raspi

package
v1.3.0 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Mar 22, 2017 License: Apache-2.0, Apache-2.0 Imports: 10 Imported by: 0

README

Raspberry Pi

The Raspberry Pi is an inexpensive and popular ARM based single board computer with digital & PWM GPIO, and i2c interfaces built in.

The Gobot adaptor for the Raspberry Pi should support all of the various Raspberry Pi boards such as the Raspberry Pi 3 Model B, Raspberry Pi 2 Model B, Raspberry Pi 1 Model A+, and Raspberry Pi Zero.

We recommend updating to the latest Raspian Jessie OS when using the Raspberry Pi, however Gobot should also support older versions of the OS, should your application require this.

For more info about the Raspberry Pi platform, click here.

How to Install

go get -d -u gobot.io/x/gobot/... && go install gobot.io/x/gobot/platforms/raspi

How to Use

The pin numbering used by your Gobot program should match the way your board is labeled right on the board itself.

package main

import (
        "time"

        "gobot.io/x/gobot"
        "gobot.io/x/gobot/drivers/gpio"
        "gobot.io/x/gobot/platforms/raspi"
)

func main() {
        r := raspi.NewAdaptor()
        led := gpio.NewLedDriver(r, "7")

        work := func() {
                gobot.Every(1*time.Second, func() {
                        led.Toggle()
                })
        }

        robot := gobot.NewRobot("blinkBot",
                []gobot.Connection{r},
                []gobot.Device{led},
                work,
        )

        robot.Start()
}

How to Connect

Compiling

Simply compile your Gobot program like this:

$ GOARM=6 GOARCH=arm GOOS=linux go build examples/raspi_blink.go

Use the following GOARM values to compile depending on which model Raspberry Pi you are using:

GOARM=6 (Raspberry Pi A, A+, B, B+, Zero) GOARM=7 (Raspberry Pi 2, 3)

Once you have compiled your code, you can simply upload your program over the network from your host computer to the Raspi

$ scp raspi_blink pi@192.168.1.xxx:/home/pi/

and execute it on your Raspberry Pi with

$ ./raspi_blink
Enabling PWM output on GPIO pins.

For extended PWM support on the Raspberry Pi, you will need to use a program called pi-blaster. You can follow the instructions for pi-blaster install in the pi-blaster repo here:

https://github.com/sarfata/pi-blaster

Documentation

Overview

Package raspi contains the Gobot adaptor for the Raspberry Pi.

For further information refer to raspi README: https://github.com/hybridgroup/gobot/blob/master/platforms/raspi/README.md

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

This section is empty.

Types

type Adaptor added in v1.0.0

type Adaptor struct {
	// contains filtered or unexported fields
}

Adaptor is the Gobot Adaptor for the Raspberry Pi

func NewAdaptor added in v1.0.0

func NewAdaptor() *Adaptor

NewAdaptor creates a Raspi Adaptor

func (*Adaptor) Connect added in v1.0.0

func (r *Adaptor) Connect() (err error)

Connect starts connection with board and creates digitalPins and pwmPins adaptor maps

func (*Adaptor) DigitalRead added in v1.0.0

func (r *Adaptor) DigitalRead(pin string) (val int, err error)

DigitalRead reads digital value from pin

func (*Adaptor) DigitalWrite added in v1.0.0

func (r *Adaptor) DigitalWrite(pin string, val byte) (err error)

DigitalWrite writes digital value to specified pin

func (*Adaptor) Finalize added in v1.0.0

func (r *Adaptor) Finalize() (err error)

Finalize closes connection to board and pins

func (*Adaptor) GetConnection added in v1.2.0

func (r *Adaptor) GetConnection(address int, bus int) (connection i2c.Connection, err error)

GetConnection returns an i2c connection to a device on a specified bus. Valid bus number is [0..1] which corresponds to /dev/i2c-0 through /dev/i2c-1.

func (*Adaptor) GetDefaultBus added in v1.2.0

func (r *Adaptor) GetDefaultBus() int

GetDefaultBus returns the default i2c bus for this platform

func (*Adaptor) Name added in v1.0.0

func (r *Adaptor) Name() string

Name returns the Adaptor's name

func (*Adaptor) PwmWrite added in v1.0.0

func (r *Adaptor) PwmWrite(pin string, val byte) (err error)

PwmWrite writes a PWM signal to the specified pin

func (*Adaptor) ServoWrite added in v1.0.0

func (r *Adaptor) ServoWrite(pin string, angle byte) (err error)

ServoWrite writes a servo signal to the specified pin

func (*Adaptor) SetName added in v1.0.0

func (r *Adaptor) SetName(n string)

SetName sets the Adaptor's name

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL