go-nats-server

command module
v1.4.1 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Feb 7, 2019 License: Apache-2.0 Imports: 4 Imported by: 0

README

License FOSSA Status ReportCard Build Release Coverage CII Best Practices

A High Performance NATS Server written in Go and hosted by the Cloud Native Computing Foundation (CNCF).

Quickstart

If you just want to start using NATS, and you have installed Go 1.9+ and set your $GOPATH:

Install and run the NATS server:

go get github.com/nats-io/gnatsd
gnatsd

Install the Go NATS client:

go get github.com/nats-io/go-nats

Installation

You can install the NATS server binary or Docker image, connect to a NATS service, or build the server from source.

Download

The recommended way to install the NATS server is to download one of the pre-built release binaries which are available for OSX, Linux (x86-64/ARM), Windows, and Docker. Instructions for using these binaries are on the GitHub releases page.

Demo

You can connect to a public NATS server that is running at our demo site: nats://demo.nats.io:4222, and a secure version at tls://demo.nats.io:4443. See the protocol section for usage.

Build

You can build the latest version of the server from the master branch. The master branch generally should build and pass tests, but may not work correctly in your environment. Note that stable branches of operating system packagers provided by your OS vendor may not be sufficient.

You need Go version 1.9+ installed to build the NATS server. We support vendored dependencies.

  • Run go version to verify that you are running Go 1.9+. (Run go help for more guidance.)
  • Clone the https://github.com/nats-io/gnatsd repository.
  • Run go build inside the /nats-io/gnatsd directory. A successful build produces no messages and creates the server executable gnatsd in the directory.
  • Run go test ./... to run the unit regression tests.

Running

To start the NATS server with default settings (and no authentication or clustering), you can invoke the gnatsd binary with no command line options or configuration file.

> ./gnatsd
[85391] 2019/02/07 16:19:35.526362 [INF] Starting nats-server version 1.4.1
[85391] 2019/02/07 16:19:35.526422 [INF] Git commit [not set]
[85391] 2019/02/07 16:19:35.526591 [INF] Listening for client connections on 0.0.0.0:4222
[85391] 2019/02/07 16:19:35.526597 [INF] Server is ready

The server is started and listening for client connections on port 4222 (the default) from all available interfaces. The logs are displayed to stdout as shown above in the server output.

Clients

The NATS ecosystem provides a large range of supported and community clients, including Go, Java, Node, and many more. For the complete up-to-date list, visit the NATS download site.

Protocol

The NATS server uses a text based protocol, so interacting with it can be as simple as using telnet as shown below. See also the protocol demo.

> telnet demo.nats.io 4222
Trying 107.170.221.32...
Connected to demo.nats.io.
Escape character is '^]'.
INFO {"server_id":"5o1EFgWr0QYA1giGmaoRLy","version":"1.2.0","proto":1,"go":"go1.10.3","host":"0.0.0.0","port":4222,"max_payload":1048576,"client_id":25474}
SUB foo 1
+OK
PUB foo 11
Hello World
+OK
MSG foo 1 11
Hello World

Process Signaling

On Unix systems, the NATS server responds to the following signals:

Signal Result
SIGKILL Kills the process immediately
SIGINT Stops the server gracefully
SIGUSR1 Reopens the log file for log rotation
SIGHUP Reloads server configuration file

The gnatsd binary can be used to send these signals to running NATS servers using the -sl flag:

# Reload server configuration
gnatsd -sl reload

# Reopen log file for log rotation
gnatsd -sl reopen

# Stop the server
gnatsd -sl stop

If there are multiple gnatsd processes running, or if pgrep isn't available, you must either specify a PID or the absolute path to a PID file:

gnatsd -sl stop=<pid>
gnatsd -sl stop=/path/to/pidfile

See the Windows Service section for information on signaling the NATS server on Windows.

Windows Service

The NATS server supports running as a Windows service. In fact, this is the recommended way of running NATS on Windows. There is currently no installer and instead users should use sc.exe to install the service:

sc.exe create gnatsd binPath= "%NATS_PATH%\gnatsd.exe [gnatsd flags]"
sc.exe start gnatsd

The above will create and start a gnatsd service. Note that the gnatsd flags should be passed in when creating the service. This allows for running multiple NATS server configurations on a single Windows server by using a 1:1 service instance per installed NATS server service. Once the service is running, it can be controlled using sc.exe or gnatsd.exe -sl:

REM Reload server configuration
gnatsd.exe -sl reload

REM Reopen log file for log rotation
gnatsd.exe -sl reopen

REM Stop the server
gnatsd.exe -sl stop

The above commands will default to controlling the gnatsd service. If the service is another name, it can be specified:

gnatsd.exe -sl stop=<service name>

Command line arguments

The NATS server accepts command line arguments to control its behavior. Usage is shown below. Note that command line arguments override those items in the configuration file.

Server Options:
    -a, --addr <host>                Bind to host address (default: 0.0.0.0)
    -p, --port <port>                Use port for clients (default: 4222)
    -P, --pid <file>                 File to store PID
    -m, --http_port <port>           Use port for http monitoring
    -ms,--https_port <port>          Use port for https monitoring
    -c, --config <file>              Configuration file
    -sl,--signal <signal>[=<pid>]    Send signal to gnatsd process (stop, quit, reopen, reload)
                                     <pid> can be either a PID (e.g. 1) or the path to a PID file (e.g. /var/run/gnatsd.pid)
        --client_advertise <string>  Client URL to advertise to other servers

Logging Options:
    -l, --log <file>                 File to redirect log output
    -T, --logtime                    Timestamp log entries (default: true)
    -s, --syslog                     Log to syslog or windows event log
    -r, --remote_syslog <addr>       Syslog server addr (udp://localhost:514)
    -D, --debug                      Enable debugging output
    -V, --trace                      Trace the raw protocol
    -DV                              Debug and trace

Authorization Options:
        --user <user>                User required for connections
        --pass <password>            Password required for connections
        --auth <token>               Authorization token required for connections

TLS Options:
        --tls                        Enable TLS, do not verify clients (default: false)
        --tlscert <file>             Server certificate file
        --tlskey <file>              Private key for server certificate
        --tlsverify                  Enable TLS, verify client certificates
        --tlscacert <file>           Client certificate CA for verification

Cluster Options:
        --routes <rurl-1, rurl-2>    Routes to solicit and connect
        --cluster <cluster-url>      Cluster URL for solicited routes
        --no_advertise <bool>        Advertise known cluster IPs to clients
        --cluster_advertise <string> Cluster URL to advertise to other servers
        --connect_retries <number>   For implicit routes, number of connect retries


Common Options:
    -h, --help                       Show this message
    -v, --version                    Show version
        --help_tls                   TLS help

Configuration file

Typically you configure the NATS server using a configuration file, an example of which is shown below. See also the server configuration file documentation for details on the configuration language.

listen: localhost:4242 # host/port to listen for client connections

http: localhost:8222 # HTTP monitoring port

# Authorization for client connections
authorization {
  user:     derek
  # ./util/mkpasswd -p T0pS3cr3t
  password: $2a$11$W2zko751KUvVy59mUTWmpOdWjpEm5qhcCZRd05GjI/sSOT.xtiHyG
  timeout:  1
}

# Cluster definition

cluster {

  listen: localhost:4244 # host/port for inbound route connections

  # Authorization for route connections
  authorization {
    user: route_user
    # ./util/mkpasswd -p T0pS3cr3tT00!
    password: $2a$11$xH8dkGrty1cBNtZjhPeWJewu/YPbSU.rXJWmS6SFilOBXzmZoMk9m
    timeout: 0.5
  }

  # Routes are actively solicited and connected to from this server.
  # Other servers can connect to us if they supply the correct credentials
  # in their routes definitions from above.

  routes = [
    nats-route://user1:pass1@127.0.0.1:4245
    nats-route://user2:pass2@127.0.0.1:4246
  ]
}

# logging options
debug:   false
trace:   true
logtime: false
log_file: "/tmp/nats-server.log"

# pid file
pid_file: "/tmp/nats-server.pid"

# Some system overides

# max_connections
max_connections: 100

# max_subscriptions (per connection)
max_subscriptions: 1000

# maximum protocol control line
max_control_line: 512

# maximum payload
max_payload: 65536

# Duration the server can block on a socket write to a client.  Exceeding the
# deadline will designate a client as a slow consumer.
write_deadline: "2s"

Inside configuration files, string values support the following escape characters: \xXX, \t, \n, \r, \", \\. Take note that when specifying directory paths in options such as pid_file and log_file on Windows, you'll need to escape backslashes, e.g. log_file: "c:\\logging\\log.txt", or use unix style (/) path separators.

Variables

The NATS sever configuration language supports block-scoped variables that can be used for templating in the configuration file, and specifically to ease setting of group values for permission fields and user authentication.

Variables can be referenced by the prefix $, for example: $PASSWORD. Variables can be defined in the configuration file itself or reference environment variables.

Any value in the configuration language can be a variable reference (key=$VALUE). Note that the variable identifier (name) is not case sensitive, but is capitalized by convention for readability.

Clustering

Clustering lets you scale NATS messaging by having multiple NATS servers communicate with each other. Clustering lets messages published to one server be routed and received by a subscriber on another server. See also the clustered NATS documentation.

Full mesh required

In order for clustering to work correctly, all NATS servers must be connected to each other.

NATS servers have a forwarding limit of one hop. This means that each server will only forward a message that it has received from a client to all connected servers that expressed interest in the message's published subject. A message received from a route will only be distributed to local clients.

Configuration options

NATS supports running each server in clustered mode. The following command line options are supported:

--cluster [cluster url]     Cluster URL for solicited routes
--routes [rurl-1, rurl-2]   Routes to solicit and connect

The --cluster flag specifies the NATS URL where the server listens for connections from other servers.

The --routes flag specifies the NATS URL for one or more servers in the cluster. When a server connects to a specified route, it will advertise its own cluster URL to other servers. Note that when the --routes option is specified a --cluster option is also required.

Previous releases required you to build the complete mesh using the --routes flag. To define your cluster in the current release, please follow the "Basic example" as described below.

Suppose that server srvA is connected to server srvB. A bi-directional route exists between srvA and srvB. A new server, srvC, connects to srvA.
When accepting the connection, srvA will gossip the address of srvC to srvB so that srvB connects to srvC, completing the full mesh.
The URL that srvB will use to connect to srvC is the result of the TCP remote address that srvA got from its connection to srvC.

It is possible to advertise with --cluster_advertise a different address than the one used in --cluster.

In the previous example, if srvC uses a --cluster_adertise URL, this is what srvA will gossip to srvB in order to connect to srvC.

NOTE: The advertise address should really result in a connection to srvC. Providing an address that would result in a connection to a different NATS Server would prevent the formation of a full-mesh cluster!

As part of the gossip protocol, a server will also send to the other servers the URL clients should connect to.
The URL is the one defined in the listen parameter, or, if 0.0.0.0 or :: is specified, the resolved non-local IP addresses for the "any" interface.

If those addresses are not reacheable from the outside world where the clients are running, the administrator can use the --no_advertise option to disable servers gossiping those URLs.
Another option is to provide a --client_advertise URL to use instead. If this option is specified (and advertise has not been disabled), then the server will advertise this URL to other servers instead of its listen address (or resolved IPs when listen is 0.0.0.0 or ::).

Basic example

NATS makes building the full mesh easy. Simply designate a server to be a seed server. All other servers in the cluster simply specify the seed server as its server's routes option as indicated below.

When running NATS Servers in different hosts, the command line parameters for all servers could be as simple as:

gnatsd --cluster nats://$HOSTNAME:$NATS_CLUSTER_PORT --routes nats://$NATS_SEED_HOST:$NATS_CLUSTER_PORT

Even on the host where the seed is running, the above would work as the server would detect an attempt to connect to itself and ignore that. In other words, the same command line could be deployed in several hosts and the full mesh will properly form.

Note that you don't have to connect all servers to the same seed server, any server accepting a connection will inform other servers in the mesh about that new server so that they can connect to it. The advantage of the seed approach, is that you can deploy the same configuration to all hosts.

3-node example

The following example demonstrates how to run a cluster of 3 servers on the same host. We will start with the seed server and use the -D command line parameter to produce debug information.

See also clustered NATS for clustered NATS examples using Docker.

gnatsd -p 4222 -cluster nats://localhost:4248

Alternatively, you could use a configuration file, let's call it seed.conf, with a content similar to this:

# Cluster Seed Node

listen: 127.0.0.1:4222
http: 8222

cluster {
  listen: 127.0.0.1:4248
}

And start the server like this:

gnatsd -config ./seed.conf -D

This will produce an output similar to:

[75653] 2016/04/26 15:14:47.339321 [INF] Listening for route connections on 127.0.0.1:4248
[75653] 2016/04/26 15:14:47.340787 [INF] Listening for client connections on 127.0.0.1:4222
[75653] 2016/04/26 15:14:47.340822 [DBG] server id is xZfu3u7usAPWkuThomoGzM
[75653] 2016/04/26 15:14:47.340825 [INF] server is ready

It is also possible to specify the hostname and port independently. At least the port is required. If you leave the hostname off it will bind to all the interfaces ('0.0.0.0').

cluster {
  host: 127.0.0.1
  port: 4248
}

Now let's start two more servers, each one connecting to the seed server.

gnatsd -p 5222 -cluster nats://localhost:5248 -routes nats://localhost:4248 -D

When running on the same host, we need to pick different ports for the client connections -p, and for the port used to accept other routes -cluster. Note that -routes points to the -cluster address of the seed server (localhost:4248).

Here is the log produced. See how it connects and registers a route to the seed server (...GzM).

[75665] 2016/04/26 15:14:59.970014 [INF] Listening for route connections on localhost:5248
[75665] 2016/04/26 15:14:59.971150 [INF] Listening for client connections on 0.0.0.0:5222
[75665] 2016/04/26 15:14:59.971176 [DBG] server id is 53Yi78q96t52QdyyWLKIyE
[75665] 2016/04/26 15:14:59.971179 [INF] server is ready
[75665] 2016/04/26 15:14:59.971199 [DBG] Trying to connect to route on localhost:4248
[75665] 2016/04/26 15:14:59.971551 [DBG] 127.0.0.1:4248 - rid:1 - Route connection created
[75665] 2016/04/26 15:14:59.971559 [DBG] 127.0.0.1:4248 - rid:1 - Route connect msg sent
[75665] 2016/04/26 15:14:59.971720 [DBG] 127.0.0.1:4248 - rid:1 - Registering remote route "xZfu3u7usAPWkuThomoGzM"
[75665] 2016/04/26 15:14:59.971731 [DBG] 127.0.0.1:4248 - rid:1 - Route sent local subscriptions

From the seed's server log, we see that the route is indeed accepted:

[75653] 2016/04/26 15:14:59.971602 [DBG] 127.0.0.1:52679 - rid:1 - Route connection created
[75653] 2016/04/26 15:14:59.971733 [DBG] 127.0.0.1:52679 - rid:1 - Registering remote route "53Yi78q96t52QdyyWLKIyE"
[75653] 2016/04/26 15:14:59.971739 [DBG] 127.0.0.1:52679 - rid:1 - Route sent local subscriptions

Finally, let's start the third server:

gnatsd -p 6222 -cluster nats://localhost:6248 -routes nats://localhost:4248 -D

Again, notice that we use a different client port and cluster address, but still point to the same seed server at the address nats://localhost:4248:

[75764] 2016/04/26 15:19:11.528185 [INF] Listening for route connections on localhost:6248
[75764] 2016/04/26 15:19:11.529787 [INF] Listening for client connections on 0.0.0.0:6222
[75764] 2016/04/26 15:19:11.529829 [DBG] server id is IRepas80TBwJByULX1ulAp
[75764] 2016/04/26 15:19:11.529842 [INF] server is ready
[75764] 2016/04/26 15:19:11.529872 [DBG] Trying to connect to route on localhost:4248
[75764] 2016/04/26 15:19:11.530272 [DBG] 127.0.0.1:4248 - rid:1 - Route connection created
[75764] 2016/04/26 15:19:11.530281 [DBG] 127.0.0.1:4248 - rid:1 - Route connect msg sent
[75764] 2016/04/26 15:19:11.530408 [DBG] 127.0.0.1:4248 - rid:1 - Registering remote route "xZfu3u7usAPWkuThomoGzM"
[75764] 2016/04/26 15:19:11.530414 [DBG] 127.0.0.1:4248 - rid:1 - Route sent local subscriptions
[75764] 2016/04/26 15:19:11.530595 [DBG] 127.0.0.1:52727 - rid:2 - Route connection created
[75764] 2016/04/26 15:19:11.530659 [DBG] 127.0.0.1:52727 - rid:2 - Registering remote route "53Yi78q96t52QdyyWLKIyE"
[75764] 2016/04/26 15:19:11.530664 [DBG] 127.0.0.1:52727 - rid:2 - Route sent local subscriptions

First a route is created to the seed server (...GzM) and after that, a route from ...IyE - which is the ID of the second server - is accepted.

The log from the seed server shows that it accepted the route from the third server:

[75653] 2016/04/26 15:19:11.530308 [DBG] 127.0.0.1:52726 - rid:2 - Route connection created
[75653] 2016/04/26 15:19:11.530384 [DBG] 127.0.0.1:52726 - rid:2 - Registering remote route "IRepas80TBwJByULX1ulAp"
[75653] 2016/04/26 15:19:11.530389 [DBG] 127.0.0.1:52726 - rid:2 - Route sent local subscriptions

And the log from the second server shows that it connected to the third.

[75665] 2016/04/26 15:19:11.530469 [DBG] Trying to connect to route on 127.0.0.1:6248
[75665] 2016/04/26 15:19:11.530565 [DBG] 127.0.0.1:6248 - rid:2 - Route connection created
[75665] 2016/04/26 15:19:11.530570 [DBG] 127.0.0.1:6248 - rid:2 - Route connect msg sent
[75665] 2016/04/26 15:19:11.530644 [DBG] 127.0.0.1:6248 - rid:2 - Registering remote route "IRepas80TBwJByULX1ulAp"
[75665] 2016/04/26 15:19:11.530650 [DBG] 127.0.0.1:6248 - rid:2 - Route sent local subscriptions

At this point, there is a full mesh cluster of NATS servers.

Securing NATS

This section describes how to secure the NATS server, including authentication, authorization, and encryption using TLS and bcrypt.

Authentication

The NATS server supports single and multi-user/client authentication. See also the server authentication documentation.

Single-user Authentication

For single-user authentication, you can start the NATS server with authentication enabled by passing in the required credentials on the command line.

gnatsd --user derek --pass T0pS3cr3t

You can also enable single-user authentication and set the credentials in the server configuration file as follows:

authorization {
  user:        derek
  password: T0pS3cr3t
  timeout:  1
}

Clients can connect using:

nats://derek:T0pS3cr3t@localhost:4222

Token-based Authentication

A token is a unique identifier of an application requesting to connect to NATS. You can start the NATS server with authentication enabled by passing in the required token on the command line.

gnatsd -auth 'S3Cr3T0k3n!'

You can also enable token-based authentication and set the credentials in the server configuration file as follows:

authorization {
  #cleartext is supported but it is recommended you encrypt tokens with util/mkpasswd.go
  token:   S3Cr3T0k3n!
  timeout: 1
}

Clients can connect using:

nats://'S3Cr3T0k3n!'@localhost:4222

Encrypting passwords and tokens

Passwords and tokens ideally should be be encrypted with bcrypt. Anywhere in a configuration file you store a password or token, you should use the mkpasswd utility to encrypt the password or token and use that value instead.

Note that clients always use the password or token directly to connect, not the bcrytped value.

To do this, use the mkpasswd utility. You can pass the -p parameter to the mkpasswd utility to set your own password.

$ go run util/mkpasswd.go -p
Enter Password: <enter S3Cr3T0k3n!>
Reenter Password: <enter S3Cr3T0k3n!>
bcrypt hash: $2a$11$UP3xizk94sWF9SHF/wkklOfBT9jphTGNrhZqz2OHoBdk9yO1kvErG
}

For example, after encrypting S3Cr3T0k3n!, you would set the authorization server configuration as below.

authorization {
  # You can generate the token using /util/mkpasswd.go
  token:    $2a$11$UP3xizk94sWF9SHF/wkklOfBT9jphTGNrhZqz2OHoBdk9yO1kvErG
  timeout: 1
}

If you want the mkpasswd utility to generate a password or token for you, run it without the -p parameter.

$ go run util/mkpasswd.go
pass: D#6)e0ht^@61kU5!^!owrX // Password (or token) encrypted with Bcrypt
bcrypt hash: $2a$11$bXz1Mi5xM.rRUnYRT0Vb2el6sSzVrqA0DJKdt.5Itj1C1K4HT9FDG // server configuration authorization password (or token)

Multi-user authentication

You can enable multi-user authentication using a NATS server configuration file that defines user credentials (user and password), and optionally permissions, for two or more users. Multi-user authentication leverages variables.

authorization {
  users = [
    {user: value or $VARIABLE, password: value or $VARIABLE}
    {user: value or $VARIABLE, password: value or $VARIABLE, [permissions: $PERMISSION]}
    ...
  ]
}

For example:

authorization {
  PASS: abcdefghijklmnopqrstuvwxwz0123456789
  users = [
    {user: joe,     password: foo,   permissions: $ADMIN}
    {user: alice,   password: bar,   permissions: $REQUESTOR}
    {user: bob,     password: $PASS, permissions: $RESPONDER}
    {user: charlie, password: bar}
  ]
}

Authorization

The NATS server supports authorization using subject-level permissions on a per-user basis. Permission-based authorization is available with multi-user authentication. See also the Server Authorization documentation.

Before server 1.3.0, it was only possible to define permissions allowing an authenticated user to publish or subscribe to certain subjects. Starting with 1.3.0, it is now possible to also define permissions denying the right to publish or subscribe to specific subjects.

Each permission grant is an object with two fields: what subject(s) the authenticated user is allowed (or denied the right) to publish to, and what subject(s) the authenticated user is allowed (or denied the right) to subscribe to. The parser is generous at understanding what the intent is, so both arrays and singletons are processed. Subjects themselves can contain wildcards. Permissions make use of variables.

You set permissions by creating an entry inside of the authorization configuration block that conforms to the following syntax:

authorization {
  PERMISSION_NAME = {
    publish = {
      allow = "singleton" or ["array", ...]
      deny  = "singleton" or ["array", ...]
    }
    subscribe = {
      allow = "singleton" or ["array", ...]
      deny  = "singleton" or ["array", ...]
    }
  }
}

Note that the old definition is still supported. The absence of allow or deny means that this is an allow permission.

authorization {
  PERMISSION_NAME = {
    publish = "singleton" or ["array", ...]
    subscribe = "singleton" or ["array", ...]
  }
}

Here is an example authorization configuration that defines four users, three of whom are assigned explicit permissions.

authorization {
  ADMIN = {
    publish = ">"
    subscribe = ">"
  }
  REQUESTOR = {
    publish = ["req.foo", "req.bar"]
    subscribe = "_INBOX.>"
  }
  RESPONDER = {
    subscribe = ["req.foo", "req.bar"]
    publish = "_INBOX.>"
  }
  DEFAULT_PERMISSIONS = {
    publish = "SANDBOX.*"
    subscribe = ["PUBLIC.>", "_INBOX.>"]
  }

  PASS: abcdefghijklmnopqrstuvwxwz0123456789
  users = [
    {user: joe,     password: foo,   permissions: $ADMIN}
    {user: alice,   password: bar,   permissions: $REQUESTOR}
    {user: bob,     password: $PASS, permissions: $RESPONDER}
    {user: charlie, password: bar}
  ]
}

Since Joe is an ADMIN he can publish/subscribe on any subject. We use the wildcard “>” to match any subject.

Alice is a REQUESTOR and can publish requests on subjects "req.foo" or "req.bar", and subscribe to anything that is a response ("_INBOX.>").

Charlie has no permissions granted and therefore inherits the default permission set. You set the inherited default permissions by assigning them to the default_permissions entry inside of the authorization configuration block.

Bob is a RESPONDER to any of Alice's requests, so Bob needs to be able to subscribe to the request subjects and respond to Alice's reply subject which will be an "_INBOX.>".

Important to note, in order to not break request/reply patterns you need to add rules as above with Alice and Bob for the "_INBOX.>" pattern. If an unauthorized client publishes or attempts to subscribe to a subject that is not in the allow-list, or is in the deny-list, the action fails and is logged at the server, and an error message is returned to the client.

Most of the time it is fine to specify the subjects that a user is allowed to publish or subscribe to. However, in some instances, it is much easier to configure the subjects that a user is not allowed to publish/subscribe.

Note that the allow clause is not required. If absent, it means that user is allowed to publish/subscribe to everything.

Here is an example showing how to use allow and deny clauses.

authorization {
    myUserPerms = {
      publish = {
        allow = "*.*"
        deny = ["SYS.*", "bar.baz", "foo.*"]
      }
      subscribe = {
        allow = ["foo.*", "bar"]
        deny = "foo.baz"
      }
    }
    users = [
        {user: myUser, password: pwd, permissions: $myUserPerms}
    ]
}

The above configuration means that user myUser is allowed to publish to subjects with 2 tokens (allow = "*.*") but not to the subjects matching SYS.*, bar.baz or foo.*. The user can subscribe to subjects matching foo.* and subject bar but not foo.baz. Without the deny clause, you would have to explicitly list all the subjects the user can publish (and subscribe) without the ones in the deny list, which could prove difficult if the set size is huge.

Authorization and Clustering

The NATS server also supports route permissions. Route permissions define subjects that are imported and exported between individual servers in a cluster. Permissions may be defined in the cluster configuration using the import and export clauses. This enables a variety of use cases, allowing for configurations that will enforce a directional flow of messages or only allow a subset of data.

The following two server configurations will restrict messages that can flow between servers and allow a directional flow of messages:

Edge Server

cluster {
  listen: 4244

  authorization {
    user: ruser
    # bcrypted hash of "top_secret"
    password: $2a$11$UaoHwUEqHaMwqo6L4kM2buOBnGFnSCWxNXY87hl.kCERqKK8WAXM.
    timeout: 3
  }

  permissions {
    import:["_INBOX.>", "global.>"]
    export:["_INBOX.>", "global.>", "sensors.>"]
  }

  routes = [
    nats-route://ruser:top_secret@cloudserver:4344
  ]
}

Cloud Server

cluster {
  listen: 4244

  authorization {
    user: ruser
    # bcrypted hash of "top_secret"
    password: $2a$11$UaoHwUEqHaMwqo6L4kM2buOBnGFnSCWxNXY87hl.kCERqKK8WAXM.
    timeout: 3
  }

  permissions {
    import:["_INBOX.>", "global.>", "sensors.>"]
    export:["_INBOX.>", "global.>"]
  }

  routes = [
    nats-route://ruser:top_secret@edgeserver:4244
  ]
}

The example above allows request/reply and messages published to any subject matching global.> to be freely propagated throughout the cluster. The cloud server imports and locally delivers messages published to subjects matching sensors.>, but won't export messages published to subjects matching sensors.>. This enforces a directional flow of sensor data from edge servers to the cloud servers. Also, as new edge servers are added they will not receive sensor data from other edge servers. Importing and exporting subjects in server clustering can provide additional security and optimize use of network resources.

Note: When first introduced, the permissions block had to be defined in the authorization block forcing a cluster user to be defined in order for permissions to work. This has been changed and the permissions block is now moved to the top-level cluster block, allowing use of subject permissions even without the presence of an authorization block. If permissions are defined in both authorization and top-level cluster blocks, the content of permissions in the authorization block is ignored. It is recommended that the configuration files be updated to move the permissions to the top-level block.

TLS

The server can use modern TLS semantics for client connections, route connections, and the HTTPS monitoring port. The server requires TLS version 1.2, and sets preferences for modern cipher suites that avoid known vulnerabilities.

func defaultCipherSuites() []uint16 {
	return []uint16{
		tls.TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,
		tls.TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305,
		tls.TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,
		tls.TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,
		tls.TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,
		tls.TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,
	}
}

The curve preferences are also re-ordered to provide the most secure environment available, and are as follows:

func defaultCurvePreferences() []tls.CurveID {
	return []tls.CurveID{
		tls.CurveP521,
		tls.CurveP384,
		tls.X25519, // faster than P256, arguably more secure
		tls.CurveP256,
	}
}

Generating self signed certs and intermediary certificate authorities is beyond the scope here, but this document can be helpful in addition to Google Search: https://docs.docker.com/engine/articles/https/.

The server requires a certificate and private key. Optionally the server can require that clients need to present certificates, and the server can be configured with a CA authority to verify the client certificates.

# Simple TLS config file

listen: 127.0.0.1:4443

tls {
  cert_file:  "./configs/certs/server-cert.pem"
  key_file:   "./configs/certs/server-key.pem"
  timeout:    2
}

authorization {
  user:     derek
  password: $2a$11$W2zko751KUvVy59mUTWmpOdWjpEm5qhcCZRd05GjI/sSOT.xtiHyG
  timeout:  1
}

If requiring client certificates as well, simply change the TLS section as follows.

tls {
  cert_file: "./configs/certs/server-cert.pem"
  key_file:  "./configs/certs/server-key.pem"
  ca_file:   "./configs/certs/ca.pem"
  verify:    true
}

When setting up clusters, all servers in the cluster, if using TLS, will both verify the connecting endpoints and the server responses. So certificates are checked in both directions. Certificates can be configured only for the server's cluster identity, keeping client and server certificates separate from cluster formation.

cluster {
  listen: 127.0.0.1:4244

  tls {
    # Route cert
    cert_file: "./configs/certs/srva-cert.pem"
    # Private key
    key_file:  "./configs/certs/srva-key.pem"
    # Optional certificate authority verifying connected routes
    # Required when we have self-signed CA, etc.
    ca_file:   "./configs/certs/ca.pem"
  }
  # Routes are actively solicited and connected to from this server.
  # Other servers can connect to us if they supply the correct credentials
  # in their routes definitions from above.
  routes = [
    nats-route://127.0.0.1:4246
  ]
}

The server can be run using command line arguments to enable TLS functionality.

--tls                        Enable TLS, do not verify clients (default: false)
--tlscert FILE               Server certificate file
--tlskey FILE                Private key for server certificate
--tlsverify                  Enable TLS, verify client certificates
--tlscacert FILE             Client certificate CA for verification

Examples using the test certificates which are self signed for localhost and 127.0.0.1.

> ./gnatsd --tls --tlscert=./test/configs/certs/server-cert.pem --tlskey=./test/configs/certs/server-key.pem -D

[85428] 2019/02/07 16:20:25.659950 [INF] Starting nats-server version 1.4.1
[85428] 2019/02/07 16:20:25.660012 [DBG] Go build version go1.11.5
[85428] 2019/02/07 16:20:25.660025 [INF] Git commit [not set]
[85428] 2019/02/07 16:20:25.660178 [INF] Listening for client connections on 0.0.0.0:4222
[85428] 2019/02/07 16:20:25.660184 [INF] TLS required for client connections
[85428] 2019/02/07 16:20:25.660187 [DBG] Server id is 9iqagKy99nXXCF1GtkE7hC
[85428] 2019/02/07 16:20:25.660189 [INF] Server is ready

Notice that the log indicates that the client connections will be required to use TLS. If you run the server in Debug mode with -D or -DV, the logs will show the cipher suite selection for each connected client.

[85428] 2019/02/07 16:22:11.083174 [DBG] ::1:61545 - cid:2 - Client connection created
[85428] 2019/02/07 16:22:11.083246 [DBG] ::1:61545 - cid:2 - Starting TLS client connection handshake
[85428] 2019/02/07 16:22:11.095318 [DBG] ::1:61545 - cid:2 - TLS handshake complete
[85428] 2019/02/07 16:22:11.095332 [DBG] ::1:61545 - cid:2 - TLS version 1.2, cipher suite TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256

If you want the server to enforce and require client certificates as well via the command line, utilize this example.

> ./gnatsd --tlsverify --tlscert=./test/configs/certs/server-cert.pem --tlskey=./test/configs/certs/server-key.pem --tlscacert=./test/configs/certs/ca.pem

Bcrypt

In addition to TLS functionality, the server now also supports bcrypt for passwords and tokens. This is transparent and you can simply replace the plaintext password in the configuration with the bcrypt hash, the server will automatically utilize bcrypt as needed.

There is a utility bundled under /util/mkpasswd. By default with no arguments it will generate a secure password and the associated hash. This can be used for a password or a token in the configuration. If you already have a password selected, you can supply that on stdin with the -p flag.

~/go/src/github.com/nats-io/gnatsd/util> ./mkpasswd
pass: #IclkRPHUpsTmACWzmIGXr
bcrypt hash: $2a$11$3kIDaCxw.Glsl1.u5nKa6eUnNDLV5HV9tIuUp7EHhMt6Nm9myW1aS

Add into the server configuration file's authorization section.

  authorization {
    user: derek
    password: $2a$11$3kIDaCxw.Glsl1.u5nKa6eUnNDLV5HV9tIuUp7EHhMt6Nm9myW1aS
  }

Monitoring

If the monitoring port is enabled, the NATS server runs a lightweight HTTP server that has the following endpoints: /varz, /connz, /routez, and /subsz. All endpoints return a JSON object. See NATS Server monitoring for endpoint examples.

To see a demonstration of NATS monitoring, run a command similar to the following for each desired endpoint:

curl demo.nats.io:8222/varz

To enable the monitoring server, start the NATS server with the monitoring flag -m (or -ms) and specify the monitoring port.

Monitoring options

-m, --http_port PORT             HTTP PORT for monitoring
-ms,--https_port PORT            Use HTTPS PORT for monitoring (requires TLS cert and key)

To enable monitoring via the configuration file, use host:port (there is no explicit configuration flag for the monitoring interface).

For example, running the gnatsd -m 8222 command, you should see that the NATS server starts with the HTTP monitoring port enabled. To view the monitoring home page, go to http://localhost:8222/.

[86236] 2019/02/07 16:22:42.464071 [INF] Starting nats-server version 1.4.1
[86236] 2019/02/07 16:22:42.464132 [INF] Git commit [not set]
[86236] 2019/02/07 16:22:42.464334 [INF] Starting http monitor on 0.0.0.0:8222
[86236] 2019/02/07 16:22:42.464390 [INF] Listening for client connections on 0.0.0.0:4222
[86236] 2019/02/07 16:22:42.464395 [INF] Server is ready

Community and Contributing

NATS has a vibrant and friendly community. If you are interested in connecting with other NATS users or contributing, read about our community on NATS.io.

NATS Office Hours

NATS Office Hours will be on hiatus for the US summer season. Please join our Slack channel or Google Group to chat with our maintainers.

License

Unless otherwise noted, the NATS source files are distributed under the Apache Version 2.0 license found in the LICENSE file.

FOSSA Status

Documentation

The Go Gopher

There is no documentation for this package.

Directories

Path Synopsis
Package conf supports a configuration file format used by gnatsd.
Package conf supports a configuration file format used by gnatsd.
Package logger provides logging facilities for the NATS server
Package logger provides logging facilities for the NATS server
Package sublist is a routing mechanism to handle subject distribution and provides a facility to match subjects from published messages to interested subscribers.
Package sublist is a routing mechanism to handle subject distribution and provides a facility to match subjects from published messages to interested subscribers.
pse

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL