dynamodb

type ContributorInsights struct {
	pulumi.CustomResourceState

	// The global secondary index name
	IndexName pulumi.StringPtrOutput `pulumi:"indexName"`
	// The name of the table to enable contributor insights
	TableName pulumi.StringOutput `pulumi:"tableName"`
}

type ContributorInsightsArgs struct {
	// The global secondary index name
	IndexName pulumi.StringPtrInput
	// The name of the table to enable contributor insights
	TableName pulumi.StringInput
}

type ContributorInsightsArray []ContributorInsightsInput

type ContributorInsightsArrayInput interface {
	pulumi.Input

	ToContributorInsightsArrayOutput() ContributorInsightsArrayOutput
	ToContributorInsightsArrayOutputWithContext(context.Context) ContributorInsightsArrayOutput
}

type ContributorInsightsArrayOutput struct{ *pulumi.OutputState }

type ContributorInsightsInput interface {
	pulumi.Input

	ToContributorInsightsOutput() ContributorInsightsOutput
	ToContributorInsightsOutputWithContext(ctx context.Context) ContributorInsightsOutput
}

type ContributorInsightsMap map[string]ContributorInsightsInput

type ContributorInsightsMapInput interface {
	pulumi.Input

	ToContributorInsightsMapOutput() ContributorInsightsMapOutput
	ToContributorInsightsMapOutputWithContext(context.Context) ContributorInsightsMapOutput
}

type ContributorInsightsMapOutput struct{ *pulumi.OutputState }

type ContributorInsightsOutput struct{ *pulumi.OutputState }

type ContributorInsightsState struct {
	// The global secondary index name
	IndexName pulumi.StringPtrInput
	// The name of the table to enable contributor insights
	TableName pulumi.StringPtrInput
}

type GetTableAttribute struct {
	// Name of the DynamoDB table.
	Name string `pulumi:"name"`
	Type string `pulumi:"type"`
}

type GetTableAttributeArgs struct {
	// Name of the DynamoDB table.
	Name pulumi.StringInput `pulumi:"name"`
	Type pulumi.StringInput `pulumi:"type"`
}

type GetTableAttributeArray []GetTableAttributeInput

type GetTableAttributeArrayInput interface {
	pulumi.Input

	ToGetTableAttributeArrayOutput() GetTableAttributeArrayOutput
	ToGetTableAttributeArrayOutputWithContext(context.Context) GetTableAttributeArrayOutput
}

type GetTableAttributeArrayOutput struct{ *pulumi.OutputState }

type GetTableAttributeInput interface {
	pulumi.Input

	ToGetTableAttributeOutput() GetTableAttributeOutput
	ToGetTableAttributeOutputWithContext(context.Context) GetTableAttributeOutput
}

type GetTableAttributeOutput struct{ *pulumi.OutputState }

type GetTableGlobalSecondaryIndex struct {
	HashKey string `pulumi:"hashKey"`
	// Name of the DynamoDB table.
	Name             string   `pulumi:"name"`
	NonKeyAttributes []string `pulumi:"nonKeyAttributes"`
	ProjectionType   string   `pulumi:"projectionType"`
	RangeKey         string   `pulumi:"rangeKey"`
	ReadCapacity     int      `pulumi:"readCapacity"`
	WriteCapacity    int      `pulumi:"writeCapacity"`
}

type GetTableGlobalSecondaryIndexArgs struct {
	HashKey pulumi.StringInput `pulumi:"hashKey"`
	// Name of the DynamoDB table.
	Name             pulumi.StringInput      `pulumi:"name"`
	NonKeyAttributes pulumi.StringArrayInput `pulumi:"nonKeyAttributes"`
	ProjectionType   pulumi.StringInput      `pulumi:"projectionType"`
	RangeKey         pulumi.StringInput      `pulumi:"rangeKey"`
	ReadCapacity     pulumi.IntInput         `pulumi:"readCapacity"`
	WriteCapacity    pulumi.IntInput         `pulumi:"writeCapacity"`
}

type GetTableGlobalSecondaryIndexArray []GetTableGlobalSecondaryIndexInput

type GetTableGlobalSecondaryIndexArrayInput interface {
	pulumi.Input

	ToGetTableGlobalSecondaryIndexArrayOutput() GetTableGlobalSecondaryIndexArrayOutput
	ToGetTableGlobalSecondaryIndexArrayOutputWithContext(context.Context) GetTableGlobalSecondaryIndexArrayOutput
}

type GetTableGlobalSecondaryIndexArrayOutput struct{ *pulumi.OutputState }

type GetTableGlobalSecondaryIndexInput interface {
	pulumi.Input

	ToGetTableGlobalSecondaryIndexOutput() GetTableGlobalSecondaryIndexOutput
	ToGetTableGlobalSecondaryIndexOutputWithContext(context.Context) GetTableGlobalSecondaryIndexOutput
}

type GetTableGlobalSecondaryIndexOutput struct{ *pulumi.OutputState }

type GetTableLocalSecondaryIndex struct {
	// Name of the DynamoDB table.
	Name             string   `pulumi:"name"`
	NonKeyAttributes []string `pulumi:"nonKeyAttributes"`
	ProjectionType   string   `pulumi:"projectionType"`
	RangeKey         string   `pulumi:"rangeKey"`
}

type GetTableLocalSecondaryIndexArgs struct {
	// Name of the DynamoDB table.
	Name             pulumi.StringInput      `pulumi:"name"`
	NonKeyAttributes pulumi.StringArrayInput `pulumi:"nonKeyAttributes"`
	ProjectionType   pulumi.StringInput      `pulumi:"projectionType"`
	RangeKey         pulumi.StringInput      `pulumi:"rangeKey"`
}

type GetTableLocalSecondaryIndexArray []GetTableLocalSecondaryIndexInput

type GetTableLocalSecondaryIndexArrayInput interface {
	pulumi.Input

	ToGetTableLocalSecondaryIndexArrayOutput() GetTableLocalSecondaryIndexArrayOutput
	ToGetTableLocalSecondaryIndexArrayOutputWithContext(context.Context) GetTableLocalSecondaryIndexArrayOutput
}

type GetTableLocalSecondaryIndexArrayOutput struct{ *pulumi.OutputState }

type GetTableLocalSecondaryIndexInput interface {
	pulumi.Input

	ToGetTableLocalSecondaryIndexOutput() GetTableLocalSecondaryIndexOutput
	ToGetTableLocalSecondaryIndexOutputWithContext(context.Context) GetTableLocalSecondaryIndexOutput
}

type GetTableLocalSecondaryIndexOutput struct{ *pulumi.OutputState }

type GetTablePointInTimeRecovery struct {
	Enabled bool `pulumi:"enabled"`
}

type GetTablePointInTimeRecoveryArgs struct {
	Enabled pulumi.BoolInput `pulumi:"enabled"`
}

type GetTablePointInTimeRecoveryInput interface {
	pulumi.Input

	ToGetTablePointInTimeRecoveryOutput() GetTablePointInTimeRecoveryOutput
	ToGetTablePointInTimeRecoveryOutputWithContext(context.Context) GetTablePointInTimeRecoveryOutput
}

type GetTablePointInTimeRecoveryOutput struct{ *pulumi.OutputState }

type GetTableReplicaType struct {
	KmsKeyArn  string `pulumi:"kmsKeyArn"`
	RegionName string `pulumi:"regionName"`
}

type GetTableReplicaTypeArgs struct {
	KmsKeyArn  pulumi.StringInput `pulumi:"kmsKeyArn"`
	RegionName pulumi.StringInput `pulumi:"regionName"`
}

type GetTableReplicaTypeArray []GetTableReplicaTypeInput

type GetTableReplicaTypeArrayInput interface {
	pulumi.Input

	ToGetTableReplicaTypeArrayOutput() GetTableReplicaTypeArrayOutput
	ToGetTableReplicaTypeArrayOutputWithContext(context.Context) GetTableReplicaTypeArrayOutput
}

type GetTableReplicaTypeArrayOutput struct{ *pulumi.OutputState }

type GetTableReplicaTypeInput interface {
	pulumi.Input

	ToGetTableReplicaTypeOutput() GetTableReplicaTypeOutput
	ToGetTableReplicaTypeOutputWithContext(context.Context) GetTableReplicaTypeOutput
}

type GetTableReplicaTypeOutput struct{ *pulumi.OutputState }

type GetTableServerSideEncryption struct {
	Enabled   bool   `pulumi:"enabled"`
	KmsKeyArn string `pulumi:"kmsKeyArn"`
}

type GetTableServerSideEncryptionArgs struct {
	Enabled   pulumi.BoolInput   `pulumi:"enabled"`
	KmsKeyArn pulumi.StringInput `pulumi:"kmsKeyArn"`
}

type GetTableServerSideEncryptionInput interface {
	pulumi.Input

	ToGetTableServerSideEncryptionOutput() GetTableServerSideEncryptionOutput
	ToGetTableServerSideEncryptionOutputWithContext(context.Context) GetTableServerSideEncryptionOutput
}

type GetTableServerSideEncryptionOutput struct{ *pulumi.OutputState }

type GetTableServerSideEncryptionPtrInput interface {
	pulumi.Input

	ToGetTableServerSideEncryptionPtrOutput() GetTableServerSideEncryptionPtrOutput
	ToGetTableServerSideEncryptionPtrOutputWithContext(context.Context) GetTableServerSideEncryptionPtrOutput
}

type GetTableServerSideEncryptionPtrOutput struct{ *pulumi.OutputState }

type GetTableTtl struct {
	AttributeName string `pulumi:"attributeName"`
	Enabled       bool   `pulumi:"enabled"`
}

type GetTableTtlArgs struct {
	AttributeName pulumi.StringInput `pulumi:"attributeName"`
	Enabled       pulumi.BoolInput   `pulumi:"enabled"`
}

type GetTableTtlInput interface {
	pulumi.Input

	ToGetTableTtlOutput() GetTableTtlOutput
	ToGetTableTtlOutputWithContext(context.Context) GetTableTtlOutput
}

type GetTableTtlOutput struct{ *pulumi.OutputState }

type GlobalTable struct {
	pulumi.CustomResourceState

	// The ARN of the DynamoDB Global Table
	Arn pulumi.StringOutput `pulumi:"arn"`
	// The name of the global table. Must match underlying DynamoDB Table names in all regions.
	Name pulumi.StringOutput `pulumi:"name"`
	// Underlying DynamoDB Table. At least 1 replica must be defined. See below.
	Replicas GlobalTableReplicaArrayOutput `pulumi:"replicas"`
}

type GlobalTableArgs struct {
	// The name of the global table. Must match underlying DynamoDB Table names in all regions.
	Name pulumi.StringPtrInput
	// Underlying DynamoDB Table. At least 1 replica must be defined. See below.
	Replicas GlobalTableReplicaArrayInput
}

type GlobalTableArray []GlobalTableInput

type GlobalTableArrayInput interface {
	pulumi.Input

	ToGlobalTableArrayOutput() GlobalTableArrayOutput
	ToGlobalTableArrayOutputWithContext(context.Context) GlobalTableArrayOutput
}

type GlobalTableArrayOutput struct{ *pulumi.OutputState }

type GlobalTableInput interface {
	pulumi.Input

	ToGlobalTableOutput() GlobalTableOutput
	ToGlobalTableOutputWithContext(ctx context.Context) GlobalTableOutput
}

type GlobalTableMap map[string]GlobalTableInput

type GlobalTableMapInput interface {
	pulumi.Input

	ToGlobalTableMapOutput() GlobalTableMapOutput
	ToGlobalTableMapOutputWithContext(context.Context) GlobalTableMapOutput
}

type GlobalTableMapOutput struct{ *pulumi.OutputState }

type GlobalTableOutput struct{ *pulumi.OutputState }

type GlobalTableReplica struct {
	// AWS region name of replica DynamoDB TableE.g., `us-east-1`
	RegionName string `pulumi:"regionName"`
}

type GlobalTableReplicaArgs struct {
	// AWS region name of replica DynamoDB TableE.g., `us-east-1`
	RegionName pulumi.StringInput `pulumi:"regionName"`
}

type GlobalTableReplicaArray []GlobalTableReplicaInput

type GlobalTableReplicaArrayInput interface {
	pulumi.Input

	ToGlobalTableReplicaArrayOutput() GlobalTableReplicaArrayOutput
	ToGlobalTableReplicaArrayOutputWithContext(context.Context) GlobalTableReplicaArrayOutput
}

type GlobalTableReplicaArrayOutput struct{ *pulumi.OutputState }

type GlobalTableReplicaInput interface {
	pulumi.Input

	ToGlobalTableReplicaOutput() GlobalTableReplicaOutput
	ToGlobalTableReplicaOutputWithContext(context.Context) GlobalTableReplicaOutput
}

type GlobalTableReplicaOutput struct{ *pulumi.OutputState }

type GlobalTableState struct {
	// The ARN of the DynamoDB Global Table
	Arn pulumi.StringPtrInput
	// The name of the global table. Must match underlying DynamoDB Table names in all regions.
	Name pulumi.StringPtrInput
	// Underlying DynamoDB Table. At least 1 replica must be defined. See below.
	Replicas GlobalTableReplicaArrayInput
}

type KinesisStreamingDestination struct {
	pulumi.CustomResourceState

	// The ARN for a Kinesis data stream. This must exist in the same account and region as the DynamoDB table.
	StreamArn pulumi.StringOutput `pulumi:"streamArn"`
	// The name of the DynamoDB table. There
	// can only be one Kinesis streaming destination for a given DynamoDB table.
	TableName pulumi.StringOutput `pulumi:"tableName"`
}

type KinesisStreamingDestinationArgs struct {
	// The ARN for a Kinesis data stream. This must exist in the same account and region as the DynamoDB table.
	StreamArn pulumi.StringInput
	// The name of the DynamoDB table. There
	// can only be one Kinesis streaming destination for a given DynamoDB table.
	TableName pulumi.StringInput
}

type KinesisStreamingDestinationArray []KinesisStreamingDestinationInput

type KinesisStreamingDestinationArrayInput interface {
	pulumi.Input

	ToKinesisStreamingDestinationArrayOutput() KinesisStreamingDestinationArrayOutput
	ToKinesisStreamingDestinationArrayOutputWithContext(context.Context) KinesisStreamingDestinationArrayOutput
}

type KinesisStreamingDestinationArrayOutput struct{ *pulumi.OutputState }

type KinesisStreamingDestinationInput interface {
	pulumi.Input

	ToKinesisStreamingDestinationOutput() KinesisStreamingDestinationOutput
	ToKinesisStreamingDestinationOutputWithContext(ctx context.Context) KinesisStreamingDestinationOutput
}

type KinesisStreamingDestinationMap map[string]KinesisStreamingDestinationInput

type KinesisStreamingDestinationMapInput interface {
	pulumi.Input

	ToKinesisStreamingDestinationMapOutput() KinesisStreamingDestinationMapOutput
	ToKinesisStreamingDestinationMapOutputWithContext(context.Context) KinesisStreamingDestinationMapOutput
}

type KinesisStreamingDestinationMapOutput struct{ *pulumi.OutputState }

type KinesisStreamingDestinationOutput struct{ *pulumi.OutputState }

type KinesisStreamingDestinationState struct {
	// The ARN for a Kinesis data stream. This must exist in the same account and region as the DynamoDB table.
	StreamArn pulumi.StringPtrInput
	// The name of the DynamoDB table. There
	// can only be one Kinesis streaming destination for a given DynamoDB table.
	TableName pulumi.StringPtrInput
}

type LookupTableArgs struct {
	// Name of the DynamoDB table.
	Name                 string                        `pulumi:"name"`
	ServerSideEncryption *GetTableServerSideEncryption `pulumi:"serverSideEncryption"`
	Tags                 map[string]string             `pulumi:"tags"`
}

type LookupTableItemArgs struct {
	ExpressionAttributeNames map[string]string `pulumi:"expressionAttributeNames"`
	// A map of attribute names to AttributeValue objects, representing the primary key of the item to retrieve.
	// For the primary key, you must provide all of the attributes. For example, with a simple primary key, you only need to provide a value for the partition key. For a composite primary key, you must provide values for both the partition key and the sort key.
	//
	// The following arguments are optional:
	Key string `pulumi:"key"`
	// A string that identifies one or more attributes to retrieve from the table. These attributes can include scalars, sets, or elements of a JSON document. The attributes in the expression must be separated by commas.
	// If no attribute names are specified, then all attributes are returned. If any of the requested attributes are not found, they do not appear in the result.
	ProjectionExpression *string `pulumi:"projectionExpression"`
	// The name of the table containing the requested item.
	TableName string `pulumi:"tableName"`
}

type LookupTableItemOutputArgs struct {
	ExpressionAttributeNames pulumi.StringMapInput `pulumi:"expressionAttributeNames"`
	// A map of attribute names to AttributeValue objects, representing the primary key of the item to retrieve.
	// For the primary key, you must provide all of the attributes. For example, with a simple primary key, you only need to provide a value for the partition key. For a composite primary key, you must provide values for both the partition key and the sort key.
	//
	// The following arguments are optional:
	Key pulumi.StringInput `pulumi:"key"`
	// A string that identifies one or more attributes to retrieve from the table. These attributes can include scalars, sets, or elements of a JSON document. The attributes in the expression must be separated by commas.
	// If no attribute names are specified, then all attributes are returned. If any of the requested attributes are not found, they do not appear in the result.
	ProjectionExpression pulumi.StringPtrInput `pulumi:"projectionExpression"`
	// The name of the table containing the requested item.
	TableName pulumi.StringInput `pulumi:"tableName"`
}

type LookupTableItemResult struct {
	ExpressionAttributeNames map[string]string `pulumi:"expressionAttributeNames"`
	// The provider-assigned unique ID for this managed resource.
	Id string `pulumi:"id"`
	// JSON representation of a map of attribute names to [AttributeValue](https://docs.aws.amazon.com/amazondynamodb/latest/APIReference/API_AttributeValue.html) objects, as specified by ProjectionExpression.
	Item                 string  `pulumi:"item"`
	Key                  string  `pulumi:"key"`
	ProjectionExpression *string `pulumi:"projectionExpression"`
	TableName            string  `pulumi:"tableName"`
}

type LookupTableItemResultOutput struct{ *pulumi.OutputState }

type LookupTableOutputArgs struct {
	// Name of the DynamoDB table.
	Name                 pulumi.StringInput                   `pulumi:"name"`
	ServerSideEncryption GetTableServerSideEncryptionPtrInput `pulumi:"serverSideEncryption"`
	Tags                 pulumi.StringMapInput                `pulumi:"tags"`
}

type LookupTableResult struct {
	Arn                       string                         `pulumi:"arn"`
	Attributes                []GetTableAttribute            `pulumi:"attributes"`
	BillingMode               string                         `pulumi:"billingMode"`
	DeletionProtectionEnabled bool                           `pulumi:"deletionProtectionEnabled"`
	GlobalSecondaryIndexes    []GetTableGlobalSecondaryIndex `pulumi:"globalSecondaryIndexes"`
	HashKey                   string                         `pulumi:"hashKey"`
	// The provider-assigned unique ID for this managed resource.
	Id                    string                        `pulumi:"id"`
	LocalSecondaryIndexes []GetTableLocalSecondaryIndex `pulumi:"localSecondaryIndexes"`
	Name                  string                        `pulumi:"name"`
	PointInTimeRecovery   GetTablePointInTimeRecovery   `pulumi:"pointInTimeRecovery"`
	RangeKey              string                        `pulumi:"rangeKey"`
	ReadCapacity          int                           `pulumi:"readCapacity"`
	Replicas              []GetTableReplicaType         `pulumi:"replicas"`
	ServerSideEncryption  GetTableServerSideEncryption  `pulumi:"serverSideEncryption"`
	StreamArn             string                        `pulumi:"streamArn"`
	StreamEnabled         bool                          `pulumi:"streamEnabled"`
	StreamLabel           string                        `pulumi:"streamLabel"`
	StreamViewType        string                        `pulumi:"streamViewType"`
	TableClass            string                        `pulumi:"tableClass"`
	Tags                  map[string]string             `pulumi:"tags"`
	Ttl                   GetTableTtl                   `pulumi:"ttl"`
	WriteCapacity         int                           `pulumi:"writeCapacity"`
}

type LookupTableResultOutput struct{ *pulumi.OutputState }

type ResourcePolicy struct {
	pulumi.CustomResourceState

	// Set this parameter to true to confirm that you want to remove your permissions to change the policy of this resource in the future.
	ConfirmRemoveSelfResourceAccess pulumi.BoolOutput `pulumi:"confirmRemoveSelfResourceAccess"`
	// n Amazon Web Services resource-based policy document in JSON format. The maximum size supported for a resource-based policy document is 20 KB. DynamoDB counts whitespaces when calculating the size of a policy against this limit. For a full list of all considerations that you should keep in mind while attaching a resource-based policy, see Resource-based policy considerations.
	//
	// The following arguments are optional:
	Policy pulumi.StringOutput `pulumi:"policy"`
	// The Amazon Resource Name (ARN) of the DynamoDB resource to which the policy will be attached. The resources you can specify include tables and streams. You can control index permissions using the base table's policy. To specify the same permission level for your table and its indexes, you can provide both the table and index Amazon Resource Name (ARN)s in the Resource field of a given Statement in your policy document. Alternatively, to specify different permissions for your table, indexes, or both, you can define multiple Statement fields in your policy document.
	ResourceArn pulumi.StringOutput `pulumi:"resourceArn"`
	// A unique string that represents the revision ID of the policy. If you are comparing revision IDs, make sure to always use string comparison logic.
	RevisionId pulumi.StringOutput `pulumi:"revisionId"`
}

type ResourcePolicyArgs struct {
	// Set this parameter to true to confirm that you want to remove your permissions to change the policy of this resource in the future.
	ConfirmRemoveSelfResourceAccess pulumi.BoolPtrInput
	// n Amazon Web Services resource-based policy document in JSON format. The maximum size supported for a resource-based policy document is 20 KB. DynamoDB counts whitespaces when calculating the size of a policy against this limit. For a full list of all considerations that you should keep in mind while attaching a resource-based policy, see Resource-based policy considerations.
	//
	// The following arguments are optional:
	Policy pulumi.StringInput
	// The Amazon Resource Name (ARN) of the DynamoDB resource to which the policy will be attached. The resources you can specify include tables and streams. You can control index permissions using the base table's policy. To specify the same permission level for your table and its indexes, you can provide both the table and index Amazon Resource Name (ARN)s in the Resource field of a given Statement in your policy document. Alternatively, to specify different permissions for your table, indexes, or both, you can define multiple Statement fields in your policy document.
	ResourceArn pulumi.StringInput
}

type ResourcePolicyArray []ResourcePolicyInput

type ResourcePolicyArrayInput interface {
	pulumi.Input

	ToResourcePolicyArrayOutput() ResourcePolicyArrayOutput
	ToResourcePolicyArrayOutputWithContext(context.Context) ResourcePolicyArrayOutput
}

type ResourcePolicyArrayOutput struct{ *pulumi.OutputState }

type ResourcePolicyInput interface {
	pulumi.Input

	ToResourcePolicyOutput() ResourcePolicyOutput
	ToResourcePolicyOutputWithContext(ctx context.Context) ResourcePolicyOutput
}

type ResourcePolicyMap map[string]ResourcePolicyInput

type ResourcePolicyMapInput interface {
	pulumi.Input

	ToResourcePolicyMapOutput() ResourcePolicyMapOutput
	ToResourcePolicyMapOutputWithContext(context.Context) ResourcePolicyMapOutput
}

type ResourcePolicyMapOutput struct{ *pulumi.OutputState }

type ResourcePolicyOutput struct{ *pulumi.OutputState }

type ResourcePolicyState struct {
	// Set this parameter to true to confirm that you want to remove your permissions to change the policy of this resource in the future.
	ConfirmRemoveSelfResourceAccess pulumi.BoolPtrInput
	// n Amazon Web Services resource-based policy document in JSON format. The maximum size supported for a resource-based policy document is 20 KB. DynamoDB counts whitespaces when calculating the size of a policy against this limit. For a full list of all considerations that you should keep in mind while attaching a resource-based policy, see Resource-based policy considerations.
	//
	// The following arguments are optional:
	Policy pulumi.StringPtrInput
	// The Amazon Resource Name (ARN) of the DynamoDB resource to which the policy will be attached. The resources you can specify include tables and streams. You can control index permissions using the base table's policy. To specify the same permission level for your table and its indexes, you can provide both the table and index Amazon Resource Name (ARN)s in the Resource field of a given Statement in your policy document. Alternatively, to specify different permissions for your table, indexes, or both, you can define multiple Statement fields in your policy document.
	ResourceArn pulumi.StringPtrInput
	// A unique string that represents the revision ID of the policy. If you are comparing revision IDs, make sure to always use string comparison logic.
	RevisionId pulumi.StringPtrInput
}

type Table struct {
	pulumi.CustomResourceState

	// ARN of the table
	Arn pulumi.StringOutput `pulumi:"arn"`
	// Set of nested attribute definitions. Only required for `hashKey` and `rangeKey` attributes. See below.
	Attributes TableAttributeArrayOutput `pulumi:"attributes"`
	// Controls how you are charged for read and write throughput and how you manage capacity. The valid values are `PROVISIONED` and `PAY_PER_REQUEST`. Defaults to `PROVISIONED`.
	BillingMode pulumi.StringPtrOutput `pulumi:"billingMode"`
	// Enables deletion protection for table. Defaults to `false`.
	DeletionProtectionEnabled pulumi.BoolPtrOutput `pulumi:"deletionProtectionEnabled"`
	// Describe a GSI for the table; subject to the normal limits on the number of GSIs, projected attributes, etc. See below.
	GlobalSecondaryIndexes TableGlobalSecondaryIndexArrayOutput `pulumi:"globalSecondaryIndexes"`
	// Attribute to use as the hash (partition) key. Must also be defined as an `attribute`. See below.
	HashKey pulumi.StringOutput `pulumi:"hashKey"`
	// Import Amazon S3 data into a new table. See below.
	ImportTable TableImportTablePtrOutput `pulumi:"importTable"`
	// Describe an LSI on the table; these can only be allocated _at creation_ so you cannot change this definition after you have created the resource. See below.
	LocalSecondaryIndexes TableLocalSecondaryIndexArrayOutput `pulumi:"localSecondaryIndexes"`
	// Unique within a region name of the table.
	//
	// Optional arguments:
	Name pulumi.StringOutput `pulumi:"name"`
	// Enable point-in-time recovery options. See below.
	PointInTimeRecovery TablePointInTimeRecoveryOutput `pulumi:"pointInTimeRecovery"`
	// Attribute to use as the range (sort) key. Must also be defined as an `attribute`, see below.
	RangeKey pulumi.StringPtrOutput `pulumi:"rangeKey"`
	// Number of read units for this table. If the `billingMode` is `PROVISIONED`, this field is required.
	ReadCapacity pulumi.IntOutput `pulumi:"readCapacity"`
	// Configuration block(s) with [DynamoDB Global Tables V2 (version 2019.11.21)](https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/globaltables.V2.html) replication configurations. See below.
	Replicas TableReplicaTypeArrayOutput `pulumi:"replicas"`
	// Time of the point-in-time recovery point to restore.
	RestoreDateTime pulumi.StringPtrOutput `pulumi:"restoreDateTime"`
	// Name of the table to restore. Must match the name of an existing table.
	RestoreSourceName pulumi.StringPtrOutput `pulumi:"restoreSourceName"`
	// If set, restores table to the most recent point-in-time recovery point.
	RestoreToLatestTime pulumi.BoolPtrOutput `pulumi:"restoreToLatestTime"`
	// Encryption at rest options. AWS DynamoDB tables are automatically encrypted at rest with an AWS-owned Customer Master Key if this argument isn't specified. See below.
	ServerSideEncryption TableServerSideEncryptionOutput `pulumi:"serverSideEncryption"`
	// ARN of the Table Stream. Only available when `streamEnabled = true`
	StreamArn pulumi.StringOutput `pulumi:"streamArn"`
	// Whether Streams are enabled.
	StreamEnabled pulumi.BoolPtrOutput `pulumi:"streamEnabled"`
	// Timestamp, in ISO 8601 format, for this stream. Note that this timestamp is not a unique identifier for the stream on its own. However, the combination of AWS customer ID, table name and this field is guaranteed to be unique. It can be used for creating CloudWatch Alarms. Only available when `streamEnabled = true`.
	StreamLabel pulumi.StringOutput `pulumi:"streamLabel"`
	// When an item in the table is modified, StreamViewType determines what information is written to the table's stream. Valid values are `KEYS_ONLY`, `NEW_IMAGE`, `OLD_IMAGE`, `NEW_AND_OLD_IMAGES`.
	StreamViewType pulumi.StringOutput `pulumi:"streamViewType"`
	// Storage class of the table.
	// Valid values are `STANDARD` and `STANDARD_INFREQUENT_ACCESS`.
	// Default value is `STANDARD`.
	TableClass pulumi.StringPtrOutput `pulumi:"tableClass"`
	// A map of tags to populate on the created table. If configured with a provider `defaultTags` configuration block present, tags with matching keys will overwrite those defined at the provider-level.
	Tags pulumi.StringMapOutput `pulumi:"tags"`
	// Map of tags assigned to the resource, including those inherited from the provider `defaultTags` configuration block.
	//
	// Deprecated: Please use `tags` instead.
	TagsAll pulumi.StringMapOutput `pulumi:"tagsAll"`
	// Configuration block for TTL. See below.
	Ttl TableTtlOutput `pulumi:"ttl"`
	// Number of write units for this table. If the `billingMode` is `PROVISIONED`, this field is required.
	WriteCapacity pulumi.IntOutput `pulumi:"writeCapacity"`
}

type TableArgs struct {
	// Set of nested attribute definitions. Only required for `hashKey` and `rangeKey` attributes. See below.
	Attributes TableAttributeArrayInput
	// Controls how you are charged for read and write throughput and how you manage capacity. The valid values are `PROVISIONED` and `PAY_PER_REQUEST`. Defaults to `PROVISIONED`.
	BillingMode pulumi.StringPtrInput
	// Enables deletion protection for table. Defaults to `false`.
	DeletionProtectionEnabled pulumi.BoolPtrInput
	// Describe a GSI for the table; subject to the normal limits on the number of GSIs, projected attributes, etc. See below.
	GlobalSecondaryIndexes TableGlobalSecondaryIndexArrayInput
	// Attribute to use as the hash (partition) key. Must also be defined as an `attribute`. See below.
	HashKey pulumi.StringPtrInput
	// Import Amazon S3 data into a new table. See below.
	ImportTable TableImportTablePtrInput
	// Describe an LSI on the table; these can only be allocated _at creation_ so you cannot change this definition after you have created the resource. See below.
	LocalSecondaryIndexes TableLocalSecondaryIndexArrayInput
	// Unique within a region name of the table.
	//
	// Optional arguments:
	Name pulumi.StringPtrInput
	// Enable point-in-time recovery options. See below.
	PointInTimeRecovery TablePointInTimeRecoveryPtrInput
	// Attribute to use as the range (sort) key. Must also be defined as an `attribute`, see below.
	RangeKey pulumi.StringPtrInput
	// Number of read units for this table. If the `billingMode` is `PROVISIONED`, this field is required.
	ReadCapacity pulumi.IntPtrInput
	// Configuration block(s) with [DynamoDB Global Tables V2 (version 2019.11.21)](https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/globaltables.V2.html) replication configurations. See below.
	Replicas TableReplicaTypeArrayInput
	// Time of the point-in-time recovery point to restore.
	RestoreDateTime pulumi.StringPtrInput
	// Name of the table to restore. Must match the name of an existing table.
	RestoreSourceName pulumi.StringPtrInput
	// If set, restores table to the most recent point-in-time recovery point.
	RestoreToLatestTime pulumi.BoolPtrInput
	// Encryption at rest options. AWS DynamoDB tables are automatically encrypted at rest with an AWS-owned Customer Master Key if this argument isn't specified. See below.
	ServerSideEncryption TableServerSideEncryptionPtrInput
	// Whether Streams are enabled.
	StreamEnabled pulumi.BoolPtrInput
	// When an item in the table is modified, StreamViewType determines what information is written to the table's stream. Valid values are `KEYS_ONLY`, `NEW_IMAGE`, `OLD_IMAGE`, `NEW_AND_OLD_IMAGES`.
	StreamViewType pulumi.StringPtrInput
	// Storage class of the table.
	// Valid values are `STANDARD` and `STANDARD_INFREQUENT_ACCESS`.
	// Default value is `STANDARD`.
	TableClass pulumi.StringPtrInput
	// A map of tags to populate on the created table. If configured with a provider `defaultTags` configuration block present, tags with matching keys will overwrite those defined at the provider-level.
	Tags pulumi.StringMapInput
	// Configuration block for TTL. See below.
	Ttl TableTtlPtrInput
	// Number of write units for this table. If the `billingMode` is `PROVISIONED`, this field is required.
	WriteCapacity pulumi.IntPtrInput
}

type TableArray []TableInput

type TableArrayInput interface {
	pulumi.Input

	ToTableArrayOutput() TableArrayOutput
	ToTableArrayOutputWithContext(context.Context) TableArrayOutput
}

type TableArrayOutput struct{ *pulumi.OutputState }

type TableAttribute struct {
	// Name of the attribute
	Name string `pulumi:"name"`
	// Attribute type. Valid values are `S` (string), `N` (number), `B` (binary).
	Type string `pulumi:"type"`
}

type TableAttributeArgs struct {
	// Name of the attribute
	Name pulumi.StringInput `pulumi:"name"`
	// Attribute type. Valid values are `S` (string), `N` (number), `B` (binary).
	Type pulumi.StringInput `pulumi:"type"`
}

type TableAttributeArray []TableAttributeInput

type TableAttributeArrayInput interface {
	pulumi.Input

	ToTableAttributeArrayOutput() TableAttributeArrayOutput
	ToTableAttributeArrayOutputWithContext(context.Context) TableAttributeArrayOutput
}

type TableAttributeArrayOutput struct{ *pulumi.OutputState }

type TableAttributeInput interface {
	pulumi.Input

	ToTableAttributeOutput() TableAttributeOutput
	ToTableAttributeOutputWithContext(context.Context) TableAttributeOutput
}

type TableAttributeOutput struct{ *pulumi.OutputState }

type TableExport struct {
	pulumi.CustomResourceState

	// ARN of the Table Export.
	Arn pulumi.StringOutput `pulumi:"arn"`
	// Billable size of the table export.
	BilledSizeInBytes pulumi.IntOutput `pulumi:"billedSizeInBytes"`
	// Time at which the export task completed.
	EndTime pulumi.StringOutput `pulumi:"endTime"`
	// Format for the exported data. Valid values are `DYNAMODB_JSON` or `ION`. See the [AWS Documentation](https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/S3DataExport.Output.html#S3DataExport.Output_Data) for more information on these export formats. Default is `DYNAMODB_JSON`.
	ExportFormat pulumi.StringPtrOutput `pulumi:"exportFormat"`
	// Status of the export - export can be in one of the following states `IN_PROGRESS`, `COMPLETED`, or `FAILED`.
	ExportStatus pulumi.StringOutput `pulumi:"exportStatus"`
	// Time in RFC3339 format from which to export table data. The table export will be a snapshot of the table's state at this point in time. Omitting this value will result in a snapshot from the current time.
	ExportTime pulumi.StringOutput `pulumi:"exportTime"`
	// Number of items exported.
	ItemCount pulumi.IntOutput `pulumi:"itemCount"`
	// Name of the manifest file for the export task. See the [AWS Documentation](https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/S3DataExport.Output.html#S3DataExport.Output_Manifest) for more information on this manifest file.
	ManifestFilesS3Key pulumi.StringOutput `pulumi:"manifestFilesS3Key"`
	// Name of the Amazon S3 bucket to export the snapshot to. See the [AWS Documentation](https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/S3DataExport_Requesting.html#S3DataExport_Requesting_Permissions) for information on how configure this S3 bucket.
	S3Bucket pulumi.StringOutput `pulumi:"s3Bucket"`
	// ID of the AWS account that owns the bucket the export will be stored in.
	S3BucketOwner pulumi.StringOutput `pulumi:"s3BucketOwner"`
	// Amazon S3 bucket prefix to use as the file name and path of the exported snapshot.
	S3Prefix pulumi.StringOutput `pulumi:"s3Prefix"`
	// Type of encryption used on the bucket where export data will be stored. Valid values are: `AES256`, `KMS`.
	S3SseAlgorithm pulumi.StringOutput `pulumi:"s3SseAlgorithm"`
	// ID of the AWS KMS managed key used to encrypt the S3 bucket where export data will be stored (if applicable).
	S3SseKmsKeyId pulumi.StringPtrOutput `pulumi:"s3SseKmsKeyId"`
	// Time at which the export task began.
	StartTime pulumi.StringOutput `pulumi:"startTime"`
	// ARN associated with the table to export.
	//
	// The following arguments are optional:
	TableArn pulumi.StringOutput `pulumi:"tableArn"`
}

type TableExportArgs struct {
	// Format for the exported data. Valid values are `DYNAMODB_JSON` or `ION`. See the [AWS Documentation](https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/S3DataExport.Output.html#S3DataExport.Output_Data) for more information on these export formats. Default is `DYNAMODB_JSON`.
	ExportFormat pulumi.StringPtrInput
	// Time in RFC3339 format from which to export table data. The table export will be a snapshot of the table's state at this point in time. Omitting this value will result in a snapshot from the current time.
	ExportTime pulumi.StringPtrInput
	// Name of the Amazon S3 bucket to export the snapshot to. See the [AWS Documentation](https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/S3DataExport_Requesting.html#S3DataExport_Requesting_Permissions) for information on how configure this S3 bucket.
	S3Bucket pulumi.StringInput
	// ID of the AWS account that owns the bucket the export will be stored in.
	S3BucketOwner pulumi.StringPtrInput
	// Amazon S3 bucket prefix to use as the file name and path of the exported snapshot.
	S3Prefix pulumi.StringPtrInput
	// Type of encryption used on the bucket where export data will be stored. Valid values are: `AES256`, `KMS`.
	S3SseAlgorithm pulumi.StringPtrInput
	// ID of the AWS KMS managed key used to encrypt the S3 bucket where export data will be stored (if applicable).
	S3SseKmsKeyId pulumi.StringPtrInput
	// ARN associated with the table to export.
	//
	// The following arguments are optional:
	TableArn pulumi.StringInput
}

type TableExportArray []TableExportInput

type TableExportArrayInput interface {
	pulumi.Input

	ToTableExportArrayOutput() TableExportArrayOutput
	ToTableExportArrayOutputWithContext(context.Context) TableExportArrayOutput
}

type TableExportArrayOutput struct{ *pulumi.OutputState }

type TableExportInput interface {
	pulumi.Input

	ToTableExportOutput() TableExportOutput
	ToTableExportOutputWithContext(ctx context.Context) TableExportOutput
}

type TableExportMap map[string]TableExportInput

type TableExportMapInput interface {
	pulumi.Input

	ToTableExportMapOutput() TableExportMapOutput
	ToTableExportMapOutputWithContext(context.Context) TableExportMapOutput
}

type TableExportMapOutput struct{ *pulumi.OutputState }