DescribeLagsInput{
		LagId: aws.String("LagId"),
	}
	resp, err := svc.DescribeLags(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*DirectConnect) DescribeLagsRequest

func (c *DirectConnect) DescribeLagsRequest(input *DescribeLagsInput) (req *request.Request, output *DescribeLagsOutput)

DescribeLagsRequest generates a "aws/request.Request" representing the client's request for the DescribeLags operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeLags for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeLags method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeLagsRequest method.
req, resp := client.DescribeLagsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeLags

func (*DirectConnect) DescribeLagsWithContext

func (c *DirectConnect) DescribeLagsWithContext(ctx aws.Context, input *DescribeLagsInput, opts ...request.Option) (*DescribeLagsOutput, error)

DescribeLagsWithContext is the same as DescribeLags with the addition of the ability to pass a context and additional request options.

See DescribeLags for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) DescribeLoa

func (c *DirectConnect) DescribeLoa(input *DescribeLoaInput) (*Loa, error)

DescribeLoa API operation for AWS Direct Connect.

Returns the LOA-CFA for a connection, interconnect, or link aggregation group (LAG).

The Letter of Authorization - Connecting Facility Assignment (LOA-CFA) is a document that is used when establishing your cross connect to AWS at the colocation facility. For more information, see Requesting Cross Connects at AWS Direct Connect Locations (http://docs.aws.amazon.com/directconnect/latest/UserGuide/Colocation.html) in the AWS Direct Connect user guide.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation DescribeLoa for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" A server-side error occurred during the API call. The error message will contain additional details about the cause.

  • ErrCodeClientException "ClientException" The API was called with invalid parameters. The error message will contain additional details about the cause.

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeLoa

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directconnect"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := directconnect.New(sess)

	params := &directconnect.DescribeLoaInput{
		ConnectionId:   aws.String("ConnectionId"), // Required
		LoaContentType: aws.String("LoaContentType"),
		ProviderName:   aws.String("ProviderName"),
	}
	resp, err := svc.DescribeLoa(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*DirectConnect) DescribeLoaRequest

func (c *DirectConnect) DescribeLoaRequest(input *DescribeLoaInput) (req *request.Request, output *Loa)

DescribeLoaRequest generates a "aws/request.Request" representing the client's request for the DescribeLoa operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeLoa for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeLoa method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeLoaRequest method.
req, resp := client.DescribeLoaRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeLoa

func (*DirectConnect) DescribeLoaWithContext

func (c *DirectConnect) DescribeLoaWithContext(ctx aws.Context, input *DescribeLoaInput, opts ...request.Option) (*Loa, error)

DescribeLoaWithContext is the same as DescribeLoa with the addition of the ability to pass a context and additional request options.

See DescribeLoa for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) DescribeLocations

func (c *DirectConnect) DescribeLocations(input *DescribeLocationsInput) (*DescribeLocationsOutput, error)

DescribeLocations API operation for AWS Direct Connect.

Returns the list of AWS Direct Connect locations in the current AWS region. These are the locations that may be selected when calling CreateConnection or CreateInterconnect.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation DescribeLocations for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" A server-side error occurred during the API call. The error message will contain additional details about the cause.

  • ErrCodeClientException "ClientException" The API was called with invalid parameters. The error message will contain additional details about the cause.

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeLocations

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directconnect"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := directconnect.New(sess)

	var params *directconnect.DescribeLocationsInput
	resp, err := svc.DescribeLocations(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*DirectConnect) DescribeLocationsRequest

func (c *DirectConnect) DescribeLocationsRequest(input *DescribeLocationsInput) (req *request.Request, output *DescribeLocationsOutput)

DescribeLocationsRequest generates a "aws/request.Request" representing the client's request for the DescribeLocations operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeLocations for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeLocations method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeLocationsRequest method.
req, resp := client.DescribeLocationsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeLocations

func (*DirectConnect) DescribeLocationsWithContext

func (c *DirectConnect) DescribeLocationsWithContext(ctx aws.Context, input *DescribeLocationsInput, opts ...request.Option) (*DescribeLocationsOutput, error)

DescribeLocationsWithContext is the same as DescribeLocations with the addition of the ability to pass a context and additional request options.

See DescribeLocations for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) DescribeTags

func (c *DirectConnect) DescribeTags(input *DescribeTagsInput) (*DescribeTagsOutput, error)

DescribeTags API operation for AWS Direct Connect.

Describes the tags associated with the specified Direct Connect resources.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation DescribeTags for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" A server-side error occurred during the API call. The error message will contain additional details about the cause.

  • ErrCodeClientException "ClientException" The API was called with invalid parameters. The error message will contain additional details about the cause.

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeTags

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directconnect"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := directconnect.New(sess)

	params := &directconnect.DescribeTagsInput{
		ResourceArns: []*string{ // Required
			aws.String("ResourceArn"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeTags(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*DirectConnect) DescribeTagsRequest

func (c *DirectConnect) DescribeTagsRequest(input *DescribeTagsInput) (req *request.Request, output *DescribeTagsOutput)

DescribeTagsRequest generates a "aws/request.Request" representing the client's request for the DescribeTags operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeTags for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeTags method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeTagsRequest method.
req, resp := client.DescribeTagsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeTags

func (*DirectConnect) DescribeTagsWithContext

func (c *DirectConnect) DescribeTagsWithContext(ctx aws.Context, input *DescribeTagsInput, opts ...request.Option) (*DescribeTagsOutput, error)

DescribeTagsWithContext is the same as DescribeTags with the addition of the ability to pass a context and additional request options.

See DescribeTags for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) DescribeVirtualGateways

func (c *DirectConnect) DescribeVirtualGateways(input *DescribeVirtualGatewaysInput) (*DescribeVirtualGatewaysOutput, error)

DescribeVirtualGateways API operation for AWS Direct Connect.

Returns a list of virtual private gateways owned by the AWS account.

You can create one or more AWS Direct Connect private virtual interfaces linking to a virtual private gateway. A virtual private gateway can be managed via Amazon Virtual Private Cloud (VPC) console or the EC2 CreateVpnGateway (http://docs.aws.amazon.com/AWSEC2/latest/APIReference/ApiReference-query-CreateVpnGateway.html) action.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation DescribeVirtualGateways for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" A server-side error occurred during the API call. The error message will contain additional details about the cause.

  • ErrCodeClientException "ClientException" The API was called with invalid parameters. The error message will contain additional details about the cause.

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeVirtualGateways

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directconnect"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := directconnect.New(sess)

	var params *directconnect.DescribeVirtualGatewaysInput
	resp, err := svc.DescribeVirtualGateways(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*DirectConnect) DescribeVirtualGatewaysRequest

func (c *DirectConnect) DescribeVirtualGatewaysRequest(input *DescribeVirtualGatewaysInput) (req *request.Request, output *DescribeVirtualGatewaysOutput)

DescribeVirtualGatewaysRequest generates a "aws/request.Request" representing the client's request for the DescribeVirtualGateways operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeVirtualGateways for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeVirtualGateways method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeVirtualGatewaysRequest method.
req, resp := client.DescribeVirtualGatewaysRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeVirtualGateways

func (*DirectConnect) DescribeVirtualGatewaysWithContext

func (c *DirectConnect) DescribeVirtualGatewaysWithContext(ctx aws.Context, input *DescribeVirtualGatewaysInput, opts ...request.Option) (*DescribeVirtualGatewaysOutput, error)

DescribeVirtualGatewaysWithContext is the same as DescribeVirtualGateways with the addition of the ability to pass a context and additional request options.

See DescribeVirtualGateways for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) DescribeVirtualInterfaces

func (c *DirectConnect) DescribeVirtualInterfaces(input *DescribeVirtualInterfacesInput) (*DescribeVirtualInterfacesOutput, error)

DescribeVirtualInterfaces API operation for AWS Direct Connect.

Displays all virtual interfaces for an AWS account. Virtual interfaces deleted fewer than 15 minutes before you make the request are also returned. If you specify a connection ID, only the virtual interfaces associated with the connection are returned. If you specify a virtual interface ID, then only a single virtual interface is returned.

A virtual interface (VLAN) transmits the traffic between the AWS Direct Connect location and the customer.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation DescribeVirtualInterfaces for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" A server-side error occurred during the API call. The error message will contain additional details about the cause.

  • ErrCodeClientException "ClientException" The API was called with invalid parameters. The error message will contain additional details about the cause.

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeVirtualInterfaces

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directconnect"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := directconnect.New(sess)

	params := &directconnect.DescribeVirtualInterfacesInput{
		ConnectionId:       aws.String("ConnectionId"),
		VirtualInterfaceId: aws.String("VirtualInterfaceId"),
	}
	resp, err := svc.DescribeVirtualInterfaces(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*DirectConnect) DescribeVirtualInterfacesRequest

func (c *DirectConnect) DescribeVirtualInterfacesRequest(input *DescribeVirtualInterfacesInput) (req *request.Request, output *DescribeVirtualInterfacesOutput)

DescribeVirtualInterfacesRequest generates a "aws/request.Request" representing the client's request for the DescribeVirtualInterfaces operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeVirtualInterfaces for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeVirtualInterfaces method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeVirtualInterfacesRequest method.
req, resp := client.DescribeVirtualInterfacesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DescribeVirtualInterfaces

func (*DirectConnect) DescribeVirtualInterfacesWithContext

func (c *DirectConnect) DescribeVirtualInterfacesWithContext(ctx aws.Context, input *DescribeVirtualInterfacesInput, opts ...request.Option) (*DescribeVirtualInterfacesOutput, error)

DescribeVirtualInterfacesWithContext is the same as DescribeVirtualInterfaces with the addition of the ability to pass a context and additional request options.

See DescribeVirtualInterfaces for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) DisassociateConnectionFromLag

func (c *DirectConnect) DisassociateConnectionFromLag(input *DisassociateConnectionFromLagInput) (*Connection, error)

DisassociateConnectionFromLag API operation for AWS Direct Connect.

Disassociates a connection from a link aggregation group (LAG). The connection is interrupted and re-established as a standalone connection (the connection is not deleted; to delete the connection, use the DeleteConnection request). If the LAG has associated virtual interfaces or hosted connections, they remain associated with the LAG. A disassociated connection owned by an AWS Direct Connect partner is automatically converted to an interconnect.

If disassociating the connection will cause the LAG to fall below its setting for minimum number of operational connections, the request fails, except when it's the last member of the LAG. If all connections are disassociated, the LAG continues to exist as an empty LAG with no physical connections.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation DisassociateConnectionFromLag for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" A server-side error occurred during the API call. The error message will contain additional details about the cause.

  • ErrCodeClientException "ClientException" The API was called with invalid parameters. The error message will contain additional details about the cause.

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DisassociateConnectionFromLag

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directconnect"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := directconnect.New(sess)

	params := &directconnect.DisassociateConnectionFromLagInput{
		ConnectionId: aws.String("ConnectionId"), // Required
		LagId:        aws.String("LagId"),        // Required
	}
	resp, err := svc.DisassociateConnectionFromLag(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*DirectConnect) DisassociateConnectionFromLagRequest

func (c *DirectConnect) DisassociateConnectionFromLagRequest(input *DisassociateConnectionFromLagInput) (req *request.Request, output *Connection)

DisassociateConnectionFromLagRequest generates a "aws/request.Request" representing the client's request for the DisassociateConnectionFromLag operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DisassociateConnectionFromLag for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DisassociateConnectionFromLag method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DisassociateConnectionFromLagRequest method.
req, resp := client.DisassociateConnectionFromLagRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DisassociateConnectionFromLag

func (*DirectConnect) DisassociateConnectionFromLagWithContext

func (c *DirectConnect) DisassociateConnectionFromLagWithContext(ctx aws.Context, input *DisassociateConnectionFromLagInput, opts ...request.Option) (*Connection, error)

DisassociateConnectionFromLagWithContext is the same as DisassociateConnectionFromLag with the addition of the ability to pass a context and additional request options.

See DisassociateConnectionFromLag for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) TagResource

func (c *DirectConnect) TagResource(input *TagResourceInput) (*TagResourceOutput, error)

TagResource API operation for AWS Direct Connect.

Adds the specified tags to the specified Direct Connect resource. Each Direct Connect resource can have a maximum of 50 tags.

Each tag consists of a key and an optional value. If a tag with the same key is already associated with the Direct Connect resource, this action updates its value.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation TagResource for usage and error information.

Returned Error Codes:

  • ErrCodeDuplicateTagKeysException "DuplicateTagKeysException" A tag key was specified more than once.

  • ErrCodeTooManyTagsException "TooManyTagsException" You have reached the limit on the number of tags that can be assigned to a Direct Connect resource.

  • ErrCodeServerException "ServerException" A server-side error occurred during the API call. The error message will contain additional details about the cause.

  • ErrCodeClientException "ClientException" The API was called with invalid parameters. The error message will contain additional details about the cause.

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/TagResource

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directconnect"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := directconnect.New(sess)

	params := &directconnect.TagResourceInput{
		ResourceArn: aws.String("ResourceArn"), // Required
		Tags: []*directconnect.Tag{ // Required
			{ // Required
				Key:   aws.String("TagKey"), // Required
				Value: aws.String("TagValue"),
			},
			// More values...
		},
	}
	resp, err := svc.TagResource(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*DirectConnect) TagResourceRequest

func (c *DirectConnect) TagResourceRequest(input *TagResourceInput) (req *request.Request, output *TagResourceOutput)

TagResourceRequest generates a "aws/request.Request" representing the client's request for the TagResource operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See TagResource for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the TagResource method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the TagResourceRequest method.
req, resp := client.TagResourceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/TagResource

func (*DirectConnect) TagResourceWithContext

func (c *DirectConnect) TagResourceWithContext(ctx aws.Context, input *TagResourceInput, opts ...request.Option) (*TagResourceOutput, error)

TagResourceWithContext is the same as TagResource with the addition of the ability to pass a context and additional request options.

See TagResource for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) UntagResource

func (c *DirectConnect) UntagResource(input *UntagResourceInput) (*UntagResourceOutput, error)

UntagResource API operation for AWS Direct Connect.

Removes one or more tags from the specified Direct Connect resource.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation UntagResource for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" A server-side error occurred during the API call. The error message will contain additional details about the cause.

  • ErrCodeClientException "ClientException" The API was called with invalid parameters. The error message will contain additional details about the cause.

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/UntagResource

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directconnect"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := directconnect.New(sess)

	params := &directconnect.UntagResourceInput{
		ResourceArn: aws.String("ResourceArn"), // Required
		TagKeys: []*string{ // Required
			aws.String("TagKey"), // Required
			// More values...
		},
	}
	resp, err := svc.UntagResource(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*DirectConnect) UntagResourceRequest

func (c *DirectConnect) UntagResourceRequest(input *UntagResourceInput) (req *request.Request, output *UntagResourceOutput)

UntagResourceRequest generates a "aws/request.Request" representing the client's request for the UntagResource operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See UntagResource for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the UntagResource method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the UntagResourceRequest method.
req, resp := client.UntagResourceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/UntagResource

func (*DirectConnect) UntagResourceWithContext

func (c *DirectConnect) UntagResourceWithContext(ctx aws.Context, input *UntagResourceInput, opts ...request.Option) (*UntagResourceOutput, error)

UntagResourceWithContext is the same as UntagResource with the addition of the ability to pass a context and additional request options.

See UntagResource for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*DirectConnect) UpdateLag

func (c *DirectConnect) UpdateLag(input *UpdateLagInput) (*Lag, error)

UpdateLag API operation for AWS Direct Connect.

Updates the attributes of a link aggregation group (LAG).

You can update the following attributes:

  • The name of the LAG.

  • The value for the minimum number of connections that must be operational for the LAG itself to be operational.

When you create a LAG, the default value for the minimum number of operational connections is zero (0). If you update this value, and the number of operational connections falls below the specified value, the LAG will automatically go down to avoid overutilization of the remaining connections. Adjusting this value should be done with care as it could force the LAG down if the value is set higher than the current number of operational connections.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Direct Connect's API operation UpdateLag for usage and error information.

Returned Error Codes:

  • ErrCodeServerException "ServerException" A server-side error occurred during the API call. The error message will contain additional details about the cause.

  • ErrCodeClientException "ClientException" The API was called with invalid parameters. The error message will contain additional details about the cause.

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/UpdateLag

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/directconnect"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := directconnect.New(sess)

	params := &directconnect.UpdateLagInput{
		LagId:        aws.String("LagId"), // Required
		LagName:      aws.String("LagName"),
		MinimumLinks: aws.Int64(1),
	}
	resp, err := svc.UpdateLag(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*DirectConnect) UpdateLagRequest

func (c *DirectConnect) UpdateLagRequest(input *UpdateLagInput) (req *request.Request, output *Lag)

UpdateLagRequest generates a "aws/request.Request" representing the client's request for the UpdateLag operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See UpdateLag for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the UpdateLag method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the UpdateLagRequest method.
req, resp := client.UpdateLagRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/UpdateLag

func (*DirectConnect) UpdateLagWithContext

func (c *DirectConnect) UpdateLagWithContext(ctx aws.Context, input *UpdateLagInput, opts ...request.Option) (*Lag, error)

UpdateLagWithContext is the same as UpdateLag with the addition of the ability to pass a context and additional request options.

See UpdateLag for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

type DisassociateConnectionFromLagInput

type DisassociateConnectionFromLagInput struct {

	// The ID of the connection to disassociate from the LAG.
	//
	// Example: dxcon-abc123
	//
	// Default: None
	//
	// ConnectionId is a required field
	ConnectionId *string `locationName:"connectionId" type:"string" required:"true"`

	// The ID of the LAG.
	//
	// Example: dxlag-abc123
	//
	// Default: None
	//
	// LagId is a required field
	LagId *string `locationName:"lagId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Container for the parameters to the DisassociateConnectionFromLag operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/DisassociateConnectionFromLagRequest

func (DisassociateConnectionFromLagInput) GoString

GoString returns the string representation

func (*DisassociateConnectionFromLagInput) SetConnectionId

SetConnectionId sets the ConnectionId field's value.

func (*DisassociateConnectionFromLagInput) SetLagId

SetLagId sets the LagId field's value.

func (DisassociateConnectionFromLagInput) String

String returns the string representation

func (*DisassociateConnectionFromLagInput) Validate

Validate inspects the fields of the type to determine if they are valid.

type Interconnect

type Interconnect struct {

	// The Direct Connection endpoint which the physical connection terminates on.
	AwsDevice *string `locationName:"awsDevice" type:"string"`

	// Bandwidth of the connection.
	//
	// Example: 1Gbps
	//
	// Default: None
	Bandwidth *string `locationName:"bandwidth" type:"string"`

	// The ID of the interconnect.
	//
	// Example: dxcon-abc123
	InterconnectId *string `locationName:"interconnectId" type:"string"`

	// The name of the interconnect.
	//
	// Example: "1G Interconnect to AWS"
	InterconnectName *string `locationName:"interconnectName" type:"string"`

	// State of the interconnect.
	//
	//    * Requested: The initial state of an interconnect. The interconnect stays
	//    in the requested state until the Letter of Authorization (LOA) is sent
	//    to the customer.
	//
	//    * Pending: The interconnect has been approved, and is being initialized.
	//
	//    * Available: The network link is up, and the interconnect is ready for
	//    use.
	//
	//    * Down: The network link is down.
	//
	//    * Deleting: The interconnect is in the process of being deleted.
	//
	//    * Deleted: The interconnect has been deleted.
	InterconnectState *string `locationName:"interconnectState" type:"string" enum:"InterconnectState"`

	// The ID of the LAG.
	//
	// Example: dxlag-fg5678gh
	LagId *string `locationName:"lagId" type:"string"`

	// The time of the most recent call to DescribeInterconnectLoa for this Interconnect.
	LoaIssueTime *time.Time `locationName:"loaIssueTime" type:"timestamp" timestampFormat:"unix"`

	// Where the connection is located.
	//
	// Example: EqSV5
	//
	// Default: None
	Location *string `locationName:"location" type:"string"`

	// The AWS region where the connection is located.
	//
	// Example: us-east-1
	//
	// Default: None
	Region *string `locationName:"region" type:"string"`
	// contains filtered or unexported fields
}

An interconnect is a connection that can host other connections.

Like a standard AWS Direct Connect connection, an interconnect represents the physical connection between an AWS Direct Connect partner's network and a specific Direct Connect location. An AWS Direct Connect partner who owns an interconnect can provision hosted connections on the interconnect for their end customers, thereby providing the end customers with connectivity to AWS services.

The resources of the interconnect, including bandwidth and VLAN numbers, are shared by all of the hosted connections on the interconnect, and the owner of the interconnect determines how these resources are assigned. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/Interconnect

func (Interconnect) GoString

func (s Interconnect) GoString() string

GoString returns the string representation

func (*Interconnect) SetAwsDevice

func (s *Interconnect) SetAwsDevice(v string) *Interconnect

SetAwsDevice sets the AwsDevice field's value.

func (*Interconnect) SetBandwidth

func (s *Interconnect) SetBandwidth(v string) *Interconnect

SetBandwidth sets the Bandwidth field's value.

func (*Interconnect) SetInterconnectId

func (s *Interconnect) SetInterconnectId(v string) *Interconnect

SetInterconnectId sets the InterconnectId field's value.

func (*Interconnect) SetInterconnectName

func (s *Interconnect) SetInterconnectName(v string) *Interconnect

SetInterconnectName sets the InterconnectName field's value.

func (*Interconnect) SetInterconnectState

func (s *Interconnect) SetInterconnectState(v string) *Interconnect

SetInterconnectState sets the InterconnectState field's value.

func (*Interconnect) SetLagId

func (s *Interconnect) SetLagId(v string) *Interconnect

SetLagId sets the LagId field's value.

func (*Interconnect) SetLoaIssueTime

func (s *Interconnect) SetLoaIssueTime(v time.Time) *Interconnect

SetLoaIssueTime sets the LoaIssueTime field's value.

func (*Interconnect) SetLocation

func (s *Interconnect) SetLocation(v string) *Interconnect

SetLocation sets the Location field's value.

func (*Interconnect) SetRegion

func (s *Interconnect) SetRegion(v string) *Interconnect

SetRegion sets the Region field's value.

func (Interconnect) String

func (s Interconnect) String() string

String returns the string representation

type Lag

type Lag struct {

	// Indicates whether the LAG can host other connections.
	//
	// This is intended for use by AWS Direct Connect partners only.
	AllowsHostedConnections *bool `locationName:"allowsHostedConnections" type:"boolean"`

	// The AWS Direct Connection endpoint that hosts the LAG.
	AwsDevice *string `locationName:"awsDevice" type:"string"`

	// A list of connections bundled by this LAG.
	Connections []*Connection `locationName:"connections" type:"list"`

	// The individual bandwidth of the physical connections bundled by the LAG.
	//
	// Available values: 1Gbps, 10Gbps
	ConnectionsBandwidth *string `locationName:"connectionsBandwidth" type:"string"`

	// The ID of the LAG.
	//
	// Example: dxlag-fg5678gh
	LagId *string `locationName:"lagId" type:"string"`

	// The name of the LAG.
	LagName *string `locationName:"lagName" type:"string"`

	// The state of the LAG.
	//
	//    * Requested: The initial state of a LAG. The LAG stays in the requested
	//    state until the Letter of Authorization (LOA) is available.
	//
	//    * Pending: The LAG has been approved, and is being initialized.
	//
	//    * Available: The network link is established, and the LAG is ready for
	//    use.
	//
	//    * Down: The network link is down.
	//
	//    * Deleting: The LAG is in the process of being deleted.
	//
	//    * Deleted: The LAG has been deleted.
	LagState *string `locationName:"lagState" type:"string" enum:"LagState"`

	// Where the connection is located.
	//
	// Example: EqSV5
	//
	// Default: None
	Location *string `locationName:"location" type:"string"`

	// The minimum number of physical connections that must be operational for the
	// LAG itself to be operational. If the number of operational connections drops
	// below this setting, the LAG state changes to down. This value can help to
	// ensure that a LAG is not overutilized if a significant number of its bundled
	// connections go down.
	MinimumLinks *int64 `locationName:"minimumLinks" type:"integer"`

	// The number of physical connections bundled by the LAG, up to a maximum of
	// 10.
	NumberOfConnections *int64 `locationName:"numberOfConnections" type:"integer"`

	// The owner of the LAG.
	OwnerAccount *string `locationName:"ownerAccount" type:"string"`

	// The AWS region where the connection is located.
	//
	// Example: us-east-1
	//
	// Default: None
	Region *string `locationName:"region" type:"string"`
	// contains filtered or unexported fields
}

Describes a link aggregation group (LAG). A LAG is a connection that uses the Link Aggregation Control Protocol (LACP) to logically aggregate a bundle of physical connections. Like an interconnect, it can host other connections. All connections in a LAG must terminate on the same physical AWS Direct Connect endpoint, and must be the same bandwidth. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/Lag

func (Lag) GoString

func (s Lag) GoString() string

GoString returns the string representation

func (*Lag) SetAllowsHostedConnections

func (s *Lag) SetAllowsHostedConnections(v bool) *Lag

SetAllowsHostedConnections sets the AllowsHostedConnections field's value.

func (*Lag) SetAwsDevice

func (s *Lag) SetAwsDevice(v string) *Lag

SetAwsDevice sets the AwsDevice field's value.

func (*Lag) SetConnections

func (s *Lag) SetConnections(v []*Connection) *Lag

SetConnections sets the Connections field's value.

func (*Lag) SetConnectionsBandwidth

func (s *Lag) SetConnectionsBandwidth(v string) *Lag

SetConnectionsBandwidth sets the ConnectionsBandwidth field's value.

func (*Lag) SetLagId

func (s *Lag) SetLagId(v string) *Lag

SetLagId sets the LagId field's value.

func (*Lag) SetLagName

func (s *Lag) SetLagName(v string) *Lag

SetLagName sets the LagName field's value.

func (*Lag) SetLagState

func (s *Lag) SetLagState(v string) *Lag

SetLagState sets the LagState field's value.

func (*Lag) SetLocation

func (s *Lag) SetLocation(v string) *Lag

SetLocation sets the Location field's value.

func (s *Lag) SetMinimumLinks(v int64) *Lag

SetMinimumLinks sets the MinimumLinks field's value.

func (*Lag) SetNumberOfConnections

func (s *Lag) SetNumberOfConnections(v int64) *Lag

SetNumberOfConnections sets the NumberOfConnections field's value.

func (*Lag) SetOwnerAccount

func (s *Lag) SetOwnerAccount(v string) *Lag

SetOwnerAccount sets the OwnerAccount field's value.

func (*Lag) SetRegion

func (s *Lag) SetRegion(v string) *Lag

SetRegion sets the Region field's value.

func (Lag) String

func (s Lag) String() string

String returns the string representation

type Loa

type Loa struct {

	// The binary contents of the LOA-CFA document.
	//
	// LoaContent is automatically base64 encoded/decoded by the SDK.
	LoaContent []byte `locationName:"loaContent" type:"blob"`

	// A standard media type indicating the content type of the LOA-CFA document.
	// Currently, the only supported value is "application/pdf".
	//
	// Default: application/pdf
	LoaContentType *string `locationName:"loaContentType" type:"string" enum:"LoaContentType"`
	// contains filtered or unexported fields
}

A structure containing the Letter of Authorization - Connecting Facility Assignment (LOA-CFA) for a connection. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/Loa

func (Loa) GoString

func (s Loa) GoString() string

GoString returns the string representation

func (*Loa) SetLoaContent

func (s *Loa) SetLoaContent(v []byte) *Loa

SetLoaContent sets the LoaContent field's value.

func (*Loa) SetLoaContentType

func (s *Loa) SetLoaContentType(v string) *Loa

SetLoaContentType sets the LoaContentType field's value.

func (Loa) String

func (s Loa) String() string

String returns the string representation

type Location

type Location struct {

	// The code used to indicate the AWS Direct Connect location.
	LocationCode *string `locationName:"locationCode" type:"string"`

	// The name of the AWS Direct Connect location. The name includes the colocation
	// partner name and the physical site of the lit building.
	LocationName *string `locationName:"locationName" type:"string"`
	// contains filtered or unexported fields
}

An AWS Direct Connect location where connections and interconnects can be requested. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/Location

func (Location) GoString

func (s Location) GoString() string

GoString returns the string representation

func (*Location) SetLocationCode

func (s *Location) SetLocationCode(v string) *Location

SetLocationCode sets the LocationCode field's value.

func (*Location) SetLocationName

func (s *Location) SetLocationName(v string) *Location

SetLocationName sets the LocationName field's value.

func (Location) String

func (s Location) String() string

String returns the string representation

type NewBGPPeer

type NewBGPPeer struct {

	// Indicates the address family for the BGP peer.
	//
	//    * ipv4: IPv4 address family
	//
	//    * ipv6: IPv6 address family
	AddressFamily *string `locationName:"addressFamily" type:"string" enum:"AddressFamily"`

	// IP address assigned to the Amazon interface.
	//
	// Example: 192.168.1.1/30 or 2001:db8::1/125
	AmazonAddress *string `locationName:"amazonAddress" type:"string"`

	// The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
	//
	// Example: 65000
	Asn *int64 `locationName:"asn" type:"integer"`

	// The authentication key for BGP configuration.
	//
	// Example: asdf34example
	AuthKey *string `locationName:"authKey" type:"string"`

	// IP address assigned to the customer interface.
	//
	// Example: 192.168.1.2/30 or 2001:db8::2/125
	CustomerAddress *string `locationName:"customerAddress" type:"string"`
	// contains filtered or unexported fields
}

A structure containing information about a new BGP peer. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/NewBGPPeer

func (NewBGPPeer) GoString

func (s NewBGPPeer) GoString() string

GoString returns the string representation

func (*NewBGPPeer) SetAddressFamily

func (s *NewBGPPeer) SetAddressFamily(v string) *NewBGPPeer

SetAddressFamily sets the AddressFamily field's value.

func (*NewBGPPeer) SetAmazonAddress

func (s *NewBGPPeer) SetAmazonAddress(v string) *NewBGPPeer

SetAmazonAddress sets the AmazonAddress field's value.

func (*NewBGPPeer) SetAsn

func (s *NewBGPPeer) SetAsn(v int64) *NewBGPPeer

SetAsn sets the Asn field's value.

func (*NewBGPPeer) SetAuthKey

func (s *NewBGPPeer) SetAuthKey(v string) *NewBGPPeer

SetAuthKey sets the AuthKey field's value.

func (*NewBGPPeer) SetCustomerAddress

func (s *NewBGPPeer) SetCustomerAddress(v string) *NewBGPPeer

SetCustomerAddress sets the CustomerAddress field's value.

func (NewBGPPeer) String

func (s NewBGPPeer) String() string

String returns the string representation

type NewPrivateVirtualInterface

type NewPrivateVirtualInterface struct {

	// Indicates the address family for the BGP peer.
	//
	//    * ipv4: IPv4 address family
	//
	//    * ipv6: IPv6 address family
	AddressFamily *string `locationName:"addressFamily" type:"string" enum:"AddressFamily"`

	// IP address assigned to the Amazon interface.
	//
	// Example: 192.168.1.1/30 or 2001:db8::1/125
	AmazonAddress *string `locationName:"amazonAddress" type:"string"`

	// The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
	//
	// Example: 65000
	//
	// Asn is a required field
	Asn *int64 `locationName:"asn" type:"integer" required:"true"`

	// The authentication key for BGP configuration.
	//
	// Example: asdf34example
	AuthKey *string `locationName:"authKey" type:"string"`

	// IP address assigned to the customer interface.
	//
	// Example: 192.168.1.2/30 or 2001:db8::2/125
	CustomerAddress *string `locationName:"customerAddress" type:"string"`

	// The ID of the virtual private gateway to a VPC. This only applies to private
	// virtual interfaces.
	//
	// Example: vgw-123er56
	//
	// VirtualGatewayId is a required field
	VirtualGatewayId *string `locationName:"virtualGatewayId" type:"string" required:"true"`

	// The name of the virtual interface assigned by the customer.
	//
	// Example: "My VPC"
	//
	// VirtualInterfaceName is a required field
	VirtualInterfaceName *string `locationName:"virtualInterfaceName" type:"string" required:"true"`

	// The VLAN ID.
	//
	// Example: 101
	//
	// Vlan is a required field
	Vlan *int64 `locationName:"vlan" type:"integer" required:"true"`
	// contains filtered or unexported fields
}

A structure containing information about a new private virtual interface. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/NewPrivateVirtualInterface

func (NewPrivateVirtualInterface) GoString

func (s NewPrivateVirtualInterface) GoString() string

GoString returns the string representation

func (*NewPrivateVirtualInterface) SetAddressFamily

SetAddressFamily sets the AddressFamily field's value.

func (*NewPrivateVirtualInterface) SetAmazonAddress

SetAmazonAddress sets the AmazonAddress field's value.

func (*NewPrivateVirtualInterface) SetAsn

SetAsn sets the Asn field's value.

func (*NewPrivateVirtualInterface) SetAuthKey

SetAuthKey sets the AuthKey field's value.

func (*NewPrivateVirtualInterface) SetCustomerAddress

SetCustomerAddress sets the CustomerAddress field's value.

func (*NewPrivateVirtualInterface) SetVirtualGatewayId

SetVirtualGatewayId sets the VirtualGatewayId field's value.

func (*NewPrivateVirtualInterface) SetVirtualInterfaceName

func (s *NewPrivateVirtualInterface) SetVirtualInterfaceName(v string) *NewPrivateVirtualInterface

SetVirtualInterfaceName sets the VirtualInterfaceName field's value.

func (*NewPrivateVirtualInterface) SetVlan

SetVlan sets the Vlan field's value.

func (NewPrivateVirtualInterface) String

String returns the string representation

func (*NewPrivateVirtualInterface) Validate

func (s *NewPrivateVirtualInterface) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type NewPrivateVirtualInterfaceAllocation

type NewPrivateVirtualInterfaceAllocation struct {

	// Indicates the address family for the BGP peer.
	//
	//    * ipv4: IPv4 address family
	//
	//    * ipv6: IPv6 address family
	AddressFamily *string `locationName:"addressFamily" type:"string" enum:"AddressFamily"`

	// IP address assigned to the Amazon interface.
	//
	// Example: 192.168.1.1/30 or 2001:db8::1/125
	AmazonAddress *string `locationName:"amazonAddress" type:"string"`

	// The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
	//
	// Example: 65000
	//
	// Asn is a required field
	Asn *int64 `locationName:"asn" type:"integer" required:"true"`

	// The authentication key for BGP configuration.
	//
	// Example: asdf34example
	AuthKey *string `locationName:"authKey" type:"string"`

	// IP address assigned to the customer interface.
	//
	// Example: 192.168.1.2/30 or 2001:db8::2/125
	CustomerAddress *string `locationName:"customerAddress" type:"string"`

	// The name of the virtual interface assigned by the customer.
	//
	// Example: "My VPC"
	//
	// VirtualInterfaceName is a required field
	VirtualInterfaceName *string `locationName:"virtualInterfaceName" type:"string" required:"true"`

	// The VLAN ID.
	//
	// Example: 101
	//
	// Vlan is a required field
	Vlan *int64 `locationName:"vlan" type:"integer" required:"true"`
	// contains filtered or unexported fields
}

A structure containing information about a private virtual interface that will be provisioned on a connection. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/NewPrivateVirtualInterfaceAllocation

func (NewPrivateVirtualInterfaceAllocation) GoString

GoString returns the string representation

func (*NewPrivateVirtualInterfaceAllocation) SetAddressFamily

SetAddressFamily sets the AddressFamily field's value.

func (*NewPrivateVirtualInterfaceAllocation) SetAmazonAddress

SetAmazonAddress sets the AmazonAddress field's value.

func (*NewPrivateVirtualInterfaceAllocation) SetAsn

SetAsn sets the Asn field's value.

func (*NewPrivateVirtualInterfaceAllocation) SetAuthKey

SetAuthKey sets the AuthKey field's value.

func (*NewPrivateVirtualInterfaceAllocation) SetCustomerAddress

SetCustomerAddress sets the CustomerAddress field's value.

func (*NewPrivateVirtualInterfaceAllocation) SetVirtualInterfaceName

SetVirtualInterfaceName sets the VirtualInterfaceName field's value.

func (*NewPrivateVirtualInterfaceAllocation) SetVlan

SetVlan sets the Vlan field's value.

func (NewPrivateVirtualInterfaceAllocation) String

String returns the string representation

func (*NewPrivateVirtualInterfaceAllocation) Validate

Validate inspects the fields of the type to determine if they are valid.

type NewPublicVirtualInterface

type NewPublicVirtualInterface struct {

	// Indicates the address family for the BGP peer.
	//
	//    * ipv4: IPv4 address family
	//
	//    * ipv6: IPv6 address family
	AddressFamily *string `locationName:"addressFamily" type:"string" enum:"AddressFamily"`

	// IP address assigned to the Amazon interface.
	//
	// Example: 192.168.1.1/30 or 2001:db8::1/125
	AmazonAddress *string `locationName:"amazonAddress" type:"string"`

	// The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
	//
	// Example: 65000
	//
	// Asn is a required field
	Asn *int64 `locationName:"asn" type:"integer" required:"true"`

	// The authentication key for BGP configuration.
	//
	// Example: asdf34example
	AuthKey *string `locationName:"authKey" type:"string"`

	// IP address assigned to the customer interface.
	//
	// Example: 192.168.1.2/30 or 2001:db8::2/125
	CustomerAddress *string `locationName:"customerAddress" type:"string"`

	// A list of routes to be advertised to the AWS network in this region (public
	// virtual interface).
	RouteFilterPrefixes []*RouteFilterPrefix `locationName:"routeFilterPrefixes" type:"list"`

	// The name of the virtual interface assigned by the customer.
	//
	// Example: "My VPC"
	//
	// VirtualInterfaceName is a required field
	VirtualInterfaceName *string `locationName:"virtualInterfaceName" type:"string" required:"true"`

	// The VLAN ID.
	//
	// Example: 101
	//
	// Vlan is a required field
	Vlan *int64 `locationName:"vlan" type:"integer" required:"true"`
	// contains filtered or unexported fields
}

A structure containing information about a new public virtual interface. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/NewPublicVirtualInterface

func (NewPublicVirtualInterface) GoString

func (s NewPublicVirtualInterface) GoString() string

GoString returns the string representation

func (*NewPublicVirtualInterface) SetAddressFamily

SetAddressFamily sets the AddressFamily field's value.

func (*NewPublicVirtualInterface) SetAmazonAddress

SetAmazonAddress sets the AmazonAddress field's value.

func (*NewPublicVirtualInterface) SetAsn

SetAsn sets the Asn field's value.

func (*NewPublicVirtualInterface) SetAuthKey

SetAuthKey sets the AuthKey field's value.

func (*NewPublicVirtualInterface) SetCustomerAddress

SetCustomerAddress sets the CustomerAddress field's value.

func (*NewPublicVirtualInterface) SetRouteFilterPrefixes

SetRouteFilterPrefixes sets the RouteFilterPrefixes field's value.

func (*NewPublicVirtualInterface) SetVirtualInterfaceName

func (s *NewPublicVirtualInterface) SetVirtualInterfaceName(v string) *NewPublicVirtualInterface

SetVirtualInterfaceName sets the VirtualInterfaceName field's value.

func (*NewPublicVirtualInterface) SetVlan

SetVlan sets the Vlan field's value.

func (NewPublicVirtualInterface) String

func (s NewPublicVirtualInterface) String() string

String returns the string representation

func (*NewPublicVirtualInterface) Validate

func (s *NewPublicVirtualInterface) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type NewPublicVirtualInterfaceAllocation

type NewPublicVirtualInterfaceAllocation struct {

	// Indicates the address family for the BGP peer.
	//
	//    * ipv4: IPv4 address family
	//
	//    * ipv6: IPv6 address family
	AddressFamily *string `locationName:"addressFamily" type:"string" enum:"AddressFamily"`

	// IP address assigned to the Amazon interface.
	//
	// Example: 192.168.1.1/30 or 2001:db8::1/125
	AmazonAddress *string `locationName:"amazonAddress" type:"string"`

	// The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
	//
	// Example: 65000
	//
	// Asn is a required field
	Asn *int64 `locationName:"asn" type:"integer" required:"true"`

	// The authentication key for BGP configuration.
	//
	// Example: asdf34example
	AuthKey *string `locationName:"authKey" type:"string"`

	// IP address assigned to the customer interface.
	//
	// Example: 192.168.1.2/30 or 2001:db8::2/125
	CustomerAddress *string `locationName:"customerAddress" type:"string"`

	// A list of routes to be advertised to the AWS network in this region (public
	// virtual interface).
	RouteFilterPrefixes []*RouteFilterPrefix `locationName:"routeFilterPrefixes" type:"list"`

	// The name of the virtual interface assigned by the customer.
	//
	// Example: "My VPC"
	//
	// VirtualInterfaceName is a required field
	VirtualInterfaceName *string `locationName:"virtualInterfaceName" type:"string" required:"true"`

	// The VLAN ID.
	//
	// Example: 101
	//
	// Vlan is a required field
	Vlan *int64 `locationName:"vlan" type:"integer" required:"true"`
	// contains filtered or unexported fields
}

A structure containing information about a public virtual interface that will be provisioned on a connection. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/NewPublicVirtualInterfaceAllocation

func (NewPublicVirtualInterfaceAllocation) GoString

GoString returns the string representation

func (*NewPublicVirtualInterfaceAllocation) SetAddressFamily

SetAddressFamily sets the AddressFamily field's value.

func (*NewPublicVirtualInterfaceAllocation) SetAmazonAddress

SetAmazonAddress sets the AmazonAddress field's value.

func (*NewPublicVirtualInterfaceAllocation) SetAsn

SetAsn sets the Asn field's value.

func (*NewPublicVirtualInterfaceAllocation) SetAuthKey

SetAuthKey sets the AuthKey field's value.

func (*NewPublicVirtualInterfaceAllocation) SetCustomerAddress

SetCustomerAddress sets the CustomerAddress field's value.

func (*NewPublicVirtualInterfaceAllocation) SetRouteFilterPrefixes

SetRouteFilterPrefixes sets the RouteFilterPrefixes field's value.

func (*NewPublicVirtualInterfaceAllocation) SetVirtualInterfaceName

SetVirtualInterfaceName sets the VirtualInterfaceName field's value.

func (*NewPublicVirtualInterfaceAllocation) SetVlan

SetVlan sets the Vlan field's value.

func (NewPublicVirtualInterfaceAllocation) String

String returns the string representation

func (*NewPublicVirtualInterfaceAllocation) Validate

Validate inspects the fields of the type to determine if they are valid.

type ResourceTag

type ResourceTag struct {

	// The Amazon Resource Name (ARN) of the Direct Connect resource.
	ResourceArn *string `locationName:"resourceArn" type:"string"`

	// The tags.
	Tags []*Tag `locationName:"tags" min:"1" type:"list"`
	// contains filtered or unexported fields
}

The tags associated with a Direct Connect resource. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/ResourceTag

func (ResourceTag) GoString

func (s ResourceTag) GoString() string

GoString returns the string representation

func (*ResourceTag) SetResourceArn

func (s *ResourceTag) SetResourceArn(v string) *ResourceTag

SetResourceArn sets the ResourceArn field's value.

func (*ResourceTag) SetTags

func (s *ResourceTag) SetTags(v []*Tag) *ResourceTag

SetTags sets the Tags field's value.

func (ResourceTag) String

func (s ResourceTag) String() string

String returns the string representation

type RouteFilterPrefix

type RouteFilterPrefix struct {

	// CIDR notation for the advertised route. Multiple routes are separated by
	// commas.
	//
	// IPv6 CIDRs must be at least a /64 or shorter
	//
	// Example: 10.10.10.0/24,10.10.11.0/24,2001:db8::/64
	Cidr *string `locationName:"cidr" type:"string"`
	// contains filtered or unexported fields
}

A route filter prefix that the customer can advertise through Border Gateway Protocol (BGP) over a public virtual interface. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/RouteFilterPrefix

func (RouteFilterPrefix) GoString

func (s RouteFilterPrefix) GoString() string

GoString returns the string representation

func (*RouteFilterPrefix) SetCidr

SetCidr sets the Cidr field's value.

func (RouteFilterPrefix) String

func (s RouteFilterPrefix) String() string

String returns the string representation

type Tag

type Tag struct {

	// The key of the tag.
	//
	// Key is a required field
	Key *string `locationName:"key" min:"1" type:"string" required:"true"`

	// The value of the tag.
	Value *string `locationName:"value" type:"string"`
	// contains filtered or unexported fields
}

Information about a tag. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/Tag

func (Tag) GoString

func (s Tag) GoString() string

GoString returns the string representation

func (*Tag) SetKey

func (s *Tag) SetKey(v string) *Tag

SetKey sets the Key field's value.

func (*Tag) SetValue

func (s *Tag) SetValue(v string) *Tag

SetValue sets the Value field's value.

func (Tag) String

func (s Tag) String() string

String returns the string representation

func (*Tag) Validate

func (s *Tag) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type TagResourceInput

type TagResourceInput struct {

	// The Amazon Resource Name (ARN) of the Direct Connect resource.
	//
	// Example: arn:aws:directconnect:us-east-1:123456789012:dxcon/dxcon-fg5678gh
	//
	// ResourceArn is a required field
	ResourceArn *string `locationName:"resourceArn" type:"string" required:"true"`

	// The list of tags to add.
	//
	// Tags is a required field
	Tags []*Tag `locationName:"tags" min:"1" type:"list" required:"true"`
	// contains filtered or unexported fields
}

Container for the parameters to the TagResource operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/TagResourceRequest

func (TagResourceInput) GoString

func (s TagResourceInput) GoString() string

GoString returns the string representation

func (*TagResourceInput) SetResourceArn

func (s *TagResourceInput) SetResourceArn(v string) *TagResourceInput

SetResourceArn sets the ResourceArn field's value.

func (*TagResourceInput) SetTags

func (s *TagResourceInput) SetTags(v []*Tag) *TagResourceInput

SetTags sets the Tags field's value.

func (TagResourceInput) String

func (s TagResourceInput) String() string

String returns the string representation

func (*TagResourceInput) Validate

func (s *TagResourceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type TagResourceOutput

type TagResourceOutput struct {
	// contains filtered or unexported fields
}

The response received when TagResource is called. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/TagResourceResponse

func (TagResourceOutput) GoString

func (s TagResourceOutput) GoString() string

GoString returns the string representation

func (TagResourceOutput) String

func (s TagResourceOutput) String() string

String returns the string representation

type UntagResourceInput

type UntagResourceInput struct {

	// The Amazon Resource Name (ARN) of the Direct Connect resource.
	//
	// ResourceArn is a required field
	ResourceArn *string `locationName:"resourceArn" type:"string" required:"true"`

	// The list of tag keys to remove.
	//
	// TagKeys is a required field
	TagKeys []*string `locationName:"tagKeys" type:"list" required:"true"`
	// contains filtered or unexported fields
}

Container for the parameters to the UntagResource operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/UntagResourceRequest

func (UntagResourceInput) GoString

func (s UntagResourceInput) GoString() string

GoString returns the string representation

func (*UntagResourceInput) SetResourceArn

func (s *UntagResourceInput) SetResourceArn(v string) *UntagResourceInput

SetResourceArn sets the ResourceArn field's value.

func (*UntagResourceInput) SetTagKeys

func (s *UntagResourceInput) SetTagKeys(v []*string) *UntagResourceInput

SetTagKeys sets the TagKeys field's value.

func (UntagResourceInput) String

func (s UntagResourceInput) String() string

String returns the string representation

func (*UntagResourceInput) Validate

func (s *UntagResourceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type UntagResourceOutput

type UntagResourceOutput struct {
	// contains filtered or unexported fields
}

The response received when UntagResource is called. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/UntagResourceResponse

func (UntagResourceOutput) GoString

func (s UntagResourceOutput) GoString() string

GoString returns the string representation

func (UntagResourceOutput) String

func (s UntagResourceOutput) String() string

String returns the string representation

type UpdateLagInput

type UpdateLagInput struct {

	// The ID of the LAG to update.
	//
	// Example: dxlag-abc123
	//
	// Default: None
	//
	// LagId is a required field
	LagId *string `locationName:"lagId" type:"string" required:"true"`

	// The name for the LAG.
	//
	// Example: "3x10G LAG to AWS"
	//
	// Default: None
	LagName *string `locationName:"lagName" type:"string"`

	// The minimum number of physical connections that must be operational for the
	// LAG itself to be operational.
	//
	// Default: None
	MinimumLinks *int64 `locationName:"minimumLinks" type:"integer"`
	// contains filtered or unexported fields
}

Container for the parameters to the UpdateLag operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/UpdateLagRequest

func (UpdateLagInput) GoString

func (s UpdateLagInput) GoString() string

GoString returns the string representation

func (*UpdateLagInput) SetLagId

func (s *UpdateLagInput) SetLagId(v string) *UpdateLagInput

SetLagId sets the LagId field's value.

func (*UpdateLagInput) SetLagName

func (s *UpdateLagInput) SetLagName(v string) *UpdateLagInput

SetLagName sets the LagName field's value.

func (s *UpdateLagInput) SetMinimumLinks(v int64) *UpdateLagInput

SetMinimumLinks sets the MinimumLinks field's value.

func (UpdateLagInput) String

func (s UpdateLagInput) String() string

String returns the string representation

func (*UpdateLagInput) Validate

func (s *UpdateLagInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type VirtualGateway

type VirtualGateway struct {

	// The ID of the virtual private gateway to a VPC. This only applies to private
	// virtual interfaces.
	//
	// Example: vgw-123er56
	VirtualGatewayId *string `locationName:"virtualGatewayId" type:"string"`

	// State of the virtual private gateway.
	//
	//    * Pending: This is the initial state after calling CreateVpnGateway.
	//
	//    * Available: Ready for use by a private virtual interface.
	//
	//    * Deleting: This is the initial state after calling DeleteVpnGateway.
	//
	//    * Deleted: In this state, a private virtual interface is unable to send
	//    traffic over this gateway.
	VirtualGatewayState *string `locationName:"virtualGatewayState" type:"string"`
	// contains filtered or unexported fields
}

You can create one or more AWS Direct Connect private virtual interfaces linking to your virtual private gateway.

Virtual private gateways can be managed using the Amazon Virtual Private Cloud (Amazon VPC) console or the Amazon EC2 CreateVpnGateway action (http://docs.aws.amazon.com/AWSEC2/latest/APIReference/ApiReference-query-CreateVpnGateway.html). Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/VirtualGateway

func (VirtualGateway) GoString

func (s VirtualGateway) GoString() string

GoString returns the string representation

func (*VirtualGateway) SetVirtualGatewayId

func (s *VirtualGateway) SetVirtualGatewayId(v string) *VirtualGateway

SetVirtualGatewayId sets the VirtualGatewayId field's value.

func (*VirtualGateway) SetVirtualGatewayState

func (s *VirtualGateway) SetVirtualGatewayState(v string) *VirtualGateway

SetVirtualGatewayState sets the VirtualGatewayState field's value.

func (VirtualGateway) String

func (s VirtualGateway) String() string

String returns the string representation

type VirtualInterface

type VirtualInterface struct {

	// Indicates the address family for the BGP peer.
	//
	//    * ipv4: IPv4 address family
	//
	//    * ipv6: IPv6 address family
	AddressFamily *string `locationName:"addressFamily" type:"string" enum:"AddressFamily"`

	// IP address assigned to the Amazon interface.
	//
	// Example: 192.168.1.1/30 or 2001:db8::1/125
	AmazonAddress *string `locationName:"amazonAddress" type:"string"`

	// The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
	//
	// Example: 65000
	Asn *int64 `locationName:"asn" type:"integer"`

	// The authentication key for BGP configuration.
	//
	// Example: asdf34example
	AuthKey *string `locationName:"authKey" type:"string"`

	// A list of the BGP peers configured on this virtual interface.
	BgpPeers []*BGPPeer `locationName:"bgpPeers" type:"list"`

	// The ID of the connection. This field is also used as the ID type for operations
	// that use multiple connection types (LAG, interconnect, and/or connection).
	//
	// Example: dxcon-fg5678gh
	//
	// Default: None
	ConnectionId *string `locationName:"connectionId" type:"string"`

	// IP address assigned to the customer interface.
	//
	// Example: 192.168.1.2/30 or 2001:db8::2/125
	CustomerAddress *string `locationName:"customerAddress" type:"string"`

	// Information for generating the customer router configuration.
	CustomerRouterConfig *string `locationName:"customerRouterConfig" type:"string"`

	// Where the connection is located.
	//
	// Example: EqSV5
	//
	// Default: None
	Location *string `locationName:"location" type:"string"`

	// The AWS account that will own the new virtual interface.
	OwnerAccount *string `locationName:"ownerAccount" type:"string"`

	// A list of routes to be advertised to the AWS network in this region (public
	// virtual interface).
	RouteFilterPrefixes []*RouteFilterPrefix `locationName:"routeFilterPrefixes" type:"list"`

	// The ID of the virtual private gateway to a VPC. This only applies to private
	// virtual interfaces.
	//
	// Example: vgw-123er56
	VirtualGatewayId *string `locationName:"virtualGatewayId" type:"string"`

	// The ID of the virtual interface.
	//
	// Example: dxvif-123dfg56
	//
	// Default: None
	VirtualInterfaceId *string `locationName:"virtualInterfaceId" type:"string"`

	// The name of the virtual interface assigned by the customer.
	//
	// Example: "My VPC"
	VirtualInterfaceName *string `locationName:"virtualInterfaceName" type:"string"`

	// State of the virtual interface.
	//
	//    * Confirming: The creation of the virtual interface is pending confirmation
	//    from the virtual interface owner. If the owner of the virtual interface
	//    is different from the owner of the connection on which it is provisioned,
	//    then the virtual interface will remain in this state until it is confirmed
	//    by the virtual interface owner.
	//
	//    * Verifying: This state only applies to public virtual interfaces. Each
	//    public virtual interface needs validation before the virtual interface
	//    can be created.
	//
	//    * Pending: A virtual interface is in this state from the time that it
	//    is created until the virtual interface is ready to forward traffic.
	//
	//    * Available: A virtual interface that is able to forward traffic.
	//
	//    * Down: A virtual interface that is BGP down.
	//
	//    * Deleting: A virtual interface is in this state immediately after calling
	//    DeleteVirtualInterface until it can no longer forward traffic.
	//
	//    * Deleted: A virtual interface that cannot forward traffic.
	//
	//    * Rejected: The virtual interface owner has declined creation of the virtual
	//    interface. If a virtual interface in the 'Confirming' state is deleted
	//    by the virtual interface owner, the virtual interface will enter the 'Rejected'
	//    state.
	VirtualInterfaceState *string `locationName:"virtualInterfaceState" type:"string" enum:"VirtualInterfaceState"`

	// The type of virtual interface.
	//
	// Example: private (Amazon VPC) or public (Amazon S3, Amazon DynamoDB, and
	// so on.)
	VirtualInterfaceType *string `locationName:"virtualInterfaceType" type:"string"`

	// The VLAN ID.
	//
	// Example: 101
	Vlan *int64 `locationName:"vlan" type:"integer"`
	// contains filtered or unexported fields
}

A virtual interface (VLAN) transmits the traffic between the AWS Direct Connect location and the customer. Please also see https://docs.aws.amazon.com/goto/WebAPI/directconnect-2012-10-25/VirtualInterface

func (VirtualInterface) GoString

func (s VirtualInterface) GoString() string

GoString returns the string representation

func (*VirtualInterface) SetAddressFamily

func (s *VirtualInterface) SetAddressFamily(v string) *VirtualInterface

SetAddressFamily sets the AddressFamily field's value.

func (*VirtualInterface) SetAmazonAddress

func (s *VirtualInterface) SetAmazonAddress(v string) *VirtualInterface

SetAmazonAddress sets the AmazonAddress field's value.

func (*VirtualInterface) SetAsn

func (s *VirtualInterface) SetAsn(v int64) *VirtualInterface

SetAsn sets the Asn field's value.

func (*VirtualInterface) SetAuthKey

func (s *VirtualInterface) SetAuthKey(v string) *VirtualInterface

SetAuthKey sets the AuthKey field's value.

func (*VirtualInterface) SetBgpPeers

func (s *VirtualInterface) SetBgpPeers(v []*BGPPeer) *VirtualInterface

SetBgpPeers sets the BgpPeers field's value.

func (*VirtualInterface) SetConnectionId

func (s *VirtualInterface) SetConnectionId(v string) *VirtualInterface

SetConnectionId sets the ConnectionId field's value.

func (*VirtualInterface) SetCustomerAddress

func (s *VirtualInterface) SetCustomerAddress(v string) *VirtualInterface

SetCustomerAddress sets the CustomerAddress field's value.

func (*VirtualInterface) SetCustomerRouterConfig

func (s *VirtualInterface) SetCustomerRouterConfig(v string) *VirtualInterface

SetCustomerRouterConfig sets the CustomerRouterConfig field's value.

func (*VirtualInterface) SetLocation

func (s *VirtualInterface) SetLocation(v string) *VirtualInterface

SetLocation sets the Location field's value.

func (*VirtualInterface) SetOwnerAccount

func (s *VirtualInterface) SetOwnerAccount(v string) *VirtualInterface

SetOwnerAccount sets the OwnerAccount field's value.

func (*VirtualInterface) SetRouteFilterPrefixes

func (s *VirtualInterface) SetRouteFilterPrefixes(v []*RouteFilterPrefix) *VirtualInterface

SetRouteFilterPrefixes sets the RouteFilterPrefixes field's value.

func (*VirtualInterface) SetVirtualGatewayId

func (s *VirtualInterface) SetVirtualGatewayId(v string) *VirtualInterface

SetVirtualGatewayId sets the VirtualGatewayId field's value.

func (*VirtualInterface) SetVirtualInterfaceId

func (s *VirtualInterface) SetVirtualInterfaceId(v string) *VirtualInterface

SetVirtualInterfaceId sets the VirtualInterfaceId field's value.

func (*VirtualInterface) SetVirtualInterfaceName

func (s *VirtualInterface) SetVirtualInterfaceName(v string) *VirtualInterface

SetVirtualInterfaceName sets the VirtualInterfaceName field's value.

func (*VirtualInterface) SetVirtualInterfaceState

func (s *VirtualInterface) SetVirtualInterfaceState(v string) *VirtualInterface

SetVirtualInterfaceState sets the VirtualInterfaceState field's value.

func (*VirtualInterface) SetVirtualInterfaceType

func (s *VirtualInterface) SetVirtualInterfaceType(v string) *VirtualInterface

SetVirtualInterfaceType sets the VirtualInterfaceType field's value.

func (*VirtualInterface) SetVlan

func (s *VirtualInterface) SetVlan(v int64) *VirtualInterface

SetVlan sets the Vlan field's value.

func (VirtualInterface) String

func (s VirtualInterface) String() string

String returns the string representation

Directories

Path Synopsis
Package directconnectiface provides an interface to enable mocking the AWS Direct Connect service client for testing your code.
Package directconnectiface provides an interface to enable mocking the AWS Direct Connect service client for testing your code.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL